Related
Brief: Back up All - Contacts & Data (Remove Sim Card)
[Unlock Phone] [Install 'z4root.1.3.0.apk' 955.48kb] [Install 'Rom Manager' Android Market][Install 'Superuser' Android Market]
Ok the way we are doing this is
2.1 -> 2.2 fastboot -> 2.3.3
Start -
First Install Driver on PC:
'LGAndroidDriver_WHQL_ML_Ver_1.0_All_Win7'
Download this Link to PC: KDZ Updater Europe Open.zip 144mb
Put your phone into Download Mode
1. Take out 'Battery'
2. Put in 'Battery'
3. Hold down 'volume down' and hit 'Power-on'
4. The screen should display 'Download mode'
5. Plug in 'USB'
Extract KDZ Updater Europe Open.zip to your PC/Laptop
1. Run 'kdz_fw_upd'
2. Choose '3gqct' as the 'Type'
3. Choose 'Diag' as the mode
4. Click 'File icon' and select 'Europe Open+Fastboot.kdz'
then hit Launch Software Update
Please note: that you DO NOT have to let this flash finish (BUT IT IS EXTREMLY RECOMMENDED.. takes forever on this rom tho lol)
as we only need the fastboot part of it so leave it flashing for a few mins then remove the phone the updater software will come up with a few errors but just ignore them
Ok now we need the latest Recovery version of the swiftdroid software
Since i used 1.8 i will use this in this tutorial
Download Gingerbread 2.3.3 SwiftDroid_v1.9 95.2Mb
Ok extract the above file to your Pc/Laptop
Now take the 'update.zip' file from extracted folder and copy it to the root of your phones 'SD card'
Now put your phone into fastboot mode
1. Take out 'Battery'
2. Put in 'Battery'
3. Hold in 'Camera button' and press 'Power-on'
4. Keep camera button pressed until 'logo' disappears and it shows a 'blank screen'
5. Make sure phone is plugged into USB
Now open where you extracted folder the above archive (Gingerbread 2.3.3 SwiftDroid_v1.9)
1. Open 'CMD' within folder
2. Type 'flash_recovery.bat' to run
What this does is flash cyanogenmod recovery to your phone
which is a great tool for updating firmwares and restoring from bricks
Now we will put the phone into 'recovery mode'
1. Take out 'Battery'
2. Put in 'Battery'
3. Hold down 'Home button' and press 'Power-on'
4. Keep holding down the 'Home button' until the cyanogenmod recovery menu pops up (it takes a while.)
Now to install the 2.3 rom
1. Press the 'volume' down until 'install zip from sdcard' is selected
2. Then press the 'camera button'
3. Then press the 'camera button' on 'apply /sdcard/update.zip'
4. Then Press the 'volume' up and choose 'yes' and press the 'camera button'
Now this part will take a while (around 5-10mins)
it will say flash complete! when finished and will return to menu once done.
Menu will come back up...
Hit your 'Back button' and select 'reboot system now'
-------------------------------------------------------------------------
Note: if your phone hangs after reboot - I would like you to do below because you have ran out of room on your 'Internal memory' or 'Conflict'
Recovery Mode
1. Take out 'Battery'
2. Put in 'Battery'
3. Hold down 'Home button' and press 'Power-on'
4. Keep holding down the 'Home button' until the cyanogenmod recovery menu pops up (it takes a while.)
Wipe Data/Factory Reset
1. Press the 'volume' down to 'Wipe Data/Factory Reset'
2. Then Press the 'volume' up and choose 'yes' and press the 'camera button'
Now restart back at top of this page write-up
Put your phone into Download Mode
1. Take out 'Battery'
2. Put in 'Battery'
3. Hold down 'volume down' and hit 'Power-on'
4. The screen should display 'Download mode'
5. Plug in 'USB'
-------------------------------------------------------------------------
Tips..
When it loads it will ask you to slide the keyboard( lol what keyboard) the workaround this is to exit out of that part and sign in with ur google login in the market this will activate all the google apps and give you options to download gmail etc
Produced by Stryker’s Lounge AUS
Original Guide by aaa801 (good effort for first guide)
You have any video it is very clumsome for me please upload any
Sent from my GT540 using XDA Premium App
Ummm you forgot to provide any download links for the files you mentioned in the post. No use without those.
Getting Widgets Working in Android version 2.3.3
Home – Setting – Applications – Manage applications
Under Downloaded:
Look for Widgets you want to use on phone desktops
Click ‘Move to Phone’
Reboot Phone after..
Now Long-press Desktop
Select Widgets and Scroll and select
By Stryker's Lounge AUS
Thank you for your responce, I have included the MB, KB etc
Just copy/paste program as is on search web and download exact MB,KB
We are new here so I have to wait for 9 before I can come back and readd Links
Hope this helps...
p.s careful of downloads not exact MB or KB they are fake/trojans
Rooting doesn't unlock the phone and also you don't need to install ROM Manager, the GT540 doesn't support it.
Jack
HQRaja said:
Ummm you forgot to provide any download links for the files you mentioned in the post. No use without those.
Click to expand...
Click to collapse
Download links are available just hit search......
Sent from my GT540 using XDA App
JackG256 said:
Rooting doesn't unlock the phone and also you don't need to install ROM Manager, the GT540 doesn't support it.
Jack
Click to expand...
Click to collapse
Thanks JackG256,
The title of cause does not state anything about unlocking phones but however if you
go to Stryker's Lounge AUS Facebook...
Stroll down to bottom the last on current and older posts you'll find two free options but if your phone is not in list or a member of second option being 'Vodaphone' and neither have it -
I would recommend using a retail store to unlock....
bretthutton said:
Thanks JackG256,
The title of cause does not state anything about unlocking phones but however if you
go to Stryker's Lounge AUS Facebook...
Stroll down to bottom the last on current and older posts you'll find two free options but if your phone is not in list or a member of second option being 'Vodaphone' and neither have it -
I would recommend using a retail store to unlock....
Click to expand...
Click to collapse
I know it wasn't in the title, I thought it said at the top Unlock phone by rooting at the top of the post. Also, my phone is factory unlocked.
Jack
This seems familiar, AHA I WROTE MOST OF IT lol
Sent from my GT540 using XDA App
Produced by Stryker’s Lounge AUS
Original Guide by aaa801
ermm why did you remove the original guide credit..
Does everything work with this/these updates? anny (negative) effects on e.g. battery life?
aaa801 said:
Produced by Stryker’s Lounge AUS
Original Guide by aaa801
ermm why did you remove the original guide credit..
Click to expand...
Click to collapse
I've reported this post as copyright infringing and said you are the rightful owner of this article. Hopefully XDA Admins sort it out.
Jack
JackG256 said:
I've reported this post as copyright infringing and said you are the rightful owner of this article. Hopefully XDA Admins sort it out.
Jack
Click to expand...
Click to collapse
-.- i just want the credits to be left in like every other forum did -.-
With Compliments
aaa801 said:
This seems familiar, AHA I WROTE MOST OF IT lol
Sent from my GT540 using XDA App
Click to expand...
Click to collapse
Thank you aaa801, As I said great first guide write-up, we fix tweaks up now and then that have been written because people overlook things, do not account for updates in their tweaks or forget that people are 'Novice Users'
Its not a good unless it works top to bottom....
My suggestion is to write it as you are doing it to guarantee that nothing is overlooked...
I could not suggest site of original post because they compete with this site..
..........
LEN
Only one don't use 'Lock Similar Card' drops you off provider
There are no problems batterylife is same don't forget to follow the setups guide after done 'Performance Setup CyanogenMod Settings' found in xda
Sent from my GT540 using XDA App
yer when i was writing the guide i had fastboot etc all in my path as i like screwing with android phones etc
nice rewrite tho, much easier for the newbs
btw the original guide was on modaco and they post links to xda there so i see no problem with saying that here
the headset button on mine doesn't work.. is this a known?
DingIsBack said:
the headset button on mine doesn't work.. is this a known?
Click to expand...
Click to collapse
Yes, that's a known bug with SwiftDroid
Sent from my jv02 using XDA App
I thought I would write this guide to help people who are having trouble with getting ICS to work reliably on their Galaxy Note. This guide is fairly beginner friendly but I do recommend that you quickly go through this once before you start. Also, this is a 'risk free' way of trying the ICS leak. You just need to have a nandroid backup from your current clockworkmod (or red-pill recovery) to try this out. If you do not like it, instructions are included on how to restore back to your Ginger Bread ROM. Hit the THANKS button if this helps. Happy Flashing!
Edit. CLICK HERE for my earlier thread demoing ICS on the Note. It has 3 videos that add up to 40 mins.
Edit 2. In case you have any trouble with the ROM and want to get back, I have now included a 'Getting back to your old Ginger Bread ROM' section in the end thanks to chasmodo. I do suggest that you read through for some user reports or better yet, try it yourself!
Edit 3. The guide now includes instructions to get TeamRocketROM ICS and criskelo's ICS ROM. I have had mixed results with these two ROMs. But feel free to try them out and see if they will work well for you. You will HAVE to install the CF repack ICS to be able to install other ICS ROMs. So follow the steps from section (2) until step 10 and choose either Section (4A) or (4B). A shout out to TeamRocket and criskelo. Original Thread for TeamRocketROM and Original Thread for criskeloROM.
Edit 4. MediaFire links for the essential files are now up. They are split into 200mb rar files. You will need WinRAR to extract them.
Index :
Section (1) Requirements
Section (2) Chainfire's ICS repack installation
Section (3) Bloatware List
Section (4A) TeamRocketROM installation
Section (4B) CriskeloROM installation
Section (5) Getting back to your old Ginger Bread ROM
Section (6) Recommended apps
Section (7) Tips, tricks & troubleshooting.
Section (1) : Requirements.
1) A Galaxy Note, obviously. It HAS TO BE model GT-N7000 (International) and NOT SGH-i717 (AT&T).
2) Samsung Kies, because it includes the latest Samsung drivers. Google it, download and install.
3) Stock GB ROM with a good radio. We are using a KKA for this. It is easily rootable AND it has a great radio. I have also included ODIN for convenience. CLICK HERE. | MIRROR | MF-Part1 | MF-Part2 | MF-Part3
4) Chainfire's CF-Root kernel/clockworkmod for KKA. CLICK HERE. | MIRROR | MF
5) Mobile ODIN Lite and files required to flash ROMs in one pack. OR you can get Mobile ODIN Pro from Market and support Chainfire's efforts. CLICK HERE. | MIRROR | MF
Note. Chainfire is one of the most prolific Android developers/reverse engineers and it will be worth every penny if you donate/buy his apps.
6) Chainfire's ICS repack. This includes CF-root kernel and clockworkmod. Package also includes the google apps zip. CLICK HERE. | MIRROR | MF-Part1 | MF-Part2 | MF-Part3
Check below for additional requirements for TeamRocketROM or criskelo ROM.
////// EXTRA REQs for TeamRocketROM //////
****ONLY IF YOU WANT TEAMROCKETROM******
Edit. MediaFire links are up for RocketROM.
1) TeamRocketROM ICS v1.4 CLICK HERE | MIRROR2
2) TeamRocketROM ICS v1.5 CLICK HERE | MIRROR2 | MIRROR3
3) 15 Button Toggle Bar CLICK HERE *OPTIONAL but recommended* CLICK HERE
Mediafire links (includes all 3 of the above files) :
MF-Part1 | MF-Part2 | MF-Part3 | MF-Part4
NOTE : You NEED to download BOTH v1.4 and v1.5 for installing v1.5.
////// EXTRA REQs for criskelo ICS ROM //////
****ONLY IF YOU WANT CRISKELO ROM******
1) Criskelo's ICS beta 1 ROM CLICK HERE | MIRROR2 | MIRROR3
Section (2) : Chainfire's ICS repack installation.
1) Your current firmware does not matter. It could be stock, stock & rooted, newer stock & ever-rooted, sammobile ICS, whatever. It's OK even if you're in a boot-loop or plain brick. It does not matter. But be prepared to loose all your app data and also maybe the files on the INTERNAL sd of the phone. This is MEANT as a clean, fresh install. Although you will get back most of the essential stuff once you logon to you google account on the new ICS.
2) MAKE SURE YOU HAVE ATLEAST 50% CHARGE.
3) Extract the file named " N7000XXKKA_N7000OXXKK5_AUT.rar". You will find three files there, .DLL, .TAR.MD5, .ZIP. Extract the zip file. Right click on 'Odin3 v1.85.exe' and click 'Run as administrator'.
4) Now you need to put your phone in Download mode. Turn off your phone if it is on. Hold volume down, home and power together and keep holding them until you see a screen that says Warning on top with a yellow warning symbol. As soon as you see the screen, you need to push the volume UP button to get into download mode. If you miss it, try holding down the three buttons and repeat. The download screen has an android with 'Downloading...' written in the bottom.
5) Now that you are in download mode, go ahead and connect the Note to your computer. If you installed Kies correctly, it will install the drivers for the new hardware and say that the device is ready for use. Now, on the ODIN screen you should see "Added" in the 'Message' window on the left. Now, click the "PDA" button and select the file that ended with .TAR.MD5. Make sure ONLY "Auto reboot" and "F. Reset Time" are checked. Say start and the flashing should begin. DO NOT INTERRUPT THIS UNTIL IT IS COMPLETED.
6) Once the flashing ends, your phone will reboot. Give it upto 5 minutes because it is the first boot. If it is stuck in a boot loop (or if things are force closing on the setup screen), hold down volume UP, home and power button together until you get into the recovery menu. Navigate the recovery using volume and home buttons. Now select the "Wipe data/Factory Reset option", select the Yes option and proceed to wipe the phone. Once done, select the reboot option and your phone should turn on now. Do not setup any accounts and just click through the setup screens. Reboot the phone.
7) Now you have a nice clean stock ROM. We will proceed with the rooting now. Go to settings and 'Applications' and enable 'Unknown sources', then go to 'Development' and enable "USB debugging". Now extract the file " InitialCFRootFlasherKKA". You will see a "not-rooted-yet.bat". Right click and run as administrator. Click enter to continue and now it should say "--- STARTING ---" and "found a samsung" and all that. If you get to the part where it tells you that it is going to flash the cf-root kernel too fast, the adb server probably failed to start. So, you need to close the bat file and run it again as admin. If everything goes right you should see the zergRush exploit in action and after some time it will tell you that it will attempt to flash cf-root kernel. Hit enter, it will flash the kernel and reboot. Congratulations, you now have root and clockworkmod.
7b) PERFORM A NANDROID BACKUP (optional but recommeded) : Turn your phone off. Hold volume UP, menu and power until you reboot into clockworkmod recovery. Go to 'backup and restore' and select backup. Clockworkmod will now create a nandroid backup of your rooted GB rom. So if you decide to g back to GB or try out different ICS roms, this will be really helpful.
8) Now we need to install Mobile ODIN Lite. Extract the file "Mobile_ODIN_Lite_GTN7000". You will see two apks. Now extract "CF_ICS_REPACK_GAPPS_INCL". You will see a .TAR and .ZIP. DO NOT EXTRACT ANY OF THESE FILES. Transfer all these files to your sd card using USB. You can go to 'Wireless and network' menu in settings and then 'USB utilities' to enable mass storage.
9) Using the included 'My Files' app, navigate to the apks. (Note. If you put your files in the external sd there is a folde called "external_sd" in My Files to take you there.) Install " MobileODINLite-v2.15" and then install " MobileODIN_FlashKernel_N7000-v2.0". Now launch Mobile ODIN. It should ask for su permissions and select "Allow" make sure the "remember" option is checked. Select 'Open file' and navigate to wherever you put the "I9220LP1-N7000-ICS-REPACK.tar" file transferred earlier. It should say that it has loaded the file. You will notice the 'Modem' and 'Param' fields are empty, that is fine. Scroll down to 'Flash firmware' and select 'Continue'. Mobile ODIN will boot into recovery and proceed with the flashing. DO NOT INTERRUPT THIS UNTIL IT IS COMPLETED.
### OPTIONAL STEP *ONLY* FOR ROCKETROM/CRISKELO-ROM : Once the flashing is complete, it will take you to clockworkmod. Perform a 'wipe data/factory reset'. Reboot. *SKIP TO SECTION 4A/4B* for further instructions.
10) Once the flashing is complete, it will take you to clockworkmod. DO NOT REBOOT. Navigate the recovery using volume and home buttons. Select 'Install zip from sdcard' and then 'choose zip from sdcard', navigate to 'gappsv7.1.zip.' Proceed to install the zip. Navigate back to main menu and select 'wipe data/factory reset' and say yes. Now select 'reboot system now'.
11) You should now have a stable, rooted ICS. BUT we need to get rid of all the bloatware before we can proceed. There is no set up screen. If your screen in all black when it boots up, that is fine. Reboot the phone. Reboot it again, just to be sure. Get Titanium Backup free either with market, or with the apk. You will need to set up your google account before you can download through market. Once you have Titanium Backup, the clean up begins. You will need to enable 'Unknown sources' under 'Security' and 'USB debugging' under 'Development' before you can use Titanium Backup.
12) Launch Titanium Backup it will ask for root and allow it. Click through the popups. Click the Backup/Restore tab. We begin from all the way dowm, so scroll down all the way. You can uninstall an app by clicking on the app and selecting "Un-install !" option. Click OK on any warnings you will see. Below is a list with the apps that I personally like to remove. It includes the "Samsung Hubs" because they mostly serve Chinese content.
Section (3) : The Bloatware list
-Two apps with Chinese characters at the very bottom.
-Zinio
-Youko
-wikiAR
-weibo
-VIVA magazine
-Trim
-TaoBao
-Straight Flush
-Software update (BOTH of them)
-Social Hub (BOTH)
-SNSAccountRr
-SNSAccountQz
-SNS disclaimer
-Sina weather, stock & news.
-RenRen
-Readers Hub
-Qzone
-QQ Browser AND QQ
-PressReader
-Palmenews & palmebook
-Navigation (This is NOT google navigation)
-Music Hub
-Media Hub
-Kobo
-Dictionary
That's it! Restart your Note and you should have a great, fully-functional ICS ROM! This procedure has been thoroughly tested by me and works every time. ALSO scroll down to check out the recommended apps for better functionality.
Section (4A) : TeamRocketROM ICS installation
****THIS SECTION IS TO BE FOLLOWED ONLY IF YOU WANT TEAMROCKETROM******
1) Once you are done with step 10 from Section (2) you should have the CF repack which forms the base for a lot of other ICS ROMs out there. So you absolutely NEED the cf repack running. If you don;t have it, go back to Section (2) and follow steps from 1 through 10.
2) Transfer the files "TeamRocketRom_ICS_Notev1.4_beta", "TeamRocketRom_ICS_Notev1.5_beta" and "Reworked_15ToggleBar_for_TeamRocketROM_v1.5" to you internal or micro sd. DO NOT UNZIP THEM. Turn off your phone and hold down volume UP, menu and power until you boot into clockworkmod recovery.
3) Now you need to perform a full wipe. Select "wipe data/factory reset" and yes. Now select "wipe cache" and select Yes. Go to advanced > Wipe dalvik cahe > Yes. Select back to go back to main menu.
4) Select "install zip from sd card" > choose zip from sd card > now navigate to the "TeamRocketRom_ICS_Notev1.4_beta" file. Remember it is *1.4*. Slect the file and proceed to flashing. After it is done flashing, perform a full wipe like we did in step 3 (wipe data/factory reset, wipe cache and wipe dalvik cahe). THIS IS ABSOLUTELY ESSENTIAL.
5) Once you are done performing the full wipe, go back to the main menu and hit "reboot system now". The phone will reboot, give it some time. Once it is up and running, quickly setup your google account.
6) Now turn the phone off and hold voulume UP, menu and power to get into cwm. Select "install zip from sdcard" > choose zip from sd card > now select "TeamRocketRom_ICS_Notev1.5_beta". Remember, THIS TIME IT IS V1.5. After it is done flashing, do not do any wipes. Go back to main menu and reboot the system.
7) Wait till the phone boots, it will take some time. Go settings and about to verify that you are running RocketROM v1.5. Now, for the final part.
8) Turn off your phone and hold down volume UP, menu and power until you boot into clockworkmod recovery. Select "instll zip from sd card" > "choose zip from sd card" > now select the "Reworked_15ToggleBar_for_TeamRocketROM_v1.5" zip file and let install. Once done, don't wipe anything. Go back to main menu and reboot system. Congrats! You are now running TeamRocketROM ICS v1.5.
Section (4B) : criskelo ROM ICS installation
****THIS SECTION IS TO BE FOLLOWED ONLY IF YOU WANT CRISKELO ROM******
1) Once you are done with step 10 from Section (2) you should have the CF repack which forms the base for a lot of other ICS ROMs out there. So you absolutely NEED the cf repack running. If you don;t have it, go back to Section (2) and follow steps from 1 through 10.
2) Transfer the file "CriskeloRomNOTE.vICS-V1-Beta1-MD5-79520216F3E0F9D0DC5F87EB82EBB143" to your internal / micro sd. DO NOT UNZIP. Turn off your phone and hold down volume UP, menu and power until you boot into clockworkmod recovery.
3) Now you need to perform a full wipe. Select "wipe data/factory reset" and yes. Now select "wipe cache" and select Yes. Go to advanced > Wipe dalvik cahe > Yes. Select back to go back to main menu
4) Select "install zip from sd card" > choose zip from sd card > now navigate to "CriskeloRomNOTE.vICS-V1-Beta1-MD5-79520216F3E0F9D0DC5F87EB82EBB143". Select file and proceed with installation.
5) After it is done flashing, perform a full wipe like we did in step 3 (wipe data/factory reset, wipe cache and wipe dalvik cahe), just to be sure. Go back to main menu and select reboot system now. Enjoy your criskelo ROM!
Section (5) : Getting back to your old Ginger Bread ROM :
If your having troubles and want to go back to your old GB ROM, this is how you restore. Credits to chasmodo for the instructions.
1. download AbyssNote 3.9 kernel from HERE | MIRROR. It's a flashable zip.
2. put this zip on your SD Card before you try to restore your previous system
3. when you want to restore, power off your phone
4. boot into recovery (Volume up + Home + Power)
5. chose 'install zip from SD Card'
6. navigate to your Abyss kernel zip and flash it
7. go back to the Recovery start menu
8. go to advanced/reboot recovery <--- this will reboot the phone directly to recovery
9. you will discover that you now have Hyperdroid Redpill Recovery - it comes with the Abyss kernel - it's pretty much the same thing as CWMR
10. wipe cache, dalvik, do your factory reset
11. start your restore, and it will work.
Section (6) : Recommended apps
- Go Keyboard - Great, highly customizable keyboard. Includes emoji, touch tone keypad, smileys and themes. Does not lag.
- Nova Launcher - Awesome launcher meant ONLY for ICS. Highly customizable with stock ICS look and feel. Very stable too. Includes persistent search bar, dock pages, etc. Original thread HERE.
- Winamp - Really good music player with great navigation and a good looking widget. Also includes lock-screen integration.
- Airdroid - This app is must have for anyone who want to sync their phone wirelessly over wifi. Free and awesome.
- MX Video - Excellent video player. Essential for this ROM because stock player does not function. Has great gesture controls and plays almost anything you throw at it.
- ROM Manager - ONLY IF you are having trouble with force closing apps and general freezes, get ROM Manager and run 'Fix permissions'. I recommend that you do not mess with any other option on ROM Manager unless you know what you're doing.
Section (7) : Tips, tricks and troubleshooting
-- 14 Button Toggle Bar : This is a very nifty little UI tweak by Chris X.. Original post here. It is basically a really cool looking Notification bar with a lot of toggles. I have included a screenshot below. This tweak also works on criskelo ROM. I haven't tested it with chainfire repack, but you are free to give it a try. CLICK HERE to download.
-- Get stock ICS icons for CF repack (Nova Launcher) :
For ICS icons on your Homescreen, download "Ice Cream Sandwich (theme)" by kovdev from Market. Now go back to your Nova Launcher homescreen, tap and hold the icon you want to change and hit edit. Now click on the icon, select "ADW Icon Pack" and proceed to select the appropriate icon. However, the icon will only change on the homescreen and not the app drawer.
-- SoD & Freezes : If you are getting random freezes and/or Screen of Death issues, remove your SIM and microsd, transfer all the required files to internal memory and start over. You can also try using clockworkmod or ROM manager to fix permissions.
Hit the Thanks button if this helps at all. All credit goes to everyone who deserves it. Especially Chainfire. And remember, hit the Thanks if it helps. Good day.
will this work on a non stock rom? ie. Romow v8, abyss kernal 4.0?
Im just waiting for the checkrom version of ICS
dr. xp55 said:
will this work on a non stock rom? ie. Romow v8, abyss kernal 4.0?
Click to expand...
Click to collapse
Yes. I assume you're already rooted? So you can just start from step 8. If you have a good baseband from Romow, I think you will be just fine.
toofank said:
Im just waiting for the checkrom version of ICS
Click to expand...
Click to collapse
Oh well... You can always update. ICS to ICS upgrades shouldn't be too hard.
acidburn89 said:
Install " MobileODINLite-v2.15" and then install " MobileODIN_FlashKernel_N7000-v2.0".
Click to expand...
Click to collapse
Hello,
I have mobile odin pro which downloaded something I started an app for the first time ( i think it was flash kernel, but I'm not sure) ...
Do I need to install MobileODIN_FlashKernel_N7000-v2.0 ?
And I have stock KK5 rooted, that means I can start from step 8 ?
edit: just read the official Mobile Odin page here, and the last sentence states that only Lite users have to manually download flashkernel
just follwoed all ur steps from step8 coming darky rom 3.3 worked perfectly thanks alot man!!!!!!!
Did everything from step 8, successfully flashed ICS and removed bloatware
Thanks a lot
i9000gt said:
just follwoed all ur steps from step8 coming darky rom 3.3 worked perfectly thanks alot man!!!!!!!
Click to expand...
Click to collapse
turshija said:
Did everything from step 8, successfully flashed ICS and removed bloatware
Thanks a lot
Click to expand...
Click to collapse
I'm glad I could help.
theres a problem theres no keybaord only stupid voice and when i installed ics keybaord the whole os keeps crashing. its too late for this i got work tommorow what am i to do
i9000gt said:
theres a problem theres no keybaord only stupid voice and when i installed ics keybaord the whole os keeps crashing. its too late for this i got work tommorow what am i to do
Click to expand...
Click to collapse
Did you make a backup in cwm by any chance? If you didn't, you might just wanna start from step 1 again. Trust me, it wont take long now that you have done it once. I did the whole thing over just to write the guide. Took me about 30 minutes.
Edit. Hold on a sec! Did you say you just 'installed' the keyboard? Through market, right? If you did it by market and do not alter any system files with clockworkmod or root explorer then, you can boot into cwm by volume up, home and power and wipe your device. Everything should be back to normal after that. You won't lose root.
is there no way i can download any keyboards apks? i just need it so that i can sign onto my gmail account?
i9000gt said:
is there no way i can download any keyboards apks? i just need it so that i can sign onto my gmail account?
Click to expand...
Click to collapse
I thought your whole ICS was being unresponsive. Just do a wipe. Or get apks for a third party keyboard. Go keyboard is what I use. Just google "go keyboard apk download"
acidburn89 said:
I thought your whole ICS was being unresponsive. Just do a wipe. Or get apks for a third party keyboard. Go keyboard is what I use. Just google "go keyboard apk download"
Click to expand...
Click to collapse
Lol yeah go keyboard worked perfectly. I must say this keyboard is kinda awsome too lol gonnakeep this one!!!! This thanks mate
just do as the he said n everythin works like charm finally usin ics thx alot
acidburn89 said:
I thought your whole ICS was being unresponsive. Just do a wipe. Or get apks for a third party keyboard. Go keyboard is what I use. Just google "go keyboard apk download"
Click to expand...
Click to collapse
Lol yeah go keyboard worked perfectly. I must say this keyboard is kinda awsome too lol gonnakeep this one!!!! This thanks mate
i9000gt said:
Lol yeah go keyboard worked perfectly. I must say this keyboard is kinda awsome too lol gonnakeep this one!!!! This thanks mate
Click to expand...
Click to collapse
Yeah, it's a great keyboard. I have reduced the height of the keys by one unit in both portrait and landscape. I also have the emoji plugin, which is kinda cool. 0_o
Fail, I liked the new Gmail, but everything seemed so big, since I got used to 240 dpi, downloaded DPI Changer from Market, decreased DPI, and after that I couldn't boot
So I had to flash stock rom using Odin, and start over ...
Now I've just rooted stock rom, and waiting for battery to charge over 50%, since all these flashing and rooting sucked most of the juice out of it
Btw, the best keyboard in my opinion is "Thumb Keyboard"
So you're saying it's FULLY FUNCTIONAL? As in everything works just as well or close to the stock rom? Then no need for me to wait for the official release from Samsung?
If so, I'll do it baby.
I am amazed how smooth this rom is
So far its stable, we will see that in few days
WORK IN PROGRESS.. UNTIL NOW NOT GETTING 100%
This was for CM11s, Don't try on CM12s
As soon as we found right procedure we'll Update here
This tutorial is not for newbies.. If you are not little advance user don't do this
After reboot Values reset to Orignal setting (Reset)
need to prevent NV recovery
1. Download Files Here containing all the necessary files and extract it on desktop.
2. Enable Android Debugging on your phone and connect it to your computer,
3. Open up ADB and type the following:
Code:
adb shell
su
setprop sys.usb.config diag,adb
4. Launch Device Manager go to & expand Other Devices,
Right click Android (or something related) listed under that menu
Choose Update Driver Software,
Browse my computer for driver software,
Let me pick from a list of device drivers on my computer,
Just Click Next,
Have Disk,
Browse to where you extracted YU Diagnostics Driver folder
Inside you will find 32bit and 64bit versions, pick one as per your OS
Select htcdiag.inf (for 32bit) or HtcUsbMdmV64.inf (for 64bit) file that you will Open.
Accept all warning messages and let the installation of the driver complete.
5. Once everything is done installing, under Modems or Ports (Com & LPT) in Device Manager you will find HTC USB Modem.
Right click and select Properties; in this you will see Port: COM<number>. Remember that COM<number> or write it down.
6. Open QPST v2.7 Build 4.11 > run as administrator setup.exe (Don’t run QPST.2.7.411.msi)
7. Open QPST Configuration from Start Menu,
Go to the Ports tab,
Click on Add New Port (right bottom corner);
In the Port field type in the COM<number> you wrote down/remembered from step 5 and in Port Label type YU and finally click OK (left bottom corner).
If you've followed all the steps correctly until here, you should be able to see something like this in the Active Phones tab:
View attachment 3258366
Keep QPST Configuration window open
8. Open QXDM-3.12.714 > run as administrator setup.exe (Don’t run QXDMInstaller.msi)
9. Open QXDM Professional (run as administrator),
go to Options menu,
Select Communications
Set Target port to your phone COM<number> you wrote down/remembered from step 5 from dropdown list, Press OK.
View attachment 3258367
10. Back to QXDM main window, in the "View" drop-down menu, selects NV Browser
View attachment 3258368
now the fun part begins
View attachment 3259381
Put check mark on Dual SIM (as shown above SS) for apply all setting to both SIMs (Thanks to @tirta.agung)
11. Inside the NV Browser window,
Scroll down and click on line 01877 (rf_bc_config)
Click the Read button save original value in notepad in case something goes wrong.
Replace Input value with 3460734838925427584
Click on Write button.
12. Inside the NV Browser window,
Scroll down and click on line 00946 (band_pref_16_31);
Click the Read button, save original value in notepad in case something goes wrong.
Replace Input value with 0x0FF8 (please don't be an idiot and don't edit the empty one with "nam" in the name)
Click on Write button.
13. Inside the NV Browser window,
scroll down and click on line 02954 (band_pref_32_63);
click the Read button, save original value in notepad in case something goes wrong.
replace Input value with 805765120 (please don't be an idiot and don't edit the empty one with "nam" in the name)
click on Write button.
14. Inside the NV Browser window,
scroll down and click on line 00441 (band_pref);
click the Read button, save original value in notepad in case something goes wrong.
replace Input value with 0x380 or 0xFFFF (please don't be an idiot and don't edit the empty one with "nam" in the name)
click on Write button.
If you have problem with selection, you can edit it directly from your phone: *#*#4636#*#* /Phone information /Menu /Select radio band > Automatic
15. Inside the NV Browser window,
scroll down and click on line 06828 (lte_bc_config);
click the Read button, save original value in notepad in case something goes wrong.
replace Input value with 1904863 (please don't be an idiot and don't edit the empty one with "ext" in the name)
click on Write button.
16. Now Close QXDM; Wait 30 seconds,
disable Android Debugging on your phone,
unplug it and reboot your device;
Once it comes back on, it might take a minute or two for it to acquire signal so don't panic.
DO this on your own risk.. No body is responcible for any lost
Conclusion:
The only real way to know if the whole thing got applied is to do steps 1 through 10 again (obviously skipping installations)
and reading all values or if you are in an area where you previously had bad or no reception.
You can see unlocked GSM/UMPTS bands from the *#*#4636#*#* /Phone information /Menu /Select radio band
For more features of QXDM i.e. recover lost IMEI or ESN go HERE (Thanks to @tirta.agung)
Credits:
Thanks to @BlackSoulxxx for his original work with the Qualcomm baseband software, for the modified Drivers and for the LTE NV values
Thanks to @olokos for his original tutorial
Thanks to @devilsshadow for his original tutorial
Thanks to @Albirew for his original tutorial
Thanks to @tirta.agung for bringing the original thread to my attention & Guide me in many ways
Thanks to @fards for finding the diagnostics command that made all this possible
Thanks to @hem12 who raised my will for finding these tutorials.
Thanks to @d3athwarrior for post this tutorial.
Reserved
Don't forget to put check marks on dual sims, and apply all settings to sim0 and sim1 (see attachment). By the way before u messed things up, back up your modemst1, modemst2, fsc, and fsg.
By the way we can also use qxdm to recover lost imei, just go to 0550, and insert your imei for SIM 1 (sim0 in qxdm) and SIM 2 (sim1 in qxdm), for example:
Code:
If your IMEI was: 954091051099226, then the boxes would look like so:
8
9a
45
90
1
15
90
29
62
or also recover lost esn (item no 0 and 5597) or meid (1943 and 5598).
Great guide, guys !:good::good::good:
---------- Post added at 04:02 AM ---------- Previous post was at 03:59 AM ----------
Some error down there: "OPO" and huge load of credited people that seem dont fit in here. Clearly copied from OPO thread?
BlackSoulxxx said:
Great guide, guys !:good::good::good:
---------- Post added at 04:02 AM ---------- Previous post was at 03:59 AM ----------
Some error down there: "OPO" and huge load of credited people that seem dont fit in here. Clearly copied from OPO thread?
Click to expand...
Click to collapse
Yes you'r right.. I don't want to leave anyone in credit for them work :good:
OPO removed :Hawkeye:
but that works for me..
Need help for prevent NV recovery from you all
If it's the same as the 1+1, replacing /system/bin/rmt_storage with a version not locked would prevent nv recovery (do you know if NV values were sticking in an older version? If so, take it's rmt_storage and try to replace current one with older one, I think it's worth trying)
Albirew said:
If it's the same as the 1+1, replacing /system/bin/rmt_storage with a version not locked would prevent nv recovery (do you know if NV values were sticking in an older version? If so, take it's rmt_storage and try to replace current one with older one, I think it's worth trying)
Click to expand...
Click to collapse
Hmmm, as far as I know, all NV settings, including IMEI, or MEID, ESN, etc, resides in your modemst1 and modemst2 partition. If you don't believe me and eager to try, first make a backup of those two partitions, then format or wipe the two partition inside your phone (use fastboot to do this), I'll bet for your YU, now your IMEI and NV settings are all gone.
To be honest, I just found out from this thread that there is an rmt_storage in CM phones, wkwkwkwkw, . If the rmt_storage function is trough, then CM is locking the phone NV settings from the HLOS side not Non-HLOS side. I'll do some research on this rmt_storage.
Need Help from your side
tirta.agung said:
Don't forget to put check marks on dual sims, and apply all settings to sim0 and sim1 (see attachment). By the way before u messed things up, back up your modemst1, modemst2, fsc, and fsg.
.....
or also recover lost esn (item no 0 and 5597) or meid (1943 and 5598).
Click to expand...
Click to collapse
BlackSoulxxx said:
Great guide, guys !:good::good::good:
Some error down there: "OPO" and huge load of credited people that seem dont fit in here. Clearly copied from OPO thread?
Click to expand...
Click to collapse
Albirew said:
If it's the same as the
.....
current one with older one, I think it's worth trying)
Click to expand...
Click to collapse
Now current status is
when I connect mobile
it shows me like that
Even I change USB config to diag,adb
thru ADB or manually
this time its present in default.prop
I try both
trying to disable MTP in mobile USB connection is not working
Window for Settings > Storage > 3dot > USB computer connection is working
but when I disable MTP.. its not working3
So need help from your side..
how I enter / install diag mode
@tirta.agung
I read your complete Guide regarding unbrick YU
but as that post has multipal guides ... I little confused ..
Sorry I am Xtreme noob for all that
Can you guide me an easy way to connect with QPST for enable LTE band
Can I try
Guide #3. REVIVING YOUR IMEIs (That for 32bit or 64bit)??
for connect QXDM
ekhasti said:
@tirta.agung
I read your complete Guide regarding unbrick YU
but as that post has multipal guides ... I little confused ..
Sorry I am Xtreme noob for all that
Can you guide me an easy way to connect with QPST for enable LTE band
Can I try
Guide #3. REVIVING YOUR IMEIs (That for 32bit or 64bit)??
for connect QXDM
Click to expand...
Click to collapse
Yes use guide number three, and download the necessary file there. By the way, to use the guide you have to be in stock CM kitkat.
How to use these tools for Xperia C6602
Long story short, did it work in the end for more than 1 person?
thanks for the post. but i have a Lollipop rom. I will wait for you to update the thread ....
Can we try this in lollipop??? Is there any update on this???
ekhasti said:
WORK IN PROGRESS.. UNTIL NOW NOT GETTING 100%
CM12s
As soon as we found right procedure we'll Update here
Click to expand...
Click to collapse
Hi there, attached is boot.img and a hack rmt_storage for CM 12.1. Just flash the boot.img to your phone and connect it with QXDM. Your phone will be recognized as qualcomm diagnostic port 903A. Copy and paste (you can use TWRP's file manager to do this) the rmt_storage to "/system/bin" and change its permission (chmod) to 0755. This will make your changes stick upon reboot.
By the way, to use all these files, you need to be on stock CM 12.1. I haven't tried it on any other ROM.
Bro...im on cm12.1 ...rooted...I didn't understand the procedure... Pls can u explain step by step ..pls....wats that qxad ..? Is a software...? Wer I get that..,pls reply bro
Sent from my AO5510 using XDA Free mobile app
tirta.agung said:
Hi there, attached is boot.img and a hack rmt_storage for CM 12.1. Just flash the boot.img to your phone and connect it with QXDM. Your phone will be recognized as qualcomm diagnostic port 903A. Copy and paste (you can use TWRP's file manager to do this) the rmt_storage to "/system/bin" and change its permission (chmod) to 0755. This will make your changes stick upon reboot.
By the way, to use all these files, you need to be on stock CM 12.1. I haven't tried it on any other ROM.
Click to expand...
Click to collapse
Now i upgraded to cm13.....can these two files work for me....pls reply
Sent from my AO5510 using XDA Forums
@ekhasti
I have tried doing this on Yureka - CM11 XNPH05Q. Installed all the drivers & softwares successfully. When I startup the QPST config to add a new port,
1. I have to uncheck the "Show serial and USB/QC diag ports only" to make the HTCUSBModem port visible.
2. Although I am able to add the port successfully I am unable to see the phone number, it says "No Phone".
Since it is unable to get the phone details I am unable to proceed further. Nothing is visible/editable QXDM. either.
I have manually edited the build.prop file to make sure USB debugging is enabled but to no avail. Please check the attached files, what is it that I am missing?
P.S - I am able to get my IMEI number using *#06#
Any suggestion Guys???
bluebl0od said:
Any suggestion Guys???
Click to expand...
Click to collapse
Guys, I am eagerly waiting for your updates
I am making this tutorial as I have had multiple versions of the LG LTE Leon and have used many firmware versions. I have created a stable method that has the least issues as I have had trouble with the latest firmware (MS34510f) disabling my root privileges. I have created a MEGA account specifically for all of the files necessary to complete this operation and have your device run smoothly. So, please follow my instructions exactly as stated and you should not have any issues. THIS PROCESS WILL REMOVE ALL DATA NOT SYNCED, DO READ BELOW NOTES IT IS VERY BENEFICIAL
Important Notes:
+This process will wipe all data that is not synced, it is important to ensure that no newer LG process are still on the device. Some might argue to leave data, to that I say good luck keeping your root and tethering without the device becoming suspiciously unstable.
+ I am not GUARANTEEING this will work on every model, but I have had an extremely high success rate with all Leon versions.
+ In this tutorial the process in which I remove Kingroot and replace it with SuperSu is for system stability. I find that most root functions I use seem to not work properly. (Wifi Tether Router and many others). So, I do recommend doing so.
+After the new OS is installed a MetroPCS splash screen will appear even if you do have T-Mobile. DO NOT BE ALARMED this firmware will not limit any functionality you had before, it will even help with tethering functionality.
Tutorial:
Let's Begin.
1. Download the link posted to obtain required files for this tutorial
Link: https://mega.nz/#F!PM4CQRqb!92kgIOnD0ZBY-8HVbtTwGQ
2. Open up LGFlashTool2014.exe
Begin by copying settings posted below, then click "normal flash"
3. Next click the "START" button
4. At this time, I recommend you verify all sync settings are to your liking and that all personal info needed is backed up
a. You have the option to throw all of your personal documents/pictures onto your SD card and removing it appropriately
(Go to: Settings - Storage - [scroll down to] Unmount SD card)
b. Next, navigate to Settings -Backup & reset [leave options default; both checked off] - Factory data reset - reset phone
c. Once reset it will most likely reboot, wipe, and then back to a OS. Now, you will Power Off entirely (make sure it is not plugged in so it will not go to charging mode)
d. Here is where we will hold down the Volume Up button with the phone unplugged from your PC. Then you must plug the USB into your phone.
e. A black screen with white text should post onto your screen, here we will continue to step 6
note: If this screen does not appear please power off and retry step d.
6. Next, follow the posted settings. Make sure to click the "Clear phone Software update Registry" button Then click "OK"
7. A new screen will arrive, and should begin the firmware download process. At this time it will take a few minute to load and should reboot to a fresh OS.
8. With the new OS in place, you can either follow the setup tutorial now or skip through for a later setup.
note: you can now insert your SD card
9. In the tools folder of the folder you downloaded copy the "mrw" folder to the Main Storage folder of your phone
10. Now copy the Kingroot apk to your downloads folder located on the main storage.
11. Go to Settings - About Phone - Software Info
At this time click the build number box a few times until it says you are a developer
12. Hit back until you are at the Setting menu, click on Developer options and check off "Stay Awake" and "Enable OEM Unlock" as well as "USB Debugging"
13. You may now run Kingroot, if it does not install root the first time it should flawlessly install the next.
14. After root is obtained, please go to your home screen and click the "Google Search" widget. Press Update Google Services and let it run. After that has been updated search for terminal emulator and install.
note: If the Play Store is acting fishy and force closing while typing in the search bar do not fret it will be fixed after reboot in further instruction
as an allternative use the jackpal.androidterm-1.0.70-71-minAPI4.apk provided in the "tools" folder
15. Open terminal and in a new window type: Su
16. Allow root usage and at this time type: sh /storage/emulated/0/mrw/root.sh
17. It will run with a few failed messages do not worry it should open SuperSu momentarily
18. Once SuperSu opens up allow it to update binaries using the "NORMAL" option but DO NOT REBOOT YET
19. At this time either download TWRP Manager from the play store or alternatively use the com.jmz.soft.twrpmanager-7.5.1.3-82-minAPI11.apk provided in the tools folder
20. Install and open TWRP Manager. Once opened click on device name and scroll until you see "LG Leon LTE (c50)"
a. Click on Recovery Version to Install and select "twrp-2.8.7.0-c50.img"
b. next click "Install Recovery" and if prompted for verification of install path and for install version select "YES" & "NORMAL"
21. After the TWRP setup is complete it may prompt you to reboot, if not click the arrow in the top left of the TWRP Manager screen and scroll down to "Reboot" and select "Reboot device"
22. After Reboot click TWRP Manager and verify a SuperSu prompt comes up if it hasn't already before the boot
At this point the device should be running smoothly. From here I prefer to do the following steps.
My Personal Setup after new install:
+Personally I like to install use a Root Uninstaller (I use 3C Toolbox Pro) and Uninstall and Backup all MetroPCS BloatWare including the Metro Browser.
+I also access the Hidden Menu by using the Dialer and Dial "2776348*#*"
- I scroll down to ApnUnlock and click to "Unlock APN"
- Then I navigate to Settings -Tethering & networks - Mobile Networks (I check off roaming data) - Access point names
--I then select the top APN and edit APN Type to: default,supl,mms,dun
---I click save from the top right selection, then turn on and off airplane mode
+If you are and Xposed user download "xposed-v79-sdk22-arm.zip","xposed-uninstaller-20150831-arm.zip", and "XposedInstaller_3.0_alpha4.apk" from: http://forum.xda-developers.com/showthread.php?t=3034811
-install the Xposed Installer, then Go to TWRP Manager, use reboot to recovery and from there click install and navigate to the "xposed-v79-sdk22-arm.zip" and install and reboot, it will reboot with a installing screen before your home screen, takes 5 minutes.
+I also use this AMAZING app "Wifi Tether Router", it is the only tethering app I use that works consistently (if you have an unlimited data plan). I get 30mbps up and down, playing many multiplayer games off my PC and PS4 averaging ping as low as 30 ! Setting I use for our device are in a post I created here: http://forum.xda-developers.com/leon/help/unlimited-metropcs-t-mobile-tether-t3290180
---------------------------------------------------------------------------------------------------------------------------------------------------------------
Special Thanks to:
MrW0lf from www.W0lfdroid.com for the Kingroot to SuperSU scrip
Numerous users on the XDA forums I pieced all of this information with
Fabio Grasso for making the amazing Wifi Tether Router
Team Win for being creating an awesome utility that has saved me from numerous bricks creating a stable method
Xposed and the creators of awesome additions such as Lolistat, Lucky Patcher, Max Lock, and SNAPPREFS
Any feedback? Did I do Okay? Questions? Let me know!
Mega link down
The mega link isn't working. Please fix it.
I got bored so I made a HavocOS guide. Enjoy!
I am not responsible for any bad things happening to your device/angry parents because YOU messed your phone up. If it somehow broke after you did this, it's not my problem.
oh yea also I didnt make the OS. this is just a guide.
Downloads in video description.
I wanted to make this quick and simple so here's a video:
----------------------------------------------------------
Written guide:
-
Pt. 0: quick prerequisites that i forgor to write before
-
consider reading through the guide before you do it
make sure oem unlocking is enabled on your phone. if you dont know how to do that uhh here's how:
1. go to settings
2. scroll down to about
3. tap the build number until it asks for your screen lock
4. go to system
5. go to developer options
6. enable oem unlocking.
7. if its grayed out its because your phone is cringe, sorry.
-
Pt. 1: Downloads
-
Download all of these files
Google USB driver Extract with 7z or WinRar.
Platform Tools Click "Download for Windows" and extract with 7z or WinRar.
Stock Firmware Extract with 7z or WinRar.
TWRP/Kernel Don't extract this.
HavocOS Don't extract this.
-
Pt. 2: Drivers
-
How to install Android drivers:
1. Put your phone in fastboot mode (turn off your phone and turn it back on with power button and vol down.)
2. Open Device Manager on your PC.
3. Click on the dropdown for "Other Devices"
4. Find "Android"
5. Double click on "Android"
6. Click on "Update Driver"
7. Click on "Browse my computer for drivers"
8. Click on "Let me pick from a list of available drivers on my computer"
9. Double click on "Show all devices"
10. Click on "Have Disk"
11. Click on "Browse"
12. Find the usb_driver folder that you extracted earlier and in that folder, select android_winusb.inf and hit "Open"
13. Select "Android Bootloader Interface" and it "Next"
14. If there are any warnings, just press "Yes"
Drivers have been installed.
-
Pt. 3: Installing command line tools
-
How to install platform-tools systemwide.
1. Find your platform-tools folder and move it to somewhere where it can stay there forever, E.g. the root folder in your C drive (C:\). I don't recommend putting it on your desktop because that will add useless clutter.
2. Go to your start menu and look up "Environment Variables"
3. Click on "Environment Variables"
4. Scroll down on the bottom; "System Variables" section, find "Path", and double click on it
5. Click on "New"
6. Click on "Browse"
7. Navigate to your "platform-tools" folder
8. Click on platform-tools
9. Click "Ok."
10. Click "Ok."
11. Click "Ok."
12. Click "Ok."
(lol)
oh also i forgot to mention, unlock your bootloader now
steps to do that here:
1. open cmd
2. enter fastboot flashing unlock
3. hit yes on the prompt that appears on your phone
4. you might need to enter fastboot flashing unlock_critical (if cmd gives you an error saying it doesn't exist or something just kinda ignore it, i'm only putting it here just in case)
5. you should be good to continue
-
Pt. 4: The Installation.
-
Installing HavocOS
1. MAKE SURE THAT YOUR PHONE IS IN FASTBOOT MODE.
2. Open aura-p-release-3201
3. Run flash_all.bat (double click on it)
4. Wait until it finishes running.
5. As soon as it closes and your phone screen turns black, immediately hold the power and volume down buttons and enter fastboot mode.
6. Open Command Prompt (CMD)
7. Flash the Kernel by typing fastboot flash boot <boot.img> and replace <boot.img> with the file path to your boot.img file. (Tip: you can drag the file into CMD to put in the file path.)
8. Flash HavocOS by typing fastboot flash system <HavocOS PHH.img> and replace <HavocOS PHH.img> with the file path to the HavocOS PHH.img file. Ignore the errors.
9. Wait until everything finishes and unplug your phone (if you want to)
10. Use volume buttons to go down to "Recovery Mode"
11. Select "Recovery Mode" with your power button. (Tip: double tap the power button to get past the bootloader unlocked warning screen)
12. Swipe to allow modifications
13. Tap on wipe > format data > type "yes" > press "OK"
14. Press back until you get to the TWRP home screen
15. Tap "Reboot" > tap "Recovery" > then tap "Do not install"
16. Wait until it reboots back into recovery.
17. Follow steps 12-14, then hit "Reboot" > then hit "System"
If it doesn't boot into the setup screen, open fastboot mode and format the data once more, then reboot into system.
----------------------------------------------------------
and here are the easiest and also some of the dumbest GSI root instructions ever:
Download Magisk-v21.4.zip
1. Open TWRP and mount everything. (except for USB storage. micro sd card is optional.)
2. Put Magisk-v21.4.zip on your phone (in file explorer)
3. Open the TWRP file manager (advanced > file manager)
4. Navigate to /system/system/bin
5. Find resetprop and tap on it
6. Rename resetprop to phh-resetprop
7. tap on install
8. install Magisk-v21.4.zip
9. Boot up your phone, open magisk, and update everything.
10. Turn on MagiskHide in the settings of magisk manager.
11. Profit$ (lol)
SafetyNet should pass if you did it properly (I would find it kinda funny if you managed to mess up those easy instructions)
Alright guys, have a nice day!
p.s: I might begin work on a user-friendly auto-installer soon.
Thank you OP, finally got Android 11 fully working including SafetyNet, camera/flashlight, Bluetooth and SD card. The only tricky part was the Bluetooth - got help from this comment - needed to delete both APKs before first boot.
pigjr said:
Thank you OP, finally got Android 11 fully working including SafetyNet, camera/flashlight, Bluetooth and SD card. The only tricky part was the Bluetooth - got help from this comment - needed to delete both APKs before first boot.
Click to expand...
Click to collapse
yea i forgot to include that part. I thought you didn't need to do that before boot tho. I managed to get BT working by deleting BluetoothResCommon.apk and renaming RazerAuraBluetoothRes.apk to BluetoothResCommon.apk.
all the links for 4.1 are dead you got any bro?
Cylow333 said:
all the links for 4.1 are dead you got any bro?
Click to expand...
Click to collapse
There is a mirror in the description of the video.
Dude you are a different type of god thank you so much I can finally sleep now.
Quick question: is this version of Havoc have no issues with receiving SMS? Previous versions of it cause this annoying issue that after few minutes from restart SMS stop arriving to phone and the only fix at that time was just to restart it. Tried some patches from telegram but basically end up with no fix.
drumiec said:
Quick question: is this version of Havoc have no issues with receiving SMS? Previous versions of it cause this annoying issue that after few minutes from restart SMS stop arriving to phone and the only fix at that time was just to restart it. Tried some patches from telegram but basically end up with no fix.
Click to expand...
Click to collapse
not that i know of
Uhh is there anyway to edit the buildprop without getting a bootloop? I tried with buildprop editor and i vant see any of the info if i change something and when i restart it goes in a loop.
Cylow333 said:
Uhh is there anyway to edit the buildprop without getting a bootloop? I tried with buildprop editor and i vant see any of the info if i change something and when i restart it goes in a loop.
Click to expand...
Click to collapse
I have never tried editing the buildprop so I don't know, sorry.
Marcos8760 said:
yea i forgot to include that part. I thought you didn't need to do that before boot tho. I managed to get BT working by deleting BluetoothResCommon.apk and renaming RazerAuraBluetoothRes.apk to BluetoothResCommon.apk.
Click to expand...
Click to collapse
So do I have to reflash in order to fix Bluetooth?
Sadly my main reason for losing is that I'm running into a mako issue with HavocOS. systenUI keeps crashing whenever the on-screen keyboard is displayed. This happens with the default installed gBoard and SwiftKey beta. It also crashes when the screen goes to sleep. I followed all the steps from the video. Only thing I did besides that was restore a backup from Google Drive so I didn't have to manually install everything. I'm sadly out of ideas and might have to switch to normal GSI or back to LineageOS so the device is stable enough to use.
gumbyx84 said:
So do I have to reflash in order to fix Bluetooth?
Sadly my main reason for losing is that I'm running into a mako issue with HavocOS. systenUI keeps crashing whenever the on-screen keyboard is displayed. This happens with the default installed gBoard and SwiftKey beta. It also crashes when the screen goes to sleep. I followed all the steps from the video. Only thing I did besides that was restore a backup from Google Drive so I didn't have to manually install everything. I'm sadly out of ideas and might have to switch to normal GSI or back to LineageOS so the device is stable enough to use.
Click to expand...
Click to collapse
I have never had to fix BT before first boot.
And also, that's kinda weird. I've never had any systemUI crashes with the keyboard, although i have had a weird bug where the entire OS crashes and it reboots into a state where its impossible to use. however, to fix that, i just reflashed and i never encountered the bug again. your install might have been a lemon. maybe install again?
Marcos8760 said:
I have never had to fix BT before first boot.
And also, that's kinda weird. I've never had any systemUI crashes with the keyboard, although i have had a weird bug where the entire OS crashes and it reboots into a state where its impossible to use. however, to fix that, i just reflashed and i never encountered the bug again. your install might have been a lemon. maybe install again?
Click to expand...
Click to collapse
Do I need to flash back to stock or can I do a "dirty" reflash?
gumbyx84 said:
Do I need to flash back to stock or can I do a "dirty" reflash?
Click to expand...
Click to collapse
Eh. I think flashing back to stock might be better.
Marcos8760 said:
Eh. I think flashing back to stock might be better.
Click to expand...
Click to collapse
Trying out now. I'm at work so I don't have my laptop with me. Trying it work a live CD image lol
Update: It's been sitting on the "Powered by Android" screen for 20+ minutes. I already tried a data wipe from the bootloader. I can get into TWRP. I'm going to give it another 10 minutes then try flashing HavocOS again.
Update 2: I've made progress. Now it's stick on the HavocOS loading screen. It's been like that for 20+ minutes. Tried the bootloader data format.
Update 3: I was finally able to flash HavocOS at home without issue. I flashed Magisk before even booting into the OS and it seems to be working ok. After it rebooted to complete the setup/install, the issue came back. I'm just flashing HavocOS without Magisk for now.
Hello,
Thank you for the guide, i have installed the android 11 successfully, but i got a startup loup when i tried to restart the phone (in a normal way ), the havoc logo started up then the password, but it just louping between them..
Please help
Hello I did exactly what you said for magisk I updated everything but the problem is that I don't have access to superuser and nor to the module in magisk in my razer phone 2 with havocOS.
Do you have a solution to this problem thank you ?