@MODS_ALL
I have a HTC touch dual which was in espanol language (movistar branded) and i had did hrdspl 1.22 and was trying to load a english rom when the flashing stopped inbetween and now the phone just goes into the tri colour mode! i did try to flash back a rom thru the RUU, but the phone is not found on the system and when i tried the SD card function it gives me an error "0080022" and says not allowed!
so is there any way i could get hold of this rom to flash back thru sd card! or any other way pls do share!
rom earlier on the phone;
romver: 1.31.621.09
radiover: 1.58.16.27
language: espanol with movistar branding
rom date: 11/02/07
ram: 128mb
rom: 256mb
well looking forward for your help!
wbr
ReyTech.
generally in a flash the rom via a storage card that you have to do step
- Prepare a micro SD card about 2 gb and FAT32 formats.
- Find the image file in NBH format and rename to NIKEIMG.NBH.
- copy to the card, you can use a card reader for this.
- restart the phone in bootloader and press start to launch
Related
:evil:
Hi everyone,
am deperately needing your advice!!!
Just yesterday I rechieved an exchange mdac from tmobile showing serial version v1.02 when put in bootloader mode(previously v1.01).
When trying to flash whatever rom once transferred via ntrw to my sd card, my mdac does simply nothing but stay in bootloader showing serial v1.02. No flashing like in my old one starts.
On removing the sd card it comes out freshly formatted, before it definately was formatted with raw as usual once working with ntrw.
Result : I can not upgrade my system to mksbigstorage or any other rom like i could with my" old one". (same sd card!!!)
Tried downgrading to an older rom version via original upgrade routine and from there flashing via sd card: same problem!, tried other sd card: no solution either!
Any ideas, solutions, people with the same problems?
:?:
Appreciate your help
Thanx
romflashing
Seems to have nothing to do with flashing routine.
Card simply gets formatted once inserted.
Any way to stop this?
Hi! I have had many problems after flashing and re-flashing my rom.
Try boot loader mode and USB then execute (from your PC)MaupgradeUT_noid with a Shipped_rom on XDA ftp. It may work.
Have a look at this link: http://www.mtekk.com.au/forums/viewtopic.php?p=32876
Regards
Try to write SD card with winhex not ntrw. Simply choose open disc feature and write file directly do SD it works every time for me (with ntrw it was roulette). I have 1.02 bootloader
Thanks Shamus but can you explain in details how do you do this with Winhex? my bootloader is 1.00
SPV_M500, ROM 1.12.02 FRE
RADIO 1.12.10
EXTRom no more
Hi guys and gals,
How could I explain my problem...
Let's give it a try!
I have a PDA model Orange SPV1500 (the same machine also comes as Alpine, Qtek 2020i, XDA2i, etc).
Anyway, I decided to upgrade the ROM to get the latest one and to have it in Spanish, as it is my native language...
Apparently, the only way to do this is using a memory card, so I did in the following way:
I used:
The PDA (obviously)
Sd card 256 mb
The actual infor in spanish of how to do it:
http://www.pcdemano.com/phpBB2/viewtopic.php?t=13789
Spanish ROM file from Telefonica: Qtek2020iESN.nb1
romupdate.exe
ntrw.exe
CPART.EXE
MERGE.COM
SPLIT.COM
HEX Editor (HEX WorkShop)
------------------------------
1 - Using Romupdate.exe with the PDA connected to the PC in "bootloader" mode, I 'ask it' to make a copy of the ROM on the SD card (d2s 80000000 3F00000)
2 - I then take the card out of the PDA andI insert it in my card reader. Using CPART.EXE I copy the file in the HD (i.e.: ntrw read ROM.nb1 L
3 - I extract the 3 programs inside the rom file using SPLIT.EXE (split ROM.nb1)
4 - I open one of the 3 files extracted with the hex editor (HEADER.NB1) as well as the updated 'telefonica' ROM I have (Qtek2020iESN.nb1). I put the header from my rom into the telefonica one.
5 - I merge together my new Spanish ROM with the header file I extracted from my PDA with SPLIT.COM (header.nb1 + ext.img + trailer.nb1---->NEWROM.nb1)
6 - I write the new file to the SD card (ntrw write newrom.nb1 L
7 - I insert the SD card into the PDA, put it in "bootloader" mode and follow the on-screen instructions: I press the power button to start the transfer process of the new ROM to the PDA.
8 - It shows an error!!, but it seems to have finished...
9 - I restart it and...
NOTHING!
DEAD!!!
I never saw it move anymore!!
---------------------------------------------
After some research, I think I may have made a mistake when copying/pasting the ROMS
I have compared their sizes and they are 36 bytes different!
- ROM.NB1: 244 MB (255.852.544 bytes)
- NEWROM.NB1:243 MB (255.852.508 bytes)
Does anybody know if they actually have to have the exact same size??
Now I can't (anybody knows how?!) put the PDA back in bootloader more, so I can not put the old ROM back in...
The only way in wchi I manage to get any sign of life is to plug it to the pc or charger and the red charging LED lights up!
There actually seems to be a lot of power consumption! After 6 hours of inserting a full battery, it goes down to 50% (I used another PDA to check it!)
Is there any way to make the PDA go to bootloader mode?! Serial or, anything?!?!
Any suggestions, PLEASE!?!
Does you screen display anything?
Did you keep your original back-up of your ROM (ie. what you flashed to your SD card)?
Justin
weatheryoko said:
Does you screen display anything?
Did you keep your original back-up of your ROM (ie. what you flashed to your SD card)?
Justin
Click to expand...
Click to collapse
I don't see anything on the screen, ANYTHING.
And yes, i keep my original ROM in the SD card and the hard disk
Thanks for your reply,
Mino
Try....
Insert your SD Card and perform a "hard reset". Does this give you the option to "reflash your ROM' with the ROM Image on your SD card?
Re: Try....
weatheryoko said:
Insert your SD Card and perform a "hard reset". Does this give you the option to "reflash your ROM' with the ROM Image on your SD card?
Click to expand...
Click to collapse
This will never give u any options.
You need to put it in bootloader mode(engg mode) and then do a SD card ROM image flashing
kdskamal,
Thanks for the tip. You're right. I haven't done this for a while. I realized my mistake re-reading some posts at www.buzzdev.net.
Mino,
Eject your SD card with your original rom files.
Put your device in bootloader mode by pressing Power button + D-pad simultaneously +reset button with the stylus for 3 seconds
Once you see "Serial 1.XX", insert your SD card with your original ROM image.
You should be able to reflash it at that point.
Justin
That's the question!
I can't put the PDA in bootloader mode! I push power button, etc and the screen continues in black, nothing!
The only solution is to replace the electronic card, therefore you must send it in assistance. About 115€! :?
Hi all,
I have some trouble. I tried to flash new ROM from romkitchen.de, but there was an error on 98%. Now the mda, starts to bootloader (wallaby bootloader v5.15). I don't know what to do now. I found this> http://wiki.xda-developers.com/index.php?pagename=Wallaby_HT_FlashSD , So I cooked rom (NK.nb1) and via osimagetool it wrote to SD (is it same like ctrl c + ctrl v ?). But when mda starts, nothing happens - onlz bootloader starts. What's wrong?
thanks for your answers and sorry for my english
you can check if you did it correct by putting the sd card in the pc
if it's containing a rom the pc cant even read the card
if the card have a rom it should flash automaticly when you enter bootloader
it's incorrect. I don't know how to dwrite rom to sd...What format of ram (.nb1 , .nbf) can be written to sd by osimage?
one choose the sdcard reader as distination
and osi should be able to work with both nb1 and nbf
well...but sd card still can be read in pc. SD i ve god sd reader in my ntb... :/
where did you get the nb1 or nbf ?
only wallaby roms will work
yes, i know it. rom is from romkitchen.de
What for Cardreader are you using? Internal devices often causes problems....
If you have another person that has a wallaby you could backup his rom on the sd-card and install it on your device....
The ROM in nb1 or nbf have to be written via osimagetool. I is written in special format and it is complete different from ctrl + c -> ctrl +v.....
Stefan
i use cardreader in my notebook asus a9n. I'll try it on another pc
help me
i flash my 838pro now can't poweron when i press power key in three
color screen model
i can't remember what version rom i flashed but when process 11% stop
report 262 error use ruu update
now i can see the infomationg in three color model:
herm100
ipl:1.04
spl:2.10.01ipro
what can i do can save my herm 100
orange spv m3100 branded
1st, calm down.....
Now, its good you Hard SPLed your phone. Try upgrading your os with the sd card. None of these communication errors.
1st thing to do is backup your sd card to pc if you havr a card reader. Then format it fat32. Open the installation files, you should see two files, "RUUWrapper.exe" and "RUU_signed.nbh".
copy the RUU_signed.nbh file onto your sd card and rename it to "hermimg.nbh".
Put the card into your hermes and reset. Since it is going into bootloader anyway you won't have to do it manually. This should then upgrade the os. You will be aske to press the power button to update. As long as the rom you were trying to upgrade to before DIDN'T have a radio rom portion you should have no problems with you phone.
All the best, Cheers...
as described above, my HTC HD Mini doesent boot anymore. After the HTC logo, the display remains just black and nothing happens. In the boot menu, I'm still there and says:
PB92100
SPL-1.06.0000
ENGID 0xF
PCBID 0x80
I have tried tried to install standart ROM many times. The installation is always succesfully. But there is no OS! its always the same problem! ithink i can´t write on the NAND. There is NO OS!
ROM install says:
from
Image version:
to
Image Version: 1.36.407.1
According to installation everything goes smoothly, but the phone has no OS, and therefore still does not boot!
It would please me very much if you could help me!
NO FORUM COULD HELP ME FOR NOW!
Sorry 4 my bad english
can noone help me??? i think thats the best xda forum ....
what happens if you try hard reset ?
nothing. same problem.
Try From SD card
Try recover from sd card.
TUTORIAL:
DOWNLOAD ORIGINAL ROM
EXTRACT (with WinRAR) File RUU nbh ...
FORMAT sd card in FAT 32 (as does HD2 2GB SD Sandisk)
COPY FILE to SD CARD
RENAME FILE RUU: PHOTIMG.nbh
SD CARD TO PUT IN THE PHONE
TURN IN BOOTLOADER (volume down + POWER)
VIDEO TO FOLLOW THE INSTRUCTIONS.
ROM (EU ROM) TESTED ON MY PHONE 100%
osmarsilva said:
Try recover from sd card.
TUTORIAL:
DOWNLOAD ORIGINAL ROM
EXTRACT (with WinRAR) File RUU nbh ...
FORMAT sd card in FAT 32 (as does HD2 2GB SD Sandisk)
COPY FILE to SD CARD
RENAME FILE RUU: PHOTIMG.nbh
SD CARD TO PUT IN THE PHONE
TURN IN BOOTLOADER (volume down + POWER)
VIDEO TO FOLLOW THE INSTRUCTIONS.
ROM (EU ROM) TESTED ON MY PHONE 100%
Click to expand...
Click to collapse
It's not cool to copy other people's things and publish as your own. So You bring yourself to the risk that someone might think you're very smart, and someone else that you are a thief. Link to other users post instead of copying it.