Increase stock, Alfs & nAa 2D & 3D score! - XPERIA X8 General

Introduction;
These are taken from other rom sources, i downloaded couples alot of it and take their kgsl lib out & test it
Visit my other mod's thread and take a look also
Feedback are gladly welcomed as long as doesn't contain negatives ones
For GB only
Links,
For Custom kernel,(Tested on Fde and alfs kernel and couples of other user used on nAa + minicm)
CM9.zipContain Kgsl lib from [X8/W8][ROM] CyanogenMod 9 - V02 Thread
For stock kernel, (Tested on Fde rom only!)
CM2.zip
Note:
All of these file in boot from alfs.zip i have taken permission from paul-xxx and
For stock kernel.zip, it's open sourced.
As Usual, Make backup before applying any tweaks.
Credit to paul-xxx for letting me use his lib, if you were using his and cook into your rom please link to his page and give a proper credit. Thanks
Gain 2D 5-10 and 3D 10-20 score only! At least it worked duh

Post result please
[Result] [Rom] [Kernel] Please feel free to leave comments.
I love suggestion but not Criticism

Reserved until testing it
and thnx

This will be great.....!!!

Yeah..great!! very powerfull thanks very much!!

Tried with GingerDX V22 on stock kernel but same results... perhaps GingerDX have already updated the library in the rom.
Do you know if is true ?

I tested pauls adreno libs on minicm and it did improve alot
Sent from my E15i using XDA App

it is actually not work. I use the adreno libs back.

chitoka said:
I tested pauls adreno libs on minicm and it did improve alot
Sent from my E15i using XDA App
Click to expand...
Click to collapse
where can I get those?

it actualy works on stock +10fps

Dexter_prog said:
where can I get those?
Click to expand...
Click to collapse
I took it directly from kang v2 zip thats pauls rom
Sent from my E15i using XDA App

wont flash with cwm or xrecovery???
Ive tried flashing this with cwm and xrecovery. Even though it does perform it in recovery. Neither of them changed the files in my phone. I Checked them when I turned it on. I even tried to move them with rom manager and it froze. Im using gingerxperia v22 with stock kernel. Can someone help figure out what Im doing wrong please?

Chadw1985 said:
Ive tried flashing this with cwm and xrecovery. Even though it does perform it in recovery. Neither of them changed the files in my phone. I Checked them when I turned it on. I even tried to move them with rom manager and it froze. Im using gingerxperia v22 with stock kernel. Can someone help figure out what Im doing wrong please?
Click to expand...
Click to collapse
This files are for custom kernel but look in here
http://forum.xda-developers.com/showthread.php?t=1484887
You will find a fix for stock kernel
Sent from my E15a using XDA App

ok i will check it out. thanks

work on stock rom and kernel ?

n1kolaa said:
work on stock rom and kernel ?
Click to expand...
Click to collapse
yep, there is two version of it..... stock and custom

Can't download! PM me with links!

Links dead bro :/

does this work on GingerDX v26-stock kernel???

Tried with minicm9 3.0.2, not working... What happens is that no images are displayed on screen after the kernel boot animation, only back light. Pressing the lock button does turn off the backlight though.
Sent from my E15i using Tapatalk 2

Related

Thanks to all DEV. Today, big day !

I would like to collecte here all post to say thank you very much for all great dev we have in our X10 Forum
Thx, Zdzihu, Jerpelea, DooMLoRD, TripNaver, 9Lukas5, tsuyo.kou, Wolfbreak, cobrato, rdannar, rendeiro2005, achotjan... and those i forgot forgive me...
Today, we can use Froyo 2.2 roms with Kernel k10.
That mean:
- Overclock capabilities
- FPS cap unlock (no more limited to 33fsp) and every thing so smooth....
- Quandrant score at 1300 pts
- more ram
- Wifi Working
- BT working
- GPS Working
- Proximity sensor working
- Led Flash Working
- Dual touch Working
- Flash 10.3 enable in Browser
- App to SD Working
- Camera
only Video recording at 720P not working... hope it can be fixed...
I'm sure our X10 will get some more tweak, and some surprise in near future...
But today is a leap forward... !!!
It's a Bird ? It's a plane ??? No it's our X10....
Thx all for the time passed
For more info go to dev subsection
here
and here
Have a good day
...
A french happy X10 Owner
+1 This is the first time I really enjoy using my X10. Thanks to the devs!
Sent from my X10i using XDA App
But .. battery drain! Other than that its smooth as hell!
Sent from my X10i using XDA Premium App
a1exander said:
But .. battery drain! Other than that its smooth as hell!
Sent from my X10i using XDA Premium App
Click to expand...
Click to collapse
Battery lasts forever when in 2G mode.
ooidort said:
Battery lasts forever when in 2G mode.
Click to expand...
Click to collapse
H*eell no! What ROM are you on? Are you on the 010 custom kernel?
a1exander said:
H*eell no! What ROM are you on? Are you on the 010 custom kernel?
Click to expand...
Click to collapse
Wolfbreak's 2.2, K010 kernel.
Taking photos in higher resolution than vga does now work?!
I think this will be the first custom kernel I will use. Now i just gotta figure out how to flash this.
Restoring backup of previous ROM. Even with patch I can't get wifi to work with CM Froyo of WolfBreak... Damnit, ROM was soo smooth and that stupid wifi didn't work.
I just wish there was a kind soul to tell me how to install Custom Kernel K10 on Wolf's ROM with Baseband 58.
Farhang said:
I just wish there was a kind soul to tell me how to install Custom Kernel K10 on Wolf's ROM with Baseband 58.
Click to expand...
Click to collapse
custom kernels only work with baseband .52
fiscidtox said:
custom kernels only work with baseband .52
Click to expand...
Click to collapse
I know how to change my baseband to 52 with FlashTool but I have no idea about the rest.
Farhang said:
I know how to change my baseband to 52 with FlashTool but I have no idea about the rest.
Click to expand...
Click to collapse
hmmmm wolfbreaks rom works on .54/.55/.58 right??
In this case you'd need to flash a baseband patch (the cm6.52 one) and then the custom kernel
fiscidtox said:
hmmmm wolfbreaks rom works on .54/.55/.58 right??
In this case you'd need to flash a baseband patch (the cm6.52 one) and then the custom kernel
Click to expand...
Click to collapse
yeah that seems the right way to do it
the patch's name is cm6bb49 by the way hehe
+1 @OP
I am still running a tweaked 2.1, but without the tools created by our wonderful dev's here I would still be feeling like i was robbed by SE.
Mr Rusch Gave me the ability to push framework so i could have a circle... sounds dumb and simple - and my wife still cannot understand why i am so happy with such simple MODs!!
Binary & Androxyde gave me Flashtool. snm, i am free to make as many mistakes as i know i will, safe in the knowledge i can flash a 2.1 anytime.
Z, legend, gave me recovery. now i can save my progress in the effort to make my x10 Xceptional.
Many others here deserve recognition, RoseRed, OmegaRed, DoomLord, X10iUser (my first line of help over @ AF) MyImmortal, PlayGunsta, Flo95.........................
Too many to mention, thanks all - I have learnt a great deal and contributed where i can, i am grateful for your time, skill and patience - and we all know you need lots of it, as we were all new once!!!! BOOKAI - you lot RULE
can someone write the procedure how to instal wolf rom with custom kernel on the bb 52 ?
From tot31:
1. Fresh install the stock rom with SEUS.
2. Root & install xrecovery using flashtool.
4. Flash the X10_52_ChangeBaseband.ftf using flashtool.
5. Reboot into recovery and wipe everything.
6. Install CM_6.1.3_[v006].zip.
7. Install CMFix_v6_v61.zip.
8. Install bb patch cm5bb49.zip.
9. Install 2.6.29.6 FX k010 froyo FXR busybox in xbin v06.zip (get it on the first page of WB's thread.
10. Reboot.
Problem SOlved.
Problem SOlved.

remove FPS Cap

write in build.prop
"debug.gr.swapinterval=0"
reference
http://forum.xda-developers.com/showthread.php?t=1066266
That doesn't work the kernel controls the fps not the build prop...
fiscidtox said:
That doesn't work the kernel controls the fps not the build prop...
Click to expand...
Click to collapse
Have you tried it on a gb Rom its for removing the gb cap
Sent from my LT15i using XDA App
rtblittlebrown said:
Have you tried it on a gb Rom its for removing the gb cap
Sent from my LT15i using XDA App
Click to expand...
Click to collapse
We still have the original kernel though unless you flash a custom of course
fiscidtox said:
We still have the original kernel though unless you flash a custom of course
Click to expand...
Click to collapse
Its for custom kernel gb
Sent from my LT15i using XDA App
Whos it does effect stock too, though it causes graphical glitches
Yeah I take back what I said it works on stock kernel, though I don't recommend it.
tried this on j's cm7 20b
achieved avg 82fps...
it makes a lot smoother but also makes lag...for me
ive attached a signed zip with modified init.local.rc
flash this with xrecovery
hope it works
Is there any potential danger doing this? I'd might try it on 2.2 for testing only :O
Sent from my X10i using XDA Premium App
maybe it causes battery drain...not sure, idk, lol.
backup your phone and give it a try
i think it doesn't affect in froyo
to utubo_sk8
please tell me
"write /sys/devices/virtual/bdi/179:0/read_ahead_kb 3072"
what mean?
oh....my bad....
it was sdcard speed improvement
ignore that thing...
i just forgot to delete that
thank you utsubo.
i understand.
np.
forgot to say, it's modified init.local.rc from j's cyanogenmod 7 v20b
it should not be used for other roms
utubo_sk8 said:
np.
forgot to say, it's modified init.local.rc from j's cyanogenmod 7 v20b
it should not be used for other roms
Click to expand...
Click to collapse
ok, i think it maybe use it written in other startup script.
thanks
your update.zip didn't work bro... still stuck with the 40 FPS limit..
hmm...strange...
tested and worked for me.
j's cm7 20b, almost clean install.
i think it works with latest...
flashable zip attached...this time, with my build.prop included
Anyone tried on stock kernel?
utubo_sk8 said:
hmm...strange...
tested and worked for me.
j's cm7 20b, almost clean install.
i think it works with latest...
flashable zip attached...this time, with my build.prop included
Click to expand...
Click to collapse
will test once my battery has more juice.
Tried on 2.1 optimized. No improvement on benchmarks and screen jitters badly. Also saw 4% bat drain in 10 mins, but that could have been down to trying to multitask wiv mod applied (wifi,BT,sync). If I can provide any further useful info let me know. B-)
Sent from my X10i using XDA App

Stock kernel for x8

For all of you guys who are so frustrated at flashing a new kernel then wanting to go back to stock. then having to flash stock rom or baseband just to get the stock kernel. well i have got the stock kernel and im sharing it with you guys. remember please do NOT mirror this
http://www.mediafire.com/?zb3zhdkodgy55ch#1
hit my thanks button if this helped you
if you have any trouble flashing or if your a noob just post your problems and ill help you get the kernel flashed
i was try gdx kernel + rom v14 but wifi doesn't work
so i try to flash stock kernel from yours but i had bootloop.
how is the right procedure to get back on stock kernel?just flash it with flashtool or there is another procedure?
inooz said:
i was try gdx kernel + rom v14 but wifi doesn't work
so i try to flash stock kernel from yours but i had bootloop.
how is the right procedure to get back on stock kernel?just flash it with flashtool or there is another procedure?
Click to expand...
Click to collapse
you should have done a reset mate thats why you got bootloop. thats the only bad thing when flashing the stock you need to fulll wipe before
how about if i restore stock kernel then i reinstall gdx rom+fullwipe but its still get bootloop.
have you try this before??
Sent from my E15i using XDA App
inooz said:
how about if i restore stock kernel then i reinstall gdx rom+fullwipe but its still get bootloop.
have you try this before??
Sent from my E15i using XDA App
Click to expand...
Click to collapse
i have tryed all ways and always works for me. theres nothing wrong with the stock kernel its 100% fine. maybe its something your doing wrong ? after flashing custom kernel. flash stock then asoon as you see "sony ericsson" tap the back button and it will go into xrecovery. then do a full wipe then install whatever rom you want to install or restore a backup
ok
i will try again soon.
thank you.
Sent from my E15i using XDA App
link its dead..can you uplad again?
http://forum.xda-developers.com/showthread.php?t=1254225
On the start of the post, there are the stock kernel links
Invalid or Deleted
Invalid or Deleted File.
The key you provided for file download was invalid. This is usually caused because the file is no longer stored on Mediafire. This occurs when the file is removed by the originating user or Mediafire.
SpyderX said:
X8 (E15) and W8 stock kernel:
Download link: http://www.mediafire.com/?zb3zhdkodgy55ch#1
Direct download link: http://db.tt/NI2WBnUp
Click to expand...
Click to collapse
There are 2 download link, if you got problem with MF, you can use dropbox, ok?
MF link didn't work. Dropbox is still alive.
stock kernel for x8a / E15a?
Hello! Someone could help me? I need the stock kernel for x8a / E15a? thanks
http://forum.xda-developers.com/showthread.php?t=1254225
check here
Sent from my E15i using xda premium
i cant understand, i rebooted to CWN then full wipe then power off then flashed stock kernel and still got bootloop:S
it also depends on ur rom. if u are still using a rom that require custom kernel after u flash stock kernel, it will bootloop.
for example, u are using mini cm by nAa with custom kernel, then u flash stock kernel while still using minicm by nAa, so u will enter bootloop.
what i usually do, while still in nAa minicm (example) n using custom kernel, i usually flash another rom that use stock kernel for example ( gingerxperia v18),then i turn off the phone, flash stock kernel, then im done
Sent from my XPERIA X8 using xda premium
ohh, thank you so much!
maliceomalice said:
it also depends on ur rom. if u are still using a rom that require custom kernel after u flash stock kernel, it will bootloop.
for example, u are using mini cm by nAa with custom kernel, then u flash stock kernel while still using minicm by nAa, so u will enter bootloop.
what i usually do, while still in nAa minicm (example) n using custom kernel, i usually flash another rom that use stock kernel for example ( gingerxperia v18),then i turn off the phone, flash stock kernel, then im done
Sent from my XPERIA X8 using xda premium
Click to expand...
Click to collapse
can you post a link to the 2 kernels you are talking about, my friend? Thanks
brock link
i cant send u the link as i cant use my pc for a few days
Sent from my X8 using xda premium

[REQ] Froyo with some custom Kernel.. (alfs 4 example) ??

Ok, I just realized (again, and until the next time) that Froyo Pro is the best choice for me..
But I will miss custom kernel.. I tried Alfs once, and it was all right but WiFi was not working at all. Copying Wifi libs from GDX didn't help
Can someone re-make Alfs kernel to make it work on FroyoPro? (some ramdisk changes and wifi fix)
I would be grateful... and I'm sure many others..
+1
Sent from my E15i using XDA App
+1............
It could be done but kernel should be made from cm6 core.because all kernels for x8 are made from cm7(gingerbread) core.like alfs,gdx,fxp kernel,nAa...so it would be hard,because fxp gave sources only for cm7 kernel,and most of our kernels are based on fxp kernel source.
Sent from my X8 using xda premium
nice. ....
Its preety easy.We just need to compile kernel from se source and everything should work even on eclair.
I will try and report.
Sent from my E15i using Tapatalk
oh god im waiting for Custom Kernel on Froyo sooooooooo much
and also if im on gingerbead and for example Alfs kernel when im by clockwork install custom zip with froyo i need to change kernel to stock right?
yeap, i love froyo pro and i also love alf's kernel, especially it's OC, i get by far the best results with it, fully stable 787 mhz with smartass v2 i just wish i could combine the 2.
yes yes yes +1 for a kernel for froyo
if we compile those kernels with the same Ramdisk that we have in Stock kernel, probably it should work better in Eclair and Froyo roms, right?
flash this in cwm and you will have working alfs + wifi on froyo pro
http://forum.xda-developers.com/showpost.php?p=20191172&postcount=490
Is this confirmed to work? TIA
Beans
Sent From The Arrow In My Knee
yes, i tried it everything works fine
Hefko said:
yes, i tried it everything works fine
Click to expand...
Click to collapse
WTF is this? you TRIED IT???? i am trying to stay calm so i will be brief....stop trying to scam people here making them trying stuff that just DONT WORK!!!!!
the rest of you reading this, DONT try this, it DOESNT work and will NEVER WORK!!
No, you are wrong, alfs kernel works fine with froyo pro + that fix which repairs wifi. If you want, i can make video with working kernel and froyo pro
Hefko said:
No, you are wrong, alfs kernel works fine with froyo pro + that fix which repairs wifi. If you want, i can make video with working kernel and froyo pro
Click to expand...
Click to collapse
sure make a video i would like to see that....

[FIX] N1 Kernel + Adreno drivers + WifiFix [Edit 2012/05/31: added another kernel]

This is Wifi fix for the ICS kernel by shaky156.
Please see the below link for the thread
http://forum.xda-developers.com/showpost.php?p=26159482&postcount=3730
Also, i added the latest adreno drivers into the zip. So the zip contains the following things
1. Latest N1 kernel from Shaky156 (I didnt modify this)
2. Recompiled wifi kernel module
3. Latest adreno libraries from Qualcomm
Please flash it from recovery.
Note:
It has been known to work with the latest Evervolv's Aosp TexasIce and AOKP for Passion roms..
No idea about any other roms. try it on your own risk..
Edit 31/04/2012:
I have made a modified version of new Evervolv kernel. Please check it out here..
http://forum.xda-developers.com/showpost.php?p=26782507&postcount=29
SUPER!!
It's super smooth! much better performance on TexasICS! I could find wifi signal but didn't try to login. would try it later.
I can confirm I have 100% working wifi after flashing this on texasice's ics rom....and OMG TEH SMOOTH.
glad to know
glad to know it works..
the smoothness is due to the HWA changes by Shaky156 and the Qualcomm driver.
please refer to this thread for more details..
http://forum.xda-developers.com/showthread.php?t=1655475
Is it for the New sense 4 rom ?
Sent from my HTC Nexus One using Tapatalk 2
xeloni said:
Is it for the New sense 4 rom ?
Sent from my HTC Nexus One using Tapatalk 2
Click to expand...
Click to collapse
That is what is was created for, however it works on any ICS Rom..and works very well too.
WIFI doesn't work on sense 4
Must i flash just after i installed the rom or wait until it booted ?
Wifi doesn't work with MIUI either . I try to turn it on, but it will not turn on...
I didnt release the wifi module when i released the kernel for test hence why it doesnt work on some roms, sense 4 doesnt have wifi working in first place
Sent from my HTC Desire HD
I think this thread needs to be moved to the Development section so other developers could review and provide their inputs.
fake_japanese_guy said:
This is Wifi fix for the ICS kernel by shaky156.
Please see the below link for the thread
http://forum.xda-developers.com/showpost.php?p=26159482&postcount=3730
Also, i added the latest adreno drivers into the zip. So the zip contains the following things
1. Latest N1 kernel from Shaky156 (I didnt modify this)
2. Recompiled wifi kernel module
3. Latest adreno libraries from Qualcomm
Please flash it from recovery.
Note: I tested this on my N1 with TouchRecovery.
Someone please test this and tell me if its working.
Click to expand...
Click to collapse
I flashed the kernel on AOKP Milestone 5 ROM and it's very smooth. Wifi works. I set max cpu to 1190Mhz, if set above that got bootloop. Min cpu 245Mhz with no SoD.
Flashed over BCM. Wifi is working. It's super smooth and stable.
Thanks
Sent from my icy cool nexus
taodan said:
I think this thread needs to be moved to the Development section so other developers could review and provide their inputs.
Click to expand...
Click to collapse
i didnt have enough posts to put this thread in the developments section.. thats why i posted it here..
LuckyJ26 said:
Wifi doesn't work with MIUI either . I try to turn it on, but it will not turn on...
Click to expand...
Click to collapse
sorry for your trouble.
This was never meant for MIUI roms.. works only on the latest Evervolv's Aosp TexasIce and AOKP for Passion roms..
Tested on BCM. Great Kernel!
Works absolutely great on BCM CM9.
Yeah, I confirm how well its working on the BCM 9. Awesome Job
Could someone post the kernel from Shaky's 0.4 beta?
mrhohoha said:
Could someone post the kernel from Shaky's 0.4 beta?
Click to expand...
Click to collapse
The kernel is attached on the first post on this thread.
Fantastic kernel it is too. Using it on BCM ICS and in conjunction with GreenPower free I'm getting fantastic battery life.
I've 55% left after 13.5 hours with 2 hours screen on usage. Half on 3G half on wifi. Very impressed.
Sent from my Nexus One using XDA
taodan said:
The kernel is attached on the first post on this thread.
Click to expand...
Click to collapse
Erm... are you sure this is the *latest* kernel? Its dated 18/5, the one that was Shakys initial release. The 0.4 beta is dated 24/5.
Or are there no updates to the kernel? On the dev thread Shaky says there are.
Sent from my Nexus One using XDA

Categories

Resources