Related
Which is the most stable rom with all normal features maybe including flash and wifi?
POST ALL LINKS BELOW WITH COMMENTS PLEASE
At the moment the most popular ROM'S ARE:
Racht's http://forum.xda-developers.com/showthread.php?t=914513
and
Ponanvon's modified rom from nobodyAtall:
http://forum.xda-developers.com/showthread.php?t=964223
and Doixanh's frequenlty updated fantastic Froyobread
http://forum.xda-developers.com/showthread.php?t=1079463
Best ROM for X8 is here:
Download the 2.2.1 version from here. If download link doesn't work, look at 95 for a mirror.
The best ROM (IMO) is v0.11 HACKDROID by Ratch.
I'm willing to bet the MiniCM ROM for the X8 is good as well, but I haven't tested it yet.
Edit: I take that back. Apparently the MiniCM ROM suffers from random reboots.
Edit2: The MiniCM is very good. The battery lasts much longer than Racht's ROM.
i have installed 2.2.1 CM HACKDROID v0.12 (no prelinks) and works perfekt ...
chayenne1404 said:
i have installed 2.2.1 CM HACKDROID v0.12 (no prelinks) and works perfekt ...
Click to expand...
Click to collapse
did u get random reboot on your x8 with this rom??
cuecak said:
did u get random reboot on your x8 with this rom??
Click to expand...
Click to collapse
Yes if you kill aplication like Titanium backup or root explorer
Cyanogenmod 7, all of the ROM's available for the X8 are here ..
http://forum.xda-developers.com/showthread.php?t=914513
Enjoy, lol
Using hackdroid 0.11 and i think it its best as well.
best rom is comming : CM7
esirad said:
best rom is comming : CM7
Click to expand...
Click to collapse
Yeah! really excited for that
Until now the best rom I've tried, and the one I also have right now is miniCM port to X8 rom... can't wait for jerpelea to finish porting cm7 to X8, it will be awsome!
My favourite rom: Racht's 2.2.1 HACKDROID v0.12.
Im using the MiniCM Alpha3.1 and it is really good.
http://forum.xda-developers.com/showthread.php?t=964223
sincan01 said:
Yes if you kill aplication like Titanium backup or root explorer
Click to expand...
Click to collapse
i get the sd card unmounted automatically and then the phone shutts off...
i tried cm7-x8 and its very good but u cannot have ap2sd ...so reversed to original...
Not only you but for me it unmounts but doesn't reboot. It reboots in a totaly random way :/ Most often when I'm connected to USB. Talking about v0.12.
I tried floyo, hackdroid 2.2 & 2.3, minicm.
but none is stable, random reboot, bug & app2sd problm.
back to 2.1 again & again. stable but far too slow.
still waitin the best rom
MiniCM Alpha 3.1 is very good ROM. I'm using it now. I love the native App2SD.
Now testing: Racht's Floyo v.0.10 + Minicm 3.1. for the time being stable.
sincan01 said:
Yes if you kill aplication like Titanium backup or root explorer
Click to expand...
Click to collapse
I'm also using 2.2.1 0.12
I haven't had this problem; but, I do have problems with the camera. Occassionally when taking a photo it doesn't take the photo and the screen goes black. I have to press the home or back key a few times to get the screen back again.
There are some apps that won't install; but apart from that, I'm liking it alot.
He3aBuCuM said:
MiniCM Alpha 3.1 is very good ROM. I'm using it now. I love the native App2SD.
Click to expand...
Click to collapse
Me, too.
I use it for daily use now and it's stable for me.
Hey guys, ve recently found out that androids can soon play playstation games. but it requires android 2.3 and above. so for x8s running of android 2.3(eg Gingerbread) can they play the playstation games? and can they support FLVs ?(according to my knowledge flash player needs 2.2 or above)
and also ve found out that sony has stopped updating x8 OS, eclair 2.1 is the latest and last ( or something like that) but since we can change our x8 to other OS like 2.3s , why are so many people still so frustated ? (just want to understand more ~ im a newbie)
I wanna use gingerbread 2.3....HELP
What is cynogen mod 7?
what does flashing roms mean? Why?
What is quadrant?
What should i start with? - Rooted, Link2sd, 2.1.1.a.0.6, the last 3 digits of my Baseband version is 015,
so many stuff - Flashing roms~ JiT ~ xRecovery ~
Which step should i take first? can somebody tell me haha.. just tell me what to do and ill go and search and download and THANK YOU! =)
People say the 2.3 is still not stable yet. Camera not working, wifi not working(but i believe that some of the bugs are fixed).. Can anyone tell me the latest condition? What's not working?
sorry for my bad english. Detail explainations would be lovely!! TT
Hi
I dont know too much about playstation games to x8, but i dont think is so simply.
Flash player will not work in x8 because of cpu limitations
Quadrant: most popular benchmark app for android. See in market
Cyanogen mod is a good custom rom made by a xda member
Flash rom: install a custom rom
The most stable rom at the moment is the minicm 2.2.1 See that topic in x8 developement section. 2.3 is not too stable, has some bugs. Nor recommended for everyday use
Sent from my X8 using XDA App
Here you have custom rom's made by ratch's (thank's to him for his work)
http://forum.xda-developers.com/showthread.php?t=914513
you must have Xrecovery instaled when you want to instal na custom ROM, http://forum.xda-developers.com/showthread.php?t=878426 here is the thread for xRecovery, see instruction's how to instal it
and beforre you get xRecovery you must root your phone (easyest way with SuperOneClick) search on youtube and you will see how that work...
OK thanks so much and what's Jit? and according to my knowledge xrecovery is for backing up the original firmware we ussing?
nyirog said:
Hi
I dont know too much about playstation games to x8, but i dont think is so simply.
Flash player will not work in x8 because of cpu limitations
Quadrant: most popular benchmark app for android. See in market
Cyanogen mod is a good custom rom made by a xda member
Flash rom: install a custom rom
The most stable rom at the moment is the minicm 2.2.1 See that topic in x8 developement section. 2.3 is not too stable, has some bugs. Nor recommended for everyday use
Sent from my X8 using XDA App
Click to expand...
Click to collapse
thanks dude. btw what dya mean by not recommended for everyday use? r u trying to say that the longer a not-so-good stuff is used in our phones, the more dangerous it will be? and does minicm2.2.1 require anything other than xrecovery?
xiaofatty1 said:
OK thanks so much and what's Jit? and according to my knowledge xrecovery is for backing up the original firmware we ussing?
Click to expand...
Click to collapse
yes for backup your curent OS and restore new (2.2 or 2.3 android)
I don't know exactly what is Jit, i just know that has to do with performanceof your phone!
xiaofatty1 said:
thanks dude. btw what dya mean by not recommended for everyday use? r u trying to say that the longer a not-so-good stuff is used in our phones, the more dangerous it will be? and does minicm2.2.1 require anything other than xrecovery?
Click to expand...
Click to collapse
for every custom you will need xRecovery, because you restore (or flash) miniCM or ratch's 2.2 or 2.3
Jit= just in time
Android 2.1 translate the java code with precaching, but if you enable jit the code interpreter translating in real time, doesnt use cache. So it is faster
Sent from my X8 using XDA App
xiaofatty1 said:
thanks dude. btw what dya mean by not recommended for everyday use? r u trying to say that the longer a not-so-good stuff is used in our phones, the more dangerous it will be? and does minicm2.2.1 require anything other than xrecovery?
Click to expand...
Click to collapse
Not recommended for everyday use because relatively usually reboot, freeze, etc
Camera and FM radio doesent work also
Sent from my X8 using XDA App
Okay i wanna ask a question
Link2sd needs two partitions in ur sd..i have..One for normal usage and one for apps only.
I just installed cm7 rom and ive found out that it only uses the free space my first partition and the free space of my 1st partition becomes its "everything". so for my cm7 rom, theres no 2nd partition. how can i get link2sd work on my cm7 rom then?
2.3 roms use only fat32 partition. Backup data from sd and format sd as fat32
zieju said:
2.3 roms use only fat32 partition. Backup data from sd and format sd as fat32
Click to expand...
Click to collapse
okay maybe im not detail enough..
i was using stock rom 2.1.1.a.0.6,
and my sd has 2 partitions, both FAT32 , i call them :
a) for normal usage
b) for creating links using link2sd
so now i installed the 2.3rom into (a) and it becomes as if it only has one partition. so im just wondering can we use the partition tool shown in the xrecovery menu to solve this, to divide my (a) into 2 partitions.
Sorry for being noob =)
Hi guys,
Can u guide which rom is the best ever......
I need good rom with stable,perfomance,3d capabilities,less internal storage and least memory....
Please give tutorial as well thanx guys.....
((( RedDeviL ))) said:
Hi guys,
Can u guide which rom is the best ever......
I need good rom with stable,perfomance,3d capabilities,less internal storage and least memory....
Please give tutorial as well thanx guys.....
Click to expand...
Click to collapse
You Mean Big Internal Storage
2.3: Perfomance
GingerXperia Link
2.3: Stable
GingerDX Link
2.2: Stable & Perfomance
FroyoBread Link
2.1: Very Stable But Low Perfomance
2.1.1.Clean.0.0 Link
Choose What you want
Instructions Here
There is no "best ROM".
Every ROm has advantages and disadvantages.
GingerDx is good, but it will lag if you don´t iunstall supercharger or Juwe´s S97 script, and you'll need an unlocked bootloader for flashing the kernel, otherwise you´d have to flash all modules for stock kernel via CWM.
And GingerDX has also no included overclocking, so you would have to do it yourself.
All 2.2 ROMs are stable and fast, and the audio/video sync problem can be fixed, so you´d have to choose by looking at the screenshots and decide what looks better.
FroyoBread is one of the two(?) 2.2 ROMs with Theme Chooser from CM7, but it´s not working 100% with some themes.
So, just download some ROms, test them, and install another ROm if the first doesn´t suit you!
You could also have a look at the ROM reviews in the general forum.
Superuser.Angga said:
You Mean Big Internal Storage
2.3: Perfomance
GingerXperia Link
2.3: Stable
GingerDX Link
2.2: Stable & Perfomance
FroyoBread Link
2.1: Very Stable But Low Perfomance
2.1.1.Clean.0.0 Link
Choose What you want
Instructions Here
Click to expand...
Click to collapse
Thanx Guys for ur kindly help,,,,
anyway let me test out first then i'll inform if anything done wrong..
ginger xperia v10 very fast
Every rom rocks fast smooth stable if u have minimum number of apps i had 71 apps installed now i realised i should rather use it as a phone not a PC
Sent from my E15i using XDA App
Hi,
is there any ROM available now that supports WIFI-Theethering on the X8?
for 2.3 GingerCruzt rev 8 have good look and is very fast in hd games and Gingerxperia is very fast and lightweight.
for 2.2 i only like one and is the best,Froyobread.is very fast and stable with lot of options.
IROC_69 said:
Every rom rocks fast smooth stable if u have minimum number of apps i had 71 apps installed now i realised i should rather use it as a phone not a PC
Sent from my E15i using XDA App
Click to expand...
Click to collapse
hahaha you're right dude...
prefer to use gingercrutz,,,
Fast n Smooth
Fd xperience
http://forum.xda-developers.com/showthread.php?t=1089690
uninstall some apps that are useless to you then u will gain some speed
not to forget, apply tweaks on ur own also
______________________________________________________________________
X8
Fd xperience 2.1.0
AnTuTu score: 1722
I tried Fd xperience 2.1.0 few days back. This ROM is the slowest for me. I just shifted to other.
codfreak said:
There is no "best ROM".
Every ROm has advantages and disadvantages.
GingerDx is good, but it will lag if you don´t iunstall supercharger or Juwe´s S97 script, and you'll need an unlocked bootloader for flashing the kernel, otherwise you´d have to flash all modules for stock kernel via CWM.
And GingerDX has also no included overclocking, so you would have to do it yourself.
All 2.2 ROMs are stable and fast, and the audio/video sync problem can be fixed, so you´d have to choose by looking at the screenshots and decide what looks better.
FroyoBread is one of the two(?) 2.2 ROMs with Theme Chooser from CM7, but it´s not working 100% with some themes.
So, just download some ROms, test them, and install another ROm if the first doesn´t suit you!
You could also have a look at the ROM reviews in the general forum.
Click to expand...
Click to collapse
Hi would you please tell me how to fix the audio/video sync problem of Froyobread? I used to love the rom but gave it up for the video recording reason. Now using the stock rom I miss some of the features of Froyobread very much.
i the the feeling like the majority of xda-users are up for GDX
What is the best rom for battery life?
I'm thinking for a work use: read and write documents (Isilo, Documents to Go, Swype), internet (Gmail, Opera Mini, Maps, Barnacle Wifi, read news, etc). For me clearly the biggest battery drain is the 3G internet (according to BMW reaches 600 mAh, while Documents to Go does not exceed 200 mAh)
I am using v22 Froyobread with smartass, and the battery lasts me 10-20 hours. (I have a low screen brightness; and wifi, bluetooth, GPS off).
My question is mainly about the different roms, have several more efficient than others in the use of the battery? Do rom based in Gingerbread spend more than those based on Froyo? The union of a custom kernel and custom rom can be more efficient in the use of the battery?
Thanks and excuse my English
oooo yess I think Froyobeard
Introduction;
These are taken from other rom sources, i downloaded couples alot of it and take their kgsl lib out & test it
Visit my other mod's thread and take a look also
Feedback are gladly welcomed as long as doesn't contain negatives ones
For GB only
Links,
For Custom kernel,(Tested on Fde and alfs kernel and couples of other user used on nAa + minicm)
CM9.zipContain Kgsl lib from [X8/W8][ROM] CyanogenMod 9 - V02 Thread
For stock kernel, (Tested on Fde rom only!)
CM2.zip
Note:
All of these file in boot from alfs.zip i have taken permission from paul-xxx and
For stock kernel.zip, it's open sourced.
As Usual, Make backup before applying any tweaks.
Credit to paul-xxx for letting me use his lib, if you were using his and cook into your rom please link to his page and give a proper credit. Thanks
Gain 2D 5-10 and 3D 10-20 score only! At least it worked duh
Post result please
[Result] [Rom] [Kernel] Please feel free to leave comments.
I love suggestion but not Criticism
Reserved until testing it
and thnx
This will be great.....!!!
Yeah..great!! very powerfull thanks very much!!
Tried with GingerDX V22 on stock kernel but same results... perhaps GingerDX have already updated the library in the rom.
Do you know if is true ?
I tested pauls adreno libs on minicm and it did improve alot
Sent from my E15i using XDA App
it is actually not work. I use the adreno libs back.
chitoka said:
I tested pauls adreno libs on minicm and it did improve alot
Sent from my E15i using XDA App
Click to expand...
Click to collapse
where can I get those?
it actualy works on stock +10fps
Dexter_prog said:
where can I get those?
Click to expand...
Click to collapse
I took it directly from kang v2 zip thats pauls rom
Sent from my E15i using XDA App
wont flash with cwm or xrecovery???
Ive tried flashing this with cwm and xrecovery. Even though it does perform it in recovery. Neither of them changed the files in my phone. I Checked them when I turned it on. I even tried to move them with rom manager and it froze. Im using gingerxperia v22 with stock kernel. Can someone help figure out what Im doing wrong please?
Chadw1985 said:
Ive tried flashing this with cwm and xrecovery. Even though it does perform it in recovery. Neither of them changed the files in my phone. I Checked them when I turned it on. I even tried to move them with rom manager and it froze. Im using gingerxperia v22 with stock kernel. Can someone help figure out what Im doing wrong please?
Click to expand...
Click to collapse
This files are for custom kernel but look in here
http://forum.xda-developers.com/showthread.php?t=1484887
You will find a fix for stock kernel
Sent from my E15a using XDA App
ok i will check it out. thanks
work on stock rom and kernel ?
n1kolaa said:
work on stock rom and kernel ?
Click to expand...
Click to collapse
yep, there is two version of it..... stock and custom
Can't download! PM me with links!
Links dead bro :/
does this work on GingerDX v26-stock kernel???
Tried with minicm9 3.0.2, not working... What happens is that no images are displayed on screen after the kernel boot animation, only back light. Pressing the lock button does turn off the backlight though.
Sent from my E15i using Tapatalk 2
The long awaited, much tooted, GingerDXv023 is finally HERE! So, without much ado about nothing, let’s jump right in! Prior to flashing the new GDXv023, I was running my favorite ROM, namely miniCM7 on ADW EX, which I benchmarked on Antutu right before deleting it.
I'm running the following settings and apps on both ROM's:
CyanogenMod Performance Settings
CPU: min 320MHz, max 748MHz
COMPCACHE RAM: 26%
JIT: On
SURFACE DITHERING: On
16bit TRANSPARNECY: On
ASSET PURGING: On
VM HEAP SIZE: 48m
SWAPPER2
SWAP SIZE: 256MB
SWAPPINESS: 10The test was ran without turning off any processes or background services
minicm7 by whatwhatinthebutt2012, on Flickr After the miniCM7 benchmark, I flashed Alfs08 and GDXv023b, but, since Alfs08 was buggy on my X8 for some reason, I flashed Alfs07, which automatically solved the minor graphic performance glitches I experienced.
Then, to be fair, I quickly reinstalled from the PlayShop the same apps I had before, which included Aldiko, Ebookdroid, MXvideoPlayer, KhanAcademy, MobisleNotes, XiaaLiveRadio, and the standard pack of Google apps, including g+, Sky, and Maps.
With all the apps installed, Swapper2 running, and CyanogenMod settings at exactly the same parameters as above, I ran Antutu. Drum roll please…
gdxv023 by whatwhatinthebutt2012, on Flickr
Hmm… well, what did you expect, Samsung SII score? The benchmark tells the whole story. Or does it…
Just to be sure, I turned on XiaaRadio, signed into g+, surfed the web a bit, and then I checked my available RAM in RunningServices. Just to remind you, both miniCM7 and GingerDXv023b, were set to exactly the same parameters, and running the same exact apps and background services. To achieve this, I simply ran all my other apps at least once.
Although directly after boot I had 108MB's of available RAM, after I engaged the afore mentioned apps, I was back down to the regular 59MB of FREE RAM, which is exactly on par with miniCM7 on ADW EX, with Xiaa, browser, and g+ engaged.
So, does the new version by B.Jay and eagleeyetom live up to the hype? No, not really, but, that's what hype is for! Overall, though, Version023(b) is a very smooth and solid ROM, much smoother then most other ROMs for X8. Of course Fede's LauncherPro is a matter of taste. If you prefer ADW EX, as I do, or any other launcher, just install your baby, set it as your primary, go into Settings/RunningServices, click to select BackgroundServices, find and clear LauncherPro, and you're good to go!
The included ICS theme by AChep is very nice indeed, and I would recommend flashing the new GDX just for the theme itself!
Some of you might complain about the, now traditional, developers' names on the lock screen, but, don't fret and ask for their removal! Instead just download and use WidgetLocker.
Overall, the 23rd installment of GingerDX, now developed by B.Jay and eagleeyetom, is a hole in one...as long you're OC'ing, using a2sd, and at least Swapper2!
PLEASE POST Your COMMENTs PERTAINING TO YOUR EXPERIENCE WITH THE NEW GingerDXv023(b)! IF YOU HAD PROBLEMS or BUGS TO WHICH YOU FOUND SOLUTIONS TO, PLEASE DESCRIBE THEM HERE!
I see that,3Dscore is too low
yes
Hmm… well, what did you expect, Samsung SII score?
The benchmark tells the whole story. Or does it…
PLEASE DO NOT COMMENT THE ARTICLE! LEAVE ONLY COMMENTS AND PHOTOS, not questions, PERTAINING TO YOUR EXPERIENCE WITH THE NEW GingerDXv023(b)
What about the 2d score?
I find very annoying in testing GDX 023 to have the same 2d result I got in all CM7 roms, this being around 280. While some other guys posted a total diferent situation (claiming same conditions, thus having stock kernel, unlocked bootloader) and getting 400+ in 2d.
It is funny that in my stock rom, latest su and busybox I get 500+ score in the 2d testing by AnTuTu, I attach screenshots.
It is just the busybox - they had to revert it to a previos vbersion - 1.15.3 I think, while the latest is 1.19.4? or maybe just my device?
STILL , I trust that the future management by Eagleeye and B.Jay will improve this rom to what I expect. I know they are serios in taking this task, and they will do their best.
First screenshot - stock. second GDX.
Cheers
i dont know why you have a so poor result but look at my result.
I'm loving this Rom!
Here's my results at Antutu...
Triptamine said:
I'm loving this Rom!
Here's my results at Antutu...
Click to expand...
Click to collapse
ive got 1928 without sd card and you 1977 with sd card my score is better
iPapun said:
ive got 1928 without sd card and you 1977 with sd card my score is better
Click to expand...
Click to collapse
Yap, I've noticed that. You have some great scores, all of them above mine.
For me, the score of this rom is not as good as some other roms. But when I use this rom. It make me feel better and better
IMO all benchmarks done with SD are buggy because SD can change a lot final value and any SD have different flow...
Please benchmark your phone without SD test.
What about the battery life?
my antutu...
tankx for new devs...
I still can't post in the Development section, so I would like to leave here my big thanks to doixanh, B.Jay and eagleeyetom for their great work in this Rom. I'm having a really great experience with Alfs08 + GingerDx v023, so far the best performance I've had with my lovely phone.
Keep up the great work guys.
Triptamine said:
I still can't post in the Development section, so I would like to leave here my big thanks to doixanh, B.Jay and eagleeyetom for their great work in this Rom. I'm having a really great experience with Alfs08 + GingerDx v023, so far the best performance I've had with my lovely phone.
Keep up the great work guys.
Click to expand...
Click to collapse
Hello, first, I am a new user, an I want said sorry for my level of English.
I have Xperia x8 with GingerDX v.022 and I would like change my GingerDX v.023b, but I don't know if there any bug with wifi and kernel alf v8.
Thank you very much and a greeting!
PD: Sorry again for my level English
Thether wifi and multitouch on X8.
Hi guys, (sorry for my english) I've just load GingerDX v23 over my Floyo rel.
It seems work fine, but no multitouch nor Wifi Thether work.
Does it probably depend on kernel? ([email protected]#1)
I think I've to load "update_GingerDX-Alfs-addon.zip" with CWM recovery.
Is it wright? menu: "apply update from sdcard"?
Thanks a lot!
mailufficio said:
Hi guys, (sorry for my english) I've just load GingerDX v23 over my Floyo rel.
It seems work fine, but no multitouch nor Wifi Thether work.
Does it probably depend on kernel? ([email protected]#1)
I think I've to load "update_GingerDX-Alfs-addon.zip" with CWM recovery.
Is it wright? menu: "apply update from sdcard"?
Thanks a lot!
Click to expand...
Click to collapse
No...if your are using stock kernel ([email protected]#1) .. then you just need to flash the stock addons.zip from cwm recovery...
That contains the modules for (fake)multitouch ...
and i am not sure about the wifi tether if the addons contains it or not ...coz i am on alfs kernel ...and i got a different addon ...and almost everything is ok with Alfs v08+GDX v23 ...
BTW: stock kernel users should flash GDX v23b ... or else you might have a soft brick because of the busybox update...
lozzyl said:
No...if your are using stock kernel ([email protected]#1) .. then you just need to flash the stock addons.zip from cwm recovery...
That contains the modules for (fake)multitouch ...
and i am not sure about the wifi tether if the addons contains it or not ...coz i am on alfs kernel ...and i got a different addon ...and almost everything is ok with Alfs v08+GDX v23 ...
BTW: stock kernel users should flash GDX v23b ... or else you might have a soft brick because of the busybox update...
Click to expand...
Click to collapse
Hello, first, I am a new user, an I want said sorry for my level of English.
I have Xperia x8 with GingerDX v.022 and I would like change my GingerDX v.023b, but I don't know if there any bug with wifi and kernel alf v8.
Thank you very much and a greeting!
PD: Sorry again for my level English
Help, please
@miguelillo42: Yes you can update to ginger v23b as you have been using gingerdx v22 ..cos its faster and got updated to CM7.2.0-RC0 Hero nightly..so its much more smooth and got the ICS theme of Achep's...which is pretty cool... i am using it on alfs v08 GDX kernel... and i am not having any problems with wifi .... and for usb tethering (on alfs kernel) you just have to flash tethering.zip and add a line in build.pro ..read the details from here >> http://forum.xda-developers.com/showthread.php?t=1340861#
BTW ... my antutu scores = 2168 ..
with overclocked to 806MHz
using smartassV2 CPU governor
with my system info ...
need to change my SD card ASAP... would have got a much higher score with class 6 sd card
lozzyl said:
@miguelillo42: Yes you can update to ginger v23b as you have been using gingerdx v22 ..cos its faster and got updated to CM7.2.0-RC0 Hero nightly..so its much more smooth and got the ICS theme of Achep's...which is pretty cool... i am using it on alfs v08 GDX kernel... and i am not having any problems with wifi .... and for usb tethering (on alfs kernel) you just have to flash tethering.zip and add a line in build.pro ..read the details from here >> http://forum.xda-developers.com/showthread.php?t=1340861#
Click to expand...
Click to collapse
Thank you very much, I will update to GingerDX v.023b this weekend. I've heard about wifi, but I have a new question. Is it Usb Thethering? so I don't know that.
Thank you very much again. (sorry for my English)
thank you for this!