Dear all,
Excuse me for bad english, i m french,
I have a special serial USB cable XIRING 0x0F14:0005, start normally on MAX OS X, and ubuntu, but not on acer 500, in the log of dmesg, an error occurred about cdc_acm, is it possible to had this vendor / product on cdc_acm, to have this one ok.
May be, using insmod / modprobe, is it possible ?
I use taboonay 1.4
Anyone here have the solutions?
Related
Hi there,
I'm trying to get linux working with XDA2...
At the moment, I use HARET to boot the kernel, but I encounter some problems.
1. USB Serial Connection is breaking when booting the new kernel. I wouldn't have assumed anything different. But the Xda-Developers tutiorials shows how to connect via that virtual port.
2. I can use the real serial port to redirect Kernel Output until it says: "Login:"
I'm using minicom to get the output. But I can't enter the username. I'm sure that I use correct port settings, is there anything special with the connection to the XDA2? Should I use another Application to login? What's wrong with my serial input line?
Can somebody tell me how to use the Serial port via other Terminals? (Linux shell commands are highly appreciated.)
Thanks in advance for some hints!
Edit:
I also tried to compile custom kernel, but after haret switches to the dark screen (after showing the linux logo with splashed eyes ), it isn't redirecting any output to PC.
hi. you should first tell which software versions you are using.
Himalaya kernel is not maintained for a long time, but it's
not very difficult to update it.
Versions I use:
HaRET-0.3.6.exe (http://anymore.nl/ipaq/haret-0.3.6.exe)
zImage-2.6.12 (http://himalaya.lange.nom.fr/zImage-2.6.12)
initrd-2.6.12.gz (initrd-2.6.12.gz)
Hardware:
Processor: Intel PXA263
Model Nr. PH10A
Flash Chip type: 28F128k3
I just buy the Usb-otg-cable from ebay witch it work fine with Ubuntu in Hd2 .But in Andriod in use this zimage Zimage to have it work for Driver .When i put usb-flash-drive in the terminal it said usb-flash-drive connected .but i can not access file on it because it doesn't mount yet.So i need the detail processor. how to use the usb-host in andriod on hd2. which kernal i need to use ?. Which software or command i need to use to access my file in my usb-Flash-Drive? or Another Usb Device on Android
Thank and sorry for my bad English
Tineprogramming
http://htc-linux.org/wiki/index.php?title=Leo/Status
usb host : android is not build for this
erikvario said:
http://htc-linux.org/wiki/index.php?title=Leo/Status
usb host : android is not build for this
Click to expand...
Click to collapse
I know it's a dated thread, but we know now that android is able to have Usb OTG as seen in SG2...we know also that Hd2 have the needed hardware so...someone know more in order to reach this new implementation for our Leo?
It would be great to use it on HD2.
Hi all and sorry for my bad english
I've succesfully created a chrooted Ubuntu 3,5GB image disk for webtop that was like a charm.
But when i wanted to share it with the community, I receive an segmentation fault in xterm and all don't function : it requires me to reinstall completely the webtop...
Can anyone help me with this segmentation fault because I don't know what is it and I've already searched on the web...
You are my final way to make it good !
Thank you for your help
HI,
I am trying to interface the UVC Camera to the Samsung Galaxy Tab 10.1(GT-7510) , but I am not able to see the device node getting created in the shell( I have installed the Linux terminal Shell Application) and rooted the device using this Video .Can somebody plz tell/advice how I can achieve it and access the device Node or at-least get it created.
Following is the log on dmesg :
usb 1-1 new high speed USB device using tegra-ehci and address 97
hub 1-0:1.0 unable to enumerate USB device on port 1 ,
usb 1-1:device v0ac8 p3420 is not supported
On My Laptop I get this output on Dmesg :
[12307.364237] uvcvideo: Found UVC 1.00 device Venus USB2.0 Camera (0ac8:3420)
[12307.366108] input: Venus USB2.0 Camera as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/input/input14
[12308.537059] usbcore: registered new interface driver snd-usb-audio
also i can see the camera getting blinked on connection which proves that it is getting the power-supply and getting connected with the system.
I think there is a support for UVC USB devices in the kernel (not sure) otherwise I am ready with the Kernel For Samsung Tab 10.1 (GT-7500 (Higher Version: GT-7510)) from here .(GT-P7500_MEA_Opensource.zip (requires Login).
Plz assist.
Rgds,
Softy
You seem to know a bit about what you're doing. I'm not really familiar with this device. I did a search and did not find anyone who has don't this yet. The first priority is to get a Linux device in /dev/ folder. This is generally handled by a device driver and a udev rule. Try the newer kernel if you can. The android 4.0 ics has a Linux 3.x kernel. See if switching to ics helps. Try compiling a custom kernel with all modules. Once you have a device, try using SSH or sftp from your desktop under Linux to stream from that device with vlc or another media player.
Do you have any examples of this device in use on mobile Linux? It may require writing an entire kernel driver.
HI,
Yes that is the same line of thinking for us as well.We are trying to compile the kernel and load it .- Ongoing
I believe only the zImage is the one which is to be flashed.But I am little scared to do this.Couldn't find the instructions to loading the Zimage even though I can compile one.
Rgds,
Saurabh
softy007 said:
HI,
Yes that is the same line of thinking for us as well.We are trying to compile the kernel and load it .- Ongoing
I believe only the zImage is the one which is to be flashed.But I am little scared to do this.Couldn't find the instructions to loading the Zimage even though I can compile one.
Rgds,
Saurabh
Click to expand...
Click to collapse
Flash it with Heimdall, even if it won't work you will be still able to get into download mode of bootloader (which you aren't supposed to flash) and reflash the kernel with stock one.
Hi everybody,
Like video said, I'm noob !
I come from french and surely I'm not the better englishman of france, but I need you and I try to resolv my problem :=)
I have iconia a500, and go with it in holidays.
In my room, only RJ45 for internet, not WiFi... And my lady NEED internet ^^
That's why I try to use this device.
But, when I try to use it... It doesn't works :=/
I've seen that with taboonay it can works but it's rom for 3.2 and I am in 4.03...
Here my configuraiton :
CWM-based Recovery v5.5.0.X(thor2002rorev1.7)
Flexreaper 5.1
I use Trendnet TUE2-ET100 for network adaptator.
Have we one rom who can help me plz ?
I wait your help if it's possible.
Thank you.
Hi,
Nobody can help me ?
It would be probably better to just buy simplest access point out there and use it as a bridge between ethernet cable and wifi . You don't even need router functionality if the tablet will be the only device used. Just buy AP, configure it and just connect the cable to the RJ45 socket and voila.
You will probably need to connect AP to the PC with a cable to configure it but you need to do this only once. You need to configure the wifi name and security (preferably WPA2 PSK).
Hi,
Thank you for you answer !
Can we resolv problem without AP ?
The reason it's that we go to hotel and I bagage is full... xD
With USB analyser software (or application), I can see one information about my LAN adaptator... But it doesn't works when I try to use it.
I don't know if one other kernel can help me or if it's with other custom ROM...
Thank you very much for your help and your solution !
But if we have other possibility it's ok for moi :=)
Merci ;=)
Try the following:
Reboot the tablet (do not connect ethernet adapter yet)
In the terminal emulator display run dmesg (you can dump it with dmesg > /sdcard/dmesg1.txt for comparison)
Connect adapter
Run dmesg again and check for differences at the end (dump it with dmesg > /sdcard/dmesg2.txt and then compare both files).
This will tell if the kernel itself is recognizing the device properly as a networking device. If it doesn't then you need different kernel or kernel module for the current one for this device.
If the device is recognized and the proper kernel module is loaded and still no connectivity then one of the following can be true:
The device doesn't send request to acquire IP from DHCP (dhcp client in the rom not configured to support other devices than the built-in ones).
The device receives the IP, but the routing is not being set so the connection is not set as a default route.
The Android itself doesn't recognize the new interface and apps cannot start the connection using Android API (OS thinks it is offline).
Unfortunatelly I don't know much about how the networking on the application level works in Android and I don't have any USB ethernet adapter to do some tesing myself. I would need to ask some friends if they have one.
Very thanks to your help and sorry for this.
Below results dmesg after plug usb adapter.
Usb 1-1: new high speed usb device number 2 using tegra-ehci
Usb...: new usb device found, idVendor=0b95, idProduct=2,
Usb... : new usb device strings: mfr=1, product=2, serialnumber=3
Usb... : product: ax88772
Usb... : manufacturer: asix elec. Corp.
Usb... : seriaonumber xxxxxx
We can see that android see usb device.
But, when i made <ifconfig>, i can see only the wlan0 interface, no eth0 or other...
Maybe i have to mount it ?
Thanks for your help.
No, you don't mount network devices .
It seems that the tablet is not loading any kernel module for this device. I've done some searching and this device requires usbnet and asix modules to be loaded. I have checked if I have those module in my a500 (running CM9) and I don't have any of them.
I think that you would need to build your own kernel with proper modules to gain support for this adapter.
OMG xD
Build my own kernel
ok ok, let's go, I have already help my father to build house, I can did it !
...
Is it difficult to build kernel ? ^^
Are there any tutoriel for this ? or I need help of xda's members ?
Like other post, thank you for your interest and your help.
Sorry to make you spend time on my case
I'm sorry but my knowledge about compiling kernels is limited to PC Linux. I've never crosscompiled kernels for ARM architecture. It shouldn't be that hard. I think that you will need the Android SDK to do that. Search the dev forum.
I've been thinking about the module itself and you probably don't even need to compile whole kernel. You just need the kernel header files for the kernel you are using and you can probably compile the module alone and then just copy it to device. But you need to ask someone that is more knowledgable in this area than me.
hello, have you managed to build module for ICS or jellybean?
i have the same USB LAN adapter (i'm french too ^^)
Hope to have a positive reply!!!
thanks