I can't send or receive any file over bluetooth and edge is so slow it is unusable. Any ideas?
Edit: i can use bluetooth with bluetooth file explorer.. but until I installed all I could do was pair
Sent from my CM7 Motorola Bravo
zachthepack said:
I can't send or receive any file over bluetooth and edge is so slow it is unusable. Any ideas?
Edit: i can use bluetooth with bluetooth file explorer.. but until I installed all I could do was pair
Sent from my CM7 Motorola Bravo
Click to expand...
Click to collapse
How were you trying to transfer files before installing the app? I thought you had to install an app to do more than pairing (correct me if I'm wrong).
As for data, have you had a better signal in the past with a different rom (in the same position)?
I never had problems with edge around here before cm7 but i hardly can do more than gtalk when on it. I was also sending from the stock file explorer send via bluetooth
Sent from my CM7 Motorola Bravo
Can someone post cm7 build.prop
Sent from my MB520 using XDA App
Related
***I am a n00b***
I have searched cyanogens forums as well as xda and google and have not found the answer to my situation. I am hoping that anyone can lead me to the answer.
Basically, I have already rooted my Mytouch 4G and flashed Cyanogen 6.1.2-RC2 onto it, successfully and on the first try. I went around installing fonts and different themes even android market 2.2.7 all this works like a charm.
I have only come across one issue that I have not been able to find the answer for on any forum and I have been looking all day. When I try to pair my phone with my bluetooth, it won't find anything after scanning. There were only 2 times out of around 50 times that I got my bluetooth headset to show up, when I did, it said "cannot establish communication to jabra so-and-so". What I would like to know, I read that it has to do with the firmware or something. And browsing around, people said that it was fixed with a nightly build. I attempted to extract a .bin file but later found out it was only for the G1. I don't understand that, can anyone help me out? either explain what to do or do I have to wait for an update? Thank you so much!!
It may be a communication error with the Jabra..... I have a Platronics 320, and mine works perfect with no problem.. would you be able to try with another headset?... I have the same rom as you...
Sent from my HTC Glacier using XDA App
I have a jawbone...i will try that one, ive been reading more and more about this, i thought there would be a patch out or something to fix it but i'll try my other bluetooth...err...blueteeth lol. Thanks for responding back!
No problem... Let me know if it works with the Jawbone... I am pretty interested to see if that is the issue
It's not the ROM. Check your earpiece pairing instructions. Spent so much time, reflashed, etc. _ pairing a Jabra but I was using a Samsung pairing procedure.
If we have same Jabras, turn it off then press power continuously until it shows on bluetooth scan, then pair.
Sent from my HTC Glacier using XDA App
Yeah I will... its so strange because there are times I'm trying to pair and the closest I ever got was it said incorrect pin or passkey...which as I know from selling phones at tmobile for almost 4 years is 0000. but the problem is, there's no where to put in the passkey. I tried menu long pressing and nothing..btw I'm using a jabra stone 2 just got it for christmas so I'm sad if I can't get it to work. Thanks for all the support
Sent using Mytouch 4G
rooted and flashed
w/ cyanogen 6.1.2 RC2
So it worked....putting the headset in pairing mode was hard to figure out without instructions....I had to hold the bluetooth button down for like 40 seconds
Sent using Mytouch 4G
rooted and flashed
w/ cyanogen 6.1.2 RC2
Continuing JVP build issues:
I am heavily using bluetooth hands free in my car. With JVP build after a couple of phone calls over bluetooth, the bluetooth just hangs. The icon shows device connected even when no bluetooth device is around. In any case it will not use the bluetooth handset. Turning bluetooth on off will not solve the problem, only rebooting the phone.
Anybody else has this problem?
Same here
Sent from my GT-I9000 using XDA App
I had this issue with jvo-jvp
Try to stop the pairing and pair it again. Works here, better than restart the phone...
Sent from my GT-I9000 using XDA App
Same here... Unpairing and pairing again did not work, even with bt device off. Had to reboot every time. Went back to froyo because of this.
Sent from my GT-I9000T using XDA Premium App
Are you all on stock Kernel ?
I was on cf-root 3.7 with all tweaks disabled. But others have reported the same thing on stock.
same here...
cf root 3.7 also...
Yep getting the same in my car :/
Not too disappointed because i know it's pre-release firmware.
Hoping that it would be fixed in the final release.
Another reason to post such problems here, since we all know Samsung devs are reading this
Can anybody with this problem confirm that it remains even with stock.kernel?
Sent from my GT-I9000T using XDA Premium App
{Angel} said:
Can anybody with this problem confirm that it remains even with stock.kernel?
Sent from my GT-I9000T using XDA Premium App
Click to expand...
Click to collapse
I have initially reported the problem with stock kernel
JVP bluetooth
I am on Ramad deodexed JVP running on speedmod kernel. I use bluetooth for music and also phone call everyday. So far it is running ok not much of a problem.
squall77 said:
I am on Ramad deodexed JVP running on speedmod kernel. I use bluetooth for music and also phone call everyday. So far it is running ok not much of a problem.
Click to expand...
Click to collapse
After this problem with stock jvp,i was trying with ramad's deodexed first without any other kernel kai then with supercurio,the issue was there!!
I don't have bluetooth audio with JVP (Juwe v5.0)
Same problem here in stock rom with stock kernel. Cant pair bluetooth headset after pairing with my computer. Have to unpair both and pair the headset again. Realy boring bug...
Does This Update Fix the Issues with In Car Bluetooth?
9/10 When my phone rings the In Car Blueooth Does not take over?
I had similar problem. Then Bluetooth stopped working altogether. When I click to enable bluetooth it just hangs there and than turn it off.
At first reset helped but now it doesn't.
I am on JVP cf-root kernel ROM made on ROM kitchen.
same here
i need this bluetooth audio works.....
help please.....
My problem was definitely kernel related. This first post (and the second) on this link helped me:
http://forum.xda-developers.com/showthread.php?p=14058744&highlight=bluetooth#post14058744
Hope that helps.
Hi, recently shifted to AOKP ICS Built#29 through Overcome as instructed. But facing a problem connecting to my Bluetooth headset (in spec written Bluetooth 2.1 with EDR). The tab is being able to locate any other devices such as Nokia Handsets, laptops but can't find the headset. I was using the same headset with the same tab without any prob previously but of course it was then with Froyo 2.2. Can anyone pls help on this issue? Thanks in advance.
Sent from my GT-P1000 using XDA
Hi, i'm under #31 build,
and often use nokia bh 505, sony mw600 and motorola eq5 bluetooth headset/speaker with no problem. Never had some in the past too.
All work like a charm: play/pause, next, previous, calling...
Did you do a full wipe.? I'm using, humberos kernel 20120410 wich is include in the build.
For a while now, i always perform full wipe when i change build, like that all rocks.
I bought titanium pro, restoring is automatic, and in 3 minutes, all my apps are restored!
Bye, Yoh
Hi guys,
I have a very strange problem with my beloved note. After I get in the car and drive off I remember that I have to turn bluetooth on so it can connect to the hands free system. The thing is that it doesn't connect automatically, I have to go into the settings and tap the BT name in order to connect it. If on the other hand if I have BT already enabled on the phone before starting the car, it conmects automatically. With the first version of GB the Note had in November I didn't have this issue, but after the first update it started not to work. Now I am on official unrooted ICS 4.0.3. Never had this problem with any other phone.... Any help would be highly appreciated.
Thanks.
Sent from my GT-N7000 using XDA
Anyone?
Sent from my GT-N7000 using XDA
n.vasiliu said:
Hi guys,
I have a very strange problem with my beloved note. After I get in the car and drive off I remember that I have to turn bluetooth on so it can connect to the hands free system. The thing is that it doesn't connect automatically, I have to go into the settings and tap the BT name in order to connect it. If on the other hand if I have BT already enabled on the phone before starting the car, it conmects automatically. With the first version of GB the Note had in November I didn't have this issue, but after the first update it started not to work. Now I am on official unrooted ICS 4.0.3. Never had this problem with any other phone.... Any help would be highly appreciated.
Click to expand...
Click to collapse
You can try Automatic Bluetooth Toggle PRO (I think there is trial version on Google Play). I don't know if it will help you. If not then I'm sorry you will probably have to go back to GB. I'm still on GB as I was also having issues with bluetooth on stock ICS (CM9-based ROMs worked well though).
Thanks a lot. GB had the same annoying problem though :-(... so it's not that....
Sent from my GT-N7000 using xda app-developers app
Hi,
Did you allow the pairing automatically between the devices?
When you pair at installation, it isn't permanently (= automatic) yet. When you get in your car and pair for a second time, normally your phone asks you if you allow your hands free system to access your phone; at that moment you have to tick "don't ask me again" and "yes" for automatic paring.
You might want to disassociate the two and try a new setup (pairing).
To disassociate, stop the system in your car (that cuts the BT connection between the two), disassociate on the phone (push and hold your hands free system in the BT section of the phone and chose disassociate), reboot your phone (so it forgets your cars BT system) and start pairing all over again.
I would provoke the second connection so you get the "automatic" question to make it work.
Good luck :good:
I have the same problem with the original ICS rom.
Flashing a custom ICS rom fixes this problem.
I tried kingdroid (worked ok)
I tried Cyanogen (phone ok, no media audio over BT but connection OK).
I had a similar problem after upgrade with stock ICS through software update. I couldn't pair Note with Mercedes bluetooth. Galaxy Note recognized Mercedes BT & vice versa, but connection was impossible. I read every forum on internet but no help. Everybody was blaming Samsung and ICS. Some suggested resseting Note to factory default, others downloading bluetooth app etc.
Until...I finally figured out that something was confusing my car's BT, so I resseted car system, and the problem was solved.
Sent from my GT-N7000 using xda app-developers app
These is a twist with "old" BT systems and ICS: Old BT systems want you to insert a pin code, ICS wants you to to confirm a code that the BT system sends and that ICS shows on the screen.
It's obvious that that ICS on an old system can be a hassle.
A work around is to put the car in discover mode (so it shows the pin code) and then send a contact (or a picture) from the phone to the car system. As the car replies, your phone will show the possibility to insert the PIN Code.
After that your system should work.
At second connection make the pairing automatic (as I described above) and you're happy.
(This is not my discovery, I found this solution on the SE XPeria Ray forum as I had problems with my wifes phone )
Thaks a lot. I will try as soon as I get the chance and will let you guys know.
Sent from my GT-N7000 using xda app-developers app
So with the workaround mentioned above - it doesn't work. When turning on bt on the phone it won't automatically connect to the car.
Sent from my GT-N7000 using xda app-developers app
Try A2DP Volume on the market.
I have the same problem as you. I used a leaked ics rom on my galaxy s2 and also had the same problem we now have on our ics galaxy notes. My car's head unit is a 3 year old eclipse cd5030. For the last month ive just been manually pairing it every time. PITA. Ill try the workaround suggested earlier in this thread and let you know. Otherwise i think cyanogen mod rom may work.
Sent from my GT-N7000 using Tapatalk 2
Let me know. I am.not going through the trouble of putting anoyher ROM on the phone.just for that
Sent from my GT-N7000 using xda app-developers app
n.vasiliu said:
Let me know. I am.not going through the trouble of putting anoyher ROM on the phone.just for that
Sent from my GT-N7000 using xda app-developers app
Click to expand...
Click to collapse
I had similar issues with Parrot 9200 kit in my car. Paired automatically under GB but on stock ICS wouldn't pair unprompted. Sometimes it would but only after minutes.
I'm on Paranoid Android 0.4 now which is CM9 based. It's better but often still slow to pair unprompted. Main improvement for me is that the phone doesn't carry on playing music through its own speaker, like it did on stock ICS, when I turn off the engine.
There is an app on the market called "Auto Connect 2.0", but it is only available for ICS and above Android versions
atiesfo the
i have same problem with my note, but with my Galaxy S1 works fine, when i upgrade the android to 4.0.4 solves the problem.
Hey guys, been a while. I'm having some trouble with this app I'm trying to use with my continuum.
Link to app
Every time I try to connect to my GNex it tells me there was a connection error. I know it has to be an issue with my continuum because my Archos 70 pairs and works fine with my GNex. Any ideas? I was on EG04 and it wasn't working so I jumped back down to EC09 and it's still not working. Completely stock on both aside from root on EG04.
I have only been successful connecting bluetooth headsets have not ever had much success using bluetooth data transfer or as a wireless controller such as your application.
Old samsung touchwiz roms are missing something important in the bt stack... So functionality is extremely basic, unfortunately xP
Sent from my SCH-I400 using xda premium