Apparently prl 60680 is out now for update enjoy! Flash to sense rom and update
someone please upload it so I can apply it without having to flash a sense rom
Sent from my HERO200 using XDA App
No difference in my area at least
ill tell oostah so he can put it in his thread
Bierce22 said:
ill tell oostah so he can put it in his thread
Click to expand...
Click to collapse
its up have fun
No difference. Updated via LiquidSense.
updated prl from Sprint Touch Pro 2 thats on a boost mobile account I just pulled the PRL as of today and located in the chicago area if that makes any difference.
No difference here ... Boston
Think it made reception worse is it hard to revert back to a previous prl. Link to directions, please. Fort Wayne, IN
Can someone post the zip file for 60680 prl thanks in advance!
look in the main prl thread youll find all of them there.
Related
I just did a a PRL update and i dont have version 60666 now i have 60667 what does this do??
verse187 said:
I just did a a PRL update and i dont have version 60666 now i have 60667 what does this do??
Click to expand...
Click to collapse
Just changes what towers your phone prefers to use. It may give you better service in some areas, or it may not do anything for you.
Thanks bro
ok when i touch firmware, update profile, and prl nothing happens, they dont open. htc software update does. what gives?
just update my phone and it has the 60670 prl version also pri is 1.34_003
Thanks brah~
Good lookin'
cmsixedEVO
Confirmed PRL 60670 PRI 1.40_003
also confirmed PRL 60670 pri 1.40
ryohei47 said:
also confirmed PRL 60670 pri 1.40
Click to expand...
Click to collapse
also confirmed
Just wondering what PRL have to do with PRI? Why are people posting PRL and PRI version as if there was an update for one so there must be for the other too?
Sent from my PC36100 using XDA App
i called sprint tech today about an issue with the network in my area and he suggested a prl update and it was still 669o and he said it was the most recent, he then pushed a remote profile update but im not sure what the changes are...there were no noticeable changes
Hmmm....I'm getting the dreaded 1012 error when I try to update. Oh well.
bludragon742 said:
Hmmm....I'm getting the dreaded 1012 error when I try to update. Oh well.
Click to expand...
Click to collapse
have you tried profile update first? i dont know why but it sometimes helps when i get network errors
Yup same thing.
FYI Folks, I just did a system update check and there was one available...downloading it now.
Hope you all are as lucky!
If it is 1.86 then it has been out for a while.
Ok, now I'm panicking...it downloaded the firmware, asked me to install...I clicked yes and now I have a fuggin Triangle with an ! plus the android bot...WTF
No, it was 4.1.83.en.US
Do I need to unroot for it to install?
I am assuming your rooted? and deox? i would say you would have to revert to same procedure when 1.5.7 came out. Ie: restore bloatware/deox files
It downloads and reboots phone, it than starts extracting file and thats where it craps out.
K, looking at how to de-ox, new to android..only had this for 2 days.
Thanks for nothing liar. I have no update in NY. Also not to be a ****, but this should be in general unless your posting the sbf
Sent from my MB860 using XDA Premium App
Not lying...and if I knew how to do that I would...I was running stock rom, rooted and I had manually uninstalled some of the bloatware.
Anyone got a quick link to how I deox this?? no biggie ill look around.
jank0023 said:
Not lying...and if I knew how to do that I would...I was running stock rom, rooted and I had manually uninstalled some of the bloatware.
Anyone got a quick link to how I deox this?? no biggie ill look around.
Click to expand...
Click to collapse
I can say you aren't lying cause I am getting the message too. It says it is 1.83 but the weird thing is is that I am on the bell atrix but I used Seven's method to install GingerBlur so it says I am on att but I am actually on 1.4.2
Sent from my MB860 using XDA App
Update is available OTA in Portland, OR this morning. 3 people in my office have the Atrix and we all had the update available this morning.
They are probably going in batches guys just be patient it is rolling out in Dallas, TX i've been checking every day just got mine this morning takes about 15 minutes total and your on 2.2.2 and HSPA
Sent from my MB860 using XDA Premium App
jank0023 said:
Ok, now I'm panicking...it downloaded the firmware, asked me to install...I clicked yes and now I have a fuggin Triangle with an ! plus the android bot...WTF
Click to expand...
Click to collapse
If your new to android why would you not like the rest of us READ the fourms before 1. Posting in the wrong section 2. Ask a question that can be answered by doing a little research 3. Root without knowing how to revert back. We are all here to help as long as your not a donkey!!!!!
The chat support told me this:
The software version 4.1.83 is already being rolled out. It will be released by batches to all AT&T and Motorola Atrix.
Click to expand...
Click to collapse
I got it now..
Im on Rooted&Sideloading @ Stock 4.1.5.7 .
What do i need to do now?
System update is a go in Maui!
Sent from my MB860 using XDA App
Just got it in Orlando, FL
Wait so I'm going to go ahead and assume this wont work for the bell atrix. It says at&t in the message. Is it an international update?
Sent from my MB860 using XDA App
Ratchet556 said:
Wait so I'm going to go ahead and assume this wont work for the bell atrix. It says at&t in the message. Is it an international update?
Sent from my MB860 using XDA App
Click to expand...
Click to collapse
No... this is not a Bell update.
Well for some reason it is updating without me doing anything.
Sent from my MB860 using XDA App
I got the update this morning for 1.83 here in NYC
jank0023 said:
Ok, now I'm panicking...it downloaded the firmware, asked me to install...I clicked yes and now I have a fuggin Triangle with an ! plus the android bot...WTF
Click to expand...
Click to collapse
I was getting the same error, I think it was because I tweaked my build.prop . I restored my build.prop from a back up version and now the update is going through.
only things I modified were build.prop, sideloading, root. I'm able to update without restoring to a previous stock image.
Can someone post zhis pwulease? I got cupcakes and icey cream..
Custodian said:
Can someone post zhis pwulease? I got cupcakes and icey cream..
Click to expand...
Click to collapse
i tried to find it. no aval.
Same here, I can't find it...
Help support autism awareness,it only takes 2 seconds to help make a difference...
http://picketfenceblogs.com/vote/3616
ecooce said:
Same here, I can't find it...
Help support autism awareness,it only takes 2 seconds to help make a difference...
http://picketfenceblogs.com/vote/3616
Click to expand...
Click to collapse
Same... I was just looking around as well.
qbking77 said:
Same... I was just looking around as well.
Click to expand...
Click to collapse
If you have the OTA is there anyway to extract it?
Custodian said:
Can someone post zhis pwulease? I got cupcakes and icey cream..
Click to expand...
Click to collapse
Ok it somebody can tell me how to extract it then I can post it. I have the over the air version on my phone but I don't know how to post it.
jamice4u said:
Ok it somebody can tell me how to extract it then I can post it. I have the over the air version on my phone but I don't know how to post it.
Click to expand...
Click to collapse
If you do, I will love you full homo. Hahahaha!
They are too excited with their stock recovery and rom to actually pull the stupid file, rather than SAYING OMG UPGRADZ! Damn kids, I don't want to flash back to stock to get this stupid modem.
jamice4u said:
Ok it somebody can tell me how to extract it then I can post it. I have the over the air version on my phone but I don't know how to post it.
Click to expand...
Click to collapse
It should be and update.zip file. Check and see how big the new file is. If it isn't over 10mg then you may have a winner. Though we would have flash it through stock maybe also and not through CWM
heathmcabee said:
It should be and update.zip file. Check and see how big the new file is. If it isn't over 10mg then you may have a winner. Though we would have flash it through stock maybe also and not through CWM
Click to expand...
Click to collapse
Doubt it, i got the OTA and found no Update.zip on my sd card where else would it be?
ac16313 said:
Doubt it, i got the OTA and found no Update.zip on my sd card where else would it be?
Click to expand...
Click to collapse
If you installed the update it erases itself usually. You have to pull it before the install. It's like a package in Mission Impossible. It'll self-destruct after a few seconds.
The Root said:
If you installed the update it erases itself usually. You have to pull it before the install. It's like a package in Mission Impossible. It'll self-destruct after a few seconds.
Click to expand...
Click to collapse
Correct, you have to actually pull the file before it installs. We need someone who gets the OTA and then decides to share. We have a bunch of 10 yr olds with too much excitement here. We need someone, (and I'm about to do it myself) to go to stock and pull the update and post it here for the modem.
The Root said:
If you installed the update it erases itself usually. You have to pull it before the install. It's like a package in Mission Impossible. It'll self-destruct after a few seconds.
Click to expand...
Click to collapse
hmm if i downgrade then to EF02 will it ask me to upgrade again you think?
ac16313 said:
hmm if i downgrade then to EF02 will it ask me to upgrade again you think?
Click to expand...
Click to collapse
You might have to completely redo the whole thing. No idea what triggers OTA's. I'd say try redoing the modem only, if you can.
The Root said:
You might have to completely redo the whole thing. No idea what triggers OTA's. I'd say try redoing the modem only, if you can.
Click to expand...
Click to collapse
Ill see what i can do then
This OTA does not behave like a typical update where it downloads a file then reboots into recovery mode and installs. It reboots your phone into somekind of download mode and installs from there. I rebooted my phone to get the prompt again and I can't find any sort of file that was downloaded to my SDCard. Now maybe it's somewhere in the actual phone memory but I have no idea where to look.
CapsLockKey said:
This OTA does not behave like a typical update where it downloads a file then reboots into recovery mode and installs. It reboots your phone into somekind of download mode and installs from there. I rebooted my phone to get the prompt again and I can't find any sort of file that was downloaded to my SDCard. Now maybe it's somewhere in the actual phone memory but I have no idea where to look.
Click to expand...
Click to collapse
Yeah same here the phone downloads it confirms with you the installation and reboots.
it is downloaded to the phone but idk where . any clue where it might be?
*Edit* oh and btw when you update the modem it goes in a loop(update to EF02 it tells you to update to EF10, and vice versa)
Woah, am I missing something? So EF02 was leaked eairler? But EF10 is offical ota update, and everybody should get it?
Sent from my SPH-D700 using XDA Premium App
sryans2004 said:
Woah, am I missing something? So EF02 was leaked eairler? But EF10 is offical ota update, and everybody should get it?
Sent from my SPH-D700 using XDA Premium App
Click to expand...
Click to collapse
Its just an OTA Modem update not the whole ROM
sryans2004 said:
Woah, am I missing something? So EF02 was leaked eairler? But EF10 is offical ota update, and everybody should get it?
Sent from my SPH-D700 using XDA Premium App
Click to expand...
Click to collapse
If you install the leaked EF02 and go into "Upgrade Firmware", it actually pushes some sort of OTA that upgrades the baseband to EF10. Problem is once you do that every time you reboot the phone it does an automatic firmware check and wants you to upgrade back and forth from EF02 to EF10 to Ef02 etc.
So I've heard reports about the OTA being released for 4.0.4 and I understand it's supposed to be a 2 week rollout schedule. This isn't a thread asking when I'll get it (I haven't).
Just let me know if you guys have gotten it yet, or what you're planning on doing. Make this a fun pole.
I am uncomfortable talking about your fun pole.
t1n0m3n said:
I am uncomfortable talking about your fun pole.
Click to expand...
Click to collapse
+1 on this.
---------- Post added at 10:42 AM ---------- Previous post was at 10:41 AM ----------
P.s. I miss my Nexus
Haven't got mine I don't know if they are going by states but I'm here in Arizona.
Sent from my Nexus S 4G using xda premium
instead of waiting for the ota you can get it straight from Google yourself if you wanted..
https://code.google.com/android/nexus/images.html
Sent from my Nexus S 4G using Tapatalk
kyouko said:
instead of waiting for the ota you can get it straight from Google yourself if you wanted..
https://code.google.com/android/nexus/images.html
Sent from my Nexus S 4G using Tapatalk
Click to expand...
Click to collapse
so does that mean you didnt take his poll
kyouko said:
instead of waiting for the ota you can get it straight from Google yourself if you wanted..
https://code.google.com/android/nexus/images.html
Sent from my Nexus S 4G using Tapatalk
Click to expand...
Click to collapse
Awesome, I hadn't realized it was posted on Google's page... I blindly assumed it wouldn't be because they weren't officially supporting CDMA Nexus phones off OASP anymore.
Mr.Esp said:
so does that mean you didnt take his poll
Click to expand...
Click to collapse
<_< Theres a poll? Tapatalk doesn't show me that
I was responding to his "let me know if you guys have gotten it yet" part of his OP post.
Sent from my Nexus S 4G using Tapatalk
I just had a pop up that said a system update was available so I clicked install and it went into my cwm recovery and said something about it wasn't signed correct and installation was aborted. Was that the update to 4.0.4?
Edit: by the way I'm rooted and went back to gingerbread last night because I was having problems with the room I was running.
Official ICS 4.0.4 OTA Pushing & We got the Google update.zip download link!
Want to update manually? OTA pushed out and they have the manual update.zip link..
http://www.androidcentral.com/how-manually-update-your-nexus-s-4g-ice-cream-sandwich
Enjoy!
jimisdad said:
I just had a pop up that said a system update was available so I clicked install and it went into my cwm recovery and said something about it wasn't signed correct and installation was aborted. Was that the update to 4.0.4?
Edit: by the way I'm rooted and went back to gingerbread last night because I was having problems with the room I was running.
Click to expand...
Click to collapse
Yeh if you're running CWM you're probably not going to be able to get the OTA, it relies on the stock recovery I believe.
I have it and haven't installed it yet, can't figure out how to pull it before I apply it so others can get it. I am trying to do it without rooting if anyone can help let me know...
raiderep said:
I have it and haven't installed it yet, can't figure out how to pull it before I apply it so others can get it. I am trying to do it without rooting if anyone can help let me know...
Click to expand...
Click to collapse
Android Central already had the official OTA "update.zip" pulled hours ago..
See the link below.
http://www.androidcentral.com/how-manually-update-your-nexus-s-4g-ice-cream-sandwich
Paul627g said:
Android Central already had the official OTA "update.zip" pulled hours ago..
See the link below.
http://www.androidcentral.com/how-manually-update-your-nexus-s-4g-ice-cream-sandwich
Click to expand...
Click to collapse
OK guess ill install it then, just trying to be useful around here, my bad
Sent from my Kindle Fire using Tapatalk 2 Beta-6
raiderep said:
OK guess ill install it then, just trying to be useful around here, my bad
Sent from my Kindle Fire using Tapatalk 2 Beta-6
Click to expand...
Click to collapse
Sorry didn't mean to sound rude... I posted the same thing a few posts above about 5 minutes after it was pulled and posted at Android Central. You must not have seen the earlier post.
Paul627g said:
Sorry didn't mean to sound rude... I posted the same thing a few posts above about 5 minutes after it was pulled and posted at Android Central. You must not have seen the earlier post.
Click to expand...
Click to collapse
No worries, just bored and would like to learn how to pull files without root...I am pretty sure I could before but forgot how lol
I flashed back to rooted 2.3.7 and got the notification within minutes of the upgrade
Paul627g said:
Want to update manually? OTA pushed out and they have the manual update.zip link..
http://www.androidcentral.com/how-manually-update-your-nexus-s-4g-ice-cream-sandwich
Enjoy!
Click to expand...
Click to collapse
Thanks!
The update is working very well. Seems much faster and smoother.
I got the update just now. I was running a stock rooted rom and checking for updates like crazy and checking in like google was my untrusted girlfriend but no luck. Then i use one click stock to go completely back to stock and the update started instantly. Just remember to update to 2.3.7 first because stock is on 2.3.4 and reports showed error if you werent on 2.3.7.. its been since december i waited for this moment. custom roms were fun but stock 4.0.4 OtA just feels good to the soul.