Related
What's the best WiFi interenet sharing solution? WalkingHotSpot, WiFiRouter,
JoikuSpot, ICSControl, Internet Sharing, or Tethering, etc. Is there another option? What's the advantages and dissadvantages of each?
What I would really like is to have a solution that allows me to configure how many people can connect and/or some kind of security, WEP, or anything at all. Is that possible?
I tried using the Internet Sharing Utility but I would keep getting a Verizon sceen saying I needed to sign up for a different service. I tried both WalkingHotSpot and WiFiRouter. WifiRouter seemed to keep my WiFi on all the time and allowed unlimited people to connect with no security, and WalkingHotSpot I couldn't get working for some reason, but it didn't look like you could set up any security with that either. Thanks for the help and time..
I don't think wifirouter can be beat, I have used it and prefer it.
I hear there is a bug in it that allows it to keep your WiFi turned on all the time. I heard there is a WEP feature and a feature that allows you to kick IPs off from using it. Do you know anything about this? Thanks.
rambrush said:
I don't think wifirouter can be beat, I have used it and prefer it.
Click to expand...
Click to collapse
I am not sure what you are talking about.
But you can set up a secure wireless network. It is only on if the switch is on so when you disconnect and turn switch off its done.
I have run the program for 10+ hours straight while on the road it kept the wifes laptop connected anywhere we have connectivity. I do run a amplifer and external antenna for those weaker areas.
Go check out the documentation at this link to see if the info is there?
http://support.wmwifirouter.com/documentation/
What version of the software are you using? I don't remember seeing any of those options with my version. It seemed to still have WiFi working even when the button was off, the icon looked like it was still working, but I didn't test it.. Thanks...
wmwifirouter is my favorite and my dad's by far
I've been searching on xda and google how to use CM tethering on my G1 to my Mac. I cannot figure it out for the life of me, that is why I am posting this. Is there a step by step for the mac? If so, can someone please help me out?
I'm not sure what you mean by CM tethering. Maybe Cyanogen Mod?
Anyway Tethering is pretty easy with a PC.
Root put on a tethering app. The last five ROMS I flashed on my MT3G had the app built in. Currently using Super-D. Should be the same for a G-1.
Open the app. By default it's wifi, although you can configure Bluetooth. But Wifi doesn't require pairing.
Just start the tethering app on the phone and it becomes an access point. Just like a wireless router.
So on the PC I search for wireless signals and find the one with my phones name and connect. I could add security if I wanted, but rarely do.
So if you can connect to a router with a Mac I guess you could tether.
I'm just assuming of course because I've touched a Mac for about 3 minutes in my life.
I don't know if that will help you at all. I'm assuming you've rooted and installed cyanogen? I think his apps come in an accessory pack or something. Cyanogen is honestly more complicated for me to install that Super-D or WG which have everything all in one for the most part. Sometimes they need ringtones.
Anyway do you have a 'Tethering App' on your phone? It looks like a green wedge.
I think OSX lacks the drivers for wired tethering (includes the settings option), but you might have luck with the wireless tethering app.
I have a Mac. Just use a wireless tether app. When you turn it on your phone will act as a wireless router. Get your Mac to scan for wireless networks and you should find one that says G1 Tether. Connect to it and you should be good to go. This is all I have ever done and I have never had any problems.
Thasro said:
I have a Mac. Just use a wireless tether app. When you turn it on your phone will act as a wireless router. Get your Mac to scan for wireless networks and you should find one that says G1 Tether. Connect to it and you should be good to go. This is all I have ever done and I have never had any problems.
Click to expand...
Click to collapse
So like I said, it should be just as simple as on a PC.
Assuming the OP has rooted his G1.
(Except you can't do it through USB)
yeah i always use the wireless tether for root users app at work, it works just fine for me =], in all of about 2-3 clicks isntant internet =]
same for me
I have a Mac. Just bought it like, 3 days ago. It was Tethering very well until 7 hours after I bought it, and now it doesn't connect to my G1. Any help?
I installed WIFI tether and barnacle tether. When I try to connect it to my IPAD it finds it but wont establish a connection. Anyone have any ideas why?
yrush71 said:
I installed WIFI tether and barnacle tether. When I try to connect it to my IPAD it finds it but wont establish a connection. Anyone have any ideas why?
Click to expand...
Click to collapse
are you rooted?
Steve Jobs says you're holding your iPad wrong. Must not be within five miles of an Android device for WiFi to work.
It is rooted. My friend at work can connect to it using her iphone but not my IPAD.
Does your iPad connect to any other WiFi?
I connected an iPad to my Android phone using Wireless Tether just yesterday. And while the iPad connected fine and showed plenty of signal, things were really, really slow. I had a good 3G signal on the phone, and it wasn't doing anything else. I downloaded and installed speed test on the iPad, which reported about 250 kbps both up and down.
As for getting the wifi connection working, I don't know what to suggest. I just went into settings, general and tapped on the SSID my Android is setup to use. I have access control turned on through Wireless Tether, so I had to then grant it access there as well.
Good luck.
That happened to my friend too. Try turning off WiFi on ipad, then turning back on. That worked for us.
i use wifi tether with my iPad all the time. works great. ekot831 is right, try turning the ipad wifi off and on again. I think mine gets stuck acquiring a new IP address. this always fixes it for me.
good luck!
Also, make sure you are using a wifi tether app that supports infrastructure and not just ad-hoc. Apple devices don't play nice with ad-hoc.
I've found several threads on the subject of Tethering a Xoom via BT and Wifi but I'm not having much luck and there's a lot of confusion about providers/Xoom versions/phones, etc. so rather than tag on to a thread I hope it's ok to start a new one.
I have the following:
Wifi Xoom (NOT the Verizon version, the one that just came out on March 27th here in the US)
HTC Hero GSM - completely unlocked (purchased in Europe). Running Android 2.1 standard update from HTC. I'm using the AT&T data plan but device is not an AT&T device at all.
I would like to see if I can Tether the Xoom to the phone and use the data connection I have on it. I understand that the Xoom's chipset doesn't allow for Ad-hoc networks. I've tried to do a Wifi Tether and although that works from my Laptop to my Phone the Xoom doesn't see the ad-hoc network. I don't believe there is any way for me to make the Wifi Tether work in Infrastructure mode so I don't think there is an option there (unless the Xoom can be modified somehow to see Ad-hoc).
So now I'm trying to use Bluetooth Tethering. I've tried both PdaNet and Wifi Tether (v2.0.7 and phone rooted via SuperOneClick). Both seem to start up fine and are running. I then pair the two devices but as many others have reported, I don't see any Tethering options on the Xoom so I'm stuck.
I've tried different orders of things... run Wifi Tether, pair, vs. pair then Wifi Tether, work with Airplane mode on vs. off, Wifi on vs. off, etc. but I never see that Tether option show up.
Anyone have this working with an HTC Hero GSM by any chance? Note that this is the Wifi-Only Xoom which seems to have different features than the Verizon 3G Xoom. Could it be that the Hero itself doesn't support this profile? Or can the Xoom be modified to force it to think the device is tetherable.
I'm not sure if rooting the Xoom would help any or maybe flashing a custom ROM like CM7 on the Hero would help any. I'd prefer not to have to do this but if someone has this working with my exact configuration I'd give it a try.
Any help would be appreciated.
From what i know, most tethering tech /apps are establishing a ad-hoc network' which the xoom isnt capable of...
I too have the Xoom wifi only version with a HTC rooted CDMA Hero.
As everyone knows now the Ad hoc will not tether with the Xoom infrastructure as of the latest.
I too get full bluetooth tethering signal from Wireless Tether, but like you the Xoom will "pair but not connect". As you, I am confused as to whether it is the Hero or the Xoom Wifi which will not connect to the bluetooth tether.
I suspect it is the Xoom Wifi, but would also like a definitive answer and better yet a viable solution.
I have no issue tethering my Xoom (Wifi model) with my Verizon Motorola Droid (1 Gen) over Bluetooth.
My Droid is full rooted with custom Gingerbread ROM (2.3.3) and Overclocked Kernel from ChevyNo1. His kernels are everything enable such as tethering and VPN. This might be the difference for some.
The one annoying thing is that everytime I enable the hotspot on my Droid, I have to go into the Xoom settings and enable tethering on the connection to my Droid. This also has to be done if either device goes not a range and brought back. I am trying to find a widget or a Tasker script to auto enable this.
Be sure to already start the wifi tether program on your phone (selecting the blutooth option on it) then bring up the blutooth settings menu on your xoom, just press and hold the little wrench you see to the right of your phone icon. it should bring up the tether option...just press that and you should see it conect via blutooth.
Just be sure to have the wifi tether app on your phone already on and set for blutooth. This works for me everytime (running the atrix) and shoujkd also work for your phone too.
Still no luck on my side with the Tethering on while I do the pairing and/or when I touch the wrench icon.
I'd like to understand more about how the Bluetooth profile is detected. Does my phone have to publish out a certain profile? Or does the Xoom have a list of device types that it knows are tetherable? I've read on another forum that it seemed like Motorola devices like the Droid worked whereas HTCs didn't seem to. I'm wondering if the Xoom detects the type of phone it's connecting to and decides whether it's tetherable or not... Anyone know? If this is the case maybe there's some file that can be tweaked on the Xoom to include additional devices or change the phone to broadcast out a different device name, etc. Maybe I should try changing my device name to 'Droid' or something.
Just guessing at this point....
I had the same issue with my droid, bluetooth tether is a pretty good alternative. I made a video of it, works with most phones with that create the Ad-Hoc. Check out video below to see the easy steps involved. Root on phone required.
Thanks for posting the video. This is exactly what I tried but does not work with my HTC Hero and my Wifi Xoom. I'm going to see if I rename my Bluetooth device name to 'Droid' to see if that makes any difference. I doubt it....
rosso said:
Thanks for posting the video. This is exactly what I tried but does not work with my HTC Hero and my Wifi Xoom. I'm going to see if I rename my Bluetooth device name to 'Droid' to see if that makes any difference. I doubt it....
Click to expand...
Click to collapse
I ran into a little bug, and it wouldn't recognize my droid. I had to unpair and turn on the bluetooth tether app. Then pair. The xoom then recognized the bluetooth tether. Hopefully this works, I apologize if it doesn't.
My wifi Xoom works perfectly paired with a CM7 Nexus One.
App: wireless tether
pd: key is the wrench
I tried renaming the bluetooth device name to 'Droid' but that didn't make a difference. I'm sure I'm following the same steps as in the video. Somehow the Xoom doesn't see the Hero as a Tetherable device...
Maybe there are some differences in Bluetooth chipsets?
Wifi tethering works with the Desire Z or the G2
I assume the network it creates is not an ad-hoc otherwise the xoom wouldn't have recognized it?
It's either not ad-hoc or you're using Bluetooth. You'd have to explicitly choose Bluetooth tethering in the Wireless Tether app so I assume you're using Wifi.
From what I understand some phones (the ones that are meant to be used as wifi hotspots) do broadcast in infrastructure mode rather than ad-hoc so I assume that's why it works for you.
Also of note is that Honeycomb only supports PAN tethering, and not DUN tethering.
Your phone also has to have "bluetooth tethering" turned on (however you do it, I don't have an android phone) so that the Xoom can discover the PAN bluetooth service.
Interesting. Something to read up more on. I'm using Wireless Tether to do the Bluetooth tethering but maybe I need something additional switched on. At least it's another direction to look at....
Seems like someone figured out how to get the Xoom to listen to Ad-hoc networks but that needs the Xoom rooted so I'll also research that. I prefer Bluetooth tethering since it uses less juice on the phone....
It does seem that "Wireless Tether" which is what I'm using on my HTC Hero, is running in PAN mode. If I look at the app's directory it has a pand executable, etc. and when I'm running the tether it is running pand in the process list.
Still, if I pair, even while it's running pand the Xoom still doesn't recognize it as tetherable. Grrr.... Wish I had another bluetooth client I could try to connect to see if it's the phone or the Xoom but I don't have anything else.
I'm wondering if it's because I have the Android 2.1 update for my Hero. Wireless Tether seems to support the 1.5 version of the Hero but doesn't mention 2.1. Maybe there is an incompatibility there...
Anyway, will continue to try to figure it out.
Rosso, your not on your own, I am still trying to figure this out on my hero running froydvillian. I have done the wifi ad hoc mod and thats working for me but BT tethering woudl be better, I will let you know If i ever find a solution.
I did see someone else loaded CM7 for the hero and then BT tether worked, but CM7 seems to have been pulled for the hero at the moment due to stability issues.
I have a droid eris (verizon's cdma hero) and I have the same exact problems but I'm on cm7and using wireless tether. I can get the to devices and connect via tethering but 5 seconds after that my phone reboots.
Just picked up a wifi-Xoom for my wife over the weekend. Tried to get it connected to my phone (HD2) as a wifi hotspot and was having problems (the ad-hoc problem). The xoom wouldn't even see the hotspot. I am running AmeriCanDroid 0413 build and it has wifi tether v. 3.0-pre11. So I switched back to winmo and still nothing, then I tried going to Darkstone SuperRam 1.5 (my fallback build). It has an older version of wifi tether, I think 2.06 or something like that and got the xoom to connect. I haven't had a lot of time to fool around with it, but it was able to get a network connection. Maybe you could try an older version of the wifi tether? I haven't experimented with the BT tethering yet. I don't want to root the xoom yet, maybe when my wife is tired of it.
/edit
Just checked the wifi-tether website and there is a new version of wifi tether and it supports softap which may help the xoom recognize the wifi hotspot.
Hi, I have just managed to get my hero bluetooth tethered to my htc hero.
The process I followed was basically what everyone has said:-
download wireless tether i am using 2.0.7
1. start bluetooth on phone and xoom (make discoverable)
2. Do not pair the devices yet
3. start up wireless tether, select bluetooth and tap to start the actual service
4. go back to bluetooth on your xoom and pair the devices
I then got an icon I had not had before and when I tapped the wrench I got the option to tether.
As for wifi tether your phone needs to put out infrastructure wifi for the xoom to see it, if its ad-hoc, you'll need to do the wifi mod so that he xoom sees adhoc
although as stated the new version of 'wifi tether' (which just seems to be the new name for the 'wireless tether' app) may fix that? but doesn't seem to support bluetooth as the 2.07 version does
I have looked but can't find a solution. I have the transformer 101 tablet and can't get it to connect to my tmobile mytouch 4g. I'm posting in this forum because I can get the tablet to connect to my computer so I figure it has something to do with the phone. I'm trying to get a bluetooth connection so I can tether. I don't use much data but I'd like to know I could do it with the tablet and make a connection if wifi not around. I have rooted and installed stock Android 2.3.4. I don't know much about Bluetooth or WIFi but from my readings I'm think it might have something to do with PAN BT profile. If this is the case, is this a software thing? Is their a ROM that has the PAN BT profile? I like some of the Sense Apps so I'd like to stay with a stable Sense ROM. I'd like to be able to stream Navigator when I need it or brows the internet while waiting in the parking lot for my husband. Yes I can do it on the phone but my eyes are bad and a larger screen is so nice. I don't come anywhere near a GB of data each month...just want to be able to connect when sitting in my car and give myself a bigger screen.
I must be missing something here. Why not install wifi tether or one of the myriad sense 3.5 ROMS in the dev section that ALL have a working wifi hotspot?
Well my thinking may be wrong on how Bluetooth and wifi work but I was thinking there isn't always a wifi connection, but there would always be a signal with bluetooth connecting the tablet to the phones 3G and 4G. I was hoping that, if tablet paired to phone when traveling, I could use the bigger screen on the tablet and navigation would run like on the phone. I'd like to use the tablet as much as possible and I'm thinking that in the country there wouldn't be any wifi hotspots. Sorry if I've got this all wrong. Most of the time I would use wifi and I've only used that at home or work....never hotspots.
As far as ROM's go, I was thinking of the Virtuous Affinity or Unity ROM's but didn't know if they were going to give me the bluetooth connection I was looking for. I can't remember but thought I read that you couldn't do some things in 3.5 that you could do with ealier versions. Do you know why the tablet can't connect with the MyTouch? Is it the PAN BT profile. I know the tablet doesn't do adhoc. Sorry but I did try to read up on it. I was just thinking of the message I see. They are paired but they wont connect. I click on the bluetooth device but it doesn't connect
I've tried to understand what your asking but I'm still confused. Are you trying to make a wifi hotspot off your phone, then connect your transformer to the hotspot, to use the internet?
If I helped, give thanks, if you please.
........Death before dishonor........
Team inferno
Leader
d2dthetide said:
Well my thinking may be wrong on how Bluetooth and wifi work but I was thinking there isn't always a wifi connection, but there would always be a signal with bluetooth connecting the tablet to the phones 3G and 4G. I was hoping that, if tablet paired to phone when traveling, I could use the bigger screen on the tablet and navigation would run like on the phone. I'd like to use the tablet as much as possible and I'm thinking that in the country there wouldn't be any wifi hotspots. Sorry if I've got this all wrong. Most of the time I would use wifi and I've only used that at home or work....never hotspots.
As far as ROM's go, I was thinking of the Virtuous Affinity or Unity ROM's but didn't know if they were going to give me the bluetooth connection I was looking for. I can't remember but thought I read that you couldn't do some things in 3.5 that you could do with ealier versions. Do you know why the tablet can't connect with the MyTouch? Is it the PAN BT profile. I know the tablet doesn't do adhoc (point one). Sorry but I did try to read up on it. I was just thinking of the message I see. They are paired but they wont connect. I click on the bluetooth device but it doesn't connect
Click to expand...
Click to collapse
There a couple things wrong with this post 1) the tablet does support and use AD-HOC tethering. I know that for a fact because I've had people connect to my home network via my tablet just to show off. Pretty embarrassing making them use my Android Tablet to connect their iPad to my home network. 2) If you are just wanting to use your tablet as a navigation unit, use the Google maps while you are connected to WiFi to find directions to where you want to go, then press the navigate button. It'll work w/o a data signal. I've done it several times. 3) you don't need blue-tooth to bridge the Tablet to the phone. This doesn't work like Blackberries and the playbook. You can use the Wi-Fi Tether .apk from Google's source code to do just that. [http://code.google.com/p/android-wifi-tether/downloads/list] 4) There has to be a blue tooth stack installed on the Phone, and on the Tablet that will allow them to share blue tooth connections for Internet. I have TF101 and have yet to find such a BT stack.