Ok, I'm about to smash my phone into pieces...
Today I tried to install the new version of FroyoBread (020) and everytime my phone shows the FroyoBread boot logo and reboots...
I tried to do a clean install.. I formatted data, system, cache, dalvik cache and then I installed custom.zip and it still reboots...
Then I formatted the SD card...It didn't work.
I also tried to flash stock (root,xrecovery) and install it again...It didn't work either..
Please help me.. I have never had this problem before so I don't know exactly what to do...
I'm sorry if this has already been asked before (I checked Froyobread F.A.Q. thread but there wasn't any question like this!)
I'm also sorry about my English..(still learning)
*EDIT* Solved!
firmware and baseband version?
...
Hi there.
That happened to me too!
What i did was just flash it with original 2.1 rom and then, after root it again, full wipe, cache wipe, dalvik..., i installed froyobread and worked!
Best regards!
Sew00 said:
firmware and baseband version?
Click to expand...
Click to collapse
OMG...I'm so stupid!...it was the baseband...
I flashed the stock 2.1.1.A.0.6 and I didn't even notice that my baseband was 006...
Thank you so much.
anant123 said:
OMG...I'm so stupid!...it was the baseband...
I flashed the stock 2.1.1.A.0.6 and I didn't even notice that my baseband was 006...
Thank you so much.
Click to expand...
Click to collapse
Hahaha
Glad i could help.
Related
I have a problem with all 2.2.1 ROMs.
I can't install any application, neither from market nor from my sd card.
In the market when I press OK (to accept permissions) nothing happens.
When I try to install from my sd my phone stucks at "installing" screen...
I tried factory reset, format cache, wip cache/dalvik cache, fix permissions...
None of them worked. I searched for solutions but the only thing I found was to clear cache...What can I do??
ps: In older miniCM builds I didn't have that problem...
and sorry for my English, I hope you understand...
EDIT* SOLVED..
I'm not sure because i'm not a developer, but don't you need to update your baseband when your switching to newer Android custom roms?
I've met the same problem the other day,it seems that it is my not wiping my phone before i switch to newer rom that causes it.Im not sure and im not a developer,too.
@deoxx
My baseband is always 015. I mean it doesn't change... Right now I'm using racht's cm7-54 and I don't have this kind of problem...
@Rrc111
Because I didn't understand exactly what you said, you mean that I don't have to wip cache or that I have to wip cache before install the new ROM??
anant123 said:
@deoxx
My baseband is always 015. I mean it doesn't change... Right now I'm using racht's cm7-54 and I don't have this kind of problem...
@Rrc111
Because I didn't understand exactly what you said, you mean that I don't have to wip cache or that I have to wip cache before install the new ROM??
Click to expand...
Click to collapse
after installing from xrecovery, do a factory reset before restarting the phone
treebill said:
after installing from xrecovery, do a factory reset before restarting the phone
Click to expand...
Click to collapse
I tried but it didn't help...
Okay so I'm quite new to all this, and today I rooted my phone, installed xrecover and all that, saved a back up, imported new back up (floyo-0.20) restored the new one, but then when I reboot my phone it just goes from the sony ericson logo to hackdroid, turns off and repeats,
Anyone know what I've done wrong and how i can fix this?
Did you made a full wipe from xrecovery after installing froyo?
Some times you must clean the Rom.
Yours GreatApo
(X8 under MiniCM)
GreatApo said:
Did you made a full wipe from xrecovery after installing froyo?
Some times you must clean the Rom.
Yours GreatApo
(X8 under MiniCM)
Click to expand...
Click to collapse
Yeah, I did a full wipe.
Any other ideas
Did you flash your phone to the last firmware and baseband? I read that these roms requires firmware and baseband updates.
Hey everyone.
I moved from Aus to the UK this week and thought Id be clever and install the 3 stock rom to my i9505.
For some reason now, its horribly laggy, i get FC's galore, and the phone is unusable.
I have reflashed the firmware using ODIN a bunch of times, with no difference.I have also tried to wipe all caches and data, but when i try to do the cache, it hangs for ages and says Unable to mount 'data' or unable to mount cache.
Im really at a loss now... I am currently downloading Australia XSA (June 2013) to install to take it as far back to stock as I can but i dont really feel this will be that much different to the other 3 rom *aside from bloatware etc). Am I wrong?
Have i deleted a partition somehow?
If anyone can help me, ill be stoked.
kiwiboy1978 said:
Hey everyone.
I moved from Aus to the UK this week and thought Id be clever and install the 3 stock rom to my i9505.
For some reason now, its horribly laggy, i get FC's galore, and the phone is unusable.
I have reflashed the firmware using ODIN a bunch of times, with no difference.I have also tried to wipe all caches and data, but when i try to do the cache, it hangs for ages and says Unable to mount 'data' or unable to mount cache.
Im really at a loss now... I am currently downloading Australia XSA (June 2013) to install to take it as far back to stock as I can but i dont really feel this will be that much different to the other 3 rom *aside from bloatware etc). Am I wrong?
Have i deleted a partition somehow?
If anyone can help me, ill be stoked.
Click to expand...
Click to collapse
looks like problem with recovery ( i had similar problem with SGS2) but hard to tell .... so why dont you try:
- reset to factory
-use odin 304 not 307
- or flash twrp recovery and than try to wipe data...system...
p.s. my problem with sgs2 was resoved as soon as i flashed twrp
dublinz said:
looks like problem with recovery ( i had similar problem with SGS2) but hard to tell .... so why dont you try:
- reset to factory
-use odin 304 not 307
- or flash twrp recovery and than try to wipe data...system...
p.s. my problem with sgs2 was resoved as soon as i flashed twrp
Click to expand...
Click to collapse
Cheers for that. Im using 3.04 already... and now trying TWRP but the same issue..
does anyone have a confirmed recovery link? IM not sure if i have been using the right one..
kiwiboy1978 said:
Cheers for that. Im using 3.04 already... and now trying TWRP but the same issue..
does anyone have a confirmed recovery link? IM not sure if i have been using the right one..
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2238442
try PhilzTouch http://forum.xda-developers.com/showthread.php?t=2281367
---flash original rom that came with phone.....
dublinz said:
http://forum.xda-developers.com/showthread.php?t=2238442
try PhilzTouch http://forum.xda-developers.com/showthread.php?t=2281367
---flash original rom that came with phone.....
Click to expand...
Click to collapse
Flashing an AUS rom semed to do the trick. Im still running the stock recovery right now though.. TWRP seemed a little messy for my liking.. the touch options were all over the shop.
I think ill look for a good version of CWM.
cheers!
Hey guys! I am a bit of a noob on installing roms. I have a rooted s4 then I installed cwm. I restored touchwiz first just in case then flashed cm11. I liked touchwiz better so I restored it and its always stuck in a bootloop. I dont really know what information to give you since I'm a noob at this. My phone isn't with me right now but I'll be getting it soon. Also I flashed cm11 again so its usable. I haven't seen any thread that has this problem with the same phone.
imthesmallkid said:
Hey guys! I am a bit of a noob on installing roms. I have a rooted s4 then I installed cwm. I restored touchwiz first just in case then flashed cm11. I liked touchwiz better so I restored it and its always stuck in a bootloop. I dont really know what information to give you since I'm a noob at this. My phone isn't with me right now but I'll be getting it soon. Also I flashed cm11 again so its usable. I haven't seen any thread that has this problem with the same phone.
Click to expand...
Click to collapse
Hi mate ,
I guess when you said restored TW you mean backup, nandroid?
When you restored your copy of nandroid , did you did a factory reset ,clean dalvik and cache...it helps
imthesmallkid said:
Hey guys! I am a bit of a noob on installing roms. I have a rooted s4 then I installed cwm. I restored touchwiz first just in case then flashed cm11. I liked touchwiz better so I restored it and its always stuck in a bootloop. I dont really know what information to give you since I'm a noob at this. My phone isn't with me right now but I'll be getting it soon. Also I flashed cm11 again so its usable. I haven't seen any thread that has this problem with the same phone.
Click to expand...
Click to collapse
The right way, if you want touchwiz back, is this:
go to your recovery, select wipe data. Wipe it and after that restore your backup, than clean cache. This should work fine
MAX 404 said:
Hi mate ,
I guess when you said restored TW you mean backup, nandroid?
When you restored your copy of nandroid , did you did a factory reset ,clean dalvik and cache...it helps
Click to expand...
Click to collapse
yup sorry.
I didn't wipe cache, dalvik and other stuff when I did it but I tried restoring after I have cleared dalvik, cache, data and also a factory reset and it still goes into a bootloop.
imthesmallkid said:
yup sorry.
I didn't wipe cache, dalvik and other stuff when I did it but I tried restoring after I have cleared dalvik, cache, data and also a factory reset and it still goes into a bootloop.
Click to expand...
Click to collapse
Hi ,
What recovery you have?
just to confirm , when you talk about restore you mean nandroid? or you mean like Titanium?
MAX 404 said:
Hi ,
What recovery you have?
just to confirm , when you talk about restore you mean nandroid? or you mean like Titanium?
Click to expand...
Click to collapse
right now I can't tell which version of clockworkmod recovery I have since my phone isnt with me but I'm getting it real soon.
When I say restore I mean restoring using cwm. I think its called nandroid but I'm not sure.
imthesmallkid said:
right now I can't tell which version of clockworkmod recovery I have since my phone isnt with me but I'm getting it real soon.
When I say restore I mean restoring using cwm. I think its called nandroid but I'm not sure.
Click to expand...
Click to collapse
Ok ,
When you get it back , let us know
MAX 404 said:
Ok ,
When you get it back , let us know
Click to expand...
Click to collapse
I have ClockwordMod Recovery v6.0.3.2
imthesmallkid said:
I have ClockwordMod Recovery v6.0.3.2
Click to expand...
Click to collapse
Hi mate ,
That seems a little too old , update it the latest one from Philz or Twrp
What model S4 you have
MAX 404 said:
Hi mate ,
That seems a little too old , update it the latest one from Philz or Twrp
What model S4 you have
Click to expand...
Click to collapse
Okay sure.
I have an i9500
Flash the latest file from here: https://goo.im/devs/philz_touch/CWM_Advanced_Edition/i9500/
go to download mode. Select AP in Odin3.09 and uncheck auto reboot
MAX 404 said:
Hi mate ,
That seems a little too old , update it the latest one from Philz or Twrp
What model S4 you have
Click to expand...
Click to collapse
I have updated it. Should I try restoring the backup? Sorry for the late reply
imthesmallkid said:
I have updated it. Should I try restoring the backup? Sorry for the late reply
Click to expand...
Click to collapse
yes sure , try to restore your nandroid back up , if the backup is not currupted it should be fine
MAX 404 said:
yes sure , try to restore your nandroid back up , if the backup is not currupted it should be fine
Click to expand...
Click to collapse
the lockscreen works but it keeps saying something like user proccess is not responding do you want to close it? then there is wait or ok. I tried to open the camera from the lockscreen and it works. I think the backup is corrupted. Do you think I should flash a rom like touchwiz? if yes, do you know any good ones?
imthesmallkid said:
the lockscreen works but it keeps saying something like user proccess is not responding do you want to close it? then there is wait or ok. I tried to open the camera from the lockscreen and it works. I think the backup is corrupted. Do you think I should flash a rom like touchwiz? if yes, do you know any good ones?
Click to expand...
Click to collapse
Hi mate ,
you can try to
Clear from recovery dalvik and cache
or Factory reset
Or as you said flash another rom ( full wipe !! )
I like Omega rom...but there are many other out there that are good
Hi Guys,
i updated my Galaxy S4 I9505 to Snapshot M12. Still got freezes when i charge it overnight (its connected to the original charger the whole night). I only can do a hard reset to use my device again because the touch-screen doesnt work then. This is very annoying because i use my device with Alarm to get up in the morning.
I already did a few clean installs, wiped all caches and formated all data and Cache aswell. Still freezes. Sometimes i get them from waking up my device (mostly in the morning between 5-6 am). I already sent a few errors through the integrated report-System. But ist still not fixed.
Any ideas ??? I really Need help with this !!!
I use this Modem I9505XXUGNG8
Thanks
I suggest new kernel, googy max is compatible with cyano, I use and the battery have more life....
i thought the same but i wasnt sure. i tried all but not kernel. i always use the kernel that comes with cyanogenmod. i tried a few modems and still doesnt work
i try it later that day. thx for your answer.
When you have install cyano have make wipe or have make a dirty flash?
Isolameteo_Sardegna said:
When you have install cyano have make wipe or have make a dirty flash?
Click to expand...
Click to collapse
I made a clean install. wiped everything, formated cache and data, then install
EDIT: I installed Googy Kernel now. I see tomorrow if my problem is fixed
Playa82 said:
I made a clean install. wiped everything, formated cache and data, then install
EDIT: I installed Googy Kernel now. I see tomorrow if my problem is fixed
Click to expand...
Click to collapse
ok, make me update....
Isolameteo_Sardegna said:
ok, make me update....
Click to expand...
Click to collapse
will do. i see if it works tomorrow between 5-6 am when i get up.
Ok, its 5:24 am and freeze again now i dont know what to do... Even with googy kernel i get a freeze...
Playa82 said:
Ok, its 5:24 am and freeze again now i dont know what to do... Even with googy kernel i get a freeze...
Click to expand...
Click to collapse
The only ideas is revert to m11, maybe solve our problem....
I installed cm11 fresh again. But i dont think my problem is gone.
Update me tomorrow... Hope for you... Goodnight
Ok, will do
Nightly 11/21 works for me now :-/
But i see tomorrow if its ok. All i did is an new clean install. i formated all folders on my internal sd with clockworckmod. maybe this was the problem, because i didnt formated all folders.
Playa82 said:
Nightly 11/21 works for me now :-/
But i see tomorrow if its ok. All i did is an new clean install. i formated all folders on my internal sd with clockworckmod. maybe this was the problem, because i didnt formated all folders.
Click to expand...
Click to collapse
ok... maybe that was the problem... See tomorrow ...
Isolameteo_Sardegna said:
ok... maybe that was the problem... See tomorrow ...
Click to expand...
Click to collapse
Update Again freeze...
at this point I think it is a problem of cyano. Try other rom. The cyanhacker ...
I reverted to Stock and rooted from the beginning. Now im on Snapshot m12. I had to flash GNG8 Modem again. But i flashed only modem. Before i always installed Modem and Nholos. I think that was the Problem.
Playa82 said:
I reverted to Stock and rooted from the beginning. Now im on Snapshot m12. I had to flash GNG8 Modem again. But i flashed only modem. Before i always installed Modem and Nholos. I think that was the Problem.
Click to expand...
Click to collapse
Update me tomorrow... Hope for you that's solve the problem....
OK, first day and no freeze. I hope it is fixed now.
2nd day no freeze. I think modem and Wifi fix/NON-HLOS was my problem.