Flashing a gingerbread ROM - Vibrant General

Hi, I've had my vibrant for quite a while it's been rooted ever since day 1. However I just got got Clockwork Mod working on stock 2.2 KA6. I'm now ready to flash a 2.3or 2.3.4 ROM and I wanted to know how do I go about it. I not sure if I can just flash over the stock 2.2 or not. I also hope I wouldn't have to resort to ODIN, as every one of my last several experiences with it was not good at all. Someone please help me out!

Someone please help I just want instructions how I can upgrade from stock KA6 to a 2.3 or 2.3.4 ROM. I would like to be able to do this without ODIN.

Hey bud, I'm kinda new on this board and not a super geek, but I might be able to point you in the right direction.
First of all, there's not an official Gingerbread release, so if you want it, you'll want to jump over the Development board (just go up a level) and find a ROM that is in 2.3. I know that Cyanogen is, for example, and there are a couple more.
What I did was to use Clockwork to do a backup (called a nandroid backup) and then I downloaded Cyanogen and used Clockwork to flash it. Quite simple and it sounds like you're all set up and ready to go.
Be advised that on (I think all) the 2.3 builds, you will have to give up on GPS. I had Cyanogen briefly just so I could check out streaming Netflix, but I had a few glitchy things like Swype to fix and decided just to go back to my Bionix ROM.
Hope that helps! Use the Thanks button if it did.

You can now get GPS with GB roms. You can even get wifi calling. Follow the instructions for the rom you want. CM7 is very easy to install.
Sent from my SGH-T959 using XDA Premium App

Its very simple. Since you have CWM (clockwork mod) now installed its easy peasy.
What you want to do is find a rom... personallt im using the nightly builds of CM7... You can find it by going to the android development section of our phone...
Find the rom then download the .zip file and place it somewhere on your internal sd card. Dont put it on your external sd.
Then go ahead and reboot into cwm and clear ur data/cache. After that go ahead and install zip, choose zip file from its location, then install.
Once installed, reboot and viola!
Most of all read the installation insrructions listed as well so you dont screw up. Worst comes to worst and your not sure then stop what your doing and ask here!!
Good luck my friend
Sent from my SGH-T959 using XDA Premium App

Sweet! Really? Last time I put Cyanogen on my GPS was a no go. That was less than 2 weeks ago, but I will look into it again.
Peace

Related

Root now or wait for froyo?

Hey guys I just got my vibrant back and I was wondering if I should root it, or just wait for froyo to release?
Sent from my vibrant while I'm working. I love my job
Joshochoa187 said:
Hey guys I just got my vibrant back and I was wondering if I should root it, or just wait for froyo to release?
Sent from my vibrant while I'm working. I love my job
Click to expand...
Click to collapse
Rooting isn't hard at all. You should go ahead & root now
+1 on the root now. While your at it install a custom rom and you will love your phone. Odds are you can get the Froyo update right here before it hits OTA anyways.
Yeah I've rooted my vibrant before I had to get a new one. It is easy but I would probably have to un root it to update right?
Sent from my vibrant while I'm working. I love my job
I don't understand what waiting would do. What you should NOT do is get the Froyo update from T-Mobile, as there is a chance that they will push an update that breaks your ability to root with 2.2 and you will have to wait even longer.
I recommended you root now, install Rom Manager, go to this thread:
http://forum.xda-developers.com/showthread.php?t=813001
Download Fusion 1.1 to your SDCARD (I have a folder called ROMS) and go to Clockwork, reboot into Recovery, Reinstall Packages, Install ZIP from SDCARD, choose Bionix 1.1, wait, and then see what that phone is really capable of.
Using Fusion 1.1 makes me not mind waiting for Froyo.
Yeah you are right it's just I haven't got to comfortable w/ flashing roms just yet. Looks a bit hard I guess I will just keep watching the videos on it till I feel like I can do it
Sent from my vibrant while I'm working. I love my job
Flashing roms is super easy as long as you're using ones flashable through rom manager. I must warn you it's very addictive. The only thing I would say is make your you backup in case something goes wrong and avoid Voodoo until you've flashed a few times and feel more comfortable. Great thing is there is tons of support here. I suggest you try Bionix Final.
Well guys I'm pretty convinced I think im going to do it I'm going to look into it thanx alot for your input
Sent from my vibrant while I'm working. I love my job
I should still be able to root even tho I did the recent ota right?
Sent from my vibrant while I'm working. I love my job
Joshochoa187 said:
I should still be able to root even tho I did the recent ota right?
Sent from my vibrant while I'm working. I love my job
Click to expand...
Click to collapse
Yes you can.
Joshochoa187 said:
Well guys I'm pretty convinced I think im going to do it I'm going to look into it thanx alot for your input
Sent from my vibrant while I'm working. I love my job
Click to expand...
Click to collapse
Dooo eeet!
Yes, it's daunting at first to flash a new ROM, but I just did it for the first time a few weeks ago and it was simple and easy. Just read up as much as you can and then write up a "roadmap" on all the steps you need to take, before, during, and after. It removed a lot of headaches for me because I planned it all out and had all the software ready in case anything went wrong (Odin, stock ROM, etc.). If there are any gaps in your understanding or questions about a process, ask them here before you flash!
I would root it and load a custom ROM, waiting for official OTA update to Froyo is like playing a Russian roulette now. Look what a simple update that was suppsoed to address GPS and other issues did to your fellow TMO users.
As always, there will be people who wouldn't even know that you can root the device to make it your own, so they will always run stock, and complain to TMO when they click MobiTV app and never use it, but have to cough up 10 bucks a month for it (it is just an example).
If you came here you know that you can do something to your phone besides waiting for Froyo, take a full advantage of what is offered in the dev section, and don't forget to support the developers if you like the work they do
Ok I'm reading the thread you posted how do I preform nandroid back up?
Sent from my vibrant while I'm working. I love my job
Joshochoa187 said:
Hey guys I just got my vibrant back and I was wondering if I should root it, or just wait for froyo to release?
Click to expand...
Click to collapse
If you are going to root, you might as well just do it.
Froyo could easily be 2-3 months down the road yet.
you need ROM manager...
it took me forever to find a how-to on this exact thing.
You have to be rooted in order to accomplish this:
1. root (obviously)
2. download ROM manager
3. open ROM manager and click on 'Flash ClockworkMod Recovery' and pick your phone.
4. click 'Backup Current ROM'
5. Let it do it's thing... it's going to reboot and run in recovery then reboot again.
6. You are done!!
To recover, you have to boot into clockwork recovery and click restore then pick the date file you made to recover to that date!
** If any of this is wrong, please call me out!!
Yeah, I started doing all this before I even discovered ROM Manager and ClockworkMod Recovery. Those tools definitely make everything so much easier.
Make sure you have the following software tools:
ADB
Odin
Rom Manager (w/ ClockworkMod Recovery installed)
Titanium Backup
Also, make sure your phone is not hardware locked before you begin. Try the standard procedure to enter Recovery Mode; if your phone is hardware locked, run the flashable fix (found in the dev forum) so that you have some way of recovering from a soft brick.
From my experiences, rooting has always been the fastest way to get updates. Those rollouts take forever.
Just rooted and installed fusion 1.1 it's great thanx for the tips guys
Sent from my SGH-T959 using XDA App
Joshochoa187 said:
Just rooted and installed fusion 1.1 it's great thanx for the tips guys
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
Way to go!
Sent from my bionix powered Vibrant
lol. i was waiting for a froyo release, i flashed my g1 a bunch so flashing wasn't a big deal, but i was happy with the phone stock for a bit and didn't mind waiting. but i rooted after a week. was flashing smaller things like ji2 gps, getting rid of bloatware, changing bootup/shutdown, etc. a couple weeks later. and a couple weeks after that i started flashing roms.
moral of the story? just root and start flashing now, it's a long wait.

Just got Samsung Vibrant!! How do I update to 2.2 Stock? Help please.

Hello.
I just got this phone, and it is UNLOCKED and stock 2.1 on it.
I would like to update to the official 2.2 and keep the unlocked, can someone point me to the right direction and tell me how that will be done?
I heard the 2.2 is not out officially, but it is leaked, so that leaked version is the full 2.2 stock or something missing?
I heard something about rooting, flashing, but I am not sure what that means as I just got this phone.
Any help appreciated.
Thanks.
http://forum.xda-developers.com/showthread.php?t=800636
root the phone 1st then download rom manager then pick a rom eugene's , sombionix, or master are all good read up on them and then pick one
down load it on to your computer then load into the internal sd card then reboot in to recovery or through clockwork (rom manager) and load it up.. If you can't follow read up on the sticky's in this forum it explains way better.........
Look in here for all your needs and tools that you'll want to get started on getting Root, ClockworkMod Recovery and a Custom Rom.
http://forum.xda-developers.com/showthread.php?t=771111
Look in here for all the different Roms. (ie Android 2.1 roms or Android 2.2 roms)
http://forum.xda-developers.com/forumdisplay.php?f=711
Just like oka1 said, you need to root your device first. Then get rom manager from the market and install clockworkmod recovery through it. When your done with that download any rom you want and put it on your Internal Memory (Phone Storage) on the root of it. Then flash through Clockworkmod. Hope its enough. ;D
Words are sounding very complicated, but I am sure its not just need to learn how to do the steps....
Also the 2.2 will fix GPS, and have Full Flash browser right?
Can I use this to root? http://forum.xda-developers.com/showthread.php?t=739300
Also if I brick this phone as I am new at it, can it be recovered?
And where do I find the stock 2.2, please?
Thanks.
Look in the development forum or use search. It's all there, and trivial to find.
My signature should teach you everything you need.
for the rom, go to the development section... There is a sticky called the bible. It has everything.
I personally would flash nero v3 (not the beta 3). Most on here agree it's amazing.
Also, Vibrant's are REALLY hard to brick... Worst case you can use odin to get back to stock 2.1. Thid is also covered in my signature.
Now, with all that said... Samsung promised froyo by year end. You may want to wait a few days (I'd still take nero over an ota, just giving you all the information. They may not deliver)
awaisuk said:
Words are sounding very complicated, but I am sure its not just need to learn how to do the steps....
Also the 2.2 will fix GPS, and have Full Flash browser right?
Can I use this to root? http://forum.xda-developers.com/showthread.php?t=739300
Also if I brick this phone as I am new at it, can it be recovered?
And where do I find the stock 2.2, please?
Thanks.
Click to expand...
Click to collapse
I would just leave it factory cause I see this ending in a soft brick and you freaking otu thinking you ruined your phone when you didnt
Learn how to use Odin FIRST, then learn how to root, then learn how to flash, all of this is covered somewhere in this forum.....search a little and you'll be flashing in no time.
Sent from THE Vibrant......
The newest and greatest is Nero 3 by team whiskey, its a custom 2.2, but with a gingerbread (2.3) feel and look. They have been at it for a a while and this is a wonderful rom. Check out my thread in this (vibrant general) forum for links and all the tips you need just ask.
I'd love to help.
Canada just got the official 2.2 Froyo update. Can't you just use that download?
Thank you for your replies, I am reading the guides now and hopefully everything works out.
Can someone please tell me does 2.2 have full flash browser?

[Q] How to install Android 2.3?

Hello, i just bought myTouch 4g and i'm a noob, could someone explain me how to install the Android 2.3 from zero?? I want the Nexus s version. Please!!!
ringox said:
Hello, i just bought myTouch 4g and i'm a noob, could someone explain me how to install the Android 2.3 from zero?? I want the Nexus s version. Please!!!
Click to expand...
Click to collapse
1) root the device and turn s=off. Threads in the development section
2) visit the Cyanogen mod CM7 thread
[sent via Cyanogen powered Android]
Root your phone via one of the many available methods although the gfree has seemed to have some issues. I'd recommend visionary method. Once you have root and have S-off install Rom manager via the market and flash clockwork (and correct me if I'm wrong as I get confused a lot with recoveries build #'s lol) mod recovery version 2.5.1.2, 3.0.0.5 or 3.0.0.6. 3.0.0.6 is the best available currently. After flashing clockwork in Rom manager (its the first thing that pops up) scroll to download Rom and download cyanogen mod 7 rc4 from that menu. (You will have finished downloading the rom and have booted into recovery by now) MAKE A NANDROID BACKUP BEFORE PRECEDING. Then Wipe data and cache via recovery and then go to install zip via SD card then choose it again find the .zip file for cm7 and hit install. It WILL take awhile to install. After it finishes reboot. Again this will take awhile. Once it comes up, wait 3 minutes or so then reboot. Then set up and your good to go. Once you've done that its basically rinse repeat for other roms. But remember to read the roms flashing instructions before hand as it may have some wacky process for flashing. Good luck!
Sent from my HTC Glaciee using XDA Premium App
Not to nitpick, but 3.0.2.4 is the latest version. It just came out the other day, so that's probably why you're not aware.
EDIT: To the OP, like neidlinger said, your first step is to root. This is the guide I followed and it works great: http://forum.xda-developers.com/showthread.php?t=858021.
TeeJay3800 said:
Not to nitpick, but 3.0.2.4 is the latest version. It just came out the other day, so that's probably why you're not aware.
Click to expand...
Click to collapse
I was aware just wasn't aware of the stability thanks for the heads up though!
Sent from my HTC Glaciee using XDA Premium App
Nicgraner said:
I was aware just wasn't aware of the stability thanks for the heads up though!
Click to expand...
Click to collapse
I usually worry about the same thing with brand new releases. In this case, it seems to be good to go.
Thanks man if it looks good to you I'll probably flash it
Sent from my HTC Glaciee using XDA Premium App
Thank you to all of you guys!! I'll try to do it this afternoon.
So I just need to follow this instructions: http://forum.xda-developers.com/showthread.php?t=858021 and find a good custom rom to install, right?? which kind of room do you recomind me, as I said I want the Nexus S apariance.
ringox said:
So I just need to follow this instructions: http://forum.xda-developers.com/showthread.php?t=858021 and find a good custom rom to install, right?? which kind of room do you recomind me, as I said I want the Nexus S apariance.
Click to expand...
Click to collapse
Once you're finished with that tutorial, you'll be rooted and have a custom recovery installed. At that point, create a Nandroid backup, and then wipe all three items in the recovery menu and install the custom ROM. There is no direct Nexus S port to the MT4G, but CM7 and RoyalGinger are essentially the same thing, and in fact better, so check those out in the dev section.

point me in the correct direction please.

okay so iv had my tab for awhile now and had no need to root it since i used my phone for everything. iv been playing around on android for a bit now and before my milestone i had fun with windows mobile. so please do flame me as dumb and that i didnt look first. i see the bible for our tabs and that the root method doesnt work now. i used heimdall to flash a stock rooted ver of froyo and now it boots but i cant get past the activation screen. yes i have dont the vol up once vol down twice thing. it wont work and just sits on the screen. i can get past it. so now im about to go all the way back to stock and start over. if someone who is more familiar with the fourms then i am can post the links and steps i need to do to get back to a rooted tab that would be great and id be forever thankful. from then on im ok i bought that bootstrapper from the maket to save me time (plus i enjoy giving money to those who work hard for my free entertainment) oh btw should have said it first. i have the vzw i800 tab. thanks so much folks i really just want a working tab again. oh one last thing i have cm9 running ony my phone and love it...whats everyones thoughts on it for the tab?
once again thank you
so i get it this was a tall order and after getting everything working last night im up and runnning with a cwr rooted and on froyo....i wanna jump up to hc or cm9, or some kind of ics but i dont see much and the two i looked at and tried, the dl links are broke...so can anyone point me to the links of working hc or ics for a vzw tab please
really? no one?
For ICS/CM9
First do this...
http://forum.xda-developers.com/showthread.php?t=1317384
Then do this..
http://forum.xda-developers.com/showthread.php?t=1385153
DON'T!
Overcome isn't for cdma ran.
You will brick your device.
Sent from my GT-P1000 using XDA
i guess at this point i just need to make it ext 4. what vzw kernel is best for this? thanks for the replay
You don't need to make it ext4, you need a custom recovery so can flash ICS using CWM. The ICS zip will repartition and reformat anyway, so you have no need of converting to ext4.
You need a kernel with custom recovery (version 3.x or greater).
C.
cheatman said:
You don't need to make it ext4, you need a custom recovery so can flash ICS using CWM. The ICS zip will repartition and reformat anyway, so you have no need of converting to ext4.
You need a kernel with custom recovery (version 3.x or greater).
C.
Click to expand...
Click to collapse
im good then i have cm on it and i think its 3.0 i tried flashing 5.x with rom manager and t started acting funny till i rebooted the recovery. i tried to install cm9 but it told me there was a problem with the package and gave me a code 7 i think. maybe it was a bad dl. ill try and redownload right now and try again. the first time i did everything manually but this time i was lazy and bought the bootstapper. i should be good right? thanks for your help.
i just re dl it and checked the md5. everything was fine. tried to install it and gave me the same thing. error in sd card/cm9 blah blah blah.zip (status 7) this is the step im having problems with
Which cm9 you tried to flash.
Maybe the GSM one?
Better go to rootzwiki.com and look for jt1134's ICS built there.
Sent from my GT-P1000 using XDA
going to that site now. i hope it works. im kind of pissed off. every rom i try the dl link is broken or it doesnt flash. im back to stock re rooted and did the bootstrap. i just wanna get off of froyo at this point.
sorry if I am leading you on a chase.
I am not a CDMA user, that is why I don't really know where you should get your CDMA build.
But I found this
http://forum.xda-developers.com/showpost.php?p=24986629&postcount=756
Go there, and find on 2nd line that says Alroger's Downloads.
That points to Alroger's external site.
He has a P1000CDMA build of the "TE4M version of CM9"
That will be your best bet.
jt1134 is also a TE4AM dev I think, or at least lots of his code in it.
priyana said:
sorry if I am leading you on a chase.
I am not a CDMA user, that is why I don't really know where you should get your CDMA build.
But I found this
http://forum.xda-developers.com/showpost.php?p=24986629&postcount=756
Go there, and find on 2nd line that says Alroger's Downloads.
That points to Alroger's external site.
He has a P1000CDMA build of the "TE4M version of CM9"
That will be your best bet.
jt1134 is also a TE4AM dev I think, or at least lots of his code in it.
Click to expand...
Click to collapse
no your not leading me to anywhere bad. its just a lack of upkeep on a old deivce its just harsh. im on that site you told me about and im finding a lot. im thankful youre helping me with this. do you know why im getting a error code (status 7) any and everytime i try flashing cm9? this is the nly things that stands in my way
from what I understand, error 7 is when the device you are flashing is not supported by the package.
Say earlier you tried to flash a p1000 rom into a cdma device.
I am almost convinced that if you get the right package, namely the one for cdma or "p1c" build, you should be able to flash it.
jt1134 is the most knowledgeable on CDMA CM9 builds.
yeah im on p1c builds and cdma builds....do you think its because im trying to go from froyo right to ics with out gb? should i flash cubbed in heimdall (3.2.x) before going to ics? or does it not matter on this device?
once again im so thankful for your help
which CWM version you have?
Apparently you need to have the latest 5.x.x ?
3.0...damn i didnt even think of that and i sould have thats whats going on with the photon right now. trying now thanks
that worked! thanks for the help

[Q] Been away - what's my next move after Royal Ginger 1.6?

Hi guys,
I don't like when people post "how do I root my phone?" when you can search 100 threads to root your phone, so I was hesitant to post this, but I've been away a year or whatever it's been, and I see a whole bunch of new ROMS that are totally unfamiliar to me.
I chose Royal Ginger 1.6 (based on android 2.3.3) way back when (still have it) because I thought it was a stable, non-SENSE plain android ROM that was much faster than the sense that came with my mytough 4g. And I was right. I know it was updated to 2.0 and then the DEV stopped, or whatever the demise was.
I didn't update to 2.0 at the time since I have one of the "bad chips", so it wasn't compelling enough to risk something that was working fine.
I'm getting the itch again to update my phone - it's cheaper than getting a new 4.0 phone and a new contract and $$$. Figured if I slap jelly bean on this it'll make it feel like I got a free upgrade.
Mostly I'm after something that is solid and not something I'd look back and say "why didnt I just leave well-enough lone?" where I'd lose functionality in things I'm used to. (camera etc)
What's the new Royal Ginger nowadays? What's the no brainer ROM to flash when reliability and compatibility is concerned?
Should I go back to entertaining CM nightlies? It seems that some of the andoid v3 ROMS are stable, and what about andoid v4-- isnt that too much of a reach to make compatible with this aging glacier that we have? Not too buggy to use a jelly bean aopk 4.x.x on this?
Thanks for any input
If u wanna stay aosp wuth everything working I suggest cm7.2 stable or nightly that GB For ICS/JB I suggested AospX, or Dark Jellybelly or the port O.O all pretty stable with little to no bugs
Sent from my HTC Glacier with Beats Audio™
for aospx, you mean this?
http://forum.xda-developers.com/showthread.php?t=1684835
if so, looks like plain android base of ICS, plus optimizations.
that sounds like what i need. still looking, but this is a good candidate.
funny, when you dont think of these things for a year, you get wobbly on the details.
i still have rom manager on my phone, with root and s=off, i'll have to read the talking points on how to update to make sure i do it right the 1st time...
acsi007 said:
for aospx, you mean this?
http://forum.xda-developers.com/showthread.php?t=1684835
if so, looks like plain android base of ICS, plus optimizations.
that sounds like what i need. still looking, but this is a good candidate.
funny, when you dont think of these things for a year, you get wobbly on the details.
i still have rom manager on my phone, with root and s=off, i'll have to read the talking points on how to update to make sure i do it right the 1st time...
Click to expand...
Click to collapse
I plan on building the milestone release tonight, so go ahead and take your time into getting back into things (unless you're eager to try BR7 ). I might be able to get it released tonight as well if everything goes right.
Sent from my MyTouch 4G using xda app-developers app
Thanks man. Read on another thread here you released the milestone or RC. I'll have to check it out.
question for you or anyone else reading this - maybe on that other thread I read about a guy who got into some boot loop trying to flash your rom I think the BR7 iteration, when he way trying to upgrade from royal ginger.
As I said that's the rom I have on there now, and so my brain brain froze a little while reading that.
Any people upgrading from Royal Ginger to this? Hey bootloop guy - did you ever get past your problem? (I think the responses to your post were to wipe again, reflash, etc etc, but I think you said you did that)
Thanks
acsi007 said:
Thanks man. Read on another thread here you released the milestone or RC. I'll have to check it out.
question for you or anyone else reading this - maybe on that other thread I read about a guy who got into some boot loop trying to flash your rom I think the BR7 iteration, when he way trying to upgrade from royal ginger.
As I said that's the rom I have on there now, and so my brain brain froze a little while reading that.
Any people upgrading from Royal Ginger to this? Hey bootloop guy - did you ever get past your problem? (I think the responses to your post were to wipe again, reflash, etc etc, but I think you said you did that)
Thanks
Click to expand...
Click to collapse
He likely had an older version of clockwordmod (someone else had similar trouble on another ics/jb rom) so just make sure you update it if you haven't in a while. I'd also suggest using 4ext if you're not using it already as people on cwm seem to be having trouble using it with the OTA Updater. Also, it allows you to wipe everything you need to flash a rom with just one option.
I'm on royal ginger 1.6 from way last year, and am ready to flash your aospx mr1.
I have ROM manager 5.0.2.1 and with that I flashed CWM Recovery (it downloaded it over data network nice and fast), just 2 days ago, so it must be the latest.
So you're saying that 4ext may be less prone to error... If I go with that, where does that leave ROM Manager, it stays installed- there's no reason to uninstall it? And the CWM recovery? Does 4ext flash its recovery right over my existing CWM recovery?
acsi007 said:
I'm on royal ginger 1.6 from way last year, and am ready to flash your aospx mr1.
I have ROM manager 5.0.2.1 and with that I flashed CWM Recovery (it downloaded it over data network nice and fast), just 2 days ago, so it must be the latest.
So you're saying that 4ext may be less prone to error... If I go with that, where does that leave ROM Manager, it stays installed- there's no reason to uninstall it? And the CWM recovery? Does 4ext flash its recovery right over my existing CWM recovery?
Click to expand...
Click to collapse
You can still use ROM Manager with 4ext. Yes, just flash it right over.
Sent from my HTC Glacier using xda app-developers app

Categories

Resources