Related
Brief: Back up All - Contacts & Data (Remove Sim Card)
[Unlock Phone] [Install 'z4root.1.3.0.apk' 955.48kb] [Install 'Rom Manager' Android Market][Install 'Superuser' Android Market]
Ok the way we are doing this is
2.1 -> 2.2 fastboot -> 2.3.3
Start -
First Install Driver on PC:
'LGAndroidDriver_WHQL_ML_Ver_1.0_All_Win7'
Download this Link to PC: KDZ Updater Europe Open.zip 144mb
Put your phone into Download Mode
1. Take out 'Battery'
2. Put in 'Battery'
3. Hold down 'volume down' and hit 'Power-on'
4. The screen should display 'Download mode'
5. Plug in 'USB'
Extract KDZ Updater Europe Open.zip to your PC/Laptop
1. Run 'kdz_fw_upd'
2. Choose '3gqct' as the 'Type'
3. Choose 'Diag' as the mode
4. Click 'File icon' and select 'Europe Open+Fastboot.kdz'
then hit Launch Software Update
Please note: that you DO NOT have to let this flash finish (BUT IT IS EXTREMLY RECOMMENDED.. takes forever on this rom tho lol)
as we only need the fastboot part of it so leave it flashing for a few mins then remove the phone the updater software will come up with a few errors but just ignore them
Ok now we need the latest Recovery version of the swiftdroid software
Since i used 1.8 i will use this in this tutorial
Download Gingerbread 2.3.3 SwiftDroid_v1.9 95.2Mb
Ok extract the above file to your Pc/Laptop
Now take the 'update.zip' file from extracted folder and copy it to the root of your phones 'SD card'
Now put your phone into fastboot mode
1. Take out 'Battery'
2. Put in 'Battery'
3. Hold in 'Camera button' and press 'Power-on'
4. Keep camera button pressed until 'logo' disappears and it shows a 'blank screen'
5. Make sure phone is plugged into USB
Now open where you extracted folder the above archive (Gingerbread 2.3.3 SwiftDroid_v1.9)
1. Open 'CMD' within folder
2. Type 'flash_recovery.bat' to run
What this does is flash cyanogenmod recovery to your phone
which is a great tool for updating firmwares and restoring from bricks
Now we will put the phone into 'recovery mode'
1. Take out 'Battery'
2. Put in 'Battery'
3. Hold down 'Home button' and press 'Power-on'
4. Keep holding down the 'Home button' until the cyanogenmod recovery menu pops up (it takes a while.)
Now to install the 2.3 rom
1. Press the 'volume' down until 'install zip from sdcard' is selected
2. Then press the 'camera button'
3. Then press the 'camera button' on 'apply /sdcard/update.zip'
4. Then Press the 'volume' up and choose 'yes' and press the 'camera button'
Now this part will take a while (around 5-10mins)
it will say flash complete! when finished and will return to menu once done.
Menu will come back up...
Hit your 'Back button' and select 'reboot system now'
-------------------------------------------------------------------------
Note: if your phone hangs after reboot - I would like you to do below because you have ran out of room on your 'Internal memory' or 'Conflict'
Recovery Mode
1. Take out 'Battery'
2. Put in 'Battery'
3. Hold down 'Home button' and press 'Power-on'
4. Keep holding down the 'Home button' until the cyanogenmod recovery menu pops up (it takes a while.)
Wipe Data/Factory Reset
1. Press the 'volume' down to 'Wipe Data/Factory Reset'
2. Then Press the 'volume' up and choose 'yes' and press the 'camera button'
Now restart back at top of this page write-up
Put your phone into Download Mode
1. Take out 'Battery'
2. Put in 'Battery'
3. Hold down 'volume down' and hit 'Power-on'
4. The screen should display 'Download mode'
5. Plug in 'USB'
-------------------------------------------------------------------------
Tips..
When it loads it will ask you to slide the keyboard( lol what keyboard) the workaround this is to exit out of that part and sign in with ur google login in the market this will activate all the google apps and give you options to download gmail etc
Produced by Stryker’s Lounge AUS
Original Guide by aaa801 (good effort for first guide)
You have any video it is very clumsome for me please upload any
Sent from my GT540 using XDA Premium App
Ummm you forgot to provide any download links for the files you mentioned in the post. No use without those.
Getting Widgets Working in Android version 2.3.3
Home – Setting – Applications – Manage applications
Under Downloaded:
Look for Widgets you want to use on phone desktops
Click ‘Move to Phone’
Reboot Phone after..
Now Long-press Desktop
Select Widgets and Scroll and select
By Stryker's Lounge AUS
Thank you for your responce, I have included the MB, KB etc
Just copy/paste program as is on search web and download exact MB,KB
We are new here so I have to wait for 9 before I can come back and readd Links
Hope this helps...
p.s careful of downloads not exact MB or KB they are fake/trojans
Rooting doesn't unlock the phone and also you don't need to install ROM Manager, the GT540 doesn't support it.
Jack
HQRaja said:
Ummm you forgot to provide any download links for the files you mentioned in the post. No use without those.
Click to expand...
Click to collapse
Download links are available just hit search......
Sent from my GT540 using XDA App
JackG256 said:
Rooting doesn't unlock the phone and also you don't need to install ROM Manager, the GT540 doesn't support it.
Jack
Click to expand...
Click to collapse
Thanks JackG256,
The title of cause does not state anything about unlocking phones but however if you
go to Stryker's Lounge AUS Facebook...
Stroll down to bottom the last on current and older posts you'll find two free options but if your phone is not in list or a member of second option being 'Vodaphone' and neither have it -
I would recommend using a retail store to unlock....
bretthutton said:
Thanks JackG256,
The title of cause does not state anything about unlocking phones but however if you
go to Stryker's Lounge AUS Facebook...
Stroll down to bottom the last on current and older posts you'll find two free options but if your phone is not in list or a member of second option being 'Vodaphone' and neither have it -
I would recommend using a retail store to unlock....
Click to expand...
Click to collapse
I know it wasn't in the title, I thought it said at the top Unlock phone by rooting at the top of the post. Also, my phone is factory unlocked.
Jack
This seems familiar, AHA I WROTE MOST OF IT lol
Sent from my GT540 using XDA App
Produced by Stryker’s Lounge AUS
Original Guide by aaa801
ermm why did you remove the original guide credit..
Does everything work with this/these updates? anny (negative) effects on e.g. battery life?
aaa801 said:
Produced by Stryker’s Lounge AUS
Original Guide by aaa801
ermm why did you remove the original guide credit..
Click to expand...
Click to collapse
I've reported this post as copyright infringing and said you are the rightful owner of this article. Hopefully XDA Admins sort it out.
Jack
JackG256 said:
I've reported this post as copyright infringing and said you are the rightful owner of this article. Hopefully XDA Admins sort it out.
Jack
Click to expand...
Click to collapse
-.- i just want the credits to be left in like every other forum did -.-
With Compliments
aaa801 said:
This seems familiar, AHA I WROTE MOST OF IT lol
Sent from my GT540 using XDA App
Click to expand...
Click to collapse
Thank you aaa801, As I said great first guide write-up, we fix tweaks up now and then that have been written because people overlook things, do not account for updates in their tweaks or forget that people are 'Novice Users'
Its not a good unless it works top to bottom....
My suggestion is to write it as you are doing it to guarantee that nothing is overlooked...
I could not suggest site of original post because they compete with this site..
..........
LEN
Only one don't use 'Lock Similar Card' drops you off provider
There are no problems batterylife is same don't forget to follow the setups guide after done 'Performance Setup CyanogenMod Settings' found in xda
Sent from my GT540 using XDA App
yer when i was writing the guide i had fastboot etc all in my path as i like screwing with android phones etc
nice rewrite tho, much easier for the newbs
btw the original guide was on modaco and they post links to xda there so i see no problem with saying that here
the headset button on mine doesn't work.. is this a known?
DingIsBack said:
the headset button on mine doesn't work.. is this a known?
Click to expand...
Click to collapse
Yes, that's a known bug with SwiftDroid
Sent from my jv02 using XDA App
Suddenly I saw that my hardware every data was remove how it?what can i do now?
answer to the problem
HI
I understand that this might happen with a lot of us, but u need not to worry.
if the data is still there in your system, then you can try system restore. it should get all the data back.
please follow the steps mentioned below.
1. Open the Start Menu.
A) Click on All Programs, Accessories, System Tools, and System Restore. (See screenshot below)
B) Go to step 4.
OR
2. Open the Control Panel (All Items View).
A) Click on the Recovery icon.
B) Click on the Open System Restore button.
C) Go to step 5 or 6 below.
OR
3. Open the Start Menu.
A) Right click on the Computer button and click on Properties.
B) Click on the System Protection link.
C) Close the System window.
4. Click on the System Restore button.
5. If You Have Not Done a System Restore Before
A) Click on the Next button.
B) Go to step 7.
6. If You Have Done a System Restore Before
A) Select (dot) Choose a different restore point, and click on the Next buton.
7. Select (click on) a listed restore point that you want to restore Windows 7 back to.
NOTE: Check the Show other restore points box to see any restore points (older) that may not be listed here.
8. To Show Affected Programs and Drivers
NOTE: This will show you a list of programs and drivers that will be deleted and restored by the selected restore point.
A) Click on the Show affected programs and drivers button.
B) When done reviewing, click on the Close button.
9. Click on the Next button.
NOTE: Make sure that the restore point you want is still selected.
10. Click on the Finish button.
11. Click on Yes to confirm.
WARNING: This will immediately restart your computer to finish the system restore.
12. After the computer has restarted, click on the Close button
Thanks & regards
Paras
help me pls...
anyone can help me pls...
can you share CD installer Xda lls pls. my CD broken i needed so badly..
thank you very much in advance....
godbless you...
Hi,
Got this spaking i9505 s4, but it seems the *#197328640# service mode is missing, im using this mode to select wcdma band, In my S2 it is there.
Did samsung removed : *#197328640#, if yes how do we access wcdma select band?
Also *#2263# is not working
Thanks,
Roy
Same problem here!
Service mode:
*#0011#
Options*--> back
Options -->key input -->1
Black screen with number 1 up on the left
buy samsung service mode apk
buy samsung service mode apk from the play store
bernny26 said:
buy samsung service mode apk from the play store
Click to expand...
Click to collapse
Service mode is not working, I can get in to what says service mode but then back does not work abd it stuck in some sort active data mode.
docurley said:
Service mode is not working, I can get in to what says service mode but then back does not work abd it stuck in some sort active data mode.
Click to expand...
Click to collapse
I did read that its modem related?
this post says so?
http://forum.xda-developers.com/showpost.php?p=42550422&postcount=3539
rodnah said:
I did read that its modem related?
this post says so?
http://forum.xda-developers.com/showpost.php?p=42550422&postcount=3539
Click to expand...
Click to collapse
Well I tried the modem reflash and still no Service mode just the same old screen shot each time.
docurley said:
Well I tried the modem reflash and still no Service mode just the same old screen shot each time.
Click to expand...
Click to collapse
Did you manage to solve this? I'm stuck at the same point. Menu -> back doesn't do anything at all.
TY
squaredd said:
Did you manage to solve this? I'm stuck at the same point. Menu -> back doesn't do anything at all.
TY
Click to expand...
Click to collapse
No I did not I ended up selling the phone as I wanted to change networks but I could not unlock the pjone.
Ei.. any fix for this?
i BELIEVE this is part of Samsung's "business strategy".. i was resolve this using the Samsung Service Mode apk (which I cracked and patched :highfive, however i have another issue related to this (see attached pic)!
In this case...may i ask if anyone from XDA knows the secret code for the UMTS Menu for me to access the Network Unlock menu???
RESOLVED thru SERENDIPITY!
mrryanangeles16 said:
i BELIEVE this is part of Samsung's "business strategy".. i was resolve this using the Samsung Service Mode apk (which I cracked and patched :highfive, however i have another issue related to this (see attached pic)!
In this case...may i ask if anyone from XDA knows the secret code for the UMTS Menu for me to access the Network Unlock menu???
Click to expand...
Click to collapse
Hi XDA Peeps!
I was able to unlock my i9505!
I just did the following steps:
1. Dial *#0011# via Phone Utility apk [Phone Connectivity Status will appear (via Service Mode)];
2. Tap on the left soft key (LSK) and select Key Input > Enter 1 > Hit OK;
3. Tap on the LSK and select BACK [You're now just a few steps away!];
4. Tap on the LSK and select Key Input > Enter 1 > Hit OK [Your screen shall have a different output now (i.e., a single digit "1" on line 1)];
5. WAIT for 5 seconds until the UMTS MAIN MENU appears > Select Debug Screen > Select Phone Control > Select Network Lock;
6. Next, tap on: [3] PERSO SHA256 OFF;
7. From here, go back to the UMTS MAIN MENU by tapping on Menu (left soft key on SGS4) and selecting Back from the options;
8. Once you are in the UMTS menu, tap on: [6]COMMON;
9. There, select: [6]NV REBUILD;
10. Now in the NV Rebuild menu, tap on: [4] Restore Back-up;
11. Samsung Galaxy S4 will now go into a temporary freezing state. After a while you’ll see some activities. The screen will be black and the LED will turn Blue. The Menu and Back key button on phone will also light;
12. Lastly, your Samsung Galaxy S4 will reboot automatically and will take a minute or two in booting up (depending on your ROM's Boot Animation);
BOOM! Your Galaxy S4 GT i9505 is now SIM-unlocked! Try a SIM card from another carrier to confirm the process and do not forget to share this to your friends too!
XDA_AndioAngeles
FB: facebook.com/rmasr.angeles
Does not work on samsung secure boot devices
mrryanangeles16 said:
Hi XDA Peeps!
I was able to unlock my i9505!
I just did the following steps:
1. Dial *#0011# via Phone Utility apk [Phone Connectivity Status will appear (via Service Mode)];
2. Tap on the left soft key (LSK) and select Key Input > Enter 1 > Hit OK;
3. Tap on the LSK and select BACK [You're now just a few steps away!];
4. Tap on the LSK and select Key Input > Enter 1 > Hit OK [Your screen shall have a different output now (i.e., a single digit "1" on line 1)];
5. WAIT for 5 seconds until the UMTS MAIN MENU appears > Select Debug Screen > Select Phone Control > Select Network Lock;
6. Next, tap on: [3] PERSO SHA256 OFF;
7. From here, go back to the UMTS MAIN MENU by tapping on Menu (left soft key on SGS4) and selecting Back from the options;
8. Once you are in the UMTS menu, tap on: [6]COMMON;
9. There, select: [6]NV REBUILD;
10. Now in the NV Rebuild menu, tap on: [4] Restore Back-up;
11. Samsung Galaxy S4 will now go into a temporary freezing state. After a while you’ll see some activities. The screen will be black and the LED will turn Blue. The Menu and Back key button on phone will also light;
12. Lastly, your Samsung Galaxy S4 will reboot automatically and will take a minute or two in booting up (depending on your ROM's Boot Animation);
BOOM! Your Galaxy S4 GT i9505 is now SIM-unlocked! Try a SIM card from another carrier to confirm the process and do not forget to share this to your friends too!
XDA_AndioAngeles
FB: facebook.com/rmasr.angeles
Click to expand...
Click to collapse
This method does not work if your base band has been upgraded to I9505XXUBMG7 wish i had know what samsung was planning i would of done the unlock before upgrading. oh well the power of hind sight i suppose :crying:
I tried this...but when I put in the (star) #0011# the next screen says
"No Service"...what does that mean?
dorian2kx said:
I tried this...but when I put in the (star) #0011# the next screen says
"No Service"...what does that mean?
Click to expand...
Click to collapse
Same problem. Did you manage to sort this?
bump
any resolution? I get {connection problem or code MMI not valid}
UMTS Never appears for me unless I do this on my i545
Enter Phone Menu ..
* # 27663368378 #
[1] UMTS
[2] DEBUG
[6] PHONE CONTROL
[6] NETWORK LOCK
[3] PERSOSHA256 OFF
On this step off #3 is not a choice for me
MENU> BACK 3 TIMES .. [UMTS MAIN MENU]
[6] COMMON
[6] NV REBUILD
If it says GOLDEN-BACKUP exists ..
[4] RESTORE BACK-UP
any assistance is greatly appreciated
i545
Enter Phone Menu ..
* # 0011 #
press [menu]
press back
press [menu]
press key input
press Q
press [menu]
press 0000
wait for 30 seconde
winny57 said:
Enter Phone Menu ..
* # 0011 #
press [menu]
press back
press [menu]
press key input
press Q
press [menu]
press 0000
wait for 30 seconde
Click to expand...
Click to collapse
Improved your post. Worked for me, thanks!
*#0011#
Press [MENU]
press [Back]
press [MENU]
Press [Key Input]
Input [Q]
press [MENU]
Press [Key Input]
Input [0000]
Wait 30 Seconds.
If you get "0", exit the ServiceMode and restart.
no probleme
Still nothing on i545
Hello everybody! I have searched for all the topics talking about How to your S III to Lollipop 5.1.1? So i'm here today to show you the complete steps to:
I - Root your Phone.
II - Flashing the recovery Mode.
III - Installing the ROM in your device.
IIII - Enjoying the Lollipop 5.1.1
HTML:
WARNING:
-I'm not responsable for any damage can caused in your device or losing your SD Card. Everything is working fine in my device.
I - Root your phone:
Rooting your device is so easy that means to give your OS a new options contains Flashing ROMs
So to root your phone you need a PC and a software called Odin. First search on it and download it
After downloading software: to open it:
1) Right Click on the Winrar ZIP.
2) Choose "extract files" option.
3) Then you'll have a folder open it.
4) Right Click on Odion.exe (application)
5) Choose "Run as administartion".
6) The Proogram will be opened.
7) Next to complete the rest of rooting you should get the access to download in your device by :
_Click the "-" Volume button + Power Button + Home Button together for a little while.
_ Then click "+" Volume Button.
8) Now Connect your PC with your device using USB cable then wait windows installs drivers (for 10 or 20 secs) and you'll see a blue case in the left corner upper.
9) Click on "PDA" Button and search the file "CF-Root".
10) Click on "Start" button after few minutes Odin will show in the up of the bleu square "RESET!"
If everything is done like the above steps then Reboot your phone and remove the USB cable . then you'll see a new application added called "Super SU" that means your device rooted successfully
Note: if you are not seeing the "CWM" on your device that means the "ClockWorkMod" application not installed yet so you must download it by the following steps:
1) Go to the PlayStore and write in the search bar: "Rom Manger".
2) Then you'll see "Rom Manager" application download it.
II - Flashing the recovery Mode:
So after you downloadthe clockworkmodmod application now you have to install the recovery on your device to do that:
1) Open the applicaion installed.
2) Choose the first option "Flash ClockWorkMod Recovery".
3) Choose your phone's name from the list once you find it, click on it.
4) Once the installing finished, Power off your phone
_Click "+" Volume Button + Power Button + Home Button simultanity (to ckeck the result).
And now the last part of all this.
III- Installing the ROM on your device:
Note: you must have a SD Card of 2GB or more
First thing to install the ROM you need to download GAPPS (Google Apps) and the ROM
Why we are needing GAPPS?
GAPPS is the complitation of google Apps on the new ROM.
You can download them from any website
After downloading them as a Winrar ZIP on your PC copy them and past them on your SD Card. Now to flash everything and install Lollipop on your Android device:
1) Put your SD Card on your device.
2) Click on "+" Volume Button and the power button and the home button in the same time.
3) The ClockWorkMod Recovery will open
_Go to "Wipe data/cache " option and click on it by the power button, then Select YES.
_ The Same thing in "Wipe cache" option.
Currently your device is wipped or formatted
Now Flash Your ROM:
_ Go to "install ZIP from SD Card " option, Select your ROM that u installed it on your SD Card by the power button.
_then the same thing to installing GAPPS.
Once Everything is done and you see "installing complete", Reboot your system now (open your device)
Finally your device is upgrading to Lollipop 5.1.1!
So yeah! that's all, Thank you for your support and we hope this work be helpful!! :laugh:
Reb0t said:
Hello everybody! I have searched for all the topics talking about How to your S III to Lollipop 5.1.1? So i'm here today to show you the complete steps to:
I - Root your Phone.
II - Flashing the recovery Mode.
III - Installing the ROM in your device.
IIII - Enjoying the Lollipop 5.1.1
HTML:
WARNING:
-I'm not responsable for any damage can caused in your device or losing your SD Card. Everything is working fine in my device.
I - Root your phone:
Rooting your device is so easy that means to give your OS a new options contains Flashing ROMs
So to root your phone you need a PC and a software called Odin. First search on it and download it
After downloading software: to open it:
1) Right Click on the Winrar ZIP.
2) Choose "extract files" option.
3) Then you'll have a folder open it.
4) Right Click on Odion.exe (application)
5) Choose "Run as administartion".
6) The Proogram will be opened.
7) Next to complete the rest of rooting you should get the access to download in your device by :
_Click the "-" Volume button + Power Button + Home Button together for a little while.
_ Then click "+" Volume Button.
8) Now Connect your PC with your device using USB cable then wait windows installs drivers (for 10 or 20 secs) and you'll see a blue case in the left corner upper.
9) Click on "PDA" Button and search the file "CF-Root".
10) Click on "Start" button after few minutes Odin will show in the up of the bleu square "RESET!"
If everything is done like the above steps then Reboot your phone and remove the USB cable . then you'll see a new application added called "Super SU" that means your device rooted successfully
Note: if you are not seeing the "CWM" on your device that means the "ClockWorkMod" application not installed yet so you must download it by the following steps:
1) Go to the PlayStore and write in the search bar: "Rom Manger".
2) Then you'll see "Rom Manager" application download it.
II - Flashing the recovery Mode:
So after you downloadthe clockworkmodmod application now you have to install the recovery on your device to do that:
1) Open the applicaion installed.
2) Choose the first option "Flash ClockWorkMod Recovery".
3) Choose your phone's name from the list once you find it, click on it.
4) Once the installing finished, Power off your phone
_Click "+" Volume Button + Power Button + Home Button simultanity (to ckeck the result).
And now the last part of all this.
III- Installing the ROM on your device:
Note: you must have a SD Card of 2GB or more
First thing to install the ROM you need to download GAPPS (Google Apps) and the ROM
Why we are needing GAPPS?
GAPPS is the complitation of google Apps on the new ROM.
You can download them from any website
After downloading them as a Winrar ZIP on your PC copy them and past them on your SD Card. Now to flash everything and install Lollipop on your Android device:
1) Put your SD Card on your device.
2) Click on "+" Volume Button and the power button and the home button in the same time.
3) The ClockWorkMod Recovery will open
_Go to "Wipe data/cache " option and click on it by the power button, then Select YES.
_ The Same thing in "Wipe cache" option.
Currently your device is wipped or formatted
Now Flash Your ROM:
_ Go to "install ZIP from SD Card " option, Select your ROM that u installed it on your SD Card by the power button.
_then the same thing to installing GAPPS.
Once Everything is done and you see "installing complete", Reboot your system now (open your device)
Finally your device is upgrading to Lollipop 5.1.1!
So yeah! that's all, Thank you for your support and we hope this work be helpful!! :laugh:
Click to expand...
Click to collapse
Hi Thanx, where to download the ROM package from?
ukchy123 said:
Hi Thanx, where to download the ROM package from?
Click to expand...
Click to collapse
Hi, Sorry but i can't add outside links that's why i didn't put links to download. (you know XDA rules :crying: )
Lollipop ROMs
[INDEX] Galaxy S3 - ROMs, Kernels, MODs, GUIDES [19/01/16]
Look there, to find a Lollipop ROM for S3.
Yes you can find there.
Trafalgar Square said:
[INDEX] Galaxy S3 - ROMs, Kernels, MODs, GUIDES [19/01/16]
Look there, to find a Lollipop ROM for S3.
Click to expand...
Click to collapse
yes you can find in this link.
Hi, i am sorry i need some one help here, i got my No.1 D5, and i was trying to add watch face from inside the watch using the (+), i chose the one i want, download start and installing message confirmation is ok, then a black one (nothing there) added to the faces list, when i chose it there is only black screen, touch swip is not working, long press the btn show the normal options, i can power off and power on, but gain once powered on the face is black.
thanks in advance
SerdarS said:
Hi, i am sorry i need some one help here, i got my No.1 D5, and i was trying to add watch face from inside the watch using the (+), i chose the one i want, download start and installing message confirmation is ok, then a black one (nothing there) added to the faces list, when i chose it there is only black screen, touch swip is not working, long press the btn show the normal options, i can power off and power on, but gain once powered on the face is black.
thanks in advance
Click to expand...
Click to collapse
I have the same problem!! Help us!! Thanks
please try to reset the watch
lizeyan said:
please try to reset the watch
Click to expand...
Click to collapse
how please?
clarkcool said:
how please?
Click to expand...
Click to collapse
Hi all,
try to next steps:
download the official D5 firmware package from the manufacturer's website
unzip all file
turn off the smartwatch (do not connect to the pc)
run the flash_tool.exe (run as administrator)
select the download tab
browse the download agent and scatter loading file (include the firmware pack)
select the download only mode
click the Download button
connect the D5 to the PC, but do not turn on!!!
wait until the end of the "download" process (about 1 minute)
turn on D5 and be happy
Dam Im on Window$ 10 64 Bit and cant get it working. Any suggestions?