Database Users

[Q] How to return to stock 2.3.340 after the ota update

So i have a roted droid x running rubix 1.9.0. I went back all the way to stock 2.2.1 so i could do the ota from verizon. downloaded it and installed it and was good. when my phone was rebooted by the download, i went back to rooting it with z4. i am not a noob but in no way an expert and was occupied with something else at the moment and didnt think about what i was doing and flashed a backup of exactly what i was running before the update. now i cant figure out how to get back to 2.3.340 on my phone. am i going to have to wait until a sbf file comes out for it because now in my about phone it reads like the photo i posted. now i dont know if i can go back because i never made a backup after i installed the ota and all the backups i have are from 2.2.1. and im pretty sure ill brick my phone if i sbf back to 2.2 through rsd lite. so now im not sure what i can or should do if i have any options or not or if i have to wait for a real 2.3.340 sbf.
please help!!!! thanks

im dumb and figured out everything.....but i love to learn and figure things out....reading and trying things out from this site deserves all the thanks!!

Post your fix
Post your fix "Always" so if anyone has the same problem, they will have the answer.
Thanks

spywiz said:
Post your fix "Always" so if anyone has the same problem, they will have the answer.
Thanks
Click to expand...
Click to collapse
no problem....i was able to do everything that TBH had shown
mydroidworld.com/forums/droid-x-discussion/5789-tbh-patches-2-3-340-system-baseband-2-3-340-kernel-bootloader.html
i just cleared data/cache and then went into clockwork and applied the 2.3.340 system updater and i was back to stock. now ive gone back to root and already am rocking out with tranq 3.6.0 thanks TBH!!!

Dont wanna brick my atrix

Im sure all the info is here already but im pretty nervous about bricking my phone. I'm on 1.2.6 but it kept asking me to update over and over and i would hit no but it popped up at the wrong time and i hit yes and it rebooted the phone and tried to do it. I pulled the battery out to stop it and booted it back up but now in my notifications it says next time i connect to wifi it will install 4.1.57. So my question is do i have to flash back to a stock rom (im on the gingurblur rom) before i can run the update. Also i used aroot to root the phone so since i already rooted if i flash back to stock rom and update to 4.1.57 ill retain root?

fallchild said:
Im sure all the info is here already but im pretty nervous about bricking my phone. I'm on 1.2.6 but it kept asking me to update over and over and i would hit no but it popped up at the wrong time and i hit yes and it rebooted the phone and tried to do it. I pulled the battery out to stop it and booted it back up but now in my notifications it says next time i connect to wifi it will install 4.1.57. So my question is do i have to flash back to a stock rom (im on the gingurblur rom) before i can run the update. Also i used aroot to root the phone so since i already rooted if i flash back to stock rom and update to 4.1.57 ill retain root?
Click to expand...
Click to collapse
In order to update you will need to flash 4.1.26 if you don't then while trying to install the update it will fail. Once you update you will lose root and you will lose gingerblur as there isn't one for 1.57 right not. But you can keep root if you follow these instructions. Hope this helps.
http://forum.xda-developers.com/showthread.php?t=1016060
PS. None of this will brick your phone just read all instructions and you'll be alright.
Sent from my MB860 using XDA Premium App

[Q] Help to Uninstall ver. 2.3.3

I had the Liberty 1.5 ROM on my Droid Rooted with Rom Manager Clock Work recovery and everything was fine until..
I found a file on the web called Monster_D2_2.3.2_4.5.153 I used Clock Work recovery and installed it.
Now my phone says I have Android Version 2.3.3 Build Number STAB
Kernal Version: 2.6.32.9-gd72dc5da20523
It's running fine but I have lost ClockWork Recovery. I can not root the phone after trying several different methods. I can not install anything on it with its stock recovery without getting a signiture failure in the stock recovery and worst of all I can not uninstall it or overwrite it with anything I have loaded on the SD card.
I would be happy to remove this build and re-install Liberty.
I would be even more happy If I could just get this rooted and have my clockwork recovery back.
can anyone help me by pointing me to a thread or link that can help?
Thanks SO much
Gingerbread Dead :0

The problem is that there isn't a known process for rooting Gingerbread (except for installing a pre-rooted ROM)
SBF back to stock, and then you should be able to root, install clockworkmod, and then reinstall Liberty.
pcwebiz said:
I had the Liberty 1.5 ROM on my Droid Rooted with Rom Manager Clock Work recovery and everything was fine until..
I found a file on the web called Monster_D2_2.3.2_4.5.153 I used Clock Work recovery and installed it.
Now my phone says I have Android Version 2.3.3 Build Number STAB
Kernal Version: 2.6.32.9-gd72dc5da20523
It's running fine but I have lost ClockWork Recovery. I can not root the phone after trying several different methods. I can not install anything on it with its stock recovery without getting a signiture failure in the stock recovery and worst of all I can not uninstall it or overwrite it with anything I have loaded on the SD card.
I would be happy to remove this build and re-install Liberty.
I would be even more happy If I could just get this rooted and have my clockwork recovery back.
can anyone help me by pointing me to a thread or link that can help?
Thanks SO much
Gingerbread Dead :0
Click to expand...
Click to collapse

Yup, SBF is the way to go.
SBF Guide:
http://forum.xda-developers.com/showthread.php?t=770224 (be sure to use RSDlite 4.9)
SBF Download:
h t t p://www.mydroidworld.com/forums/droid-2-discussion/5323-tbh-mydroidworld-present-droid-2-2-3-20-triple-threat.html
If you made a backup of liberty before you installed 2.3.3, after you root and put clockwork on, you should be able to just restore it.
It's always good to do as much research as you can before trying anything like that.

I installed VRZ_A955_2.3.20_1FF_01.sbf
Then I was able to root the phone and use my root applications. The device is very slow and too sketchy to complete anyone task so it was a failure.
Now with your advice I should get back on the right track. Thank You very much for the response. I thought for a moment I might have to drop my phone on the pavement and go to phoneclaim dot com. But you cant learn anything taking the easy way out. lol I'll post the outcome.

pcwebiz said:
I installed VRZ_A955_2.3.20_1FF_01.sbf
Then I was able to root the phone and use my root applications. The device is very slow and too sketchy to complete anyone task so it was a failure.
Now with your advice I should get back on the right track. Thank You very much for the response. I thought for a moment I might have to drop my phone on the pavement and go to phoneclaim dot com. But you cant learn anything taking the easy way out. lol I'll post the outcome.
Click to expand...
Click to collapse
Yup, as long as you can get the phone into bootloader mode, the phone isn't bricked.
Hope everything works out!
Sent from my Liberated DROID 2

I've had that performance problem after SBF'ing as well. I think I cleared data and rebooted a couple times to address the issue...

Complete Recovery!
Thank You SO much!

I began having a black screen.after a few weeks on gingerbread so I decided to sbf back to froyo but it failed now my phone gives the MOTO logo and goes directly to a black screen. I can't get it into flash mode even with holding the arrow up key. I'm out of ideas here so I'm really hoping to find a way to get this working again without being worried that its truly bricked. Any help would be greatly appreciative.

Have you been able to boot into anything else, such as the stock recovery?

[Q]Just plain lost

Ok so as my previous post stated I just got my droid x and rooted it. I am in the process of installing a rom but have failed at this point.
For starters I have the droid x bootstrap installed and "running". Buy "running" I mean I can get to the clockwork recovery but only buy the bootstrap button or battery pull for 1min then boot. Booting while holding the home button stops at the exclamation android guy. I cant get past it no matter how hard I push the search button . So thats one of my problems but not a big one.
When I went to install liberty 1.5 I did a data factory reset and catch wipe then installed the rom. It got stuck on the liberty logo. So I tried again this time following the guide on these forms on how to install a rom correctly. Same thing. I tried three more times following three different guides and still was stuck at the liberty logo. So I gave up and followed the install guide on these forms again, but just restored from my backup. I am good and running again but I still have the liberty logo, which from what I read is normal.
When I got home from work I started digging into why it didn't work and found several things that may cause it. Now this is where I get lost. I have read the sometimes it just fails and you need to try again. But I also read the doing a SBF will also fix this. So I dug into what a SBF is and how to do it since this seams to be the #1 fix for everything. WHAT, UHH, MMMMM, K. So I read you will need to flash 2 files to SBF successfully. I have no problems with the RSD lite as it is only one file and you cant screw that up. But then I comes to choosing the right SBF file for your phone I get lost. All the versions listed are WAY below what I have. I am currently on 4.5.588. So I jumped over to androidforms to see if theirs anything their. They list x.x.596 as the most recent OTA but when I go to check for updates it says there are none.
SO, my questions are:
Is the reason I cant flash the liberty rom because I am running 4.5.588?
What do I flash if I need to SBF?
What am I missing about this OTA update? Is it being rolled out now or is my rom the most recent OTA?
Is their anything else I need to know that might help me in the future? Like I said I am new to this area of the forms and have not clew whats being released, changed, rooted, or what ever else.
I came from a rooted eris so Im not root dumb. But their is a big difference between the eris and the X.
ANY HELP WOULD BE AWESOME THANKS!!!!!!!!

BrownEye02 said:
Ok so as my previous post stated I just got my droid x and rooted it. I am in the process of installing a rom but have failed at this point.
For starters I have the droid x bootstrap installed and "running". Buy "running" I mean I can get to the clockwork recovery but only buy the bootstrap button or battery pull for 1min then boot. Booting while holding the home button stops at the exclamation android guy. I cant get past it no matter how hard I push the search button . So thats one of my problems but not a big one.
When I went to install liberty 1.5 I did a data factory reset and catch wipe then installed the rom. It got stuck on the liberty logo. So I tried again this time following the guide on these forms on how to install a rom correctly. Same thing. I tried three more times following three different guides and still was stuck at the liberty logo. So I gave up and followed the install guide on these forms again, but just restored from my backup. I am good and running again but I still have the liberty logo, which from what I read is normal.
When I got home from work I started digging into why it didn't work and found several things that may cause it. Now this is where I get lost. I have read the sometimes it just fails and you need to try again. But I also read the doing a SBF will also fix this. So I dug into what a SBF is and how to do it since this seams to be the #1 fix for everything. WHAT, UHH, MMMMM, K. So I read you will need to flash 2 files to SBF successfully. I have no problems with the RSD lite as it is only one file and you cant screw that up. But then I comes to choosing the right SBF file for your phone I get lost. All the versions listed are WAY below what I have. I am currently on 4.5.588. So I jumped over to androidforms to see if theirs anything their. They list x.x.596 as the most recent OTA but when I go to check for updates it says there are none.
SO, my questions are:
Is the reason I cant flash the liberty rom because I am running 4.5.588?
What do I flash if I need to SBF?
What am I missing about this OTA update? Is it being rolled out now or is my rom the most recent OTA?
Is their anything else I need to know that might help me in the future? Like I said I am new to this area of the forms and have not clew whats being released, changed, rooted, or what ever else.
I came from a rooted eris so Im not root dumb. But their is a big difference between the eris and the X.
ANY HELP WOULD BE AWESOME THANKS!!!!!!!!
Click to expand...
Click to collapse
im no pro but hopefully this info will help you, it did me.
http://forum.xda-developers.com/showthread.php?t=1073841 liberty info
http://forum.xda-developers.com/showthread.php?t=1085323 sbf'ing
The new 2.3.3 OTA is stable and very nice looking on my DX, OTA not rootable yet but give it time.
Biggest life saver about the DX is the the part of the phone that ppl mess up and turn their phones to bricks is extremely safe on the X, not bulletproof but all the info in these forums I believe can bring them back regardless of what happens. I was very overwhelmed at first with my X but very comfortable now that ive successfully managed the sbf.

Yeah that's one of the things I really noticed. If you brick your phone it seams its not the end. So im still a little confused with your explanation on SBFing. You say that 2.3.3 is the latest OTA but its not rootable. So am I looking at the wrong number when I say my version is 4.5.588.
Sent from my Rooted DROIDX.

Reading the noobs guide to droid x allowed me to figure out that I have the 30.04 bootloader and I will need to flash the 2.3.34 file. But I would still like to know why my version is so much higher then 2.3.34.

By far, this is the easiest way to sbf back to stock froyo
http://www.droidxforums.com/forum/d...-solution-your-windows-rsd-lite-problems.html
Sent from my Xoom using XDA Premium App

chbennett said:
By far, this is the easiest way to sbf back to stock froyo
http://www.droidxforums.com/forum/d...-solution-your-windows-rsd-lite-problems.html
Sent from my Xoom using XDA Premium App
Click to expand...
Click to collapse
WOW that is easy. To bad you cant select what version it flashes. But still EASY. Ill keep that in mind if I need to SBF. THANKS!

http://droidmodderx.wordpress.com/how-to-sbf-your-droid-x-full-2-3-340/
Good video tutorial there... It also has files there as well
Sent from my DROIDX using XDA App

Well I gave liberty 1.5 another try and it still got stuck on the liberty screen. Any ideas?
Sent from my Rooted DROIDX.

Was able to flash the liberty gingerbread rom tonight! I am kind of wondering if the version of ota/bootloader I have is the reason liberty 1.5 wouldn't work for me.

BrownEye02 said:
Reading the noobs guide to droid x allowed me to figure out that I have the 30.04 bootloader and I will need to flash the 2.3.34 file. But I would still like to know why my version is so much higher then 2.3.34.
Click to expand...
Click to collapse
your looking at the version of the software build, complete jargon here but say your on android 2.2.1 version blah blah blah, what i was referring to was although you may have a higher version of 2.2.1 than what you are reading, a lower version of a higher android software such as 2.3.3 is better than a higher version of 2.2.1 same page?

[Q] How To Needed - update from 2.2.1

I've been running Liberty on my Droid X for some time now and love it compared to the stock Blur interface. But it's gotten to the point where I'd like to update from Froyo to one of the more modern versions and see if that can liven up the phone again. So my question is this - from what I've read before I can update Liberty (or any other ROM for that matter) from a Froyo based version I need to restore the phone to a semi-stock state, update via an official OTA release, re-root and go from there. Is that true? If so, any convenient guide on how to do so? I did a bit of searching and couldn't find much and while I'm pretty technically inclined my skills do not extend into the phone region and back when I originally modified the phone there were many handy guides and videos to walk me through it.
Any help would be greatly appreciated.
Nate

If your bootloader version is 30.04, SBF to 4.5.602. From there you can flash any Gingerbread or ICS rom of your choice.
If your bootloader version is 30.03, SBF to 2.3.15 and take the OTA update.
Sent from my Transformer TF101 using Tapatalk

Let the stupid questions begin...
Ok, I confirmed that I'm running 30.04 and I found a site that maintains the correct 4.5.602 file so I downloaded that. Is there anything that I need to back up before installing? Also, I read that a special program is required to install the SBF files so any assistance there would be appreciated as well.
Thanks!

Ok, so I managed to track down RSD-Lite and got it to recognize the device and start loading the sbf file however the phone couldn't get past the "manually power up the phone" phase (or something like that). It just kept showing the boot animation over and over again regardless of what I did - it would cycle between the red eye and the DROID text. I tried pushing and holding the power button, no good and none of the other buttons did anything either. Nothing worked. So I'm rerunning it again and we'll see if the second time is a charm...

Well crap, I got through the SBF install process and got the pass message from RSD but now my phone is stuck at the animation and won't go any further. I've left it running for the better part of 10 minutes and it just hangs. I'm now performing a manual factory data wipe to see if that will help.
EDIT: It appears that the factory data wipe got me through the locked animation. Still having minor issues getting through the programing and setup phase but I think it'll work eventually.
Thanks again for the help.

infazzdar said:
If your bootloader version is 30.04, SBF to 4.5.602. From there you can flash any Gingerbread or ICS rom of your choice.
If your bootloader version is 30.03, SBF to 2.3.15 and take the OTA update.
Sent from my Transformer TF101 using Tapatalk
Click to expand...
Click to collapse
Minor question/problem for you, sir.
Wouldn't the OTA take you all the way to .621?
Wonderful...yet another thing we need to worry about that damn update <_<
OP:
Glad you got it worked out.

Well, it's sort of worked out.
Everything is up and running but ROM Toolbox isn't able to load any ROMs. It gets granted Superuser permission so I'm pretty sure that I've got the X rooted correctly but when it tries to boot into Clockwork it appears to get an error (icon with an exclamation point) and reboots into the regular Blur interface. I'm going to have a go at loading something like Liberty Gingerbread or 3.0 via zip file but it makes me nervous that the Toolbox Pro App can't get this done.

After determining that the Toolbox App was not booting into Clockwork I downloaded and installed the Droid X Bootstrapper App and got that running. It was able to correctly boot into recovery from which allowed me to install the Liberty 3 ROM. I'm now going back through the process of setting the phone up with the new ROM so we'll see how that goes. It appears to be working, but only time will tell if it's stable. One thing is for sure, a few hours on Blur'd Gingerbread and I was ready for something else again.

Jubakuba said:
Minor question/problem for you, sir.
Wouldn't the OTA take you all the way to .621?
Wonderful...yet another thing we need to worry about that damn update <_<
OP:
Glad you got it worked out.
Click to expand...
Click to collapse
I was actually wondering whether it would or not, but I can't think of another way to update the bootloader.
Sent from my DROIDX using Tapatalk

Ok, so here's an issue that I'd appreciate some guidance on. After installing Liberty 3.0 it appears as if the phone can't fully charge. It was plugged in for 10hrs last night and yet this morning the battery only reads 61%. I don't know if it would be best to boot into recovery and wipe the battery stats not knowing if it's fully charged or not.
Thoughts?