Database Users

Crash then lockup

so i have a stock rooted a500 i got yesterday new.
have a problem..
10 minutes ago i was setting a wallpaper to a picture of my car. i cropped and set..wallpaper stayed black, so i did it again, still black. so i tried a different picture.
Crash
restarted, now stuck at lock screen, lock button doesnt slide, once you shut screen off, wont turn back on. clock doesnt move either. help?

Snag a paperclip
Hit that reset button.
Failing that, i'm at a loss. Never had anything remotely similar happen.

entropy.of.avarice said:
Hit that reset button.
Failing that, i'm at a loss. Never had anything remotely similar happen.
Click to expand...
Click to collapse
niether have i, i have a custom evo. reset button only restarts it
i didnt flash recovery yet, though i can access the files via usb when its locked at lock screen, so im going to try adb push

Good move
Or you can always toss a full stock ROM image on microSD and flash without custom recovery.

entropy.of.avarice said:
Or you can always toss a full stock ROM image on microSD and flash without custom recovery.
Click to expand...
Click to collapse
ok, adb sees no devices, so ill have to do it that way

where can i find a stock full rom for USA? seems full package links are dead

skullzaflare said:
where can i find a stock full rom for USA? seems full package links are dead
Click to expand...
Click to collapse
Not sure - never done any full package flashes, only update packages. Pretty sure I've seen a bunch of them around these fourms.
Best of luck - hope you don't have a dead tab.

entropy.of.avarice said:
Not sure - never done any full package flashes, only update packages. Pretty sure I've seen a bunch of them around these fourms.
Best of luck - hope you don't have a dead tab.
Click to expand...
Click to collapse
so far it seems i do, tried a update, and still does the same thing
it would be fine if i didnt have a custom boost animation in the system/media
i still have 12 more days warrenty.
is there a way to delete it via computer?

not sure if anyone knew about the hard reset, i contacted acer and played dumb, though i told them what happened.
i was instructed to
Power down the device
hold Vol Up + Power for 3 sec
continue holding Vol up, and keep switch the screen lock back and forth until "erasing cache" comes up on the acer screen
at which point you stop and let it run its course.
said it would take 30 minutes. i fell asleep, 2hrs later i checked it, still same. recontacted acer, another tech said to do the default hard restart with the push pin
worked like a charm
in process of rooting, installing CWM and making backup lol

skullzaflare said:
not sure if anyone knew about the hard reset, i contacted acer and played dumb, though i told them what happened.
i was instructed to
Power down the device
hold Vol Up + Power for 3 sec
continue holding Vol up, and keep switch the screen lock back and forth until "erasing cache" comes up on the acer screen
at which point you stop and let it run its course.
said it would take 30 minutes. i fell asleep, 2hrs later i checked it, still same. recontacted acer, another tech said to do the default hard restart with the push pin
worked like a charm
in process of rooting, installing CWM and making backup lol
Click to expand...
Click to collapse
Hello ,
Did have the same problem and solved it by flashing the update.zip found on this site.
I've put it on the root of the SD card , push start and holding vol down , and then perform the update .
Can you explain me tough what you men by " do the default hard restart with the push pin " .
Thanks

BerreZ said:
Hello ,
Did have the same problem and solved it by flashing the update.zip found on this site.
I've put it on the root of the SD card , push start and holding vol down , and then perform the update .
Can you explain me tough what you men by " do the default hard restart with the push pin " .
Thanks
Click to expand...
Click to collapse
the reboot is for if it stops responding, like a reset button on a computer. its under the usb port
flashing any update zip didnt work for me

skullzaflare said:
flashing any update zip didnt work for me
Click to expand...
Click to collapse
Did you get it from a local retail location? If so, I would just march back there with my receipt and not give too many details - i was working on a picture and it broke and I have no idea what is wrong, etc - they should just give you a new one.
Have you tried clearing the cache? There is a combo with holding power / volume up when booting and using the rotation lock switch, not quite sure how it is done but i think you just hold both and flip the switch like mad - totally sure I have seen the process posted here somewhere.
If you got it via online order, you still should be able to just return it.
Or call acer - they might be able to work some magic.
Best of luck, hope you get it going or at least get a new one. Really sounds like you have a defective unit, I rooted mine the day after I bought it, have had it for nearly two months and multiple rootings/unrootings/rom flashes and have had no issues at all.

[Q] Need to restore after failed update

I just bought my A500 a couple days ago. I received a couple OTA updates but the last one froze up. After powering down my tablet and bringing it back up the touch is unresponsive.
I've found that if I unplug the power from it I am able to press the power button on and off and that seems to make the touch part work.
However, once I'm in the OS it constantly resets to a black home screen with "Android System" up in the top left corner. Next to that is an icon with a big gear and a small gear with a green belt around them.
The tablet is full stock and I can't enable USB debugging because settings always resets as soon as I get into that area.
I've tried flashing many ROMs using the Power/VOL + recovery mode but none of the ROMs work.
I am assuming that I will need an official ROM in order to actually restore the tablet.
Can anyone help me either track down a stock ROM, ie "update.zip" or help me figure out a way to restore this tablet another way?

Ok, when I plugged in my tablet just now it said USB Debugging was on.
What are my options with pushing an update to the tablet? Are there any methods that would work for me in this case?
Would I be able to root the device at this point and have more recovery options?

Same thing happened to a friend of mine. I followed the directions on this page to fix it:
http://www.androidtablets.net/forum...ding-yellow-triangle-exclamation-point-2.html
Basically you are just making it revert to a earlier version.

klaus9000 said:
Same thing happened to a friend of mine. I followed the directions on this page to fix it:
Basically you are just making it revert to a earlier version.
Click to expand...
Click to collapse
You are awesome! I've been looking and looking for an image that would work and the one at the bottom of that thread worked like a charm!
Thank you so much for your help!

This rom is not rooted correct? I need to go back to factory to return for warranty.

[Q] First blue screen, now boot loop.

Hello XDA-devs forums,
I'm having an issue since yesterday.
I have rooted my Huawei Ideos X5, and it ran fine for a day or so.
However, when my battery ran out it shut down into a completely blue screen.
When I tried booting it again, this just showed me a blue screen as well.
Now, I fixed this issue by connecting the phone to my PC after booting it with the Vol+ and Vol- pressed.
(So you get the pink/purple screen)
However, when I opened the phone on my PC, all I saw was a "239 MB" "empty" space, and it should have ~2GB..
I placed a backup copy I saved of my "image" folder in that 239 MB storage, and it booted.
However, today I hooked it up to my PC again to see if it magically changed..
And I couldn't access the 239 MB space anymore.
When I tried fixing the issue with a reboot of the phone, that just caused it to get stuck in a booting loop.
So now I'm stuck with a phone that keeps trying to boot itself,
and I can't access it on my windows PC.
I can, however, access 4 different folders of the phone on my linux notebook.
Now, my question is: can someone with a good understanding of problems like these please help me out?
I'm getting kind of fed up with it, as I've only got the phone for 2 days now.
Thank you in advance, and thank you for taking the time to read this.

Have you tried removing the battery for 5 minutes and then putting it back in?
After this, what happens when you press VOL+ and Power?
How about if you press VOL+, VOL- and Power, without the USB cable?

Hello Katu, thank you for posting.
Regarding your questions:
Yes, I have tried to take out the battery for 5+ minutes- it didn't change anything to the situation unfortunately..
If I press VOL+ and Power at the same time, the device boots into recovery mode.
In this I have tried to format the device in order to reset it to factory defaults, but this did not help either.
When I press VOL+, VOL- and Power, the phone boots into the pink/purple screen.

Can you try a custom recovery and a custom rom? I want to see if your onboard flash is borked.
u8800,cm7,[email protected]

I had the same when my phone got f*ucked up. Put the image folder, than download official rom, like b138 and install it. then check your imei. There is a change that it will be 0.

PlanDreaM said:
Can you try a custom recovery and a custom rom? I want to see if your onboard flash is borked.
u8800,cm7,[email protected]
Click to expand...
Click to collapse
Well, I used an original ROM:
U8800 V100R001C00B136(Overseas General version)
And that resulted in the boot.img being corrupted, so I can't even overwrite that anymore.
Also, this is what I see when I hit VOL+, VOL- and Power at the same time to boot into safe mode, and connect it to my PC.
img69 [dot] imageshack [dot] us/img69/244/10101191548pm.png
julle131 said:
I had the same when my phone got f*ucked up. Put the image folder, than download official rom, like b138 and install it. then check your imei. There is a change that it will be 0.
Click to expand...
Click to collapse
I installed the official B136 rom, and after it rebooted, it would just hang on a black screen.
(it used to show the IDEOS or Android logo when it booted)

Hmm mine came with this Rom
U8800 V100R001C00B135SP01 ( general )
Looking at your name you're from the Netherlands ( so am I )
where did you get this 136 version from ?
I would try to put this one on it
You have to put the 'dload' folder into the root of your SD Card,
then boot into boot-loader, after that it'll automatically flash back to the stock Rom.
1 Format SD card
2 On the SD card, create "dload" folder
3 Put the unzipped Rom into "dload" folder
4 Then boot to bootloader (pink screen)

Yes, mine came with that version as well.
However, I couldn't find it anymore and thus downloaded the version I said earlier.
Also, I did everything as you described, except step 4.
You have to boot to recovery instead of bootloader. (VOL+ and Power)
Anyways, I managed to get ClockworkMod's recovery.img on my phone,
and from there on install a custom ROM on the phone, which magically got it working again - even though it didn't work earlier.
Thank you for reading my thread and taking the time to reply to it.
My issue has been resolved.

just for the record, flashing a stock rom is different from flashing a custom rom..
the 4 steps described by Gman2oo6 is the correct way to flash a stock rom (and it is written clearly in the document that is in the stock rom zip file)
[edit]
step (1) is not a necessary step though..

Yeah, I noticed that.
What I did was format my SDcard with FAT32,
and put a custom rom (update.zip) on the SDcard.
I then booted ClockworksMod Recovery and installed the custom rom from the SDcard.
When I tried installing the stock rom, I just followed the PDF file's instructions that came with the stock rom.

hey i udated to GB 2.3.4 (official)and i didnt like the it cuz the wifif ddnt work and the bluetooth also the DATA so itryed to downgrade to 2.2.2 original official and it did the 2/2 steps intalled and when it restarted it did not want to turn on all that happened was it vibrated and thats all so i left it on like that and when the battery died i plugged it in to the AC and the LED turned on red and the touch kkeys also but not the screen so i really NEED help!

Try to turn it on with lead connected but no battery and see if you can start it.
My battery also went dead flat this morning and I couldn't get it started at all till I tried this. Once I got it started the only thing I could do was quickly pop in the batery and let it charge. Just leave off the cover till you get it going.
I have to add that I did not have the problem of a failed update to deal with but it may at least get you started

i tryed it
nope nothin good happened all that happens is a blank screen with nothin on ,LED is off and the touch keys are off. it justz vibrates and when i put the battery it turn the LED on to red and the touch keys turn on but then like 5 min later the LED and keys turn off

astewart said:
Try to turn it on with lead connected but no battery and see if you can start it.
My battery also went dead flat this morning and I couldn't get it started at all till I tried this. Once I got it started the only thing I could do was quickly pop in the batery and let it charge. Just leave off the cover till you get it going.
I have to add that I did not have the problem of a failed update to deal with but it may at least get you started
Click to expand...
Click to collapse
ok heres what i did i wanted to upgrade my phone to the newest version GB 2.3.4.So what i did was download the update and i followed the installation steps i successfully updated to Gb 2.3.4. so like i was checking how it look and the new feature but when i wanted to go on the android market i went to setting and turn on the wifi and it said Error and then i tried the Bluetooth and it said Error also so then i put my SIMs card in and i was like imma use DATA then and when i restarted my phone it had service but no HSPA+ or Edge or GPRS so like i just hatted my phone from their so then i was trying to root it but iddnt know how to do that so like i read this website and i got the UPDATE.APP or 2.2.2 AT&T did the same steps of the installation of BG 2.3.4 and it went to the process and 1/2 stepp good it passed and then 2/2 also passed it installed it and when it said Successively Installed it said Restarting and the scrren turn of and it vibrated and thats all that happened and i left it like that for the whole days and nothing happened
Do u got any idea?
When i connect it to my laptop it says installing drivers .then its says sucesfully installed drivers ready to use. so then i got to Device Manger and i check what has been installed and their it said USB Human interface device and HID-compliant device WHAT DOES THAT MEAN??

Not sure about the HID (human interface device) probably just the way windows sees the device for interfacing with it. With regards to the not booting I have read a lot of people saying that you need to factory reset and clear cache after the upgrade/downgrade. With the phone off, turn it on by long pressing volume+ and power on button till you get the blue recovery screen and from there you can reset factory/ data and also clear the cache. from what I see this should clear up the problem and start up. Please read this thread, it may help you somehow..... http://forum.xda-developers.com/showthread.php?t=1420728
Hope this helps a little

U mean Boot recovery and imma try it and thanks ill check it out
Sent from my MB300 using XDA App

all that i know is that if u customized your partition, it'll bootloop,
so go back to stock-partition ^^

How do I do that got like the steps or video?
Sent from my MB300 using XDA App
when i downgraded to 2.2.2 i installed this V100R001C00B138SP04CUSTC185D002
http://forum.xda-developers.com/showthread.php?t=1251250 got it from that link

Looks like you are not having much luck. Did you try to factory reset?

astewart said:
Looks like you are not having much luck. Did you try to factory reset?
Click to expand...
Click to collapse
well how do i do that do i need to got to the purple/pink screen or bot recovery cuz i cannot access that my phone doesn't do anything pretty much

[Q] Acer iconia A500 Tablet wont go into recovery mode

I have had my acer iconia tablet for 2 months.
I am a total noob when it comes to rooting, flashing or installing new roms on any android device. Never done anything like it.
My tablet just boot loops and all i get is "green android icon holding a yellow triangle with an exclamation point".
What can i do. I have seen a youtube video of a user holding down the volume down + power key and he is presented with a menu to factory reset and cache resetting and all that good stuff. I do not get any of that. Any help would be appreciated.

the menu that you seen in the video. was likely CWM RECOVERY. You do not have that menu due to the fact you do not have a custom recovery installed. the android with exclamation leads to believe you have acer recovery. Its limited Only able to flash a ACER Signed update.zip only .
Reply back with exactly what you did with details about rom version and so on . So someone can better help you. To get the right help we need to know how you broke it..
At this point Do not do anything until you know you are doing the correct fix for your situation.. You are NOT Bricked.. you just have a bad UPDATE.ZIP FILE OR Bad format on your sd card..
Help is close by..

To be honest i really do not know what rom version was used. Like i mentioned before. I myself have never rooted or altered an android device.

From where you are right now in a boot look .. where do you want to end up.. ROOTED ... STOCK TO WHERE YOU can accept the acer OTA. when they push them..
sounds like you may be able to reset the tablet withe hole next to the usb port.. You have to push quite hard to get it to push the Button..
Im guessing due to the lack of information you are providing.. Sorry..

Thanks for your help. The darn thing is still doing the same thing. Guess i got to do a little more research.

If you're asking for help you need to describe what actions exactly you have taken in order to reach this state (as Erica suggested) of your tab. From your post 1 thing is clear - your tab is unable to boot, but what has been modified before remains a mystery.

joester818 said:
I have had my acer iconia tablet for 2 months.
I am a total noob when it comes to rooting, flashing or installing new roms on any android device. Never done anything like it.
My tablet just boot loops and all i get is "green android icon holding a yellow triangle with an exclamation point".
What can i do. I have seen a youtube video of a user holding down the volume down + power key and he is presented with a menu to factory reset and cache resetting and all that good stuff. I do not get any of that. Any help would be appreciated.
Click to expand...
Click to collapse
Yeah, probably my guess, is you tab started to do an OTA update, and as in a lot of cases, it failed. And you're stuck with where you are now.
If using the pinhole reset near the PWR button doesn't work (a hard reset), then I suggest ;
1. Make sure your tab is charged.
2. Go to this thread, and select one of the rom update packages.
3. http://forum.xda-developers.com/showthread.php?t=1113878
Use one of the HC 3.2 update files near the end. Note that the Megaupload file no longer works.
Note that some of the packages are encrypted, so you will need to use the "decrypt" tool he has listed there in his 1st post. Copy it to PC, run it, select your encrypted rom, and let it do it's thing. This will give you the same rom, only states "decrypted" at the end of the file name.
4. Open the rom using Winzip or 7zip. Remove the update.zip (do not extract the contents of it), and copy it to the SD card (replacing a current update.zip if there's one there).
5. Holding either Vol- press and hold PWR. This should force the tab to install that update.zip (you should see some text on the screen, then you can release both buttons. Hopefully it will install.
Post back results please.

Just to complement Moscow Desire's advise: It's Vol (-).

drkalo said:
Just to complement Moscow Desire's advise: It's Vol (-).
Click to expand...
Click to collapse
Thanks! I can never remember which one, as I've never had to use it
Edited the instructions.

Moscow Desire said:
Yeah, probably my guess, is you tab started to do an OTA update, and as in a lot of cases, it failed. And you're stuck with where you are now.
If using the pinhole reset near the PWR button doesn't work (a hard reset), then I suggest ;
1. Make sure your tab is charged.
2. Go to this thread, and select one of the rom update packages.
3. http://forum.xda-developers.com/showthread.php?t=1113878
Use one of the HC 3.2 update files near the end. Note that the Megaupload file no longer works.
Note that some of the packages are encrypted, so you will need to use the "decrypt" tool he has listed there in his 1st post. Copy it to PC, run it, select your encrypted rom, and let it do it's thing. This will give you the same rom, only states "decrypted" at the end of the file name.
4. Open the rom using Winzip or 7zip. Remove the update.zip (do not extract the contents of it), and copy it to the SD card (replacing a current update.zip if there's one there).
5. Holding either Vol- press and hold PWR. This should force the tab to install that update.zip (you should see some text on the screen, then you can release both buttons. Hopefully it will install.
Post back results please.
Click to expand...
Click to collapse
Those vache-android.com links are not working. Do i need to have all of those files per update for the whole thing to work.

joester818 said:
Those vache-android.com links are not working. Do i need to have all of those files per update for the whole thing to work.
Click to expand...
Click to collapse
Be patient. Try later. Vach's server is probably overloaded due to the leaked ICS Rom.
You only need to get 1 of the A500 update roms. It's actually a fully signed rom in the file "update.zip" Just decrypt rom you the original rom you downloaded using the instructions, use winzip or 7zip to open the decrypted rom, remove the update.zip and copy it to your sd card.

And Then?
joester818 said:
Those vache-android.com links are not working. Do i need to have all of those files per update for the whole thing to work.
Click to expand...
Click to collapse
Hi,
did u succeed?
Rgds,

trying to recover A500 - boot recovery failed
Hi - I'm trying to reset and recover my son's A500 tablet. I copied one of the HC 3.2 Update.zip files to a microSD card, then held down Power and Volume - buttons. As long as I hold down the Volumn down buttin, the tablet seems to be stuck in a never ending cycle of loading the update and booting recovery image kernal, then restarting, then loading the update.zip file and booting recover image kernal, etc.... If I let go of the Volume Down button, I get in red letters "Boot Verification Failed" message, and it stops.

im trying to help fix an a500 tablet. apparently the tablet gets stuck at the acer logo. when i hit power and the volume button i get some lettering in the top letft. I took the advice here and went and downloaded one of the HC 3.2 updates. copied the update.zip onto the root of the Sd card and then put it back in. I hit the same buttons again and the letters came up. so i assumed things were working. all of a sudden i get an android with a blue diagram in its belly (kind of like it was loading) and then it froze. after waiting for a second I got a second android that popped on the screen and this one is laying on its back with its chest open and a red triangle is showing....So I don't know exactly what I did wrong here. Any help would be appreciated. I am not exactly sure what he did to mess it up. I believe he was trying to install a custom rom and did not go about it correctly and therefore messed up an update and now he has nothing. so im not sure what to do exactly.

Moscow Desire said:
Yeah, probably my guess, is you tab started to do an OTA update, and as in a lot of cases, it failed. And you're stuck with where you are now.
If using the pinhole reset near the PWR button doesn't work (a hard reset), then I suggest ;
1. Make sure your tab is charged.
2. Go to this thread, and select one of the rom update packages.
3. http://forum.xda-developers.com/showthread.php?t=1113878
Use one of the HC 3.2 update files near the end. Note that the Megaupload file no longer works.
Note that some of the packages are encrypted, so you will need to use the "decrypt" tool he has listed there in his 1st post. Copy it to PC, run it, select your encrypted rom, and let it do it's thing. This will give you the same rom, only states "decrypted" at the end of the file name.
4. Open the rom using Winzip or 7zip. Remove the update.zip (do not extract the contents of it), and copy it to the SD card (replacing a current update.zip if there's one there).
5. Holding either Vol- press and hold PWR. This should force the tab to install that update.zip (you should see some text on the screen, then you can release both buttons. Hopefully it will install.
Post back results please.
Click to expand...
Click to collapse
I to have had the same problem with my Acer Iconia A500. I followed the instruction and booted the Acer...got to the screen with the Android robot standing upright with the spinning in his stomach...goes to about 1/4 of the way and doesn't go any further....looks like it's trying to continue but has been at the same place for over an hour. Do I need a different rom perhaps?? I used A501.000.00_4.037.01.emea_tmp

mizzle54 said:
I to have had the same problem with my Acer Iconia A500. I followed the instruction and booted the Acer...got to the screen with the Android robot standing upright with the spinning in his stomach...goes to about 1/4 of the way and doesn't go any further....looks like it's trying to continue but has been at the same place for over an hour. Do I need a different rom perhaps?? I used A501.000.00_4.037.01.emea_tmp
Click to expand...
Click to collapse
Well, you can try this. Below are links to update.zip files already decrypted on my server. I have renamed them, only so you can keep them separate. You will have to change the name to "update" (update.zip) and copy one to ext sd card. Reboot holding Vol (+ or -) and PWR. See if they install. You may have to try each until one installs as there is no way to predict which one will work.
http://d-h.st/KXl
http://d-h.st/gw8
http://d-h.st/2cm
http://d-h.st/Zf8
This is probably the easiest method to try first.
MD

the "41-125-03-update.zip" seem to work for me. The status bar finally is showing but it doesn't seem to be moving. It moved to 1/4 of the bar and it stayed there. Last time it did this, it stayed there for over 2 hrs. I hope it's working this time. Anything else I could try?
My tablet was working fine and I left it there to go to work, coming back I found it on the Acer logo. Many search brought me here.

update ========
tried and tried and tried.......a few times that the status bar did come up, many times it stuck at around 25%. A few times it got all the way to 75% of the bar. It refuse to go farther when I left it there all night. It finally died when the battery was complete drain.

Acer A500 Stuck on ACER Logo (not rooted) finally fixed!
Just wanted to post some positive things for a change. My ACER A500 tablet (not rooted and running ICS 4.0.3) was working fine two months ago and I wanted to watch an ESPN3 football game on the tablet which I then hooked to my HD TV via the HDMI cable. For about an hour, all was fine then the tablet did an uncommanded reboot and then I had the android figure with an opened belly followed by an android laying on it's side with an exclamation mark. On the next restart, my tablet would not pass the ACER logo screen. After reading many posts with the stuck ACER logo, I was not sure how to proceed exactly. I have rooted a 7 inch tablet last year but I could not get my act together on the exact steps to revive my tablet. Finally I came across this post with the ACER ROMs already decripted which removed many questions I had about the exact steps to create an "update.zip" file for my SD card. Based on just downloading the file from your web site and renaming the file to "update.zip" and moving a copy to a formatted SD card, I was ready to try the process to load another ACER file to my tablet. On my first attempt, I tried the file named "206-03" based on a guess of the naming convention used or maybe blind luck. I preformed the PWR button and Vol down button combination with the "update.zip" file on the micro SD inserted in my tablet. The tablet started with three lines of text and then the android figure with it's door open and activity inside the android. This screen stayed then with a completion bar followed by a large text screen warning not to turn off tablet. After about 15 minutes total, my tablet was alive with a request to select my country. Bottom line, taking the steps to put the decripted file on your server and the simple button combination to start the reload process allowed me to get my tablet working great running ICS 4.0.3. I just wanted to post a success story and follow up. Thank you Moscow Desire for taking the extra steps to help the uneducated user!

Anyway I can check if my ROM hardware are working properly? I have tried all the update.zip and all of them show a dead android at the end. I can't even tell if it read from the microSD.

[Q] 4.0.3 OTA Update Reboots shortly after startup.

Okay, I finally had time to update my A500 to ICS I was at 3.1 and was rooted. I went through several updates to get to ICS. 3.2, 3.2.1, a small patch, then 4.0.3. After the update finished, saying it was successful, my tab will reboot itself no longer than 30 seconds after it gets to the lock screen I don't have time to uninstall any apps that might be interfering with startup, not that i could tell whats doing it, and i don't have time to do the factory reset through the system menus Not sure why but the recovery (power&vol boot) only displays a red triangle over a dead droid so, guess my actual question is, how could i go about correcting this issue? I have ADB if needed, but I don't know were to start. any help would be appreciated. THANKS.
[Edit]
Okay, so I managed to turn off the wifi on my tab and it seems to stop restarting. When I do turn on the wifi, several apps give an error that they have stopped. after the second one pops up the tab then restarts unless the wifi is shut off. Any ideas as to what this may be would be appreciated.

Hi, sorry to say that i have the exact same problem.
Updated today from 3.2 to 4.0.3 and after first boot started the reboot sequence that only stopped after I managed to switch off the wifi...
I investigated a little but it seems this is quite an isolated issue... and all ways are leading to the factory reset...

StarCruiser said:
Hi, sorry to say that i have the exact same problem.
Updated today from 3.2 to 4.0.3 and after first boot started the reboot sequence that only stopped after I managed to switch off the wifi...
I investigated a little but it seems this is quite an isolated issue... and all ways are leading to the factory reset...
Click to expand...
Click to collapse
guess i'll give that a shot, i dont have much installed anyway...

Hi,
Got that problem too. Did a factory reset and it works fine now.
Sent from my HTC Desire HD using XDA

Here's on direct from Acer Support:
(of course us old dogs already know this trick)
Note: Clean boot will erase all the data/information which is saved on your tablet. Recommend you to back up the data before performing a clean boot. (yeah, like you can get in there to save it
1. Shutdown the power (press the power button for long time to shutdown).
2. Press and hold volume up key (the key next to rotation lock) until you finish step 4.
3. Press power button for 3 seconds until you feel device vibrates then release power button.
4. Once you feel device vibrates, very quick to switch on/off "rotation key" many times (this activity has to be done very fast, otherwise it will not success). To ensure you success, switch on/off rotation key when Acer logo appears on screen.
5. Wait for a while (you will see Erase Userdata and Erase Cache on top-left corner on screen), device will reboot and start from OOBE screen.

Managed to get it to work. Appreciate the help. Runs like a champ now.
Sent from my A500 using xda premium