Related
This is my situation...
I recently rooted for my Wildfire using Unrevoked3, have no installed any custom roms whatsoever.
To install the new firmware (Update 1.25.405.1) i followed a guide which involved renaming it to update.zip and used clockmodrecovery to install update.zip from the SD card.
Update was successful however i lost the root (as expected)
I tried to rerun unrevoked 3 to reroot but all it does is reboot my device and it remains unrooted.
On the HBOOT recovery menu i now get a red triangle with an exclamation mark against a black background. i do power + volume up and it says android system recovery and in yellow 'E: Cant open/cache/recovery command'
How can i reroot my phone so i can use apps such as titanium backup once again? (and yes ive tried to install busybox and i get a failed error message)
I have looked around the forums and made lots of searches some of which address this question but i am yet to find a solution which works... Im sorry if this question is redundant as i am new to this sorta thing.
Thanks.
Did you follow this guide?
Update: What I did to succesfully install the update on a rooted phone
- unplug phone from USB, let it download update (it's about 13 Mb in size)
- phone will ask to reboot -> update will fail, you will be dumped in clockworkmod
- As always, do a Nandroid backup before doing anything that might possibly render your phone unusable.
- Select update from zip/sdcard (or similar), navigate to zip in downloads folder
- the update process will start
- reboot (this can be a longer boot than usual, took 10 minutes on my phone)
- phone will notify you that the update has succeeded! If you've upgraded from your stock ROM (like I did), the phone info screen should look similar to that in the attached image.
- (reflash needed for root)
It doesn't say to rename the file though.
I'm going to do this now (im guessing youre on TM too?)
thanks for the info, i'm just about to do the same thing, after trying [ROM][04/10] WildPuzzleROM v8.0.5; until i realised there are still problems, got scared and restroed nandroid backup Couldn't get marketplace to load?
when phone reboots after downloading the update, i guess its supposed to be installed by the recovery program, but i have clockworkmod, I tried apply sdcard:update; get error back with failed to open update.zip and sig veri failed.
Not sure what to do? Will try booting normally, checking sd theres a file called 'OTA_Buzz_TMO_UK_1.25.110.1_R-1.14.110.1_R_release31o90ome6fwgje76.zip' on the sd card under download folder. will try renaming to update.zip and placing in \sdcard root folder
otherwise i'm thinking rom manager to install, but mobilism is down it seems and can't get hold of it
EDIT: Just rename the update put it in the \sdroot. Boot into recovery and install update.zip. works fine, takes ages, very scarey process.
Will try going back to puzzle when i have more time! Lets hope 1.25 don't crash as frequently!
Yes, i did follow all those instructions and it still didnt work. However i have managed to reroot my wildfire haha so problem is resolved. It was a stupid problem, after i rooted the first time, i reinstalled htc sync to sync some stuff but forgot to uninstall. After uninstalling it again i was able to reroot.
Sorry guys... very silly mistake by me.
I had to flash my a500 with the chinese rom to fix my bricked a500 alittlr whike back when acer pushed out that little update. How should I go about updating to 3.1? If I'm able to do ota updates I have not been givin the option to update 3.1. Any thoughts?
easy
Install cwm - head to the dev section for that - the YouTube video helped me a lot - after you install cwm flashing the official 3.1 is a breeze - make sure you follow the directions and clear all user data / cache / etc...
second to that.
I posted under the dev section but it was real easy.
all you need to do is d/l Acer Recovery Installer(?) from the market and put the 3.1 ROM into the external SD card and follow the instruction.
upon rebooting it might take little bit longer than usual but eventually you will see the lock screen.
thanks
Ill give that a try. Tonight I have finally used a guide hrrp://forum.xda-developers.com/showthread.php?t=1101859 (change rr to tt) to update to 1.141.07 hoping that would allow me to ota but i have tried it a few times and it has not worked.
Dear all,
I got a update notification today. I was so happy to see that.
I spent 20 mins on downloading this firm, but after the unzipping procedure,
it exit Andriod OS and reboot to a DOS-like system.
I saw a bee on the screen, there was a ProcessBar under this bee.
When the process went to around 20%, the process was failed and a "!" was shown up.
I installed Acer Recovery Installer on my tablet and I have Recovery on it as well.
Is it the reason why I cannot update my OS?
Help!!!!!
Easier way to get official OTA updates from acer is to be full stock :
- stock rom
- stock recovery / bootloader
Remember that updating to stock 3.2 will makes you lose root
franva said:
Dear all,
I got a update notification today. I was so happy to see that.
I spent 20 mins on downloading this firm, but after the unzipping procedure,
it exit Andriod OS and reboot to a DOS-like system.
I saw a bee on the screen, there was a ProcessBar under this bee.
When the process went to around 20%, the process was failed and a "!" was shown up.
I installed Acer Recovery Installer on my tablet and I have Recovery on it as well.
Is it the reason why I cannot update my OS?
Help!!!!!
Click to expand...
Click to collapse
Must remove root and all mods and reflash stock recovery. Maybe not all, but that should work.
shaun298 said:
Must remove root and all mods and reflash stock recovery. Maybe not all, but that should work.
Click to expand...
Click to collapse
Are there instructions on how to do this?
Update 3.2 failed
Hello, I have the same problem, I can install the stock with CWM? if so, where can I download? the ROM?
(sorry for my bad english)
My device is Acer Iconia Tab A501
I am having quite a bit of problem updating my A500. After the update downloaded the first time, it gave me an error saying update is invalid. After that it is constantly trying to download. As soon as 357 MB is downloaded, instead of asking me whether to install now or later, it just goes ahead and tries to re-download all over again. As you know it takes some 20 mins to get the whole 357MB over wifi, so I went ahead and unchecked the automatic update checkbox in system update. Does anyone know where the downloaded file ends up? I could just try to run it from that location.
My system was rooted, but once I got the last ROM update (3.1), the tablet was unrooted and none of the rooted apps work anymore. So I don't think I should be having root related issues unlike some of you who are having problems. Any help is appreciated.
Fix for "Invalid Update" problem .....
Samaruf,
I suggest that you have a look at Post #4 in the following thread......
http://forum.xda-developers.com/showthread.php?p=18132338#post18132338
This thread appears to be focused on a different problem. The resolution to your problem is at the above thread. Good luck....
I need help! I need a stock, unmodified recovery partition image.
Anyone here with a vzw tab who DOES NOT yet have CWM installed?.
PLEASE contact me.
Thanks!
electron73 said:
I need help! I need a stock, unmodified recovery partition image.
Anyone here with a vzw tab who DOES NOT yet have CWM installed?.
PLEASE contact me.
Thanks!
Click to expand...
Click to collapse
I have one that hasn't been moded but have no idea how to get you what you want. PM me if you know how to download and send to you and I'll do my best to help.
I'll check my laptop at home tonight. I believe I kept my heimdall backup before flashing cwm
Sent from my DROID BIONIC using Tapatalk 2
Just checked, mightve deleted it. Sorry man
aximtreo said:
I have one that hasn't been moded but have no idea how to get you what you want. PM me if you know how to download and send to you and I'll do my best to help.
Click to expand...
Click to collapse
Oh that would be awesome! Are you rooted? Let me find the commands in the meantime, I read somewhere it's a simple one command in terminal to extract the recovery partition into a file on sd card...
WHAT AN ORDEAL !!!!
But in the end: SUCCESS!
I managed to get my tab updated with the Verizon OTA update.
The problem is definitely CWM !!! A rude awakening is in store for everyone with the P6800 CWM installed, because it a) fails to verify the checksum of OTA files correctly on the i815, b) it thinks the tablet is a P6800, so the OTA file fails to run if it assert checks for "SCH-i815" hardware AND lastly c) modem updates don't work because the device /dev/cdma_update doesn't exist, so the modem.bin firmware_update call fails !!!
In short, I had to fumble the OTA file apart and do the update manually in two runs:
First file, kick the checksum, hardware check and modem update out, then manually run the ZIP through CWM. The zip subsequently (LUCKILY) updated the stock recovery and overwrote CWM with a new fresh stock recovery.
Second file had everything kicked out BUT the modem udpate and LTE patch, so with the STOCK recovery this file ran through just fine, updated the modem and then applied the LTE delta patch.
Phew!!!
Of course I had to manually restore root after the update, had backed up with voodoo, auto restore failed, so terminal and hacking it was...
Now I have the tab running on clean stock FD01, baseband and LTE FD01, rooted and stock recovery.
No more CWM, no more "hacking" with the ROM until some dev finally releases a "correct" CWM and at least ANY factory ODIN image is available to bring the tab back to stock if needed!!!
Kinda sick of the non-support for this tab. So much going on for the Galaxy Note and pretty much every other device. I'm starting to regret having bought this "special" Verizon version
Awesome find and great to know for whenever ics does come out. Could you please post the recovery img you got?
Sent from my DROID BIONIC using Tapatalk 2
OK after getting so many responses I decided to just post everything here in hopes that it will help others, too:
All files are here:
http://www.mywo.org:88/XDA/sch-i815/index.php
Step by step procedure to update the Verizon Tab from ..FA02 to ..FD01 build IF YOU ARE stuck with CWM installed on your tab and the original OTA fails with errors:
Upload the SCH-I815_FA02c_To_FD01.1.zip to the INTERNAL(!) SD card. This is important because CWM contains a bug that will only allow you to install from ZIPs stored on the INTERNAL SD storage.
Upload the SCH-I815_FA02c_To_FD01.2.zip to the EXTERNAL(!) (micro SD) card. This is important, because after the factory recovery is restored, it will correctly (and only) look for ZIPs on the EXTERNAL card.
Best way just copy both files to both locations
Fire up CWM and do "install from ZIP" and select SCH-I815_FA02c_To_FD01.1.zip
It should run (takes a while) and eventually tell you all is done. BOOT the tab. It should boot fine but in system it will show the new Android build FD01 but the baseband (radio) will still be the "old" one.
Now press and hold power and vol up again until you see the default Samsung recovery menu. Choose install from ZIP and select SCH-I815_FA02c_To_FD01.2.zip. This will now upgrade the baseband only. When done, reboot and enjoy being back on the "factory upgrade path" with the tab.
I hope someone more savvy than me can "fix" CWM to work properly with VZW tabs (accept the checksum, not fail the check for "SCH-i815" and provide the correct /dev file links for radio upgrades). Until then, I recommend just leaving the tab as-is and not tinkering with the ROM. Not that there is any custom ROM available anyway :-(
I also pulled the NEW factory recovery image FD01_recovery.img with the following command:
dd if=/dev/block/mmcblk0p6 of=/sdcard/FD01_recovery.img bs=4096
So in case anyone with a botched recovery wants to restore factory (Samsung 3e) recovery. This was actually the reason I had to go through all this... There is NO factory recovery image ANYWHERE to be found. I can't believe that I should be the first one ever to post one?? Anyway, hope it will help
I'm still quite new here, so I do really appreciate every click on that "thanks" button
P.S. for tinkerers and devs I also uploaded the original, untouched OTA file (0559c0e4e08e.update_SCH-I815_FA02c_To_FD01.bin) as it came from Samsung or Verizon or whatever and ended up in the /cache partition.
THANK YOU!
Electron,
You sir, are a BOSS! Thank you so very much for doing the work, and sharing it. You just made things one hell of a lot easier on me, and anyone else that follows.
Regards,
-Rob
Also want to say thanks. You rock, dude. I wouldn't have known how to revert **** on my own.
Also, I feel like we need a sticky or something for sch-i815 owners to go to for device specific stuffs, especially since there is little knowledge/info out for this device.
Sent from my Galaxy Nexus using xda premium
hmm i only ever installed ROM manager ... but i did root it ... problem is ... now i don't have a CWM recovery to flash the file ... any ideas?
phigmeta said:
hmm i only ever installed ROM manager ... but i did root it ... problem is ... now i don't have a CWM recovery to flash the file ... any ideas?
Click to expand...
Click to collapse
You're in luck! You don't need to go through the whole ordeal because you do NOT have CWM! You can just update the regular intended way. Go into settings, about phone and then click check for system updates. If it presents you the OTA update, just do it the regular way.
My complicated "hack" is only necessary if you DO HAVE CWM installed.
Im sorry I did not explain well what my issue is.
I do not have CWM installed, however i did delete a few appilcations using titanium backup. This causes updates to not take. I would really like to just take it back to factory and start over (this time with less stupidity on my part)
I of course would assume that once its at factory i can then install updates again.
Right now when i try i get the "!" droid sign and a reboot
phigmeta said:
Im sorry I did not explain well what my issue is.
I do not have CWM installed, however i did delete a few appilcations using titanium backup. This causes updates to not take. I would really like to just take it back to factory and start over (this time with less stupidity on my part)
I of course would assume that once its at factory i can then install updates again.
Right now when i try i get the "!" droid sign and a reboot
Click to expand...
Click to collapse
Hey
OK unless someone can tell us how to "make" an ODIN flashable ROM for you, here is what I would do (and please don't get scared because it sounds a bit convoluted).
First, you need to be rooted. This is obviously the case.
IMPORTANT since you don't have CWM installed yet, SAVE your factory restore.img before proceeding, this saves you a lot of hassle later!
Open the android terminal, type su (accept the prompt) and then type (or copy/paste)
dd if=/dev/block/mmcblk0p6 of=/mnt/sdcard/factory_recovery.img bs=4096
Check that you have a "factory_recovery.img" file on your sd card now it should be about 8M big.
Now you're safe to install CWM from the forum, look for the other thread(s) where this is being discussed and follow the instructions for the P6800 "international" version with 3G. CWM Thread here:
http://forum.xda-developers.com/showthread.php?t=1613638&highlight=cwm&page=3
Then (thanks to nicduim!) there is a full factory (rooted) CWM image floating around on the forums here:
http://forum.xda-developers.com/showthread.php?t=1613638&page=6
Which I used to restore my tab to "almost factory" with the missing bloat apps back in place.
I have a copy on my server here: http://ww.mywo.org:88/XDA/sch-i815/ it's the "2012-05-06.22.48.58.ZIP"
unzip that and put the contents on your INTERNAL SD card in the folder clockwordmod. So on your internal SD you should have /clockworkmod/2012-05-06.22.48.58 and inside there the files boot.img, recovery.img etc.
Use CWM recovery to restore this backup. If you never used CWM before. Press power button and volume up and hold both until you see the menu screen with text. You can go up/down with the volume buttons (go slow, it's very laggy) and with the power button you "select" an option. Select the "restore from backup" option and point it to the only folder being offered, the 2012-05-06.22.48.58.
The restore takes a while, then reboot the tab. Now you're back to stock! Last thing you need to do is get rid of CWM again because in the end it's still a bit buggy and will prevent the OTA update from running properly.
Since you luckily have a backup of the factory recovery in form of that factory_recovery.img file, just install and open terminal again, type su and then type (or copy)
dd if=/mnt/sdcard/factory_recovery.img of=/dev/block/mmcblk0p6 bs=4096
This overwrites CWM with your original Samsung Android recovery.
Now you just reboot as usual, connect to the internet and wait until the popup message shows up that a system update is ready, accept it and enjoy
If you don't want to wait for the automatic OTA, you can also stop before killing CWM and use my convoluted 2-step manual update which will get you to the exact same condition as the official OTA.
Hope all this makes sense
I was already on stock FD01 when I tried installing CWM for the P6800 that's floating around here somewhere. Odin said it was a success, but it looks like it didn't take. I've done it a few times, but still ended up w/ the stock recovery. However, after reading through your thread, I do not see a /dev/cdma_update in my I815 either. Is it possible that my attempt to install CWM (although unsuccessful) wiped out this file, among others?
Right now, I'm still at stock FD01 (rooted) and everything seems to be working. When I tried doing an OTA update, it just tells me that I have the latest update and no newer update is available.
One other thing, if I have to, I only have the stock recovery right now since CWM didn't take, can I simply flash both zip's using the Samsung stock recovery to put everything back in stock?
SCH-I815_FA02c_To_FD01.1.zip
SCH-I815_FA02c_To_FD01.2.zip
AlpineMan said:
I was already on stock FD01 when I tried installing CWM for the P6800 that's floating around here somewhere. Odin said it was a success, but it looks like it didn't take. I've done it a few times, but still ended up w/ the stock recovery. However, after reading through your thread, I do not see a /dev/cdma_update in my I815 either. Is it possible that my attempt to install CWM (although unsuccessful) wiped out this file, among others?
Right now, I'm still at stock FD01 (rooted) and everything seems to be working. When I tried doing an OTA update, it just tells me that I have the latest update and no newer update is available.
One other thing, if I have to, I only have the stock recovery right now since CWM didn't take, can I simply flash both zip's using the Samsung stock recovery to put everything back in stock?
SCH-I815_FA02c_To_FD01.1.zip
SCH-I815_FA02c_To_FD01.2.zip
Click to expand...
Click to collapse
Oh wait, so you are saying that in "About device" your Android is 3.2
Baseband i815.04 V.FD01 I815FD01
and your Build number is already at HTJ85B.I815FD01.SCH-I815.I815FD01 ?
That would mean you are already updated. In this case, it should be pretty easy to fix your problem. Which apps did you delete with Titanium? I can back them up from my system and make them available for you. All you'd need to do is drop the backup files into your Titanium backups folder and then fire up titanium and restore them!
The /dev/cdma_update node is only required WITHIN CWM recovery, so that is nothing for you to worry about. The zip files above won't help you because they are incremental updates requiring your system to be at FA02, not FD01 !
Yes... I'm already in the latest update. I already backed up the bloatware using Titanium Backup before uninstalling. So I just need to restore them back in order to receive and apply OTA updates in the future?
Sent from my SPH-D710 using Xparent ICS Blue Tapatalk 2
Please Help
Hi. I'm rooted and removed all sorts of bloatware with Titanium. I did this a long time ago and did not back anything up because I'm used to running hardware with custom ROMs available, and not relying on OTA updates.
Since there aren't any custom ROMs for the i815, I'd like to get ready for the upcoming ICS update. To do so, I want to get FD01 loaded onto my device, but I can't update because I've apparently removed too much of the required bloatware.
Does anyone know WHAT pieces of bloatware I'd need to reinstall in order for the OTA update to apply? I'd assume I can restore them and then apply the update and re-root.
If anyone can help pinpoint what missing APKs might help, I'll give them a shot. And, to the extent I figure anything out, I'll repost here in the hopes that it helps someone else.
electron,
Your instructions worked ... thank you so much
@jkrell... the failed attempt at installing the update should return an error message(s). You just have to read through them until you find the culprit(s). Apparently I uninstalled a few odexed files that were needed. I couldn't update until i hunted them down and restored them.
I guess we all jumped at the opportunity to install the cwm recovery image, that we didn't even think about cmda updates....ooops. So far i had to do a complete factory restore after the update. I was getting soft bricked to the point where I had no choice. Good thing I sent all titanium backups to actual sd card, i was able to salvage 97% f my data..... with the exception of a few downloads i forgot to move.
Gamecih doesn't work anymore (either version). No more automative data hacks I'm not sure what's going on. I uninstalled adfree..used titanium backup to uninstall both versions and reinstalled both several times. Oh well.
It really sucks not having nandroid backups but it's not worth the trouble of having to do this everytime an OTA modem update gets pushed to my tab. Needless to say, I won't be odining the cwm based recovery image again.
I'm with the O.P. I wish i hadn't wasted my money on this tab. No true cwm for this tab, so no dev will ever waste thier time with this tab. The sch i815 will soon be forgotten about and some other tablet will be all the hype before summer ends....that's just how it is. 21 months left on my contract.... [email protected]#k my life. Lol
Thanks Smitty.
When I try to update, I just see the "!" logo and then the device reboots. Is there a log file somewhere I can look at to see what the errors are?
I hear ya on the gloom and doom, but this device has only been out for just over 3 months now. I'd expect a recovery and some custom ROMs to come eventually. I doubt I'll go the custom ROM route unless CyanogenMod is supported, because I have no complaints about the tablet's performance thus far. It's speedy, smooth and the battery lasts forever.
In my book, this is a great tablet and I'm satisfied with the purchase.
Honor released an update today for its KIW-L24
This will upgrade your system to KIW-L24C567B351 from any of the versions given below.
If you are in KIW-L24C567B331CUSTC567D003 - Download the package from http://update.hicloud.com:8180/TDS/data/files/p3/s15/G79/g0/v74510/f1/full/update.zip
If you are in KIW-L24C567B334 - Download the package from http://update.hicloud.com:8180/TDS/data/files/p3/s15/G79/g0/v74512/f1/full/update.zip
This update consists of latest January Google security patches and few important bug fixes for device.
vsriram92 said:
Honor released an update today for its KIW-L24
This will upgrade your system to KIW-L24C567B351 from any of the versions given below.
If you are in KIW-L24C567B331CUSTC567D003 - Download the package from http://update.hicloud.com:8180/TDS/data/files/p3/s15/G79/g0/v74510/f1/full/update.zip
If you are in KIW-L24C567B334 - Download the package from http://update.hicloud.com:8180/TDS/data/files/p3/s15/G79/g0/v74512/f1/full/update.zip
This update consists of latest January Google security patches and few important bug fixes for device.
Click to expand...
Click to collapse
Thanks for the note, but either there is an issue with the update or the file got corrupted on the download. I flashed it and emui went through the update process, rebooted and then said my SD card was corrupt and to format it.
I have a 128GB card full of music TBU and saved ROMs that I did not want to lose. Went back via TWRP to previous and no damaged SD card and all is well.
Might have been the file was corrupted but just be caareful and always backup before you make any changes.
So nice of their support site to be down...
tomlogan1 said:
Thanks for the note, but either there is an issue with the update or the file got corrupted on the download. I flashed it and emui went through the update process, rebooted and then said my SD card was corrupt and to format it.
I have a 128GB card full of music TBU and saved ROMs that I did not want to lose. Went back via TWRP to previous and no damaged SD card and all is well.
Might have been the file was corrupted but just be caareful and always backup before you make any changes.
Click to expand...
Click to collapse
Instructions > https://forum.xda-developers.com/honor-5x/how-to/guide-force-installing-stock-ota-t3502874
What are the bug fixes???
Are there any new features???
I am currently on custom ROM and would like to know the answers to these questions to see if it's worth it to go back to stock rom
Hi, is there a full firmware package for this new version? Tried to upgrade and got soft-bricked and I don't know if it's safe to flash the full B331 package.
[EDiT]
Flashed the full B331, booted and applied the B351 update by powering off and pressing Vol+ & Vol -. After booting it still says B331 and my WiFi is dead.
m0ndul said:
Hi, is there a full firmware package for this new version? Tried to upgrade and got soft-bricked and I don't know if it's safe to flash the full B331 package.
[EDiT]
Flashed the full B331, booted and applied the B351 update by powering off and pressing Vol+ & Vol -. After booting it still says B331 and my WiFi is dead.
Click to expand...
Click to collapse
So much miss information .. no one bothers to find the truth
Can I ask where/when/how you found these files? There seems to be nothing official available, nor will Huawei provide any information about any prospective update.
animeme said:
Can I ask where/when/how you found these files? There seems to be nothing official available, nor will Huawei provide any information about any prospective update.
Click to expand...
Click to collapse
Link below or install the Huawei Firmware Finder form the Google Play Store and set it up to get OTA files in settings.
http://hwmt.ru/hwmtsite/firmware-database/?firmware_model=kiw-l24
deleted
So did anyone ever take a wack at this? I've done a lot of googling and haven't been able to find anything official off the support site about this update so I was wondering if it was legit or not? I know how the update zip suppose to work and how to make it work. Just wondering if anyone used this.
GrimReaper24 said:
So did anyone ever take a wack at this? I've done a lot of googling and haven't been able to find anything official off the support site about this update so I was wondering if it was legit or not? I know how the update zip suppose to work and how to make it work. Just wondering if anyone used this.
Click to expand...
Click to collapse
What he said.
I'm hoping it's nothing more than a VoLTE update that LOS maintainers warn against anyway, if there's actually no one to further explain what it is
received this B351 update over B331, also did factory reset, GUI lag seems gone, not noticing new feature
my kiwi-L24 got re-flashed today, it is weird that this B351 update is no longer available from B331's update check
searched on internet, there is news about "honor 5c" getting a B351 nougat update
This came up on one of the 5X's that I have. Updated and forgot to put back stock recovery. Don't be like me and forget to do that. Now it won't work properly and I can't get to start any apps to try and fix it. I can put back TWRP and wipe it, but I don't want to lose my data. I also have that problem now where it keeps telling that the SD card is corrupted. I backed up the data and scrubbed the card in the phone but it keeps coming back with the same thing.
If someone did an actual successful update properly (with stock recovery) then please update and say if everything is working. If not, I'm going to have to find some way to backup the data and then scrub it.
*EDIT*
I believe something like this happened to me before. I was on B151 and went to B331 with TWRP installed by accident. What happened was that the OS was still running EMUI 3.1 but the build was saying B331. After fighting with it (and community support) I managed to get it to B331 fully and EMUI 4.0 - since then and a few custom ROMs I'm back on B151 EMUI 3.1 due to stability. Games and some apps just didn't work on the new one. The second phone was on B331 fully though - then I made the same mistake and it went to B351. This time though, the phone seems screwed. No apps will load. I can get into settings and the file manager, but no Titanium Backup and no Flashify. Going to put back TWRP and try to flash GAPPS and see if it will help me get into Play Store. From there I'll try to reinstall Flashify and flash the ZIP of the update. Will post back once done.
*EDIT*
Well that didn't work. Even after going back and trying to root the device again - then checking the option for it to not detect the dirty flash - still didn't work. Kept complaining that stock apps are already present.
I'm going to try and get some files off the device, but keep having issues. Not sure why. May just have to scrub. Will update again.
*EDIT*
With TWRP on I used "ADB PULL" to get certain files from the root system which I couldn't access otherwise for some reason. Then copied the other things (photos and such) and will now be using the UPDATE.APP to get it working. For this I formatted the SD from within TWRP and created the DLOAD folder (with no caps - so that's dload - but I'm not sure if it matters) and will be copying the UPDATE.APP. Not sure which version yet, because there was some problem with one I had downloaded before. So I need to double-check and re-download.
*EDIT*
So I've successfully flashed the UPDATE.APP from the SD card (same one the phone was claiming is corrupted). Just for reference, here is the file information and hashes.
File Name: Honor 5X_Firmware_KIW-L24_Android 6.0.1_EMUI 4.0_C567D003_United States.zip
Size: 1762266487 bytes
ADLER32: 27cb0c31
CRC32: 1d9379b9
MD2: 6517c34dc9bac0cd8680e3c4fd09d8d9
MD4: 4a803765c0ed54cb5d6853a9f365cd3b
MD5: 04f60b067d546ad71f556e44a7934dc7
SHA1: 8d2718568ac6509a40c95e42857d400395eb88d2
SHA256: 82975923172b3800d3f09f76691f2a694ab98110e3f909084a02bd566448386f
SHA384: da53b58b8e20395595590fd0cec30e56fa6a62e638ec53e46a74ebf58d051fdd7576602019bd3130ca5c00cc432715a0
SHA512: 806e0e8969c293ca8b497a786699ee306352ad6ef434552f2d23decff8a5279c7fd605e046c13f11c2f87947f5a2bdf23d78fdec6263661e68f023fd72bf4381
RIPEMD128: 9d963e5d51c9df9554fa3422da84dd27
RIPEMD160: a1e5b8f08b65dd2bb08e04d62db270ad8f4cf51a
TIGER128: 66fb4e4e4ce11cb30626aea807355f83
TIGER160: 66fb4e4e4ce11cb30626aea807355f8345f1dd79
TIGER192: 66fb4e4e4ce11cb30626aea807355f8345f1dd79dbb39488
GOST: 93774537f6ca49d4406f9d3a0316d014e1e099b34fc1cd9b968dacc870700827
The file name may be different, but as long as you got the right one you should be OK. If you have issues when copied to an SD card - verify that the file on the SD card has the correct hashes. To make it faster use CRC32. For more surety, use MD5. You can get a tool like WinMD5 to check. It's free.
So now that it's done, I'm going to set it up as a new phone and wait to see if the update comes back on. If it does, I'll get it down and upload the B351 recovery. After that I'll need to remember that I have to put back the stock recovery before running any updates. Flashify FTW.
BTW - during the initial setup after connecting to wireless it came back with the update. Pics to follow.
Files will be uploaded here: https://drive.google.com/open?id=0BzqEmGyNP_v6aTZTZDN6bWo2ZEk
*EDIT*
So the files are uploading to the folder. The screenshot is attached. Had one issue where after the update I couldn't get back into the phone. Had to wipe/factory reset. I've used FASTBOOT BOOT TWRP.IMG to take the backups of the BOOT and RECOVERY. Hopefully one of the gurus can use that and give the IMG files. I'm going to try root and get FLASHIFY to backup the stock recovery and add to the folder.
khat17 said:
This came up on one of the 5X's that I have...............
Click to expand...
Click to collapse
I don't really like to do double replies, but I guess for ease of finding the info it's better this way. Unless a mod thinks differently and wants to merge all the info.
Google Drive Link With Files
https://drive.google.com/open?id=0BzqEmGyNP_v6aTZTZDN6bWo2ZEk
This contains TWRP backups of the recovery and boot images. There's also a file called KIW-L24-B351 which was created with Flashify. I assume you can add the IMG extension to it and flash as needed.
Basically I had this update run on another phone (my wife's) and it messed with the phone due to the recovery being TWRP and not stock. My fault - forgot to do that before handing the phone back to her. I believe it happened to me before but it never messed up the phone this way. Nothing would work except core apps like settings and the stock file manager. The Play Store wouldn't even open.
Anyways - back to factory with UPDATE.APP then run the automatic update from an OTA update on wireless, then FASTBOOT BOOT TWRP.IMG and capture the backups. Then flash SuperSU to get root. Then Flashify. Files are uploaded for your convenience.
Warning that during the initial OTA it took a while. And after it was done I couldn't get into the phone with the password. Had to factory wipe/reset again and setup again. Disable passwords just in case I guess. Hope this helps others - have fun.
No major differences. I haven't really used the stock OS6 but some things look a little different. Nothing major. Will see when she's using it if it lags or has improved memory and such. Not sure if I'll be able to test with apps that wouldn't run previously for me, but will see. Tested with TransDrone and it failed. Once SeedBox information is loaded it still crashes. Only happens on OS6 so I'm sticking with OS5 on mine. Does not happen with custom roms however (from what I recall - would have to check back).
Hello every one,
I have the Honor 5X KIW-L24 rooted with TWRP, stock ROM.
I received this OTA update and saddly i pressed the update button. Now the phone is in TWRP loop.
What can I do please help. I already wipe cache and Dalvik, didnt work.
raulpcamara said:
Hello every one,
I have the Honor 5X KIW-L24 rooted with TWRP, stock ROM.
I received this OTA update and saddly i pressed the update button. Now the phone is in TWRP loop.
What can I do please help. I already wipe cache and Dalvik, didnt work.
Click to expand...
Click to collapse
Follow this video if don't know how to flash back stock recovery through adb. Then take a look at those threads how to downgrade, here, here, here. Hope it helps.
bluesky299 said:
received this B351 update over B331, also did factory reset, GUI lag seems gone, not noticing new feature
Click to expand...
Click to collapse
Same here.
It had been too many months of the Honor 5X in the closet so i almost lost track what to do but what i did was revert all the way back to Stock ROM (had to flash an extracted/saved Recovery.IMG) and then do the UPDATE.APP from Dload complete and repeat on up to the current B351.
Of course lost Root but when ready can add that back too.
Yes the Honor 5X runs much smoother now than before plus that Battery Drain issue (Remember That?) where we had to dig deep to change 4 to 0 i think, well Battery Life is also greatly improved on mine.
GrimReaper24 said:
So did anyone ever take a wack at this? I've done a lot of googling and haven't been able to find anything official off the support site about this update so I was wondering if it was legit or not? I know how the update zip suppose to work and how to make it work. Just wondering if anyone used this.
Click to expand...
Click to collapse
I tried to update as the previous user did using TWRP and got the corrupted SD card message. I then tried to go back to stock ROM. Went into bootloop.
Been having a hell of a time getting anything to work properly since.