[Q] Dualboot American Android - HD2 Android Q&A, Help & Troubleshooting and Genera

hi,
its driving me crazy..
I have an HD2 with MAGLDR 1.13.
In Nand i have a Android 2.3 CM7 Typhoon build.
Now i try to boot a American Android from SD.
I formated my SD card with fat32.
I replaced the rootfs.img with the one for magldr.. startup.txt too.
I start AD SD from MAGLDR...
I see American Android logo.
After a few minutes it bootes my typhoon Android from Nand. without a reboot.. just switching from american droid logo to typhoon bootlogo...
I cant get it booting the american android.
A Mdeejay_FroYo_Revolution from SD boots just fine after editing the rootfs.img.
Some ideas ?

maybe you can try an older build of it.i was able to boot older builds with mgldr 1.13 but after 21 july builds i'm unable to boot,too.

solved...
erased phone with task29...
installed magldr again.. works now

Related

[Q] Why oh why won't you flash, Windows Phone 7? (Flashing woes)

Hey guys.
I'm having some problems with my HTC HD2, flashing Windows Phone 7 builds that are based on YukiXDA's Windows Phone 7 build 7392 ROM.
Here's what I'm using:
1. MAGLDR 1.12
2. 2GB SanDisk MicroSD Class 4
3. Radio 2.15.50 (I have a European HD2)
The problem is, that the DFT LEO70 ROM is perfectly usable (ie. bootup and functionality), however whenever I load a WP7 7392-based ROM onto my HTC HD2, it gets stuck at the "HTC Quietly Brilliant" screen with the (i) (love icon) (windows icon) (phone icon) icons. It sits on that screen for hours, not even moving one bit.
What could possibly be the issue? I did have NAND Android (Gingerbread) installed with MAGLDR before I task 29'd the HD2 and then loaded a fresh radio (2.15), then a fresh MAGLDR 1.13 install and a flash of YukiXDA's 7392 ROM, but that didn't work so I rolled back to MAGLDR 1.12 and the DFT WP7 ROM, and that works fine...
Thanks for your help, and I hope to be smooth sailing once again on the Windows Phone 7 ship!
Cheers,
IcedCube
Have you tried wiping you SD card and trying again? Delete any partitions and format and then try again

[Q] Problems with HD2 (Android)

Since this week I have a really big problem with my HD2.
November last year I started to install Android on my HD2, first on the SD card and then finally on the Nand (everything went well). Last week I installed one of the latest version and working just fine for one week it stagnated. I had to remove the battery, because nothing worked anymore. After that I got only the white starting screen with HTC and then nothing…
First I run Task29 and flashed it, HSPL, Radio, MAGLDR and then ClockworkMod Recovery. The result was that sometimes the white HTC starting screen popped up, tough I kept the power button pushed down, and sometimes I could enter the MAGLDR. If I finally got into the MAGLDR and tried to recover a backup or try to do a fresh/new install. I formatted the SD with the Panasonic SDformatter, but it didn’t had any effect. Finally I flashed the HD2 back to WM6.5 and the HD2 start working again (not very well). After this I tried to install Android on the SD card, but now the HD2 keep stagnates in the white HTC starting screen and nothing else works..
ROM: Boyppc Ginger 2.3.4 HoneyComB V27, with 150Mb system partition and an 1Gb ext2 partition on the SD card.
Is this a software or a hardware problem? Or both?
Can somebody please help me, because I have no clue how to repair this???
Best regards,
Janha,

[q] hd2 stucked on android logo in first boot and stuck always in any rom!! Help

Hello my friend, I have a serius problem on my hd2. I try to mount an android rom (typhoon, ndt miui, ndt ginger, lady miui or energy) but after the gogogo in magdrl i'm stucked on the android logo.. but this is not all.. when i put a wm 6.5 or an android rom that work... my htc freezing in the lookscreen, and i can't unlock this problem with any working rom ( nexusHD ginger 3.1 work, and JW MIUI work, only this two android rom and any wm 6.5 rom work) please i neeed HELP.. now i give you the features of my phone and... HOPE! :/
so...
-my hd2 first mounted any android rom (on NAND)
-a week ago i mount wp7 on it // and work //
-two days ago i decided to return to android (i don't like wp7 :/ )
-but my sd card after the revive for android (format in primary fat32) doesn't work
-ok, i decided to use temporarily another sd (2gb) sandisk micro sd
-format, task 29, and all cleaning operation
-then reinstall all to the begin
-HSPL 4 (after i try to use HSPL2 and 3 but :/) radio 2.15, MAG, CWM 150mb, and install typhoon... stucked... on the android logo on black screen after gogogo...
-then i try to change rom, but
-when an android rom work... lookscreen doesn't work
-desperate i put an wm 6.5 and...
i can't believe it.. the lockscreen is stucked!!!!
HELP ME plz...
thanks to all
Hey man I have been having the same issues with my HD2 so BUMP!!!!
Almost the same thing here, or it's stuck at loading android or it won't install the rom (aborted, status 0)
I've got problems partitioning my sdcard as well (using CWM).
It stays at partitioning, please wait for hours.
so the problem is the partition..? i try to do an ext partition.. 1gb.. but the problem remained.. maybe i was wrong something.. please help me

[Q] [need help]stuck at DFT logo

I tried the oldest DFT WP7 rom (7004),but I could not boot into WP7.Stuck at DFT logo,I tried to put my microsd card and my sim card out of my phone but it did not work for me.
In addition to other rom such as Pdaimatejam_Rom(7740),HD2O (7720), Back to the future,It could not boot too.Same problem,Stuck at DFT or HTC logo before boot into WP7
I tried to task29 and installed magldr and flashed WP7 rom again in serveral times but it stuck at logo again and again.
My micro sd card is SanDisk 8gb and 16gb class4.It could flash wp7 rom and
boot correctly in the past.Today,It can't boot.
How to fix it back to normal to boot correctly into wp7 ?
Sorry,Has anyone known how to fix this problem?
Hi!
Sorry to hear that you have so many problems with your HD2 Am I to understand correctly that you are unable to install any WP7 release now? If that is the case here are a few ideas that have helped me and others in here:
1. Format your SD-card in a Nokia device or in Linux (I do that) and make a fresh install with the desired ROM (please delete SD mbr and activate extra Nand before installing!)
2. Try to flash a WM6.5 release onto you phone first (beware - this will uninstall magldr!)
3. Try to install WP7 without SD card and when you have booted and phone is running ok insert card and make a hard reset using magldr.
If I have misunderstood your question I'm sorry - Please let us know how things turn out for you!
/Anders
and check if HSPL 2.08 installed
Thank ! Anden1986 and dxdy for your answer.
1. Format your SD-card in a Nokia device or in Linux (I do that) and make a fresh install with the desired ROM (please delete SD mbr and activate extra Nand before installing!)
2. Try to flash a WM6.5 release onto you phone first (beware - this will uninstall magldr!)
3. Try to install WP7 without SD card and when you have booted and phone is running ok insert card and make a hard reset using magldr.
Click to expand...
Click to collapse
still stuck at DFT logo.
Even I restored hspl 2.08 to spl2.08 and changed it back to hspl2.08,I also stuck at DFT logo agian.
Normally,I can use wp6.5 and android (nand/sd).
I have problem with WP7 only.
then is microsd card problem... did you try boot without card? if WP7 already flashed just do hard reset and boot without card
Boot without sd card,I already tried,it don't work.
seems problem in ROM....

MAGLDR start booting from SD but switches to NAND halfway through.

I bought a (used) HD2 to replace my broken HD2. The old HD2 still had the original WM6.5 ROM and I was running AmeriCanAndroid from SD card (using RunDroid).
The "new" HD2 has MAGLDR v1.13 and has some Android flavor in NAND.
I've put the SD card in the new HD2, and told MAGLDR where it can find Android on the SD, and when I tell it to boot from SD it indeed starts loading AmeriCanDroid.
You always see two boot images. One static which changes after a while to an animated boot image. When it starts loading, I see the static image from AmeriCanDroid. But halfway through, where it normally switches to the animated boot image, it suddenly switches to the animated boot image from the Android in NAND. The a few seconds later, it turns out it has loaded the Android vesion in NAND instead of from SD.
What's going on here?

Categories

Resources