Hey everyone.
I figure we could chat on what method you prefer on charging your wizard.
Do you charge always by USB?
Do you only use a wall charger?
A combination of both?
And why? Is there a benefit for using a certain method?
I try to always charge with the wall charger.
I use usb at work - when I need to, but find that it is more of a flash charge, that does not last nearly as long as the wall charger.
Just my 2 cents
Really I heard someone saying charging with a USB saturates the chemicals better?
not sure though.
as with any chemical, the longer the "cure" time, the longer it lasts.
My wall charger charges it too quick and it dies quicker. USB seems to last longer. Also, I have been using a wall plug usb adapter for a long time (the kind you stick into the outlet and plug a usb cord into it) I never had an issue. it wasn't untill i used the original wall charger that I started to have some problems (like I bought a brand new battery and brought it in from the cold (winter) pluged it into my phone; kept my phone off and charged it. apparently the batt got so hot that the plastic covering cracked. the stupid thing was that the batt was not room temp... but I'm afraid my wall charger is deffinately retired. I had the old batt for over 2 years, maybe even 3 and so far it has held up pretty well with usb charging.
Still holds up pretty well if I use usb.
Note: on the wiki they say that the Wizard last about 11hrs on a full charge. that is a blatant lie! I have had it last about 2 days (like the nights I didn't go home) the batt never dropped lower than 30% ever!!! untill I flashed it to a different rom
I posted a fix I think works for me on Merlin's Slim rom 6.1 ver2
It consists of registry settings and and a cab file that should adress your power issues. have fun lookins
I like charging with charge
It takes longer time to charge by usb than using wall charegr
shadezero said:
Hey everyone.
I figure we could chat on what method you prefer on charging your wizard.
Do you charge always by USB?
Do you only use a wall charger?
A combination of both?
And why? Is there a benefit for using a certain method?
Click to expand...
Click to collapse
i charge it overnight with the wall charger.
however, since i have started to play on it at work, i bought a wind up usb cable, hacked the wires inside to only leave the power connections, and i bring that to work to recharge it on the computer. call me paranoid, but since the tech support guys jump in and mess with the computer remotely i dont want any chance of them digging thru my phone
and if i have to have to charge it in the car, i have an old fm transmitter you can plug a flash drive into and it will play mp3s...so i plug my phone in there instead and viola el cheapo car usb charger
What lasts longer?
Totally stock (but i don't think it matters).
Plug the phone in, orange LED comes on.
Hold it or place in on the counter five seconds later, LED is off.
Had the phone since 6/4.
Anyone else having issues?
Are you using the AC charger ? I have two Evos and one of the chargers does what you are describing. The orange LED comes on and then goes off after a while and the phone stops charging. Does it on both phones, the other charger works fine with both usb cables.
Are you using the USB charger with a computer or laptop or plugging straight into the wall with an AC charger?
This does make a difference because if you are charging with a USB + laptop combination you could be suffering from the computer going to sleep and disabling the USB ports power to conserve laptop battery life. If you are having the issue when plugging into the wall, try plugging into a computer and selecting the "Charge Only" option when your USB debug comes up. Once it does this, allow it to charge for a period of time and then turn the phone off, switch to AC power plug and see what happens.
Perhaps you had some kind of over voltage spike on the charger through the AC plug. I could see it possibly tripping something in the phone to stop taking charge to protect the handset.
Also make sure if you do use a laptop, use a USB 2.0 or better port. More power and faster connection. Gotta love it.
Your charger may not be sourcing enough current anymore (for whatever reason). I have seen the exact same behavior with USB car chargers that were only sourcing 100-150mA.
Have you tried plugging the USB cable into a modern desktop PC? (Some laptops have reduced current ports, so a desktop is a safer bet)
Its definitely a current issue. I tried to charge my phone using my bluetooth headset's wall charger, but I got the behavior you are describing. The bluetooth headset's charger just doesnt put out enough current.
Are you using the charger that came with the phone? if so, you may want to exchange the charger...
im having the same problem when i connect it to my desktop, it sees it for about 2 secs n then disappears. My computer at work has no problem seeing the phone. i wonder if i need a driver or something for my usb ports, anyone have any ideas??
tarheelsmj12001 said:
im having the same problem when i connect it to my desktop, it sees it for about 2 secs n then disappears. My computer at work has no problem seeing the phone. i wonder if i need a driver or something for my usb ports, anyone have any ideas??
Click to expand...
Click to collapse
Probably not a driver issue, but that that rail from the power supply is either undervolted (say 4.6V instead of 5V), or can't provide enough current (amperage) or both. If I recall correctly, the Evo needs 5V @ 1A (+/- 3% tolerance).
Phone not charging
my phone has been charging fine since I got it... even been using the night desk clock app while sleeping at night for the alarm with it plugged in... everything was good...
With my phone about to die today, I plug it in to the wall charger, the led/batter indicator shows that it is charging... then POW.. it says I have a low battery and it needs to be plugged in... WTH??? it is plugged in!
The only thing I did today was flash the new boot.img for the cap fix over in Toast's thread...
Weird thing now is that I took my hero battery and put it in my EVO, plugged it into wall charger, and it stays charging... So, I put my EVO battery in my hero, plugged it in, and whola... it's now charging...
Please help as I am baffled.
MILH0U5E said:
The only thing I did today was flash the new boot.img for the cap fix over in Toast's thread...
Click to expand...
Click to collapse
that's your problem right there. that custom kernel is known to have charging issues.
I'm having the same issue with my car charger consistently. Plus my AC charger less consistently. For example, I'll go to bed and plug it in, the next morning I wake up and see the phone is at 80% charge and isn't charging. At some point over night, it gave up. This is with the stock charger too.
Hey guys - I've been dealing with a Tab charging issue for a few days, and finally solved it... but I thought I'd post the problem and solution here in case it can save someone else a load of frustration if they run into the same problem.
From what I've read, we know that the Tab only draws .5A power from a USB socket, but that it draws ~2A from the wall, and that it knows the difference by testing for a short on the TX/RX USB data wires. (Correct me if I'm wrong on the details, but that's the general impression I've gotten.) We also know that the iPhone/iPad/iPod uses a pair of resistors instead (per the USB spec) to determine the current-delivery capability of the source. (I'm no EE, so I'm a little fuzzy on how that works from a technical perspective.)
So to set the stage: I had brought the USB cable for my Tab with me, but had neglected to grab the USB->outlet adapter for the mains. Similarly, a friend who was on vacation with us had forgotten the charging cable for his iPhone. Thinking I was killing two birds with one stone, I bought an aftermarket USB charging cable for the iPhone which had a separate USB->outlet adapter. His iPhone charged swimmingly, and when I charged my Tab overnight (screen off, starting at ~89% charge) using my cable and the aftermarket adapter, it worked flawlessly. No problem, great solution, or so it seemed...
...until I got home. Suddenly, my Tab wouldn't do more than a trickle charge - the same charge it gets when connected to the USB port on my laptop. (I could tell this was the case because of the small red 'x' next to the charging symbol in the battery icon - which I hadn't noticed while on vacation.) A 2.5-hour car trip using Navigator (screen on the whole time), even with the car charger connected, killed the battery completely. No matter what I did - shutting down apps, rebooting the device, resetting every option I could find - I could not get a fast charge to happen. Even leaving the device plugged in overnight resulted in *less* charge than what I started with if I didn't turn the screen off. I called T-mobile, talked to Samsung tech support twice... and all they could offer was to have me send the Tab back for replacement.
I was at a loss. I nearly did a hard reset in frustration, thinking I had screwed something up royally.
Then I saw the resistors in the pictures in this post:
http://forum.xda-developers.com/showthread.php?t=845844&page=3
and something clicked. I had been assuming that the *cables* were the difference between the iPhone and Tab chargers... but there isn't enough room for resistors in the cables! (Well technically, there is, but regardless...) The resistors must live somewhere else... and, I reasoned, that somewhere must be inside the USB->outlet adapter. So I pulled out the 'proper' Samsung adapter, plugged in the Tab, and voilà... a perfect fast charge.
So this is why the Tab won't charge with an iPod (or Sony-Ericsson, as it turns out) mains USB adapter OR USB-port car charger: the circuitry to let the device know it's capable of a full 2A delivery doesn't live in the Samsung cables; it's only present in the adapter. If that's not there, the device thinks it's connected via USB (and will, in fact, say "USB Connected" every time the charger is plugged in) and won't charge more than a trickle.
So that's my story, and hopefully it can save someone else some pain and frustration. Thanks for giving me the floor.
mattcelt said:
Hey guys - I've been dealing with a Tab charging issue for a few days, and finally solved it... but I thought I'd post the problem and solution here in case it can save someone else a load of frustration if they run into the same problem.
From what I've read, we know that the Tab only draws .5A power from a USB socket, but that it draws ~2A from the wall, and that it knows the difference by testing for a short on the TX/RX USB data wires. (Correct me if I'm wrong on the details, but that's the general impression I've gotten.) We also know that the iPhone/iPad/iPod uses a pair of resistors instead (per the USB spec) to determine the current-delivery capability of the source. (I'm no EE, so I'm a little fuzzy on how that works from a technical perspective.)
So to set the stage: I had brought the USB cable for my Tab with me, but had neglected to grab the USB->outlet adapter for the mains. Similarly, a friend who was on vacation with us had forgotten the charging cable for his iPhone. Thinking I was killing two birds with one stone, I bought an aftermarket USB charging cable for the iPhone which had a separate USB->outlet adapter. His iPhone charged swimmingly, and when I charged my Tab overnight (screen off, starting at ~89% charge) using my cable and the aftermarket adapter, it worked flawlessly. No problem, great solution, or so it seemed...
...until I got home. Suddenly, my Tab wouldn't do more than a trickle charge - the same charge it gets when connected to the USB port on my laptop. (I could tell this was the case because of the small red 'x' next to the charging symbol in the battery icon - which I hadn't noticed while on vacation.) A 2.5-hour car trip using Navigator (screen on the whole time), even with the car charger connected, killed the battery completely. No matter what I did - shutting down apps, rebooting the device, resetting every option I could find - I could not get a fast charge to happen. Even leaving the device plugged in overnight resulted in *less* charge than what I started with if I didn't turn the screen off. I called T-mobile, talked to Samsung tech support twice... and all they could offer was to have me send the Tab back for replacement.
I was at a loss. I nearly did a hard reset in frustration, thinking I had screwed something up royally.
Then I saw the resistors in the pictures in this post:
http://forum.xda-developers.com/showthread.php?t=845844&page=3
and something clicked. I had been assuming that the *cables* were the difference between the iPhone and Tab chargers... but there isn't enough room for resistors in the cables! (Well technically, there is, but regardless...) The resistors must live somewhere else... and, I reasoned, that somewhere must be inside the USB->outlet adapter. So I pulled out the 'proper' Samsung adapter, plugged in the Tab, and voilà... a perfect fast charge.
So this is why the Tab won't charge with an iPod (or Sony-Ericsson, as it turns out) mains USB adapter OR USB-port car charger: the circuitry to let the device know it's capable of a full 2A delivery doesn't live in the Samsung cables; it's only present in the adapter. If that's not there, the device thinks it's connected via USB (and will, in fact, say "USB Connected" every time the charger is plugged in) and won't charge more than a trickle.
So that's my story, and hopefully it can save someone else some pain and frustration. Thanks for giving me the floor.
Click to expand...
Click to collapse
I've recently seen (somewhere) a usb pigtail cable that shorts the pins to make the tab (or any other usb chargable phone) think it's hooked up to a wall charger, rather than a trickle charging usb port.... I need to find that again and just order a few to have in my various cable bags.
If you do find it again, please post it here. Definitely something I'd like in my bag of tricks as well.
Just as an FYI, the 2A charger that came with my Nook Color charges the Tab just fine from mains, even indicates charging. Makes sense, since both devices have a 4000mAH battery.
It's also a nicer unit for travel, it's nicely rounded, the prongs fold into the body of the charger, and you can pick it up from Barnes and Nobles stores just about anywhere in the US. Still doesn't solve the Tab cable issue though.
Croak said:
Still doesn't solve the Tab cable issue though.
Click to expand...
Click to collapse
I'm planning on hacking apart a spare Tab cable so that it goes to a female microUSB; no more multiple cable types then. The stock Tab cable doesn't appear to have more than 6 pins, of which I'm sure a few are grounds.
Someone recently posted a link to the first cheap 3rd-party cables:
http://www.dealextreme.com/details.dx/sku.51931
Get those with a 6' USB extension cable and the Nook charger, and that may be a winning combination. I ordered four the the charging cables yesterday, and I'll try to remember to post whether or not they work out well.
Resonance, what are you planning on using for a car charger, if any? I really like the Navigator app, but it's just not practical if I can't keep the Tab charged while using it.
Does anyone know if there are any USB->12v adapters that have the right circuitry for the Samsung? For that matter, do any other devices use the same amperage detection setup the Tab does? It would be good to know what components are cross-compatible.
Thanks for the info.
How about a list of chargers that work fine on the GTab.
1. Garminfone charger (1amp - works great and I use it as my primary charger)
mattcelt said:
Resonance, what are you planning on using for a car charger, if any? I really like the Navigator app, but it's just not practical if I can't keep the Tab charged while using it.
Click to expand...
Click to collapse
A 12V inverter, attached to the standard wall charger. :/
I bought the Duragadget 12V->USB charger, since it was advertised specifically as a 2A charger for the Galaxy Tab, but it DOES NOT work as advertised (the Tab treats it like a any other low-current USB port, and even offers to mount mass storage, heh).
Using the inverter and the wall charger worked just fine, though it was a bit clunky and unstable (on mine, the prongs aren't tightly gripped, so it bends out of place easily).
Does anyone know if there are any USB->12v adapters that have the right circuitry for the Samsung? For that matter, do any other devices use the same amperage detection setup the Tab does? It would be good to know what components are cross-compatible.
Click to expand...
Click to collapse
I'd been contemplating giving the Duragadget charger with integrated cable a try, but having been burned once by Duragadget, I'm a bit hesitant to do so.
ResonanceZero said:
Someone recently posted a link to the first cheap 3rd-party cables:
http://www.dealextreme.com/details.dx/sku.51931
Get those with a 6' USB extension cable and the Nook charger, and that may be a winning combination. I ordered four the the charging cables yesterday, and I'll try to remember to post whether or not they work out well.
Click to expand...
Click to collapse
OMG...I bought a charger cable from amazon SOLD BY AMAZON marketed as OEM samsung charger and I got the same one in the deal extreme page. WTF...paid $12 for it too.
ResonanceZero said:
A 12V inverter, attached to the standard wall charger. :/
I bought the Duragadget 12V->USB charger, since it was advertised specifically as a 2A charger for the Galaxy Tab, but it DOES NOT work as advertised (the Tab treats it like a any other low-current USB port, and even offers to mount mass storage, heh).
Using the inverter and the wall charger worked just fine, though it was a bit clunky and unstable (on mine, the prongs aren't tightly gripped, so it bends out of place easily).
I'd been contemplating giving the Duragadget charger with integrated cable a try, but having been burned once by Duragadget, I'm a bit hesitant to do so.
Click to expand...
Click to collapse
looks like that car charger is the same as the one you bought with a USB cable included.
nacron said:
looks like that car charger is the same as the one you bought with a USB cable included.
Click to expand...
Click to collapse
Good eyes. I thought it was a different unit with an integrated cable.
Has anyone found a functioning 12v charger?
yes, the verizon store has a 12v charger for the galaxy tab, but that was the only place I was able to find one... other than online.
Hi,
Can anyone else confirm that the Nook charger works for the Tab?
I've tried other high current (2.0+ amp) chargers. Some designed for the ipad and some not, and I always get the trickle charge icon and it's treated as a computer USB connection (Mass storage device options, etc).
How much was the Verizon charger?
Thanks!
stock wall charger works for me.
knowthenazz said:
Hi,
Can anyone else confirm that the Nook charger works for the Tab?
I've tried other high current (2.0+ amp) chargers. Some designed for the ipad and some not, and I always get the trickle charge icon and it's treated as a computer USB connection (Mass storage device options, etc).
How much was the Verizon charger?
Thanks!
Click to expand...
Click to collapse
Google the gobatt 2 charger. It comes with a usb adapter that charges the tab on any charger.
texasreb said:
Google the gobatt 2 charger. It comes with a usb adapter that charges the tab on any charger.
Click to expand...
Click to collapse
Hi,
Thanks for the tip. I can't find much information about the Scosche GoBatt 2 charger, or the adapter that comes with it. Today I tried other Scosche chargers, including their iPad charger, and it didn't seem to work.
Can you give some more details on the adapter that comes with the GoBatt 2?
Thanks!
Got this travel adapter by ZipKord with 2 - 1 amp outlets. Works with the OEM cord and also the Gomadic tip made for the Galaxy Tab. Just need to be careful it's not the older version that only has the lower power outlets. Cheapest I could find was $13+, so if it's less, it's the lower power. With the Gomadic tip and reractable cord, it says it's charging.
EVO 4G 9292 - Travel Adapter By ZipKord
Also this Scosche battery pack seems like it would work. Has 2 - 1 amp USB ports. I ordered one and should get it tomorrow.
Scosche IPDBAT2 Portable Back Up Battery for iPad and iPod
Oops - can't do links. Just search in Amazon. It's where I got both.
Gomadic cord and tips from Gomadic. Love losing the excess clutter (cords).
galaxy tab 7 charging while turned on
can someone explain well how to build the adaptor for charge galaxy tab 7 while it turned on?
is it possible to have a scheme with picture and some photos which describe the work to do?
thanks. and excuse me for bad english.
mattcelt said:
Hey guys - I've been dealing with a Tab charging issue for a few days, and finally solved it... but I thought I'd post the problem and solution here in case it can save someone else a load of frustration if they run into the same problem.
From what I've read, we know that the Tab only draws .5A power from a USB socket, but that it draws ~2A from the wall, and that it knows the difference by testing for a short on the TX/RX USB data wires. (Correct me if I'm wrong on the details, but that's the general impression I've gotten.) We also know that the iPhone/iPad/iPod uses a pair of resistors instead (per the USB spec) to determine the current-delivery capability of the source. (I'm no EE, so I'm a little fuzzy on how that works from a technical perspective.)
So to set the stage: I had brought the USB cable for my Tab with me, but had neglected to grab the USB->outlet adapter for the mains. Similarly, a friend who was on vacation with us had forgotten the charging cable for his iPhone. Thinking I was killing two birds with one stone, I bought an aftermarket USB charging cable for the iPhone which had a separate USB->outlet adapter. His iPhone charged swimmingly, and when I charged my Tab overnight (screen off, starting at ~89% charge) using my cable and the aftermarket adapter, it worked flawlessly. No problem, great solution, or so it seemed...
...until I got home. Suddenly, my Tab wouldn't do more than a trickle charge - the same charge it gets when connected to the USB port on my laptop. (I could tell this was the case because of the small red 'x' next to the charging symbol in the battery icon - which I hadn't noticed while on vacation.) A 2.5-hour car trip using Navigator (screen on the whole time), even with the car charger connected, killed the battery completely. No matter what I did - shutting down apps, rebooting the device, resetting every option I could find - I could not get a fast charge to happen. Even leaving the device plugged in overnight resulted in *less* charge than what I started with if I didn't turn the screen off. I called T-mobile, talked to Samsung tech support twice... and all they could offer was to have me send the Tab back for replacement.
I was at a loss. I nearly did a hard reset in frustration, thinking I had screwed something up royally.
Then I saw the resistors in the pictures in this post:
http://forum.xda-developers.com/showthread.php?t=845844&page=3
and something clicked. I had been assuming that the *cables* were the difference between the iPhone and Tab chargers... but there isn't enough room for resistors in the cables! (Well technically, there is, but regardless...) The resistors must live somewhere else... and, I reasoned, that somewhere must be inside the USB->outlet adapter. So I pulled out the 'proper' Samsung adapter, plugged in the Tab, and voilà... a perfect fast charge.
So this is why the Tab won't charge with an iPod (or Sony-Ericsson, as it turns out) mains USB adapter OR USB-port car charger: the circuitry to let the device know it's capable of a full 2A delivery doesn't live in the Samsung cables; it's only present in the adapter. If that's not there, the device thinks it's connected via USB (and will, in fact, say "USB Connected" every time the charger is plugged in) and won't charge more than a trickle.
So that's my story, and hopefully it can save someone else some pain and frustration. Thanks for giving me the floor.
Click to expand...
Click to collapse
potential solution
found this on youtube, looks like it has great potential:
forum won't let me post url links, but this is the video code in you tube. We're all geeks here (I think) so you know where this goes :
=uPc-ZA3t5aY
hope it helps!
Hello everyone. I just want to start off saying that this is NOT a question about USB charging. I know about the trickle charge/lack of voltage stipulations. This is about the factory A/C adapter and USB cord I got with my transformer.
About 80% of the time I plug in my tablet to the A/C adapter, literally nothing happens. The screen doesn't turn on while in sleep mode like normal, the battery in the bottom corner doesn't change to a little lightning bolt, and most disturbingly, my tablet will not charge. The weirdest part is that it connects to the computer through USB no problem. I can move files and such, but no charging. Any ideas?
the charger construction is marginal at best and may need to be wiggled to get a good connection. also the usb connector an be plugged into the charger incorrectly. remember the usb connectot on the supplied cord does not comply s
with the usb spec. Also chev
ch the country ac side adapter ther are also unreliable
My cable went screwy and now it only trickle charges, regardless of what it's plugged into. I've got an RMA for it, but since I have to send them the cable to get a replacement, I'll have a paperweight for a few days at least.
Are you sure yours isn't trickle charging? There wouldn't be a lightning bolt, but I does charge.....very slowly.
Unplug the AC adapter from the wall for about 20 minutes. Plug it back in. Plug in TF.
Charging now?
unplugging it for a while seems to work better than anything. I'm pretty sure there isn't any trickling going on.
You can also try using the charger for your phone if the plug is a USB type. There have been a lot of problems with these charges documented in other threads.
Unplugging it definitely isn't a solution for me. When it first started happening I could do that and after a little while it would start working properly again, but now, it has charged at normal rates in about 3 weeks. I'm going to send it in with the RMA, but I have no idea what the turn-around time is. I'm going to be without any way to charge for that time, which pisses me off just a little bit.
I went out of town this week and made sure to grab my USB cable, but left the AC adapter at home figuring I'd just charge off my laptop via usb. Apparently not... I also tried plugging the USB cord into my iPhone AC/usb adapter with no luck. The only thing I've found is that when you turn off the Tab and connect to one of these devices, a green battery indicator will pop up showing that it is charging. Well, after about 16 hours, it made it from 15% all the way up to 48%. Does anyone know any way around turning it off to charge or why it is barely charging when it is off?
Jaydawgx7 said:
I went out of town this week and made sure to grab my USB cable, but left the AC adapter at home figuring I'd just charge off my laptop via usb. Apparently not... I also tried plugging the USB cord into my iPhone AC/usb adapter with no luck. The only thing I've found is that when you turn off the Tab and connect to one of these devices, a green battery indicator will pop up showing that it is charging. Well, after about 16 hours, it made it from 15% all the way up to 48%. Does anyone know any way around turning it off to charge or why it is barely charging when it is off?
Click to expand...
Click to collapse
Well seeing as it has a 7000mAh battery, just about any run-of-the-mill USB charger isn't going to cut it. The amperage would have higher as well. Now i would hazard that an iPad charger (10 watts) would probably work just fine vs an iPod charger.
Your laptop's USB port isn't providing enough juice to charge fully. With the screen off it will only trickle charge and very slowly at that.
You'll need at least 5 Volt 2 Amp chargers.
You can also try this:
http://forum.xda-developers.com/showpost.php?p=14890063&postcount=16
Or this:
http://cgi.ebay.com/190522553195?ru...ee-All-Categories&_fvi=1&_rdc=1#ht_3085wt_905
I've ordered both last week but neither have arrived yet. I'll report back.
You need a 5vdc supply that will provide 2A. 10W, not 5w as the previous post said. That adapter on ebay won't help the charge, it just disconnects the data line so it does not change its mode when connected to a computer. There are a lot of power supplies that will work and even more that won't, just made sure it supplies 2a. If you want to charge off your laptop then you will want a Y adapter similar to what is on usb powered hard drives but even then you will need to use 2 usb 2.0 or 3.0 ports and will provably only get 1a out.
Sent from my GT-P7510 using XDA Premium App