Related
Hi guys,
with this tool you can switch between 'volume on' and 'vibrate' by shaking your phone
Just run it and click on 'Hide', so that it always run in background.
Please test it and tell me if the sensivity is ok and if it's not drain your battery to much.
Please donate for me! I'm a student and I spend all my free time for developing tools for you!
A cup of coffee for me
Received donations
6.00 EUR: Daniel O
4.00 EUR: Arne V
10.00 EUR: Mahmoud K
Thank you very much!
Changelog
Version 0.2 (07/11/08 14:10 pm)
Vibration feedback (1x long: vibration mode on, 2x short volume on)
A lot of settings for parameters. Just play around with them, because it's difficult to explain them.
At the moment settings will be lost, after closing my app.
application icon added
Version 0.1 (07/09/08 18:50 pm)
first release
Best regards,
Sascha
Sounds nice!
But how "hard" do you have to shuffle? I mean can it happen accidentially for example by running with the phone in your pocket?
horstborsch said:
Sounds nice!
But how "hard" do you have to shuffle? I mean can it happen accidentially for example by running with the phone in your pocket?
Click to expand...
Click to collapse
That's why it takes so long until i published this app.
I coded it so, that nothing can happend! Only if you shuffle the device, it change to vibrate or back to volume on.
I think it is not possible, that this happens, when you having your phone in your pocket ..... ok i don't know what you are doing the whole day...maybe it is possible
COOL!
Not to be ungrateful...but would it be possible to write something similar that will put an alarm into "Snooze" mode?
eg...Alarm goes off and instead of me having to navigate through the menu's to stop or snooze, I would just shake it?
i'd like to have a function by shuffling the diamond, that the screen goes on or off...
well done!
But is there any notification if you shake it that the status change is preformed?
So if you do it with the screen switched off you need a feedback if it was sucessfull. Maybe one beep for vibrate and two beeps for volume on?
daren1 said:
COOL!
Not to be ungrateful...but would it be possible to write something similar that will put an alarm into "Snooze" mode?
Click to expand...
Click to collapse
That sounds cool! I'll figure out that.
horstborsch said:
well done!
But is there any notification if you shake it that the status change is preformed?
So if you do it with the screen switched off you need a feedback if it was sucessfull. Maybe one beep for vibrate and two beeps for volume on?
Click to expand...
Click to collapse
It doesn't work, when the device is in standby!
If the device is on, you see it in title bar.
But i could also add a vibration feedback when switching.
Nice trick !
I will have a look at this...
Thanks !
@sushi : did you use the Gsensor API for that ?
its perfect!
@MonteCristoffOn:
I figured it out by myself, how to use the gsensor.
But at the end it was easier and faster to use the finished api, which was published a few days ago.
Works great so far!! But one question: Would it be possible to start the app completely in the background like a service? Thanks alot for your work!!
cheers
neoTheone said:
Works great so far!! But one question: Would it be possible to start the app completely in the background like a service? Thanks alot for your work!!
cheers
Click to expand...
Click to collapse
Yes, that's what i want to do in one of the next versions.
very sweet indeed!! I would also vote for a short vibration feedback after switching and customized actions to perform.. Thank you
After testing, i figured out, that my app works when the phone is in standby. First i said, that it won't...
In next release i give you the possibilty to change parameters, so that we can find the optimal settings.
neoTheone said:
very sweet indeed!! I would also vote for a short vibration feedback after switching and customized actions to perform.. Thank you
Click to expand...
Click to collapse
Works great on the TLR V2 Rom
Would also love to have a little vibrate when the profile is switched.
Thanks for the cool app
thank you again, i don't know if the "cup of coffee" link is there because of my suggestion (from the thflo3d thread) or it was already there but i think i did good use of it.
not enough for a mercedes or a new girl friend but sure enough for at least a "six pack"
thank you!
KukurikU said:
not enough for a new girl friend
Click to expand...
Click to collapse
What a shame! I need a new girl friend so much
But, thank you very much!
sushilange said:
In next release i give you the possibilty to change parameters, so that we can find the optimal settings.
Click to expand...
Click to collapse
Yes please provider a slider or something to be able to set the sensitivity by ourselves..... cuz sometimes when I shake it, it changes... other times it doesn't But the intention of this program: I love it!
Working Great!!
Awesome App!
i agree with other comments about the below....
As mentioned, a small vibrate or noise ( maybe make a noise when switch to loud, and vibrate it when switch to vibrate ??)
The shake to "wake up" the fone sounds awesome.
also shake to snooze or turn off the alarm.
Also things such as turning the phone over would work well with the alarm functions, and turning off the alarm
How about turn phone over to snooze alarm... shake it to stop alarm ???
Hi to all diamond uses.
Just to let you know that a new (another one) lock app is on the air.
Thread started in the Blackstone software area.
Check it out!
LockMeLite HD-Diamond-Raphael
Keep watching the main thread in HD section.
Version 1.2 is released!
-Add user define background
-Keep unlock (LmL) while talking.
Thanks.
I hope you enjoy it. Its free after all
PS. After getting a message for a kind donation i include the button on the bottom.
PS1. Any donation, small or large, helps this project continues. Thanks again !
geoks100 said:
Hi to all diamond uses.
Just to let you know that a new (another one) lock app is on the air.
Thread started in the Blackstone software area.
Check it out!
LockMeLite HD-Diamond
Thanks.
Click to expand...
Click to collapse
Thanks for the wonderfull App, it works like a diamond
Finaly!!!! i found my lock app!!!
Thank your very very much!
I've found my lock app too.
great job on this.
is there any way to change the time format to 12hr?
kbw said:
I've found my lock app too.
great job on this.
is there any way to change the time format to 12hr?
Click to expand...
Click to collapse
Maybe later if people really like it and the project continues it could be
a user setting environment
Work great, just one thing : could be great if the app auto unlock when the phone receive a call (coz the diamond have a nice "slide to answer") and re-lock after the call...
Yodajr said:
Work great, just one thing : could be great if the app auto unlock when the phone receive a call (coz the diamond have a nice "slide to answer") and re-lock after the call...
Click to expand...
Click to collapse
...but the main idea is to prevent users from pressing accidentally the answer/ignore button when an incoming call arrived!
Anyway various ideas comes in mind for new versions
Yes, I know, but it is also very usefull for *just* lock the phone : I play a game, I read my mail, or anything, then I just turn off the phone and *hop* it's locked.
I don't worry if a reminder occur, if the on/off button is push accidentaly, or anything else, because I know that the phone is lock until I do a 45% vertical slide
And cherry on the cake, when I ask myself "what time is it ?", I just have to push a button (otherwise, I need to back to home screen with TF3D)
So if you plan to add a user config system to your app, please put a little "manage incomming call ?" box
getting better and better. after a few days i got unsatisfied with all the oter lock apps. but this is killer.
ps. is there a way to auto unlock for incoming calls? in most of the roms there is the phone canvas slider. that would do the job in that case, too.
BuzzingFreak said:
is there a way to auto unlock for incoming calls?
Click to expand...
Click to collapse
Yeah, at leat 2 pp want it
doesn´t work on my touch pro. i execute the lockmelite.exe but nothing happens.
what did i wrong
Yodajr said:
Yeah, at leat 2 pp want it
Click to expand...
Click to collapse
Make that 3 allready!
Some user-preferences would be very nice! Just installed, but love the app allready!
djkasmic said:
doesn´t work on my touch pro. i execute the lockmelite.exe but nothing happens.
what did i wrong
Click to expand...
Click to collapse
Can't see a reason why...
Have you install the .NET Compact Framework 3.5 ?
Try a soft reset and execute it again!
i reinstalled netcf and now it works great. thanks.
installed it, runs very nice but unfortunately it makes the reminder and the alarm unusuable when an alarm comes up, the lock screen appears like it should. when you unlock, the message of the alarm or reminder is gone and you have to tap on the top-line icon to get it back also the funktion to let the alarms sound even in vibrate or silence mode won't work no mor... the device only vibrates.....
malsehn said:
installed it, runs very nice but unfortunately it makes the reminder and the alarm unusuable when an alarm comes up, the lock screen appears like it should. when you unlock, the message of the alarm or reminder is gone and you have to tap on the top-line icon to get it back also the funktion to let the alarms sound even in vibrate or silence mode won't work no mor... the device only vibrates.....
Click to expand...
Click to collapse
The last part has nothing to do with the LmL. Maybe some other setting to try ?!?
This is simply fantastic.
I too would like to be able to answer the phone without unlocking it. I would be quite happy with just using the hardware keys on the Diamond which seem to be locked for an incoming call.
Personally, I dont need or want other options - its simplicity is perfect. Something small and light.
perhaps its possible to implement the ability to assign some exceptions for lockmelite, i.e. that it should not lock normal homescreen (when you turn on the device consciously you don't need to have it locked i guess) or even for an upcoming alarm... THEN it really would be a perfect app!
New Release
version 1.2 released!
Enjoy
Hey man, great job!!! I love it
Now we just need an autostart function, hehe
Hello!
GSuspend simple tool which put device to suspend (standby) mode when HTC Diamand is facedown.
To unload start it again.
To install , just extract folder to Program Files, and copy .lnk to Windows\Start Menu\Programs.
After new ROM has issued, GSEN stop worked stabily, and i started to search my favourity ability of gsen - facedown suspend. But i can't find replacement of GSEN in this ability.
Finally fight win my desire against my laziness and done this application.
In the base of this app was SensorLock thanks surfsmurf.
I hope somebody also find it usefull.
Thanks
P.S. Improved power management.
Still looking sample to catch event of incoming call, if somebody can share C++
Tnx, I'll try it right now!
[EDIT] Works perfect! Very small and light application btw.
One thing I noticed; my phone is not locked with PocketShield after turning back on.
Thanks
roma_pop said:
Hello!
GSuspend simple tool which put device to suspend (standby) mode when HTC Diamand is facedown.
After new ROM has issued, GSEN stop worked stabily, and i started to search my favourity ability of gsen - facedown suspend. But i can't find replacement of GSEN in this ability.
Finally fight win my desire against my laziness and done this application.
In the base of this app was SensorLock thanks surfsmurf.
I hope somebody also find it usefull.
Thanks
Click to expand...
Click to collapse
Thank you for what must've cost you time & valued effort.
Is it possible for you to modify this in a way that it would automatically Silence the device when facedown, and back to normal volume settings on all other positions? I find it VERY useful to have that -instead of having to turn it face up & down everytime a call comes in". Everybody else apparently misses the point that a phone vibrating on wooden desks is just as terribley impolite as having it spitting jams left & right.
Do consider it...
changeScreen has a feature built into it that can suspend the phone when it's flipped face down
ruskiyab said:
changeScreen has a feature built into it that can suspend the phone when it's flipped face down
Click to expand...
Click to collapse
I didn't need any others functionality, so i've made for my desires.
roma_pop said:
I didn't need any others functionality, so i've made for my desires.
Click to expand...
Click to collapse
thats exactly what I want
but I think "upside down" or "Portrait 180" is more reliable for this job
and a small vibrate in the hand to confirm the suspend is good too
1KB MEM . . . thats awesome
thanks,
Sorry , i noticed battery drain, will work on that , sorry
is this app only turn off scren on face down or it is suspend device, because changescreen only tunr off screen??
"upside down" or "Portrait 180" excellent idea
but i dont need vibrate(i hate it)
I'm a little confused now . I'm reading about an app that turns the device on silent when faced down. This is what I'm looking for, so I can easily mute during a meeting. Vibrate on 'siwtch' is also perfectly. But my confusion is: which app do I need (or doe'sn't it exist for now )
watikjebrom said:
I'm a little confused now . I'm reading about an app that turns the device on silent when faced down. This is what I'm looking for, so I can easily mute during a meeting. Vibrate on 'siwtch' is also perfectly. But my confusion is: which app do I need (or doe'sn't it exist for now )
Click to expand...
Click to collapse
If you receive a call during a meeting, the function to turn your phone face-down to mute the call is already build in. (maybe you have to activate it using Advanced Configuration)
GSuspend it a tool to put your device in standby on face-down.
johanromijn said:
If you receive a call during a meeting, the function to turn your phone face-down to mute the call is already build in. (maybe you have to activate it using Advanced Configuration)
GSuspend it a tool to put your device in standby on face-down.
Click to expand...
Click to collapse
TouchLockPro can do the same (configurable), is also small and is at the same time a lock/unlock program. Beside the GSensor, it also can couple commands to capacitive swipes, e.g. to suspend the device.
johanromijn said:
If you receive a call during a meeting, the function to turn your phone face-down to mute the call is already build in. (maybe you have to activate it using Advanced Configuration)
GSuspend it a tool to put your device in standby on face-down.
Click to expand...
Click to collapse
The 'turn-to-mute' function is working oké, but what I'm looking for is an app that turns my device on 'silent' when my device ís faceddown and 'normal' faced-up. So when I'm in a meeting I don't have to switch profile or flip my phone
watikjebrom said:
The 'turn-to-mute' function is working oké, but what I'm looking for is an app that turns my device on 'silent' when my device ís faceddown and 'normal' faced-up. So when I'm in a meeting I don't have to switch profile or flip my phone
Click to expand...
Click to collapse
Right on, +1 here. In meetings, if you're unprepared, you'd have to flip over & over & over, etc..., everytime you get a call. It gets irritating until you actually start pushing buttons and adjusting it manually...
If you have that meeting scheduled in your calendar, you could try G-Profile for example.
Based on your calendar, G-Profile can adjust your notification settings.
shirreer said:
Right on, +1 here. In meetings, if you're unprepared, you'd have to flip over & over & over, etc..., everytime you get a call. It gets irritating until you actually start pushing buttons and adjusting it manually...
Click to expand...
Click to collapse
Probably i can release app that kind, but still looking for solution to reduce power consumption. Otherwise this all are useless.
Any ideas, how to correctly snooze program appreciated and really helps me.
Sry i'm not a proffesional designer, don't ask from me too much pls.
Thanks
shirreer said:
Right on, +1 here. In meetings, if you're unprepared, you'd have to flip over & over & over, etc..., everytime you get a call. It gets irritating until you actually start pushing buttons and adjusting it manually...
Click to expand...
Click to collapse
That's exactly what I mean. I don't use the build-in calender so G-Profile won't work for me
watikjebrom said:
I'm a little confused now . I'm reading about an app that turns the device on silent when faced down. This is what I'm looking for, so I can easily mute during a meeting. Vibrate on 'siwtch' is also perfectly. But my confusion is: which app do I need (or doe'sn't it exist for now )
Click to expand...
Click to collapse
hi,
Have you try with this soft : MobilMagic
very powerfull and customized tool, it can do what you want.... but don't know if it drain battery a lot or not.
GSuspend is very cool, simple and do exactly what i want but, when i switch on the screen, it switch off again (only 1 time but....) i don't know why, need to switch on 2 times.
V.
I kind of hate that this is my first post - A little pedestrian - I've been a longtime lurker and thanks to a lot of this forum, I made the jump yesterday to a rooted MyTouch 3G with Cyanogen's latest. I'm pleased.
Coming from a BlackBerry, I've been spoiled by the easy-switch between "profiles", specifically the ability to set the device to only ring for calls and not for SMS or other notifications.
I'm finding a one-touch solution difficult to come by - And I've already tried "Profiles", "Auto Ring", "Toggle Settings" and "Ring Toggle" - Each of them is either a multi-step process to get to "just ring for calls" or won't turn off SMS vibration, a common issue?
Anyway, great community here and I hope to be a small part. If anyone knows a simple, reliable way to set my phone to just ring (for nighttime important calls) and silent everything else (except alarms) - Please let me know!
Thanks!
kidblue said:
I kind of hate that this is my first post - A little pedestrian - I've been a longtime lurker and thanks to a lot of this forum, I made the jump yesterday to a rooted MyTouch 3G with Cyanogen's latest. I'm pleased.
Coming from a BlackBerry, I've been spoiled by the easy-switch between "profiles", specifically the ability to set the device to only ring for calls and not for SMS or other notifications.
I'm finding a one-touch solution difficult to come by - And I've already tried "Profiles", "Auto Ring", "Toggle Settings" and "Ring Toggle" - Each of them is either a multi-step process to get to "just ring for calls" or won't turn off SMS vibration, a common issue?
Anyway, great community here and I hope to be a small part. If anyone knows a simple, reliable way to set my phone to just ring (for nighttime important calls) and silent everything else (except alarms) - Please let me know!
Thanks!
Click to expand...
Click to collapse
Um have you tried going into settings, sound/display -> ringer volume? You can check a box and mute your notification sounds. Personally, I find this really easy already but if you must have that one-touch then.. I don't know
KAwAtA said:
Um have you tried going into settings, sound/display -> ringer volume? You can check a box and mute your notification sounds. Personally, I find this really easy already but if you must have that one-touch then.. I don't know
Click to expand...
Click to collapse
It isn't a deal-breaker or anything, but even with a shortcut to "Sound & display", it's a few extra swipes and pokes
I was hoping there was a shortcut directly to that screen or just a simple on-screen button that could turn everything but alarms and calls off.
Thanks
KAwAtA said:
Um have you tried going into settings, sound/display -> ringer volume? You can check a box and mute your notification sounds. Personally, I find this really easy already but if you must have that one-touch then.. I don't know
Click to expand...
Click to collapse
...could it be this easy? i am a doof. had my magic since august and never once thought to uncheck "use incoming call volume for notifications".
lpasq said:
...could it be this easy? i am a doof. had my magic since august and never once thought to uncheck "use incoming call volume for notifications".
Click to expand...
Click to collapse
Yes sir! That's what we want - But how do we get that screen as a shortcut or widget on our home-screen?
kidblue said:
Yes sir! That's what we want - But how do we get that screen as a shortcut or widget on our home-screen?
Click to expand...
Click to collapse
i think that if it were developed it would need to also toggle the "vibrate on" selection within each notification setting for the various apps that utilize notifications. like gmail app, email app, exchange app, messaging apps, sms/mms etc. it is currently an android weakness compared to winblow and dingleberry but the other strengths of the os outweigh this and a few other features' immaturity. try the market...
well as of right now I can offer you one thing that requires 3 clicks lol
use a shortcut widget! But that is almost as long as doing it normally... lol
although there may be a way using better cut (trying to figure that out)
yeahhh I don't know what else you can do ;p
I give up looking for it. I tried using better cut / any cut and tried the "make your own shortcut"
Apparently there is an intent to adjust the volume but.. I don't know what to put in the "data" field. Searched around and not many people know how to use this feature either haha
KAwAtA said:
well as of right now I can offer you one thing that requires 3 clicks lol
use a shortcut widget! But that is almost as long as doing it normally... lol
Click to expand...
Click to collapse
...point about "vibrate on" is that you'd need a shortcut (as you say) for each app if, like me, you activate "vibrate on" as part of the notification profile for each of the app examples i listed above. in other words, simply silencing notifications volume from settings/ringer_volume/use_incoming_call_volume_for_notifications has no effect on the "vibrate on/off" selection profile for the individual apps.
It seems like the whole "SMS vibrations are different" deal is what really makes this a difficult implementation - Every application I've tried has difficulty specifically with silencing SMS vibrations that are turned on - Otherwise, it's totally possible - Very, very strange that this is still an issue...
It seems like the whole "SMS vibrations are different" deal is what really makes this a difficult implementation - Every application I've tried has difficulty specifically with silencing SMS vibrations that are turned on - Otherwise, it's totally possible - Very, very strange that this is still an issue...
If it works for increasing volume...is there any way to make the device vibrate when in the pocket or in dark only?
Some weeks ago i saw application in the Android market, But dont remember name. Sorry.
I need it for windows mobile...forgot to mention...thanks anyway...
This is not a solution, but I would suggest you contact the developer of the AutoLoudSpeaker, as it looks like a modification of his program would be a solution.
* HERE *
Thanks.
I've just posted question about my problem in the given thread.
This is a good idea & along with a hack for pulsing vibrate would be very very useful as constant vibrate is close to useless.
Mister B said:
This is a good idea & along with a hack for pulsing vibrate would be very very useful as constant vibrate is close to useless.
Click to expand...
Click to collapse
I already use this application for vibrating pattern and seems like you need it too...
http://forum.xda-developers.com/showthread.php?t=569025
You can set your own vibrating pattern so it doesnt constantly vibrate like an earthquake...
Before I found this application I had vibration disabled just because the constant and too powerful vibrating...
For some reason it doesnt work for SMS for me...maybe I am forgetting something...
Bence said:
I already use this application for vibrating pattern and seems like you need it too...
http://forum.xda-developers.com/showthread.php?t=569025
You can set your own vibrating pattern so it doesnt constantly vibrate like an earthquake...
Before I found this application I had vibration disabled just because the constant and too powerful vibrating...
For some reason it doesnt work for SMS for me...maybe I am forgetting something...
Click to expand...
Click to collapse
Used that on my Touch Pro, found it too buggy ...
Mister B said:
Used that on my Touch Pro, found it too buggy ...
Click to expand...
Click to collapse
The only problem I had is that I cant make the sms vibration to work...I am more than satisfied with incoming calls...
Kind of the problem I had, calls were ok but all else failed & it was not controllable via standard adjustment UIs or profile softwares so was not much use for my needs.