Got my vega - Vega General

Finally got my vega today should i install modded stock before in instal cyanogen or should i just install cyanogen can someone point me in correct direction to tutorials please
Sent from my Desire HD using XDA App

Go with the moddedstock as that has clockwork pre built and from there you can flash cyanogen or vegacomb etc using the clockwork recovery.
But first make sure you have the drivers sorted.
For a guide to flashing the moddedstock and driver installation see myadventvega.co.uk. For using clockwork then search xda and you will find multiple threads and replies explaining the steps.

Im cool with clockwrk etc as my hd is rooted. Iv downloaded modded stock and installed drivers from site is there a tut on flashing modded stock?
Sent from my Desire HD using XDA App

Related

[Q] Help!

I just rooted my friends Fascinate using SuperOneClick and then I installed Rom Manager and flashed clockwork mod but when i go into recovery it says it installation of update.zip failed. Where can I get the update.zip for it. I am trying to flash the dl-30 leaked rom thats out I have it. just cant get the update.zip so he can properly use clockwork mod.
You need to first flash CWM via Odin, before you can use the update.zip. Also, DL30 is an OLD and buggy froyo leak, EB01 is the most recent one, and the ones most of the new roms are being based on.
Thanks I did that. Note when I go into clockwork and try to use nandroid to make a back up I get an error that says its un able to mount his sd
Sent from my DROIDX using XDA App
You might be using an old Clockworkmod. Use this one here.
Edit: I updated the link with the one I use.
Do I just odin this on the fascinate?
Sent from my DROIDX using XDA App
onveiledwings said:
Do I just odin this on the fascinate?
Sent from my DROIDX using XDA App
Click to expand...
Click to collapse
Yes you just flash it and you will have CWM red
Thanks. This helped alot

CWM trouble

I got my Vega today and have been fiddling with it all evening. I'm bow at a stage where I want to try a custom rom.
All the roms require cwm to be installed or the rom installed via a PC.
How are most people getting cwm onto their device? I'm running s modded galaxy s so roms and cwm don't scare me
Many thanks in advance.
Mg
Sent from my GT-I9000 using XDA Premium App
with adb
good post at modoco
http://android.modaco.com/content/advent-vega-vega-modaco-com/324601/24-jan-2-5-1-8-clockworkmod-for-the-advent-vega/
MarkyG82 said:
I got my Vega today and have been fiddling with it all evening. I'm bow at a stage where I want to try a custom rom.
All the roms require cwm to be installed or the rom installed via a PC.
How are most people getting cwm onto their device? I'm running s modded galaxy s so roms and cwm don't scare me
Many thanks in advance.
Mg
Sent from my GT-I9000 using XDA Premium App
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=927464 follow his instructions couldnt be easier
Thanks alot. Will try the Higgsy rom.

Rooting apk for galaxy 2.3.4

Looking for an apk that will do this for me as z4root and gingerbreak won't work.
If you want root, why don't you flash a custom kernel, then boot into recovery and you will find an option for root built in, most will even install superuser for you too, with one click.
Tried using rom manager, 1 click speedmod but cant unless the phone is rooted
Sent from my GT-I9000 using XDA App
You need to look at the threads in Dev section for the likes of speedmod or Galaxian Kernels, you download the kernal and Odin, connect the phone in download mode and then flash the kernal as PDA (i think), then reboot your phone, reboot again into recovery and you will have CWM built in with root options, no need for rom manager...
Just make sure you pick the right Kernel for your current rom!!!
Yes but the point is i want to know if its possible via an apk . I know how to flash
Sent from my GT-I9000 using XDA App
Since 2.2.1 it's been impossible to root the SGS without outside tools.
What are you hoping to accomplish?
I dont know maybe a portable root unroot apk for gingerbread, I can do it by pc but it would be good to do it via apk
Sent from my E15i using XDA App
seriously man. you are dumb. ukdtweak already give the clear answer for you.
Download this pacakage http://www.4shared.com/folder/sMLqbTXo/_online.html and istall via Odin.
Best
I think he know to root via install custom kernel, but he want to find another root menthod using app on the phone, doesn't need PC to flash custom kernel
this is the apk:
http://forum.xda-developers.com/showthread.php?t=1044765
so it DOES exist. seems some i9000 users were able to make use of the apk successfully, while most were not. and this is with 2.3.3. i suppose the chances of it working on 2.3.4 are even more unlikely.
Thank,you very much guys i would thanks you all but cant from the xda app
Sent from my GT-I9000 using XDA App
think best will be root with odin...
Does SuperOneClick work with 2.3.4?...
Sent from my Milestone using XDA Premium App
Gingerbread
I know of no apk.
Unfortunately the first root has to be done via Odin. All other rooted roms can be done via clockwork mod. Rom manager screws up when using it from desktop. 2 roms come into my thoughts: Cognition and Insanity. I downloaded a 3.3.4 rom, in the past and flashed via Odin and totally bricked my other phone. You can use Samfirmware.com for the latest secure rom and then find a rooted rom , of the same number and flash via Odiin.
Adrian
Download
Sent from my GT-I9100 using XDA Premium App
Super 1 click must have a kernel which is unlocked to root the rom.
Adrian
Sent from my GT-I9100 using XDA Premium App

How to flash custom roms. All methods

Hi friends. I have a gen2 Dell xcd35 400mb ram froyo stock rooted with z4root modded for blade. I tried flashing cwm recovery latest 5.0.2.0 using rom manager, but whenever i booted in recovery using rom manager i got the stock recovery which stinks. So , i need your help in flashing any nice custom rom preferably cyanogenmod. So, how do i do it using windows or another method? And plz provide me the links for the drivers i need and yeah the stock recovery interface and the screenshot are vertically inverted:banghead:
Thanks in advance
Sent from my XCD35 using Tapatalk
I had same problem and here is solution.
You have to flash the cwm with zte blade customised app. Here is link for the flasher
http://android.modaco.com/topic/327215-recovery-clockworkmod-recovery-for-zte-blade-oledtft/
for some reason rom manager won't flash cwm.
I hope this helps
Sent from my Blade using XDA App
Thanks a lot mate. But, I flashed latest cm7 and the recovery just after posting the problem here using an app called recovery manager for our phone and yeah I love this phone more than ever I am sure you are providing me the same soln (without checking it). Thanks again :thumbup:
Sent from my Blade using Tapatalk

Need help on installing cm9

Hi i'm new to xda. Sorry if this posted at the wrong section. If so, can anyone tell how to move it to the correct section
Anyways back on topic. BTW my phone is the gt-p1000n(latin version), android 2.3.3 stock. I tried installing CM9 by following a guide from cyanogenmod's guide to flashing cm9 for the galaxy tab (sorry unable to post link) . Everything went smoothly until it rebooted after flashing the kernel with cwm, it got stuck at the boot screen. I decided to hold the power button until it turned off. So i tried going to CWM and it worked but i seem to be unable to install the CM9 zip. It said something about status 7 error when installing it .
Can anyone be willing to tell me what i did wrong with the procedures. Thanks for your help btw. And sorry for my bad English, it isn't my native language.
Iman176 said:
Hi i'm new to xda. Sorry if this posted at the wrong section. If so, can anyone tell how to move it to the correct section
Anyways back on topic. BTW my phone is the gt-p1000n(latin version), android 2.3.3 stock. I tried installing CM9 by following a guide from cyanogenmod's guide to flashing cm9 for the galaxy tab (sorry unable to post link) . Everything went smoothly until it rebooted after flashing the kernel with cwm, it got stuck at the boot screen. I decided to hold the power button until it turned off. So i tried going to CWM and it worked but i seem to be unable to install the CM9 zip. It said something about status 7 error when installing it .
Can anyone be willing to tell me what i did wrong with the procedures. Thanks for your help btw. And sorry for my bad English, it isn't my native language.
Click to expand...
Click to collapse
reflash stock kernel (overcome)
then flash cm9.zip
Sent from my GT-P1000 using xda app-developers app
asvantypography said:
reflash stock kernel (overcome)
then flash cm9.zip
Sent from my GT-P1000 using xda app-developers app
Click to expand...
Click to collapse
Tried it but it didn't work . Still got the error status 7
You need to install overcome rom as well.
I know it is incompatible because the touch screen driver is different,
But only need that so that cm9 installer thinks you are P1000.
So flash
- overcome kernel
- overcome rom
- cm9 for p1n
- gapps
You can skip installing overcome rom by editing the updater script too and remove the assert line at the top and zip it back.
Only if you know what you are doing.
Sent from my GT-P1000 using xda app-developers app
Maybe you must update the ClockWorkMod Recovery to 5.5.x.x version.
To Anyone if you can't find the Overcome kernel.
I've uploaded the Overcome kernel for you
Good luck from Thailand
priyana said:
You need to install overcome rom as well.
I know it is incompatible because the touch screen driver is different,
But only need that so that cm9 installer thinks you are P1000.
So flash
- overcome kernel
- overcome rom
- cm9 for p1n
- gapps
You can skip installing overcome rom by editing the updater script too and remove the assert line at the top and zip it back.
Only if you know what you are doing.
Sent from my GT-P1000 using xda app-developers app
Click to expand...
Click to collapse
Tried that and still got the status 7 error . I also went to overcome website and it said not to use the overcome kernel for gt-p1000n
Just edit the updater script then
Sent from my GT-I9300 using xda app-developers app
Maybe u used the worng cm9? Are u sure u are using cm9 for p1?
Sent from my GT-P1000 using xda app-developers app
He wanted p1n actually
Sent from my GT-P1000 using xda app-developers app
Removed the lines and now i'm getting status 6 error
What error is status 6 exactly
Seeing so many problems, I think you should restock.
Do you have stock rom?
If not, I still believe you can use overcome method.
Don't worry about the touch driver not compatible. You will be mostly on Odin and on recovery.
You just want to use the gb stock safe to restock with pit selected and repartition.
Then quickly flash overcome kernel and then boot to recovery and flash cm9.
Sent from my GT-P1000 using xda app-developers app
[/COLOR]
priyana said:
What error is status 6 exactly
Seeing so many problems, I think you should restock.
Do you have stock rom?
If not, I still believe you can use overcome method.
Don't worry about the touch driver not compatible. You will be mostly on Odin and on recovery.
You just want to use the gb stock safe to restock with pit selected and repartition.
Then quickly flash overcome kernel and then boot to recovery and flash cm9.
Sent from my GT-P1000 using xda app-developers app
Click to expand...
Click to collapse
Try with humberos kernel..if overcome kernel dont do the trick..
Sent from my GT-P1000 using xda premium
Just to be sure, the cm9 download link for the gt-p1000n is at 'get.cm/?device=p1n' right?
yes that is for P1000N
Not sure why, but for some odd reason Odin can't detect my tab when it's on download mode
No device added in the message box or no model number. If no model number it is normal.
Sent from my GT-P1000 using xda app-developers app
Odin didn't want to recognize mine either, but if you plug the tab, and close and open Odin, it should detect the com port.
I had a similar problem in the end i installed a rom i downloaded from Humberos's website, jus google Humberos and its the first link, there are the download links at like his 4th post. Good luck
Sent from my GT-I9100 using xda app-developers app
Iman176 said:
Not sure why, but for some odd reason Odin can't detect my tab when it's on download mode
Click to expand...
Click to collapse
Its because of what you did to the USB driver to use Heimdall, read the readme on Heimdall Folder, there is the way to revert the change...
Nekraweas said:
Its because of what you did to the USB driver to use Heimdall, read the reade on Heimdall Folder, there is the way to revert the change...
Click to expand...
Click to collapse
Yeah I used zadig.exe to install the drivers so I could use Heimdall. How do yo revert it back to normal?

Categories

Resources