Database Users

[SOLVED] Need Fastboot KDZ for

Hi guys,
I need ClockworkMod recovery working to use with ROM Manager. To my understanding, to do this, I need to flash with a ROM having fastboot. I tried Open Europe with fastboot but it keeps giving forceclosures. I can't even enter settings and so I can't enable USB debugging to root or to flash another ROM via KDZ updater.
My phone runs stock 2.1 latest version made for TMN mobile. Does anyone have the KDZ with fastboot for above version? Can anyone help me make one?
Thanks in advance,
Regards,
Nibras.

The Open Europe fastboot works fine. Just do a factory reset.

or use this rom
V10D_00.kdz
http://www.4shared.com/file/-jnfaB1R/V10D_00.html
it works first time everytime i used it

Dr. Alani:
That would require entering the setting menu?

eoghan2t7 said:
or use this rom
V10D_00.kdz
http://www.4shared.com/file/-jnfaB1R/V10D_00.html
it works first time everytime i used it
Click to expand...
Click to collapse
I would like to have the current ROM as well. To backup it, I will need a version of this ROM with fastboot.

Ok, done. Installed OpenEU and did a hard reset and it works fine.
I flashed clockworkmod 2.5.0.5 but i can't seem to be able to install swiftdroid using .zip from the recovery.

You will need to flash the new recovery 3.x.
Sent from my GT540 using XDA App

Did that but it didn't work. Ended up using fastboot in the end.
Thanks you guys for the assistance.
Problem solved.

nibras_reeza said:
Did that but it didn't work. Ended up using fastboot in the end.
Thanks you guys for the assistance.
Problem solved.
Click to expand...
Click to collapse
flash this version:
Recovery_clockwork_2.5.1.8 works for flash earlier ROMS
http://www.mediafire.com/?sax544hf3cye3gx
* it is recommended to use recovery mode , less chance to brick your phone
enjoy!

Thanks. However I switched back to stock. CM7 was pretty fast but I don't find a lot of reasons to run CM7. And, my SD doesn't work with CM7 due to the ext2. So, that's a lot of pain for me.

nibras_reeza said:
Thanks. However I switched back to stock. CM7 was pretty fast but I don't find a lot of reasons to run CM7. And, my SD doesn't work with CM7 due to the ext2. So, that's a lot of pain for me.
Click to expand...
Click to collapse
im wentback to 2.1 too but a custom one.
check this out:
http://translate.google.com/translate?hl=en&sl=auto&tl=en&u=http%3A%2F%2F4pda.ru%2Fforum%2Findex.php%3Fshowtopic%3D217235
i actualy have the The fifth version of the firmware: Advance Lite Edition

if you decide to try it pm me, i have mirrors.

lavero.burgos said:
if you decide to try it pm me, i have mirrors.
Click to expand...
Click to collapse
lavero try joes gingerbread rom i think you will like it lol
Sent from my GT540 using XDA Premium App

Hmm. I was glad to see Joe's version too. It's exactly what I wanted. However it appears to have trouble with video recording and AF. I will wait till that is fixed.
I wonder if the MCR(MoDaCo Custom ROM) or something similar is available for GT540.

Yeah i'll wait till joe's rom get the fixes. Im good with my actual 2.1 no need for more everything works. I just would like widget locker running but keeps fc'ing
Sent from my GT540 using XDA App

Just a quick note.
Seems there's a fastboot kdz for this particular ROM.
http://translate.google.com/transla...=tmn+with+fastboot&hl=en&safe=off&prmd=ivnsfd
Here's the link to the download mentioned in above forum post.
http://www.mediafire.com/?g43710prho81n81
I really like the TMN ROM over the OpenEU version although am neither Portugese or European. The TMN ROM is more newer than OpenEU version and it also is noticeably faster. So, if I can have both TMN ROM with fastbook/clockwork, it's a huge plus for me since I wouldn't really stand back to try out new ROMs.

ALL What you need is here: www.MyGT540.tk
HF

How to root t-mobile vibrant with Froyo 2.21,froyo UVKB5 ,

I upgraded my vibrant to the lastest official rom, froyo UVKB5 , juse for those who still looking for the way to root it, I used the Super one click version 1.91 , and it works, remember ,only the version 1.91 will work, all other earlier version will not help you.
Certainly you will have to install the usb driver for Vibrant,
then download the SUPER ONE CLICK software ,
and select "USB DEBBUGING " on your phone,
then open the SUPER ONE CLICK programe,
connect your phone via usb,and click 'Root" ,
when it says done, reboot your phone, there you should get it rooted.

Lol and don't forget tto tell people how to get to clock work mod! Wait do you even know how to? Not trying to be mean bro.
Sent from my SGH-T959 using XDA App

Well, I really don't know, made this post as I almost can't find anything on internet about it.maybe u can tell me.

Been a while but look at the modified 3e recovery in the development section ...or you can odin back to jfd and root from there
Sent from my SGH-T959 using XDA App

lotusandstone said:
Well, I really don't know, made this post as I almost can't find anything on internet about it.maybe u can tell me.
Click to expand...
Click to collapse
You have to flash a new kernel. Then you can use ROM Manager to flash a new ROM.
I rockin Trigger atm. and I LOVE IT.

Thanks, guy, I'm ok with what I have right now, made this post as I thought it maybe can help someone like me,not very expert.

^ try some of my guides.

HG! said:
You have to flash a new kernel. Then you can use ROM Manager to flash a new ROM.
I rockin Trigger atm. and I LOVE IT.
Click to expand...
Click to collapse
Lol no that is not how you do it! You have to have a modified 3e recovery first then you can start flashing things its not as easy as that. Since the 3e recovery checks update.zip you cannot flash clockworkmod that easily you can do it on jfd that easy but not an update which has a 3e recovery!
Sent from my SGH-T959 using XDA App

well how do you flash CMD on 2.2.1 then?

Just wanted to give a quick thank you as this worked perfectly for me! The 2.2 version of super-one-click constantly had me hanging but I'm glad to have found this older version and it worked like a charm

Nope did not work: UVKB5: V1.9.1 "Failed" - V2.2 - Hangs.

wHERE are they right instructions step by step? dont want to make mistake
thanks

If all you are wanting to do is Root the phone, then look in the Q&A stickie for the Noob Guide. Has a flashable Rooter right there. If you can't find it, click the link in my signature.
I have never been able to get Superoneclick to work on any phone I have tried, for various reasons but still...

AIO Vibrant Toolbox
'nuff said.

Yes, it works!
lotusandstone said:
"I upgraded my vibrant to the lastest official rom, froyo UVKB5 , juse for those who still looking for the way to root it, I used the Super one click version 1.91 , and it works, remember ,only the version 1.91 will work, all other earlier version will not help you.
Certainly you will have to install the usb driver for Vibrant,
then download the SUPER ONE CLICK software ,
and select "USB DEBBUGING " on your phone,
then open the SUPER ONE CLICK programe,
connect your phone via usb,and click 'Root" ,
when it says done, reboot your phone, there you should get it rooted."
Click to expand...
Click to collapse
Thank you for this info.
I just spent a day trying to root my Galaxy S Vibrant using SuperOneClickv2.3.3 (after having it updated to Froyo 2.2). It did not work, no matter what I tried.
Finally, I came accross your post, googled for SuperOneClickv1.9.1, dowloaded and followed your instructions. It worked like a charm.
Once again, THANK YOU!

G2 Gingerbread ROM leaked?

Phandroid is reporting the official G2 gingerbread ROM has been leaked, anyone been brave enough to try it out?
link removed because i'm a new user and it won't let me post it

Um it's in the development thread. Did you look?
Sent from my HTC Vision using XDA Premium App

Been out yesterday posted by football and yes it gave my soft brick a revival!!

david279 said:
Um it's in the development thread. Did you look?
Sent from my HTC Vision using XDA Premium App
Click to expand...
Click to collapse
Just saw that thread ( http://forum.xda-developers.com/showthread.php?t=1074852 ). I wasn't quite sure why a final T-mo rom would be in the development forum, seems a little counter intuitive? I guess the dev forum really means the rom forum. anyway, thanks guys.

izzelsizzel said:
Just saw that thread ( http://forum.xda-developers.com/showthread.php?t=1074852 ). I wasn't quite sure why a final T-mo rom would be in the development forum, seems a little counter intuitive? I guess the dev forum really means the rom forum. anyway, thanks guys.
Click to expand...
Click to collapse
step back and think about it.....
wouldnt you want a rom dev to get their hands on it to work their magic?

izzelsizzel said:
guess the dev forum really means the rom forum. anyway, thanks guys.
Click to expand...
Click to collapse
Its got a lot more than just ROMs, but also kernels, radios, guides, and other tools. Some stuff are custom or modded, some are stock tools that developers and others will find useful.

Please help -- how to flash this new stock gingerbread rom to a rooted g2
I have a rooted G2 running CM7, but the gps is totally dead. I'm too much of a noob to flash a new radio, which I think would do the trick. Flashing this stock gingerbread rom seems like the perfect solution because it includes an updated radio and i am just sure it will fix the gps problem.
I bought the phone rooted and I know how to flash new rooted roms through clockwork (so easy), but I have absolutely no idea how to flash a rom like this that updates everything.
I'm sure this question has been asked here before, but can someone just point me to a step-by-step instructions about how to flash this particular stock gingerbread rom to a g2 that is rooted and has clockwork installed?
Thanks~! This is my first post.

sship said:
I have a rooted G2 running CM7, but the gps is totally dead. I'm too much of a noob to flash a new radio, which I think would do the trick. Flashing this stock gingerbread rom seems like the perfect solution because it includes an updated radio and i am just sure it will fix the gps problem.
I bought the phone rooted and I know how to flash new rooted roms through clockwork (so easy), but I have absolutely no idea how to flash a rom like this that updates everything.
I'm sure this question has been asked here before, but can someone just point me to a step-by-step instructions about how to flash this particular stock gingerbread rom to a g2 that is rooted and has clockwork installed?
Thanks~! This is my first post.
Click to expand...
Click to collapse
Flashing a radio is easy. Just follow the steps in the radio thread:
http://forum.xda-developers.com/showthread.php?t=970809
I know the second method (fastboot and radio.img files) is supposed to be safer. But that looks like it might be over your head, and you need the Eng Hboot to do it.
Flashing a ROM is easy, too. Just move the file to your SD card, and flash from ROM Manager. You will see an option "Install ROM from SD Card". Browse to the file, and the rest is the same as if you downloaded the ROM using ROM Manager.

Thanks, but a few more questions . . .
redpoint73 said:
Flashing a ROM is easy, too. Just move the file to your SD card, and flash from ROM Manager. You will see an option "Install ROM from SD Card". Browse to the file, and the rest is the same as if you downloaded the ROM using ROM Manager.
Click to expand...
Click to collapse
Thanks for the reply! I think you are underestimating how new I am to this, though. My question is really this: does it matter, when flashing the new gingerbread rom for g2 that just came out, that the rom is not just a rom, but also a radio and everything else? it is titled in the "PC10IMG" form, which seems to me, from reading other threads, to be a special thing.
[full title: PC10IMG_Vision_Gingerbread_S_TMOUS_2.13.531.8_Radio_12.52.60.25_26.08.04.30_M3_release_188635_signed]
also, would you recommend that i wipe stuff before flashing? when the person who flashed my phone with me last time did it, he wiped dalvik cache and two others (can't remember which, or where he found them in recovery), and user data as well. but if you go to do it within clockwork, it doesn't ask you to do that, does it? again, i'm sure there is a thread about this somewhere.
sorry sorry to be so new to this! and thanks a ton for the help.

sship said:
Thanks for the reply! I think you are underestimating how new I am to this, though. My question is really this: does it matter, when flashing the new gingerbread rom for g2 that just came out, that the rom is not just a rom, but also a radio and everything else? it is titled in the "PC10IMG" form, which seems to me, from reading other threads, to be a special thing.
[full title: PC10IMG_Vision_Gingerbread_S_TMOUS_2.13.531.8_Radio_12.52.60.25_26.08.04.30_M3_release_188635_signed]
also, would you recommend that i wipe stuff before flashing? when the person who flashed my phone with me last time did it, he wiped dalvik cache and two others (can't remember which, or where he found them in recovery), and user data as well. but if you go to do it within clockwork, it doesn't ask you to do that, does it? again, i'm sure there is a thread about this somewhere.
sorry sorry to be so new to this! and thanks a ton for the help.
Click to expand...
Click to collapse
well, it's a bit complicate.
supposedly the rom will return your phone to a totally stock state, which will give you the new radio etc, but you will not have root - this was already confirmed. One other forum member mentioned that he flashed the rom and did not loose S-OFF, which is a controversy...
update: lol, dude having CM on your phone means you already have clockwork installed. you just need the /system part of the leak and it's available here: http://forum.xda-developers.com/showthread.php?t=1074852

Really all he needs to do is run vision efs wipe. This been gone over a million times. CM + gps broke = needing efs wipe. No need to get into radios and all that just yet.
Sent from my HTC Vision using XDA Premium App

you can solve your gps issues by following two basics:
1. match libs in /system/libs with your radio version,
2. wipe two partitions like it is explained here: http://forum.xda-developers.com/showthread.php?t=1028405
You don't need the new rom, though - it still has the 2 muted seconds when receiving an incoming call - for me that is the no go.

sship said:
Thanks for the reply! I think you are underestimating how new I am to this, though. My question is really this: does it matter, when flashing the new gingerbread rom for g2 that just came out, that the rom is not just a rom, but also a radio and everything else? it is titled in the "PC10IMG" form, which seems to me, from reading other threads, to be a special thing.
[full title: PC10IMG_Vision_Gingerbread_S_TMOUS_2.13.531.8_Radio_12.52.60.25_26.08.04.30_M3_release_188635_signed]
also, would you recommend that i wipe stuff before flashing? when the person who flashed my phone with me last time did it, he wiped dalvik cache and two others (can't remember which, or where he found them in recovery), and user data as well. but if you go to do it within clockwork, it doesn't ask you to do that, does it? again, i'm sure there is a thread about this somewhere.
sorry sorry to be so new to this! and thanks a ton for the help.
Click to expand...
Click to collapse
I thought you were talking about the version of the leak that is mentioned in the last post (#10) and also mentioned above in post #4, which is pre-rooted. Thats the one you want. Flash from ROM Manager.
If you are talking about flashing this one:
http://forum.xda-developers.com/showthread.php?t=1074391
This is the official ROM, and as stated in the previous post, you will lose root. So you probably want to avoid this.
PC10IMG.ZIP files are flashable from Hboot (CWM not required). But since you have Clockwork, I believe you can flash any ROM or patch, as long as its a ZIP file. Its safer to flash from CWM anyway, so avoid Hboot for flashing ROMs.
Not positive, but I think you can keep your data since you are going between similar ROMs (Gingerbread, non-Sense). Wiping dalvik and cache are advisable. Not doing so when switching ROMs can lead to random bugs, and there is no real reason to not wipe them. You can wipe dalvik and cache in recovery. If you want to wipe data, you can also do that in recovery, under "advanced". But you will lose all your user data.
If you flash from ROM Manager, it will ask if you want to wipe. But I've never been clear on what all exactly is wiped (dalvik, cache, data). It might be all 3 of those.
Sorry, I've just stated a bunch of things I'm not completely sure about. So hopefully somebody else can confirm these.
The good news is, do a backup of your current ROM in ROM Manager before you flash anything, and if you screw up anything, you can just go into recovery and load your backup.

please help -- do not want to brick
petarpLab said:
well, it's a bit complicate.
supposedly the rom will return your phone to a totally stock state, which will give you the new radio etc, but you will not have root - this was already confirmed. One other forum member mentioned that he flashed the rom and did not loose S-OFF, which is a controversy...
Click to expand...
Click to collapse
I actually would prefer this to flashing a version of this rom that someone else has extracted/altered, however little. My fear is two things:
1 -- Will it brick my phone to flash a PCIMG file? (see here: http://forum.xda-developers.com/showthread.php?t=838484)
2 -- what do I have to do differently to flash a PCIMG file other than what I normally would do in clockwork to flash another rom (for example a CM rom)
THANKS!

xsteven77x said:
Really all he needs to do is run vision efs wipe. This been gone over a million times. CM + gps broke = needing efs wipe. No need to get into radios and all that just yet.
Click to expand...
Click to collapse
I have tried that, to no avail. I see others who have tried that and failed, and things seem to get tricky after that. I agree, I would rather avoid the nitty gritty stuff.

So I am devastated to see that there is no lock animation =(. That was something I was really looking forward to, despite the insignificance.
Sent from my T-Mobile G2 using XDA App

sship said:
I actually would prefer this to flashing a version of this rom that someone else has extracted/altered, however little. My fear is two things:
1 -- Will it brick my phone to flash a PCIMG file? (see here: http://forum.xda-developers.com/showthread.php?t=838484)
2 -- what do I have to do differently to flash a PCIMG file other than what I normally would do in clockwork to flash another rom (for example a CM rom)
THANKS!
Click to expand...
Click to collapse
My opinion, you're better off flashing the rooted ROM. If you flash the official PC10IMG.ZIP, you will lose root, and not be able to get it back without downgrading (negating the purpose of flashing the official ROM in the first place).
Are you worried about malicious, or accidentally harmful modifications to the ROM (in the rooted version of the leak)? I don't worry much about ROMs for reputable developers. But admittedly, I don't know anything about that user that posted the rooted version of the leak.
In response to your questions:
1) As the thread you posted indicates, its safer not to flash those files unless you know exactly what you are doing.
2) I think you can flash from Clockwork. But as I said, if you aren't sure what you are doing, its not a good idea. You will lose root, and I think some people have also gotten S-On by flashing the official ROMs also. I which case, you may be pretty screwed (as far as getting root), since you can't flash other ROMs with S-On.

Alright so I've reading through all sorts of different forums and feel lost and exactly what to do. I downloaded the official 2.3 update ROM for the G2 that Football had released off of a mirrored site from my phone's browser then renamed it PC10IMG and moved to the root of the SD card. I then did the whole volume down + power button to load the zip but for some reason it says:
VISION PVT SHIP S-ON
HBOOT-0.82.0000
MICROP-0425
RADIO-26.03.02.26_M
eMMC-boot
Sep 2 2010,17:59:38
SD checking...
Loading...[PC10DIAG.zip]
No image!
Loading...[PC10DIAG.nbh]
No image or wrong image!
Loading...[PC10IMG.zip]
No image!
Loading...[PC10IMG.nbh]
No image or wrong image!
I have no idea what to do or anything so help would be much appreciated. Now I would post this in that forum but because I just recently joined this site it will not allow me to do so. So, yea. Thanks.

Mr. Shaggy said:
Alright so I've reading through all sorts of different forums and feel lost and exactly what to do. I downloaded the official 2.3 update ROM for the G2 that Football had released off of a mirrored site from my phone's browser then renamed it PC10IMG and moved to the root of the SD card. I then did the whole volume down + power button to load the zip but for some reason it says:
VISION PVT SHIP S-ON
HBOOT-0.82.0000
MICROP-0425
RADIO-26.03.02.26_M
eMMC-boot
Sep 2 2010,17:59:38
SD checking...
Loading...[PC10DIAG.zip]
No image!
Loading...[PC10DIAG.nbh]
No image or wrong image!
Loading...[PC10IMG.zip]
No image!
Loading...[PC10IMG.nbh]
No image or wrong image!
I have no idea what to do or anything so help would be much appreciated. Now I would post this in that forum but because I just recently joined this site it will not allow me to do so. So, yea. Thanks.
Click to expand...
Click to collapse
Make sure it is named PC10IMG.zip and not PC10IMG.zip.zip
Sent from my LG-P990 using XDA Premium App

So I checked it out and it's named PC10IMG.zip so I don't know what could be wrong. I find it weird that I'm the only one having this problem.

[Q] [LEAK/DEV][ICS 4.0.3] Acer_AV041_A500_0.009.00_WW_GEN1 Q&A

I don't have enough posts to add to the thread in the Dev forums, so I will ask here.
My Iconia A500 is not rooted, I don't feel that I needed it to be rooted most of the time. Now that is out of the way, I have questions.
Is there a version of this Dev leak that I can flash if I don't care about rooting or recovery? I believe the version he leaked is a CWM or RA recovery flashable only, so I would need the original untouched release.
If I do flash this, I should be able to flash future versions correct, or possibly the final version of the ICS release?
Essentially I would like to use this release on my tablet without caring about root or recovery, but I also don't want to screw myself for future releases.
Is it possible to reflash back to an old Honeycomb release?

You might not be able to post in the dev thread, but you can read it. All your answers are in there, most are even in the OP!

Jilaman said:
I don't have enough posts to add to the thread in the Dev forums, so I will ask here.
My Iconia A500 is not rooted, I don't feel that I needed it to be rooted most of the time. Now that is out of the way, I have questions.
Is there a version of this Dev leak that I can flash if I don't care about rooting or recovery? I believe the version he leaked is a CWM or RA recovery flashable only, so I would need the original untouched release.
If I do flash this, I should be able to flash future versions correct, or possibly the final version of the ICS release?
Essentially I would like to use this release on my tablet without caring about root or recovery, but I also don't want to screw myself for future releases.
Is it possible to reflash back to an old Honeycomb release?
Click to expand...
Click to collapse
If you don't care about root or recovery, than it is best you stay stock, and wait for OTA updates. This will keep you relatively safe.

Take a deep Breath this could turn out to have issues and not be complete.. There is only reports that it is flash-able.This does not guarantee that is will Run properly.As its a Acer development rom leaked to the public..
I will try it after there are 2 or 3 more days of comments.If it seems to be working well.I must have Root. Hope the post above mine has helped.
JUST Think if it does not pan out you can be one that said IM SMART I WAITED..
GOOD LUCK . DONT CROSS THE STREET WITHOUT LOOKING BOTH WAYS.

This rom is very easy to be flashed on the a500, dear erica_renee. I've done it tonight and I did come, like you, from the latest version of the unrooted Acer stock ROM.
In order to do this, you must:
- flash from your PC, a rooted rom version 3.2 on your tablet with the little app "DotNetDetecter". You can download it from somewhere on XDA Iconia A500's developers threads but I don't remember in which thread I found it.
- install the app "Acer Recovery" (free on the market)
- download the zip of RA recovery (You'll find the link in the Vache's thread) and install this recovery from your CMW recovery you've installed with the rooted rom 3.2 in the first step
- download and install from the RA recovery the ROM ICS that you can download on the website of Vache... Choose the "RA recovery" version of this ROM.
Very pleasant version, this ICS ROM ... but the low volume defect when I record sounds is still present...
Again and again I'm more and more convinced that this problem comes from the LOW QUALITY of these microphones !!!

castafiore said:
This rom is very easy to be flashed on the a500, dear erica_renee. I've done it tonight and I did come, like you, from the latest version of the unrooted Acer ROM.
In order to do this, you must:
- flash a rooted rom 3.2 on your tablet with the little app "DotNetDetecter". You can download it from somewhere on XDA Iconia A500's developers threads but I don't remember in which thread I found it.
- install the app "Acer Recovery" (free on the market)
- download the zip of RA recovery (You'll find the link in the Vache's thread) and install this recovery from your CMW recovery you've installed with the rooted rom in the previous step
- download and install from the RA recovery the ROM ICS that you can download on the website of Vache... Choose the "RA recovery" version of this ROM.
Very pleasant version, this ICS ROM ... but the low volume defect when I record sounds is still present...
Again and again I'm more and more convinced that this problem comes from the LOW QUALITY of these microphones !!!
Click to expand...
Click to collapse
are you saying that you flashed the cwm version of this on a a500.or do you have a501 Or are you using the non rooted full rom version.. And yes the mic issue i agree with . Considering going to Black box and buying upgraded mics and install . but i dont use it that much.

I have an Iconia A500, renee and I flashed the leaked Acer ICS stock ROM that Vache proposes on his website.
The link is on the first page of his thread.

castafiore said:
I have an Iconia A500, renee and I flashed the leaked Acer ICS stock ROM that Vache proposes on his website.
The link is on the first page of his thread.
Click to expand...
Click to collapse
ok .
now can you go to the root for a200 thread and follow that procedure and see if it will ROOT For you..
this could be the solution if so..
Thanks in advance...

I'd try it myself, but I don't want to lose my current bootloader and the ability to flash custom roms, so I'll just wait.

I'm just waiting for someone to confirm they can return to 3.2.1 via apx mode, once confirmed ill flash it
Sent from my Desire HD using xda premium

M..N said:
I'm just waiting for someone to confirm they can return to 3.2.1 via apx mode, once confirmed ill flash it
Sent from my Desire HD using xda premium
Click to expand...
Click to collapse
I to. have the instructions downloaded and waiting.. Better things come to those Who Wait..
Impatience is often followed by hardship Turmoil.
Wow that was good even for blonde chic..

Why do you fear not being able to go back to honeycomb ?
ICS a real improvement, for me. Google chrome is a great browser too.
These are my first impressions anyway. Very good, very pleasant.
But, if you're not in a hurry, you can wait one more month, of course.

castafiore said:
Why do you fear not being able to go back to honeycomb ?
ICS a real improvement, for me. Google chrome is a great browser too.
These are my first impressions anyway. Very good, very pleasant.
But, if you're not in a hurry, you can wait one more month, of course.
Click to expand...
Click to collapse
Just in case anything happens it would be good to know if we can revert. When you flashed did you lose all your data, and anything not working in the rom?
Sent from my Desire HD using xda premium

M..N said:
Just in case anything happens it would be good to know if we can revert. When you flashed did you lose all your data, and anything not working in the rom?
Sent from my Desire HD using xda premium
Click to expand...
Click to collapse
I MUST have root access. that is all..
may i ask if you have checked the fallow..
GPS.
Can you tether to a android ad-hoc network
does Ti Backup work.
Does email exchange work.
I could go on but i will not .. THANKS IN Advance

No root on ICS (yet?).
I guess that you will loose it as well when you will install this Rom as an update by OTA...
I don't really need a root on my tablet, personaly, except when I want to test a custom Rom.
There is maybe a solution to keep the root anyway. Check in the thread of Vache.
Apart from that, everything works better than ever for me (gps, tether through my htc Desire, caméra, etc ... except the recurrent prob with the microphones ).
I don't use Titanium backup (that needs root, isn't it?) but MyBackup pro.
Email exchange? Do you mean the app working with Outlook on Windows? I don't use it neither. I use gmail and I import my other accounts on gmail. Sorry. But my email accounts (pop) work perfectly well.
Everything works very well actually with this Rom. I didn't notice any problem till now. No way to go back to HC...

I wonder if Thor has this yet. He is probably the best a500 ICS dev right now.
Sent from my 3D using InfectedRom Eternity.

M..N said:
I'm just waiting for someone to confirm they can return to 3.2.1 via apx mode, once confirmed ill flash it
Sent from my Desire HD using xda premium
Click to expand...
Click to collapse
Just to let you know. I have flashed with the full 4.0.3 (not CWM/rooted one), and then used the first method here to restore back to 3.0.1, then installed CWM to install a ROM without any problems. I have since updated to 4.0.3 full again as it's by far the best ROM for me.

Ny the way, I noticed this morning that the ability to disable bloatware has been added to the stock ics rom via app section of settings, so one less reason for me to need root.
Sent from my SCH-I500 using XDA App

Antarell said:
Just to let you know. I have flashed with the full 4.0.3 (not CWM/rooted one), and then used the first method here to restore back to 3.0.1, then installed CWM to install a ROM without any problems. I have since updated to 4.0.3 full again as it's by far the best ROM for me.
Click to expand...
Click to collapse
Thanks Antarell,
This is good to know for people who would be nostalgic of Honeycomb
By the way, there is a simplier way to go back to HC with a root. That's the one I've used several times with no bad issue: http://forum.xda-developers.com/showthread.php?t=1307539

This leak flies. Its awesome. Actually makes me not care about losing recovery. I really couldn't ask for more from this. At least we know there's a way back if we really need it.

Working: OTA updates on a rooted HTC One with an unlocked bootloader

Working: OTA updates on a rooted device with an unlocked bootloader
Ok, finally i've managed to do an OTA update on a rooted device with unlocked bootloader, using the following steps:
Step 1: flash back the stock recovery (can be found in the OTA update rar file, in the firmware package).
Step 2: install back the missing APK files, lost during unlocking the bootloader (can be found here: http://sharesend.com/ulxcsxa9)
Step 3: Perform the OTA update normally
Step 4: Flash back the custom recovery using fastboot
Step 5: Go to the custom recovery en press reboot system, in my case CWM asked me to Fix the root and i did.
Notice that there will be no loss of any data, everything should be working fine after following these steps. Just flash back the custom recovery and regain root acces (if CWM won't ask to do it for you) by using rooting tools or rootkeeper.

I think you mean recovery instead of bootloader in steps 1, 4, and 5.
Sent from my HTC One using Tapatalk 2

bender.h said:
I think you mean recovery instead of bootloader in steps 1, 4, and 5.
Sent from my HTC One using Tapatalk 2
Click to expand...
Click to collapse
Correct, i just made the correction.

I don't think this belongs in development
Sent from my HTC One using Tapatalk 4 Beta

This is nothing new but it's a good guide anyway and if you made OTA updates work with a custom recovery etc then that would be excellent news.

Hey it seems like the files in the OP don't exist or sharesend hates me, if someone could reupload them that would be awesome.

genericsauce said:
Hey it seems like the files in the OP don't exist or sharesend hates me, if someone could reupload them that would be awesome.
Click to expand...
Click to collapse
Uploading now.....
EDIT:
Here you go https://docs.google.com/file/d/0BzXWB5B2uUs7R2hjQnN3NFFNNVk/edit?usp=sharing

shadowboy23 said:
Uploading now.....
EDIT:
Here you go https://docs.google.com/file/d/0BzXWB5B2uUs7R2hjQnN3NFFNNVk/edit?usp=sharing
Click to expand...
Click to collapse
Any link for the Stock kernel and recovery?
Thanks

You mean this works with custom ROM, or should I flash back stock rom ? (I only find OTA for 2.24.401.1)
Edit : I've lost my nandroid backup of stock rom trying unsuccessfully to change firmware...

Just wondering if #3 is absolutely required? Cuz I think most custom ROM has at least some of these APK cooked-in.

BB88 said:
Just wondering if #3 is absolutely required? Cuz I think most custom ROM has at least some of these APK cooked-in.
Click to expand...
Click to collapse
Checked on ARDH. Some of them are missing...

Okay now my main question is, Since taking the OTA is possible on a stock custom Rom, if I have the 1.27.531.11 firmware update (tmobile) and I wanted to flash the 1.27.531.7 Rom, and take the .8 OTA, would it restore the .8 1.44 hboot that wasn't modified and allow me to S-Off? I got as far as trying to take the OTA but it didn't work because I forgot to flash the missing apk's.
Sent from my HTC One using xda app-developers app

BB88 said:
Just wondering if #3 is absolutely required? Cuz I think most custom ROM has at least some of these APK cooked-in.
Click to expand...
Click to collapse
By #3 you mean step 2 ?

cubitusclaudius said:
By #3 you mean step 2 ?
Click to expand...
Click to collapse
Sorry, yes I meant step 2.

cubitusclaudius said:
Checked on ARDH. Some of them are missing...
Click to expand...
Click to collapse
OTA's only work if you are completely stock, if you change some system file the update will fail, so on custom roms official otas will never work

godutch said:
OTA's only work if you are completely stock, if you change some system file the update will fail, so on custom roms official otas will never work
Click to expand...
Click to collapse
Yes, I know that, that's why I'm searching for a stock 2.24.401.1 rom to install on my device. I found a deodexed one (very slow download - about half an hour for 3%) but don't know if it fits ?
can I install an OTA ROM (I downloaded one but I'm afraid to make a mistake)
I searched a lot and I am asking in several threads, and still no answer...

cubitusclaudius said:
Yes, I know that, that's why I'm searching for a stock 2.24.401.1 rom to install on my device. I found a deodexed one (very slow download - about half an hour for 3%) but don't know if it fits ?
can I install an OTA ROM (I downloaded one but I'm afraid to make a mistake)
I searched a lot and I am asking in several threads, and still no answer...
Click to expand...
Click to collapse
I think you want something else than otas but you thinks otas are the solution to your problem, so you are focussing on getting otas to work but what do you really want fixed?
Anyway deodexed roms don't get otas either only stock odexed roms

godutch said:
I think you want something else than otas but you thinks otas are the solution to your problem, so you are focussing on getting otas to work but what do you really want fixed?
Anyway deodexed roms don't get otas either only stock odexed roms
Click to expand...
Click to collapse
Thank you for the second part of your answer. for the first part, I have a good running device with ARDH 13.3 and no problem,
I want OTA updates only for firmware update as I don't have s-off. so with ARDH it is impossible. I need a stock ROM that matches my device ( 2.24.401.1 and CID HTC_102) where can I get that?

cubitusclaudius said:
Thank you for the second part of your answer. for the first part, I have a good running device with ARDH 13.3 and no problem,
I want OTA updates only for firmware update as I don't have s-off. so with ARDH it is impossible. I need a stock ROM that matches my device ( 2.24.401.1 and CID HTC_102) where can I get that?
Click to expand...
Click to collapse
If you want otas, ask Mike why he choses not to do them, else just put up with checking the thread and downloading+installing a new version every couple of weeks. If you want OTAs on ARHD Mike needs to let them happen, no amount of tinkering on your part, even with s-off, will achieve this

godutch said:
If you want otas, ask Mike why he choses not to do them, else just put up with checking the thread and downloading+installing a new version every couple of weeks. If you want OTAs on ARHD Mike needs to let them happen, no amount of tinkering on your part, even with s-off, will achieve this
Click to expand...
Click to collapse
Uh, I think the poster is referring to official OTAs with firmware updates, not OTA updates to ARHD
---------- Post added at 09:35 PM ---------- Previous post was at 09:28 PM ----------
cubitusclaudius said:
Thank you for the second part of your answer. for the first part, I have a good running device with ARDH 13.3 and no problem,
I want OTA updates only for firmware update as I don't have s-off. so with ARDH it is impossible. I need a stock ROM that matches my device ( 2.24.401.1 and CID HTC_102) where can I get that?
Click to expand...
Click to collapse
Stock odexed 2.24.401.8 ROM here
http://android-revolution-hd.blogspot.com.au/p/android-revolution-hd-mirror-site-var.html