Related
I decided to go ahead with the TW firmware upgrade. Everything seemed to be going fine until I tried to install it and it told me there was an error and I needed to hook it up to Kies first. I had already been using Kies with it on my Macbook for a couple weeks now so I went ahead and plugged it in. Kies recognized it as usual and all the information came up.
So I went on and tried to install again and it said it needed to reboot.
It reboots and comes to the Samsung Galaxy Tab 10.1 screen like normal (right before it starts the galaxy animation). Next thing I know it comes to a screen that looks like the attached images! I immediately unplugged it from Kies and shut it down. Every time I start it back up it does the same thing. I honestly have NO idea what to do. I can't even return it as it's past the 14 day period and I (stupidly) didn't buy Staples' bogus $160 insurance.
I was not rooted before. This was a stock tab that I bought at staples. It had the firmware 4.24 when I bought it, I think.
Please, any help is appreciated. I tried doing firmware recovery in Kies but the pop up comes up in Korean and I have no idea what it says...
Edit: More info. I'm not the only one with this problem. Two other people have posted on AndroidPolice about this. http://www.androidpolice.com/2011/08/04/samsung-galaxy-tab-10-1-wifi-touchwiz-ux-update-is-now-live/
The software is definitely running underneath all that mess but it's literally impossible to see what is going or to touch anything.
I guess this thread is about the same issue
http://forum.xda-developers.com/showthread.php?t=1203610
Thanks, I'm checking the thread out now. I probably should have searched more than just Google before posting but I freaked out when it happened.
No need to freak out . we have xda and dev to solve all our problems
i have exactly the same problem as you... what should i do now?
I get the same screen but after rebooting! pfft it's making me really sad :\
I'm sorry but I tried reading this http://forum.xda-developers.com/showthread.php?t=1171089 and couldnt understanding what should I do!
What CWM + my device is not rooted, all I could understand is that the thread contains instructions on how to root your device..
I just want my normal screen back!
Please tell me what to do in simple english :\
And now I did a wipe and the stripes are gone, but the screen is black instead :\ still not working. Please help me!
Are you sure you didnt sit on it?
Amal Kadi said:
I'm sorry but I tried reading this http://forum.xda-developers.com/showthread.php?t=1171089 and couldnt understanding what should I do!
What CWM + my device is not rooted, all I could understand is that the thread contains instructions on how to root your device..
I just want my normal screen back!
Please tell me what to do in simple english :\
Click to expand...
Click to collapse
haha i had the same problem go look at my threat that was posted above. in thier someone posted instructions on what to do the link you posted contains the download to the things needed heres a basic rundown of what you need to do
install clockwork recovery mod "CWM" to replace your bootloader.
download and install stock 3.1 and you should have your tab back to normal.
my help thread has the instructions to instal CWM
tonyurquiza said:
haha i had the same problem go look at my threat that was posted above. in thier someone posted instructions on what to do the link you posted contains the download to the things needed heres a basic rundown of what you need to do
install clockwork recovery mod "CWM" to replace your bootloader.
download and install stock 3.1 and you should have your tab back to normal.
my help thread has the instructions to instal CWM
Click to expand...
Click to collapse
So I need to follow all the steps for rooting except the last one which is the actual rooting? Great thanx! Do I need to use Kies? My current computer is Mac but I guess I need to download those things to a Windows machine to make it work, right?
Thank you very much
I had the same problem. I upgraded the update on my non-rooted tablet and got the funked up video mess. Per instructions from Samsung support, I hard booted to the recovery menu (power+vol down, then power up, down on download screen) and did the factory wipe. After that I ended up with the black screen. I could tell things were working in the back but couldnt see a thing. I figured I would throw it on the Kies and it saw that there was a factory upgrade so I let the Kies run through it and it works fine now.
Dont know if this will help w/other but it worked for me.
My kindle is bricked and I have tried everything.
This is what i did: I rooted it, installed CM7, it worked fine. I then wanted to go back to the stock rom (due to countless FCs and freezing in CM) so i flashed the stock rom through TWRP. When i re-booted, the TWRP recovery screen no longer shows and it has the stock kindle fire logo on screen.
It does not show up in device manager in windows, I have re-installed the usb drivers multiple times. Any recovery methods using ADB simply result in "waiting for device" forever.
I have tried:
hard reset
fastboot commands
booting to linux live cd with firekit
kindle fire unbrick utility
None of these work because it does connect via usb
Anyone else have this problem>?
EDIT: Im fed up, ive tried every method on XDA and youtube, nothing works. I convinced amazon to replace it. Thanks anyways.
Hi Try This http://forum.xda-developers.com/showthread.php?t=1398728
lovejoy777 said:
Hi Try This http://forum.xda-developers.com/showthread.php?t=1398728
Click to expand...
Click to collapse
If you notice, that uses ADB shell. All of these commands result in "waiting for device" as it it not detected as a USB device
Sorry forgot to attach
Ok dont worry ive gotten my self into the same issue and lots of other ones lol
I just kept on trying different things.
it will be a driver issue Ill try to find the thread that got me out of it
---------- Post added at 11:11 PM ---------- Previous post was at 11:03 PM ----------
Found it Try this.http://forum.xda-developers.com/showthread.php?t=1399889
I bricked mine last night and kept getting stuck at "waiting for device" and figured out Windows ceases to recognize it as something it has a driver for.
Windows Device Manager showed the Kindle with a yellow sign next to it. I right clicked and updated the driver but rather than detecting it at all I manually picked a device.
Don't have Windows in front of me right now but it was something like "Android Phone" for the device type and then the device was the first one listed "ADB Interface" or something starting with ADB anyway.
Once that driver was loaded I could issue ADB commands again and got it fixed.
Sent from my Kindle Fire using Tapatalk
Please do the KF rooting community a favor when you get your new kindle and stay away from rooting it. You obviosuly cant take the time to fix your own problems and would rather give amazon another reason to hate root users.
googlelover said:
Please do the KF rooting community a favor when you get your new kindle and stay away from rooting it. You obviosuly cant take the time to fix your own problems and would rather give amazon another reason to hate root users.
Click to expand...
Click to collapse
not very nice - I had same problem - stuck at boot logo.
instead of telling someone where to go maybe a fix would be better.
bg4 said:
not very nice - I had same problem - stuck at boot logo.
instead of telling someone where to go maybe a fix would be better.
Click to expand...
Click to collapse
Well considering he already convinced amazon to send him a new one its a little too late, and others have already weighed in to help, its not very nice but its the truth. If he would have just waited more than an hour for people to try and help him he would probably have been able to fix it.
Jus a quick servh would give you the answers you're looking for. It's not bricked. So relax
HaroldBawls said:
Rooting it inst the issue, trying to put a phone OS on a tablet is the issue.
Click to expand...
Click to collapse
?
Tell that to all the Nook Color users running CM7 or to Samsung, HTC and others that shipped tablets with Android 2.2 and 2.3
googlelover said:
Please do the KF rooting community a favor when you get your new kindle and stay away from rooting it. You obviosuly cant take the time to fix your own problems and would rather give amazon another reason to hate root users.
Click to expand...
Click to collapse
Troll found. Anti-Hate taser activate.
Sent from my Kindle Fire using Tapatalk
Hey, quick question. I'm having similar issues and want to just call it a day.
When you convinced Amazon to replace it, did you tell them it was rooted/modified? Also, are they shipping you a new one just like that? Or do you have to send yours back first. Thanks! A response would be very much appreciated.
i had an issue last night and spent seven hours between dos and reading forums and couldn't find the answer, but at 630 this morning i got it and retested it today again by rebricking it and fixing it and it has to be the easiest thing that i've ever done.
unplug your kindle
turn your computer off
turn off your kindle with a hard reset
turn the computer back on and plug the kindle in
turn the kindle back on
in kindle utilities hit 1 and press enter
then hit 1 and press enter
it should go to reset your kindle and say it's done and to press any button to continue but don't press anything until your kindle is back on the splash menu
it worked for me when i couldn't find anything else to do and is way to simple to not try, so i hope it helps someone else
zbhest said:
Hey, quick question. I'm having similar issues and want to just call it a day.
When you convinced Amazon to replace it, did you tell them it was rooted/modified? Also, are they shipping you a new one just like that? Or do you have to send yours back first. Thanks! A response would be very much appreciated.
Click to expand...
Click to collapse
I was on skype with him. He said he was "playing angry birds, it restarted and is stuck at the 'kindle fire logo' " they didn't ask if it was rooted, no questions asked.
Sent from my Kindle Fire using Tapatalk
mattlgroff said:
I was on skype with him. He said he was "playing angry birds, it restarted and is stuck at the 'kindle fire logo' " they didn't ask if it was rooted, no questions asked.
Sent from my Kindle Fire using Tapatalk
Click to expand...
Click to collapse
This is exactly what happened. Because it didn't have the TWRP recovery screen or anything, any average tech support person wouldnt be able to tell it had been rooted. The failure actually happened after installing the stock rom so im pretty sure if they even take the time to inspect it, they wil see an unused, unrooted stock rom on the devoce
punkboyarde said:
i had an issue last night and spent seven hours between dos and reading forums and couldn't find the answer, but at 630 this morning i got it and retested it today again by rebricking it and fixing it and it has to be the easiest thing that i've ever done.
unplug your kindle
turn your computer off
turn off your kindle with a hard reset
turn the computer back on and plug the kindle in
turn the kindle back on
in kindle utilities hit 1 and press enter
then hit 1 and press enter
it should go to reset your kindle and say it's done and to press any button to continue but don't press anything until your kindle is back on the splash menu
it worked for me when i couldn't find anything else to do and is way to simple to not try, so i hope it helps someone else
Click to expand...
Click to collapse
Thanks, but this only works if it connects over usb. Doing this results in "waiting for device" as mentioned before
Okay... so the other day in class I was thumbing through the intrawebs and noticed the leaked ICS had came out for the A500... I tried flashing the ROM to my tablet, thinking it would be a cinch if I just followed the directions. No go, just stuck on Android boot logo. That's fine and all, made a back up with CWM (which i think was my initial problem with the ICS version.. correct if I'm wrong please,) but... my back-ups check sums were mismatching for everything. Couldn't get them to match and couldn't figure it out so I decided to just flash root stock version back on to the tablet and go from there using my titanium backup.
I flashed, and bam... vibrating black screen, no CWM recovery anymore no matter what I do. I've been using the SDK manager / ADB terminal thinger / EUUS Acer Iconia Tab Software Upgrade Utility. I cannot for the life of me find my CPUID, or at least the RIGHT CPUID. I understand to use software to find it but I don't think my tablet is giving the correct info, or something??!?! When I run adb devices in CMD in the platform-tools directory it doesn't list any devices available. If anyone could help it'd be greatly appreciated. Could possibly upload a screenshot of my usb devices with the USBdeview software?
GermanDoerksen said:
Okay... so the other day in class I was thumbing through the intrawebs and noticed the leaked ICS had came out for the A500... I tried flashing the ROM to my tablet, thinking it would be a cinch if I just followed the directions. No go, just stuck on Android boot logo. That's fine and all, made a back up with CWM (which i think was my initial problem with the ICS version.. correct if I'm wrong please,) but... my back-ups check sums were mismatching for everything. Couldn't get them to match and couldn't figure it out so I decided to just flash root stock version back on to the tablet and go from there using my titanium backup.
I flashed, and bam... vibrating black screen, no CWM recovery anymore no matter what I do. I've been using the SDK manager / ADB terminal thinger / EUUS Acer Iconia Tab Software Upgrade Utility. I cannot for the life of me find my CPUID, or at least the RIGHT CPUID. I understand to use software to find it but I don't think my tablet is giving the correct info, or something??!?! When I run adb devices in CMD in the platform-tools directory it doesn't list any devices available. If anyone could help it'd be greatly appreciated. Could possibly upload a screenshot of my usb devices with the USBdeview software?
Click to expand...
Click to collapse
To get your old uid number, look in one of your cwm backup folders on your SD card.should say uid.txt.
Then you can either use the photo tutorial at androidtabletgeeks.com, or there is text instructions here at xda.
Also, sounds like you may need to load the a DB drivers for your tab.
Help ME!!!!!!!!!!!!!
I've got a similar problem. My A500 are with the Boot "Verified Boot failed" and no way I can make it work again. He was with the ICS ROM'm trying to make it back to the Stock ROM but I can not. Please Help Me.
Hmm...
Moscow Desire said:
To get your old uid number, look in one of your cwm backup folders on your SD card.should say uid.txt.
Then you can either use the photo tutorial at androidtabletgeeks.com, or there is text instructions here at xda.
Also, sounds like you may need to load the a DB drivers for your tab.
Click to expand...
Click to collapse
Okay, that got me started in a good direction I feel like. The only problem is that CWM made them all "*.img" files. There is a "system.img", "boot.img", and "recovery.img". Which one should I be trying to tear into to get it? And I'm pretty sure I have the adb drivers installed, or at least my device shows up in my device manager when I put it in APX mode, and I've downloaded the USB recovery drivers from the ACER website, along with other drivers that people have suggested.
Thanks for your quick reply! Hopefully this gets me somewhere, if you have any more suggestions on where to find it within the filesystem / *.img files let me know.
** Also a "data.img"... didn't want to leave the right one out on accident haha.**
Still nothing...
I've been trying to go through the old CWM back up .img files, but the only one I can even open and extract is the system.img which from what I can tell, has nothing to do with the CPUID. Next I started up a virtual ubuntu to try ADB out on there, same results. Even changed the vendor ID to the one given to me by lsusb, still nothing. I'm out of thoughts on this... I'm burnt out on trying to get this to work.
When I opened up usbdeview, I saw an old version of my Acer Iconia tab when it was actually working. Used that serial number and it made it through to where it said it was upgrading, but then sat/hung overnight. didn't move or make any progress so I unplugged it so I could go to class and keep working on it... now that cpuid doesn't work either.
Is my tablet a fancy paperweight now?
A500 Reborn
People,
I managed to make my A500 back to work with an update file, but forum cannot permit to put the link here. Take out the spaces of the link below:
www . fileserve . com / file / 2HUVP9D / update(ok) . zip
Rename the file to "update.zip", then save this on Sdcard and Boot the A500 with Vol - pressed.
Worked for me.
so..
assanches said:
People,
I managed to make my A500 back to work with an update file, but forum cannot permit to put the link here. Take out the spaces of the link below:
www . fileserve . com / file / 2HUVP9D / update(ok) . zip
Rename the file to "update.zip", then save this on Sdcard and Boot the A500 with Vol - pressed.
Worked for me.
Click to expand...
Click to collapse
Did you have a recovery that you were able to boot into when you did this? Or does holding vol - while powering up install the update.zip? If you used a recovery manager it's not going to help me at all.
A500 Reborn
GermanDoerksen said:
Did you have a recovery that you were able to boot into when you did this? Or does holding vol - while powering up install the update.zip? If you used a recovery manager it's not going to help me at all.
Click to expand...
Click to collapse
I did this without a CWM recovery, only stock recovery (holding vol - while powering up).
assanches said:
I did this without a CWM recovery, only stock recovery (holding vol - while powering up).
Click to expand...
Click to collapse
Yeah... thanks but nothing doin for me. I have nothing but a black screen that vibrates. adb mode and such but nothing else. Something's gotta give eventually.
A500 Reborn
GermanDoerksen said:
Yeah... thanks but nothing doin for me. I have nothing but a black screen that vibrates. adb mode and such but nothing else. Something's gotta give eventually.
Click to expand...
Click to collapse
GermanDoerksen,
Did you try this?
http://forum.xda-developers.com/showpost.php?p=18750804&postcount=17
Worked for many users.
yup
assanches said:
GermanDoerksen,
Did you try this?
http://forum.xda-developers.com/showpost.php?p=18750804&postcount=17
Worked for many users.
Click to expand...
Click to collapse
That's where I started this journey to get it working again lol. The only problem I'm having is with finding my CPUID or the UID he talks about. The numbers I get don't work because they're for the recovery driver, not an actual UID for my tablet. There is no serial number displayed when connected.
GermanDoerksen said:
That's where I started this journey to get it working again lol. The only problem I'm having is with finding my CPUID or the UID he talks about. The numbers I get don't work because they're for the recovery driver, not an actual UID for my tablet. There is no serial number displayed when connected.
Click to expand...
Click to collapse
have you tried using usbdeview to find the cpuid?
look at the beginning of my post here: http://forum.xda-developers.com/showpost.php?p=22902126&postcount=258
wolverine423 said:
have you tried using usbdeview to find the cpuid?
look at the beginning of my post here: http://forum.xda-developers.com/showpost.php?p=22902126&postcount=258
Click to expand...
Click to collapse
Well I had... but I think you just helped me out. Will these show up if I'm using the recovery driver to get it to be recognized? I can find it when plugged in under Acer Iconia, but I think that's from a previous plug-in before I flashed it. Now when I plug it in it comes up under "acer picasso recovery driver". I never new what vendor ID to look for, so I'm going to do that.
Do I have to put serial number in the .txt file named cpuid to get it to work?
Thanks for replying and giving me something to do!
wolverine423 said:
have you tried using usbdeview to find the cpuid?
look at the beginning of my post here: http://forum.xda-developers.com/showpost.php?p=22902126&postcount=258
Click to expand...
Click to collapse
Okay, so I'm in my college class so I don't have my own laptop with me, I'm trying this on a "frozen" desktop. I said earlier my tablet show up in usbdeview as acer picasso recovery driver, but it flip flops between that and acer USB-Boot recovery driver. Don't know why. Either way, when I plug my tablet into my computer and put it in APX mode, it shows up, but no serial number or anything. I'm going to try what you said on my laptop at home where I've plugged it in before I flashed it, maybe I can find it then. Hopefully. Here's a USBdeView picture of what I'm seeing when I plug my tablet in.
woops
Sorry, picture was blurry...
GermanDoerksen said:
Sorry, picture was blurry...
Click to expand...
Click to collapse
Our computer labs all use deepfreeze.
Yeah, it should be listed on your laptop if it was plugged in while running honeycomb.
Best of luck.
wolverine423 said:
Our computer labs all use deepfreeze.
Yeah, it should be listed on your laptop if it was plugged in while running honeycomb.
Best of luck.
Click to expand...
Click to collapse
Hey so do ours. Gotta love the key combination to get past it
But that's awesome, this gives me hope! Will try this if I ever get out of this class... yay for linux classes that last from 8 to 3.
I have also bricked mine due to not reading things before jumping in as usual doh.
I installed the lightspeed ics beta 5 and it was pretty nice but a game I have been playing kept freezing so I decided to go back to 3.2 official by putting it on the sd card and booting recovery. It went through install etc but then just goes to a bootloop with the blue lightspeed flashing adroid. CWM is no more and like an idiot did not get my cpuid prior.
I tried installing the 3.0.1 unstable too but that did not work either. It just sits on flashing android now.
Will I have to wait until an official acer ics update.zip is available once released?
Thanks in advance
waj1234 said:
I have also bricked mine due to not reading things before jumping in as usual doh.
I installed the lightspeed ics beta 5 and it was pretty nice but a game I have been playing kept freezing so I decided to go back to 3.2 official by putting it on the sd card and booting recovery. It went through install etc but then just goes to a bootloop with the blue lightspeed flashing adroid. CWM is no more and like an idiot did not get my cpuid prior.
I tried installing the 3.0.1 unstable too but that did not work either. It just sits on flashing android now.
Will I have to wait until an official acer ics update.zip is available once released?
Thanks in advance
Click to expand...
Click to collapse
I don't think you'd HAVE to wait for the office ICS update. For you, I'd say do what I've been trying to do which is get it back to stock rom and recovery manager so I can wait for the official ICS update. Eventually, if I ever do unbrick this thing, then I will have to decide if I want to wait or not. Or dual-boot ubuntu
GermanDoerksen said:
I don't think you'd HAVE to wait for the office ICS update. For you, I'd say do what I've been trying to do which is get it back to stock rom and recovery manager so I can wait for the official ICS update. Eventually, if I ever do unbrick this thing, then I will have to decide if I want to wait or not. Or dual-boot ubuntu
Click to expand...
Click to collapse
I cant get my cpuid though as it dont show in usbdview either unless I need the drivers from sdk first.
*** SOLVED ***
Hey all.
So I've had my A500 for about a year now and it's been on several different ROMs and kernels over that time.
Most recently, I was running Flexreaper R12 (I believe) and ICS was running very smoothly.
At some point a few months ago (after a Flexreaper update), I was experiencing the Sleep Of Death and flashed an AntiSOD kernel to stop it (which it did). All this time, for some reason or another, I never updated the bootloader past the Honeycomb bootloader - and that's where I'm stuck right now.
I've tried using AfterOTA in every possible way to get anything else loaded.
I've tried Blackthund3r's A500 APX Flash Utility with at least 7 different APX packages, but no matter what I try, I'm still stuck with Flexreaper and the HC bootloader.
FWIW, both AfterOTA and the A500 APX Flash Util experience a problem with my A500 when it reboots. Most of the time I can get the device to be recognized by my OS (Windows 7 x64), but sometimes it doesn't and fails on driver install, even though I've installed the Google drivers direct from the SDK as well as Acer's drivers (USB_Acer_1.00.0524_A30H_A31H_A32H_A500_A501).
I'm pretty sure this is a driver issue, but I'm unclear on how to fix it. I've uninstalled ALL drivers related to the A500, rebooted and reinstalled them, I've uninstalled them and then pointed the installer directly to the unzipped USB driver folder (from above), but it seems that at some point the device fails to be seen, only rarely - but it's this that I think is the main problem... or I'm missing something.
So, any advice for someone that's STUCK on the old 3.01 bootloader?
Psychlone
Psychlone said:
Hey all.
So I've had my A500 for about a year now and it's been on several different ROMs and kernels over that time.
Most recently, I was running Flexreaper R12 (I believe) and ICS was running very smoothly.
At some point a few months ago (after a Flexreaper update), I was experiencing the Sleep Of Death and flashed an AntiSOD kernel to stop it (which it did). All this time, for some reason or another, I never updated the bootloader past the Honeycomb bootloader - and that's where I'm stuck right now.
I've tried using AfterOTA in every possible way to get anything else loaded.
I've tried Blackthund3r's A500 APX Flash Utility with at least 7 different APX packages, but no matter what I try, I'm still stuck with Flexreaper and the HC bootloader.
FWIW, both AfterOTA and the A500 APX Flash Util experience a problem with my A500 when it reboots. Most of the time I can get the device to be recognized by my OS (Windows 7 x64), but sometimes it doesn't and fails on driver install, even though I've installed the Google drivers direct from the SDK as well as Acer's drivers (USB_Acer_1.00.0524_A30H_A31H_A32H_A500_A501).
I'm pretty sure this is a driver issue, but I'm unclear on how to fix it. I've uninstalled ALL drivers related to the A500, rebooted and reinstalled them, I've uninstalled them and then pointed the installer directly to the unzipped USB driver folder (from above), but it seems that at some point the device fails to be seen, only rarely - but it's this that I think is the main problem... or I'm missing something.
So, any advice for someone that's STUCK on the old 3.01 bootloader?
Psychlone
Click to expand...
Click to collapse
i was stuck to so i downgraded got the ics bootloader from the ota and then used afterOTA to get the unlocked version and it worked
gears177 said:
i was stuck to so i downgraded got the ics bootloader from the ota and then used afterOTA to get the unlocked version and it worked
Click to expand...
Click to collapse
So how did you downgrade? I've done everything I can think of - at least 6 times over...
That was the plan after I figured that downgrading back to stock and then going up from there was the only way, but I can't even go back to Honeycomb 3.2 or even 3.1.
Check this out - I even made sure to make a CWM backup of my original setup before I upgraded to 3.2 back almost a year ago...but I can't get it to restore. In fact, I made several different backups and can't get ANY of them to restore.
So, in short, what did you do to go backwards?
Psychlone
EDIT: when I try to get into APX or Bootloader, it always ends up in Thor 1.7 and my computer doesn't recognize the device with a device driver install fail for MTP USB Device, even though I've installed the Acer Recovery drivers and the Google SDK drivers too... wtH?
Psychlone said:
So how did you downgrade? I've done everything I can think of - at least 6 times over...
That was the plan after I figured that downgrading back to stock and then going up from there was the only way, but I can't even go back to Honeycomb 3.2 or even 3.1.
Check this out - I even made sure to make a CWM backup of my original setup before I upgraded to 3.2 back almost a year ago...but I can't get it to restore. In fact, I made several different backups and can't get ANY of them to restore.
So, in short, what did you do to go backwards?
Psychlone
EDIT: when I try to get into APX or Bootloader, it always ends up in Thor 1.7 and my computer doesn't recognize the device with a device driver install fail for MTP USB Device, even though I've installed the Acer Recovery drivers and the Google SDK drivers too... wtH?
Click to expand...
Click to collapse
if your on the honeycomb bootloader simply flash a honeycomb rom and kernel no need to use afterOTA or anything else if i remember correctly
Psychlone said:
So how did you downgrade? I've done everything I can think of - at least 6 times over...
That was the plan after I figured that downgrading back to stock and then going up from there was the only way, but I can't even go back to Honeycomb 3.2 or even 3.1.
Check this out - I even made sure to make a CWM backup of my original setup before I upgraded to 3.2 back almost a year ago...but I can't get it to restore. In fact, I made several different backups and can't get ANY of them to restore.
So, in short, what did you do to go backwards?
Psychlone
EDIT: when I try to get into APX or Bootloader, it always ends up in Thor 1.7 and my computer doesn't recognize the device with a device driver install fail for MTP USB Device, even though I've installed the Acer Recovery drivers and the Google SDK drivers too... wtH?
Click to expand...
Click to collapse
you got a couple of choices....
with the HC Bootloader and ics rom...
full wipe and flash an HC rom or
nandroid restore an HC backup or
flash an update.zip
as a last resort - a complete downgrade/rollback use timmydeansv4 EUU - just be sure to follow the instructions in jazzyjames post on how to roll back - iu dont wanna get it wrong and end up stuck in apx mode. If it doesnt work first time....STOP...disconnect yr data cable and reboot tab and pc, use a different USB port and try it again....
Some folks have had issues with win64 so if you are able to then try on a different pc
sometimes a restore wont work unless you restore it with the recovery you used to back up with in the first place which may have been cwm 1.3.4 in your case....maybe???
as far as the MTP driver goes...that can be a pain...i had the same trouble a few days ago on ICS...took ages to get installed....and i still dont know why it did....or why it wouldnt....very frustrating!!!
dibb_nz said:
you got a couple of choices....
with the HC Bootloader and ics rom...
full wipe and flash an HC rom or
nandroid restore an HC backup or
flash an update.zip
as a last resort - a complete downgrade/rollback use timmydeansv4 EUU - just be sure to follow the instructions in jazzyjames post on how to roll back - iu dont wanna get it wrong and end up stuck in apx mode. If it doesnt work first time....STOP...disconnect yr data cable and reboot tab and pc, use a different USB port and try it again....
Some folks have had issues with win64 so if you are able to then try on a different pc
sometimes a restore wont work unless you restore it with the recovery you used to back up with in the first place which may have been cwm 1.3.4 in your case....maybe???
as far as the MTP driver goes...that can be a pain...i had the same trouble a few days ago on ICS...took ages to get installed....and i still dont know why it did....or why it wouldnt....very frustrating!!!
Click to expand...
Click to collapse
he's not on the ics bootloader though so couldn't he just flash the 3.01 unstable and get the OTA? or go back to a stock rom in general?
gears177 said:
he's not on the ics bootloader though so couldn't he just flash the 3.01 unstable and get the OTA? or go back to a stock rom in general?
Click to expand...
Click to collapse
Yeh 2nd line of my post hc bootloader ics rom, and u correct use 3.01 buggy update,zip or stock update.zip I shoulda been clearer - thanks gears
Thanks guys, I really do appreciate the help, but I'm still having serious issues reverting back to HC.
I feel like an idiot, but I have to say that even though it seems so, I'm actually the owner of a computer repair business, have 28 years experience in PC/Mac repair, and have rooted and modded every android device I've owned (including some for friends as well) - all the way back to the very beginning with the D1. This, however, has thrown me for a loop. NOTHING with this A500 has been this complicated! Everything up to this point has literally been stupid-proof and I've actually been quite impressed at just how easy modding is on the A500...
Anyway...
Here's what's going on and what I've tried today:
I've tried unsuccessfully several times to get ANYTHING working on my laptop, but to no avail. Same story as last night, no progress whatsoever - however, I did note that with CWM 134, I was able to restore an earlier version of ICS 4.03 (Flexreaper R10 I believe) - but it wasn't easy... I ended up restoring the main image and then using parts and pieces (using Advanced Restore) from other saves to finally even get it to boot.
This clearly wasn't getting me anywhere, so I moved the entire operation to another computer - my main rig (also a Win7 x64 - in fact, I don't own a computer that's not Win7 x64)
Now I've got USB driver issues! I can't even install the standard USB drivers from Acer's website because the installer errors out saying that there's no version of Acer Iconia 3G Driver Install is installed. wtF? That's what I'm TRYING to do!
I did get a different USB driver installed - the USB Driver_Acer_1.06.1500_A30H_A500, but nothing wants to use it and Blackthund3r's APX Flash Util won't see it, AfterOTA won't use it, and it's basically useless anyway. AND I can't install the Acer_1.00.0524_A30H_A31H_A32H_A500_A501 drivers no matter if I've got any others installed or not.
In my device mangler, there is no device with an exclamation, and in fact, sees my Acer Iconia A500 under USB Serial Bus Controllers as "Acer Picasso USB Boot-Recovery Driver", only when it's plugged in. NO other instance shows up at all.
I'm actually at the point of trying to follow through with the EUU (dibb_nz's "last resort"), but vache's website is down and I can't download anything for it. In fact, there's nothing from that guide that has a valid link...
(http://forum.xda-developers.com/showthread.php?t=1632392)
So now where do I go? I understand IT really well, so you don't need to talk to me like a complete noob, but dang if I can't figure this one out!
If I can get valid links to all the downloads from the link above, I'd be more than happy to give it a go and see if that works, but I can't piece together all those things from random places. If either of you (or anyone else for that matter) has valid links for everything needed to follow the EUU guide, I'd be very grateful!
Any other advice would certainly be appreciated as well! I don't have to use either of these computers, but as mentioned, ALL of my computers have Windows 7 x64 on them. I suppose I could try one of my customer's computers for all this, but that's not morally right and probably something that I would prefer not to explore.
I feel as if I could get the USB drivers installed properly on EITHER machine, that I'd likely be in good shape. I think that's what my problem actually is on the laptop as well, even though they're all installed and shows as installed until I boot into any recovery - then I get the MTP Device Driver Fail. There's likely other Acer driver issues there though, since Blackthund3r's utils don't follow through for anything... everything just hangs. AfterOTA just hangs.
Advice please?
And thanks again for your knowledge!
Psychlone
Yeh I hear u m8, its taken me all nite and day to revert back to HC and then upgrade again....dam pesky Picasso drivers.....
why not do as gears suggested....boot to cwm do all the wipes and formatsand flash an HC rom, ezterrys has a rooted one...no drivers needed . or am I missing something?
D/l link for timmydeans euu in my cpuid thread
dibb_nz said:
Yeh I hear u m8, its taken me all nite and day to revert back to HC and then upgrade again....dam pesky Picasso drivers.....
why not do as gears suggested....boot to cwm do all the wipes and formatsand flash an HC rom, ezterrys has a rooted one...no drivers needed . or am I missing something?
D/l link for timmydeans euu in my cpuid thread
Click to expand...
Click to collapse
Well, I would but no matter what image I put on my SD or even internal SD, and no matter what recovery I use, there's always some type of fail - usually an MD5 fail, or just a fail without any error code at all (little android on his back with the red exclamation, but no code)
I'm clearly missing SOMETHING.
I'm about to try the EUU right now unless there's some other advice...
EDIT::
OK, so I'm really in bad shape here - now the EUU (PBJ20upgrade) comes back with the error:
Please download the newer image for the upgrade.
Current image version: Acer_AV041_A500_1,054.Acer_AV041_A500
New image version: Acer_A500_1.016.05_Com_GEN1
What now????
Psychlone said:
Well, I would but no matter what image I put on my SD or even internal SD, and no matter what recovery I use, there's always some type of fail - usually an MD5 fail, or just a fail without any error code at all (little android on his back with the red exclamation, but no code)
I'm clearly missing SOMETHING.
I'm about to try the EUU right now unless there's some other advice...
Click to expand...
Click to collapse
oh hell now i'm confused, lol.....the little android dude is the acer stock recovery....i thought you had thors 1.7...oh well, nvm
Hopefully the EUU will install the right drivers for you....just be sure NOT to connect your data cable until u see the "cannot detect yr iconia tab" screen and it will give u instructions on how to get into apx mode...oh just before that window the EUU will try and scan your system image it will take a good 5 mins b4 it pops up the window to go into apx don't panic just let it do its thing....good luck m8!!!!
Oh and this will completely wipe yr system and user data.....
dibb_nz said:
oh hell now i'm confused, lol.....the little android dude is the acer stock recovery....i thought you had thors 1.7...oh well, nvm
Hopefully the EUU will install the right drivers for you....just be sure NOT to connect your data cable until u see the "cannot detect yr iconia tab" screen and it will give u instructions on how to get into apx mode...oh just before that window the EUU will try and scan your system image it will take a good 5 mins b4 it pops up the window to go into apx don't panic just let it do its thing....good luck m8!!!!
Oh and this will completely wipe yr system and user data.....
Click to expand...
Click to collapse
Some of the WEIRDEST stuff I've ever experienced - EVER.
Oh, the little dead android is when I'm using the stock recovery - I get different errors in TWRP and all the CWM Thor's that I've tried...(134, 71 and 712)
OK, so now PBJ20upgrade won't let me advance because apparently my CPUID isn't correct... it's the ICS version that's 13 characters long instead of 15, and my dmesg doesn't even contain the word "androidboot" at all (it does, however, contain a crapload of errors.)
What's going on?
OK, I'm an idiot. I really need help. I'm just glad that I'm 40 and don't lose my cool anymore, otherwise, I'd be freaking out about now.
Psychlone said:
Some of the WEIRDEST stuff I've ever experienced - EVER.
Oh, the little dead android is when I'm using the stock recovery - I get different errors in TWRP and all the CWM Thor's that I've tried...(134, 71 and 712)
OK, so now PBJ20upgrade won't let me advance because apparently my CPUID isn't correct... it's the ICS version that's 13 characters long instead of 15, and my dmesg doesn't even contain the word "androidboot" at all (it does, however, contain a crapload of errors.)
What's going on?
OK, I'm an idiot. I really need help. I'm just glad that I'm 40 and don't lose my cool anymore, otherwise, I'd be freaking out about now.
Click to expand...
Click to collapse
cpuid = 15/16 chars go to one of yr cwm nandroid backups theres a uid.txt file in the folder all the other methods rely on adb??? if not try usbdeview thats in the thread too
THANK YOU!
dibb_nz said:
cpuid = 15/16 chars go to one of yr cwm nandroid backups theres a uid.txt file in the folder all the other methods rely on adb??? if not try usbdeview thats in the thread too
Click to expand...
Click to collapse
Thanks so much dibb_nz... I've currently got PBJ20upgrade doing *something* (says it's going to take 10 minutes)
Thing is, I didn't get to this point by any conventional means - I followed the destructions several times over but ended up having a newer image than PBJ wanted, or the wrong CPUID.
I finally got this far by unplugging the tablet while PBJ was running, waiting for it's long error and instructions on how to get into APX (which I've clearly done at least a couple dozen times by now) and for some reason when I plugged it in, it shot forward.
We'll see how this goes - I'll keep you posted. I do VERY MUCH appreciate the help. I just might still need it, but hopefully not.
EDIT: Just rebooted and saw a "PASS" on the screen, followed by the "android" loading screen.
EDIT 2: It rebooted all the way in, I signed in (did the entire sign in process) and I'm BACK TO STOCK!!!!
Ok, so thank you THANK YOU THANK YOU for all the help - just being a sounding board is all I need sometimes.
Last questions to get me set up for the future:
What recovery should I create a restore with?
Then after creating a restore, should I use Blackthund3r's utility to flash an unlocked ICS bootloader, and if so, which package should I use to be able to test JB but still be able to go backwards to an ICS (preferably CM9)?
Anything else that I might need to know? (keep in mind that I've read on the order of 30 different threads pertaining to this adventure since it began a couple days ago, but I really appreciate the advice you've given and clearly you know what's up with the A500 - AND, it's hard to disseminate info from all the random threads everywhere. Speaking of which, why is it that there can't be a single thread with most everything that an A500 owner would need? Seriously!!)
Thanks again,
Psychlone
With what I went thru use Civs nvflash and rom and I'd stick with third cement until your safely patched and on ics.do all the wipes and follow instructions to the letter ...I'll check back in shortly
EDIT wtf "third cement" dang auto correct ... should read thors recovery
Wow - what a journey.
I'm now running CM10 and loving it.
I really can't believe the process that I went through over the last couple days - I've rooted and modded two dozen devices in the last year alone, and have been playing with root and modded ROMs since the very beginning, and nothing comes close to what I just did.
I actually have to blame not having everything I need in one place. Mis en place means to have everything you need before you even start - and that used to work back in the day, and still does to an extent for some devices, but anymore, the download links and information are found scattered across many different websites and forums and threads - so much so that it's apparent that this is a product of Google's lack of grip on their hardware and OS.
I do, however, see that you and a couple others have done a KILLER job of getting most everything together in one place to make it easier for those that are searching. I really appreciated your threads that I've read - the way you've written your guides is very intuitive and easy to follow, even if they didn't initially work for me.
Anyway, thanks again. I'm not going backwards now, but if I ever need to for some reason, at least I'm a bit familiar with the "worst-case scenario"!!
Take care man,
Psychlone
excellent news glad it worked for ya
Psychlone said:
Thanks so much dibb_nz... I've currently got PBJ20upgrade doing *something* (says it's going to take 10 minutes)
Thing is, I didn't get to this point by any conventional means - I followed the destructions several times over but ended up having a newer image than PBJ wanted, or the wrong CPUID.
Click to expand...
Click to collapse
if its referring to newer image then the data cable is connected!
and it will spit this error at you....
I finally got this far by unplugging the tablet while PBJ was running, waiting for it's long error and instructions on how to get into APX (which I've clearly done at least a couple dozen times by now) and for some reason when I plugged it in, it shot forward.
Click to expand...
Click to collapse
yup now you're cookin
We'll see how this goes - I'll keep you posted. I do VERY MUCH appreciate the help. I just might still need it, but hopefully not.
EDIT: Just rebooted and saw a "PASS" on the screen, followed by the "android" loading screen.
EDIT 2: It rebooted all the way in, I signed in (did the entire sign in process) and I'm BACK TO STOCK!!!!
Click to expand...
Click to collapse
oh yeahhhhh!!!!
Ok, so thank you THANK YOU THANK YOU for all the help - just being a sounding board is all I need sometimes.
Click to expand...
Click to collapse
nps glad to be of assistance -
Last questions to get me set up for the future:
What recovery should I create a restore with?
Then after creating a restore, should I use Blackthund3r's utility to flash an unlocked ICS bootloader, and if so, which package should I use to be able to test JB but still be able to go backwards to an ICS (preferably CM9)?
Anything else that I might need to know? (keep in mind that I've read on the order of 30 different threads pertaining to this adventure since it began a couple days ago, but I really appreciate the advice you've given and clearly you know what's up with the A500 - AND, it's hard to disseminate info from all the random threads everywhere. Speaking of which, why is it that there can't be a single thread with most everything that an A500 owner would need? Seriously!!)
Click to expand...
Click to collapse
becoz then you'd have thousands of posts to look thru and no-one would bother reading it all....i try to keep my cpuid thread updated with things 'unbricking' but its too hard to put 'everything' in one post unfortunately
---------- Post added at 07:01 PM ---------- Previous post was at 06:48 PM ----------
Psychlone said:
Wow - what a journey.
I'm now running CM10 and loving it.
I really can't believe the process that I went through over the last couple days - I've rooted and modded two dozen devices in the last year alone, and have been playing with root and modded ROMs since the very beginning, and nothing comes close to what I just did.
I actually have to blame not having everything I need in one place. Mis en place means to have everything you need before you even start - and that used to work back in the day, and still does to an extent for some devices, but anymore, the download links and information are found scattered across many different websites and forums and threads - so much so that it's apparent that this is a product of Google's lack of grip on their hardware and OS.
I do, however, see that you and a couple others have done a KILLER job of getting most everything together in one place to make it easier for those that are searching. I really appreciated your threads that I've read - the way you've written your guides is very intuitive and easy to follow, even if they didn't initially work for me.
Anyway, thanks again. I'm not going backwards now, but if I ever need to for some reason, at least I'm a bit familiar with the "worst-case scenario"!!
Take care man,
Psychlone
Click to expand...
Click to collapse
hell, i havent got round to cm10 yet!! i'm trying to get there but i have too much fun helpin peeps get to grips with flashing BL's...have to really thank the devs they did an awesome job unlocking ICS so everyone can enjoy the custom ICS/JB/CM roms- they've extended the life of our little iconia an extra half year or so if not longer.....imagine if we had to put up with stock 'anything' lol, i'd have traded it in long ago!!
was about to suggest the apxflash bundles as there are alot more options as far as recovery's go but you're all sussed now so thats fantastic....
can u add "SOLVED" to the title in case someone else is looking for help. thanks m8:good:
dibb_nz said:
excellent news glad it worked for ya
hell, i havent got round to cm10 yet!! i'm trying to get there but i have too much fun helpin peeps get to grips with flashing BL's...have to really thank the devs they did an awesome job unlocking ICS so everyone can enjoy the custom ICS/JB/CM roms- they've extended the life of our little iconia an extra half year or so if not longer.....imagine if we had to put up with stock 'anything' lol, i'd have traded it in long ago!!
was about to suggest the apxflash bundles as there are alot more options as far as recovery's go but you're all sussed now so thats fantastic....
can u add "SOLVED" to the title in case someone else is looking for help. thanks m8:good:
Click to expand...
Click to collapse
CM10 is SLICK. Think CM9 on graphics steroids and you're close!
I appreciate your position more than most. I get a lot of enjoyment out of helping others as well - I've written overclocking guides for AMD systems that was written years ago, revised a couple/three years ago and is still used to this day, even though I've long since moved over to Intel's "dark side". I also participate pretty deeply in helping others at a couple PC hardware forums pretty much daily, even though that's my actual job - I own 2 computer repair businesses in my hometown, and with well over 20,000 computers to fix, I'm ALWAYS busy but still always find time to help others in need.
As for adding ***SOLVED*** to the title, I'd love to...but it won't let me. Perhaps it's because I don't have a high enough post count, or because it's reserved for Mods, but I can't do it.
Thanks for everything once again - it's quite refreshing to be on the receiving end!
Psychlone
So, my neighbor bought an Acer A500 a few months back. He ended up not liking it so I bought it off of him. My tablet and I got really close and I fell in love. I started neglecting my girlfriend and all that. We had a beautiful relationship; my tablet and me. But, a couple days ago I was playing N.O.V.A 3 and it froze. I thought nothing of it and just powered it down. To my dismay, it froze at the Acer screen. I restarted it again and got the same thing. My life was over. My heart felt like it was ripped from my chest... I shed a manly tear.
I've tried vol- and power, vol+ and power, the reset button, D/Ling several different update.zip files and copying them to my SD. I've spent the last couple days reading and trying everything. All I get is the Droid guy with the blue thing swirling in his chest and then him laying on the ground with a red triangle and an exclamation point.
I'm told it's most likely not a hardware issue as things things are almost bullet-proof. But, I am pretty good at breaking things
Am I screwed or does someone have a miracle they can share. My gaming life depends on it.
-Dennis.
DennisPimps said:
So, my neighbor bought an Acer A500 a few months back. He ended up not liking it so I bought it off of him. My tablet and I got really close and I fell in love. I started neglecting my girlfriend and all that. We had a beautiful relationship; my tablet and me. But, a couple days ago I was playing N.O.V.A 3 and it froze. I thought nothing of it and just powered it down. To my dismay, it froze at the Acer screen. I restarted it again and got the same thing. My life was over. My heart felt like it was ripped from my chest... I shed a manly tear.
I've tried vol- and power, vol+ and power, the reset button, D/Ling several different update.zip files and copying them to my SD. I've spent the last couple days reading and trying everything. All I get is the Droid guy with the blue thing swirling in his chest and then him laying on the ground with a red triangle and an exclamation point.
I'm told it's most likely not a hardware issue as things things are almost bullet-proof. But, I am pretty good at breaking things
Am I screwed or does someone have a miracle they can share. My gaming life depends on it.
-Dennis.
Click to expand...
Click to collapse
Do you know what you were running on this thing? Was it stock Honeycomb, scock ICS, or was it running a custom ROM? (If so which one?)
Was it ever hooked up to your PC? (This would help with retrieving CPUID, if it was.) Do you know your CPUID? (Or SBK?)
You should at the least know the answers to these questions before you attempt any type of repair, as it is almost certainly salvageable, but you will almost certainly need your CPUID.
Danny2 said:
Do you know what you were running on this thing? Was it stock Honeycomb, scock ICS, or was it running a custom ROM? (If so which one?)
Was it ever hooked up to your PC? (This would help with retrieving CPUID, if it was.) Do you know your CPUID? (Or SBK?)
You should at the least know the answers to these questions before you attempt any type of repair, as it is almost certainly salvageable, but you will almost certainly need your CPUID.
Click to expand...
Click to collapse
I was running 4.0.1 ICS. I do have my cpuid and SBK. I tried flashing a new rom using blackthund3rs flash tool but it got to about 25% and stopped. I keep losing sync with my PCs, though.
DennisPimps said:
I was running 4.0.1 ICS. I do have my cpuid and SBK. I tried flashing a new rom using blackthund3rs flash tool but it got to about 25% and stopped. I keep losing sync with my PCs, though.
Click to expand...
Click to collapse
So, do you want to go back to stock, or to a custom ROM? If you wanna go stock, the easiest way would be load a 3.01 EUU, & upgrade on the play market to 4.03. That will prove it isn't a hardware issue. Alternatively, you could root, load a recovery, a bootloader, & flash a new ROM.
Danny2 said:
So, do you want to go back to stock, or to a custom ROM? If you wanna go stock, the easiest way would be load a 3.01 EUU, & upgrade on the play market to 4.03. That will prove it isn't a hardware issue. Alternatively, you could root, load a recovery, a bootloader, & flash a new ROM.
Click to expand...
Click to collapse
To be honest, I really don't care as long as I can getting it working again. But I would rather root it.
I think I can get it to work but neither one of my computers will recognize it. It shows up in APX and says something about recovery driver mode when I plug it into the laptop with Vista automatically downloads a driver and installs it again. I've tried turning off automatic driver install but that doesn't work for some reason. The one with XP Pro just shows up APX device but the APX Flash Tool by blackthund3r says it can't find it. I've downloaded the Acer Iconia 500 drivers and installed them but that doesn't work either. I'm at a loss.
Any tips would be great. I think I have a better chance using my laptop with XP, though. I also need to let you know that I truly do appreciate you trying to help. If you're ever in Columbus Ohio, let me know and I'll buy you a beer. lol
DennisPimps said:
To be honest, I really don't care as long as I can getting it working again. But I would rather root it.
I think I can get it to work but neither one of my computers will recognize it. It shows up in APX and says something about recovery driver mode when I plug it into the laptop with Vista automatically downloads a driver and installs it again. I've tried turning off automatic driver install but that doesn't work for some reason. The one with XP Pro just shows up APX device but the APX Flash Tool by blackthund3r says it can't find it. I've downloaded the Acer Iconia 500 drivers and installed them but that doesn't work either. I'm at a loss.
Any tips would be great. I think I have a better chance using my laptop with XP, though. I also need to let you know that I truly do appreciate you trying to help. If you're ever in Columbus Ohio, let me know and I'll buy you a beer. lol
Click to expand...
Click to collapse
Sorry,I thought I responded to this yesterday, but just now noticed I didn't.
Fire it up in APX mode, and install the 3.01 EUU from the development section, (Stock ROM listing) then simply follow the upgrade path to 4.03, then root. If you drivers are installed correctly, everything will work fine, if not, nothing will happen. If it does start to load the stock ROM, then fails with a write error after it attempts to write the bootsector, you may need to run Badsector, or babsector, depending where you look. Search the recent posts on this, you will find lots of stuff.
Danny2 said:
Sorry,I thought I responded to this yesterday, but just now noticed I didn't.
Fire it up in APX mode, and install the 3.01 EUU from the development section, (Stock ROM listing) then simply follow the upgrade path to 4.03, then root. If you drivers are installed correctly, everything will work fine, if not, nothing will happen. If it does start to load the stock ROM, then fails with a write error after it attempts to write the bootsector, you may need to run Badsector, or babsector, depending where you look. Search the recent posts on this, you will find lots of stuff.
Click to expand...
Click to collapse
How would I go about installing the EUU? I have nvflash and blackthund3r's flashing tools. But I can't seem to get my PC and tablet to connect. When I plug it into my PC without being in APX mode, it just says MTP Device. When I plug it in while in APX mode it does say something about Picasso Recovery Driver.
If you could explain things to me like I'm aN idiot, I'd really appreciate it.
Thanks,
Dennis
DennisPimps said:
How would I go about installing the EUU? I have nvflash and blackthund3r's flashing tools. But I can't seem to get my PC and tablet to connect. When I plug it into my PC without being in APX mode, it just says MTP Device. When I plug it in while in APX mode it does say something about Picasso Recovery Driver.
If you could explain things to me like I'm aN idiot, I'd really appreciate it.
Thanks,
Dennis
Click to expand...
Click to collapse
Sorry for late response, I watched for reply from yourself, but you didn't answer for 10 days, I lost track. Still need help?
Danny2 said:
Sorry for late response, I watched for reply from yourself, but you didn't answer for 10 days, I lost track. Still need help?
Click to expand...
Click to collapse
Yea, it's still bricked. I did finally get the flash tool to recognize it but it kept hanging up. I also tried Timmy Dean's EUU tool and that hangs up too. I did a little more research and found that I may have a faulty emmc. I ran babsector and got 'fatal error code 9 cannot format partition BCT.' I found a thread here that discusses how to write around the bad sectors using Linux. I'm going to give that a go... I've always wanted to learn Linux. Hey, I can't screw it up anymore than it already is, right? Again, thanks for your time and effort in trying to help.
Cheers,
Dennis
Hey, before you try that, try different USB cables and ports (if u haven't already)
I had a similar problem with my phone not maintaining stable USB link to PC... after 4 days I tried a diff USB cable and boom, snap, working.
Just a thought.....
Sent from my A500 using xda app-developers app
ericpeacock79 said:
Hey, before you try that, try different USB cables and ports (if u haven't already)
I had a similar problem with my phone not maintaining stable USB link to PC... after 4 days I tried a diff USB cable and boom, snap, working.
Just a thought.....
Sent from my A500 using xda app-developers app
Click to expand...
Click to collapse
I'll give that a go, m8.
Thanks!
-Dennis
DennisPimps said:
I'll give that a go, m8.
Thanks!
-Dennis
Click to expand...
Click to collapse
Just wondering if you ever figured out the errors you were getting during flashing? Currently having the same issues when using babsector.