I'm rather new here, I need help with how to put ROM on my Samsung Fascinate from Verizon that has been put on Metro PCS I'm running 2.2.1 Froyo and have a baseband of EB01, I'm also fully rooted. Can anyone help me, #1 get a recovery, #2 flash a ROM onto my phone. It would be very appreciated. Thank you ahead of time for any help.
Sent from my SCH-I500 using Tapatalk
veladem said:
I'm rather new here, I need help with how to put ROM on my Samsung Fascinate from Verizon that has been put on Metro PCS I'm running 2.2.1 Froyo and have a baseband of EB01, I'm also fully rooted. Can anyone help me, #1 get a recovery, #2 flash a ROM onto my phone. It would be very appreciated. Thank you ahead of time for any help.
Sent from my SCH-I500 using Tapatalk
Click to expand...
Click to collapse
My personal favorite froyo rom,
http://forum.xda-developers.com/fascinate-android-development/rom-ed01-5-25-11-evil-fascination-1035420/
Instructions and recovery are in the post, if you need any help post back or pm I'll check my phone when I'm at work in a bit. Also as a side note, have you gotten MMS to work? I got data up and running but MMS atm I can only receive and not send.
bro everything you need is here ! http://forum.xda-developers.com/fascinate-android-development/ i havent tried this personally but going to oneday
p.s i also have a fascinate fully flashed to metro i did the data and web my self !
@junkboy0 i have the same issur i think it is because my metro apn isnt sticking ! you think a custom rom would help .. ?
ghostv7142 said:
bro everything you need is here ! http://forum.xda-developers.com/fascinate-android-development/ i havent tried this personally but going to oneday
p.s i also have a fascinate fully flashed to metro i did the data and web my self !
@junkboy0 i have the same issur i think it is because my metro apn isnt sticking ! you think a custom rom would help .. ?
Click to expand...
Click to collapse
No I tried many different roms. Apn do stick because I can make it so I can't receive anything as far as mms.
Junkboy0 said:
No I tried many different roms. Apn do stick because I can make it so I can't receive anything as far as mms.
Click to expand...
Click to collapse
hmmm ok damn i guess ill stick to using gosms pro they have a mms client built in so you can send through there servers ? it only works for ppl who have full html browsing or some type of smart phone
ghostv7142 said:
hmmm ok damn i guess ill stick to using gosms pro they have a mms client built in so you can send through there servers ? it only works for ppl who have full html browsing or some type of smart phone
Click to expand...
Click to collapse
Yeah, I too used go sms but I would really like to get it working natively .
The EB01 is the only baseband that allows the settings to stick, I flash phones all day. I just haven't tried going from flashed to Custom ROM also, only PAID CDMAWS works. I've tried everything and finally just paid $100 a month for the software. Btw, ty for the ROM's I haven't looked yet, I've done CWM, but never voodoo. If you want my settings I'll gladly post them. Everything on my phone works, talk, text, data web, mms, and metro apps from the handmark site.
Sent from my SCH-I500 using Tapatalk
Both of the pages suggested come up as error 404 page not found.
Also even if your phone is fully flashed on the fassy, you must use either stock sms, or, a sms app that allows you to fill the mms settings.
I'll post the settings tomorrow, I'm very tired, long day at work.
Sent from my SCH-I500 using Tapatalk
That is extremely weird, as the url is correct........... Anyway just go to the android development section and look for evil fascinate rom thread. That has all the instructions you need.
Sent from my I500 using Tapatalk
Yeah, I'm on tapatalk and couldn't find that, manually searched and used search engine. Bed time, it's 2am...
Sent from my SCH-I500 using Tapatalk
Here's the correct link, im not sure what was wrong before since I just copied and pasted it. http://forum.xda-developers.com/showthread.php?t=1035420
veladem said:
The EB01 is the only baseband that allows the settings to stick, I flash phones all day. I just haven't tried going from flashed to Custom ROM also, only PAID CDMAWS works. I've tried everything and finally just paid $100 a month for the software. Btw, ty for the ROM's I haven't looked yet, I've done CWM, but never voodoo. If you want my settings I'll gladly post them. Everything on my phone works, talk, text, data web, mms, and metro apps from the handmark site.
Sent from my SCH-I500 using Tapatalk
Click to expand...
Click to collapse
yea can you post them please maybe we can make a tut for this complete flash
Anyone on, I was going to ask, has anyone tried kernel manager. Will this get rid of my metro flash? I found a PBJ Kernel that looks good, anyone want to test on there flashed phone? Also, to use kernel manager all I need is root correct? Will post the settings in a bit, thank you.
Sent from my SCH-I500 using Tapatalk
Name: MetroMMS
APN: Verizon
User:[email protected]
Pass:vzw (in some cases it's numeric and not vzw, not usually though.)
Server:*
MMSC:http://mms.metropcs.net:3128/mmsc
MCC:310
MNC:012 (Sometimes just 10 depending on what app your using.)
Type:*
I will post the rest soon, keep in mind for the rest, you NEED CDMAWS FULL hasn't ever worked for me any other way.
Sent from my SCH-I500 using Tapatalk
veladem said:
Anyone on, I was going to ask, has anyone tried kernel manager. Will this get rid of my metro flash? I found a PBJ Kernel that looks good, anyone want to test on there flashed phone? Also, to use kernel manager all I need is root correct? Will post the settings in a bit, thank you.
Sent from my SCH-I500 using Tapatalk
Click to expand...
Click to collapse
IDK about kernel manager specifically but it shouldn't affect the flash I flashed the PBJ -50 and -100 kernels all the time when I was on EF, I believe EF 3.6 comes stock with the PBJ -50 kernel from imnuts.
veladem said:
Name: MetroMMS
APN: Verizon
User:[email protected]
Pass:vzw (in some cases it's numeric and not vzw, not usually though.)
Server:*
MMSC:http://mms.metropcs.net:3128/mmsc
MCC:310
MNC:012 (Sometimes just 10 depending on what app your using.)
Type:*
I will post the rest soon, keep in mind for the rest, you NEED CDMAWS FULL hasn't ever worked for me any other way.
Sent from my SCH-I500 using Tapatalk
Click to expand...
Click to collapse
Why would [email protected] work? On my APN I have set as [email protected] but aside from that and password, the mcc mnc and mmsc are the same.
So if I flash a kernel it shouldn't, theoretically, mess with my Metro PCS radio flash?
Sent from my SCH-I500 using Tapatalk
veladem said:
So if I flash a kernel it shouldn't, theoretically, mess with my Metro PCS radio flash?
Sent from my SCH-I500 using Tapatalk
Click to expand...
Click to collapse
Again I flashed kernels time and time again, never once did it mess with the actual flash. Just in the last week I have flashed the kernel about 9 times moving from roms. So no, but again I never user kenel manager always either Odin or CWM. I work grave so I'm about to go to bed but I'll check the thread when I wake up and thanks for the settings in advanced.
Wait, it says I'll go from cwm, to voodoo, I know nothing about voodoo. Will this ROM work on EB01?
Sent from my SCH-I500 using Tapatalk
Actually, if I go to this and get voodoo, how can I get back to cwm if necessary?
Sent from my SCH-I500 using Tapatalk
I'm on AOKP build31
Nyan colonel v4
And when I type in *#*#3282#*#*
And I go enter my MSL it comes up with l
And then when I go to view/others/multimedia
It goes with this,
How is this happening!?!?
**************NOTICE**************
computer is having issues and wont upload photos. will TRY to update over the weekend.
image fail. i get 2 little black boxes.
austin420 said:
image fail. i get 2 little black boxes.
Click to expand...
Click to collapse
I'm with this guy..
There is a different dialer code for this on TW ROMs. If I remember correctly it was ##3282#. It is on the Wiki Page but my 3G is screwed right now.
Sent from My Phone with An App.
Edit: Ditto on the boxes.
I've read that MSL doesn't work or read correctly on AOKP so that's probably why you end up with whatever the 2 black boxes represent lol.
Sent from my SPH-D700 using XDA
I think those "menus" don't work with ics YET....so what I would do is just odin back to stock then use the "secrert menu" (I think that's what its called). Then go back to custom rom. There is a zip file floating around that "temporarly" puts the phone into stock...then reboots right back to your custom rom. Gotta READ.READ. and READ.lol.
Sent from my SPH-D700 using xda premium
pacoz said:
I think those "menus" don't work with ics YET....so what I would do is just odin back to stock then use the "secrert menu" (I think that's what its called). Then go back to custom rom. There is a zip file floating around that "temporarly" puts the phone into stock...then reboots right back to your custom rom. Gotta READ.READ. and READ.lol.
Sent from my SPH-D700 using xda premium
Click to expand...
Click to collapse
I did it that way by booting the FC09 stock. But thanks for helping
Hello XDA Developers,
I was trying to install a custom ROM on my Galaxy S4 deivce (SPH-L720). I successfully flashed the ROM through CWM. I installed the Google Edition ROM that was somewhere in the forums under Android Development.
But after reading the thread, it seemed that many people were have success with a kernel known as "AGAT".
After about 4-5 minutes of using the ROM, my signal and LTE went away, so I decided to flash that kernel as well. However, now I don't get any signal on any ROM. I flashed the stock kernel through Odin (I was trying to see if that would work), but no luck yet.
Any advice or tips?\
===================================================
UPDATE:
I restored it to the stock firmware and used TriangleAway. I took it to the Sprint store and the guy fixed it up for me in about 30 seconds.
Ya he probably just updated the prl and profile.
Sent from my Sprint Galaxy S4 using Tapatalk 2
Re activation
Sent from my SPH-L720 using Tapatalk 4 Beta
miketucky350 said:
Re activation
Sent from my SPH-L720 using Tapatalk 4 Beta
Click to expand...
Click to collapse
yup re activation was only way sprint tech over phone could fix it, if you know the dial code you can try it yourself...I also tryd the google edition rom with custom kernel which is what caused all this network lost, not even my stock rom nandroid back up could help me
Edit: heres the dial code for reactivation youl get data working again##72786#
Sent from my SPH-L720 using xda app-developers app
gotablunt said:
yup re activation was only way sprint tech over phone could fix it, if you know the dial code you can try it yourself...I also tryd the google edition rom with custom kernel which is what caused all this network lost, not even my stock rom nandroid back up could help me
Click to expand...
Click to collapse
Do you know how to install the AGAT kernel? I really want Google Edition, but I will wait if I have too.
You have to install the kernel right after flashing the rom...then wipe dalvik/cache and fix permissions. Worked great for me..
Sent from my SPH-L720 using xda premium
Does it matter whether it is on my sd card or if the kernel is located in my internal storage?
Sent from my SPH-L720 using xda premium
It doesnt matter
Sent from my SPH-L720 using XDA Premium HD app
question
gotablunt said:
yup re activation was only way sprint tech over phone could fix it, if you know the dial code you can try it yourself...I also tryd the google edition rom with custom kernel which is what caused all this network lost, not even my stock rom nandroid back up could help me
Edit: heres the dial code for reactivation youl get data working again##72786#
Sent from my SPH-L720 using xda app-developers app
Click to expand...
Click to collapse
hi, this same thing happened to me and I've gone to 3 different sprint stores and none of them knew what I was talking about. my question is, how do you use the dial code you mentioned if the phone has no network connection? I've tried to go back and flash different rom's but nothing has worked. I'm using TWRP, AGAT 4.0, and the stable google rom. any help would be appreciated, I'm currently without a phone.
secretredfoxx said:
hi, this same thing happened to me and I've gone to 3 different sprint stores and none of them knew what I was talking about. my question is, how do you use the dial code you mentioned if the phone has no network connection? I've tried to go back and flash different rom's but nothing has worked. I'm using TWRP, AGAT 4.0, and the stable google rom. any help would be appreciated, I'm currently without a phone.
Click to expand...
Click to collapse
You're not *actually* calling anyone. It's sort of like command prompt for your PC. But instead of command prompt you use the dial pad It WILL work and it takes less than 30 seconds.
secretredfoxx said:
hi, this same thing happened to me and I've gone to 3 different sprint stores and none of them knew what I was talking about. my question is, how do you use the dial code you mentioned if the phone has no network connection? I've tried to go back and flash different rom's but nothing has worked. I'm using TWRP, AGAT 4.0, and the stable google rom. any help would be appreciated, I'm currently without a phone.
Click to expand...
Click to collapse
Try and dial ##72786#
I believe that's the dial code.
Sent from my SPH-L720
Hi guys I've had a on going issue that I though I would give another try at fixing.
I have unlocked my phone and am using a UK Vodafone sim and everything works fine when I use the stock rom
If I use an AOSP (I currently have slimbean build 2 installed) I am able to receive SMS but not send. I get the error "sending failed"
I have enable GSM using Xshortcut
I used HiAPN to get the APN
I'm using the MF9 baseband after downgrading then re-updating to get the unlock.
I have 3G internet.
Would it be possible to export the settings used in stock for SMS and port them to the AOSP rom?
I have tried using chopsms to fix the problem but that didnt work
I'm really out of ideas
All I need is to be able to send an SMS on Vodafone UK
Sorry for also posting this in the apps section as well. I cant see how I can delete it
fingers crossed
Thanks
Jamie
I ran into a similar problem when I used an aokp rom, check out my thread on the domestic unlock and look for nicotheandroidguy 's suggestions for aosp/aokp. I ended up just running sacs rom instead of slimbean
Also are you setting it back to gsm/umts AFTER you install slimbean? I found whenever I did a wipe and install I had to tinker again, reset to gsm, reinstall hiapn etc.
Sent from my SPH-L720 using XDA Premium 4 mobile app
I'm testing out sacs now. Seems interesting even though its based on stock. I do all the tinkering after in install slimbean but no joy
imbmiller said:
I ran into a similar problem when I used an aokp rom, check out my thread on the domestic unlock and look for nicotheandroidguy 's suggestions for aosp/aokp. I ended up just running sacs rom instead of slimbean
Also are you setting it back to gsm/umts AFTER you install slimbean? I found whenever I did a wipe and install I had to tinker again, reset to gsm, reinstall hiapn etc.
Sent from my SPH-L720 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
A friend gives me their number I text say hey they get it... every message I send after they don't receive... they text me I get them just fine... called vzw they say everything should be fine with my account...so... I'm on stock .3 deoxded debloated I've also tried latest version deoxded debloated...I've done 3x full wipes before flashing using twrp 2.3.6.. I've tried the old and the new radio... when I turn on 'delivery report' in stock messaging settings the messages sit at pending... the recipient in another county on an iPhone using at&t.. i do not use third party messaging apps...please note that I do not have access to a PC in any way, all I have are smart phones so I can not rsd... I thank you kindly for your time and any suggestions you may have...
Sent from my XT907 using xda app-developers app
ezknives said:
A friend gives me their number I text say hey they get it... every message I send after they don't receive... they text me I get them just fine... called vzw they say everything should be fine with my account...so... I'm on stock .3 deoxded debloated I've also tried latest version deoxded debloated...I've done 3x full wipes before flashing using twrp 2.3.6.. I've tried the old and the new radio... when I turn on 'delivery report' in stock messaging settings the messages sit at pending... the recipient in another county on an iPhone usinHandsent i do not use third party messaging apps...please note that I do not have access to a PC in any way, all I have are smart phones so I can not rsd... I thank you kindly for your time and any suggestions you may have...
Sent from my XT907 using xda app-developers app
Click to expand...
Click to collapse
I would try Handsent. It has worked for me when stock Telstra would not.
Get 263 e33 twrp?
Try fix permissions in rom mgr?
Ok .. I'll give that a shot... I used to use it on my d4 n forgot all about it...
I'll flash the E33 I'm on the m44 now and I'll fix permissions as well... Thank you for your time...
Sent from my XT907 using xda app-developers app
still not able to send my messages to them... Flashed the E33..full wipes before flashing the old and new ota's full wipes flashed ota's then radios... Fix permissions... Its on my end ...has to be an issue with Verizon but their resolution is a replacement device and I'm not giving up my unlocked bootloader...I guess I'll have them send it out to see if its my device then send it back... In the event it is my phone I'll have to get a friend to sneak me a laptop to RSD (yes I have to sneak, the wife won't let me on a PC)
Sent from my XT907 using xda app-developers app