Database Users

Trouble with all ROMs

I bought a DX earlier this week. It was updated to system 2.3.340 before i left the store. I also have a D2 and experience flashing ROMs and SBFing. What is puzzling me here is that no matter what ROM I install i get random reboots. This happens no matter what apps, activities, etc... i am doing, even when just idle, i will look down and phone is rebooting. I haven't tried SBFing the DX yet because i can't find a clear answer on how i need to do it. I know that a full .340 SBF does not exist yet. I have a full .32 SBF file and a system only .340 file. I am assuming that i would flash the .32 full, then the .340, or could i just flash the .32 and then let the phone update the factory way to .340? I am getting this reboot problem with Rubix 1.9.5, Fission 2.4.3, and GummyJar 2.5. Any advice, input, or help would be greatly appreciated. THanks in asvance.

willjohnson said:
I bought a DX earlier this week. It was updated to system 2.3.340 before i left the store. I also have a D2 and experience flashing ROMs and SBFing. What is puzzling me here is that no matter what ROM I install i get random reboots. This happens no matter what apps, activities, etc... i am doing, even when just idle, i will look down and phone is rebooting. I haven't tried SBFing the DX yet because i can't find a clear answer on how i need to do it. I know that a full .340 SBF does not exist yet. I have a full .32 SBF file and a system only .340 file. I am assuming that i would flash the .32 full, then the .340, or could i just flash the .32 and then let the phone update the factory way to .340? I am getting this reboot problem with Rubix 1.9.5, Fission 2.4.3, and GummyJar 2.5. Any advice, input, or help would be greatly appreciated. THanks in asvance.
Click to expand...
Click to collapse
try here http://rootzwiki.com/index.php/Smartphones/Motorola/Droid-X/Droid-X.html#comment220 scroll down towards the end (idk if you use windows or linux but the linux method of sbf'ing is alot easier ive used both) except in their directions it says an older sbf file just insert the one you have, then go here http://www.mydroidworld.com/forums/...ystem-baseband-2-3-340-kernel-bootloader.html to download these zip files for kernel updater, 340 system update your baseband and bootloader should already be the correct ones, (i recently bought my X too) then once you finally root your newly sbf'd X and installed droid x bootstrap etc and get into clockwork mod recovery you can flash those 2 zips (recommend flashing only one at a time, reboot, and do the next) and then you should be updated to full .340
gl

http://forum.xda-developers.com/showthread.php?t=869007
heres a thread with discussion about those update zips

Thanks for the quick replies. Gonna try your suggestion tonight or tomorrow. Now i get random lock ups followed by a boot after about five minutes. The only upside right now is that its 4 days old so if i can get some resemblance of factory back on it then i can just exchange it Thanks again will report back with results.
And also by "insert the file you have", i assume you mean the file i have that is VRZ_MB810_2.3.32_01.sbf is the file i need to use in RSD Lite, then update the other files with clockwork recovery?
Thanks again.

willjohnson said:
And also by "insert the file you have", i assume you mean the file i have that is VRZ_MB810_2.3.32_01.sbf is the file i need to use in RSD Lite, then update the other files with clockwork recovery?
Thanks again.
Click to expand...
Click to collapse
correct tho the one i used had was labeled VRZ_MB810_2.3.32_1FF_01.sbf

I guess the one i got is ok? it came from the TBH app from the market? I would like to get ahold of the one you got too if thats possible, since you know that file works.
LOL i am a dumbass, left the FF part out for somereason, thats the exact file name i have. Thanks again.\
Edit- Just tried this, i don't know whats wrong but it has the start button in RSD Lite greyed out when i select the file, its the exact one listed above. Gonna try same file from different locations

Ok, so now i am starting to worry. Tried 3 different .320 full sbf's. All the same result. Failed process close to the begging. Then on the phone it says
Critical Error
FEBE
0047
Please Helppppp. I don't need a really expensive paperweight, all i need to do is get it so that GummyJar doesn't show on boot and i can take it back, its brand new.

Try removing the battery. Then boot into recovery (volume down + power) then do a factory reset/restore.
Sent from my ADR6300 using XDA App

Tried that, i finally got it to flash, i had the phone in the desk dock, didn't think about it. Once i plugged it into the usb cable direct everything went fine(so far). Also i noticed that with this phone and my wifes D2, i have to put a (1) at the end of the sbf file name to get RSD Lite to use it, otherwise the start button stays greyed out. THanks for the replies and help, will post again if there are any more problems.

willjohnson said:
Tried that, i finally got it to flash, i had the phone in the desk dock, didn't think about it. Once i plugged it into the usb cable direct everything went fine(so far). Also i noticed that with this phone and my wifes D2, i have to put a (1) at the end of the sbf file name to get RSD Lite to use it, otherwise the start button stays greyed out. THanks for the replies and help, will post again if there are any more problems.
Click to expand...
Click to collapse
ive heard there are several problems with rsd lol thats why ive stuck with my ubuntu/Linux its 10x easier

willjohnson said:
I guess the one i got is ok? it came from the TBH app from the market? I would like to get ahold of the one you got too if thats possible, since you know that file works.
LOL i am a dumbass, left the FF part out for somereason, thats the exact file name i have. Thanks again.\
Edit- Just tried this, i don't know whats wrong but it has the start button in RSD Lite greyed out when i select the file, its the exact one listed above. Gonna try same file from different locations
Click to expand...
Click to collapse
i also believe you DO have to have it all in specific locations but idk i use linux to do it, if you continue to play with the X after u get new one i would read up on how to dual boot ubuntu its a whole lot easier once you find ur way around i have it booting off of a 1TB external hard drive no need to install the correct moto drives etc..just plain easy lol

Finally total success!!!! Flashed .320 Full SBF, then used the Kernel and System updates you referenced and bam, back to stock. Now i feel better about ROM flashing, cause i can recover from most anything with this process. THanks again for your help and info.

willjohnson said:
Finally total success!!!! Flashed .320 Full SBF, then used the Kernel and System updates you referenced and bam, back to stock. Now i feel better about ROM flashing, cause i can recover from most anything with this process. THanks again for your help and info.
Click to expand...
Click to collapse
it only takes once correctly doing it to feel comfortable lol also make sure using droid x bootstrap recovery make sure to tap the first choice and let it do its thing, otherwise it will constantly reboot to recovery EVERY time you turn it back on

Well... the SBF and updating where successful. But even after the SBF, SD Card Formating(Long format in windows, then 3 times on phone to be sure), clean install and download of all Fission stuff i normally use, still get random reboots. Gonna SBF again and try Rubix and see how that goes. If it still has problems too, i may SBF again and go to the store and return phone for a new one.

willjohnson said:
Well... the SBF and updating where successful. But even after the SBF, SD Card Formating(Long format in windows, then 3 times on phone to be sure), clean install and download of all Fission stuff i normally use, still get random reboots. Gonna SBF again and try Rubix and see how that goes. If it still has problems too, i may SBF again and go to the store and return phone for a new one.
Click to expand...
Click to collapse
try something blurless like darkslide, which im currently running, no random reboots

Funnyface19 said:
try something blurless like darkslide, which im currently running, no random reboots
Click to expand...
Click to collapse
LOL funny you should mention, thats what i actually decided to go with instead. It really looks great, seems to be seemless too. Since you use it maybe you could tell me... Can you overclock? I downloaded the blurless version from their link and it has the blur alarm clock and a few others? is this right or is something wrong with the link? Thanks again.

willjohnson said:
LOL funny you should mention, thats what i actually decided to go with instead. It really looks great, seems to be seemless too. Since you use it maybe you could tell me... Can you overclock? I downloaded the blurless version from their link and it has the blur alarm clock and a few others? is this right or is something wrong with the link? Thanks again.
Click to expand...
Click to collapse
Well I haven't overclocked yet anyway the phone gets hot enuf lol plus coming from an Eris 1k is fast lol
Um yeah it should be wright depends on what the blur clock looks like lol
Sent from my DROIDX using XDA App

I looked back at there post in another forum and it actually says that they added a few Blur parts in the blurless rom. I guess some blur things just work better.

willjohnson said:
I looked back at there post in another forum and it actually says that they added a few Blur parts in the blurless rom. I guess some blur things just work better.
Click to expand...
Click to collapse
yeah but the obsidian rom is completely blurless just not everything working

Running DarkSlide4.1 can't tell u last I had a reboot
Sent from my DROIDX using XDA App

[Q] Help to Uninstall ver. 2.3.3

I had the Liberty 1.5 ROM on my Droid Rooted with Rom Manager Clock Work recovery and everything was fine until..
I found a file on the web called Monster_D2_2.3.2_4.5.153 I used Clock Work recovery and installed it.
Now my phone says I have Android Version 2.3.3 Build Number STAB
Kernal Version: 2.6.32.9-gd72dc5da20523
It's running fine but I have lost ClockWork Recovery. I can not root the phone after trying several different methods. I can not install anything on it with its stock recovery without getting a signiture failure in the stock recovery and worst of all I can not uninstall it or overwrite it with anything I have loaded on the SD card.
I would be happy to remove this build and re-install Liberty.
I would be even more happy If I could just get this rooted and have my clockwork recovery back.
can anyone help me by pointing me to a thread or link that can help?
Thanks SO much
Gingerbread Dead :0

The problem is that there isn't a known process for rooting Gingerbread (except for installing a pre-rooted ROM)
SBF back to stock, and then you should be able to root, install clockworkmod, and then reinstall Liberty.
pcwebiz said:
I had the Liberty 1.5 ROM on my Droid Rooted with Rom Manager Clock Work recovery and everything was fine until..
I found a file on the web called Monster_D2_2.3.2_4.5.153 I used Clock Work recovery and installed it.
Now my phone says I have Android Version 2.3.3 Build Number STAB
Kernal Version: 2.6.32.9-gd72dc5da20523
It's running fine but I have lost ClockWork Recovery. I can not root the phone after trying several different methods. I can not install anything on it with its stock recovery without getting a signiture failure in the stock recovery and worst of all I can not uninstall it or overwrite it with anything I have loaded on the SD card.
I would be happy to remove this build and re-install Liberty.
I would be even more happy If I could just get this rooted and have my clockwork recovery back.
can anyone help me by pointing me to a thread or link that can help?
Thanks SO much
Gingerbread Dead :0
Click to expand...
Click to collapse

Yup, SBF is the way to go.
SBF Guide:
http://forum.xda-developers.com/showthread.php?t=770224 (be sure to use RSDlite 4.9)
SBF Download:
h t t p://www.mydroidworld.com/forums/droid-2-discussion/5323-tbh-mydroidworld-present-droid-2-2-3-20-triple-threat.html
If you made a backup of liberty before you installed 2.3.3, after you root and put clockwork on, you should be able to just restore it.
It's always good to do as much research as you can before trying anything like that.

I installed VRZ_A955_2.3.20_1FF_01.sbf
Then I was able to root the phone and use my root applications. The device is very slow and too sketchy to complete anyone task so it was a failure.
Now with your advice I should get back on the right track. Thank You very much for the response. I thought for a moment I might have to drop my phone on the pavement and go to phoneclaim dot com. But you cant learn anything taking the easy way out. lol I'll post the outcome.

pcwebiz said:
I installed VRZ_A955_2.3.20_1FF_01.sbf
Then I was able to root the phone and use my root applications. The device is very slow and too sketchy to complete anyone task so it was a failure.
Now with your advice I should get back on the right track. Thank You very much for the response. I thought for a moment I might have to drop my phone on the pavement and go to phoneclaim dot com. But you cant learn anything taking the easy way out. lol I'll post the outcome.
Click to expand...
Click to collapse
Yup, as long as you can get the phone into bootloader mode, the phone isn't bricked.
Hope everything works out!
Sent from my Liberated DROID 2

I've had that performance problem after SBF'ing as well. I think I cleared data and rebooted a couple times to address the issue...

Complete Recovery!
Thank You SO much!

I began having a black screen.after a few weeks on gingerbread so I decided to sbf back to froyo but it failed now my phone gives the MOTO logo and goes directly to a black screen. I can't get it into flash mode even with holding the arrow up key. I'm out of ideas here so I'm really hoping to find a way to get this working again without being worried that its truly bricked. Any help would be greatly appreciative.

Have you been able to boot into anything else, such as the stock recovery?

[Q] GingerAle to liberty

Is there anyway to reboot recovery on the GingerAle ROM? Just installed it on a friends DX and she isnt a fan so I wanted to revert her back to liberty. Any thoughts on how I can do this would help Bootstrapper isnt letting me reboot to recovery and when i try to manually reboot recovery pushing the search button does nothing once im on the android with ! screen. any help would be appreciated. Thank you.

Are you trying DX or D2 Bootstrapper? Most Ginger builds require D2.

Using the DX bootstrap. I wanted to ask for any other thoughts before trying the D2 one. Will give it a shot today and report back

So d2 bootstrap allowed me to get back into recovery but after flashing liberty 1.5 it hangs on the liberty bootscreen. Anyone able to give me any help on this problem? Doing this for a friend and realizing why I will NEVER buy a locked down phone.

You can't go from a GB rom to a Froyo rom, you'll need to SBF back to 2.3.340, then go to LB 1.5. However, if you didn't, you can try wiping data/cache again, but I'm fairly certain a SBF is required to go back from GB.

I just did this. Cause I was trying to go back to Liberty to recover some of my data via Titanium. Was coming from gingerale too
SBF Back to absolute stock.
Itll probably bootloop. Pull battery and hold home and turn on. Then do a data reset and cache wipe.
After that reboot into stock droid x rom. Then download bootstrap
Then you can bootstrap back to liberty.
If you have questions hit me up. My phone literally just finished doing this. I thought i was screwed cause it was boot looping. But i'm good now.

p4ranoid4ndroid said:
So d2 bootstrap allowed me to get back into recovery but after flashing liberty 1.5 it hangs on the liberty bootscreen. Anyone able to give me any help on this problem? Doing this for a friend and realizing why I will NEVER buy a locked down phone.
Click to expand...
Click to collapse
The problem is that you flashed a froyo rom after coming from a gb rom and you probably didn't sbf. If you want to go gb to froyo, you MUST sbf back to stock froyo first. If you're not sure how to do this, there are tons of "how to" threads on here.
Sent from my DROIDX using Tapatalk

Thanks a lot guys. I figures an sbf would be required. I flashed gingerale 2.0 and she seems happy with it. Gonna investigate this sbf more. Coming from HTC and Samsung phones Motorola is a whole new world lol.

The SBF process is easy dude. At first glance it seems really complicated but there's really nothing to it. There's even youtube videos if you feel a little uneasy.

Gingerbread Update

So i was on liberty rom 2.0.1 and wanted to upgrade to the latest version in the nightlys. So i SBF back to version 2.3.320.MB810 and when i go to settings -> about phone -> systems update, it says i am already up to date. Can i get to gingerbread from this version or do i need to sbf to 2.3.340 to get to gingerbread.

I think you have to be on. 340, but I wouldn't encourage you to take the OTA to GB, download a prerooted .596 GB (team black hat...) then go from there.
Sent from my Xoom using XDA Premium App

So i sbf to .340 and tried to install the tbh .596 GB update, with the part1 and part 2 files. When i boot into recovery and try to apply the zip it give a error code of 7 during validation of the current system. According to the instructions the only thing i am not doing exactly is i am using the droid x boot straper not the droid 2. would that cause this. dont see the need to spend 3 bucks on something i already have

Try turning off USB Debugging prior to booting into recovery. I think I read somewhere that Droid X bootstrapper works fine as long as you do that first.

Ok so i hope someone can help me out on this i finally got to a TBH rooted GB install.
My next step is to get back on liberty because i just cant stand motoblur, gingerblut is a bit better than what came with froyo but it still sucks. the battery life is terrible and i cant stand all the bloat ware and crappy widgets.
I am not sure what issue i am having 3g data worked fine in liberty GB0.4 but if i ever moved past that it would stop working. So i spent a day and sbf to .340 then installed the TBH rooted stock GB. I then downloaded the libertyGB0.8 did a data wipe and installed it. No 3g data. I really love liberty have donated to them buying the pro toolbox and such. I really want to get back to liberty but i guess if i have to find a different rom i will . Anyone have any idea as to why if i go past liberty 0.4 i loose 3g?

Ok so this issue has expanded past just liberty. I tried to flash apex 2.0 rc1 with the same issue no 3g data. Phone calls and all of that work but no 3g data. i would really like some help with this dont want to get stuck on moto ginger. Will more than likely just go buy a different phone if i cant get this to work

You just need to flash the updated kernal. I had the same problem, and fixed it. let me see if I can find the thread with the info. All u need to do is download the zip file, put on sd card and flash. and itll work just fine. Ill look it up and post back. The 591_kernel_update.zip is what you need
Here is the file:
http://www.droidforums.net/forum/liberty-rom-dx/151857-no-3g-liberty-gb-0-7-a.html

[Q] How To Needed - update from 2.2.1

I've been running Liberty on my Droid X for some time now and love it compared to the stock Blur interface. But it's gotten to the point where I'd like to update from Froyo to one of the more modern versions and see if that can liven up the phone again. So my question is this - from what I've read before I can update Liberty (or any other ROM for that matter) from a Froyo based version I need to restore the phone to a semi-stock state, update via an official OTA release, re-root and go from there. Is that true? If so, any convenient guide on how to do so? I did a bit of searching and couldn't find much and while I'm pretty technically inclined my skills do not extend into the phone region and back when I originally modified the phone there were many handy guides and videos to walk me through it.
Any help would be greatly appreciated.
Nate

If your bootloader version is 30.04, SBF to 4.5.602. From there you can flash any Gingerbread or ICS rom of your choice.
If your bootloader version is 30.03, SBF to 2.3.15 and take the OTA update.
Sent from my Transformer TF101 using Tapatalk

Let the stupid questions begin...
Ok, I confirmed that I'm running 30.04 and I found a site that maintains the correct 4.5.602 file so I downloaded that. Is there anything that I need to back up before installing? Also, I read that a special program is required to install the SBF files so any assistance there would be appreciated as well.
Thanks!

Ok, so I managed to track down RSD-Lite and got it to recognize the device and start loading the sbf file however the phone couldn't get past the "manually power up the phone" phase (or something like that). It just kept showing the boot animation over and over again regardless of what I did - it would cycle between the red eye and the DROID text. I tried pushing and holding the power button, no good and none of the other buttons did anything either. Nothing worked. So I'm rerunning it again and we'll see if the second time is a charm...

Well crap, I got through the SBF install process and got the pass message from RSD but now my phone is stuck at the animation and won't go any further. I've left it running for the better part of 10 minutes and it just hangs. I'm now performing a manual factory data wipe to see if that will help.
EDIT: It appears that the factory data wipe got me through the locked animation. Still having minor issues getting through the programing and setup phase but I think it'll work eventually.
Thanks again for the help.

infazzdar said:
If your bootloader version is 30.04, SBF to 4.5.602. From there you can flash any Gingerbread or ICS rom of your choice.
If your bootloader version is 30.03, SBF to 2.3.15 and take the OTA update.
Sent from my Transformer TF101 using Tapatalk
Click to expand...
Click to collapse
Minor question/problem for you, sir.
Wouldn't the OTA take you all the way to .621?
Wonderful...yet another thing we need to worry about that damn update <_<
OP:
Glad you got it worked out.

Well, it's sort of worked out.
Everything is up and running but ROM Toolbox isn't able to load any ROMs. It gets granted Superuser permission so I'm pretty sure that I've got the X rooted correctly but when it tries to boot into Clockwork it appears to get an error (icon with an exclamation point) and reboots into the regular Blur interface. I'm going to have a go at loading something like Liberty Gingerbread or 3.0 via zip file but it makes me nervous that the Toolbox Pro App can't get this done.

After determining that the Toolbox App was not booting into Clockwork I downloaded and installed the Droid X Bootstrapper App and got that running. It was able to correctly boot into recovery from which allowed me to install the Liberty 3 ROM. I'm now going back through the process of setting the phone up with the new ROM so we'll see how that goes. It appears to be working, but only time will tell if it's stable. One thing is for sure, a few hours on Blur'd Gingerbread and I was ready for something else again.

Jubakuba said:
Minor question/problem for you, sir.
Wouldn't the OTA take you all the way to .621?
Wonderful...yet another thing we need to worry about that damn update <_<
OP:
Glad you got it worked out.
Click to expand...
Click to collapse
I was actually wondering whether it would or not, but I can't think of another way to update the bootloader.
Sent from my DROIDX using Tapatalk

Ok, so here's an issue that I'd appreciate some guidance on. After installing Liberty 3.0 it appears as if the phone can't fully charge. It was plugged in for 10hrs last night and yet this morning the battery only reads 61%. I don't know if it would be best to boot into recovery and wipe the battery stats not knowing if it's fully charged or not.
Thoughts?