Related
I'm on (or was) Gingerbread "ota" (second leak), and trying to sbf back to 2.340.
Using 2.340 SBF, on RSD lite 4.8, I get the error:
Failed flashing process. Phone[0000]: Error getting subscriber unit checksum. Device API Error: 0xE003003F. Command: RQRCS (0xE403203F); phone connected
Also, I cannot boot into the recovery.
Please help.
Other possibly relevant info:
Windows XP
RSD LIte 4.8
Not rooted (on GB)
Battery pull, only results in loading up the bootloader again (without pressing any buttons)
Bootloader says:
BOOTLOADER
30.04
Code Corrupt
re-download the SBF file (or check the checksum). Attempt to reflash again.
Will Re-Download SBF, however I've used this SBF before successfully.
I'm also now downloading RSD 4.9 rather than 4.8.
found this: Do a battery pull...then hold the home button and power at the same time to get into recovery. Press the search button, and use the volume button to select factory reset. Let it do it's thing, and select reboot system now...after that, it should boot.
snwagner said:
found this: Do a battery pull...then hold the home button and power at the same time to get into recovery. Press the search button, and use the volume button to select factory reset. Let it do it's thing, and select reboot system now...after that, it should boot.
Click to expand...
Click to collapse
I stated in my OP, that I cannot get into recovery. I know how to, but I cannot.
UPDATE:
Did all that was stated above, and was able to SBF.
However, once the SBF got to the rebooting process, it remained in a bootloop.
I am able to get into recovery now. And I did a factory wipe.
Still in bootloop.
SUggestions?
Pull battery...hold volume up and down then power....after about 3 seconds your phone will load up a black screen with white font and other stuff( debugging mode).... then plug usb to pc....load up rsd lite and flash sbf... if bootloops simply boot into recovery and wipe data... i had the same problem as you and this is how i fixed it....
Sent from my DROIDX using XDA Premium App
mr_villagomez said:
Pull battery...hold volume up and down then power....after about 3 seconds your phone will load up a black screen with white font and other stuff( debugging mode).... then plug usb to pc....load up rsd lite and flash sbf... if bootloops simply boot into recovery and wipe data... i had the same problem as you and this is how i fixed it....
Sent from my DROIDX using XDA Premium App
Click to expand...
Click to collapse
If you read my above post, I said that I did basically exactly what you just said. Im still in bootloops.
Oh sorry i thought that person mentioned holding the power button instead of the volume buttons... did you try rebooting your pc before using rsd again? If that doesnt work maybe try uninstalling drivers and rsd then reinstalling again.
Sent from my DROIDX using XDA Premium App
ITS ALIVE!
THE SOLUTION
I factory wiped like 3-4 times and then rebooted and it worked!
doronster195 said:
ITS ALIVE!
THE SOLUTION
I factory wiped like 3-4 times and then rebooted and it worked!
Click to expand...
Click to collapse
I joined the party late. Yea cwm sometimes wipes like a dirty person. I would always recommend doing it a few times when switching roms or in your case. It can't hurt the phone and sometimes the first wipe doesn't work.
im having the same problem!!!
except im STUCK on the
home+volume up+power screen
i used the same sbf i did the first time from the leaked gb and it worked fine
and well i downloaded nightlies to get liberty on my phone, and i wasnt a big fan of the text msg layout so i tried to clockwork mod (flash) into the deoxed gb but i still had a liberty boot and i thought nothing of it so i continued on and the phone worked fine itll it said gbkeyboard failed and i couldnt do anything!
so i turned it off and when i turned it back on flashwork was on!!! so i flashed the gb leak without root (the first one) and then i wanted root so i did the sbf but this time it said fail and my screen said it was still installing so i pulled the usb and the phone still said installing
so i battery pulled and my phone said code corrupted
so i tried the sbf back x3 still getting the same fail then i got to the part im at now,
code corrupted
battery low
cannot program
i left it on the charger for like an hour and its still "low"
am i soft bricked or hard?
[btw im stuck in the mode]
piax said:
im having the same problem!!!
except im STUCK on the
home+volume up+power screen
i used the same sbf i did the first time from the leaked gb and it worked fine
and well i downloaded nightlies to get liberty on my phone, and i wasnt a big fan of the text msg layout so i tried to clockwork mod (flash) into the deoxed gb but i still had a liberty boot and i thought nothing of it so i continued on and the phone worked fine itll it said gbkeyboard failed and i couldnt do anything!
so i turned it off and when i turned it back on flashwork was on!!! so i flashed the gb leak without root (the first one) and then i wanted root so i did the sbf but this time it said fail and my screen said it was still installing so i pulled the usb and the phone still said installing
so i battery pulled and my phone said code corrupted
so i tried the sbf back x3 still getting the same fail then i got to the part im at now,
code corrupted
battery low
cannot program
i left it on the charger for like an hour and its still "low"
am i soft bricked or hard?
[btw im stuck in the mode]
Click to expand...
Click to collapse
After the FULL sbf fails do the SYSTEM only and you should be good.
piax said:
im having the same problem!!!
except im STUCK on the
home+volume up+power screen
i used the same sbf i did the first time from the leaked gb and it worked fine
and well i downloaded nightlies to get liberty on my phone, and i wasnt a big fan of the text msg layout so i tried to clockwork mod (flash) into the deoxed gb but i still had a liberty boot and i thought nothing of it so i continued on and the phone worked fine itll it said gbkeyboard failed and i couldnt do anything!
so i turned it off and when i turned it back on flashwork was on!!! so i flashed the gb leak without root (the first one) and then i wanted root so i did the sbf but this time it said fail and my screen said it was still installing so i pulled the usb and the phone still said installing
so i battery pulled and my phone said code corrupted
so i tried the sbf back x3 still getting the same fail then i got to the part im at now,
code corrupted
battery low
cannot program
i left it on the charger for like an hour and its still "low"
am i soft bricked or hard?
[btw im stuck in the mode]
Click to expand...
Click to collapse
the low battery keeps it from being able to sbf (which is good because if it dies during an sbf, you are hard bricked. Since i am too lazy to type out full instructions, here is a quote from sysadmin x's guide
IF YOUR PHONE DIES DURING SBF
How to Fix
One thing that you may notice is that when you have this error, your phone will not charge the battery and you'll only be able to see the screen turn on if its plugged into the wall. Somewhere on the screen it will say "Your Battery is Low" and "Cannot Reprogram" or something like that. The easiest way to get through this is to find a friend with a charged battery or go to your local Verizon store and see if they have a demo phone they can use to charge your battery. If you're like me though you will not be lucky in any sense like this so you will have to find the MacGyver inside of you and get a little creative. What you need for this is an old USB cord. One end must be a standard USB cable head and the other can pretty much be anything. Once you have that, follow these steps:
NOTE: I TAKE NO RESPONSIBILITY FOR DAMAGE DONE TO ANY PHONE, BATTERY, ETC. FOLLOW THESE STEPS WITH CAUTION TO AVOID RISK OF DAMAGE.
1. Take your cable and cut off one of the ends, leaving a standard USB plug at the opposite end to plug into your computer.
2. Now you need to strip about and inch of the wire off until you get to the core where you should see 4 colored wires (red, black, white, and green). The colors don't really matter and they may vary, just as long as you can see a red wire and a black wire.
3. Strip off about a quarter inch of the rubber sleeving on the red and black cables, exposing the actual metal wire.
4. Twist the metal strands of each of the wires a couple of times so that all of the wires from the black cable are together and all of the wires from the red cable are together. This is just to make sure that you don't create a short circuit.
5. Here's where it gets a little tricky. You are going to use this cable to make the phone think the battery is fully charged, when in fact you will just be powering the phone using the power from the USB port. Pull out the battery on your phone and find the 4 exposed metal slots (the battery terminals).
6. Each of the far terminals should be labeled with a plus (+) or a minus (-). What you need to do is put exposed leads on the red wire up to the positive terminal and the leads of the black wire up to the negative terminal.
7. While still holding the leads on their respective terminals, slide the battery back into place in the phone. MAKE SURE THE WIRES ARE NOT TOUCHING WHEN YOU PUT THE BATTERY INTO THE PHONE! BAD THINGS COULD HAPPEN ONCE YOU PLUG THE CORD INTO THE COMPUTER!
Note: As tested by parm289, you can skip step 7 and just use the cable to charge the battery if you'd like. He recommends allowing it to charge for 6-7 minutes before placing it back into the phone. Thanks parm!
8. Once the battery is in place and the wires are on the correct terminals but not touching each other, plug the USB cord into the computer. If all has gone as it should, the screen on your phone should come on (may have to press the power button) and the phone should be telling you that the battery charge is okay and that it is okay to program. YAY! Your phone is almost back to normal!
9. Go back up to the previous section in this post that tells you how to reflash the .sbf and follow all of the instructions there. Once that has finished flashing the .sbf to your phone, your phone should be back to working order! You will most likely have to redo the entire setup on your phone but at least your phone is no longer a fancy paperweight
Click to expand...
Click to collapse
Borrow someone's droid x battery, or their phone to charge yours. that's gonna be alot easier than trying to strip the wires down. Also, check with p3droid (team black hat) they've been working on some fancy usb cables that will charge and flash.
thats exactly what the quote said, the numbers were there in case you cant get a charged battery. a last resort besides cutting the cable, you can go to verizon and ask to borrow a show floor battery, and give em yours so you can sbf. verizon is usually pretty nice
wow!!! thanks!
...but
now rsd says flashing failed
and the phone says its still installing
=/
I know the feeling! I have tried getiing into recovery from rooted GB usually just have to battery pull but have had to SBF for the 6th time. GB is great I benchmarked 2144 with Quadrant. Glad you fixed your phone.
And to think I went to Verizon and they wanted to send it to Motorola which they warned might charge me $300...
They also look at the battery to see if there's water damage... so this means you can just get a different battery and voila no water damage...
maybe if i use a different computer???
best part in all this i lost internet connection at home for a week
-.-
FFFMMMLLL
temp on blackberry storm ='[
i DOWNGRADED!!!!|
...ideas?
Hello! I think i bricked my phone. (MB525). With the latest Quarx CM10 everything is fine, the phone charge, etc... But randomly the phone dont charge anymore with wall charger or usb.
Now, i cant boot, the phone dont charge. When i connect to pc i see white led. With battery and wall charger i can access to bootmenu, recovery. But if i disconnect from wall charger the phone shutdown immediatly. So i cant flash any sbf via rsd lite. I try to restore an older nandroid, but nothing changed.
What can i do? Please help.....
Brother just flash or phones sbf Frm rsd lite u will search tutorial here
Sent from my MB526 using xda premium
illumanati22 said:
Brother just flash or phones sbf Frm rsd lite u will search tutorial here
Sent from my MB526 using xda premium
Click to expand...
Click to collapse
I cant flash it. Bootmenu or recovery only work with power cord on the wall. If i disconnect and try to attach the phone to pc (to flash) its shut down
XianHuen said:
Hello! I think i bricked my phone. (MB525). With the latest Quarx CM10 everything is fine, the phone charge, etc... But randomly the phone dont charge anymore with wall charger or usb.
Now, i cant boot, the phone dont charge. When i connect to pc i see white led. With battery and wall charger i can access to bootmenu, recovery. But if i disconnect from wall charger the phone shutdown immediatly. So i cant flash any sbf via rsd lite. I try to restore an older nandroid, but nothing changed.
What can i do? Please help.....
Click to expand...
Click to collapse
Hi, there!
I'm not an expert, but maybe I can give you a direction as a starting point.
Either your battery is empty and only needs to be reloaded or it is to old, so you have to get a new one.
A third posibility is, that the battery is empty and had not always contact to get loaded, but that I can't say from here and it's up to you, to check over.
And also your cable and your plug could be damaged.
Your options:
1. Reload your battery (and test its health) in another device or an external loader. You could put it in another Defy of a friend. Or bring it to a service center for cell phones for reloading.
2. You could otherwise buy an new (loaded) battery. Service center again?
3. Finally you could try the following method with the risk of a final damage to your battery:
http://forum.xda-developers.com/showthread.php?t=892026
Tell us, how it has been going for you.
Good luck!
:fingers-crossed:
XianHuen said:
Hello! I think i bricked my phone. (MB525). With the latest Quarx CM10 everything is fine, the phone charge, etc... But randomly the phone dont charge anymore with wall charger or usb.
Now, i cant boot, the phone dont charge. When i connect to pc i see white led. With battery and wall charger i can access to bootmenu, recovery. But if i disconnect from wall charger the phone shutdown immediatly. So i cant flash any sbf via rsd lite. I try to restore an older nandroid, but nothing changed.
What can i do? Please help.....
Click to expand...
Click to collapse
As long as the white LED is there, you are fine. Just charge that thing for some hours.
If you have a nandroid backup you can restore that without the battery but with the wall charger connected.
Swift2603 said:
As long as the white LED is there, you are fine. Just charge that thing for some hours.
If you have a nandroid backup you can restore that without the battery but with the wall charger connected.
Click to expand...
Click to collapse
Thank you guys! I try to charge it via usb, but the phone always started automatically after 5 minutes
That happened to me while ago, I just plug my phone to the wall charger and left it for like two hours and the battery charged quite fine.
XianHuen said:
Hello! I think i bricked my phone. (MB525). With the latest Quarx CM10 everything is fine, the phone charge, etc... But randomly the phone dont charge anymore with wall charger or usb.
Click to expand...
Click to collapse
I don't have any advice really, but just wanted to note that I've experienced something similar. I'm on the Nov 2 CMX build from Quarx.
Every couple of days, my phone won't charge when connected to wall charger or USB, signal bars never change, wifi is dead, and clock is dead. My phone basically stops functioning altogether until I reboot. Rebooting always seems to fix it for me though.
If you need advice on which SBF to flash send me a PM or something. I had to flash an SBF for the first time a month or two ago, and finding the proper SBF was the most difficult part of it all.
Thanks for the help guys, i can flash the sbf, but now i get "code corrupt" and "battery low" errors. I can charge the phone via pc, but its restart in 5 minute. I keep charging it, but after 3 hour its still "low battery" message. With wall charger, the phone enter to bootlader and 1-2 minutes later the "battery low" error disappear but no charging led. After this the phone dont have enough battery life (i keep doing this charging method for 2 hours)
Charge your battery longer.
Check the MD5SUM of your SBF
This post has been beamed to this area by quantum teleportation.
Coodarah said:
Charge your battery longer.
Check the MD5SUM of your SBF
This post has been beamed to this area by quantum teleportation.
Click to expand...
Click to collapse
I tried everything. When usb-pc in, i see the white led. 5 minutes later the phone enter to bootloader mode. Low Battery, Cant program error messages flashing. After 2 minutes the phones say "OK" and RSD lite recognize the phone! BUT! I cant do the whole flashing process, because 3 minutes later the phone shut down. If i wait to charge more in the bootloader more, its still shut down in 3 minutes.
I try to shut down the device everytime if its enter to bootloader, to charge more, but after 8 hours doing this, its still "low battery".
XianHuen said:
I tried everything. When usb-pc in, i see the white led.
[...]
I try to shut down the device everytime if its enter to bootloader, to charge more, but after 8 hours doing this, its still "low battery".
Click to expand...
Click to collapse
I think, we are at a point at which we are running in circles, my friend.
You tried just everything to reanimate your phone.
You must check your battery in ANOTHER device or load it in ANOTHER external charger to be sure that it's okay. Not in your phone and not in your PC.
If the battery charges well, then your phone is either physically damaged or bricked.
(Service Center needed)
Otherwise, if it's (battery) just charging fine and your phone boots up, first flash stock SBF and then flash what you want to.
If the battery isn't charging in that OTHER charger, then you know, you have to buy a new one.
Another thought, not very likely, but maybe your phone is damaged by overclocking/heat and suffers due to this under those permanent blackouts?
Bottom line is: you need another Defy with another battery to find out for yourself to solve your problem.
Unfortunately there is no wizardry
Question:
Is it necessary to go to boot loader for charging?
(I'm not sure about that.)
As a try, just let the phone off connected to power for a couple of hours.
__________
This post has been beamed to this area by quantum teleportation.
Thank you!
I flashed 4.5.3-109-fixed.sbf and i GOT MOTOROLA BOOT LOGO! but always bootloop.
Now, if i flash DEFYPLUS_U3_4.5.1-134_DFP-231_GR_SIGN_UCADEFYEMARAB1B80AA004.0R_PDS03C_USAJRDNGIBRRTCEE_P022_A022_Service1FF.sbf.gz
its okay? And i get fully working rom? (i know its defy+ but with the fixed sbf its partially working)
Glad to read that. This is good news :highfive:
Nope, unfortunately you won't get it running with a Defy+ SBF without having trouble/more work on your side.
Better download a MB525 SBF playing the game save. But it's your very own decision.
First see here (Maybe you already know all this stuff):
http://forum.xda-developers.com/showthread.php?t=1216982
Then, after lots of reading, swearing and understanding read on here:
http://forum.xda-developers.com/showthread.php?t=966537
_________________________________
Okay, I would take one of the MB525 SBFs from the "Android 2.2.2 "Froyo" section (3.4.2... or 3.4.3...)
NOT any Chinese SBF = no go!
But watch out for your Bootloader version (BL5, BL6) and your type of camera (red or green lense).
After flashing your stock ROM/SBF and the initial rooting, I would first make a NANDROID backup (CWM Custom Recovery) to have a clean ground.
Then I would first flash the stable CM7.2.0 and also do a NANDROID backup (CWM Custom Recovery) to have a solid home base for playing around.
Finally I would flash the latest Nightly of CM10 02.11. + Update from 07.11. completed with gapps minimal or gapps signed from 2012.10.11 (Google apps Android 4.1.2)
Much work to do for you, but remember: Even the longest way starts with only one little first step.
:fingers-crossed:
I flashed PA, GAPPS and then DER kernel; wiped cache and dalvik and rebooted. It booted fine and I restored all my settings. I ran a benchmark and in the middle of it, it cut off and wouldn't turn back on. I plugged it in to the stock charger and I got the charging indicator. Then after playing with the volume and power buttons I got it into download mode. I then moved to the computer to use the toolkit and reflash the stock rom and when I plugged it into the computer the charging indicator would not come on, went back to the stock charger and now the charging indicator wont come on. Now it won't do anything, no download mode, no bootloader, nothing.
Any suggestions?
I found one other thread where someone had the same problem and he ended up just RMA'ing.
TYIA
Leave it charging undisturbed for the night, try again tomorrow. It'll boot up again most likely.
Careful with the benchmarking. Which I'm sure you don't need advise for anymore I bet..
Let it sit over night on the charger, still nothing.
Sent from my Nexus 7 using Tapatalk 2
any solution please? i have same problem. only download mode and nothing
PeITeeR said:
any solution please? i have same problem. only download mode and nothing
Click to expand...
Click to collapse
When you plug in the phone do you get the red notification light? Have you tried letting the phone charge for several hours while off or opening the phone and disconnecting/reconnecting the battery?
Sent from my Nexus 4 using xda premium
You need to get out of download mode. Honestly I mash force rebooting the N4 and plug it in and out of the charge until something works, and every time without fail it works lol
Sent from my Nexus⁴
Try This...
PeITeeR said:
any solution please? i have same problem. only download mode and nothing
Click to expand...
Click to collapse
When in download mode press the down and up volume rocker and power button. Try this for some time and it must reboot into bootloader(android with open chest).
(try it when connected to computer too)
If you get it to bootloader you can restore it!!
1. Flash factory image . all info here detailed :::http://forum.xda-developers.com/showthread.php?t=2010312
2. If u cant do it yourself download mskip's toolkit and install drivers. Select option to restore to factory image and it must get you back to stock rom unrooted with only bootloader unlocked.
mskip's toolkit:::http://forum.xda-developers.com/showthread.php?t=1995688
Recovered mine..
ALL THE BEST..:good::good::good::good::good:
Hello everyone, i need help. Yesterday i installed cyanogen 11 rom on my milestone, but when the phone boots, it said setup wizard stopped working and i couldnt do anything, after that i flashed my device with 2.3.4 version, from 2.3.6. At that time i didnt knew that that will brick my phone. So now it wont turn on...when i put it on the charger led next to charger/usb flashes, when i connect it to usb led stays on. I read a lot threads on the forum but no luck. I just need to enter to bootloader so that i can flash it again, i tryed it with camera vol down and power but now luck. Anyone knows another way?
Thanks in advance.
I fixed it by using battery bypass. I wont delete thread maybe will help someone.
nikolacirjakovic said:
I fixed it by using battery bypass. I wont delete thread maybe will help someone.
Click to expand...
Click to collapse
How to do a battery bypass on motorola milestone 2?
sssloba said:
How to do a battery bypass on motorola milestone 2?
Click to expand...
Click to collapse
look here and here
Tnx but this don't do the magic for me.. It's the same, only LED lights up and no reaction on button press..
I'll have to try something else.
sssloba said:
Tnx but this don't do the magic for me.. It's the same, only LED lights up and no reaction on button press..
I'll have to try something else.
Click to expand...
Click to collapse
Sorry, but it worked for me...did you fixed it some other way?
Nope, not yet.
I'll try this with another cable. Also, i find a tutorial how to make Motorola factory cable, and i will try that when i find the time.
I can't put links here now, but it's called "How to Make Motorola Factory Cable to Unbrick Your Android! " on Youtube, maybe it can help someone elese.
I'm not giving up. :fingers-crossed:
sssloba said:
Nope, not yet.
I'll try this with another cable. Also, i find a tutorial how to make Motorola factory cable, and i will try that when i find the time.
I can't put links here now, but it's called "How to Make Motorola Factory Cable to Unbrick Your Android! " on Youtube, maybe it can help someone elese.
I'm not giving up. :fingers-crossed:
Click to expand...
Click to collapse
I almost killed my M2 last week, all my fault. When battery is too low, cable bypass is not enough to turn on with vol down + camera. But there is another trick in RSD lite.
Put the bypass cable in the M2 battery & phone then connect bypass cable in a wall charger (computer usb port has not power enough). Now plug the data cable in the M2 usb then connect to PC USB port. Phone still appears to be dead if you try to power on (try it). Go to RSD lite 5.7 and click "Show device" until device properties shows something. Now ignore that your phone looks powered off and go ahead flashing with RSD.
After flashing you will need to do a factory reset as usual, turning on with X pressed until triangle appears. Note that in some M2 you go to wipe menu pressing @ one or more times in triangle screen, while on other M2 you press vol up + vol down to get wipe menu.
Mine was bricked for the same reason, flashed BL, 2.3.6, then because I could not wipe (didn´t know that there was two ways to get menu), I messed up the entire thing, flashing 2.3.4 - phone dead with side led on when connected. Battery does not charge in this state, so after discharged I recovered this way.
Progress
Ok, this helps a bit......I managed to flash my M2 but still no startup screen.
When I did what you wrote, RSD Lite v5.7 did show my device and it started flashing it, in some point the screen on my phone lights up and shows "FW update in progress.." . Everything finishes nice with no trouble...rebote and PASS...
But there is no Motorola icon shown, neither I can start in recovery mode, or bootloader mode or any other that i tried.
When I connect it to PC with data cable, it makes sound like the USB device is plugged in, and it also can be seen in RSD Lite as connected device but nothing on the M2 screen... Same thing happens when i press power button on the phone while it is connected with the data cable.
Any idea why?!
By the way, tnx for helping me this much! :good:
sssloba said:
Ok, this helps a bit......I managed to flash my M2 but still no startup screen.
When I did what you wrote, RSD Lite v5.7 did show my device and it started flashing it, in some point the screen on my phone lights up and shows "FW update in progress.." . Everything finishes nice with no trouble...rebote and PASS...
But there is no Motorola icon shown, neither I can start in recovery mode, or bootloader mode or any other that i tried.
When I connect it to PC with data cable, it makes sound like the USB device is plugged in, and it also can be seen in RSD Lite as connected device but nothing on the M2 screen... Same thing happens when i press power button on the phone while it is connected with the data cable.
Any idea why?!
By the way, tnx for helping me this much! :good:
Click to expand...
Click to collapse
Excuse me, what sbf version are you trying to flash? Do you know your current BL version?
Please note that some sbf requires bootloader upgrade to 70.13 first.
And there is not direct downgrade - i.e. once flashed GB, flashing froyo bricks M2. Actually even between GB versions, once installed a R01 GB sbf you can not flash any R00 GB sbf. Some downgrades only this way.
Also there is not BL downgrade.
lampwarez said:
Excuse me, what sbf version are you trying to flash? Do you know your current BL version?
Please note that some sbf requires bootloader upgrade to 70.13 first.
And there is not direct downgrade - i.e. once flashed GB, flashing froyo bricks M2. Actually even between GB versions, once installed a R01 GB sbf you can not flash any R00 GB sbf. Some downgrades only this way.
Also there is not BL downgrade.
Click to expand...
Click to collapse
I also think he's trying to downgrade. Perhaps he flashed Latin America ROM, and now he's trying to flash UK one. I don't know, but what he describes looks exactly what I experienced when I tried to flash Froyo over GB.
IMHO he should try to flash the latest ROM, that means Latin America 2.3.6 GB.
rabinhood said:
I also think he's trying to downgrade. Perhaps he flashed Latin America ROM, and now he's trying to flash UK one. I don't know, but what he describes looks exactly what I experienced when I tried to flash Froyo over GB.
IMHO he should try to flash the latest ROM, that means Latin America 2.3.6 GB.
Click to expand...
Click to collapse
Yes, that is exactly what happened.
After reading some more about this, I now understand what was my problem....
Playing with my M2 I installed some CM versions, 10, 10.2, 11... and finally when I wanted to go back to stock rom, I find newer version than mine was, and there is the first mistake. I installed it not knowing that I can't do a downgrade later.
Secound mistake was that i TRIED to go back to my old stock rom, and....black screen happend.:crying:
But thanks to your help I now know how to fix it. And i did! :victory: :highfive:
My BL is 70.13 , and when i checked my CG31 with "smgver" it show that it is v4.
I can't go back to my old rom, but now I can install costum or some BR/AR gb except for persona&vivo,which is 4 as Endless7 explaned in his text.
Now there is only one more problem... the battery cannot be charged. There is icon like it is being charged, and also it says charging 1% and always is 1%.
I have original battery and one that is not original...neither one of those two can't be charged.
sssloba said:
(...)
Now there is only one more problem... the battery cannot be charged. There is icon like it is being charged, and also it says charging 1% and always is 1%.
I have original battery and one that is not original...neither one of those two can't be charged.
Click to expand...
Click to collapse
When connected with a wall charger a discharged battery should jump to 20% in config, battery. If locked in 1%, probably there is a mess in the battery state variable.
If you are using a custom recovery, try to clear battery state on it and select the option to fix permissions.
Doing again the master clear/factory clear also may work, but needs to config all the phone again.
Another thing to consider, any short circuit or wrong wiring while doing the bypass cable may damage the charger (or battery, or phone), do you have a spare one to test?
lampwarez said:
When connected with a wall charger a discharged battery should jump to 20% in config, battery. If locked in 1%, probably there is a mess in the battery state variable.
If you are using a custom recovery, try to clear battery state on it and select the option to fix permissions.
Doing again the master clear/factory clear also may work, but needs to config all the phone again.
Another thing to consider, any short circuit or wrong wiring while doing the bypass cable may damage the charger (or battery, or phone), do you have a spare one to test?
Click to expand...
Click to collapse
I tried both of this things, and none of them worked. When powered on, without charger, on the battery icon stands [!]
and when it is connected with a wall charger, icon changes to little lightning ( standard charging icon) inside the empty battery, without movements (battery do not changes colors, red, yellow, green). On lock screen says: Charging 1%, and same on the battery settings (1%).
That was on costum rom.
And on the stock rom in the battery icon stands [?], and when I connect it to the wall charger it says (with original Motorola battery inside):
"Invalid battery
Your device battery is invalid and cannot be charged.
Replace the battery with an original Motrola battery."
I changed the cable, and the charger, but I do not have third battery...short circuit...maybe...maybe.
One interesting fact, the battery seems to be charging, although it says 1%.
The original battery was empty at the begining, she couldn't even start the phone, and now phone is working on that battery....strange. Should it be able to do that, if there was a short circuit?
As far as I know, flashing stock sbf overwrites most config files, also battery statistics. Maybe the easiest solution would be to buy a new replacement battery - at least here, in Poland they go for 7-8$ - quite cheap IMO.
I remember when I was using MS2 that once I had this question mark instead of battery status - it heppened when I drained battery to zero, phone was unable to boot to charging mode, so I booted from another battery, and with a wall charger plugged in, I replaced battery with empty one. Then question mark sign appeared when there was no battery, but I don't remember how I got rid of it. Maybe it disappeared after some time? I don't know. But for sure it disappeared.
sssloba said:
I tried both of this things, and none of them worked. When powered on, without charger, on the battery icon stands [!]
and when it is connected with a wall charger, icon changes to little lightning ( standard charging icon) inside the empty battery, without movements (battery do not changes colors, red, yellow, green). On lock screen says: Charging 1%, and same on the battery settings (1%).
That was on costum rom.
And on the stock rom in the battery icon stands [?], and when I connect it to the wall charger it says (with original Motorola battery inside):
"Invalid battery
Your device battery is invalid and cannot be charged.
Replace the battery with an original Motrola battery."
I changed the cable, and the charger, but I do not have third battery...short circuit...maybe...maybe.
One interesting fact, the battery seems to be charging, although it says 1%.
The original battery was empty at the begining, she couldn't even start the phone, and now phone is working on that battery....strange. Should it be able to do that, if there was a short circuit?
Click to expand...
Click to collapse
Battery sign with a "?" shows when battery is completely uncharged (and before the master clear in my case). Power off the phone, install the bypass cable (again) and put it in the wall charger with phone powered off. Wait 15 minutes charging before power on and wait more 15 minutes charging. Now remove the bypass cable and let battery charge as usual before powering on again.
I did all of that. I downloaded some battery widget, and it shows the battery state 100%. Same is when i go to Settings=About phone=Phone status, battery status is charged 100%. Now the only thing is that in the original battery status icon is still [?].
The important thing is that battery is 100% full and phone is not broken, it works! !
@rabinhood
I flashed costum and stock rom.
I have replacement battery, and same thing happens on it. Also I tried changing them while charging...nothing.
Maybe it will disappear by itself if I wait long enough. :laugh:
Hi, my Le pro 3 (x727) is stuck on the boot screen. It shows the leeco boot screen then vibrates twice and then shuts off and repeat the process. My phone was unrooted and completely stock. Is it bricked? should I try to unbrick using the methods on this forum?
sau41 said:
Hi, my Le pro 3 (x727) is stuck on the boot screen. It shows the leeco boot screen then vibrates twice and then shuts off and repeat the process. My phone was unrooted and completely stock. Is it bricked? should I try to unbrick using the methods on this forum?
Click to expand...
Click to collapse
Okay can you provide more info
You say that it has never been rooted and never on a custom rom?
How long did you have the phone?
Were you using the stock charger and cable?
If its just a Brick
You can follow my instructions to unbrick.
https://forum.xda-developers.com/le-pro3/how-to/unbrick-leeco-phones-leeco-variants-t3847220
Read several times and properly install the software and drivers on your PC,. ( I cannot stress enough that you read the instructions of the OP and the first post underneath) If your phone is bricked those instructions will repair it.
If its hardware
Unfortunately, your issue could be a bad battery. Which is no big deal they only cost $8
If you have always used stock, and the issue is hardware its probably just the battery alone and nothing worse.
If it is something worse, it could be the usb card which is $13, I doubt that you would have a more serious issue such as a fried motherboard.
Good Luck
Let me know how it goes, on the unbricking thread.
tsongming said:
Okay can you provide more info
You say that it has never been rooted and never on a custom rom?
How long did you have the phone?
Were you using the stock charger and cable?
Click to expand...
Click to collapse
I had the phone on release date which was november 2016 i think. Yeah, I have never tried to root or install a custom rom. I am using an anker powerline+ since the original cable didnt last long, still using the original charger. I have tried both the cable and the charger on a Nintendo Switch and it seem to work fine.
I am currently downloading the files from your guide, the big one is taking too long though. Do you have any other link for
le_zl1_qfil_ufs_fix.zip?
Other observation/s:
The phone warms up when left on charge, no notification light though.
The phone's battery life was degrading which I thought was natural. Last time I check through Accubattery was at 84%.
Before the phone died, I checked the time through my phone which was 1:30 am and is less than 25% battery, woke up at 4:30 am and its dead. Phone was unplugged during that span.
sau41 said:
I had the phone on release date which was november 2016 i think. Yeah, I have never tried to root or install a custom rom. I am using an anker powerline+ since the original cable didnt last long, still using the original charger. I have tried both the cable and the charger on a Nintendo Switch and it seem to work fine.
I am currently downloading the files from your guide, the big one is taking too long though. Do you have any other link for
le_zl1_qfil_ufs_fix.zip?
Other observation/s:
The phone warms up when left on charge, no notification light though.
The phone's battery life was degrading which I thought was natural. Last time I check through Accubattery was at 84%.
Before the phone died, I checked the time through my phone which was 1:30 am and is less than 25% battery, woke up at 4:30 am and its dead. Phone was unplugged during that span.
Click to expand...
Click to collapse
It sound like the battery stats were off. Try leaving it plugged in overnight and then use this Qfil
le_zl1_qfil_ufs_fix.
https://androidfilehost.com/?fid=818070582850488404
tsongming said:
It sound like the battery stats were off. Try leaving it plugged in overnight and then use this Qfil
le_zl1_qfil_ufs_fix.
https://androidfilehost.com/?fid=818070582850488404
Click to expand...
Click to collapse
Thanks, but i got it back alive just this morning without flashing . I left it on repair mode (vol + - power) for a whole day to drain the battery. Then once I plugged it to the charger, it was running normally again. Is there any way to reset the battery stats?
sau41 said:
Thanks, but i got it back alive just this morning without flashing . I left it on repair mode (vol + - power) for a whole day to drain the battery. Then once I plugged it to the charger, it was running normally again. Is there any way to reset the battery stats?
Click to expand...
Click to collapse
That's great news! So apparently you had built up static discharge. In the past you could resolve this issue by simply taking the battery out and reseating it.
To clear battery stats
Boot to recovery , open file manager, go to data/system the down at the bottom you wiil find the batterystats.bin delete it and then reboot to system.
I do this about twice a month.
Take care, I am glad you got it working.
Sent from my LEX727 using XDA Labs
tsongming said:
That's great news! So apparently you had built up static discharge. In the past you could resolve this issue by simply taking the battery out and reseating it.
To clear battery stats
Boot to recovery , open file manager, go to data/system the down at the bottom you wiil find the batterystats.bin delete it and then reboot to system.
I do this about twice a month.
Take care, I am glad you got it working.
Sent from my LEX727 using XDA Labs
Click to expand...
Click to collapse
Im pretty new to this, but on recovery I can only see update and recover(format). I suppose I need a tool or something. I already downloaded flash2 and qfil, are those the tools that i need?
sau41 said:
Im pretty new to this, but on recovery I can only see update and recover(format). I suppose I need a tool or something. I already downloaded flash2 and qfil, are those the tools that i need?
Click to expand...
Click to collapse
I thought your phone was working?
You don't need those files unless you have a brick. Go to the TWRP website for learning about the functions of TWRP
Double post, read below.
tsongming said:
I thought your phone was working?
You don't need those files unless you have a brick. Go to the TWRP website for learning about the functions of TWRP
Click to expand...
Click to collapse
Yup it's working, I just need to reset the battery stats. Anyways, thank you so much. I'll head to TWRP and do some reading.
tsongming said:
I thought your phone was working?
You don't need those files unless you have a brick. Go to the TWRP website for learning about the functions of TWRP
Click to expand...
Click to collapse
Hey, sorry to bug you again but my phone went back to bootloop. I tried draining the battery again but this time it didnt work. I went on and flash qfil and was successful at it. The problems is, right after flasing qfil, I rebooted the phone by long pressing the power button, but it just goes back to bootloop at the leeco logo. What could be wrong?
sau41 said:
Hey, sorry to bug you again but my phone went back to bootloop. I tried draining the battery again but this time it didnt work. I went on and flash qfil and was successful at it. The problems is, right after flasing qfil, I rebooted the phone by long pressing the power button, but it just goes back to bootloop at the leeco logo. What could be wrong?
Click to expand...
Click to collapse
I made a whole thread for these kinds difficult issues. Read the OP and my posts #2 and #3 on that thread.
https://forum.xda-developers.com/le-pro3/how-to/unbrick-leeco-phones-leeco-variants-t3847220
If all else fails, you can mail the phone to me to attempt doing it for you. Read the thread.