Database Users

[ROM][BL1.1][BL1.2] GtabComb beta 3.3 (updated 7/27/2011) Gtablet\Zpad T2

MOD EDIT: AS WE ARE REORGANIZING THE GTABLET FORUM - ALL ROMS/KERNELS/ETC WILL HAVE THEIR Q&A POSTS MOVED TO THE Q&A SECTION.
THE Q&A LOCATION FOR THIS ROM IS HERE
Thanks.
---------------------------------------
STANDARD DISCLAIMER: USE AT YOUR OWN RISK. By running this firmware mod, you agree that there is the possibility that you may brick your device and neither myself, XDA nor Viewsonic are responsible for supporting you if that occurs. In this case, it is required that you learn and setup nvflash prior to running this mod.
This is a port of AdamComb with pershoot kernel and some tweak for performance and usability. Thanks all the greatest Adam, Vegan, Gtab devs that make this rom possible.
Install instruction:
1. Make sure the version of your bootloader and download the corresponding rom
2. I guess most of you should already be in CWM, but if you are not. update the recovery to CWM first. Stock recovery might work but you need to do some work and CWM is much better anyway.
3. Wipe data / Factory reset. It might work well, but you will most likely have problems without doing this.
4. Using the "install from sdcard" to install and enjoy.
Features: Very fast and stable
For AdamComb features, check its original post at tabletroms.
1. Overclocked by default, max frequesy adjusted by battery level.
-- you could use setcpu to adjust the min, max frequency. The build-in script for cpu management respect the setting from setcpu
2. Tweaked internal storage & SD card read speeds
3. Annoying ads in programs are blocked
4. Calkulin's battery saving script
5. data2loop works super well
6. pre-load some useful modules at boot time, e.g. cifs, ntfs, utf8, tun.
Known Issues:
1. Anything related to hardware acceleration
2. Stock Camera App does not work.
Beta 3.3: AdamComb v0.2 + pershoot's kernel 07/25/11
[BL1.1]
http://dev-host.org/bsnx1bmz8pgy/GtabComb_b3.3_bl1.1.zip
[BL1.2]
http://dev-host.org/k0zcozlozwgi/GtabComb_b3.3_bl1.2.zip
changelog:
1. update to pershoot 26.32.43 kernel. As already confirmed by some users, this version runs faster and hopefully it also resolve the BT tether issue
2. fix the "import" bug in init.rc.
3. change the label of sdcard and mircosd to be the same as in stock version. So far I have not got any issue and it does fix the "install unsuccessful" problem for some app.
4. remove some libs that does not use in gtab to free up some space. now all the libs in pershoot kernel are available in this rom. just edit the /system/etc/init.d/05modules to add your desired lib in the modules string.
5. Thanks all you guys for testing this and digging into issues. This help me a lot to resolve some issues here. It is the effort from all of us that make this rom better and better.
Beta 3.2: AdamComb v0.2 + pershoot's kernel 07/02/11
[BL1.1]
link: http://www.mediafire.com/?sy8oxpcrdufr4e3
[BL1.2]
link: http://www.mediafire.com/?xqoo08e1m49no1d
changelog:
1. battery life improved a lot
2. overall system performance improvement.
3. partially fixed bluetooth. Not sure how much it works (pulling some of bluetooth libs from flashback)
4. remove street and office app. put back camera app (it still fc, put it here so that some power user could play on it to see if we could find a fix here)
5. fix an issue that usb connect and debug notification does not disappear when the usb is disconnected (well, it still do not work if the usb is disconnected when the system is on sleep)
6. code reorganization and clean up. make it easier for some power user to change settings and plug in scripts without the need to unpack/repack boot.img. Hopefully we could have more power user to play with the system and further improved this rom.
7. change the cpu governor to respect on cpumaster, so you can use both setcpu or cpumaster to adjust the voltage if you really do not like the cpu managed by the buildin script.
8 change bootanimation (pulling from the bootanimation collection by thinkdevoid @tabletroms)
Again, back up and wipe data and factory reset (at least wipe dalvik cache) if you want a smooth experience. Almost all unexpected FCs are related to NOT wiping data
Beta 3.1: AdamComb v0.2 + pershoot's kernel 07/02/11
[BL1.1]
link: http://www.mediafire.com/?0cwkg59u6ict3t2
[BL1.2]
link: http://www.mediafire.com/?7q2w1ibvsilijar
changelog:
1. Update to AdamComb v0.2. the original wifi location seems to be broken occasionally and this one fix the wifi location permanently. the mount point for usb disk has been changed to work on media scanning.
Beta 3.0:
[BL1.1]
link: http://www.mediafire.com/?7wx3ati1135a1o1
[BL1.2] (the update-script say for BL1.1 but it is really for BL1.2)
link: http://www.mediafire.com/?x2fg6cjmreb8y1n
changelog:
1. switch to AdamComb base. This bring us HQ flashand more responsive and better UI with several other enhancements.
2. fix some issues after switching to AdamComb base.
==============================================
Beta 2.1: NI Adam HC + pershoot kernel
[BL1.1]
link: http://www.mediafire.com/?95tbbfhb7stht6z
[BL1.2] (the update-script say for BL1.1 but it is really for BL1.2)
link: http://www.mediafire.com/?icbym2xbhc6zmcw
changelog:
1. update to latest NI adam HC (07/05/2011 build)
2. update to pershoot latest kernel (07/02/2011 build)
3. remove NI Adam branding
4. remove some apps from system. we are running out of system space and those app could be easily get from market
5. add most small size modules in pershoot kernel. Automatically load ntfs, cifs, utf8, tun by default.
6. some small performance tweak.
Beta 2.0: NI Adam HC + Clemsyn kernel [BL1.1 ONLY]
link:
http://www.mediafire.com/?o25bc1azc01are2

BL1.1 ONLY
This is the old rom that based on Roebee's BOS HoneyComb. Check Roebeet's orginal post for more detail.
Besides the greatness of BOS, this rom also have some additional features:
1. Overclocked by default (max frequesy adjusted by battery level)
2. Tweaked internal storage & SD card read speeds
3. Annoying ads in programs are blocked
4. Calkulin's battery saving script
Known Issues:
1. All the BOS issues apply here
link:
alpha 1.6 (based on BOS_a6.0)
Note: users in other roms have mix experience on data2loop. It works very well for me, but I do not know how it will work for you. If it works well, you should expect data intesive apps (e.g. email, galary, market, etc) load much faster. If you do not know what data2loop is and its potential risk, do not flash a1.6.2. a1.6.1 already perform very well. you should wipe user data/factory reset before flashing a1.6.2 if you decide to try it.
--a1.6.2 (ext2 data2loop enabled. Very fast. Quardrant score: 3923)
http://www.mediafire.com/?5arqmra5lm082m5
--a1.6.1 (fix pc usb mount)
http://www.mediafire.com/?3d3462x5d658i6u
--a1.6.0
http://www.mediafire.com/?tjcvahig45ckwi2
alpha 1.5 (based on BOS_a5.2)
http://www.mediafire.com/?25ah3hrj1h1iazt

Just flashed this last night and had about 2 hours with it (not a lot of time at all but) I love it!!! It's my first Honeycomb ROM. Great so far... what a learning curve HC is? Just weird but I am getting the hang of it. Thanks all for your hard work!

pyro6128 said:
Loving the rom so far. Really great job, one question though. Is there a way to make it so pressing the home button takes me to the main screen instead of to the large clock? I'm probably just messing an easy setting or something, but I can't seem to find it.
Edit: For anyone interested, unless there is another way that I'm aware of, you can fix this by using titanium backup to freeze the clock in the backup/restore menu. This breaks the alarm clock though. Hope that helps, maybe someone else will have a better solution
Click to expand...
Click to collapse
Could you explain a bit more what is your issue?
What you mean by "large clock"?
I am on 1.6.2 and anytime I press home button I end on home screen. :-O

First HC rom here too, really nice interface improvements. Thanks to the devs for giving us this!
Is it just me, or is anyone else "missing" the menu bar at the bottom of the home screen with home, menu, back etc keys?
EDIT: Issue was resolved by wiping and reinstalling. Think it might have been caused because I launched VLT Launcher first time I booted up HC and not the default launcher.

hey guys, i just upgraded to this from vegan 5.1.1 and so far im liking it! Its worked fairly well for my games so far including plants vs zombies keep up the great work!

Video
How does this rom handle video formats? What video player works best? Thanks

kosenn said:
How does this rom handle video formats? What video player works best? Thanks
Click to expand...
Click to collapse
I am using UPnPlay + Rockplayer and so far it played everything I tried.
Only drawback is lack of fullscreen, but that is general HoneyComb issue:-(

johny.mnemonic said:
Could you explain a bit more what is your issue?
What you mean by "large clock"?
I am on 1.6.2 and anytime I press home button I end on home screen. :-O
Click to expand...
Click to collapse
When i would press home either on my gtab or on the screen, the screen would change to a large clock. If you've ever seen the desk clock feature on a droid (like when its in the dock), thats what it looked like.

I had the previous BOS version from this thread of 6/24 (?) and it ran fine. I downloaded 1.62 and it would not run - it would not go past lock screen. 1.61 did the same thing. Did full wipe before and after install, and downloaded both versions again and after install the same thing happened. I am now downloading 1.52 and will try that one.

mirror:
http://dev-host.org/ov6v6mo76sej/GtabComb_a1.6.2_bl1.1.zip
-deck

Major wifi issue
zyhong said:
thanks. will give it a try tonight.
never use ad-hoc and do not know it is broken. but BOS fixed it also mean this rom fix it
Click to expand...
Click to collapse
I just updated from a1.5 to a1.6 and found out that ad-hoc networks are not supported (I get error 82). Rebooted many times but still doesn't work. This is a great problem because I cannot use wifi tethering from my android phone therefore cannot go online!!! Any help?????

Same here as Aldo.Caruso - no adhoc wifi on 1.6.1
Sent from my Droid using XDA App

I noticed this rom doesn't have google talk installed. I pulled the honeycomb gtalk apk from bottle of smoke. So far it seems to work without issue. I have it attached here, just download and install like you would any other apk.

Good so far
Awsome ROM, only one problem so far for me. Facebook for Android 1.6 keeps saying I don't have a connection. While facebook with the browser works fine.

is anyone else having problems playing youtube videos (with in the youtube app) in HD? i can only play them in sd (very grainy in the large tablet screen)
But other then that excellent rom - thanks to all that are involved.

pyro6128 said:
When i would press home either on my gtab or on the screen, the screen would change to a large clock. If you've ever seen the desk clock feature on a droid (like when its in the dock), thats what it looked like.
Click to expand...
Click to collapse
Sorry, I had never seen that thing you are talking about. Picture will help here. But if you have such an app installed, go to application management in settings and check whether it is not marked as default app for home. If yes, reset that setting.
DireMerlin said:
is anyone else having problems playing youtube videos (with in the youtube app) in HD? i can only play them in sd (very grainy in the large tablet screen)
But other then that excellent rom - thanks to all that are involved.
Click to expand...
Click to collapse
There is no way to play HD flash videos on any HC rom AFAIK...

tenet420 said:
Same here as Aldo.Caruso - no adhoc wifi on 1.6.1
Sent from my Droid using XDA App
Click to expand...
Click to collapse
I decided to go back to alpha1.5 because lack of ad-hoc network support is too much an issue considering that Gtab is wifi only and tethering to my android phone is the only way to go online!!!
Anyway I just read this on the Slatedroid forum:
http://www.slatedroid.com/topic/18755-ad-hoc-network/
This file and method are meant for the Iconia Tab but I posted a question asking if it could work also on other tablets. Will let you know.

Could someone smarter then me try to explain why the heck you need such weird thing like ad-hoc wifi :-O
I know that Google disabled some useful things in Android, but I am sure ad-hoc was not disabled, it was simply ommited as completely obsolete and useless way of connection.
Every modern WiFi chip can act as AP, so there is no reason to use ad-hoc. Is it possible to secure it? I am not sure, but I doubt it...
Anyway, I am using my other android phone for wifi tethering and there is definitely no need for ad-hoc for wifi tethering...
But maybe I am completely dumb. In that case, please educate me a bit...

issues with 1.6.2 on GTablet UPC300-2.2
really like it, very fast and looks great. i have a few questions:
1. the camera is not working at all.
2. i have no volume control at all, it is full or off no in between.
Any one else see tjis or have a solution to fix it???
Thanks

121212121212121212

121212121212121212

I was hoping some post this here.
I wanted to know have you checked on stock kernel does it supports touchscreen work.
if not can anyone test and suggest which all kernels are supporting it and not.

anantshri said:
I was hoping some post this here.
I wanted to know have you checked on stock kernel does it supports touchscreen work.
if not can anyone test and suggest which all kernels are supporting it and not.
Click to expand...
Click to collapse
I got Aroma installer in X10S v8.2 addon zip (for unlock bootlaoader) and had no problem on stock or custom kernel.
However I never tried on fxp kernel.
For info there's a menu in aroma installer to config the touchscreen, values must be written in the config file (aroma config).
The only restriction for now is that Aroma installer is using Edify script so may cause problem on locked bootloader ... doesn't copy files or else ...
@Feravolt
Thanks for this thread !!!
About the script for locked bootloader did you have time to look at it ?
It would be very nice to include it directly in kernel .. maybe it could solve the problem with lock bootloader ?

Hi OP
Below is the latest Aroma File Manager's newest features :
- Terminal Emulator.
- Set Permissions.
- Auto screen calib.
Bugs :
- File copy, paste and move function from Internal Memory into SD Card (and vice versa).
- Scrolling Touch for X10, have to use volume buttons.
Any chance for X10 to have this recovery tool to be integrated in Kernel (for GB, ICS and JB) ?
Just incase if no backup file, PC/Laptop arround to repaire bootloop or bricked phone, easily .
Thanks in advance
Regards

OTG supported by Defy?

Hello, I saw some videos on Youtube referring to how to make your own OTG usb. Will Defy support it coz I various tasks to do if its possible ;/
S3nt fr0m my D3fy/w1u1 GB st4BL3

The answer is no.
AFAIK for OTG to work, we need some changes in kernel and that is not possible for us.

CM-11
nidhish91 said:
Hello, I saw some videos on Youtube referring to how to make your own OTG usb. Will Defy support it coz I various tasks to do if its possible ;/
S3nt fr0m my D3fy/w1u1 GB st4BL3
Click to expand...
Click to collapse
CM-11 supports USB OTG for Defy.
Enjoy

Yep, OTG is working in defies.. @Quarx made it

Yes it works, I actually used it and works fine.
Using Quarx's 20.01.14 rom, here:
http://forum.xda-developers.com/showthread.php?t=2515036

CM11-20140307, OTG - gives current withount mounting
Hi!
First of all - I would like to thank all you people creating this ROMs, fantastic work!
I encountered a problem that I failed to resolve with my google search skills.
[ I am running cm-11-20140307-NIGHTLY-mb526.zip (2.6.32.9 Kernel), BaNkS's 2-27_GApps_Minimal_4.4.2_signed.zip on Defy MB525 (Bayer module). OTG cable made by Akyga company.]
I can't use OTG service. I see no reaction in Catlog when plugging cable combined with three different card readers (+3 different memory cards). Two of them however light their LEDs up. Third one does not. Huawei E173-U2 modem lights up if it has no SIM in it. Sansa Clip+ player charges as well when plugged to Defy. Externally powered 3,5" HDD is not recognized by Defy as well. All of those devices I tried to connect "live" and with rebooting of the phone. No result.
Is this because all of those devices may be incompatible with MB525? Or maybe there is something I have to do to activate it, beside just plugging in the OTG cable? Going to settings>storage is now pointless as "mount sd card" is inactive (grey).
I am a bit confused, if it even should work on Kernel 2.6.32.9, because in the opening post of Quarx 4.4 topic ( http://forum.xda-developers.com/showpost.php?p=47185185&postcount=1 ) there is OTG mentioned under Kernel 3.0.8, download link leads to catalog with zips with kernel 2.6.32.9 and the "List of known issues" is all about the old Kernel as well. Maybe I am trying to do something impossible without 3.x Kernel?...
And by the way - is there a way to get into the bootloader, like it was before upgrading recovery to suit KitKat? There was an option to overclock CPU, that did not need to use RAM, like SetVsel does.
Thanks for attention!

I think there is a way
Hey
look at http://forum.xda-developers.com/showpost.php?p=50882400&postcount=3149
It helped me to install bootmenu in CM11 KITKAT 4.4.2 defy
and look at this http://forum.xda-developers.com/showthread.php?t=1447010 for more idea on good overclocking
thrackanomir said:
Hi!
First of all - I would like to thank all you people creating this ROMs, fantastic work!
I encountered a problem that I failed to resolve with my google search skills.
[ I am running cm-11-20140307-NIGHTLY-mb526.zip (2.6.32.9 Kernel), BaNkS's 2-27_GApps_Minimal_4.4.2_signed.zip on Defy MB525 (Bayer module). OTG cable made by Akyga company.]
I can't use OTG service. I see no reaction in Catlog when plugging cable combined with three different card readers (+3 different memory cards). Two of them however light their LEDs up. Third one does not. Huawei E173-U2 modem lights up if it has no SIM in it. Sansa Clip+ player charges as well when plugged to Defy. Externally powered 3,5" HDD is not recognized by Defy as well. All of those devices I tried to connect "live" and with rebooting of the phone. No result.
Is this because all of those devices may be incompatible with MB525? Or maybe there is something I have to do to activate it, beside just plugging in the OTG cable? Going to settings>storage is now pointless as "mount sd card" is inactive (grey).
I am a bit confused, if it even should work on Kernel 2.6.32.9, because in the opening post of Quarx 4.4 topic ( http://forum.xda-developers.com/showpost.php?p=47185185&postcount=1 ) there is OTG mentioned under Kernel 3.0.8, download link leads to catalog with zips with kernel 2.6.32.9 and the "List of known issues" is all about the old Kernel as well. Maybe I am trying to do something impossible without 3.x Kernel?...
And by the way - is there a way to get into the bootloader, like it was before upgrading recovery to suit KitKat? There was an option to overclock CPU, that did not need to use RAM, like SetVsel does.
Thanks for attention!
Click to expand...
Click to collapse

Thanks! I will consider procedure from the first link (warning mentioned there made me rethink my needs). The second one is one of the first things I've read before even trying OC. Worth mentioning anyway.
BTW, I still did not succeed with mounting anything via OTG. Tried about dozen mounting helper apps (not much sense, but much more hope). With no result.

New Finless ROM 1.7 for Measy u2c /B12/ Imito V2 (rooted)

Finless juste made a new rom (version 1.7) for these android stick:
Measy u2c / B12 / imito v2 (camera)
libstagefright inside
support and download here:
http://www.freaktab.com/showthread.php?4282-NEW-Measy-U2C-B12-Finless-ROM-1-7
my question.. Is he the only one who cook rom for android stick? cant find alternative here on xda...
anyway, a great Rom done by Bob!
Code:
Features in my Measy / B12 / Imito V2 ROM:
This is an entirely new system. This is not much from the original Measy/B12 ROM in this as fas as system goes.
Many features from my 1.6 ROM are of course in this along with new features.
BE SURE to check out the mouse wheel ZOOM function to enable google earth etc to zoom!!!!
Set it by going into settings>accessability> and turn on mouse zoom!
1) New "auto hide" status bar! To enable this go into settings>Display and turn it on.
Now anytime you run an APP it will automatically hide the status bar. Please note, some badly written APPs
can leave you in a stuck condition that you cannot exit the APP. You will need you keyoard exit key.
2) While you in settings>display there is another feature to force the settings menu icon in the status bar.
It is 3 dots vertically. NOw anytime you in a APP that has a settings capability, if you click that you get settings!
3) Lock screen is back friends! Now is settings>security you can
A) Disable the lock screen completely (default is slide)
b) Setup a pattern for lock screen
c) Setup a PIN for lock screen
d) Setup a password for lock screen
4) Sleep is back like a tablet!!!! Go into settings>display and you can turn on sleep!
Now understand how this works
a) If there is no wifi or ethernet connection, when it goes to sleep will power off.
b) If there is a connection, it will simple go into low power mode and turn the display off. Moving the mouse turns it back on again
5) I enabled location services. This is now in the settings menu. Tested and working with all APPs that use it.
remember to turn off GPS as we have no GPS.
6) New "grid" style launcher available as a choice of launcehrs.
Some people still want the Alternate launcher that comes with many TV sticks for EZ TV use.
I took this from the Neo X5 ROM as I liked it better than previous versions. This of course comes with the RK settings as well.
If you want to remove this just use ES File explorer and delete these files from /system/app
LauncherNEW.apk
AllApp.apk
RKSettings.apk
RKBasicsettings.apk
Now just reboot and all this will be gone.
7) Gameloft fix. This fixes Gameloft games from crashing to the desktop.
Many of them do not run and crash to the desktop. This is due to a license check based on the device.
Special thanks to Christian Troy for inventing this fix. I modded it for this ROM.
8) Build.prop edit to open up the Google Play store to APPs that normally say "not compatible".
I am spoofing a Samsung device that will show almost any APP as compatible.
YOur device will show up in google play as NOT a B12 device! Understand this please.
I also left the original buiild.prop in the ROM called build.orig.
If you want to go back, just use ES FIle Explorer or a root file explorer and rename build.prop to build.old
Then rename build.orig to build.prop.
Go into settings, apps, all and go into the Google Play app. Clear the cache and data.
Reboot! You should be back to showing up as a Minis Nexo X5.
9) Rockchip just released a updated libstagefright.so to try and fix HW decoding issues in XBMC.
Ihadd added this ot the ROM but have not fully tested it yet.
See info here regarding this new library.
http://forum.xbmc.org/showthread.php...756#pid1345756
10) As always, full init.d support! If you do not know what that is... ignore it. For geeks that want to use it. It is there!
11) RK Mirrioring is enabled. I have yet to figure it out or how to use it but if we ever do, its there.
I think we need a client on our tablets to use it. Hopefully more info will come from WiMo about this.
12) Remote Control using RK Remote APP is now fully supported!
In the ROM kit is a RKRemoteControl.apk.
You install this on your phone or tablet and now it can remotly control your TV player!
Just put the APK on sdcard or something and install it on your Android phone, tablet, etc.
ENJOY this one! I had a HARD TIME getting it to work!
13) I added a reboot APP that will allow optional reboot options like reboot to bootloader (flash mode).
14) As always I added the Xbox XPAD.KO module is now injected on boot. This was by request! Enjoy!
15) I added Xbox360 keylayout to fix some games and camera spin with xbox 360 controller. Per this post here:
http://forum.xda-developers.com/show....php?t=1792531
16) TUN.ko module is also added by request. (CIFS and MD4 are already in the latest kernel).
Be aware if you use another kernel other than whats in this ROM, you may have to manually insmod CIFS and MD4.
The files are in /system/lib/modules
This ROM has several options for you to choose from for flashing so please read carefully how to change these flash options.
I have provided 4 parameter files. These will increase APP space and decrease internal sdcard space.
1GB APP space (this is default setting for the flash tool).
2GB APP space.
4GB APP space.
6GB APP space! This is the max! This leave only 400MB of space for the internal SDcard.
___________________________
NOTE:
USB OTG port boot up:
Anytime the Measy/B12 is booted AND the OTG port is plugged into a PC, it will boot with USB storage turned on! What this means is on boot up you will not be able to see the internal SDcard or the External SDcard from within Android. On your PC you see the removable drives because on boot they are mounted to the PC not Android. Now you can this OFF once booted. Go into settings and USB. You will see PC connection is grayed out.
1) Click it and it will then put the check box in "conneted". Odd it is OFF by defualt even though it is really connected to the PC.
2) Now turn it off and it will unmount the SDcards from your PC and you can now see them in Android.
HOWEVER... Realize next reboot, it will be on again.
In my opinion this should not work this way but at least you can turn it off once booted.
The other work around is to always hook up the USB cable to the back micro USB port not the OTG port.
The back port ONLY powers the unit. There is no data connection on this port for PC.
This solves that issue. But remember the back port will NEVER connect to a PC or allow ROM flashes.
Only the OTG port allows that.

Can I install this ROM on MK809II?

ledzgio said:
Can I install this ROM on MK809II?
Click to expand...
Click to collapse
YES. And I think it's the best ROM for MK809 II. Try it and you'll see...

g.b.a. said:
YES. And I think it's the best ROM for MK809 II. Try it and you'll see...
Click to expand...
Click to collapse
Thank you! Is everything working with this ROM? even Wifi and bluetooth? I read that there are problems with them...

ledzgio said:
Thank you! Is everything working with this ROM? even Wifi and bluetooth? I read that there are problems with them...
Click to expand...
Click to collapse
Yes. They are working fine with this ROM...
Enjoy!

Hi I am looking for cmw flashable zip for mk808 will this work ?

g.b.a. said:
Yes. They are working fine with this ROM...
Enjoy!
Click to expand...
Click to collapse
I have heard that, with the MK809II because it doesn't have the reboot button, I have to open the device and do something inside...is it correct? do I have to do this operation even with this ROM?
thanks

ledzgio said:
I have heard that, with the MK809II because it doesn't have the reboot button, I have to open the device and do something inside...is it correct? do I have to do this operation even with this ROM?
thanks
Click to expand...
Click to collapse
Reboot?
If it is a normal reboot, you don't have to open the device.
There is a Reboot app included in the New Measy Finless 1.7 Rom.
Correct me if I am wrong but based on my understanding, you only have to open your device and do the "Shortcut" method when you are having
some problem in getting into recovery mode. or your small switch button is not working anymore...

Can I install this rom on my MK809III rk3188

are there some instructions/guide how to make rom for this little sticks on your own?

adiprince1 said:
Hi I am looking for cmw flashable zip for mk808 will this work ?
Click to expand...
Click to collapse
I would like to know this also.
Thanks
Sent from my SGH-T889 using xda premium

Kernel Patch Advice - LOS13

i was hoping i could implement this.
someone already made a patch for our device on the github link
it would be nice if someone compiled the kernel with the specific selinux changes so it doesn't have to be completely disabled
not sure what is done already in the available moto x pure patch
any input appreciated, i'm a noob when it comes to modifying kernels
just want to make sure its done right, and request compiling the latest LOS13 kernel with modifications.
https://github.com/pelya/android-keyboard-gadget
i'm still on the june 2, LOS13 rom
the kernel reports as:
3.10.102-CM-ga7d46cc8b84-dirty [email protected] #1
LOS13 thread:
https://forum.xda-developers.com/mo...m-unofficial-los13-moto-x-style-pure-t3554226
LOS13 downloads
https://www.androidfilehost.com/?w=files&flid=153188&sort_by=date&sort_dir=DESC

What's the purpose of this mod? Anything other than a fancy gadget?

QBANIN said:
What's the purpose of this mod? Anything other than a fancy gadget?
Click to expand...
Click to collapse
the main reason i want it is because it allows you to plug your cell phone into a pc with usb cable and your phone acts as a hardware keyboard without needing an app on the computer.
this is a feature i have wanted since windows mobile 6.5 went away...which worked elegantly for me back in the day.
i didn't have to lug around a keyboard and mouse for work, which i use daily, and have since i went android around 2007/08
i've been patient for years and here it is, and already pretty much ready for our current device.
just need someone to compile it, i dont currently have a linux box or use linux regularly.

Mhm... I'll take a look at this patch.

Ok, you can try it https://www.androidfilehost.com/?fid=745425885120759729 . This kernel includes android-keyboard-gadget.patch + modified selinux policy. I will release soon up-to-date LOS13 build with this patch included.

whoa, you da man

not working
installed boot.img from fastboot
rooted
installed app from market (usb-keyboard by pelya)
app freezes when plugged in to usb and then try and use the mouse pad in the app
unplug usb and mouse pad unfreezes
tried manually using terminal as su to disable selinux and chmod 666 /dev/hidg0 /dev/hidg1
app still didn't work
i am using the recommended hacker keyboard input panel
tried usb debugging on & off
let me know any ideas or if you need me to test something specifically if you are willing to have a look

got it working
had to choose 'midi input device' as selection for android usb notification dialog
'usb for charging' & 'usb file transfer' modes do not work

eigerzoom said:
(...)'usb for charging' (...) modes do not work
Click to expand...
Click to collapse
It works for me

QBANIN said:
It works for me
Click to expand...
Click to collapse
whatever works
this is really great
been waiting 10 years, i knew it was possible
have keyboard, will travel