Ok so i got my nook and the shop worked fine.... So i rooted it to see what it was like I used nooter i think... So i reset it with the power off then power on and hold down the two page buttons and reset it to factory.
Yeah and now my shop crashes....
Can anyone help?
OK now i just turned it off and back on and its still running the android rooted OS or what ever..... HOW THE HECK DO U UN ROOT?! Oh and i never figured out the flashing? <back up thingy so i didnt do it.... (bad idea?)
E #2 ok so i fixed it just follow this link and this guys instructions
Oh yeah and any help ask me ima noobish kid who knows what hes doing
Delete, please... My bad, I got sent to the final post in the thread and confused the Amazon Marketplace with the solution...
Any fix to Shop crashing under root pls?
I found I can do anything other than copying framework.jar...
My shop is crashing as well. A bit annoying, but I found that I can just buy books from my computer, they will still transfer to my sync to my nook automatically.
Is there any fix for it(while keeping root)..?
Related
I decided to go ahead with the TW firmware upgrade. Everything seemed to be going fine until I tried to install it and it told me there was an error and I needed to hook it up to Kies first. I had already been using Kies with it on my Macbook for a couple weeks now so I went ahead and plugged it in. Kies recognized it as usual and all the information came up.
So I went on and tried to install again and it said it needed to reboot.
It reboots and comes to the Samsung Galaxy Tab 10.1 screen like normal (right before it starts the galaxy animation). Next thing I know it comes to a screen that looks like the attached images! I immediately unplugged it from Kies and shut it down. Every time I start it back up it does the same thing. I honestly have NO idea what to do. I can't even return it as it's past the 14 day period and I (stupidly) didn't buy Staples' bogus $160 insurance.
I was not rooted before. This was a stock tab that I bought at staples. It had the firmware 4.24 when I bought it, I think.
Please, any help is appreciated. I tried doing firmware recovery in Kies but the pop up comes up in Korean and I have no idea what it says...
Edit: More info. I'm not the only one with this problem. Two other people have posted on AndroidPolice about this. http://www.androidpolice.com/2011/08/04/samsung-galaxy-tab-10-1-wifi-touchwiz-ux-update-is-now-live/
The software is definitely running underneath all that mess but it's literally impossible to see what is going or to touch anything.
I guess this thread is about the same issue
http://forum.xda-developers.com/showthread.php?t=1203610
Thanks, I'm checking the thread out now. I probably should have searched more than just Google before posting but I freaked out when it happened.
No need to freak out . we have xda and dev to solve all our problems
i have exactly the same problem as you... what should i do now?
I get the same screen but after rebooting! pfft it's making me really sad :\
I'm sorry but I tried reading this http://forum.xda-developers.com/showthread.php?t=1171089 and couldnt understanding what should I do!
What CWM + my device is not rooted, all I could understand is that the thread contains instructions on how to root your device..
I just want my normal screen back!
Please tell me what to do in simple english :\
And now I did a wipe and the stripes are gone, but the screen is black instead :\ still not working. Please help me!
Are you sure you didnt sit on it?
Amal Kadi said:
I'm sorry but I tried reading this http://forum.xda-developers.com/showthread.php?t=1171089 and couldnt understanding what should I do!
What CWM + my device is not rooted, all I could understand is that the thread contains instructions on how to root your device..
I just want my normal screen back!
Please tell me what to do in simple english :\
Click to expand...
Click to collapse
haha i had the same problem go look at my threat that was posted above. in thier someone posted instructions on what to do the link you posted contains the download to the things needed heres a basic rundown of what you need to do
install clockwork recovery mod "CWM" to replace your bootloader.
download and install stock 3.1 and you should have your tab back to normal.
my help thread has the instructions to instal CWM
tonyurquiza said:
haha i had the same problem go look at my threat that was posted above. in thier someone posted instructions on what to do the link you posted contains the download to the things needed heres a basic rundown of what you need to do
install clockwork recovery mod "CWM" to replace your bootloader.
download and install stock 3.1 and you should have your tab back to normal.
my help thread has the instructions to instal CWM
Click to expand...
Click to collapse
So I need to follow all the steps for rooting except the last one which is the actual rooting? Great thanx! Do I need to use Kies? My current computer is Mac but I guess I need to download those things to a Windows machine to make it work, right?
Thank you very much
I had the same problem. I upgraded the update on my non-rooted tablet and got the funked up video mess. Per instructions from Samsung support, I hard booted to the recovery menu (power+vol down, then power up, down on download screen) and did the factory wipe. After that I ended up with the black screen. I could tell things were working in the back but couldnt see a thing. I figured I would throw it on the Kies and it saw that there was a factory upgrade so I let the Kies run through it and it works fine now.
Dont know if this will help w/other but it worked for me.
tl;dr: Interrupted update. cant do jack. tried acer tech support. failed
I grew bored with waiting the two minutes for my tablet to install the new update. so i stood up and hit the power button to put it to sleep like a boss. then i cam back later, the lock screen was unresponsive
i figured out be double tapping the pwr button i was able to unlock the tablet to see the powering down screen (see attachment). I can get to the setting menu, but evrytime i try to mess around in it, the window closes itself.
an interesting note is that the time is wrong, and the battery suddenly went from 100% to 15%
I called acer tech support, and with ther guidance...
pressed the reset button to no effect
powered on holding the pwr & vol- buttons down to get an error (see attachment). then the tablet turns off.
Ive dled some "update.zip" files i found online that are supposedly used to unbrick the tab... but i just got the same error picture(see attachment)
one other thing i tried was to hold the power and vol+ buttons. this cleared a chache, but had no other effect.
I am a noob at droid, but not to tech. i would like to avoid perma bricking, and im unsure about mailing this in. waiting is gay. I would like to restore it to factory settings w/o rooting it etc. as ive never done that before. but im not opposed to installing a CFW if it somes to that...
Im looking for ideas guys here guys. wtf is wrong with this thing?
Haha
Lmao "hit the power button to put it to sleep like a boss", funny ****.
Can't help you though sorry
ive been around he web, and have seen this exact series of symptoms happen to a handful of other guys... i haven figured out a solution yet, and it is looking more and more like ill be sending it in via warranty
my best guess at this point is i have corrupted a crucial system file. as to why i can do jack in the factorys recovery mode... idk. but then again, idk what the factorys recovery mode should look like or how it would function. youtube only shows CWR... which i dont have
if i believed i could anything reasonably withing my abilities, i would... but voiding the warranty on a long shot seems dumb.
still ANY ideas would be great
I too faced exactly the same problem today.. Dunno why this is happening... I am too worried now... Kindly post the solution as you find them...
Am sure calling tech-support is just waste of time..
Thanks in advance..
IM GOLDEN...
Ive reflashed to the original factory build. the problem was with the "update.zip" files i have been using. i guess they were corrupt.
multiupload<dot>com/WCT2FYLMQC
this is the file i used. I tried several from other guides, etc... a guy on another board told me to use this one. i put it on the root of my SD card, then held the power and vol- buttons until the loader had started. it took awhile, and it looked like it froze during the process...
DONT TOUCH IT
just let it do its thing, and it will reboot itself and run through the setup process like when it was new.
npena said:
IM GOLDEN...
Ive reflashed to the original factory build. the problem was with the "update.zip" files i have been using. i guess they were corrupt.
multiupload<dot>com/WCT2FYLMQC
this is the file i used. I tried several from other guides, etc... a guy on another board told me to use this one. i put it on the root of my SD card, then held the power and vol- buttons until the loader had started. it took awhile, and it looked like it froze during the process...
DONT TOUCH IT
just let it do its thing, and it will reboot itself and run through the setup process like when it was new.
Click to expand...
Click to collapse
How to put this file on the root folder when am not able to switchon the Tablet itself... and how reliable is this file??
stuck on same screen also!
My friend and i who both purchased this Acer Iconia tab are both having the same problem. We both received a message on the tablets to do the update. We both got stuck and have gone thru tech line and there is no remedy. She was able to return hers within the 15 day period; I on the other hand am a week over that so have to mail it to Acer for repair. I'm thinking this is more than a cooincidence and there is a problem more spread... Acer would neither verify or confirm....
buntzmehta said:
How to put this file on the root folder when am not able to switchon the Tablet itself... and how reliable is this file??
Click to expand...
Click to collapse
He said the root of his SDCARD. You can take out the sdcard and put it in a sd cardreader on a computer and copy the file to it then put it back in the tablet. The file worked for him so it might be worth trying. Just have patience while it is loading as some of these updates take a while to load and sometimes you may not see anything happening but it is. The more patches and roms you load on Android the more you'll learn to just leave it alone and let the updates finish. Its pretty rare for updates to be messed up. Its usually people getting anxious and clicking on stuff.
Good luck
Sent from my A501 using Tapatalk
still stuck on shutdown screen any updates?
Anyone had any luck with a fix? If not --sending it to Acer for warranty repair after the hurricane hits..Sure hope this isn't a wide spreasd Acer issue do to the new download. Wish I could just return the thing all together. Worked well while I had it a whole 3 weeks...... Thanks in advance for any information.
npena said:
IM GOLDEN...
Ive reflashed to the original factory build. the problem was with the "update.zip" files i have been using. i guess they were corrupt.
multiupload<dot>com/WCT2FYLMQC
this is the file i used. I tried several from other guides, etc... a guy on another board told me to use this one. i put it on the root of my SD card, then held the power and vol- buttons until the loader had started. it took awhile, and it looked like it froze during the process...
DONT TOUCH IT
just let it do its thing, and it will reboot itself and run through the setup process like when it was new.
Click to expand...
Click to collapse
Thanks a lot dear npena.. you are simply great.. i was very anxious initially to try your method as no other member here who face the same problem thanked or recommended your suggestion...
I tried it and it worked... I am really very thankful to you...
Cheers..
you are my hero indeed.. thank once again..
BuntZ
Friends, who face this problem you must try it... it just takes few mins b4 you can get your acer tab to work again beautifully without loosing any settings or installed apps... they remain intact...
Yay!
Glad you got it running again - had a similar problem when doing a ota update myself, was so worried I bricked the tab, went thru about 7 update.zip files until I found one that magically worked, letting me get back into the system and flash the correct rom for my region
hi! i have the same problem with my a500. I write a guide to solve this problem. Problem in firmware. here is the gude http://forum.xda-developers.com/showthread.php?t=1572622
Help....i rooted my kindle was working great, started haveing prob with go launcher. I have TWRP on it & i thought kindle was backed up. Si went a tried to restore it but cant find any back up. All i can get it to do is boot up to TWRP. And i can find it on my computer. Iam not sure what went worng. Can any one point me in the right way on this.....
maybe tap "mount" and "mount sdcard" in twrp
flash with CM9
If you want kindle OS then m helpless..
But y don't you flash it with CM9!! its way better thn stock OS..
Liber ntsainst
Hi will that would be great i had it rooted befor till i had prob, i then tryed to go back but some how i didnt have a backup. Now the only thing i have on here now is TWRP and cant find anything. I have mad it as far as trying to get drivers back on but haveing prob with that. So right now iam lost as you now what.....
any help would be great....
delayed post
Some how i think my post are delayed a few hours i dont see anything foe a long time then theres one but time says hours early ......
hope you'r pressing F5 to refresh the browser ...
about drivers:
http://forum.xda-developers.com/showpost.php?p=22342376&postcount=6
maybe you have a simmilar issue as with miui:
http://forum.xda-developers.com/showpost.php?p=22433402&postcount=4
ahhhh yea i was (as soon as you say that ) i have did so many things trying to get things done all i have is TWRP on here i lost averthing. it now is comeing up under android phone but with a yellow mark by it. i would like to go with something other than kindle but not sure or how to do some things.
gave you a pm ...
i think i got it was it about kindles for $140 if it was i check on that and they said it was gone. still trying to work on this one.
i cant get it to find the kindle with out the yellow mark so i can see what else i can do with it
you need a working communication between the computer and the kf
without that you can't do anything
if you can't get rid of the windows drivers you can try firekit:
http://forum.xda-developers.com/showthread.php?t=1430038
it is a special crafted ubuntu on a usb stick
Hello, my DVP suddenly went bonkers and all i get is the DELL boot logo. I tried going into recovery to restore but pc wont detect. I cant do anything. i cant install anything using cab sender since cant detect and i cant unbrick due to same reason....anyone know how to fix this? Thank you in advance.
It sounds like the internal SD card crapped out. You could try my unbrick method but it sounds like it isnt being detected. Check in device manager to see if the USB device is being detected.
no detection at all. my friend told me he installed something on it using cab sender. Don't know what files were used but if need ill ask him. If only connection still worked i can restore stupid phone.
Anyone has any idea what to do? phone is just being paper weight now would like to use it again
dinhy34 said:
Hello, my DVP suddenly went bonkers and all i get is the DELL boot logo. I tried going into recovery to restore but pc wont detect. I cant do anything. i cant install anything using cab sender since cant detect and i cant unbrick due to same reason....anyone know how to fix this? Thank you in advance.
Click to expand...
Click to collapse
i had the same problem with other DVP, and i think that the processor is dead, because the snapdragon QSD8250 have this issue, i know but some month´s ago, i buyed two non working hd2, thinking that have problems of software and after research many days, i find this problem ,this proccesor dies for overheating , to solve this i buyed two hd2 with broken display and change the board, for this reason, buyed a broken dvp to do the same, ...sorry for the bad news,
Im pretty sure its not a cpu issue, i mentioned my friend force install something using cab sender and the issue happened because of that. Im trying to figure out how to recovery from this issue. thanks for help anyways
dinhy34 said:
Im pretty sure its not a cpu issue, i mentioned my friend force install something using cab sender and the issue happened because of that. Im trying to figure out how to recovery from this issue. thanks for help anyways
Click to expand...
Click to collapse
I agree with you. I have the same problem because of skipped upgrading of ROM, form 7004 to 7720. I have tried some steps on the device,
and find JTAG pins on board, now I'm seeking a riffbox to fix the problem, maybe Nosker can answer if this is feasible. I had followed his thread here:http://forum.xda-developers.com/showthread.php?t=1207805
Just for your reference...
seems very interesting. I hope you guys are able to proceed with what you guys are doing. I read the thread, so if i were to fix it i would need a riftbox? im very noobie in the stuff mentioned in the thread but if you guys are able to give a guide then i can follow it . best of luck to you guys!
did you guys ever got this resolved? i'm having the same problem.
ok... anyone tell me, what's happen, when we re-write sd card from another device?
my dell venue pro stock won't boot normally
MJCS said:
It sounds like the internal SD card crapped out. You could try my unbrick method but it sounds like it isnt being detected. Check in device manager to see if the USB device is being detected.
Click to expand...
Click to collapse
my DVP can't(won't) boot its stock on its logo dell, what can i do, but i try your step i can't download your driver. can you help me or there's another way to restore or to flash my DVP THANKSS
same issue
Any ideas anyone.
norvymariano said:
my DVP can't(won't) boot its stock on its logo dell, what can i do, but i try your step i can't download your driver. can you help me or there's another way to restore or to flash my DVP THANKSS
Click to expand...
Click to collapse
dell venue pro
Has anyone come up with a fix for this issue? my DVP will come on and the DELL logo will appear for a few seconds then the connect to pc screen
comes up and thats all it will do. when this first started happening I could take the battery out and put it back in like 50 times and it would finally start working and it would stay working until the battery went dead now I can't get it to boot at all. any info would be great thanks
Hi guys,
After a long search on XDA, unfortunately I couldn't find the answer to my problem, so need to start a new threat.
This is the case: phone is on 5.0 CM12, tried to install twrp on it via the twrp market-app. When needed to reboot phone went dead and wouldn't turn on anymore. Tried to reflash firmware but my phone won't boot into download mode. When trying to do that, my pc just opens 7 screens with removable disk E:, F:, K:, L; etc.
In computer manager it also won't show the LGE port, which I would need to use to repair my phone. I never had something this bad before. Does anyone please know what to do?
Thnx in advance very much!
this seems to be really similar to my and this guys problemhttp://forum.xda-developers.com/lg-g2/help/g2-super-brick-t2962236
you shoukd try he options in this thread. i didnt have the time to do it so far
GololCohan said:
this seems to be really similar to my and this guys problemhttp://forum.xda-developers.com/lg-g2/help/g2-super-brick-t2962236
you shoukd try he options in this thread. i didnt have the time to do it so far
Click to expand...
Click to collapse
Thnx mate.. only one noob question: how do I boot into Ubuntu?
I don't really know a lot about rooting either but I can tell you that you, well, have to have ubuntu installed as your OS.
anyways me and my brother tried it and it didn't really work, because the G2 was only connected to the laptop for a few seconds.
I just wrapped it up now and im going to send it back tomorrow. I hope I'm lucky... good luck with your brick
GololCohan said:
I don't really know a lot about rooting either but I can tell you that you, well, have to have ubuntu installed as your OS.
anyways me and my brother tried it and it didn't really work, because the G2 was only connected to the laptop for a few seconds.
I just wrapped it up now and im going to send it back tomorrow. I hope I'm lucky... good luck with your brick
Click to expand...
Click to collapse
Ok, well thnx anyway man