So i flashed my HTC HD2 with stock ANDROID 2.3.2.
Now my question is this,how can i flash a rom ,for example : ''imilka's Gingerbread Sense v07'' ?
Thanks.
do you use mgldr or clk? for mgldr you go in mgldr menu-ad recovery-wipe data/factory reset. Then ad recovery-advanced-wipe dalvik cache. then connect phone to pc go mgldr menu-usb flasher and make cwm partition as indicated in the op of chosen rom using this tool http://forum.xda-developers.com/showthread.php?t=1090783. then ad recovery-install zip from sd-choose zip from sd...then find your rom's zip in sd.after installation finishes press back button and reboot.
Sorry ,but im a beginner in flashing.i used magldr.Can you give me a more details explenation please ? i cant go to magldr menu.how can i do it please?
power off your phone. then power on it but hold power button down until mgldr menu comes.
yes mgldr menu comes up ,but then it boots android fast.i can acess the menu.
ok magldr menu is up.now how to flash a rom ?
have you downloaded your rom and put it in sd? have you downloaded nand tool kit that i gave link?
i download and installed that app.i erased the android.when i turn the phone on,only the aMAGLDR menu comes up.How can i install again ?
is your hd2 eu or tmous.
Its HTC HD2 eu
then you have to use sd-ext partition.have you done this? know how to do?
No i didnt...If you would explain how it would really really be appreciated.Also when i try to flash ''LEO70_ROM'' (windows phone rom for hd2) via USB Flasher ,it gives me this error-
An error has occurred
Read below for more information
Error Description: send partition data failed
Info: .\RSPL\RSPL.cpp (1283)
Error Description:
Info: .\RSPL\RSPL.cpp (1085)
Oh and also when i try to flash something like a RUU or .NBH , the phone goes to black screen with HTC logo and loading bar below it.It stays at 0%.
forget about damn winmo!! sense roms are too large so you have to use sd-ext partition. you can do it in pc using g-parted or minitool partition magic. but i'll give you directions to make it in mgldr. in mgldr menu go ad recovery-advanced-partition sd card-2048mb(ideal for sense 3 )-0(swap)
when you do this sd car will be erased so dont forget to make a backup.
in order to put your stuff to sd again: ad recovery-mount and storage-mount usb storage. then your pc will see your phone and you put them in sd.
dazkyl said:
Oh and also when i try to flash something like a RUU or .NBH , the phone goes to black screen with HTC logo and loading bar below it.It stays at 0%.
Click to expand...
Click to collapse
maybe the files are corrupted. try doing these using nand toolkit.
I dont have ad recovery.i only have : boot AD SD , boot AD NAND , USB MASSStg , USB Flasher , USB TTY , AD Hardreset , Tetris , Services , Reset , Powerdown.
isn't your mgldr version 1.13?
Yes it is.I really want to solve this problem !
Whenever i try to install a ruu or something with HD2 toolkit , my phone goes to black screen and htc logo and a loading bar below.it stays at 0% :/
then do it this way:connect your phone to pc,choose usb flasher in mgldr,you'll see usb falsher.......usb. now open hd2 nand toolkit in pc,choose mgldr partition,choose system partition size(on left)custom,cachesize 5mb, click repartition (on left bottom),in popup menu write 180 mb.after it finishes if you don't see ad recovery again,we'll start a few steps before.
Related
hi,
MAGLDR doesn't recognize my sd card . i can't use usb mass storage , AD SD => CWM . apparently all the roms i want are released az ZIPs ...
is there a fix for that ?
Are you using magldr 1.13? If so you need to use the new CWM 1.3 partitions which now installs the partition onto NAND, so to use CWM you need to boot into the AD Recovery option from menu and not Boot AD SD. There is also no need to copy files to root of sd card.
There is a problem with magldr usb mass storage, but if you boot to CWM, select mount and storage and the usb storage you can copy perfectly.
hi
my problem is with the bootloader screen. After installing magldr 1.13 i could not start the ppc in bootloader mode. i have tried many key combinations and etc.. but it is still starting with magldr after a short white htc screen. So now i cannot load any official or custom winmo firmware. None of the android nand fw are working. Now i only can use winphone 7 with limited abilities.. Can anyone tell me the way to solve this and go back to original rom?
thanks
exxx80 said:
hi
my problem is with the bootloader screen. After installing magldr 1.13 i could not start the ppc in bootloader mode. i have tried many key combinations and etc.. but it is still starting with magldr after a short white htc screen. So now i cannot load any official or custom winmo firmware. None of the android nand fw are working. Now i only can use winphone 7 with limited abilities.. Can anyone tell me the way to solve this and go back to original rom?
thanks
Click to expand...
Click to collapse
When you say you can not start in bootloader, bootloader is started by turning the phone off, holding in the vol down button only and turning on the phone.
The phone should not even get to the white htc screen.
If you get into the tri-colour screen you can get back to a stock rom to start again.
waspsl said:
When you say you can not start in bootloader, bootloader is started by turning the phone off, holding in the vol down button only and turning on the phone.
The phone should not even get to the white htc screen.
If you get into the tri-colour screen you can get back to a stock rom to start again.
Click to expand...
Click to collapse
Yes exactly thats what i m doing. But it passes to magldr. I even have reset from the red button at the back but no way to bootloader
@ClydeB1 : so i have to install the new CWM using the USB Flasher and it'll boot from AD Recovery ? thats good news i guess ...
will it let me install ZIP roms ? also i have a 512Leo . why would i (or anyone) want to partition NAND ?!?
MTN_HD2 said:
@ClydeB1 : so i have to install the new CWM using the USB Flasher and it'll boot from AD Recovery ? thats good news i guess ...
will it let me install ZIP roms ? also i have a 512Leo . why would i (or anyone) want to partition NAND ?!?
Click to expand...
Click to collapse
Yes, install the appropriate cwm partition by going to usb flasher and running daf.exe. Then the phone will reboot to magldr, select AD recovery and you can then flash zip roms or updates, backup etc etc etc.... I have a 512 device also, so no problems.
I guess one of the reasons for running recovery off NAND is that not all users could get the sd based recovery to work.
exxx80 said:
hi
my problem is with the bootloader screen. After installing magldr 1.13 i could not start the ppc in bootloader mode. i have tried many key combinations and etc.. but it is still starting with magldr after a short white htc screen. So now i cannot load any official or custom winmo firmware. None of the android nand fw are working. Now i only can use winphone 7 with limited abilities.. Can anyone tell me the way to solve this and go back to original rom?
thanks
Click to expand...
Click to collapse
I have the same problem here. I tried to return from my NAND Android Builts to a Windows 6.5 ROM. But after Flashing, the reboot got stuck at the logo. I tried flashing over and over again, different WinRoms, reflashed MAGLDR and even tried a combination with HSPL. nothing seems to work. I dont pass the logo, cannot enter MAGLDR or load a normal build. I kinda run out of all my magic. anyone got any suggestions?
fastscorpion2010 said:
I have the same problem here. I tried to return from my NAND Android Builts to a Windows 6.5 ROM. But after Flashing, the reboot got stuck at the logo. I tried flashing over and over again, different WinRoms, reflashed MAGLDR and even tried a combination with HSPL. nothing seems to work. I dont pass the logo, cannot enter MAGLDR or load a normal build. I kinda run out of all my magic. anyone got any suggestions?
Click to expand...
Click to collapse
What hspl version and radio are you using? To use magldr you need 2.08.hspl and radio 2.08.50.xx or higher .50 radio
I'm not sure why it would hang on reflash to winmo, but let's try get to Android.
Hi!
I am using the SPL 2.08 and When i am installing the MAGLDR111 or MAGLDR113 it's Stop in 0%
How i can install the MAGLDR?
grisantycosme said:
Hi!
I am using the SPL 2.08 and When i am installing the MAGLDR111 or MAGLDR113 it's Stop in 0%
How i can install the MAGLDR?
Click to expand...
Click to collapse
you're using Stock SPL, you need Hard SPL (HSPL)
ClydeB1 said:
Are you using magldr 1.13? If so you need to use the new CWM 1.3 partitions which now installs the partition onto NAND, so to use CWM you need to boot into the AD Recovery option from menu and not Boot AD SD. There is also no need to copy files to root of sd card.
There is a problem with magldr usb mass storage, but if you boot to CWM, select mount and storage and the usb storage you can copy perfectly.
Click to expand...
Click to collapse
You...so...rock!
I've been getting utterly frustrated with watching Windows bars filling only halfway, but your solution worked like a charm!
:good: x many!
magldr problem
hi
i was instaling the magldr on my htc hd2, but during the instalation i realise that my VOLUME UP and DOWN buttons are broken and dont work...i have to choose some option in MAGLDR but i cant...so i'm stuck here, my phone boots only MAGLDR even when i restart the phone from the red button, or even when i pull out the batery...is there some option to turn off the magldr, without using the volume buttons? please help me..in the store workers tell me that they cant fix the broken volume buttons...and now i cant use my phone... cheers...
I am trying to re-flash WIN6.5 with no luck
1. I installed HSPL2.8 and MAGDLR 1.13 with the hope of trying CWM and loading Android to NAND.
2. I used ClockworkMod Recovery to install zip from SDCard using TyphooN_CM7_v2.8.0-cLK.zip
3. Progress looked like install was completed
4. When re-booting, got message NAND Kernel open failed
I TRIED TO REFLASH MY WIN6.5 from the RED/GREEN/BLUE bootloader menu but now I do not get a valid connection via USB
The Bootloader screen shows 'USB' at the bottom and when I click the Custom_RUU.exe I used to load my Custom Win6.5 ROM I get the first screen showing the update button etc. but when I press update, the progress bar appears on the PC and my HD2 but no update actually occurs
FINALLY AFTER A FEW MINUTES I GET A 'RECOVERY SCREEN' and update failed message.
CAN SOMEONE PLEASE HELP???? I will gladly 'Donate' some beer money
when you turn on your phone hold the red power button until the magldr screen pops up then go to flash to usb then download the stock rom for win 6.5 it should be in the win6.5 development threads on XDA the rom should be a .exe file, run the file once u establish a usb connection with the computer. if you can't get on the magldr screen, try going to the boot screen ( the one with the color stripes) and re-flash your magldr or the hspl4. as long as you can get into the magldr boot screen then you should be able to flash android or winmo. hope that helps.
Phongsta said:
when you turn on your phone hold the red power button until the magldr screen pops up then go to flash to usb then download the stock rom for win 6.5 it should be in the win6.5 development threads on XDA the rom should be a .exe file, run the file once u establish a usb connection with the computer. if you can't get on the magldr screen, try going to the boot screen ( the one with the color stripes) and re-flash your magldr or the hspl4. as long as you can get into the magldr boot screen then you should be able to flash android or winmo. hope that helps.
Click to expand...
Click to collapse
This couldn't be more wrong lol. You can't flash WinMo ROM's from MAGLDR, only WP7 and Android.
Anyway why don't you just try flash a different Android ROM? Even one that has a daf and not a .zip that you have through CWM.
If you do want to go back to stock though, download your stock ROM from the HTC site or T-mobile depending on which phone you have (T-mobile say t-mobile at the top and has red and green call/end buttons). Then once you've downloaded it, rename the file to .zip (should be .exe by default) then using WinRar open the file and look for a file that ends with '.nbh' in WinRar. Once you've found that file just extract it to wherever you want and rename it to 'LEOIMG.nbh'. Once you've done that, place it on the root of your SD card, then POP your SD card back in to your HD2, boot to HSPL (tri colour) and you'll come to a screen which will allow you to flash the ROM from SD and you're done.
PS. you need a 4GB or smaller SD card to flash it.
Good luck.
Sent from my HTC Vision using XDA App
Skellyyy said:
This couldn't be more wrong lol. You can't flash WinMo ROM's from MAGLDR, only WP7 and Android.
Anyway why don't you just try flash a different Android ROM? Even one that has a daf and not a .zip that you have through CWM.
If you do want to go back to stock though, download your stock ROM from the HTC site or T-mobile depending on which phone you have (T-mobile say t-mobile at the top and has red and green call/end buttons). Then once you've downloaded it, rename the file to .zip (should be .exe by default) then using WinRar open the file and look for a file that ends with '.nbh' in WinRar. Once you've found that file just extract it to wherever you want and rename it to 'LEOIMG.nbh'. Once you've done that, place it on the root of your SD card, then POP your SD card back in to your HD2, boot to HSPL (tri colour) and you'll come to a screen which will allow you to flash the ROM from SD and you're done.
PS. you need a 4GB or smaller SD card to flash it.
Good luck.
Sent from my HTC Vision using XDA App
Click to expand...
Click to collapse
I think this should work for you ,,, it always work for me this way
mburian said:
I am trying to re-flash WIN6.5 with no luck
1. I installed HSPL2.8 and MAGDLR 1.13 with the hope of trying CWM and loading Android to NAND.
2. I used ClockworkMod Recovery to install zip from SDCard using TyphooN_CM7_v2.8.0-cLK.zip
3. Progress looked like install was completed
4. When re-booting, got message NAND Kernel open failed
I TRIED TO REFLASH MY WIN6.5 from the RED/GREEN/BLUE bootloader menu but now I do not get a valid connection via USB
The Bootloader screen shows 'USB' at the bottom and when I click the Custom_RUU.exe I used to load my Custom Win6.5 ROM I get the first screen showing the update button etc. but when I press update, the progress bar appears on the PC and my HD2 but no update actually occurs
FINALLY AFTER A FEW MINUTES I GET A 'RECOVERY SCREEN' and update failed message.
CAN SOMEONE PLEASE HELP???? I will gladly 'Donate' some beer money
Click to expand...
Click to collapse
WOW!! for a newbie, u sure know how to go for d big guns ...Anyway according to your post, i tk it u downloaded the "TyphooN_CM7_v2.8.0-cLK.zip" file ryt?...Well in [cLK/MAGLDR]TyphooN CyanogenMod 7 RC2+ v2.8.4's thread, it tells you there are two ways to install this particular build...I'm guessing u tried installing the "TyphooN_CM7_v2.8.0-cLK.zip" thru MAGLDR-CWM instead of following Charmacas's cLk tutorial.
So in d spirit of learning, Start d whole process again (Task 29, etc), go back to the build's thread (link above), choose which method is most comfortable 2 u ( i recommend MAGLDR) and re-download the latest & APPROPRIATE build for the process or just download from the links below....
MAGLDR Method.
cLK Method.
Nw abt reflashing WinMO, U've got HSPL installed so u r good...Just perform a Task 29 (dis wipes ur phone clean, leaving ur HSPL & radio intact) from the bootloader screen...Should usb fail? unplug n try another usb port on your pc...Then simply flash ur desired WinMo ROM.
This my friend is what happens when dev's instructions are not followed...Do read, understand n be more careful nxt time...Donate to the devs if i helped u.
All done !
voncrane said:
WOW!! for a newbie, u sure know how to go for d big guns ...Anyway according to your post, i tk it u downloaded the "TyphooN_CM7_v2.8.0-cLK.zip" file ryt?...Well in [cLK/MAGLDR]TyphooN CyanogenMod 7 RC2+ v2.8.4's thread, it tells you there are two ways to install this particular build...I'm guessing u tried installing the "TyphooN_CM7_v2.8.0-cLK.zip" thru MAGLDR-CWM instead of following Charmacas's cLk tutorial.
So in d spirit of learning, Start d whole process again (Task 29, etc), go back to the build's thread (link above), choose which method is most comfortable 2 u ( i recommend MAGLDR) and re-download the latest & APPROPRIATE build for the process or just download from the links below....
MAGLDR Method.
cLK Method.
Nw abt reflashing WinMO, U've got HSPL installed so u r good...Just perform a Task 29 (dis wipes ur phone clean, leaving ur HSPL & radio intact) from the bootloader screen...Should usb fail? unplug n try another usb port on your pc...Then simply flash ur desired WinMo ROM.
This my friend is what happens when dev's instructions are not followed...Do read, understand n be more careful nxt time...Donate to the devs if i helped u.
Click to expand...
Click to collapse
Thanks m8... I figured out my problem... HAVE TO RUN EVERYTHING 'AS ADMINISTRATOR' ... anyway... won't make that mistake again...
Thanks Everyone for all your help!!!!
mburian said:
Thanks m8... I figured out my problem... HAVE TO RUN EVERYTHING 'AS ADMINISTRATOR' ... anyway... won't make that mistake again...
Thanks Everyone for all your help!!!!
Click to expand...
Click to collapse
Glad 2 help, just hit d thanks button nxt time....Enjoy ur device.
mburian said:
I am trying to re-flash WIN6.5 with no luck
1. I installed HSPL2.8 and MAGDLR 1.13 with the hope of trying CWM and loading Android to NAND.
2. I used ClockworkMod Recovery to install zip from SDCard using TyphooN_CM7_v2.8.0-cLK.zip
3. Progress looked like install was completed
4. When re-booting, got message NAND Kernel open failed
I TRIED TO REFLASH MY WIN6.5 from the RED/GREEN/BLUE bootloader menu but now I do not get a valid connection via USB
The Bootloader screen shows 'USB' at the bottom and when I click the Custom_RUU.exe I used to load my Custom Win6.5 ROM I get the first screen showing the update button etc. but when I press update, the progress bar appears on the PC and my HD2 but no update actually occurs
FINALLY AFTER A FEW MINUTES I GET A 'RECOVERY SCREEN' and update failed message.
CAN SOMEONE PLEASE HELP???? I will gladly 'Donate' some beer money
Click to expand...
Click to collapse
you must istall zip for MAGLDR not for CLK!!
mburian said:
I am trying to re-flash WIN6.5 with no luck
1. I installed HSPL2.8 and MAGDLR 1.13 with the hope of trying CWM and loading Android to NAND.
2. I used ClockworkMod Recovery to install zip from SDCard using TyphooN_CM7_v2.8.0-cLK.zip
3. Progress looked like install was completed
4. When re-booting, got message NAND Kernel open failed
I TRIED TO REFLASH MY WIN6.5 from the RED/GREEN/BLUE bootloader menu but now I do not get a valid connection via USB
The Bootloader screen shows 'USB' at the bottom and when I click the Custom_RUU.exe I used to load my Custom Win6.5 ROM I get the first screen showing the update button etc. but when I press update, the progress bar appears on the PC and my HD2 but no update actually occurs
FINALLY AFTER A FEW MINUTES I GET A 'RECOVERY SCREEN' and update failed message.
CAN SOMEONE PLEASE HELP???? I will gladly 'Donate' some beer money
Click to expand...
Click to collapse
you must istall romzip for MAGLDR not for CLK!!
i just put on nand rom for the first time, and i want to re-do it with american android, but when i try running magldr 1.13, it says usb not connected and i cant get past this to flash american android, any answers for this plz, ty much, error :260:
can you give us pls some more input on what you are doing exactly? Where does it get stucked, when you boot it or do you select something from the menu and then the problem with no usb connected occurs?
well when i go into magldr and try to get it to go into usb flash, so i can flash american android, it opens and i check the boxes and click next, then it scans for the usb, but it wont bring up an error, and it tells me to make sure my usb is connected and it is connected already???? im a noob at this so i cant explain to much into what im doing wrong, im just going by the steps ive read, i have android on it and it works just great, but i want a dif rom, not the stock rom i found.
when you choose usb flasher do you see:usb flasher......usb
i think americandroid is using daf method.so right click on aca.exe and run as administror.
be sure you downloded mgldr version of it (not clk)
never mind, my mistake
when i try running magldr it says error and it wont run magldr, and usb is connected, but it says it isnt...?
plz can anyone tell me what im doing wrong??? im running magldr and my hd2 is connected, but when i check the boxes in magldr and click next it looks for my pda, then says error 260 and make sure cradle/cable is plugged into pc, and it is, and it wont go into magldr so i can click usb flash drive...???
please be more specific and write your steps. what do you mean by saying ' i'm running mgldr'.have you flashed it to your phone in usb flasher mode? what are specifications of your phone.have you done these:
1)hspl 2.08
2)task 29?
3)flash mgldr
4)partition of sd
5)partition of nand by cwr
mutil said:
please be more specific and write your steps. what do you mean by saying ' i'm running mgldr'.have you flashed it to your phone in usb flasher mode? what are specifications of your phone.have you done these:
1)hspl 2.08
2)task 29?
3)flash mgldr
4)partition of sd
5)partition of nand by cwr
Click to expand...
Click to collapse
ok last night i did my first nand on my nd2, i ran the hspl, then i ran the magldr 1.13, then i scrolled down to usb flasher, then i ran the rom that the youtube link gave me, http://www.youtube.com/watch?v=cvS4EvS0PAw then it all worked, i had android on my phone, but i dont want the rom in the youtube link, i want one from this forum american android, and i was wondering, when i go to run magldr on my nand android i flashed, it tells me error and that to check if my phone is connected, and im just trying to do what i did in the youtube video but with a dif rom, but it wont work from android, it did just fine on wm 6.5, and my phone is connected to the usb, but it tells me it isnt, but i can still transfer music and other things, but when i go to run magldr it tells me my phone isnt connected, so i cant get into magldr and scroll down to flash usb and use the rom i want to use from this site, better? plz help thanks much.
in order to go into mgldr menu power off the phone.then power on but hold down the power key until mgldr menu comes. its not necessary to reload mgldr for each rom.if you installed it to your phone now it is in it.
i left it alone, and i powered off and tried turning it back on this morning when i woke up, and it powers on and then stops on quietly briliant, it wont even go into android now, is there any way i can go back to wm 6.5? or make my phone work again? when i go into magldr in usb flasher mode and try flashing a new rom, it tells me an error has occurred, error descriptio: USB init failed info: \rspl\rspl.cpp 736??? now my phone doesnt work at all... :<
getting phone working...
_fly
have you used the the HD2 toolkit? You can find/download from here
http://forum.xda-developers.com/showthread.php?t=1090783
try wiping the phone with task29, then loading the MAGLDR or cLK / which ever nand/rom you want to use. Hopefully this works for you....
_fly said:
i left it alone, and i powered off and tried turning it back on this morning when i woke up, and it powers on and then stops on quietly briliant, it wont even go into android now, is there any way i can go back to wm 6.5? or make my phone work again? when i go into magldr in usb flasher mode and try flashing a new rom, it tells me an error has occurred, error descriptio: USB init failed info: \rspl\rspl.cpp 736??? now my phone doesnt work at all... :<
Click to expand...
Click to collapse
you mustn't flash new roms in mgldr-usb flasher mod.
1)just put rom.zip into sd
2)go to mgldr-ad recovery-install zip from sd-choose zip from sd-find rom in the list and choose with call button.after installation is completed reboot.
try these with that rom:http://forum.xda-developers.com/showthread.php?t=933951
mutil said:
you mustn't flash new roms in mgldr-usb flasher mod.
1)just put rom.zip into sd
2)go to mgldr-ad recovery-install zip from sd-choose zip from sd-find rom in the list and choose with call button.after installation is completed reboot.
try these with that rom:http://forum.xda-developers.com/showthread.php?t=933951
Click to expand...
Click to collapse
when i go into ad recovery it says no boot source???
Then you have to install cwm first.
I have had a similar problem with my phone and what worked for me was disconnecting the usb cable and plugging it back in. then it seen it as usb and i was able to flash the ROM. i know it seems rather simple but this small fix might work for you as it did for me.
if you can install cwm i would highly suggest to do that and also looking into the hd2 toolkit as someone else as already pointed out.
Hi, Tried installing my first Nexus ICS Android on HTC HD2
following instruction here http://forum.xda-developers.com/showthread.php?t=1434860
Got to the point where I got MAGLDR v1.13 installed and running.
Then found that I needed HD2 Android NAND Tool and Repartitioned System size to 200 Mb
using USB flasher mode on the MAGLDR.
Then NAND Tool suggested that running Wipe(taks 29) to be a good idea before attempting to install Android so I tried running this as well.
I got the phone into tri-colour USB mode and started wipe. USB mode disappeared replaced by HTC progress bar but it got stuck at 0% and timedout.
I tried recovering to HTC original WWE ROM but it also gets stuck at 0% progress.
Currently Bootloader starts and loads a options, I can also go into USB mode but nothing will start updating the phone it gets stuck at 0%.
I think what repartitioning created a problem but I am unsure how to recover it and need your help!
sofaford said:
Hi, Tried installing my first Nexus ICS Android on HTC HD2
following instruction here http://forum.xda-developers.com/showthread.php?t=1434860
Got to the point where I got MAGLDR v1.13 installed and running.
Then found that I needed HD2 Android NAND Tool and Repartitioned System size to 200 Mb
using USB flasher mode on the MAGLDR.
Then NAND Tool suggested that running Wipe(taks 29) to be a good idea before attempting to install Android so I tried running this as well.
I got the phone into tri-colour USB mode and started wipe. USB mode disappeared replaced by HTC progress bar but it got stuck at 0% and timedout.
I tried recovering to HTC original WWE ROM but it also gets stuck at 0% progress.
Currently Bootloader starts and loads a options, I can also go into USB mode but nothing will start updating the phone it gets stuck at 0%.
I think what repartitioning created a problem but I am unsure how to recover it and need your help!
Click to expand...
Click to collapse
Wrong forum, should be in the Q&A. You'd have thought it would be obvious, seeing as you're asking a QUESTION, but somehow people don't pick that up
Also, you really need to read more. There isn't any point in installing MAGLDR then Task29ing, in fact there is very little point in Task29ing at all unless you experience major problems with your phone. A simple data wipe (in CWM) and repartition has never failed me.
If you did a task 29 after doing the other steps first then you wiped everything back off. Install magldr again then CWM and then install your rom of choice.
Also for being a member since 2005 you should know not to EVER post a question in development.
Mods please move to Q&A
Sent from my Galaxy Nexus, T989, HD2, G2x or Touchpad.
moved
Sorry for posting it in the wrong forum.
Many thanks for the comments...I cannot install anything at present because once update process starts it times out at 0%. Task29 did not work either - it also gets stuck at 0%.
Only thing that works is Boot loader and USB mode.
As Boot loader is working I tried to install NAND Android following this instruction:
2. FLASH YOUR ANDROID ROM
The Original NAND Android Thread by Cotulla is *HERE*
NOTE1: This section is only applicable AFTER you have flashed MAGLDR to your Device
NOTE2: Make sure your phone is still connected via usb cable before starting
* When your phone Reboots it will Enter the MAGLDR Boot Menu Screen *
1. Press the 'Volume Down' button to goto Option 5: USB Flasher and press the 'Call' button (far left of the 5 hardware buttons at the bottom)
2. The menu will enter Android Flasher mode and install usb drivers if not present
3. Browse to the folder you extracted your NAND Android Package files to on your pc, right click on Run DAF.exe (or Install.exe if DAF.exe isnt present) and select Run as Administrator
But DAF is giving this error back:
Error happen
Read below for more information
Error Description: USB init failed
Info: .\RSPL\RSPL.cpp (723)
thats all old instructuions.
go get the nand toolkit, and also get hspl3
...
phone into bootloader (tri colour screen, not magldr)
connect usb
run hspl3
choose 2.08.hspl (don't assume its already 2.08.hspl, check it, hanging at 0% is often a sign of no hspl)
when reboots immediately go back into bootloader
*(* from here on you can do all this in the nand toolkit*)*
flash magldr
when it reboots enter magldr
(if phone hangs on a htc screen and doesn't show magldr, you need to flash radio 2.15.50)
phone into magldr
connect usb
choose 'usb flasher'
in toolkit select desired system partition size and cache size
when its finished
phone back into magldr
choose 'ad nand'
this starts cwm
(if you havent yet partitioned your sd card with an ext partitio, look ity up and do it now)
select 'install zip from sd'
select zip from sd
browse to where you dropped the rom.zip file onto your sd card.
when it reboots you're done, , alternatively it failed somewhere, , which step?
if you get apparent driver errors, theres a nice big button called drivers in the toolkit (i think?)
Many thanks that worked like clockwork
Sorry if the thread topic is not okay, but there is the problem:
When I turn on the phone and it try to open Nand there is following message: Nand Kernel open failed and then it goes in Magldr menu. I don't have installed WinMo, so Boot WPH doesn't work. Boot AD SD also doesn't open anything, because I don't have rom on the SD card. When I am trying to go into USB Flasher the phone shows Waiting USB and i can wait ages. My PC show me erorr window of not being able to recognize the device. Therefore i can't flash it. AD Hardreset was performed multiple times, and it doesnt help. AD Recovery shows me this: Erorr: erorr: invalid boot image header I cant do it with Task29 and i think that maybe i killed the phone .... is it possible to put an SD ROM on the SD card and try to perform Task29?
Thanks in advance for the help.
install the android usb drivers , , , several ways to achieve that, , my fave is to install 'myphoneexplorer', then usb flasher should work and you can use teh toolkit to repartition the nand and install CWM, then use cwm to install a rom.
If none of this makes any sense, you haven't read enougH!