Mine seem to stay between 1300 and 1500 oc to 1.1
Sent from my somehow brand new even though I just bought it yesterday nexus one
For me I cant tell you the score on top of my head but I get a result below the Motorola X on quadrant standard on both 2.3.4 stock and CM7.0.3 (not overclocked or Underclocked). In the past I would get higher scores when I was running 2.2 and 2.2 rooted. I don't really use too much of the performance I actually underclock my N1 to 600mhz so it can last me almost a day of battery consumption with heavy use.
Related
With Linpack I see people getting to 848mhz and even 1ghz.
I lose stability at 787mhz and I'm ok at 768. I know that different chips vary... but 1ghz difference?
Is there a way to overvolt on the Eris I don't know of?
The eris OC at 1ghz....thats a lie and some one is pulling your leg lol. The eris is not built handle that and if it did reach 1ghz the motherboard would burn up.
Yeah but 848mhz isn't so farfetched. I can do 787 for a while without any freezes. The freezes do happen though.
If you overvolt it shouldn't be impossible to get up to 848mhz.
As for the 1ghz + entries on linpack's site I think it must be another phone running Eris ROM's/ basebands.
Hungry Man said:
With Linpack I see people getting to 848mhz and even 1ghz.
I lose stability at 787mhz and I'm ok at 768. I know that different chips vary... but 1ghz difference?
Is there a way to overvolt on the Eris I don't know of?
Click to expand...
Click to collapse
I can do 806 all day with Aloysius but my buddy with the same exact setup (i setup it up, so I nkow its exactly the same) can only get stable at 768.
I have not seen anyone with proof or that is respectable, show that they can keep their phone over 806.
"Begin envy now "
I do lol
So there are NO overvolt kernels/ methods?
I can run 806 stable with evil Eris 3, most of the other roms crash when I clock them at 806.
Lucky lol my processor seems to be stuck at 768. 787 doesn't last too long and it's not worth the random FC'ing. I'm sure it would be stable with more voltage and heat hasn't been an issue for me at all at 768 even with Pandora/ Zenonia running for quite a while I haven't gotten even lose 50C.
The question is why would one want to OC that high. I see absolutely no difference in performance at 710 vs anything higher. Probably even lower than that. I just don't see why you would want to run any higher and eat up your battery as well as tax the processor and board more when there isnt a noticeable difference other than linpack scores. Just my opinion but I think all new to OC'ing should be aware that faster isnt always better.
I know that lol I mean... a lot of people who overclock computers don't do it for a performance boost, they do it because they want to see if they can. They won't get better gaming performance they just get a slightly better benchmark.
I want to do it just to do it.
Ok rock on speed demon On that note, I wonder if it could be clocked to the max in a freezer room. If the low temp would help or if it is just hardware limited.
The MAIN problem with overclocking with voltage modification would be heat/ ****ty PSU. I'm sure the Eris battery can get up pretty high, it's a matter of staying cool. I would like to see how high I can get with cooling but I don't even know if overvolting exists for the Eris lol
Dont know about over but I know you can undervolt on it.
If there's undervolting there should be overvolting... someone has to know lol I've tried searching XDA and google but I can't find anything specific.
n2imagination said:
The question is why would one want to OC that high. I see absolutely no difference in performance at 710 vs anything higher. Probably even lower than that. I just don't see why you would want to run any higher and eat up your battery as well as tax the processor and board more when there isnt a noticeable difference other than linpack scores. Just my opinion but I think all new to OC'ing should be aware that faster isnt always better.
Click to expand...
Click to collapse
I tested 710, 768 and 806. I didnt just test with linpack either. I just used apps I normally would run, running for a few days and what not and noticed a difference from 710 to 768 but not really a noticeable diff from 768 to 806. I still keep it at 806 for reasons that my battery life is better. Dont ask me how or why but it just is. I have mine set at 806/480 and for sleep, 480/240. Now most of the day my phone is just in my desk drawer so that could be the reason but i still go a full day with heavy use at the end of the day (bt, wifi, internet radio, run keeper) and still have about 30%+ left when I go to sleep at 10
I have never had a problem with battery lol since overclocking my phone I've only increased battery life. Significantly so.
There has got to be some sweet spot there for OC'ing that gives best perform with least batt consumption. Just wish I knew what it was.
People are getting high because all processors aren't the same. So some can handle, some can't. As for the 1ghz it's a big lie. According to several people including jcase linpack scores can be easily edited and faked. I wouldn't believe anything on linpack that's outrageous.
I sorta figured they wre faking somehow. And I know some processors can handle higher speeds, that's the basis of overclocking. I want to know if I can overvolt my processor.
Can't help you there. Maybe go ask in the IRC? I'm curious if you can as well.
I can hit 787 and run stable... linkpack scores around 5.3-5.4. Oddly enough, my fone refuses to run at 768. I actually have to use a txt file for setcpu to remove 768 from the equation with profiles and the setcpu "trick" my battery life is GREAT. Much better than "stock" even.
-------------------------------------
Sent via the XDA Tapatalk App
How far have people got with over clocking their Visions?
Mines over clocked at 1GHz, i don't think id be increasing it any time soon think it would ruin my battery life
How far have all you all got to? Stable of course
That I know, we're at 1.8ghz so far. I keep mine at 806mhz all day since I barely use it throughout the day. Once I get home, I clock it up to 1.5ghz when I'm using it.
I've ran it once at 1.8ghz running a couple of benchmarks (linpack, neocore, quadrant)
It did very well, but, ran very hot (could be due to the fact I had it connected to the charger at the same time)
Either case, how much you get out of your battery depends on how you use it, how you set up your cpu profiles (dependant on which you use. I.e. cpu tuner, setcpu), and what frequency you're constantly letting your phone run on.
I run mine at 1.5ghz, see no need to push it further. Im getting all the performance I need at 1.5ghz. I use setcpu profiles, one to severely underclock when it reaches a certain temp and a charging profile that runs at stock clock to reduce heat when charging.
1.3ghz. Not like i feel it however. But 1.4ghz one they have posted wasnt 100% stable for me.
Hi, after I updated quadrant standared, im now getting 1300 - 1450. Before the update I was easily scoring 1500 - 1700. Is this happening to anyone else? Im running stock froyo
Sent from my T-Mobile G2 using XDA App
same here. I thought it was because I was running CM7. Seems like that it might not be the same. I am scoring about 200-300 less than normal.
Noticed this as well. Score went from what I have in my sig to 2400ish at 1.5ghz. Scores have dropped in Smartbench 2010 update also.
hi, i've got a htc wildfire.. well obviously considering i'm posting in this section
anyway, i've installed wildpuzzle 0.8 with the overclocking kernal, what i'm wanting to find out is....
when running setcpu, the cpu will change it's frequency depending on usage.
but what about if setcpu isn't installed and you use the rom to overclock to say 748.. will the cpu stay at 748 permanently, or will it drop down and up natively depending on usage, like setcpu does??
thanks
i would say without set cpu or a specific speed framework, it would revert back to standard 528max 480min
which overclocking kernel have you got, be aware that if you have 130 kernel and overclock, wifi hotspot will not work, you can see phone but you won't be able to connect, you need to use 055 kernel from wildpuzzle 8.0.11 thread.
a small side note, i have just recently changed my overclocking from 691max to 652max, no discernable difference in speed, linpack for 691mhz was 2.9, for 652mhz i'm still getting 2.8 mflops, but huuuuge difference in battery life.
691 max struggling to get 2 days, 652 max after 24 hours i still have 82% battery left.
how do you see this mflops thing? and is it like a cpu score?
subwars said:
how do you see this mflops thing? and is it like a cpu score?
Click to expand...
Click to collapse
Download Linpack For Android from the market, and, Yes, in a way, it is like a CPU Score.
Will it damage my processor? I wanna use it but I don't wanna kill my phone!
Sent from my Desire HD using XDA Premium App
No, it won't kill your phone but it will drain your battery freaking fast...
Yeah, prolonged overclocking will build heat and may damage your phone. And why do you want to overclock up to 1.9GHz anyway? There's no performance boost after 1.6GHz afaik.
Edit: maximum performance I get is around 1.5 - 1.6GHz average over repeated benchmark of different software.
I got my Virtuous finally at 1.7 GHz (yeah!) and team the Quadrant Benchmark and gained about 200 points more, but I got to agree: there is no performance boost which you can see without benchmarking.
So I will put it back to 1.5, that's enough.
Edit: WTF? I've put it back to 1.5 and got 100 more points than with 1.7?!