[Q] newbie problems with custom roms defy - Defy Q&A, Help & Troubleshooting

Howsit guys, dont know if this is the right section, apologies if it isnt....a year ago or so ,i kinda bricked my fone, it got stuck in a boot loop, so i used RSD lite and flashed a stock rom (JRDNEM_U3_3.4.3-36-1_CHINESE_SIGN_SIGNED_UCAJRDNEMARAB1B80AA03A.0R_PDS03C_USAJRDNFRYORTINT_P011_A013_HWp3_Service1FF.sbf). Awhile ago i installed cm9 (CM9-NIGHTLY-121116-Defy) and noticed it would freeze up occasionally, pictures in gallery would go grey etc. Now i flashed back to stock froyo and then flashed cm10 (SJB-V3.1.7_BY-LM.(27.03-2013)_) , i did everything ,wipe data, the cache but it takes ages to boot up, it freezes up all the time and i have to take out the battery, if i open apps most of the time the fone gets stuck.
I love this rom but there are too many problems with my fone...whats the next best rom? or how can i fix it?
Any help would b appreciated :good:
Thanx

camir22 said:
Howsit guys, dont know if this is the right section, apologies if it isnt....a year ago or so ,i kinda bricked my fone, it got stuck in a boot loop, so i used RSD lite and flashed a stock rom (JRDNEM_U3_3.4.3-36-1_CHINESE_SIGN_SIGNED_UCAJRDNEMARAB1B80AA03A.0R_PDS03C_USAJRDNFRYORTINT_P011_A013_HWp3_Service1FF.sbf). Awhile ago i installed cm9 (CM9-NIGHTLY-121116-Defy) and noticed it would freeze up occasionally, pictures in gallery would go grey etc. Now i flashed back to stock froyo and then flashed cm10 (SJB-V3.1.7_BY-LM.(27.03-2013)_) , i did everything ,wipe data, the cache but it takes ages to boot up, it freezes up all the time and i have to take out the battery, if i open apps most of the time the fone gets stuck.
I love this rom but there are too many problems with my fone...whats the next best rom? or how can i fix it?
Any help would b appreciated :good:
Thanx
Click to expand...
Click to collapse
I would recommend xperia d4.2
Sent from my MB526 using xda premium

Rawwr said:
I would recommend xperia d4.2
Sent from my MB526 using xda premium
Click to expand...
Click to collapse
Where can i download it from????

camir22 said:
Where can i download it from????
Click to expand...
Click to collapse
It's right there in the Development section. http://forum.xda-developers.com/showthread.php?t=2133698
Defy sometimes has these weird problems that can't be explained. Your best bet would be to flash an SBF and wipe everything using stock recovery after flashing (which you might have to do anyways to get out of a common bootloop). Then you can just do the same old 2nd init and flash a new ROM.

Related

[Q] Help with rom flashing.

Hi I just got my new droid 2 and flashed cm7 2.3.7 onto it. I was sad to find out that the camera doesn't work on this version at all. I was hoping to flash liberty but i don't know if i can just flash it over cm7 or if i have to flash my rom back to stock. Any help or advice would be great!
Thanks,
Albinoman
The lastest version of CM7 has a working camera. It's said not to let the screen lock though with the camera app open or it will FC. Dumb I know, but they are making progess.
Can I just flash the new one over my current one? Do I have to wipe data/cache?
Sent from my DROID2 using xda premium
So ive had my droid R2D2 for about 5 months now, and im just starting to experiment with custom roms. So far ive been trying to use ROM manager, and i used it to install clockwork recovery mod, but it didn't take nearly as long as it seemed to have taken other people to flash. On top of that, no matter what i try whether i try to boot into recovery from ROM manager, or just turn my phone off and then hold the power button with the x hard button on my keyboard, it takes me to a picture of the android guy with an exclamation point, and when i try to hit the search hard button on my keyboard to bring up menu options it doesnt do anything. As for right now im just trying to back up my current stock ROM, but i would eventually like to install a custom rom as well. Any suggestions or highly recommended ROM's either? I was gonna go with cm7 but if there were others someone highly suggested i would like to know about them.
Albinoman said:
Can I just flash the new one over my current one? Do I have to wipe data/cache?
Sent from my DROID2 using xda premium
Click to expand...
Click to collapse
Wipe cache and delvik cache and you can flash over it.
Awesome thanks!
Sent from my DROID2 using xda premium

[Q] CyanogenMod-7.2.0-RC1

Hey all,
couple of quick questions, would very much appreciate an answer.
I'm using MB525, green lens, CyanogenMod-7.1.0-jordan-Quarx, 2.6.32.9-gbc356f0 kernel and would very much like to update to 7.2.0, since it's almost been a year since I flashed the 7.1 and the defy is starting to lag a bit. The question is, do I just flash the zip from recovery and wipe it clean? I don't need to keep anything, except my contacts and I'm planning to use Titanium Backup for that (right?). Will I be able to roll back to the stock ROM? Because I've still got 1 year of warranty left on the device. Other than that, did any of you experience any serious failings of the 7.2.0? Thanks a million.
Install the froyo kernel builds for green lens. cm72 is very fast and stable, no major issues at all.
Download the zip and install through cwm, before that do full wipe. factory reset and wipe dalvik cache. For Contracts why don't you sync them with Google account and is pretty easy, otherwise you can just use export function to sdcard from settings of contacts application, and later you can import back.
Titanium backup is for application backup, not for contacts.
You can always come back to stick froyo for warranty purposes by fishing full sbf of your region. Never ever flash full sbf of higher revisions,2.3+ versions, so you keep downgradability.
Enjoy fishing!
Sent from my MB526 using XDA App
Awesome, thanks! I figured I'll go with euroskanks ROM, "update-cm-7.2.0-RC1-jordan-KANG-signed.03222012-0221.zip", since it might have several fixes that the original RC does not (amirite?). Gonna head out for couple of hours and then go on with the whole ordeal, and report back in case any other noobs come wandering in. Thanks again.
Delete cache install rom and install kernel
Sent from my MB525 using xda app
junesoung said:
Delete cache install rom and install kernel
Sent from my MB525 using xda app
Click to expand...
Click to collapse
woah, what a help you are! rrrrrrrr
HOLY **** it's flying. Didn't even have a chance to overclock it yet (1Gz as before), still at 800hz, however, it's so so snappy I could not be happier. I am not a very reliable source, though, since I only kept my contacts from the previous install, but that is just because I like it fresh, meaning, I didn't have a heart to uninstall the application I haven't been using for a while and now they're gone. Aaaaand got drunk in the meantime, which is how it's supposed to go down, I think! thanks all y'all, hugs n kisses

How to get the latest roms working on 525?

I seem to be having problems with flashing the 2nd boot quarx roms
I do a full data + cache + dalvik wipe, install the rom + gapps, then wipe cache + dalvik and restart the phone..
It boots up and is laggy as hell but it shouldn't be because no one else has such problems.
Do I have to flash a kernel or something? I've never flashed one before and all my previous cm7, cm9, cm10 (not 2nd boot) worked perfectly without it
Any help? I'm still on a very old build and wanna use the current ones but can't seem to get it to work
I'm using a regular green lens 525
Sent from my MB525 using Tapatalk 2
I've been installing these roms on 2nd init.. Do I HAVE to install it on 2nd boot only?
Sent from my MB525 using Tapatalk 2
sixaxis94 said:
I seem to be having problems with flashing the 2nd boot quarx roms
I do a full data + cache + dalvik wipe, install the rom + gapps, then wipe cache + dalvik and restart the phone..
It boots up and is laggy as hell but it shouldn't be because no one else has such problems.
Do I have to flash a kernel or something? I've never flashed one before and all my previous cm7, cm9, cm10 (not 2nd boot) worked perfectly without it
Any help? I'm still on a very old build and wanna use the current ones but can't seem to get it to work
I'm using a regular green lens 525
Sent from my MB525 using Tapatalk 2
Click to expand...
Click to collapse
I can't even get my green lens to boot into any build past 0912... I've had no problem with cm7, cm9 or cm10 until 0924 and later. I'm sorry I can't help but I'm throwing my hat in the ring..
bulbouscorm said:
I can't even get my green lens to boot into any build past 0912... I've had no problem with cm7, cm9 or cm10 until 0924 and later. I'm sorry I can't help but I'm throwing my hat in the ring..
Click to expand...
Click to collapse
Many ppl have/had this problem (me too).
The workaround is flashing another sbf.
Could you gave details of your parent sbf?
sixaxis94 said:
I've been installing these roms on 2nd init.. Do I HAVE to install it on 2nd boot only?
Sent from my MB525 using Tapatalk 2
Click to expand...
Click to collapse
No, 2ndboot is set automatically after flash. And the only thing u should change in bootmenu is vsels. Governor must be interactive - don't change it
Your workaround might be similar as above, especially if u your last stock ROM was froyo 2.2.1
sixaxis94 said:
I seem to be having problems with flashing the 2nd boot quarx roms
I do a full data + cache + dalvik wipe, install the rom + gapps, then wipe cache + dalvik and restart the phone..
It boots up and is laggy as hell but it shouldn't be because no one else has such problems.
Do I have to flash a kernel or something? I've never flashed one before and all my previous cm7, cm9, cm10 (not 2nd boot) worked perfectly without it
Any help? I'm still on a very old build and wanna use the current ones but can't seem to get it to work
I'm using a regular green lens 525
Sent from my MB525 using Tapatalk 2
Click to expand...
Click to collapse
To get rid of the laggs you should also install the kernel update http://quarx2k.ru/cm10-2ndboot-nightly-defy(+)/update_for_18.10_v4.zip after flashing the Nightly from 18th-Oct
Then you should be fine
corrinti said:
Many ppl have/had this problem (me too).
The workaround is flashing another sbf.
Could you gave details of your parent sbf?
No, 2ndboot is set automatically after flash. And the only thing u should change in bootmenu is vsels. Governor must be interactive - don't change it
Your workaround might be similar as above, especially if u your last stock ROM was froyo 2.2.1
Click to expand...
Click to collapse
I've never messed with sbfs before so I have no idea.. Right now I don't even have a pc on me to use rsdlite or anything (traded mine for an ipad, haha)
Is it difficult to flash a new sbf?
Swift2603 said:
To get rid of the laggs you should also install the kernel update http://quarx2k.ru/cm10-2ndboot-nightly-defy(+)/update_for_18.10_v4.zip after flashing the Nightly from 18th-Oct
Then you should be fine
Click to expand...
Click to collapse
I flash this right after I flash the rom right?
A random question, does anyone have this problem: when someone calls, it sometimes takes like 10 seconds for the phone to match the number to an existing contact.. As in, if my mom calls, it shows up her phone number and takes around 10 seconds for "mom" to appear as the caller
Sent from my MB525 using Tapatalk 2
sixaxis94 said:
I've never messed with sbfs before so I have no idea.. Right now I don't even have a pc on me to use rsdlite or anything (traded mine for an ipad, haha)
Is it difficult to flash a new sbf?
I flash this right after I flash the rom right?
Sent from my MB525 using Tapatalk 2
Click to expand...
Click to collapse
Yes flash it right after the ROM.
Flashing an sbf is not difficult, but you will need a PC.
Regarding your random question: It should be fixed in the latest Nightly. I just tried it
Swift2603 said:
Yes flash it right after the ROM.
Flashing an sbf is not difficult, but you will need a PC.
Regarding your random question: It should be fixed in the latest Nightly. I just tried it
Click to expand...
Click to collapse
The only sbf I've heard of is something like 'Nordic deblur'.. Is that what I'm supposed to flash?
And also, is it worth doing all that? I mean, should I just stay with the stuff I have now and wait for a rom that's compatible without the sbf stuff? I don't really have much of a problem since I'm only using my phone for calling, texting and playing music
Regarding the side question, thanks.. It is kinda irritating, but I can live with it
Another side question.. Has epsylon stopped working on the defy permanently?
sixaxis94 said:
The only sbf I've heard of is something like 'Nordic deblur'.. Is that what I'm supposed to flash?
And also, is it worth doing all that? I mean, should I just stay with the stuff I have now and wait for a rom that's compatible without the sbf stuff? I don't really have much of a problem since I'm only using my phone for calling, texting and playing music
Regarding the side question, thanks.. It is kinda irritating, but I can live with it
Another side question.. Has epsylon stopped working on the defy permanently?
Click to expand...
Click to collapse
Well, with a limited usage you can stay with your last built. Don't suppose that newer CM10, at least till any bigger change in the system, will be again compatible with some old kernels.
And no, Epsylon just has temporary other job but probably will be back this year, sooner or later
Ps. Flashing sbf is not difficult, what requires some knowledge or just reading is choosing of a proper sbf file
Another ps. if u don't want now to mess with sbf but need fast, reliable system with great battery why not give a chance to CM7.2?
corrinti said:
Many ppl have/had this problem (me too).
The workaround is flashing another sbf.
Could you gave details of your parent sbf?
Click to expand...
Click to collapse
p3_jordan_umts_jordan-user-2.2.1-3.4.2-107_JDN-4-000000-release-keys-signed-T-Mobile-US.sbf
corrinti said:
And the only thing u should change in bootmenu is vsels. Governor must be interactive - don't change it
Click to expand...
Click to collapse
Why not? I changed it to Smartass without problems. (Now I changed it back to Interactive)
Sent from my flying overclocked Motorola Defy+ MB526 with CyanogenMod 10 and custom kernel using XDA app
I have got defy green lense.
earlier I was on cm7.2 with cm7 froyo kernel. after that cm10-nightlies, then aokp-kayant.
I recently flashed 18/10quarx v4-update as below:
1.data-cache-dalvik wipe
2.flash18/10, then flashv4, then flash gapps.
3.wipe cache-dalvik
4.reboot.
its all working well.
In the above sequence I have noticed many times that if cm10 is not working, first flash cm7.2 with cm7 froyo kernel & then flash cm10, it happened to be working on three defys I know.
also my boot logo is "Google" which I think is related to cm7 froyo kernel.
all these are observations, no technical expertise? do try?
I forgot to mention one thing that on first boot it appeared as if I have stucked on boot loop. after boot animation again on boot logo then again boot animation. but it booted finally.. so have patience.. first boot is different from earlier night lies.
nastys said:
Why not? I changed it to Smartass without problems. (Now I changed it back to Interactive)
Sent from my flying overclocked Motorola Defy+ MB526 with CyanogenMod 10 and custom kernel using XDA app
Click to expand...
Click to collapse
I didn't say you cannot, I meant you shouldn't as the phone will most probably work not so stable or more laggy or will not take your changes into account etc etc
---------- Post added at 09:26 PM ---------- Previous post was at 09:17 PM ----------
bulbouscorm said:
p3_jordan_umts_jordan-user-2.2.1-3.4.2-107_JDN-4-000000-release-keys-signed-T-Mobile-US.sbf
Click to expand...
Click to collapse
This is a standard problem for US T-mobile users. In your case to go past 12/09 build (as even 24/09 could not work for you) flash CEE 2.2.2 build - than you will be able to flash the newest builds and do not lost your warranty if you have one valid
See also here
sasays said:
I have got defy green lense.
earlier I was on cm7.2 with cm7 froyo kernel. after that cm10-nightlies, then aokp-kayant.
I recently flashed 18/10quarx v4-update as below:
1.data-cache-dalvik wipe
2.flash18/10, then flashv4, then flash gapps.
3.wipe cache-dalvik
4.reboot.
its all working well.
In the above sequence I have noticed many times that if cm10 is not working, first flash cm7.2 with cm7 froyo kernel & then flash cm10, it happened to be working on three defys I know.
also my boot logo is "Google" which I think is related to cm7 froyo kernel.
all these are observations, no technical expertise? do try?
I forgot to mention one thing that on first boot it appeared as if I have stucked on boot loop. after boot animation again on boot logo then again boot animation. but it booted finally.. so have patience.. first boot is different from earlier night lies.
Click to expand...
Click to collapse
I'll check it out
Sent from my MB525 using Tapatalk 2
This is a standard problem for US T-mobile users. In your case to go past 12/09 build (as even 24/09 could not work for you) flash CEE 2.2.2 build - than you will be able to flash the newest builds and do not lost your warranty if you have one valid
See also here
Click to expand...
Click to collapse
This worked perfectly. Thank you so much.
sasays said:
I have got defy green lense.
earlier I was on cm7.2 with cm7 froyo kernel. after that cm10-nightlies, then aokp-kayant.
I recently flashed 18/10quarx v4-update as below:
1.data-cache-dalvik wipe
2.flash18/10, then flashv4, then flash gapps.
3.wipe cache-dalvik
4.reboot.
its all working well.
In the above sequence I have noticed many times that if cm10 is not working, first flash cm7.2 with cm7 froyo kernel & then flash cm10, it happened to be working on three defys I know.
also my boot logo is "Google" which I think is related to cm7 froyo kernel.
all these are observations, no technical expertise? do try?
I forgot to mention one thing that on first boot it appeared as if I have stucked on boot loop. after boot animation again on boot logo then again boot animation. but it booted finally.. so have patience.. first boot is different from earlier night lies.
Click to expand...
Click to collapse
I tried this method twice but it's not working :/
I guess I'll have to do that sbf thing sometime.. Crap
Okay so I've managed to get hold of a computer and I've read up on how to flash an sbf but I have a few questions..
1. If I flash a full sbf, will I have to root my phone, put clockwork mod etc again?
2. How do I know what my parent SBF is? I bought my defy in India, if that helps
3. Which SBF should I flash? I saw walter's link to all the stock SBFs but do I have to flash one of those or something else?
Sent from my iPad using Tapatalk HD
sixaxis94 said:
Okay so I've managed to get hold of a computer and I've read up on how to flash an sbf but I have a few questions..
1. If I flash a full sbf, will I have to root my phone, put clockwork mod etc again?
2. How do I know what my parent SBF is? I bought my defy in India, if that helps
3. Which SBF should I flash? I saw walter's link to all the stock SBFs but do I have to flash one of those or something else?
Sent from my iPad using Tapatalk HD
Click to expand...
Click to collapse
So we know you have green lens, now we need your BL version. It is required to find proper sbf file (I'm not sute about Asian sbfs, usually for Europe green lense are BL4).
Thus go to this thread and download BL See and Root tool for use with your PC - as it is Chinese, then see post #309 in this thread how to use it.
And yes, if you flash full sbf then you have to root it with SuperOneClick and install 2ndInit - that's all.
But you can also try to flash directly one of the sbfs from above mentioned thread - you can find there also newest 2nd boot builds in sbf form
corrinti said:
So we know you have green lens, now we need your BL version. It is required to find proper sbf file (I'm not sute about Asian sbfs, usually for Europe green lense are BL4).
Thus go to this thread and download BL See and Root tool for use with your PC - as it is Chinese, then see post #309 in this thread how to use it.
And yes, if you flash full sbf then you have to root it with SuperOneClick and install 2ndInit - that's all.
But you can also try to flash directly one of the sbfs from above mentioned thread - you can find there also newest 2nd boot builds in sbf form
Click to expand...
Click to collapse
Ran it, it says BL version is 4.
I checked the stock SBF page again, and noticed something. My baseband is set to 3.4.3-331 and there are only 2 SBFs with that number ("Taiwan" and "Hong Kong/Taiwan"). Should I flash one of them?
Also, my phone came unlocked. It didn't come with a contract or anything, if that helps

Flashing New Rom (Solved)

Hey guys, I am having trouble flashing a new rom onto my phone. I used to flash my Galaxy S3 almost every day, and for some reason, I am having trouble with the S4. I have rooted it, and installed Team Win Recovery Project v2.5.0.2 and sometimes the Rom will flash and work, like PA worked first time, so did MIUI Rom, but trying Most of the others they either say failed, or... they go through the whole installation process through the Recovery for Android Revolution HD, and then it boot loops, take battery out, put back in and wipe everything and it just stays on the first Samsung Logo and that's it.
Is there something I am missing?
I am wiping eveyrthing as well before I do it.
Any help will be really appretiated
Thanks
skrapi said:
Hey guys, I am having trouble flashing a new rom onto my phone. I used to flash my Galaxy S3 almost every day, and for some reason, I am having trouble with the S4. I have rooted it, and installed Team Win Recovery Project v2.5.0.2 and sometimes the Rom will flash and work, like PA worked first time, so did MIUI Rom, but trying Most of the others they either say failed, or... they go through the whole installation process through the Recovery for Android Revolution HD, and then it boot loops, take battery out, put back in and wipe everything and it just stays on the first Samsung Logo and that's it.
Is there something I am missing?
I am wiping eveyrthing as well before I do it.
Any help will be really appretiated
Thanks
Click to expand...
Click to collapse
Can you please elaborate this situation without any hassle.? Didn't get your properly. Come again.?:cyclops:
Disturbed™ said:
Can you please elaborate this situation without any hassle.? Didn't get your properly. Come again.?:cyclops:
Click to expand...
Click to collapse
My bad lol, in work and was typing fast.
Basically, when I flashed ParanoidAndroid on my phone, and it worked great, then I changed it to MIUI which worked great,
then I decided to Flash Omega Rom, which was fine, but the WIFI doesn't work for me.
So I tried to Flash Android Revolution and it goes through the Installation Process with no problems and goes into Boot Loop, even though I have done a full wipe of the device.
I am in the middle of Flashing Android Revolution now, for the 3rd time, and it has been on 10% installation for 10 minutes. This is all it says at the moment...
===========================
Android Revolution HD by mike1986
===========================
>>>Formatting partitions
(system is unmounted already)
(preload is unmounted already)
-- that's it --
Sorted, thanks anyway.
Just incase someone else is in the same situation,
All I did was take the battery out for 30 minutes or around that time, and just flash the rom, I didn't wipe or anything else, just flashed and done.
For people having Wifi issues, flash a different Kernel like Adam Kernel, that seems to work for me.
skrapi said:
Sorted, thanks anyway.
Just incase someone else is in the same situation,
All I did was take the battery out for 30 minutes or around that time, and just flash the rom, I didn't wipe or anything else, just flashed and done.
For people having Wifi issues, flash a different Kernel like Adam Kernel, that seems to work for me.
Click to expand...
Click to collapse
Good to see that. BTW Can u prefix solved in ur subject?
Sent from my Disturbed™ Galaxy S4
Disturbed™ said:
Good to see that. BTW Can u prefix solved in ur subject?
Sent from my Disturbed™ Galaxy S4
Click to expand...
Click to collapse
Yea sure no problem. How do you do it though? I have had a look but have no idea lol.
skrapi said:
Yea sure no problem. How do you do it though? I have had a look but have no idea lol.
Click to expand...
Click to collapse
Just edit ur first post and select advance edit. Then u can change it.
Or just double click over subject line for this thread in subforum.
Sent from my Disturbed™ Galaxy S4
Disturbed™ said:
Just edit ur first post and select advance edit. Then u can change it.
Or just double click over subject line for this thread in subforum.
Sent from my Disturbed™ Galaxy S4
Click to expand...
Click to collapse
Sweet, cheers mate = )

cant updgrade to 7.0 from 6.xx

hey guys long time lurker, recently my s7 edge crashed, after using default rom, i decided i wanted a custom rom anyway and picked one, installed it correctly everything was working fine for about 2 weeks. crashed, started constant boot loops, so i reinstalled the rom as before, and still constant boot loops.
then i found official roms and put them on instead, anything 7+ didnt work, but when i put on 6.xx it would work, but using samsungs inbuilt to upgrade it would begin to bootloop again.
any help appreciated!
SM-G935FD
australia
Did you try flashing 7.0 rom with the same baseband version of your phone?
Tried many of the available roms. Found one that is working and I will stick with it for now. Still would like to figure out what I did wrong though, and why I can't flash stock 7.xx
stuartroad said:
Tried many of the available roms. Found one that is working and I will stick with it for now. Still would like to figure out what I did wrong though, and why I can't flash stock 7.xx
Click to expand...
Click to collapse
Did you clear cache, data?
ManXXXX said:
Did you clear cache, data?
Click to expand...
Click to collapse
Yep

Categories

Resources