Related
I rooted my phone successfully and installed clockwork recovery ROM manager 3.0.0.5, and have been running gingerbread since, However I miss Sense UI sometimes.
Now I am trying to go back to carrier 2.2.1 (stock tmobile mytouch 4g) , but am having no luck finding the correct ROM. All I have seen on the internet is the pre OTA rom 2.2 , but I wanna go back to 2.2.1 (just the way I got it, because I fear that I won't get the OTA to 2.2.1 because of the 3rd party ROM Manager) .
So here is a breakdown :
This is what I am looking for
A 2.2.1 tmobile mytouch 4g ROM
I understand that flashing this Rom will un-root the phone.
Here is something I have confusion about (which was largely cleared by article "[MOD] EZ Clockwork 3.0.0.6 Install>>Newest CwM Recovery and Stock Recovery included")
Will I be able to get Tmobile's OTA upgrade when gingerbread 2.3 comes out ? even with the 3rd party rom manager installed, is there a way to go back to the original tmobile rom manager, I should have done my research in the beginning, I do not even know what it is called?
Please help
Well first of all I have to ask why do you want to go back to stock? Are you aware of Ice Glacier? Its clean stable and runs better out of the box.
Now if you want Ice Glacier then go down to Dev section and download v1.1.6 and give it a try. Taking it that you didn't use it but if you have and you would still like to go back to stock then go to Dev section and find the stock PD15IMG as it will revert you back to stock rom and radio along will disable s-off. As I am on MT4G I can't link it but the thread is by football just go to the end page and download it from the link I posted which can be found on Phatless's sig. Keep in mind it's same thing but the link posted in OP is unstable as it takes forever to download.
If you don't know how to use it then ill tell you anyways just download the PD15IMG.zip and put it in root of your SDCard and then go in to bootloader and follow the screen, keep in mind this is not done though recovery.
Sent from my HTC Glacier
kpdadroid said:
So here is a breakdown :
This is what I am looking for
A 2.2.1 tmobile mytouch 4g ROM
I understand that flashing this Rom will un-root the phone.
Here is something I have confusion about (which was largely cleared by article "[MOD] EZ Clockwork 3.0.0.6 Install>>Newest CwM Recovery and Stock Recovery included")
Will I be able to get Tmobile's OTA upgrade when gingerbread 2.3 comes out ? even with the 3rd party rom manager installed, is there a way to go back to the original tmobile rom manager, I should have done my research in the beginning, I do not even know what it is called?
Please help
Click to expand...
Click to collapse
Did you do a nandroid backup of your phone prior to flashing CM7?
If you did you can flash the 3.0.0.6 Recovery image or use True_Blues .ZIP
If you did just flash back to the supplied ROM when u bought the phone.
With recovery 3.0.0.6 you can flash back to your stock sense ROM and keep the rooted end of things.
If you do go back to 100% stock and flash the PD15IMG you will go back to 100% stock in every way fit form and function. And yes you will get T-Mobiles 2.3 update when and if they decided to come out with it.
Even if you do keep root access T-Mobile will try to push the new OS to your phone. but i would HIGHLY HIGHLY suggest either going back to stock prior to accepting the OTA. Or keep your Root status and use a variant of their ROM.
"Are you aware of Ice Glacier? Its clean stable and runs better out of the box.
"
No Sir, I do not know what this is , the only thing I have tried so far is CM7, I would love to try Ice Glacier today.
Is it Gingerbread or is it Froyo ? Does it work with clockwork recovery Mod 3.0.0.6 ?
Thank you
(*meanwhile off to find what Iced Glacier is)
neidlinger,
thank you for the reply, I think I understand this better now.
blackshelf,
" keep in mind this is not done though recovery"
Thank you for this information, I will keep this in mind if I want to go to stock mytouch 4g after trying Iced Glacier.
Will let you know soon.
blackshelf,
does it matter what ROM I am on while flashing Iced Glacier?
Thank you much.
kpdadroid said:
"Are you aware of Ice Glacier? Its clean stable and runs better out of the box."
No Sir, I do not know what this is , the only thing I have tried so far is CM7, I would love to try Ice Glacier today.
Is it Gingerbread or is it Froyo ? Does it work with clockwork recovery Mod 3.0.0.6 ?
Thank you
(*meanwhile off to find what Iced Glacier is)
Click to expand...
Click to collapse
Iced Glacier is 2.2.1 (FroYo) based ROM that based off the OE from T-Mobile. Personally i am a AOSP fan. Regardless of 2.2 or 2.3, and do not like the bloat that comes with Sense.... .But i've heard alot of GOOD reviews regarding I/G. I'd recommend flashing the 3.0.0.6 then giving it a run.
Sorry was away but to add to what neidlinger said as he covered most of it. IG is based on stock but with few things added and removed thus balancing stability and performance. I think you will enjoy it also it has built in OC kernel (Gorilla v0.5 @ 1.7ghz). And no it does not matter what rom you had installed but I highly recommend you do full total wipe and then flash the rom via newest CWM so you can swtich between 2.X and 3.X based roms.
Sent from my HTC Glacier
Thank you! I am done flashing and now it is stuck in the ANDROID screen with the light at the bottom going left to right.... is this normal for it to hang on for so liong its been about 2 minutes?
Oops I am so impateint, but I am a noob and it freaking scres me because I have read about "bricked phones too many times", but now I am in and am setting up the phone. Looks like Iced Glacier will do just fine for me, I think I am however going to miss the android 2.3's battery life (vanilla install CM7) .. and surprisingly I also miss the gingerbread keyboard already, I am ready to download it from the market.
Thank a bunch to both of you.
What is AOSP? do you mean vanilla Android?
kpdadroid said:
Oops I am so impateint, but I am a noob and it freaking scres me because I have read about "bricked phones too many times", but now I am in and am setting up the phone. Looks like Iced Glacier will do just fine for me, I think I am however going to miss the android 2.3's battery life (vanilla install CM7) .. and surprisingly I also miss the gingerbread keyboard already, I am ready to download it from the market.
Thank a bunch to both of you.
What is AOSP? do you mean vanilla Android?
Click to expand...
Click to collapse
AOSP = Android Open Source Project. It's as basic Android as one can get. Sense is nice. But i don't use Facebook or Twitter (anymore) so i have no need for the added bloat.
Lol believe it or not IG has the most and I do mean most stable and efficient power consumption than CM7 once you set it up correctly. Play with it and add things to it as most of the apps you can install on it as you had on CM7. Far as AOSP goes you been using it on CM7(ASOP2.3.2:GB) as neid said what it means.
Sent from my HTC Glacier
neidlinger said:
AOSP = Android Open Source Project. It's as basic Android as one can get. Sense is nice. But i don't use Facebook or Twitter (anymore) so i have no need for the added bloat.
Click to expand...
Click to collapse
IG is nice, and I like it but my Market is not working, not syncing, can't download anything... i tried uninstalling all updates on the market, still no good, can't even go to the website and try to download it just does not work... any ideas?
Sorry, thanks for the AOSP info.
kpdadroid said:
IG is nice, and I like it but my Market is not working, not syncing, can't download anything... i tried uninstalling all updates on the market, still no good, can't even go to the website and try to download it just does not work... any ideas?
Click to expand...
Click to collapse
I'd read through the thread for it, or search for specific keywords. Or post the same question there. can you log in to your google account?
Another thing.. what happends to the mod that was downloaded on the sd card when we flash it? does it get moved to the phone's internal storage and away from the card..?
This market issue is killing me
yeah, my contacts are synced via google, just the apps don't get downloaded.
kpdadroid said:
yeah, my contacts are synced via google, just the apps don't get downloaded.
Click to expand...
Click to collapse
Try booting into recovery, formatting the cache, Dalvik Cache then fixing permission then reboot.
will do, thank you very much
kpdadroid said:
will do, thank you very much
Click to expand...
Click to collapse
I'm not promising that'll work but it's a good start.
Hello, i just bought myTouch 4g and i'm a noob, could someone explain me how to install the Android 2.3 from zero?? I want the Nexus s version. Please!!!
ringox said:
Hello, i just bought myTouch 4g and i'm a noob, could someone explain me how to install the Android 2.3 from zero?? I want the Nexus s version. Please!!!
Click to expand...
Click to collapse
1) root the device and turn s=off. Threads in the development section
2) visit the Cyanogen mod CM7 thread
[sent via Cyanogen powered Android]
Root your phone via one of the many available methods although the gfree has seemed to have some issues. I'd recommend visionary method. Once you have root and have S-off install Rom manager via the market and flash clockwork (and correct me if I'm wrong as I get confused a lot with recoveries build #'s lol) mod recovery version 2.5.1.2, 3.0.0.5 or 3.0.0.6. 3.0.0.6 is the best available currently. After flashing clockwork in Rom manager (its the first thing that pops up) scroll to download Rom and download cyanogen mod 7 rc4 from that menu. (You will have finished downloading the rom and have booted into recovery by now) MAKE A NANDROID BACKUP BEFORE PRECEDING. Then Wipe data and cache via recovery and then go to install zip via SD card then choose it again find the .zip file for cm7 and hit install. It WILL take awhile to install. After it finishes reboot. Again this will take awhile. Once it comes up, wait 3 minutes or so then reboot. Then set up and your good to go. Once you've done that its basically rinse repeat for other roms. But remember to read the roms flashing instructions before hand as it may have some wacky process for flashing. Good luck!
Sent from my HTC Glaciee using XDA Premium App
Not to nitpick, but 3.0.2.4 is the latest version. It just came out the other day, so that's probably why you're not aware.
EDIT: To the OP, like neidlinger said, your first step is to root. This is the guide I followed and it works great: http://forum.xda-developers.com/showthread.php?t=858021.
TeeJay3800 said:
Not to nitpick, but 3.0.2.4 is the latest version. It just came out the other day, so that's probably why you're not aware.
Click to expand...
Click to collapse
I was aware just wasn't aware of the stability thanks for the heads up though!
Sent from my HTC Glaciee using XDA Premium App
Nicgraner said:
I was aware just wasn't aware of the stability thanks for the heads up though!
Click to expand...
Click to collapse
I usually worry about the same thing with brand new releases. In this case, it seems to be good to go.
Thanks man if it looks good to you I'll probably flash it
Sent from my HTC Glaciee using XDA Premium App
Thank you to all of you guys!! I'll try to do it this afternoon.
So I just need to follow this instructions: http://forum.xda-developers.com/showthread.php?t=858021 and find a good custom rom to install, right?? which kind of room do you recomind me, as I said I want the Nexus S apariance.
ringox said:
So I just need to follow this instructions: http://forum.xda-developers.com/showthread.php?t=858021 and find a good custom rom to install, right?? which kind of room do you recomind me, as I said I want the Nexus S apariance.
Click to expand...
Click to collapse
Once you're finished with that tutorial, you'll be rooted and have a custom recovery installed. At that point, create a Nandroid backup, and then wipe all three items in the recovery menu and install the custom ROM. There is no direct Nexus S port to the MT4G, but CM7 and RoyalGinger are essentially the same thing, and in fact better, so check those out in the dev section.
I upgraded my vibrant to the lastest official rom, froyo UVKB5 , juse for those who still looking for the way to root it, I used the Super one click version 1.91 , and it works, remember ,only the version 1.91 will work, all other earlier version will not help you.
Certainly you will have to install the usb driver for Vibrant,
then download the SUPER ONE CLICK software ,
and select "USB DEBBUGING " on your phone,
then open the SUPER ONE CLICK programe,
connect your phone via usb,and click 'Root" ,
when it says done, reboot your phone, there you should get it rooted.
Lol and don't forget tto tell people how to get to clock work mod! Wait do you even know how to? Not trying to be mean bro.
Sent from my SGH-T959 using XDA App
Well, I really don't know, made this post as I almost can't find anything on internet about it.maybe u can tell me.
Been a while but look at the modified 3e recovery in the development section ...or you can odin back to jfd and root from there
Sent from my SGH-T959 using XDA App
lotusandstone said:
Well, I really don't know, made this post as I almost can't find anything on internet about it.maybe u can tell me.
Click to expand...
Click to collapse
You have to flash a new kernel. Then you can use ROM Manager to flash a new ROM.
I rockin Trigger atm. and I LOVE IT.
Thanks, guy, I'm ok with what I have right now, made this post as I thought it maybe can help someone like me,not very expert.
^ try some of my guides.
HG! said:
You have to flash a new kernel. Then you can use ROM Manager to flash a new ROM.
I rockin Trigger atm. and I LOVE IT.
Click to expand...
Click to collapse
Lol no that is not how you do it! You have to have a modified 3e recovery first then you can start flashing things its not as easy as that. Since the 3e recovery checks update.zip you cannot flash clockworkmod that easily you can do it on jfd that easy but not an update which has a 3e recovery!
Sent from my SGH-T959 using XDA App
well how do you flash CMD on 2.2.1 then?
Just wanted to give a quick thank you as this worked perfectly for me! The 2.2 version of super-one-click constantly had me hanging but I'm glad to have found this older version and it worked like a charm
Nope did not work: UVKB5: V1.9.1 "Failed" - V2.2 - Hangs.
wHERE are they right instructions step by step? dont want to make mistake
thanks
If all you are wanting to do is Root the phone, then look in the Q&A stickie for the Noob Guide. Has a flashable Rooter right there. If you can't find it, click the link in my signature.
I have never been able to get Superoneclick to work on any phone I have tried, for various reasons but still...
AIO Vibrant Toolbox
'nuff said.
Yes, it works!
lotusandstone said:
"I upgraded my vibrant to the lastest official rom, froyo UVKB5 , juse for those who still looking for the way to root it, I used the Super one click version 1.91 , and it works, remember ,only the version 1.91 will work, all other earlier version will not help you.
Certainly you will have to install the usb driver for Vibrant,
then download the SUPER ONE CLICK software ,
and select "USB DEBBUGING " on your phone,
then open the SUPER ONE CLICK programe,
connect your phone via usb,and click 'Root" ,
when it says done, reboot your phone, there you should get it rooted."
Click to expand...
Click to collapse
Thank you for this info.
I just spent a day trying to root my Galaxy S Vibrant using SuperOneClickv2.3.3 (after having it updated to Froyo 2.2). It did not work, no matter what I tried.
Finally, I came accross your post, googled for SuperOneClickv1.9.1, dowloaded and followed your instructions. It worked like a charm.
Once again, THANK YOU!
ive searched and no luck..anyways i recently had the official gingerbread update on my htc evo 4G. was rooted before update with unrevoked. upon doing research i found out that so far (i think) root has not been found with new gingerbread update. well my isssue is this ive been trying to go back to ver 3.70 with .exe RUU file on my pc. i cannot seem to make a connection witht the cell phone i keep getting error message [140] all the drivers have been installed correctly. is it not possible to go back a to an old 3.70 after gingerbread update?? sorry for being such a noob
malia420a said:
ive searched and no luck..anyways i recently had the official gingerbread update on my htc evo 4G. was rooted before update with unrevoked. upon doing research i found out that so far (i think) root has not been found with new gingerbread update. well my isssue is this ive been trying to go back to ver 3.70 with .exe RUU file on my pc. i cannot seem to make a connection witht the cell phone i keep getting error message [140] all the drivers have been installed correctly. is it not possible to go back a to an old 3.70 after gingerbread update?? sorry for being such a noob
Click to expand...
Click to collapse
Unfortunately no there is no way to revert back. No new root has been found for update yet but it will in the next month or two. Sorry
thank you for the quick reply bro
malia420a said:
thank you for the quick reply bro
Click to expand...
Click to collapse
No prob...only wish I had better news for ya
Papa Smurf151 said:
No prob...only wish I had better news for ya
Click to expand...
Click to collapse
any updates man i want to root my evo already lol
malia420a said:
ive searched and no luck..anyways i recently had the official gingerbread update on my htc evo 4G. was rooted before update with unrevoked. upon doing research i found out that so far (i think) root has not been found with new gingerbread update. well my isssue is this ive been trying to go back to ver 3.70 with .exe RUU file on my pc. i cannot seem to make a connection witht the cell phone i keep getting error message [140] all the drivers have been installed correctly. is it not possible to go back a to an old 3.70 after gingerbread update?? sorry for being such a noob
Click to expand...
Click to collapse
Yeah, you won't be able to go back . However, for your general connection issue, I experienced the same thing, downloading HTC Sync worked for me.
I don't know if I'm missing something, but are you still s-off? Do you have a custom recovery like Clockwork or Amon-Ra?
Sent from my PC36100 using XDA App
If you do, you should be able to flash any ROM you want, possibly even downgrade the hboot (which I believe is what's keeping you from using the RUU, not that it matters if you can flash ROMs).
Sent from my PC36100 using XDA App
soldierforchrist2 said:
I don't know if I'm missing something, but are you still s-off? Do you have a custom recovery like Clockwork or Amon-Ra?
my htc evo is currently s-on its completely stock
Click to expand...
Click to collapse
Moving to a JellyBean rom, some users have experienced the unability to have the auto rotation functional.
There was a debate about that a long time ago whether it was a kernel , a rom or a hardware issue ....
(N.B: Custom roms with Sense 4 are ONE of the causes leading to this problem !)
However , even if there is still not a real fix available, everyone who is experiencing the issue can make the auto rotation functional again by following this process :
1) Download the DHD RUU that can be found on this thread : http://forum.xda-developers.com/showthread.php?t=1382235 (Already rooted)
2) Once downloaded, extract the files to recreate the full zip, put it in your SD Card . ( Download here 7-Zip for extraction )
3) Now go to the RECOVERY, do a FULL WIPE and then flash that Stock rom.
4) Reboot
5) Make the basic settings
6) Rebot again into RECOVERY, do a FULL WIPE and then flash your JellyBean rom.
For some users, flashing a PRE-ROOTED ROM does not fix the auto rotation problem. If you are one of those, just stick to the original RUU. To proceed, follow these steps :
1) In order to flash the original RUU from a JB rom, you have to go back first to a GB rom due to some Firmwares incompatibiltiy during installation. The fix is tested with latest CM 7 which you can download from here : http://download.cyanogenmod.org/?type=stable&device=ace
2) Then, and after you have flashed the CM 7 rom, download this RUU:http://hotfile.com/dl/145200528/06c..._26.14.04.28_M_release_225512_signed.exe.html
3) Once downloaded, open the executable file and follow the instructions to flash your DHD to the original STOCK ROM.
4) Root your Rom using this easy tool: http://downloadcdn.betterinstaller.com/installers/9/9/UnlockRoot_downloader_by_UnlockRoot.exe
5) When finished:
A- Download ROM MANAGER from the PLAYSTORE to flash the CLOCKWORKMOD RECOVERY,or use 4EXT RECOVERY UPDATER to flash the latest 4EXT RECOVERY downloadable from here: http://forum.xda-developers.com/attachment.php?attachmentid=1476011&stc=1&d=1352726394
B- Otherwise If your Bootloader is ENG-OFF & you want a quick method, you can use the Bootloader to flash this file Zip ( 4EXT RECOVERY RC8 ): http://forum.xda-developers.com/attachment.php?attachmentid=1485776&d=1353050856
6) Reboot into Recovery
7) Full Wipe
8) Flash the JellyBean rom you want to use
9) Now you have a functional auto rotation !!!!
WEIRD as a FIX but the important is that it WORKS
If you get stuck at any level, do not hesitate to ask for help !
Thanks and Credits:
-pnoire
-nitr00
-bananagranola
-marsdta
-Teichopsia
-peiminglei
-gurby1
-hdorius
Thank a lot for the links and the guide to solve this annoying issue.
Do you agree if i translate the steps and publish the tuto in a french forum? Of course with credit given to you.
YES！
But what I want to talk about is you needn;t to root it since your hboot is s-off, you can flash recovery directly from hboot or bootloader just like you update the radio img with the zip named PD98IMG.
yes mate good job!
pnoire said:
Thank a lot for the links and the guide to solve this annoying issue.
Do you agree if i translate the steps and publish the tuto in a french forum? Of course with credit given to you.
Click to expand...
Click to collapse
Yes of course mate
peiminglei said:
YES！
But what I want to talk about is you needn;t to root it since your hboot is s-off, you can flash recovery directly from hboot or bootloader just like you update the radio img with the zip named PD98IMG.
yes mate good job!
Click to expand...
Click to collapse
Rom Manager will ask you to root your phone if you want to flash it ... even if you are S-off
EDIT: sorry I misunderstood you.. I should go take my breakfast first and come back
Well , I did not use this way , but if it works then that's okay
I believe that using a rooted RUU works too. For example, Super Stock in the Inspire 4G forums.
THIS IS A BAD IDEA. People should not be flashing a froyo ruu. Those that have shipped with gb will have there boot loaders messed up. Then they'll be bugging glevitan on how to fix it as he is way nicer than me.
If your going to flash stock to fix this auto rotate stick gb 2.50/3.12
Then flash cwr/4ext in a pd98 or fastboot
bananagranola said:
I believe that using a rooted RUU works too. For example, Super Stock in the Inspire 4G forums.
Click to expand...
Click to collapse
I did not test it , but I've heard that it worked for some DHD users
However, I'm just trying to avoid all things that are not official... By this way, we avoid also unexcpected or uncommon results !
marsdta said:
THIS IS A BAD IDEA. People should not be flashing a froyo ruu. Those that have shipped with gb will have there boot loaders messed up. Then they'll be bugging glevitan on how to fix it as he is way nicer than me.
If your going to flash stock to fix this auto rotate stick gb 2.50/3.12
Then flash cwr/4ext in a pd98 or fastboot
Click to expand...
Click to collapse
Did you have this issue? did you try to fix it with what you have just said ? If yes that would be good and I can update the OP . But if not .. sorry ... I cannot post something which was not tested by everyone ...
I never had the issue because in flashed the 3.20 before any jb roms existed.
I'm not talking about fixing the auto rotate issue as being a problem but flashing a froyo ruu/pd98. Like I said if your device shipped with gb then the downgrade in boot loader will cause it to go in super slow. It will take like 20 minutes to boot up. Glevitan and I have seen this one to many times.
For those that had froyo shipped devices its no big deal, bit for those that were not it is a problem. That why glevitan has a section in his guide to fix this
We have reports of someone fixing it with http://forum.xda-developers.com/showthread.php?t=1382235 in the cfX forums. Post 2015. Also, WordsworthESP reported that Super Stock worked.
Rikodu said:
Did you have this issue? did you try to fix it with what you have just said ? If yes that would be good and I can update the OP . But if not .. sorry ... I cannot post something which was not tested by everyone ...
Click to expand...
Click to collapse
he knows what he's talking about.
on a side note, there have been reports that http://forum.xda-developers.com/showthread.php?p=29836619 this rom worked. I personally flashed the official ruu for the inspire.
Then I flashed a pd98img file in hboot to get recovery. This one is 4ext touch recovery. http://forum.xda-developers.com/showthread.php?p=33421701
If you prefer cwm touch recovery you can get it from the ace think tank thread from glevitans guide in post#7.
P.S. If you ever read marsdta, glevitan (and other members that are too many to mention) saying something, your next response should be "yes sir"
Sent from a dream.
marsdta said:
I never had the issue because in flashed the 3.20 before any jb roms existed.
I'm not talking about fixing the auto rotate issue as being a problem but flashing a froyo ruu/pd98. Like I said if your device shipped with gb then the downgrade in boot loader will cause it to go in super slow. It will take like 20 minutes to boot up. Glevitan and I have seen this one to many times.
For those that had froyo shipped devices its no big deal, bit for those that were not it is a problem. That why glevitan has a section in his guide to fix this
Click to expand...
Click to collapse
Could you provide a link with the Ruu that goes for GB shipped devices ? I'll include you in the credit list
bananagranola said:
We have reports of someone fixing it with http://forum.xda-developers.com/showthread.php?t=1382235 in the cfX forums. Post 2015. Also, WordsworthESP reported that Super Stock worked.
Click to expand...
Click to collapse
Great , thanks for your help
Rikodu said:
Great , thanks for your help
Click to expand...
Click to collapse
heres my link too the 3.12 ruu for those that want to use it plus they can also be found on goo.im incase my upload gets killed
http://min.us/mIc6tkSGg
http://goo.im/stock/ace/ruu
marsdta said:
heres my link too the 3.12 ruu for those that want to use it plus they can also be found on goo.im incase my upload gets killed
http://min.us/mIc6tkSGg
http://goo.im/stock/ace/ruu
Click to expand...
Click to collapse
OP updated , thanks a lot
bananagranola said:
We have reports of someone fixing it with http://forum.xda-developers.com/showthread.php?t=1382235 in the cfX forums. Post 2015. Also, WordsworthESP reported that Super Stock worked.
Click to expand...
Click to collapse
Yes, this worked perfectly for me too. Flashed the
DHD_WWE_3.12.405.1_STOCK_rooted_by_nitr00_LITE.zip from recovery, and then wiped and flashed Jelly Bean. The problem with auto rotation for me only appears after flashing the ViperDHD ROM (Don't recall problems after the other sense 4.1).
Sent from my Desire HD using Tapatalk 2
trackattaker said:
Yes, this worked perfectly for me too. Flashed the
DHD_WWE_3.12.405.1_STOCK_rooted_by_nitr00_LITE.zip from recovery, and then wiped and flashed Jelly Bean. The problem with auto rotation for me only appears after flashing the ViperDHD ROM (Don't recall problems after the other sense 4.1).
Sent from my Desire HD using Tapatalk 2
Click to expand...
Click to collapse
+1
Sent from my Desire HD using xda premium
Update 2 => OP
Yeah! it's Work! :good: