[Q] USB Storage Issue with MIUI 1.7.22 - Nook Color Q&A, Help & Troubleshooting

Not sure if anyone flashed this newly released rom -- I kept running into this issue: nc would die immediately after plug in usb while preparing usb mass storage, but worked just fine after reboot.
If I'm not wrong this issue came with the previous rom as well (1.7.15.1). Kinda annoying to wait until auto-reboot to use usb storage.
Can anyone pls share any misconfiguration or whatever's causing this issue? Thanks!

Related

USB connection problems

I'm experiencing some strange problems with my phone for few days. Problems started when I flashed cm_dream_sapphire-08122010-081631.zip, after that phone wouldn't see a USB connection (there were no notifications about USB debugging, etc). First I didn't really care - it's nightlies after all and some things can be broken, but today I flashed latest nightly and problem was still there. After that I started to worry and turn off the phone, but phone won't even charge from USB cable. then I restored my nandroid backup from the time whene everything was working fine and the problem didn't solve. So, I've replaced USB cable (my USB player still works fine with old cable, so I don't really think it's the cable) and phone started to charge from USB cable. But the problems still here...
1) when I use USB-MS toggle from recovery I can't access my sdcard at all and get error message when I try to access it (something about input/output error on device)
2) when I try to enable USB storage on the phone it turns on for a few seconds and then turns off by itself
also, I tried to get a logcat when I'm enabling USB storage:
hxxp://cyanogenmod.pastebin.ca/1916936 (forum don't allow new users to post links to external recources)

[Q] USB doesn't work

Hi
Yesterday I S-Offed my Wildfire and instelled CM7 rom.
But today I wanted to transfer some music to my phone and i couldn't do it.
When i plug USB cable into PC, my phone just charges and can't do anything more because phone doesn't show that it is plugged by USB. Just USB debugging turns on but I can't transfer anything to my phone.
Yesterday it was all OK but I flashed google apps and Jacob's kernel(v4.2). Maybe that is a problem.
I'm waiting for advice
I have a similar problem.
The phone also shows connect via usb option.
But on doing that, the phone does not show up on my pc.
When I go to "Disk Management" in computer management on windows 7, the disk shows up but I can't assign a drive letter to it and hence it is not accesible.
Can any1 help with the problem ?
Forgot to mention.
The problem does not appear when I connect my wildfire to my mac.
It shows up as as a disk drive when mounted.
I had a similar problem after installing CM7 so I got Multi Mount Sd-Card Lite from the market, put the widget on homescreen and click it each time i mounted my usb.
Hope it solves your problem!
Linis6 said:
Hi
Yesterday I S-Offed my Wildfire and instelled CM7 rom.
But today I wanted to transfer some music to my phone and i couldn't do it.
When i plug USB cable into PC, my phone just charges and can't do anything more because phone doesn't show that it is plugged by USB. Just USB debugging turns on but I can't transfer anything to my phone.
Yesterday it was all OK but I flashed google apps and Jacob's kernel(v4.2). Maybe that is a problem.
I'm waiting for advice
Click to expand...
Click to collapse
Don't flash Jacob's Kernel v4.2. Keep the stock one.
Thanks for advices
I re-installed CM7 and kept kernel which comes with rom.
Now I have NO problem with that.
So it was kernel problem.

Mounting USB and SD Card problems

Hey guys, I am having a bit of issues trying to get the Internal Storage to connect properly to my computer. I rooted and flashed RA Recovery yesterday and flashed Protekk's AOKP ROM, but now I'm not able to plug my tablet into my computer.
I thought it wouldn't work without USB drivers, so I tried to install them, but all it's giving is three quick beeps (the beep you hear when a USB device is connected).
I looked in the thread, but nobody mentioned a big issue like that, so I think there may be something that I am doing wrong.
Any help would be greatly appreciated! Thanks!
I'd also like to add that when I plug it into the computer, the USB Debugging icon appears on the tablet, so it's still getting somewhat recognized.
Sent from my SGH-T989 using xda premium

[Q] Micro USB port not working

hello,
mi micro USB is not working propperly right now, for some reason it doesn´t charges correctly, it seems a little... "loose"... im currentl running CM 9 2012/05/26
and when it plugg it in the computer and manage it to start charging, it wont allow me to acces it as a mass storage device, in fact the computer wouldn´t recognize it at all!, any help!?
try another cable, or connecting it to other port after rebooting (usb musnt be connected)
Swyped off my Amazing Defy using ICS
happened with me too, got its motherboard replaced
crap... I`m rooted... so no warranty...
maybe in some repair shop of cellphones the will be able to replace it?
but.. did yours charged at all?
bacause mine does charges when appropietly connected... its just that sometimes it wont nad it will not allow me to get to the mass storage...
If your phone just charge but can't access to masive storage, look in the device manager , if you have a MTP device, your micro ubs port is fine, just try to install some stock rom.
it´s just that some times it doesn´t charges and I need to slowly start trying to adjust the micro USB port so it can charge... that´s why I say that it seems to be a little loose...
As well it will only charge when plugged into my XboX 360 or the computer (and some other devices) but not when plugged into the Stock charger... :S
Jkmoran said:
If your phone just charge but can't access to masive storage, look in the device manager , if you have a MTP device, your micro ubs port is fine, just try to install some stock rom.
Click to expand...
Click to collapse
now, exactly who should I look in the device manager if its MTP?
t
Please use the Q&A Forum for questions &
Read the Forum Rules Ref Posting
Thanks ✟
Moving to Q&A
USB not working for flash
Hi everyone, I came with a similar issue.
The massive storage USB connection is not working for me, plus I can't flash a stock rom,
Currently I'm in MIUI for defy (and it's the only option I am able to install), I tried to wipe data cache to install cyanogenmod 7 from recovery but it's not working, it get stuck in the boot logo. I want to install cyanogenmod because it is fast than MIUI jelly bean.
My idea is to flash the device, but with the usb not working Im stuck,
any ideas to solve this? or should i go to have the usb repaired?
GabrielMercado said:
Hi everyone, I came with a similar issue.
The massive storage USB connection is not working for me, plus I can't flash a stock rom,
Currently I'm in MIUI for defy (and it's the only option I am able to install), I tried to wipe data cache to install cyanogenmod 7 from recovery but it's not working, it get stuck in the boot logo. I want to install cyanogenmod because it is fast than MIUI jelly bean.
My idea is to flash the device, but with the usb not working Im stuck,
any ideas to solve this? or should i go to have the usb repaired?
Click to expand...
Click to collapse
If after a boot in bootloader (power+vol-up) and connecting to PC via usb cable nothing appear onto PC display 3 possibilities exist.
1. Usb cable is broken.
2. Pc have no usb driver foryour device (but even in this case a error message appear)
3. Usb connector or circuitry fron Defy is broken.
Search.
Hi mates !
Please have a look to this fix: http://forum.xda-developers.com/showthread.php?t=2516956
I haven't picture posting permissions right now, but should be fixed soon
CJPJ said:
Hi mates !
Please have a look to this fix: http://forum.xda-developers.com/showthread.php?t=2516956
I haven't picture posting permissions right now, but should be fixed soon
Click to expand...
Click to collapse
Yes, is OK your method but is a little dangerous if you not cover the cleaned pins with some resin. More safe is to use a toothbrush soaked in isopropyl alcohol or 98% ethylalcohol to clean the soldered pins.
del//

No usb mass storage on C.M 7.2 stable

i'm facing a problem. i'm currently on c.m. 7.2 stable rom, and yesterday i tried to enable usb mass storage on my legend. The on-screen message stuck at the "enabling mass storage" logo, and after a while the device rebooted with no success. that same thing happenned again three times and the i just quited... anyone have an idea about it?
That happened once, but I wish in a rush and just used a MicroSD card adapter.
Unfortunately, I don't recall ever having that happen again after that one incident.

Categories

Resources