HTC Desire Z – GB MR – 2.6.35 kernel source code - G2 and Desire Z General

http://developer.htc.com/
Released today ! Hooray!

rr5678 said:
This IS DEVELOPMENT!!!
Click to expand...
Click to collapse
Umm, its negligible. To start a thread in development you need to have created something for other people to test and use. Posting a link to a website which developers probably check every day doesn't really count.

cjward23 said:
Umm, its negligible. To start a thread in development you need to have created something for other people to test and use. Posting a link to a website which developers probably check every day doesn't really count.
Click to expand...
Click to collapse
I am in agreement here; this should not be in dev as it is just a link to the kernel released, no actual development is being done. It belongs in general. Plus, you guys need to stop bickering damnit! Time to start this thread with a clean slate.

So can an overclock kernel be developed from this and will it be?

mike102871 said:
So can an overclock kernel be developed from this and will it be?
Click to expand...
Click to collapse
We all ready have kernels based on this source. Have had for a while, it just released on a different website
"rmk40: People keep mentioning the kernel source on htcdev.com. They didn't release anything new that wasn't already on developer.htc.com."
--http://twitter.com/rmk40/status/101152290647449601
Do Androids dream of electric sheep?

cjward23 said:
We all ready have kernels based on this source. Have had for a while, it just released on a different website
"rmk40: People keep mentioning the kernel source on htcdev.com. They didn't release anything new that wasn't already on developer.htc.com."
--http://twitter.com/rmk40/status/101152290647449601
Do Androids dream of electric sheep?
Click to expand...
Click to collapse
Ok. Well this is the kernel used on the ota gb on my g2. Can you please point me to the kernel that will oc my ota gb g2 and not break anything. Like wifi etc. Please....

mike102871 said:
Ok. Well this is the kernel used on the ota gb on my g2. Can you please point me to the kernel that will oc my ota gb g2 and not break anything. Like wifi etc. Please....
Click to expand...
Click to collapse
I assume that you are rooted. I'm not sure what kernels are currently working on gb ota. I've been using sense for a few months so I'm not up-to-date with what is working on stock rooted roms.
This one might work http://forum.xda-developers.com/showthread.php?t=1180071
Do Androids dream of electric sheep?

Related

1.6/2.0/2.1 with the kernel that HTC just released?

I was wondering why its been so quite after HTC released the new kernel for the Sprint Hero, I thought that was the missing link that was needed for complete 1.6/2.0/2.1 roms?
It hasn't been quiet.
Also the kernel that HTC released needs to be ported to 2.6.29 to fully work with 1.6+.
All this info is on the forum & easily obtainable.
gu1dry said:
It hasn't been quiet.
Also the kernel that HTC released needs to be ported to 2.6.29 to fully work with 1.6+.
All this info is on the forum & easily obtainable.
Click to expand...
Click to collapse
I just thought we would see some 1.6/2.0/2.1 releases now that the kernel was released, that's all
There's been 1.6+ releases for a while...
Let me elaborate a little here:
This kernel that was released is not a magic bullet, it allows us to see what code needs to be changed to get the correct Kernel to run these newer versions. It also lets us make any performance changes we can find.
All of the changes need to be put into the current kernel source,making it a .29 or whatever we need.
It has been fairly quite, we aren't seeing tons of Roms being thrown out to the market, thankfully. Our devs are taking all the time they need to make sure everything works and is stable. We should see some big stuff happen in the next week or so.
gu1dry said:
There's been 1.6+ releases for a while...
Click to expand...
Click to collapse
Yea but not completely working, which I thought the new kernel would fix?
kyrumo71 said:
Yea but not completely working, which I thought the new kernel would fix?
Click to expand...
Click to collapse
gu1dry said:
the kernel that HTC released needs to be ported to 2.6.29
All this info is on the forum & easily obtainable.
Click to expand...
Click to collapse
/thread....
Kcarpenter said:
Let me elaborate a little here:
This kernel that was released is not a magic bullet, it allows us to see what code needs to be changed to get the correct Kernel to run these newer versions. It also lets us make any performance changes we can find.
All of the changes need to be put into the current kernel source,making it a .29 or whatever we need.
It has been fairly quite, we aren't seeing tons of Roms being thrown out to the market, thankfully. Our devs are taking all the time they need to make sure everything works and is stable. We should see some big stuff happen in the next week or so.
Click to expand...
Click to collapse
Good to know, I guess I'm like a kid in the candy store, thanks for educating me on the kernel process.
Modaco's 2.2 has the customized kernel in it now.. read the front page of the Hero forum for the link..
its very nice..
tyrnight said:
Modaco's 2.2 has the customized kernel in it now.. read the front page of the Hero forum for the link..
its very nice..
Click to expand...
Click to collapse
Yea that's what I'm rocking right now, I'm just impatient for a fully funcional newer OS

Droid Eris 2.6.29 kernel source available

It seems that HTC developer page has the source code for the 2.6.29 Droid Eris (codename Desire) kernel available. Maybe this could be usefull for you developers!
Regards.
http://developer.htc.com enjoy all!
It seems that HTC developer page has the source code for the 2.6.29 Droid Eris (codename Desire) kernel available. Maybe this could be usefull for you developers!
Regards.
Click to expand...
Click to collapse
does this mean us leakers can root now?
Sent from my Eris using the XDA mobile application powered by Tapatalk
No it doesn't but it does mean a lot more roms for root users
Some people are having trouble seeing it on the site. I upped it to mediafire. Here ya go...
http://www.mediafire.com/file/dznyhidymim/desirec_2.6.29_8a03cb9a.tar.bz2
and here is there direct link http://member.america.htc.com/download/RomCode/Source_and_Binaries/desirec_2.6.29_8a03cb9a.tar.bz2
This is what we need to get OC'ing working right?
Can we flash this to our current roms?
dmullins80 said:
Can we flash this to our current roms?
Click to expand...
Click to collapse
This is already in all the current ROMs. Now we can start using modified kernels that allow for OC and the like.
PHP:
Yeah that's what I was thinking by I didn't know for sure. But why couldnt we OC before if we already if we already had the kernal?
mmm.......
dmullins80 said:
PHP:
Yeah that's what I was thinking by I didn't know for sure. But why couldnt we OC before if we already if we already had the kernal?
Click to expand...
Click to collapse
I don't think you understand what this is. This isn't a rom or a patch or an update. This is the source code to the Eris's kernel. We didn't have this before, we were waiting on HTC to release it.
Do a google search for linux kernel to get a better idea of what a kernel is.
dmullins80 said:
PHP:
Yeah that's what I was thinking by I didn't know for sure. But why couldnt we OC before if we already if we already had the kernal?
Click to expand...
Click to collapse
The runnable form of the kernel can't be changed (much very easily, at least). Having the source code renders making real changes to the kernel feasible.
very nice. i cannot wait to come back from vacation to see our phone finally OC'd
YESS! Finally
So this wont help find a vulnerability for us leak users?
It may help find a hole in 2.1 for leakers... But dont get your hopes up to high.. The 1.5 source didn't yield much in the way of root when it was released. Im more excited to possibly see OC on the Eris!!
I'm not a leaker, but there's a thread in General that talks about the incredable being rooted from just the source. That's where you'll probobly find a hole.
jadesdan said:
I'm not a leaker, but there's a thread in General that talks about the incredable being rooted from just the source. That's where you'll probobly find a hole.
Click to expand...
Click to collapse
I've searched, and heard nothing about the incredible being rooted. Where did you read that? Link?
irascible said:
I've searched, and heard nothing about the incredible being rooted. Where did you read that? Link?
Click to expand...
Click to collapse
stay on topic...
this is good news!

[REQ] CM7 NIGHTLY For GT-I9000 PORT

Recently there's has been a release of Cyanogen Mod version 7 for GT-I9000
http://forum.cyanogenmod.com/topic/15275-gt-i9000-cyanogenmod-7-we-love-bugs-version-20110205/
When the 6.1 beta came out for this device I remember Eugene fixed up a sweet kernel for us that fixed various issues, such as button mapping and kernel panics, which allowed us to have CM on T959 devices
Just letting everyone know it's out, and that if any nice devs would like to build a kernel to fix some issues we can have this on our devices!!!
I AM NOT ASKING FOR AN ETA OF ANY KIND. I'M SIMPLY ASKING IF THERE IS A DEV OUT THERE THAT WOULD LOOK INTO THE RECENTLY RELEASED CM7 AND SEE IF THERE'S ANY PROBLEMS WITH IT THAT CAN EASILY BE FIXED, LIKE KEY MAPPING.
Maybe someone should try the latest GT-I9000 CM7 beta with the last kernel that eugene released for CM on T959? I would try, but I don't want to reconfigure my perfect setup right now
P.S. if anyone uses CM on Vibrant, remember to use sombionix's SD mount fix so that your internal SD mounts properly!
PSP_Hacker said:
Maybe someone should try the latest GT-I9000 CM7 beta with the last kernel that eugene released for CM on T959? I would try, but I don't want to reconfigure my perfect setup right now
P.S. if anyone uses CM on Vibrant, remember to use sombionix's SD mount fix so that your internal SD mounts properly!
Click to expand...
Click to collapse
Same I think I'll wait for a new nightly to pop up or Eugene to work his magic and create another fix, it shouldn't be that hard... just reconfigure the old fix to work with the new code?
I forgot to mention that Team Whiskey is working on an AOSP build for the Vibrant! I read it first in the OP for Bionix-v thread when it was first created:
also, as soon as we get our hands on the source code, we'll begin a full aosp build compiled from source.
Click to expand...
Click to collapse
And right now the OP has been updated with this:
Coming Soon:
Multiple high quality themes will soon be available for Bionix-v. Team whiskey has also been working hard to bring you a stable 2.2.1 and 2.3 rom. Expect a stable 2.2.1 to drop soon...very soon. Other very exciting goodies coming in the near future. Don't worry, we haven't forgotten about you!
Click to expand...
Click to collapse
I really like that "...very soon." part.
PSP_Hacker said:
Maybe someone should try the latest GT-I9000 CM7 beta with the last kernel that eugene released for CM on T959? I would try, but I don't want to reconfigure my perfect setup right now
P.S. if anyone uses CM on Vibrant, remember to use sombionix's SD mount fix so that your internal SD mounts properly!
Click to expand...
Click to collapse
The problem with that idea is that Eugene's new kernel is a FroYo kernel, not Gingerbread (which is what CM7 is). I'm sure Eugene or TW could get a good Gingerbread build working though.
MorphiusFaydal said:
The problem with that idea is that Eugene's new kernel is a FroYo kernel, not Gingerbread (which is what CM7 is). I'm sure Eugene or TW could get a good Gingerbread build working though.
Click to expand...
Click to collapse
So? Eugene can get access to 2.3 source just as CMod and TW have...
bobbbb said:
So? Eugene can get access to 2.3 source just as CMod and TW have...
Click to expand...
Click to collapse
Jeez, stop demanding this and that. These are the kind of posts that developers HATE to see.
Samsung hasn't released froyo source much less gingerbread. Pretty sure krylon360 and others are using nexus s/sdk and maybe even writing drivers themselves to get ginger working.
anthonys2r said:
Jeez, stop demanding this and that. These are the kind of posts that developers HATE to see.
Click to expand...
Click to collapse
I'm not demanding anything kid, I was just stating initially that CM7 came out, just in case some devs hadn't noticed. And i was replying to someone who said Eugene couldn't do anything because he only works with 2.2 source? Something ridiculous like that...
I ran CM7 a couple days ago... only thing it really needed was the Vibrant modem.
new kernel isn't going to do much.
scrizz said:
I ran CM7 a couple days ago... only thing it really needed was the Vibrant modem.
new kernel isn't going to do much.
Click to expand...
Click to collapse
WUT??????????!!!!!
How does it work?!?!?!? What's broken so far? What's working?
scrizz said:
I ran CM7 a couple days ago... only thing it really needed was the Vibrant modem.
new kernel isn't going to do much.
Click to expand...
Click to collapse
Did u just flash the i9k rom or what?
Sent from my SGH-T959 using XDA App
bbm21 said:
Did u just flash the i9k rom or what?
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
flash the one from the i9000 and
just extract the modem.bin from the Vibrant modem you choose
next
place it in your sdcard.
then after you have CM7 installed.
open terminal emulator and type this:
Code:
su
dd if=/sdcard/modem.bin of=/dev/block/mtdblock5
number one rule for CyanogenMod: don't ask for ETA's.
smackdown85146 said:
number one rule for CyanogenMod: don't ask for ETA's.
Click to expand...
Click to collapse
I don't think that applies since Cyanogen just started that none of the CMSGS work is "official"... Therefore, asking for ETAs aren't against the rules, just annoying
smackdown85146 said:
number one rule for CyanogenMod: don't ask for ETA's.
Click to expand...
Click to collapse
No one is asking for ETA, i just asked if there is a dev out there willing to help with the probable key mapping problem that would occur if us vibrant users were to flash this rom...
bobbbb said:
I'm not demanding anything kid, I was just stating initially that CM7 came out, just in case some devs hadn't noticed. And i was replying to someone who said Eugene couldn't do anything because he only works with 2.2 source? Something ridiculous like that...
Click to expand...
Click to collapse
I think if you read a little closer, I was commenting that the 2.2 source that was leaked to Eugene is about as useful to CM7/GingerBread ROM development as the 2.1 source was to 2.2 ROMs.
I can get data on JL5
Demiurgic said:
I can get data on JL5
Click to expand...
Click to collapse
All the buttons are reversed though, correct?
no not switched only my list and back buttons work. This really should be labeled a tech demo. Of course it's full of dragons, just go read the known bugs over at the cyanogen forums. It works - fun to play with cyanogen7 but thats it - don't expect this to be a fully working daily driver.

Where are all the ROM GOODNESS!

I am new the to the GT10.1.. Just wondering why there are no custom roms or anything for it yet?!?
Sorry if I missed the thread telling me why!
jm6001 said:
I am new the to the GT10.1.. Just wondering why there are no custom roms or anything for it yet?!?
Sorry if I missed the thread telling me why!
Click to expand...
Click to collapse
Questions or Problems are not Development
Please post in the correct forums and use the search
Moving to General
So few people have the tablet at the moment, suspect that's the hold up. It still hasn't been released to the rest of the US.
How much can you do without the source code?
There's not much you can do without the source. The xoom only got it's first rom a few days ago and it does not have all that many changes. Once we get the kernel source, we should start seeing some custom kernels(for overclocking and stuff) but that's about it.
smaskell said:
There's not much you can do without the source. The xoom only got it's first rom a few days ago and it does not have all that many changes. Once we get the kernel source, we should start seeing some custom kernels(for overclocking and stuff) but that's about it.
Click to expand...
Click to collapse
That's what I figured. I'm sure you can change around a few small things, but for the most part didn't expect what I'd consider a true "custom rom."
Will probably have to wait for Ice Cream Sandwich.
I think we can thank google for that as they have chosen not to release the AOSP for honeycomb. And who knows when samsung will release the kernel source. I would have thought they would have released it by now.
xavierdylan said:
I think we can thank google for that as they have chosen not to release the AOSP for honeycomb. And who knows when samsung will release the kernel source. I would have thought they would have released it by now.
Click to expand...
Click to collapse
I'm not exactly sure what the law is but they will have to release it eventually.. The linux kernel is under the GPL, which means that any modifications to it are, without question, also under the GPL. Therefore, they have to make their version of the kernel open source at some point. Does anyone know how long they have to do so?
Does any one know if the retail version of the galaxy tab have an unlocked boot loader and if can be rooted? cant seem to find that info ne where. if it has a locked bootloader you can forget abt custom roms till the bootloader can be unlocked

I897UCKK4 Source Code is out.

I'm preparing to be flamed, but I figured I might as well create this thread. Now I know many of you know this, along with the i896 source, is out, but there wasn't a thread for it and the i896 one had issues, so here . Hopefully we can get some development going for those of us that want *shutters* Audience Chip drivers, along with the many features that are present in the i9000 roms.
Just search KK4 on here: https://opensource.samsung.com/index.jsp
nygfan760 said:
I'm preparing to be flamed, but I figured I might as well create this thread. Now I know many of you know this, along with the i896 source, is out, but there wasn't a thread for it and the i896 one had issues, so here . Hopefully we can get some development going for those of us that want *shutters* Audience Chip drivers, along with the many features that are present in the i9000 roms.
Just search KK4 on here: https://opensource.samsung.com/index.jsp
Click to expand...
Click to collapse
Doesn't bother me anymore since now ICS is doing great.
But, if really want to stick with GB(usually MIUI and CyanogenMOD).
I would like:
a.) The Audience Chip thingy.
b.) Battery life.
Fate-Silver said:
Doesn't bother me anymore since now ICS is doing great.
But, if really want to stick with GB(usually MIUI and CyanogenMOD).
I would like:
a.) The Audience Chip thingy.
b.) Battery life.
Click to expand...
Click to collapse
What? I'm not making anything. I was informing the community (those who didn't know) of the source code.
nygfan760 said:
What? I'm not making anything. I was informing the community (those who didn't know) of the source code.
Click to expand...
Click to collapse
Yea, I know.
I just want to tell AT&T/Samsung is SLOW for their firmware codes sharing... too stingy...
Fate-Silver said:
Doesn't bother me anymore since now ICS is doing great.
Click to expand...
Click to collapse
yea I been onICS for 24 hours now ,, its great , but nothing special I see very few differences in anything , except I am missing all of the features I m use to on GB .
imo dotn believe the hype , the only 2 things I like about my current ICS set up is sixstring kernel allows me to OC higher then on sammy rom (not higher then cm7 tho) and the launcher is pretty cool but still not as nice as on the gnex .
Eventho its 2.3.5 I welcome source of KK4
eventho Im 2.3.6 (i9000 base )
I'm looking forward to the more refined kernels the source code release should bring around. Those features we've been missing will now be possible.
nygfan760 said:
I'm preparing to be flamed, but I figured I might as well create this thread.
Click to expand...
Click to collapse
Why? There is already a thread created in General. This is where searching comes in handy.
Red5 said:
Why? There is already a thread created in General. This is where searching comes in handy.
Click to expand...
Click to collapse
Saw the thread. It is a discussion thread about the firmware, this thread is to alert people of the actual source code, so we can get new kernels and stuffs Also, aren't most source code threads posted in here? At least for Froyo, and i896 GB, I believe they were.
Audience chip support was already extracted from the I896 gingerbread source kernel. It is available in the i9000 captivate corn kernel. Specifically gave me thanks for being able to introduce audience tip finally.
If you would like Audience support in any other kernels just contact the developer of corn.. A few months ago
TRusselo said:
Audience chip support was already extracted from the I896 gingerbread source kernel. It is available in the i9000 captivate corn kernel. Specifically gave me thanks for being able to introduce audience tip finally.
If you would like Audience support in any other kernels just contact the developer of corn.. A few months ago
Click to expand...
Click to collapse
I know, I know, I have been running it for a while now.
but im surprised that kk4 was final release. had time-stamp issue.
but now if we can get a unbranded kernel, we can have a complete unbranded rom with the ATT removal mods i posted while back.
TRusselo said:
but im surprised that kk4 was final release. had time-stamp issue.
but now if we can get a unbranded kernel, we can have a complete unbranded rom with the ATT removal mods i posted while back.
Click to expand...
Click to collapse
I'm pretty sure that problem only happens when you put AT&T software on an i896. I can't say for sure though because both my cappy's are canadian. Anyways I don't think ts a problem with the phone per se.. I think its a network thing. There is no time stamp issue for people on the AT&T network that I know of.
KK4 Source has been available since around Christmas. Some of the I897 kernel devs have been trying to compile a kernel from source but have been running into issues with the kernel not booting which is why you haven't seen any yet.
erbsmokah said:
I'm pretty sure that problem only happens when you put AT&T software on an i896. I can't say for sure though because both my cappy's are canadian. Anyways I don't think ts a problem with the phone per se.. I think its a network thing. There is no time stamp issue for people on the AT&T network that I know of.
Click to expand...
Click to collapse
Its a network AND software issue. Either they can fix the problem though the network, (its been done before) or you can de-compile the MMS.apk and change a line of code to fix the problem.
Kyuta Syuko said:
KK4 Source has been available since around Christmas. Some of the I897 kernel devs have been trying to compile a kernel from source but have been running into issues with the kernel not booting which is why you haven't seen any yet.
Click to expand...
Click to collapse
that was the kh2 rogers i896 source that they were having trouble with.... or are they having trouble with kk4 also???
TRusselo said:
Its a network AND software issue. Either they can fix the problem though the network, (its been done before) or you can de-compile the MMS.apk and change a line of code to fix the problem.
that was the kh2 rogers i896 source that they were having trouble with.... or are they having trouble with kk4 also???
Click to expand...
Click to collapse
He is a kernel dev but yeah I hope that isn't the problem.
TRusselo said:
that was the kh2 rogers i896 source that they were having trouble with.... or are they having trouble with kk4 also???
Click to expand...
Click to collapse
Both JSmokey and I haven't been able to get a kernel compiled from the KK4 source that we had gotten around Christmas. Though JSmokey said he did have a working kernel before, but isn't certain what he did to make it not work anymore. I've even tried to compile a stock kernel per the included instructions with no luck...
Kyuta Syuko said:
Both JSmokey and I haven't been able to get a kernel compiled from the KK4 source that we had gotten around Christmas. Though JSmokey said he did have a working kernel before, but isn't certain what he did to make it not work anymore. I've even tried to compile a stock kernel per the included instructions with no luck...
Click to expand...
Click to collapse
Same here, there must be something missing. Pulling a dmsg doesn't give much help, something about wanting sh in /system/bin (I think).
I have moved over to cyanogenmod 7 for now, waiting for cm9. Lots to tinker with there.
boog said:
Same here, there must be something missing. Pulling a dmsg doesn't give much help, something about wanting sh in /system/bin (I think).
I have moved over to cyanogenmod 7 for now, waiting for cm9. Lots to tinker with there.
Click to expand...
Click to collapse
.... no our original 2.3 kernel dev has given up
Sounds like the only way to get bln is to go to 2.2 or i9000.
Wdustin1 said:
.... no our original 2.3 kernel dev has given up
Click to expand...
Click to collapse
Maybe we can ask DG for help. I know he has moved on a long time ago, but recently he came back and helped with ICS kernel development. If he could help us getting KK4 kernel compiled from source, I am sure we will see a lot more ROM development going on.

Categories

Resources