I don't know where to post this cause I don't see a section for the huawei m850, but since its basicly a rebranded ideos I thought Idk try here. I tied to flash gingerman v1 to it but when it flashed it changed the version of cwm, now I cant read my backup to flash back. It'll load but its stuck in airplane mode and force closes every 15 secs or so. Is there anyway to flash back to stock, like how Samsung has odin, or to get a copy of the stock rom? Any help anybody can give me would b appreciated, thanks in advance.
Sent from my Huawei Ascend using XDA App
Since huawei m850 is identical to U8120, your best hopes are to copy one of these ROMs on the sd card and flash from recovery mod.
http://forum.xda-developers.com/showthread.php?t=782802
http://forum.xda-developers.com/showthread.php?t=802893
http://forum.xda-developers.com/showthread.php?t=1096075
good luck!
Related
Hi I just bought this phone and im getting very confused with all the instructions everywhere for this phone. So far i've only managed to root it. It's on default Froyo 2.2.1. Im trying to install Frugu (kernel) with the voodoo additions and then onecosmic's ICS. But im so lost with what to do. Used to be easy with the xperia x8. Could someone show me in the right direction?
Go to Sammobile.com and download stock gingerbread rom. Install using Odin. (Instruction can be found on sammobile and xda forum just search). Make sure u have three button recovery mode. After installation via Odin look for a kernel (semaphore or chainfire's kernel)with clockworkmod and flash via Odin.
The remaining steps for installing ics can be found on the various threads.
Hope this helps
Sent from my GT-I9000 using Tapatalk
Check my thread
http://forum.xda-developers.com/showthread.php?t=1142499
i suggest you to flash teamhacksung's port of ICS, i have it and it's awesome! my friend try onecosmic's port and have problems..
ICS is brilliant but if you want reliability and good battery life. Any 2.3.6 rom is good. Especially mintberry Miui. Just an Opinion. I'd explore different custom roms to find the perfect one for you. Btw if any flashing goes wrong and you. Think you have bricked your phone, but download mode is great for sorting it. (power vol down home), thanks.
Sent from my GT-I9000 using xda premium
Thanks for the help agbemenu, but im stuck again. I can't get Fugu or ICS to install in CWM. Whenever I try it cuts out, reboots and then is stuck in a bootloop. So I then have to reflash GB and semaphore to get a working phone again.
EDIT: AntAust1513 The main reason I bought this phone was to try out the ICS roms . Battery isn't much of a concern
EDIT2: I finally got it to work. Turns out I forgot to reset to factory defauls. After this it installed Glitch in ICS, rebooted, installed ICS, rebooted into ICS, asked to reset. Resetted it again then it took about 5 mins and it booted into a working ICS. Thanks for the help guys! =D
EDIT3: No GSM. I did flash the fix provided but I still get no GSM -.-. Any ideas?
EDIT4: Got that working by reflashing Fugu and resetting to factory. Damn its alot to get this working xD
Hi guys... I have just returned to android after joining the other side. My last android device was an htc hero which was rooted and running a custom rom, but that was a very long time ago and android has moved on so much since then. I recently purchased a motorola atrix which was locked to t-mobile uk, I used an unlocking code to use on the o2 network. I then rooted the device. I have looked through the many many posts of how to unlock my bootloader and usually I wouldnt have any issues but many of the download links are down, so I read another method and the more I read the more I doubt myself.
please dont flame me, if somebody could spare a few moments i'd be very grateful...
my device details are as follows...
Model - MB860
Android Version - 2.3.4
system version - 45.31.2MB860.T-Mobile.en.GB
Baseband version - N_01.100.00R
Build number - 4.5.2A-74_OLE-31.2
Also, any good rom suggestions? I drive for a living so I use co-pilot sat nav alot, I also love taking pics and videos, so would like a rom that has working camera and video recording....
thanks again...
I am not certain with what your issues are with following the method in the sticky at the top of this thread. If some download is not working, seach around for the same file. It is all about getting the unlocked bootloader to flash.
AFAIK, the only way to unlock a moto phone is to flash a moto signed unlocked bootloader.
I do wonder if just burning the fuse would do the trick, but do not know either if it can be done or if it works. But I seriously doubt you want to go there.
Sorry guys.... The sticky somehow got linked to my question.... please ignore the sticky!!! I have no idea how that happened.
Ok, I managed to sort everything out... I'm running Nottach Trix4g custom rom.
But I did notice something whilst running rsd lite, I made sure that I followed the instructions exactly, my phone was detected and started to unlock my bootloader, all files extracted and for some reason on the last section my phone rebooted but the operation had not complete on rsd lite. So I tried again with the same thing happening, the device would reboot with no 'UNLOCKED' on the boot screen. After the second time I was alittle worried so checked the phone was working properly and noticed a decrease in performance. I then checked available memory and it was at 78mb free, even after rebooting with 200mb used!!!
Basically I ended up unlocking the bootloader via command prompt and it worked first time, I've made a back up of my stock rom and then went ahead and installed the nottach Trix4g custom rom, this rom has the ramfix as an option during install.
So right now after checking my running services I have 440mb free with 222mb used, does that seem right?
After I installed the new rom I let it settle for around 30mins before using the device.
It seems ok but what do the more experienced users think, have I messed something up?
yup sounds about right thats a good rom too
Sent from my MB860 using Tapatalk
Really happy with the rom too. If i was to change roms would I have to re-apply the ramfix?
thanks for your help.
hope this helped!!
depends if you have bell atrix AT&T atrix or international. all international users have to flsh the ramfix when needed. i have att atrix so i can flash either flaux123 clesmyns or cm9 kernels well depending on the rom. cm9 uses cm9 or flauxes123 kernel and gingerbread uses gb kernels.
oh ok, I see..... im from the uk so I had to flash ramfix. Does that mean that even if I was to flash a stock rom that I'd still have to flash ramfix, or would it be back to normal? I suppose what im trying to say is, using the method I used to unlock my bootloader have I damaged the ram in anyway?
Whats the best ics custom rom available at the moment?
Thanks again....
No by unlocking the boot loader you didn't mess up anything. You just voided your warranty. Now if you were to put stock rom u don't have to flash ram fix. If it boots up and passed the boot logo then you're good. But if it stays stuck on boot logo for more than 2 minutes then logically u need to apply ram fix. U can flash any ATRIX rom. If it gets stuck then u need ram fix. And best ics rom as from right now will be the one from jokerjax.com.
sent from "ATRIX-BEAST" using voice commands.
thanks guys, I really appreciate your help. All seems to be running surprisingly well with the new rom.
now to try cm9.....
Hi!
I have been trying to install a custom rom on my Huawei u8800 (normal), but i have encountered a few problems.
Followed the guides at modaco and on this forum, updated to 2.3 with V100R001C00B136, rooted, installed CWM and then wiped + install form zip, as the guide says. But now i am stuck at the huawei display, have been standby for about 20 min... Whats wrong?
Thanks
u8800 normal
updated with B136 (V100R001C00B136)
Clockworkmode recovery: 5.5.0.4
Rooted with SuperOneClick v.2.3.3
Edit:
I used the wrong official update. As you see above, i used the B136, but the correct one is the one linked below.
Re: [Help] Screwd up installing a rom, now stuck on huawei display
Did you wipe anything before you flashed official 2.3? And is the 2.3 working?
Sent from my Huawei U8800
Not the first time i think, but i tried again, and then i wiped before installing 2.3. And to my surprise, it actually worked. So now i am trying to flash Aurora rom again (crossing fingers). How many minutes should it take? Follow the guides to the detail, so if it dont work now, i dont know...
Btw, it dosent hurt to charge it while it is doing its stuff?
btw 2. The B136 (V100R001C00B136) update is good enough right? I see other have used another version :-s
Thanks
Good :good: I think not more than 15 or 20 minutes. I think it's ok to charge, at least I do that and I don't have problems
I don't know, I used B526.
Changed the thread topic and first post, because now its a new problem. Have at least been 20 min since i installed the zip and rebooted, but still on the loading page (Huawei screen)
I guess the only thing that might be wrong is the official upgrade version? Can't see any other reason for it not to work for me on this second try.
Btw, in the guide it says that you shall disable fast boot, but i cant find it in the settings.
Yes that can be the problem, if you want to try B526, you can get it here
You will not be able to use pink screen with that 2.3.
---------- Post added at 06:29 PM ---------- Previous post was at 06:09 PM ----------
njatja said:
Btw, in the guide it says that you shall disable fast boot, but i cant find it in the settings.
Click to expand...
Click to collapse
Settings -> Applications. There it should be.
Thanks a lot!
Will try with the other 2.3 update =)
But i did look trough settings -> applications, but no fast boot there. Maybe its not on the update version i have, but the other (B526).
Thanks again!
Works!
It works!!
Thanks a lot for your help zazza!
It worked with the update you linked me!
Again, thanks so much!
I have ICS!!! Woohoo! :laugh:
Nice to hear that :thumbup: Hopefully we soon have working cyanogenmod 10.1 (android 4.2.1) for our phone
Sent from my Huawei U8800
Howsit guys, dont know if this is the right section, apologies if it isnt....a year ago or so ,i kinda bricked my fone, it got stuck in a boot loop, so i used RSD lite and flashed a stock rom (JRDNEM_U3_3.4.3-36-1_CHINESE_SIGN_SIGNED_UCAJRDNEMARAB1B80AA03A.0R_PDS03C_USAJRDNFRYORTINT_P011_A013_HWp3_Service1FF.sbf). Awhile ago i installed cm9 (CM9-NIGHTLY-121116-Defy) and noticed it would freeze up occasionally, pictures in gallery would go grey etc. Now i flashed back to stock froyo and then flashed cm10 (SJB-V3.1.7_BY-LM.(27.03-2013)_) , i did everything ,wipe data, the cache but it takes ages to boot up, it freezes up all the time and i have to take out the battery, if i open apps most of the time the fone gets stuck.
I love this rom but there are too many problems with my fone...whats the next best rom? or how can i fix it?
Any help would b appreciated :good:
Thanx
camir22 said:
Howsit guys, dont know if this is the right section, apologies if it isnt....a year ago or so ,i kinda bricked my fone, it got stuck in a boot loop, so i used RSD lite and flashed a stock rom (JRDNEM_U3_3.4.3-36-1_CHINESE_SIGN_SIGNED_UCAJRDNEMARAB1B80AA03A.0R_PDS03C_USAJRDNFRYORTINT_P011_A013_HWp3_Service1FF.sbf). Awhile ago i installed cm9 (CM9-NIGHTLY-121116-Defy) and noticed it would freeze up occasionally, pictures in gallery would go grey etc. Now i flashed back to stock froyo and then flashed cm10 (SJB-V3.1.7_BY-LM.(27.03-2013)_) , i did everything ,wipe data, the cache but it takes ages to boot up, it freezes up all the time and i have to take out the battery, if i open apps most of the time the fone gets stuck.
I love this rom but there are too many problems with my fone...whats the next best rom? or how can i fix it?
Any help would b appreciated :good:
Thanx
Click to expand...
Click to collapse
I would recommend xperia d4.2
Sent from my MB526 using xda premium
Rawwr said:
I would recommend xperia d4.2
Sent from my MB526 using xda premium
Click to expand...
Click to collapse
Where can i download it from????
camir22 said:
Where can i download it from????
Click to expand...
Click to collapse
It's right there in the Development section. http://forum.xda-developers.com/showthread.php?t=2133698
Defy sometimes has these weird problems that can't be explained. Your best bet would be to flash an SBF and wipe everything using stock recovery after flashing (which you might have to do anyways to get out of a common bootloop). Then you can just do the same old 2nd init and flash a new ROM.
Every time i try install a ROM it flashes fine until i try to reboot... Then it gets stuck on the boot logo. I've formatted to EXT4 but im not sure if i did it the right way... Can you guys help me please, i don't want to buy a new phone yet and i need my phone in a few days when we go to the cabin.
Did you flash the stock kitkat ROM using fastboot.
Check this link :
http://forum.xda-developers.com/oneplus-one/general/guide-return-opo-to-100-stock-t2826541
If you didn't then try it.
Once you retrieve back to stock,you can flash a custom recovery. And try any other custom ROMs.
Sent from my A0001 using Tapatalk
Your phone its allready rooted??
Enviado desde mi A0001 mediante Tapatalk
SaneQ said:
Every time i try install a ROM it flashes fine until i try to reboot... Then it gets stuck on the boot logo. I've formatted to EXT4 but im not sure if i did it the right way... Can you guys help me please, i don't want to buy a new phone yet and i need my phone in a few days when we go to the cabin.
Click to expand...
Click to collapse
I think more people will be able to help if you give more information as to what you have tried and also something along the way of the type/version of the custom recovery you have installed etc.