Hey,
I'm running this http://forum.xda-developers.com/showthread.php?t=905060 on my HD2.
Was working fine today, then my phone ran out of battery. I charged it a bit, and now when I turn it on, it gets to the splash screen, and then the green "HTC" screen, and it doesnt go any further from that.
Now i'm not sure how I can fix this? I have a SD card adaptor, so can I do it with that somehow?
Cheers
Is it the white screen with the green logo? If yes then MAGDLR or clK seems to be damaged, I would say that the only solution then is a reinstallation of MAGDLR or clK..
If it is the other screen (black and green logo) then your android is not able to boot properly. There I would first try to whipe the cache over the CWM Recovery
Yeah the black background...
That doesn't seem to work either though, is there an easy way to literally just wipe everything and start over?
What were you using? MAGLDR or cLK ?
I´m not sure but the option Whipe data/factory reset will bring your phone to the state like it was when you installed your last rom, as far as I understood it. So you only need to make your settings and get your apps again. If that doesnt work then you need to reinstall the rom you used again.
Related
Okay, basicly let me explain what heppend yessterday:
I dropped my phone on the screen from like 15 cm, on wooden floor, but badly it fall on the screen. Then i wannted to see if the phone is ok, i turned it on and then tried slide the unlock, but basicly what heppend is the touchscreen didnt work. Then it turned off (the screen) but when i press button, it still lighted. So i tought, if i would press the resset button and boot it agian all will be fine.. But i booted it, and the magldr just did it work, it tryed boot it to android i had TyphooN Cyanogen Mod, but sadly it didnt boot. It just at the "Go go go!" part. I was like what the **** are you kidding me, so i did agian and no luck. So i contacted my friend that has hd2 and knows about these stuff. He just told me to do task 29, that didnt work so i downloaded the toolkit, but it didnt work too, i formatted, this time i tryed install cwm freshly, just to install my typhoon agian right, so my friend told me to go to the ad recovery, and just install it from zip.. it stuck at go go go agian. Now i really dont frking know what heppend, i tryed taking battery out, as my friend said - no luck. Is there anything else i can do, or my hd2 is totally died
i will donate if someone will seriously help me!
format your sd with panasonic sd formatter. then make task29-flash mgldr-flash radio-flash cwr and flash rom. if not boot then change rom to another one.
In cwm perform a "wipe data / factory reset"
This will clear the system folders on the ext and fat partitions of the SD card, and the data on the nand. Sometimes a rom wont boot if there are leftovers in those folders.
i cant even go on cwm...
well thx, ill try it anyway, with help of my friend
TotalErikas said:
i cant even go on cwm...
Click to expand...
Click to collapse
if you cant goin to CWM,
when you at MAGLDR menu
you Choose USB Flasher
(must use Volume down/Volume up button, then press Call button)
(if the buttons cant, you must sent it to repair...)
and connet it to pc to re-flash any new CWM...
i reflashed cwm hundred of times, i also formatted the whole phone and that didnt work
and buttons did work
TotalErikas said:
i reflashed cwm hundred of times, i also formatted the whole phone and that didnt work
and buttons did work
Click to expand...
Click to collapse
Any luck with your issue TotalErikas? I had the same problem, I didn't drop my phone, but somehow screen just froze when I turn on from sleep and I thought restarting solves the issue then..... stuck on go!go!go! screen... tried task 29, flash rom, flash magldr, flash recovery, flash cLK... nothing works... I really hope it's not hardware issue... I already paid loads to replace screen twice.... Please share if you have any luck with yours! thanks~
I just fixed mine. The problem is not any how with screen or something. Its all about battery contact, remove the battery and push those three things that gives contact, to boot the screen and stuf..
Hey guys,
First of all, sorry for my bad english
I broke the Display of my HD2 last week. Now I want so sell it as defect.
The question is: Is there any possibility to wipe my Data with the broken Display ?
Here are some facts:
- CWM
- Android in Nand
- Display is black
- Phone seems to work
Best regards, Kristian
If you go into tri color bootloader... can you somewhat tell it enters tri color??...
I have a leoimg.nbh file that returns android to stock window... it wiped everything... so I'm trying to put a stock rom on top of a stock rom... testing to see if it erase everything
It worked... everything was like it just came out of the box...
Because your screen is black... do the same procedure like you would to enter bootloader tri color... with the .nbh file in the root of SD... wait a min... I know its long but be on the safe side.. then hit the power button... then your phone should start erasing everything... wait 15min... cross your finger and hope everything did erase ;-)
Thank you for the answer
Will this *.nbh also wipe my sdcard? In this case I could check, whether the full wipe worked or not.
Greets Kris
It won't wipe your SD card... just wipe everything from your phone... like starting from scratch...
But because the screen is still black... I can not really tell you how else to check that you successfully wipe everything from your phone... I can only confirm that returning the phone back to stock with .nbh file will start the phone from scratch...
okay you guys, i dont know if im posting in the right section or not.. but i figured it would be good to post in the general section.
i have a tmobile hd2... it wont boot. sometimes i get the tmo bootscreen and it gets stuck there, other times its unresponsive, and other times it vibrates seven times and the screen never turns on..
i just want to mae this thing functional again. is there any way i can bring this device back to stock? whether its with a windows rom, or android rom, i really dont care.. lol i just need help. anything would be greatly appreciated.
if you have wp7 on it...your problem is because of incompatible sd card..try another sd card and hard reset
GunbladeGriever said:
okay you guys, i dont know if im posting in the right section or not.. but i figured it would be good to post in the general section.
i have a tmobile hd2... it wont boot. sometimes i get the tmo bootscreen and it gets stuck there, other times its unresponsive, and other times it vibrates seven times and the screen never turns on..
i just want to mae this thing functional again. is there any way i can bring this device back to stock? whether its with a windows rom, or android rom, i really dont care.. lol i just need help. anything would be greatly appreciated.
Click to expand...
Click to collapse
Just thinking it could be a bad battery, but more info would be helpful.
Or check if battery pin is bent
Sent from my HTC HD2 with WP7.5/android miui using tapatalk
battery and pins are fine... th sd card was working before but now the phone seems to have been condemed.. any information you would need just feel free to ask, i dont really know what to tell you guys since i dont know whats wrong with it
I managed to get to the rgb screen.. I'm guessing hspl is installed, because it says hspl on the screen lol.. Any suggestions on what I should do from here?
Sent from my PG86100 using XDA App
that happened to my phone once. i thought my battery was fried or something, but it turned out that my pins were bent. works fine now.
if you can get to the RGB screen, your phone is still safe i believe. Try getting a compatible SD card and then try and flash another WP7 rom. Also make sure your HSPL is 2.08. Anything otherwise, won't boot also.
HSPL must be 2.08.... if any other version, WP7 wont boot... but most of problems in sdcard compatible
task 29, and reinstall hspl , than magdlr. also make sure of bad blocks.
okay, at first i tried an ruu that i got directly from tmo but it would always hang at 8%... then i ran the task 29 file and it went through 100%... im gonna let the battery charge for a little bit since i dont want anything else to go wrong... im going to search on how to install hspl and everything else.. im asuming that i need an sd card for this lol. thanks everyone for the help!
Please Help! After “123456 GoGoGo” the screen goes dark and reboots; endlessly.
Guys I’m having a similar problem. I had “XBmod-Yuki 2.1” loaded yet I was experiencing sporadic reboots.
I decided to re-flash using the SD card advice provided by XDA site. I purchased a new compatible SanDisk 16gb.
While following the XDA instructions to the letter, I completed the “Flash the ROM with DWI” step (w/ SD Removed) and my phone is now on an endless reboot loop. After “123456 GoGoGo” the screen goes dark and reboots; endlessly.
The phone is not bricked because I can still re-flash the TMO stock 3.14. Yet when I try again, after “123456 GoGoGo” the screen goes dark and reboots; endlessly.
I love Windows Phone 7.5 Mango and I must restore my phone to its glory…
Please help! What do I do to get pass this paralyzing issue???
insert card to phone and turn on with Volume Up + Down + Power together.... when white screen shows, follow instructions on screen...
Please Help! After “123456 GoGoGo” the screen goes dark and reboots; endlessly.
Thanks for the reply DXDY...
I tried what you suggested. The master reboot completed and the phone rebooted into the same endless reboot loop.
My steps have been to:
reflash stock 3.14; allow complete boot up
install magldar113_daf
delete mbr using magldr113
Enable 24MB extra memory in Magldr services
Flash the rom with DWI...
after i flash the rom it reboots in to the endless loop. it never completes a boot up cycle. Right after "123456 GoGoGo" the "tomobile "stick together" logo flashes and the phone reboots; endlessly...
I have tried different roms; exact same behavior...
it has to be something simple because, the phone is not bricked; I can still re-flash the TMO stock 3.14. The stock ROM works perfectly and my SD card (Sandisk 16gb class 4) still works perfectly also...
Any help you can provide is greatly appreciated...
only problem then is SDcard.... try boot without sdcard for test.....
Please Help! After “123456 GoGoGo” the screen goes dark and reboots; endlessly.
i have tried reflashing with the SD card in the device and with the SD card removed. Once before i was able to flash the either way (with or without - both ways worked before). Now immediatley after reboot the device enters endless reboot loop...
any help is appriciated...
try with NAND toolkit... http://forum.xda-developers.com/showpost.php?p=19931919&postcount=501
wipe NAND with Task29, check and install again HSPL 2.08
flash WM6.5
flash MAGLDR
after that flash WP7
dont know which other to advice you...
melcad Please Help! After “123456 GoGoGo” the screen goes dark and reboots; endless
what is task29? i understand the other items. i just need clarification on task29...
Task 29 formats the partition drive of your device where the ROM resides.
it's cleaning partition, removing any leftover junks thereby giving a fresh partition for the ROM to operate
Please Help! After “123456 GoGoGo” the screen goes dark and reboots; endlessly.
Wow, that did it! the task29 cleaned up the NAND as you said and allowed me to reflash WP7...
One last question; when updating WP7 using the cab sender method; may I remove the languages that i dont need from the RAR pack???
incompatible sd card....change and try again with another sd card
dont remove the language cabs...preferred to keep them in
H,
I'm having a problem with my HTC HD2.
It was running Android, but after a reboot the HTC does not start up anymore completely, it stops in the first screen.
I can't access the HTC via USB, can't get the tri color screen, but can acces the MAGDLR menu when I keep the power button pressed.
In the MAGDLR menu I tried to re-install the Android ROM, but this does not solve the problem.
Also tried to have the HTC for several hours/days without battery, but also no luck.
Anybody any idea what the problem can be, and how this can be solved ?
Thanks
When you did a reboot the first time, did you remove the battery?
If yes, check the battery pins on your phone.
Thanks, pins are ok. Also switched battery, and had the phone without battery several days.
Htc was working with android for 3 months till i turned of the power normally and rebooted. Than it got stucked in the first screen
Can you move up and down when you get in in magldr? What are you last flashing?
Moving up and down in Mgld is no problem, on the USB Flash I could re/install the ROM.
But no changes, phone is not booting any further than the first screen
Hi,I have a problem with my HTC hd2 which is when I insert the battery the phone boot up without me even pressing the on button.So was just wondering is there anyone that knows a fix for this problem I'm facing?thanx
Sorry but your problem is strange for me, I suggest you to reset all the phone starting with the task29 to erase the internal rom.
Make a backup of anything you want first then i would start with just a fresh download and install of the ROM your using. If that don't work then I would suggest what adone.h has said to try. Don't forget to wipe data, cache, and delvic if using Android.
Ok thanx for that adobe.h and htccraze, I will give then both a try and keep u posted on what happens.thanx
hmmmm i thought it was common for HD2 to do that or is it only during those HSPL/ radio update this would happen.
OK mengfei,but when i flash a new android rom the nand way and its all booted up and everything,then i press the power button i dont get the screen so the turn the phone off or restart it.Any answers?
Eject battery, let it out for some minutes.
Reset the OS.
If these things above won't work, you have to install a new OS (maybe bootloader has some problems, too). I had this problem, too. Got rid of it by removing the battery for a longer time. Now everything is fine.
it's a weird phenomenom
i got the same problem when i firstly got the HD2
but it automatically disappeared last month after i flash several wp7 roms
I have the same problem
It is a hardware problem in the digitiser/cable/button area.
My touch screen failed, when I got the repaired phone, I had the same symptoms - battery in phone on. Also pressing just the volume down button would boot into the tri-colour screen. This happened with windows or android flashed into nand.
Odd thing was that running the key test function in magldr seemed to work and the power button operated normally as far I could tell when powered up into windows or android.
I sent the phone back for repair again and got a refurb replacement.
I have tried to flash a windows 7 Rom to cure the problem mario_net,but when I trying to flash the Rom it just keeps coming up error near the end of the flashing process.Have u any answers people?
CR5N,just wondered how do u do the key test function in magldr?
DAZZA35 said:
CR5N,just wondered how do u do the key test function in magldr?
Click to expand...
Click to collapse
Apologies, it is under advanced -> key test in cwm (I'm on 5.0.2.6) accessed via magldr recovery.
Let it out for some minutes don't insert battery immediately after removed.