I flashed Froyo v21, did wipe reset, cache reset and after logo Cyanogen is see black screen.
Can't do anything.
I had to flash back my old ROM.
Any ideas?
Related
I will try to cover any info you might need. I am using windows 7, my phone had 1.5 originally 1.47 hboot. I got the 2.1 official ota.
On monday, I rooted using the pb00img.zip, loaded amon-ra 1.6.2, did factory/data wipe, dalvik wipe, flashed kaos v20, boot looped, tried v.19 with full and dalvik wipe, same.
I have tried all version of kaos from 19-23, evileris 3, celb, cyanogenmod 6. All have the same boot loop, I have done the following:
Reloaded the pb file
Reloaded amon-ra
Have tried manually wiping data and dalvik using adb shell
I have formatted my sd card through windows
I have partitioned my card through amon-ra
Here is a pastebin of my bootup.
http://pastebin.com/SMhKDYZq
The phone starts up with the 3 skateboarding droids, sits there for a bit, screen goes black, i get a little vibrate, then the 3 skaters come back, rinse and repeat.
I have dont have apps2sd, or setcpu. Any help would be greatly appreciated,
cdjadex said:
I will try to cover any info you might need. I am using windows 7, my phone had 1.5 originally 1.47 hboot. I got the 2.1 official ota.
On monday, I rooted using the pb00img.zip, loaded amon-ra 1.6.2, did factory/data wipe, dalvik wipe, flashed kaos v20, boot looped, tried v.19 with full and dalvik wipe, same.
I have tried all version of kaos from 19-23, evileris 3, celb, cyanogenmod 6. All have the same boot loop, I have done the following:
Reloaded the pb file
Reloaded amon-ra
Have tried manually wiping data and dalvik using adb shell
I have formatted my sd card through windows
I have partitioned my card through amon-ra
Here is a pastebin of my bootup.
http://pastebin.com/SMhKDYZq
The phone starts up with the 3 skateboarding droids, sits there for a bit, screen goes black, i get a little vibrate, then the 3 skaters come back, rinse and repeat.
I have dont have apps2sd, or setcpu. Any help would be greatly appreciated,
Click to expand...
Click to collapse
Did you ever create a nand backup? If so, go back to it first and verify you don't have a hardware issue.
If you don't have a backup, search this forum for the Eris RUU and I'd go back to that and root using the newest method...basically start over from a working phone.
I do have a nand backup, I have been restoring when i leave work because my phone has to be working. It works fine with the OTA 2.1 that i had just rooted...
have you tried doing full data wipe/dalvik wipe after flashing a rom when i first installed roms i didn't wipe anything for 2 or 3 roms but they all seemed to flash over eachother. but then i couldn't flash anything and i thought somehow i broke something. but then i just did a full wipe after a flash and started up like it should have. took a while the first boot but ever since then i haven't run into any issues
Sjflowerhorn said:
have you tried doing full data wipe/dalvik wipe after flashing a rom when i first installed roms i didn't wipe anything for 2 or 3 roms but they all seemed to flash over eachother. but then i couldn't flash anything and i thought somehow i broke something. but then i just did a full wipe after a flash and started up like it should have. took a while the first boot but ever since then i haven't run into any issues
Click to expand...
Click to collapse
I had this same issue last night, though I kept repeating the Nexus-style boot screen (the "X" thing) over and over. I did a full data/dalvik wipe and everything came up just fine. I had this experience with two different CyanogenMod ports.
I rooted my phone yesterday with the help of the folks in the chat room.
Everything went smoothly. I had Clockwork 3.0.0.5. I tried to install Royal Liquid rom but it got stuck on the splash screen. Then I read about the problem with 3.0.0.5.
I have since download and attempted to install CM7, evil-4G-HD, Royal Glacier, and a few other roms but they all get stuck on splash screen. Before I install each rom, I wiped data, cache, and delvik, and formatted boot, system, and SD card.
I can get into recovery fine, but I keep getting stuck at splash screen. I have left the thing boot for 10 minutes and nothing.
Is it possible to install Clockwork 3.0.0.6 or higher (3.0.1.4) through Clockwork Recovery since I can't get into a rom and into Rom Manager.
Any suggestions?
Ok. Finally solved it at 4:41 am!!! Downloaded Royal Ginger, went through the motions, and finally got pasted the boot screen. Downloaded Rom Manager and updated Clockwork to 3.0.0.6. And now I'm in Royal Liquid!!! Can't wait to go flash crazy.
Download 3.0.0.6 from dev section and install via recovery. Then wipe data/cache, boot, system, and davlik and try again.
Sent from my HTC Glacier using XDA App
I rooted my phone and installed the cyan fox rom in December and it was working flawlessly, but yesterday it would randomly shut down and then get stuck in a boot loop or wouldn't boot up. So i installed a stock rom and there are no problems with that. Today I installed cyanogen mod on now the problem is coming up again. I have tried wiping dalvik cache, factory resting and that doesn't seem to do much.
Razorbrick said:
I rooted my phone and installed the cyan fox rom in December and it was working flawlessly, but yesterday it would randomly shut down and then get stuck in a boot loop or wouldn't boot up. So i installed a stock rom and there are no problems with that. Today I installed cyanogen mod on now the problem is coming up again. I have tried wiping dalvik cache, factory resting and that doesn't seem to do much.
Click to expand...
Click to collapse
Install Stock Rom again or ask in Cyanogenmod community
Recovery
What recovery are you using? Is it the latest version?
I recently attempted to flash from triforce 5.3 to 5.4 and it wasn't working. It would just sit at the splash screen for hours. I then used Odin to get back to stock. When I try flashing the triforce 5.4 rom I get stuck at the splash screen with the yellow and red text at the top. Am I missing something?
try this
try completely wiping cache and system before installing zip. sometimes residual stuff left over gets in the way. i use Philz recovery now and there is an option for wiping cache and wiping system for new rom..... i do both twice then install ZIP.
cyberweasal
goodfellaz2k3 said:
I recently attempted to flash from triforce 5.3 to 5.4 and it wasn't working. It would just sit at the splash screen for hours. I then used Odin to get back to stock. When I try flashing the triforce 5.4 rom I get stuck at the splash screen with the yellow and red text at the top. Am I missing something?
Click to expand...
Click to collapse
I gave that a try earlier and same results. I'm on the latest mk2 Firmware
Odin whatever stock ROM you are able (MF9 if you don't have a Knox bootloader, MK2 if you do). Reboot. Turn off phone and boot into Stock Recovery. Wipe Data/Factory Reset. Reboot. Odin in your favorite recovery (I like Philz). Turn off phone. Boot into Custom Recovery and flash your ROM of choice.
Sent from my SPH-L720 using Tapatalk
Hello
I just tried to installed custom ROMS (one is the CyanogenMod 12, and the other is PAC-ROM)
What I did is, backup the stock ROM with Philz recovery and wipe my data (factory reset, cache, and dalvik).
Then I successfully installed the Custom ROM with the recovery, and reboot my phone.
What happened is, when the SAMSUNG logo appeared, at the top of the screen, appeared a red colored text 'kernel is not seandroid enforcing'
and then, my phone stuck in a black screen. (no any messages, just a black screen).
I'm Using the stock firmware: G530HDCU1AOF1_G530HOLB1AOF1_G530HXCU1AOD1_HOME.tar
(https://samsung-firmware.org/downlo...al-Sim)/7f11/XID/G530HDCU1AOF1/G530HOLB1AOF1/)
Any one can help with my prob? Thank You
motionfrog said:
Hello
I just tried to installed custom ROMS (one is the CyanogenMod 12, and the other is PAC-ROM)
What I did is, backup the stock ROM with Philz recovery and wipe my data (factory reset, cache, and dalvik).
Then I successfully installed the Custom ROM with the recovery, and reboot my phone.
What happened is, when the SAMSUNG logo appeared, at the top of the screen, appeared a red colored text 'kernel is not seandroid enforcing'
and then, my phone stuck in a black screen. (no any messages, just a black screen).
I'm Using the stock firmware: G530HDCU1AOF1_G530HOLB1AOF1_G530HXCU1AOD1_HOME.tar
(https://samsung-firmware.org/downlo...al-Sim)/7f11/XID/G530HDCU1AOF1/G530HOLB1AOF1/)
Any one can help with my prob? Thank You
Click to expand...
Click to collapse
That's because you're using the Kitkat firmware nd trying to install a lollipop ROM. Upgrade your Firmware to Lollipop nd then install these ROM.