Hi, i˙ve searched the forum and haven˙t noticed that anyone had this same issue as me. I am on insertcoin rom 1.0.8 and wanted to change the boot animation. What i did is: found the boot an. that i like and puted it in /system/customize/resource/ so now boot anamiton work fine but the downboot animation not. What i˙ve find out is when i tryed to put downbootan. again in the same folder (replace the old one) it told me that there is not enough space?!
EDIT: well i see now that there is only 3.68MB free, damn. What can i delete to make some space on nand ?
Related
Hi Bro,
Im running android on my HD 2
Energy rom (rom version 6 aug 2010)
Radio 2.10.50.28_2
Android rom (mattleo 1.7 / froyostone 2.2 both rom will give the same problem)
I keep getting problem when rebooting back android on my HD2 (2nd or third time). normally the first time i boot android its quite slow (its normal). the second time its faster. but when this problem came it take very long to boot back to android. Below is the message appear
"failed to find rootfs on SD card. You need to unzip rootfs zip file to the root of your SD card. (i didnt delete any rootfs file from ny sd card????)
/bin/sh:cant access tty; job control turned off"
this problem is random...normally the 3rd or fourth time i boot android or sometimes the 2nd time i boot. when the message above appear, it will take way to looooonnnng to boot back to android.
any thing that i miss bcos i follow all the direction on installing android on HD2. first time boot all working, 3g, wifi, no robo voice, marketplace, internet access all working superbly...
sorry my english not that good, im from the longhouse of borneo island..
Do you have the files stored in the root of your sd card or in "Android" folder? I would put everything in the "Android" folder; it just keeps things more organised. You may need to edit your startup.txt file to point to where your installation is.
dammit.....i put it on root...
sorry for my mistake n ignorance not reading the readme file...
thanks n will let you know if its solve the problem.
im using mdj 2.3 clean and S6 kernel.
ive done 2 things and android dont go past black screen and HTC logo.
first i put the new build.prop to fix the green camera, while in windows mobile, inside SD/ANDROID/ROOT/SYSTEM/build.prop
i didnt boot android yet, i created a folder inside SD/ANDROID/ROOT/SYSTEM
called FRAMEWORK and i put framework.jar for RTL inside:
SD/ANDROID/ROOT/SYSTEM/FRAMEWORK/framework.jar
now i tryed to boot android and no success.
what i did is remove all changes but still android wont boot.
what might be the problem/solution?
im trying to save my build here cus i did alot of changes and i have no backup.
i think its the build.prop that wasnt compatible, what can i do to fix it?
eeeeeee said:
im using mdj 2.3 clean and S6 kernel.
ive done 2 things and android dont go past black screen and HTC logo.
first i put the new build.prop to fix the green camera, while in windows mobile, inside SD/ANDROID/ROOT/SYSTEM/build.prop
i didnt boot android yet, i created a folder inside SD/ANDROID/ROOT/SYSTEM
called FRAMEWORK and i put framework.jar for RTL inside:
SD/ANDROID/ROOT/SYSTEM/FRAMEWORK/framework.jar
now i tryed to boot android and no success.
what i did is remove all changes but still android wont boot.
what might be the problem/solution?
im trying to save my build here cus i did alot of changes and i have no backup.
i think its the build.prop that wasnt compatible, what can i do to fix it?
Click to expand...
Click to collapse
I had something similar happened to me as well...no changes yet it won't boot all the way anymore. Stuck on green HTC screen. I suspect file corruptions so I redownload the clean build, move my data.img to it, fix! You can give that a go. Good luck.
azzzz said:
I had something similar happened to me as well...no changes yet it won't boot all the way anymore. Stuck on green HTC screen. I suspect file corruptions so I redownload the clean build, move my data.img to it, fix! You can give that a go. Good luck.
Click to expand...
Click to collapse
im doing it right now
EDIT: im trying replacing the rootfs only maybe this will solve it.
EDIT: replacing rootfs with original solved the problem
With the FutureShocks v7.5 ₪ MIUI 1.1.14 rom for SDCARD -- I keep getting stuck at the HTC Boot screen. How long does this rom normally take?
Ive tried this twice by deleting it and putting the android folder back on. I havent tried reformatting the SD Card yet, I'm going to try to reformat the sdcard and figure out what I need to do.
But I didnt know if there were any tips or tricks on this ROM and I didnt want to hijack anyone elses threads that could be pertinent to someone elses rom. I'd post in development but i dont have enough posts so please people/mods don't be mad at me.
Im not trying to be a noob, Im just trying to be respectful. I would use the search feature but due to the browser that I'm using on my box, I'm lucky that I can even post.
-- Edit:
Ok so I tried doing a Quick Format on the SD Card and putting it on again. Nothings happening... any suggestions!?!? What should I do..?
Edit2:
I think I figured it out, we'll see here in a bit, I wasnt paying attention and had renamed the folder but didnt change the path in startup.txt -- well I did it how i should and i think it'll work. I did a stupid nub mistake
Hello,
Last year I had installed a custom WM6.5 rom to my android, an "energizer" rom. The very first splash screen, the one appearing just after pressing the power button, was replaced by an energizer logo.
Then I went ahead and installed an SD card Android, but since it required WM6.5 to load first, the splash screen was still the same.
Now I installed Magldr and CWM_Recovery, then a custom NAND Android rom.
However the first splash screen of energizer is still there. I don't want it. I want my own image to be there, since it's obviously changeable. Do you know how I can change that, without harming my magldr or cwm installation?
Thanks!
you need to creat one and turn it into a nbh file, there was a tool that did all this for you, ight need to search this place for it or google
See "watermarking " link in my sig.
That seems to be the solution I've been looking for, I hope I can make it work
I'll use the 0x600 memory space, right? Because 0x601 will remove MAGLDR I have installed?
harzem said:
I'll use the 0x600 memory space, right? Because 0x601 will remove MAGLDR I have installed?
Click to expand...
Click to collapse
correct. .....
Great, now the very first boot image is my custom one
Then the Magldr boot sequence starts with some codes like a terminal screen. And then a HTC logo appears for several seconds. Finally an animation starts, stays there for half a minute, and the OS loads.
Now, is there a way to change the HTC logo there, the one after the magldr boot?
Too much searching, but this one got me working:
http://forum.xda-developers.com/showpost.php?p=12574728&postcount=5
The mount command had to be changed to the following though:
mount("yaffs2", "MTD", "boot", "/boot");
However the problem is that the rle files I make up myself don't display correctly on the phone. This exact problem was faced by other people as far as I can see, so my last problem is now that I need to be able to convert a bmp file to rle that the phone can display.
And this one can create correct rle files:
http://www.androidtablets.net/forum...-bootlogo-before-animated-boot-animation.html
I'll make a tutorial tomorrow so that other people can make this easily
harzem said:
And this one can create correct rle files:
http://www.androidtablets.net/forum...-bootlogo-before-animated-boot-animation.html
I'll make a tutorial tomorrow so that other people can make this easily
Click to expand...
Click to collapse
Nice, do post a link when you do, to finish this thread off.
Hi guys,
I installed the CyanoGenMod 7.1.0.2 and I have to say that the logo is really interesting but, u know, 10 minutes watching the same circle while trying to "touch the android to begin" are sufficient...
Like ever, I didn't make a copy of backup before follow the procedure to install this rom (yes I'm stupid)...
Now, I'm downloading the 7.1.0.1 but i can't copy it into the SD card because windows doesn't see my xperia (because I can't skip this loop)
same old question: what can I do?
maybe insert the sd card in another phone and copy the 7.1.0.1 version of cyanogenmod and install through clockworkmod?
or there are any other solutions? (because at the moment i haven't another phone to try this way)
thanks for your answers
EDIT: sorry, I posted in the wrong section (I was sleepy and sure that I was posting on Q&A)... could anyone move this thread in the correct section? thanks