[Q] my x10 gt dead when flashing gingerbread - XPERIA X10 General

Any pro can help me here????my phone only show sony ericsson in the boot then x10 dont do anything ==

Download ftf file from gingerbread thread and install through flashtool. Took me 10th min to upgrade
Sent from my X10i using XDA Premium App

how to flash?? my x10 stop at SE logo when boot ..

before flashing u need to learn how to read. no, seriously, u think u r the 1st with this problem? go to threads and READ

Related

Xperia x10 Endless Reboots after final 2.1 update

I updated my SE Xperia x10 to 2.1 but it can't open..When I enter my pin code after a while it freezes and restarts..What can i do??
Try first using flashtool from x10 development section. Its a computer program. Their should b a how to guide built in the flashtool post to help u. Post back if your still stumped after u attempted flashtool.
Sent from XDA Premium from my X10a rooted running 2.2.1 CM Rom from Rendeiro2005
or try flashing the update again using seus and doing a factory reset...
Ok thanks ! Now it works peftect.

heeeeeeelp, after custom kernel!!

Hi! I put jerplea custom kernel into CM 6.1.3 via xrecovery, when i reboot the system doesn't work! i try to enter in xrecovery but it doesn't work!! how can i repair my x10??
thx in advance
Dario
Hook up the phone to the pc to the sonu ericsson software called seus. Hit the repair option.
If that doesnt work, try flashtool which is a pc program too which is in the x10 android development section. There r howto guides in there if u dont know how to use it. Flash the firmware with the baseband u want for the compatible ROMS want to run on the phone.
After thay u have to reroot the phone. Sorry about this but u gotta start over.
Sent from XDA Premium from my X10a rooted running 2.2.1 CM Rom from Rendeiro2005
Voelker45 said:
Hook up the phone to the pc to the sonu ericsson software called seus. Hit the repair option.
If that doesnt work, try flashtool which is a pc program too which is in the x10 android development section. There r howto guides in there if u dont know how to use it. Flash the firmware with the baseband u want for the compatible ROMS want to run on the phone.
After thay u have to reroot the phone. Sorry about this but u gotta start over.
Sent from XDA Premium from my X10a rooted running 2.2.1 CM Rom from Rendeiro2005
Click to expand...
Click to collapse
I'm going to copy and paste this reply to everyone who messes up their phone with a custom kernel. We are going to get LOTS of these kind of threads soon...
There are already a lot of ppl complaining that they "broke" their phone and dont know the reason, because they are to "lazy" to read the OP for installing custum ROMS and kernals.
Agreed, reflash with SEUS, I had to do that twice, when I was noob.
Sent from my X10i using XDA Premium App
ok fires you must be to back to the original software 2.1
step 1
download Sony Ericsson updater
after download set up in your pc
step 2
connect the usb cable in your pc
step 3
open the sony ericsson softwer update and choos x10 phone and next
step 4
now turn off your phone
step 5
connect you phone and Click on the button right
now turn on your phone
You will notice that the computer knows the phone a new way
After the piece
You will notice that the program moved to the next step and descends Software
This step will take approximately 10 minutes
I am sorry for bad English
i am not trying to be a smartass here, but ppl should really read OP more carefull. you cant go wrong if you backup everything in xrecovery before aplying new update or rom. i tried several of the new custom roms and they worked all. just stick to instructions and everything will be fine

[Q] Extreme phone brick

i need help! i bricked my phone while installing rom using XRecovery.
I tried using the PCC but it says that my update failed.
sometimes it shows a warning triangle with a yellow exclamation mark and telephone symbol. What does that means?
I hope you guys can help me..
Relax... i had been brick my phone more hard than you brick your phone before, and my phone still alive since now..,now tell me what situasition of you phone now?.. can you enter to xrecovery?
Sent from my X8 using XDA App
okay, i was installing a rom and then the phone died automatically..
i reboot the phone but it stucked at the sony ericsson logo and can't go to xrecovery..
i've tried to restore my phone using PCC i tried to updae the phone for about more than ten times but it all fails.
so, now i'm just hoping that someone would tell me how to restore my phone.
relax i have 5 hard brick
use flashtool and follow proper installation
or Here
Cheers,
XtremePeople
Which 1 should i download? what's the difference between all the rom images?
X8 Shakira E15i_2.1.1.A.0.6_generic.ftf
X8_1.6_clear.ftf
X8_2.0.2_China.ftf
SE x8_2.1_rus.ftf
DokaponKingdom said:
Which 1 should i download? what's the difference between all the rom images?
X8 Shakira E15i_2.1.1.A.0.6_generic.ftf
X8_1.6_clear.ftf
X8_2.0.2_China.ftf
SE x8_2.1_rus.ftf
Click to expand...
Click to collapse
X8 shakira E15i 211A06 generic. Ftf.... flash its with flash tool
Sent from my X8 using XDA App
okay thanks for the help..
i've restored my phone
just 1 more question, do i need to root my phone again?
DokaponKingdom said:
okay thanks for the help..
i've restored my phone
just 1 more question, do i need to root my phone again?
Click to expand...
Click to collapse
yes. that one u flash is stock and unrooted.
DokaponKingdom said:
okay thanks for the help..
i've restored my phone
just 1 more question, do i need to root my phone again?
Click to expand...
Click to collapse
I want to tell you 2 news... good news and bad news.., good news your can restore your phone again.... and the bad news its the ftf file your dowload its not a baseband 015 and you must change the baseband again....
Sent from my X8 using XDA App

I want the new ICS rom, but where do I start?

How do I install it? I swear I've searched....I can't really find a thread that tells me how to unlock, install clockwork, and flash this rom. I've never had a problem finding this information with my old phone.
Any help would be appreciated.
This is a good start:
http://blogs.sonymobile.com/wp/2012...e-for-unlocked-2011-xperia-smartphone-models/
Try using your eyes. As I write this the top thread in the Arc dev area covers this.
If you can't glean the info you require from that, then maybe you should avoid beta software.
Sent from my Arc via transwarp beacon.
Can someone say what different partition tables actually means. Is this something permanent or will a flashing a stock ftf fix the partition tables again? I want to install on my arc and other have done it with success but SE says you shouldn't.
From SE dev site "You must be using Xperia™ arc S, Xperia™ neo V or Xperia™ ray, running the latest Xperia™ software release (which is 4.0.2.A.0.42). Please note that you can’t use the original Xperia™ arc or Xperia™ neo, as they have different partition layouts."
there maybe a reason se state that,if they say no thats mean no,if you ended brick your phone just dont blame se and dont ever thinking of getting in here,just wait for new release if i were you..
from my ARC using I.See.Ass
I don't get it either. Why is there not a thread that just tells you how to unlock, install clockwork, and flash roms?
All I see is stuff about fast boot and have no idea what that is.
Sent from my LT18a using XDA App
p00rcakemix said:
I don't get it either. Why is there not a thread that just tells you how to unlock, install clockwork, and flash roms?
All I see is stuff about fast boot and have no idea what that is.
Click to expand...
Click to collapse
... FAIL. Talk about lazy...
There's a search button. Use it. And even if there wasn't...
It's the FIRST thread RIGHT at the top of the forum: http://forum.xda-developers.com/showthread.php?t=1304634
Bootloader unlocking and frequently asked questions [FAQ] (paid method, works on ANY phone):
Bootloader unlocking (free method for unbranded phones ONLY):
ClockwordMod:
http://forum.xda-developers.com/showthread.php?t=1437840
brian85 said:
How do I install it? I swear I've searched....I can't really find a thread that tells me how to unlock, install clockwork, and flash this rom. I've never had a problem finding this information with my old phone.
Any help would be appreciated.
Click to expand...
Click to collapse
Bro.... I use 2 day to walk trough most post at XDA Xperia Arc/s forum to learn how to unlock/root/flash/fastboot/recovery it mean u need to really look hard to get wat u want
So far i know
1. [Firmware] 4.0.2.A.0.62 unable to root so need to flash back 4.0.2.A.0.42
- use flashtool v0.6.7.0 & firmware 4.0.2.A.0.42
2.[Unlock] Follow this SONY OFFICIAL way to unlock ur phone http://unlockbootloader.sonymobile.com/
3.[Root] Use flashtool v0.6.7.0 just ONE CLICK wil do
4.[ROM] find ANY ROM at forum, they mostly will told u use which "Kernel" & also provided links (most of their modify Kernel should with a recovery function like clockwork)
- Im Using this arconium ICS v1
after fastboot Kernel into your phone then u can access recovery function at the boot of your phone, then u can flash main ROM from the recovery mode
5. if got any thing happen and make ur phone brick just do the whole step again

X8 stuck at sony ericsson logo, please help

Hi,
I've been running XGin 4 on my X8 for some time now with no issue at all and I recently decided I'd like a change so I had a look on the cyanogenmod website to get cm7.1 as referred by friend. I tried following one or two guides on how to install it and failed every time. I gave up and left it a few days. I turned my phone off last night for the first time since and now it can't get past the Sony Ericsson logo screen. I can't boot into xRecovery or anything so I've no idea what to do. I know most of you in here can probably help me and it would be greatly appreciated.
P.s. If it wasn't the attempted installs that killed my phone, it could have been a busybox updater that I downloaded from the market?
You can use seus or pcc if you can go into flash mode. In seus click repair and follow the steps.
sent from my x8 using xda premium
Probably this guide will help you...
http://forum.xda-developers.com/showthread.php?t=1011071
sent from my x8 using xda premium
Darkostica said:
Hi,
I've been running XGin 4 on my X8 for some time now with no issue at all and I recently decided I'd like a change so I had a look on the cyanogenmod website to get cm7.1 as referred by friend. I tried following one or two guides on how to install it and failed every time. I gave up and left it a few days. I turned my phone off last night for the first time since and now it can't get past the Sony Ericsson logo screen. I can't boot into xRecovery or anything so I've no idea what to do. I know most of you in here can probably help me and it would be greatly appreciated.
P.s. If it wasn't the attempted installs that killed my phone, it could have been a busybox updater that I downloaded from the market?
Click to expand...
Click to collapse
Wassup bro
unfortunately, that your lovely x8 now is on soft-brick condition,,
no worry bro only the small matter..what do you have to do now is,,
1 = get a flash-tool, you have to flash back your x8 to stock rom,,
flashtool -> http://forum.xda-developers.com/showthread.php?t=986697
then you have to find out the shakira stock rom ftf file to flash back using flashtool
2 = SEUS, you try it before?? so easy,, let SEUS repair your x8 problem
after you finish all the step above,, the you have to root back your x8..
your x8 still on stock kernel?? unlock your bootloader??
fell free to visit this thread
-> http://forum.xda-developers.com/show....php?t=1436924
Have a Luck bro!
Thank you so much! That thread is a life-saver! And now I finally have CWM which I could never install properly before! Thank you!
the phone now turns on but my wifi doesn't work and I can't access my sd card from my computer anymore?
Darkostica said:
the phone now turns on but my wifi doesn't work and I can't access my sd card from my computer anymore?
Click to expand...
Click to collapse
What method did you use??
sent from my x8 using xda premium

Categories

Resources