[Q] Milestone doesnt work in the USA? With T-Mob - Milestone 2 General

Hey guys,
searched around but didn´t find anything that could help me. I m from germany and currently i'm in the US and want to use my milestone 2. bougth a t-mobile sim card but it doesn`t work. It doesn't work even with a german t mobile card, but with this one it shows me "(no service) / Telekom", with the T-Mobile US SIM it shows nuthin. Had the phone on the whole day...and i got a sms from t mobile. but i never saw signal bars. only this one sms from the "US SIM", nuthin more.
can anyone help?
it`s A953, aren2stone...
best regards

T-Mobile USA doesn't use the same bands/frequencies as other GSM providers. To use your phone in the USA, you should use AT&T.

w0ndersp00n said:
T-Mobile USA doesn't use the same bands/frequencies as other GSM providers. To use your phone in the USA, you should use AT&T.
Click to expand...
Click to collapse
It won't work on 3G, but still should on the 2G GSM network.

Milestone 2 data in USA
I got my A953 (UK) to send texts and make telephone calls on T-Mobile USA, but had a lot of difficulty getting any data to work - not even 2G.
I thought the Milestone 2 supports 3G on 900 and 2100 MHz, and T-Mobile USA uses 1700 and 2100 MHz - doesn't this mean the Milestone 2 should be able to access 3G data on the 2100 MHz frequency?

Related

3g problems

Hi. Newbie in this forum. Bought an htc tytn from u.s. but am from Phil using smart carrier with gsm band at 1800. after going thru sev topics, properly identified device as Herm200 rom:1.18.255.3 07/22/06 extrom:1.18.255.106 radio1.03.03.10 protocol32.34.7010.01H.
All phone features working perfectly except for 3G. Smart carrier people cannot help. What could be wrong. Vendor says 3g works on 2100 band. Confusing statement. What can be done? Connects to umts but when video call is pressed will not connect.
Which carrier are you on again? Smart Carrier? .. From what I know no carriers in the US support video calling .. Also, Cingular is the only GSM carrier in the US with 3G which runs on the 1900Mhz band ..
also .. what does your phone display while connected "G" or "U" ... what are your phone band settings .. can you also goto dslreports.com/mspeed and see what speeds are you getting ..
According to GSM world SMART (a Philippine operator) uses UMTS 2100, which your TyTN does definitely support.
Have you checked if your SIM card is 3G-enabled? Most 3G networks require special USIMs for 3G usage.
I just learned, that Cingular uses UMTS 850 and 1900 to be exact. According to the American HTC website the Cingular 8525 supports "Tri-band UMTS/HSDPA high speed wireless data network support (2100MHz and 850/1900 MHz), Quad-band GSM®/GPRS/EDGE worldphone".
Does anyone know if there is a special hardware version, that supports UMTS850 & 1900 or will my European TyTN work on those networks, too?
TyTN is tri-band UMTS .. 850/1900/2100 .. so it should work on these networks without any issues ...
And my bad .. didnt realize that you are trying to use the TyTN in Phillipines ..
You should also check, if the called party has a 3G signal, while you call him. Further make sure video calls are activated by your network operator.
3g problems in the philippines
Everything you guys mentioned in order(am in a 3g area calling a 3g enabled party with a 3g sim card). Even the tech staff behind Smart Communications cannot make it work. Displays U and u. But video call cannot push thru even if pic on front camera shows. There is 1 thin line( or command?) stopping it from connecting. My last option is to borrow my friend's unit and see if her unit's 3g works here then it's my device that's a problem. Thnks for the input. Keep it coming.
Herm200 qwerty rom:1.18.255.3
07/22/06
extrom:1.18.255.106
radio1.03.03.10
protocol32.34.7010.01H.
Hi. I don't know how they did it but Smart Communications did it! Apparently and ironically their 3g sim card is not compatible with the htc tytn but their regular sim is. Thanks all.
are u using 3G now in Phil ?
Is there a Globe perpaid 3G simcard ?
3g problems no more
Hi everyone. After my first thread i have finally got everything on my tytn working: 3g, mms, internet, phone. The problem was on the settings. Smart and Globe, the primary carriers in the Philippines can both work on the phone if the settings are right.
sectorlord,
yes there is 3g and hsdpa along with gsm and gprs and wap in the philippines. and yes you can buy globe prepaid 3g sim card.
glad to hear you've got your problems solved jjc!

KS20 3G att Network?Possible?

hello I have searched all over the place before writing this.
I have a KS20 , unbranded. I have a data plan with ATT, a 3G sim card, I tried different cag with att settings. I have internet, GPRS, my MMS and sms work fine.
But can t get an H or 3G connection?
Any clue? I always like having a PPC, and the reason why I did not get an IPHONE.(Though i have an iphone 3G, still in the box)...
LG KS20 is a European phone.
It uses the European 3g/umts/hsdpa band. It's not compatible with America's.
Sorry to disappoint you.
Hum that s what i thought, i guess i stay on the GPRS, though somehow today i was able to get on EDGE. E icon showed up for a minutes
thank you
Yes you can use LG KS20 in USA!
I use the LG KS20 in USA with ATT in the 1900 Mhz Band.
Remember that ATT use both 1900 Mhz and 850 Mhz. This phone only use the 1900 Mhz with ATT and you need to check the coverage in your city with this Band but at least in my city is pretty good.
Also the GPRS connection is very good with this phone. I pay $15 each month for unlimited internet use (MediaNet).
With 3G is another history because use the 850 Mhz Band.
Will be a KS20 850 Mhz Version (with another name) coming to USA so I hope to use that firmware in mine and see if I can activate the 850 Mhz Band.
Good luck.
there were rumors about it coming to the US, but it seem more and more unprobable.
Gprs is not to bad, but it s frustrating sometime, when i see my Iphone, get everything quick
i got it thanks
wonder if we could use the LG incite firmware to make it work on att 3g?

ATT 3G settings with Topaz O2

Hello,
i've got a Germany Topaz with an original O2 Rom (6.5), and am currently in New York. I've inserted an ATT sim card, and the topaz came up asking whether it should install the ATT settings, which it then did.
I'm able to get a connection fine, but only with Edge, not 3G. The whole greater Manhattan area is 3G covered, so i should be getting a faster connection.
I'm wondering whether there is something i need to do to activate 3G? Anyone have any ideas why i can't get a 3G connection?
thanks.
Doesn't O2 Germany use 900MHz UMTS, not 850MHz & 1900MHz as AT&T? So your Topaz is likely not an 850MHz (& 1900 MHz) UMTS model - will be able to use only GSM.
Ok, thanks for that. But i thought the Topaz has the same frequencies as the Germany Kaiser, and i used that 2 years ago in California, with ATT, and had 3G almost always. Strange.
You are aware that there is a variety of models/frequencies specific to local markets?
What is the model shown under the battery: eg TOPA110 T5362?
Then do a search for that model and compare with the (UMTS/HSDPA, not GSM) specs for AT&T Pure:
eg http://www.pcmag.com/article2/0,2817,2353835,00.asp

Problem with 3G Services with Orange in Dominican Republic

HI my name is David and I bought a T-mobile My Touch 3G and this is what happend, I got this phone because i like it so much i previously had the G1, i got this new one because it works on 3G HDSPA 900mhz network and that is the Network 3G range of Orange Dominicana but i just got the Edge symbol its connected to the internet but through Edge it got the little "E" how can i fix this problem to have the 3g up and running on my phone its there any software or radio or spl or anything that can fix this please I want to know this because i've tried everything and the 3G on the phone doesnt work yet.
Best Regards,
David Peniche
penichej said:
HI my name is David and I bought a T-mobile My Touch 3G and this is what happend, I got this phone because i like it so much i previously had the G1, i got this new one because it works on 3G HDSPA 900mhz network and that is the Network 3G range of Orange Dominicana but i just got the Edge symbol its connected to the internet but through Edge it got the little "E" how can i fix this problem to have the 3g up and running on my phone its there any software or radio or spl or anything that can fix this please I want to know this because i've tried everything and the 3G on the phone doesnt work yet.
Best Regards,
David Peniche
Click to expand...
Click to collapse
Have you checked in your settings? Is "always use 2G" unchecked?
ayush20m said:
Have you checked in your settings? Is "always use 2G" unchecked?
Click to expand...
Click to collapse
Yes i've tried everything on this phone and still not working, i uncheked the option "Always use 2G network" and still i got the same problem.
Was that phone meant to be used with Orange? If it was not it could be possible that it's the same thing as when you use a T-Mobile phone on at&t or vise versa; you can’t connect to 3G because both companies have different frequencies.
cmarti said:
Was that phone meant to be used with Orange? If it was not it could be possible that it's the same thing as when you use a T-Mobile phone on at&t or vise versa; you can’t connect to 3G because both companies have different frequencies.
Click to expand...
Click to collapse
OK I know that there's diference between those 2 companies T-Mobile and Orange Dominicana but the specification of the cellphone are:
General 2G Network GSM 850 / 900 / 1800 / 1900
3G Network HSDPA 900 / 1700 / 2100
and the network frequency that Orange has for 3G HSDPA is 900MHZ and the cell phone should be up and running with the 3G maybe the T-Mobile has another frequency about its 3G network but this cellphone supports also 900MHZ HSDPA that is my frequency here in DR., so there's nothing to fix this problem??
3G Orange Dominican Republic
only htc europe works with 3g orange Dominican republic
tmovile have dif 3g band
sry it will no work :-(

[Q] frequency on my GSM carier

hi guys
im from Israel..
i just got a new HTC aria device
i unlocked it with a code for any GSM carier for supported Israeli's network
now the phone is no longer under AT&T, it for Cellcom (an Israeli company)
the device support this:
HSPA/UMTS/(1900/850MHZ) GSM/GPRS/EDGE (Quad band 850/900/1800/1900MHZ)
Cellcom SIM CARD support this:
HSPA/UMTS/(2100MHZ) GSM/GPRS/EDGE (Quad band 850/900/1800/1900MHZ)
when i entered a regular sim which is for GSM only the device worked just fine..
but when i entered the USIM (the HSPDA's supported sim card - that suppose to support the GSM frequency as well) the device couldnt recognize any carier..
what should i need to do?
is there a way for changing the sim card frequency settings from the Android's settings?
do i have any possibilty for using HSPDA supported sim card without supported frequency in Israel?? because the device soesnt know the 2100MHZ HSPDA freq.
cause i thougt that device will handle this issue (works for calls) and will block me only when ill want to web through the Cellcom mobile in HSPDA
but still will let me to web through GSM witch is more slowly..
HeLPPPPP
i think you're out of luck unless you get the proper sim card for the proper frequencies.
Since Cellcom uses UMTS 2100, you would have been better off to buy an Asian or European phone. AT&T doesn't use the 2100 band and decided not to include it in this phone. You won't get 3G on that carrier.
According to Wikipedia, another provider - Pelephone - has some of its 3G service on the 850 band which would be supported by the Aria. But in any area that is served only by the 2100 band, your Aria will not get 3G.
No idea why one particular SIM isn't letting you onto their GSM network.

Categories

Resources