my focus has gone crazy. it keeps beeping like i received a text message. i try to lock the screen and it goes black for 5 seconds, then immediately lights up and dings like i have a text message. from there it dings constantly. there are no pauses, just ding, ding, ding, ding. you get the picture.
battery drains within an hour due to this. i've reseated the battery, restarted, even did the full reset. nothing has changed. i did the nodo update manually before it became available via the xda update about 6 weeks ago.
does anyone know what's going on....has this ever happened to anyone before? i bought the phone in november...can i warranty it or go to att and switch out?
First thing, you have a couple of options. Any product that you buy in an att store has a warranty on it for a year: phones, cases, chargers, anything. Second thing, I can't say that I have or have heard many instances of whats going on with your phone. The easiest way to deal with this is to go to att tell them whats happeneing and tell them you would like a new phone. The other option is to do another full recovery but do it with the diagnosis app; the diagnosis codes are located in the thread in the general section of the focus forum. Another option is to use one of the official roms from the development section and reflash the rom. So, all in all I think you might of had a faulty update manually updating to nodo. Also, I would try updating through zune the official att/micorsoft nodo. The last thing I assume your focus was unlocked. If you flash the official rom from the development section it flashes, I think, to 7004 version and you can unlock your phone again, prevent the unlock to nodo, so on and so on. Good luck
tuffluck said:
my focus has gone crazy. it keeps beeping like i received a text message. i try to lock the screen and it goes black for 5 seconds, then immediately lights up and dings like i have a text message. from there it dings constantly. there are no pauses, just ding, ding, ding, ding. you get the picture.
battery drains within an hour due to this. i've reseated the battery, restarted, even did the full reset. nothing has changed. i did the nodo update manually before it became available via the xda update about 6 weeks ago.
does anyone know what's going on....has this ever happened to anyone before? i bought the phone in november...can i warranty it or go to att and switch out?
Click to expand...
Click to collapse
okay so the problem now is that the device is not being recognized via the usb port. it reads "one of the devices connected via usb has malfunctioned and is not recognized." does anyone know what is going on???
i think before i did a full reset on the phone, it was programmed to tether. when i reset it, would it revert back to tethering or sync with zune? either way it has never been showing as malfunctioning in windows, so something is definitely wrong. should i do a complete reset using the diagnosis app? i don't know how to do that, but might it help?
does anyone know why i am getting "device has malfunctioned" warning?
tuffluck said:
does anyone know why i am getting "device has malfunctioned" warning?
Click to expand...
Click to collapse
Your going to need to put it in download mode and reflash the original firmware you can do that and download all the tools in this thread.
bsbokc said:
Your going to need to put it in download mode and reflash the original firmware you can do that and download all the tools in this thread.
Click to expand...
Click to collapse
And if that doesn't work (might not, considering the USB issue) you will have to go warranty...
okay thanks for the help. i decided to go back to ATT and they replaced it for no charge. it was an easy fix, BUT i tried to buy a new micro sd card from microcenter, and the phone will not recognize it at all. is this pretty normal to happen?
ATT put the memory card from the old phone into the new phone without my permission. obviously it did not work, but i'm wondering if them putting it in the new phone at all might cause the memory slot to go awry and not read any new card?
You have to do a hard reset to initialize the sd card. Once you do this, it's not removable
Sent from my SGH-i917 using XDA Windows Phone 7 App
so i turn the phone off, put the card in, turn the phone on and go into settings and do a hard reset, and then it should be good to go?
tuffluck said:
so i turn the phone off, put the card in, turn the phone on and go into settings and do a hard reset, and then it should be good to go?
Click to expand...
Click to collapse
No, turn on the phone with the 3 buttons method, or read here about all the methods:
With the phone off, hold down the Power button, volume down button, and camera button and when the screen turns on, release power button, then the other 2.
You will be asked to press Win to continue, twice (hard reset).
Related
I have an o2 Exec and frequently have the problem that the screen goes white and I can't see anything. It tends to happen either when I reopen phone after making or receiving a call (I always have the screen facing in when taking or making calls), or when I open the screen to check a message. I get the feeling that it is linked to the phone app. Its done it since I had the phone, and upgrading the firmware hasn't affected it.
I have found that the best way to get it back is to remove the power and put it back in, or just connect it to power. but sometimes i can spend 10 minutes messing around before it comes back.
Has anyone else had this problem, or know what might be causing it? I don't have any extra software installed other than what it comes with.
Try using it without an SD card for a few days, my Wife had the same problem in her Wizard, turns out if she removes the SD card fault goes away. Regards
cpu
it happens to me with cpuxcsalar installed, removed it, all back in business.
do you have this soft installed?
Rip, I don't have any extra software installed which is what makes it so strange. Gooroo, yes I have a 1Gb SD card in, I'll see how I go with out it for a while. Its certainly something I never thought of. Its a big let down though if that is the culprit.
I'll update this after I've done some testing.
Thanks
I hope your SD is under warranty still, mind you they are getting really cheap now anyway. We only discovered the fault after getting the wifes wizard changed under warranty and then finding exactly the same problem with the new one too. Seemed to happen after the device had gone to sleep on its own, then when waking it up she would get a white screen. Most of the time it was battery out to get it back working again. If she pressed the power button to put it to sleep and then woke it up again it worked fine, and if she let the screen go off and then brought it back again before it had gone to suspend it was fine too. Really weird.
Anyway let us know how you get on
Well I've been running for a few days without my SDcard installed and I'm still getting the same problem. It seems to be definitely linked to the phone app. I usually have the Exec open on my desk, then if I make a call and close the lid to use it like a normal phone, when I open it again the screen is white. Normally, connecting the power, then disconecting it again kicks it back into life.
Very strange!
Sounds like you need a replacement under warranty. You have tried the latest rom, you are running next to nothing in the way of additional applications and you have removed your SD card. I guess you can only try a hardware reset to see if the problem is still there, as O2 are going to ask you to do it anyway. If that fails to sort it get it replaced under warranty.
My Nexus one won't turn on. I tried flashing RADIO 32.24.00.22U_4.03.00.21_2 that I downloaded from Modaco.
After it failed to install showing the error message like
"Multiple Radio images"
and a few others I try to reboot it.
when trying to reboot it there showed a picture of a android and a orangish arrow and a box.
Help...I think I bricked it.
Help?
Please?
Can you get into boot loader? Hold down the track ball, then power on, and keep holding down the track ball...
Also, try holding down the "volume down" toggle button while powering on if the track ball method doesn't work...
If both don't do anything but take you to that same screen, let it sit on that screen for a bit, say 10 minutes just in case...
If still nothing, see what happens when you plug your phone into your computer with the data cable, is it recognized? If so, can you get ADB to recognize it?
Jackasaur said:
Help?
Please?
Click to expand...
Click to collapse
can u get to the recovery image? if u can, its not bricked.
well I tried plugging it into the computer, I tried the wall charger, and nothing seems to work. The LED doesn't come on, and the button combination doesn't work. So I think it's dead for good. :C Before everything got screwed All I saw was a box and an arrow pointing at a android. Which I think meant it was unboxing. I then thought it froze so I tried to take the battery out, and after that it didn't turn on anymore. No LED, no recovery, no nothing. :C Quite sad.
Why the f are so many people intent on taking their batteries out while the phone is updating? I'm not saying that led to the bricking...but it probably didn't help.
Jackasaur said:
well I tried plugging it into the computer, I tried the wall charger, and nothing seems to work. The LED doesn't come on, and the button combination doesn't work. So I think it's dead for good. :C Before everything got screwed All I saw was a box and an arrow pointing at a android. Which I think meant it was unboxing. I then thought it froze so I tried to take the battery out, and after that it didn't turn on anymore. No LED, no recovery, no nothing. :C Quite sad.
Click to expand...
Click to collapse
This part takes a few minutes. I am not totally sure what is happening at this point but I'm assuming it's not good to remove battery during this. Mine sat on that screen for a few min and then finished.
Try to boot up with volume down button held. Then use volume arrows to choose recovery and hit power.
uansari1 said:
Why the f are so many people intent on taking their batteries out while the phone is updating? I'm not saying that led to the bricking...but it probably didn't help.
Click to expand...
Click to collapse
Everyone expects everything to be instant these days... "Uh oh! The screen isn't doing anything, it's been at least 20 seconds! I could just wait and leave it for a few minutes like all the guides say to do. Or I could take my battery out...how could that hurt, right?"
For me it took a good 3-4 minutes on the screen with the arrow and the box.
Anyways, if you can't get to the recovery then you might be buying a new N1.
ahh it took like 5 minutes for me, I have to admit I was a little worried since you dont see status bars or anything, but like said, the guides warn for this.
I cant imagine that removing the battery broke it though, he should be able to load a recovery image
I feel sad for him so bumping
Bleh. I'll just have to wait and see. I'll contact HTC.
tomsan84 said:
ahh it took like 5 minutes for me, I have to admit I was a little worried since you dont see status bars or anything, but like said, the guides warn for this.
I cant imagine that removing the battery broke it though, he should be able to load a recovery image
I feel sad for him so bumping
Click to expand...
Click to collapse
If you remove the battery during the period he did, which is when the phone is actually flashing the radio ROM, yes removing the battery can and likely did break it for him. There are 2 ways to brick an Android device, while flashing a radio ROM and while flashing an SPL...
OP, have you tried any of the button combos we have recommended? Have you tried putting your battery in the phone, then without turning it on, putting it on the charger to see if it can charge the battery at least (you said it wasn't even turning on, which is likely because you have a dead battery)... charge the battery first, then try the button combo's we recommended.
And please, when you report back, and not to sound like an ass, do so clearly and systematically (I can't tell from your posts what did or didn't happen, and whether you tried anything we suggested, nor what the current state of the phone is)... so, please use this format to make it clear to us trying to help:
Battery: Charged or Wouldn't Charge (LED will come on if it is charging)
Trackball+Power: Booted into boot loader, yay! or Went to the damn box
Volume down+Power: Booted into fast boot! or Went to the damn box
And remember, you have to hold down the button, either trackball or volume down, then press the power and keep holding down the trackball or volume down until it either goes to boot loader or it goes to the box screen... you might want to even wait for a minute on the box screen(if it goes to that) while holding down the button to make sure it can't get into boot loader...
Okay so I took the battery out, put it back in, and tried charging it. The Battery LED did not come on, so I'm guessing it's not charging.
The Trackball+Power did not work.
The Volume down+Power did not work.
I think I most likely broke it, due to the fact that I took the battery out while it was flashing the radio ROM onto the phone. I kinda did it on a impulse, which is my fault. So do you think it'd be possible if I did contact HTC they'd send me a swap, and not be able to make my phone work or turn on, and everything will go on as if I "broke" it and not unlock it or anything?
Jackasaur said:
Okay so I took the battery out, put it back in, and tried charging it. The Battery LED did not come on, so I'm guessing it's not charging.
The Trackball+Power did not work.
The Volume down+Power did not work.
I think I most likely broke it, due to the fact that I took the battery out while it was flashing the radio ROM onto the phone. I kinda did it on a impulse, which is my fault. So do you think it'd be possible if I did contact HTC they'd send me a swap, and not be able to make my phone work or turn on, and everything will go on as if I "broke" it and not unlock it or anything?
Click to expand...
Click to collapse
It sounds like you have a true brick... disruption of the radio ROM flashing causes lots of bricks, and did so for you.
It is pretty common, at least with T-Mobile with the G1, to call them up and tell them your phone asked you to update, and while updating it froze and won't turn on or charge anymore. Not sure if HTC will handle it the same as T-Mobile did, but if they do they will just send you a new unit, you send the old one back, and you are back up and running... they might ask that you send it to them first, but there is no way for them to test if it was rooted/unlock boot loader if it can't be powered on, so you should be fine.
Sweet. So I called HTC, and they said they'll repair it, but I asked for a swap instead, so I'll be getting one by either Wednesday, or Thursday. Good stuff! I'll tell you all how it goes. :] Now I am stuck with my Nokia N95. Thanks for all your help.
Did you tell them you have an unlocked bootloader?
uansari1 said:
Did you tell them you have an unlocked bootloader?
Click to expand...
Click to collapse
he doesnt have 2 tell em
lightforce said:
he doesnt have 2 tell em
Click to expand...
Click to collapse
Yeah, he doesn't have to tell them... but they don't have to cover his phone either.
If they find out it's unlocked after the fact, they can charge you to repair the phone.
How exactly will they know he unlocked the bootloader if the device cannot even properly turn on, unless htc has other methods of being able to "restore" the phone, then he should be rather ok. Am I not looking into this deeply enough? Can the phone turn on with a new battery or something? Does HTC have alternatives ways of checking?
Eclair~ said:
How exactly will they know he unlocked the bootloader if the device cannot even properly turn on, unless htc has other methods of being able to "restore" the phone, then he should be rather ok. Am I not looking into this deeply enough? Can the phone turn on with a new battery or something?
Click to expand...
Click to collapse
That's my point man.. I don't know. All they have to see is that open padlock and they can deny the claim.
I have just got the HD2 and been using it for a few weeks. Downloaded a few apps (eg HTC rom, BSB tweeks) and all is good. Saw Max Manila and looked like a great idea - checked my manila version 2.5.19211619.0 and downloaded 2.7 SE (checked it's right for my manila) loaded onto phone and it crashed after soft reset. Took battery out and phone doesn't go past first screen (with the red writing bottom left) - Hard reset is the same and now I'm worried!
Any ideas???
sad to say yy sounds like hard reset time.
power off, hold volume up and volume down, tap power keeping volume up and down pressed til the screen comes on and follow the prompts.
it will reset your phone to factory defaults.
never used max manila so I cant help with what the problem might be, but if there is a developers thread for it you might be better asking there.
Thanks for replying samsamuel - I've tried the hard reset and it doesn't work!
Even when I do as you say, I get the white start screen with htc written on it and then several red lines at the bottom right starting R G and D and that's it! It just stay's like that - At this moment I'd pray for a hard reset!!
I'm going to try booting from the sd card but I'm not sure I can get the phone to go into the bootable mode. I've downloaded the HTC rom and extracted the nmh so we'll see.
if your phone is provider locked then that will not work.you need the rom that came on your phone. so if was from uk o2 then you need the o2 uk rom, otherwise it wont work.
No luck! Whilst I've got everything to sort the phone out it won't do anything but load the white first screen no matter which buttons I hold down.
Man this sucks!
Guess there's nothing for it except the bin unless anyone else has any other ideas??
can you get into boot loader?
press and hold vol down(not up this time, just down) tap and release power, keep vol down held. should boot to striped cultures colored screen.
if you can what does it say next to SPL?
Hi Samsamual
Thanks for helping but no, won't go into bootloader either - doesn't respond to any input (even when I conect the usb the charge led doesn't come on!) and just starts with the white screen with the HTC logo and then the red writting appears and it just hangs - left it for 5 mins just to be sure and no change
Looks like I've really messed it up although I have no idea what I did wrong - instal went just like the other things I installed.
Ahh shame. All i can suggest is the original rom sd card method. But it MUST be the propper rom that came on your phone, so if you got it from vodaphone, , , even if it is unlocked, you must use the voda rom.
Also, have a really good read through the pages in teh rom development section. If you can find someone with the exact same issue, you could be one step closer to fixing it.
Brotherskid said:
Thanks for replying samsamuel - I've tried the hard reset and it doesn't work!
Even when I do as you say, I get the white start screen with htc written on it and then several red lines at the bottom right starting R G and D and that's it! It just stay's like that - At this moment I'd pray for a hard reset!!
I'm going to try booting from the sd card but I'm not sure I can get the phone to go into the bootable mode. I've downloaded the HTC rom and extracted the nmh so we'll see.
Click to expand...
Click to collapse
you must tab the power botton for a short time just tab it and leave it with keeping pressing on the volume up and down buttons don't leave them i think it must work with you tell me if it works
Brotherskid said:
...I'm going to try booting from the sd card b
Click to expand...
Click to collapse
When you tried the SD card method did you use a 2GB SD card and was it formatted to FAT32?
WB
Have you tried a boot (all combinations!) without the sd card installed?
Hoss and WB - thanks for the comments
Hoss, I've held the volume buttons for over a minute after powering on - no change
WB, I can't get the phone to go into boot loader screen but thanks for the info for the future. Next time I'll see if I can copy the original rom just in case.
Resigned myself to having a new paper weight on my desk and looking for a new phone - Guess I won't be putting so many programs on my new one....
PA - Thanks for the advice - Yes tried with sd card in/out sim in/out bootloader, hard reset, soft reset and always the same.
In your posts you do not mention where you bought your HD2, and I do not know what country you are in.
From what I have read, it seems that you did not flash any ROMs, nor change your SPL, so if I were you, at this point, rather than accepting a bricked paperweight, why not explore your warranty possibilities?
Contact the place you bought the HD2 (the dealer) and explore your options. Since I do not know which country you are in I will not suggest an HTC service center, but if your country has such a center, at last resort, you might check out that possibility.
Since you apparently had no hardware problems before the manila incident, it would seem that it is a software glitch somehwere.
Good luck with all of this. It must be almost heartbreaking to have this happen with such beautiful hardware.
rlydiard said:
In your posts you do not mention where you bought your HD2, and I do not know what country you are in.
From what I have read, it seems that you did not flash any ROMs, nor change your SPL, so if I were you, at this point, rather than accepting a bricked paperweight, why not explore your warranty possibilities?
Contact the place you bought the HD2 (the dealer) and explore your options. Since I do not know which country you are in I will not suggest an HTC service center, but if your country has such a center, at last resort, you might check out that possibility.
Since you apparently had no hardware problems before the manila incident, it would seem that it is a software glitch somehwere.
Good luck with all of this. It must be almost heartbreaking to have this happen with such beautiful hardware.
Click to expand...
Click to collapse
What's most annoying is it wasn't as if I was doing anything crazy! Max manila is used by many people (from what I've seen in the threads) and I guess I downloaded the wrong one (although naturally I checked and it's the right one). Certainly will curb my using of 3rd party software! As for the warranty, you're right, I can try and see if it can be fixed (bizarrely, that hadn't occured to me - I thought that with no resets working HTC couldn't do anything). Thanks for the tip and I'll let you know how I get on.
Surely your warranty will cover this. Yes, let me (and us) know how all of this goes. You will get your phone back to what you deserve, for sure!
I had the same issue.
Sent mine to HTC and got it back with the comment "Cannot reproduce"
Probably it solved itself when the battery was removed for a couple of days in the mail.
It has now been working for two weeks again.
Fingers crossed.
watnuweer said:
I had the same issue.
Sent mine to HTC and got it back with the comment "Cannot reproduce"
Probably it solved itself when the battery was removed for a couple of days in the mail.
It has now been working for two weeks again.
Fingers crossed.
Click to expand...
Click to collapse
Experential nut I may be, but just wondering if you had the problem after you installed the MAx manila? I wonder now what versions of OS may be causing this problem.
i had something like this with my HTC Diamond... It stopped responding completely when turned on, didn't respond to the usb cable being plugged in (the round ring used to illuminate when charging)
I took the battery out, for about 30 minutes... then left it charging for another 30 minutes - booted up straight away and never did anything like that again
Worth a shot just leaving it without power for awhile, and then just recharging it
Like watnuweer mentioned, "cannot reproduce" probably fixed itself by not having the battery left in for awhile
fakker said:
i had something like this with my HTC Diamond... It stopped responding completely when turned on, didn't respond to the usb cable being plugged in (the round ring used to illuminate when charging)
I took the battery out, for about 30 minutes... then left it charging for another 30 minutes - booted up straight away and never did anything like that again
Worth a shot just leaving it without power for awhile, and then just recharging it
Like watnuweer mentioned, "cannot reproduce" probably fixed itself by not having the battery left in for awhile
Click to expand...
Click to collapse
This is getting more interesting, what do you suppose is the cure of taking out the battery, and then charging? I do not doubt your experience, I am just extremely curious if anyone can explain this phenomena.
On Saturday night i was txting playing beer pong having a good time.
When all of a sudden a black screen came out saying something about how it was goin to restart and reset or something like that and that all my personal info would be gone.
So i did it and once it restarted it just stayed stuck on the boot up screen.
Not thinking twice about it as i was having fun i just put it in my pocket thinking maybe its gonna take a lil longer but then i realized after awhile it was still on that same screen.
I took out the batter turned it on again same thing happened.
I gave up and decided i'd just deal with it the next morning.
Next morning comes its now like around 1-ish crazy party haha
Point is phone is dead i charge it for 30 min? i try turning on and nothing.
So then i boot up pushing both buttons figured i would do a hard reset.
Still nothing!
My friend decides to take me home so i take this time to charge my phone a lil more with his car charger and at first it was charging then out of no where it doesn't charge?
No light?
No boot up?
Nothing?
I take the battery out and back in then plug it into the charger and the light doesn't turn on but my phone just starts vibrating uncontrollably...
This freaks me out so i take the battery out and again same thing.
I took the battery out for a couple minutes then put it back in and it started charging again.
yay!
Oh btw the whole time this happened i was able to get into bootloader mode so i figured it cant be bricked and i can fix it just got to charge it.
I got home battery wasn't that charged but i plugd it in to my computer in bootloader mode hoping it would charge for a bit then i downloaded a new rom and i read it was a good idea to use task29.
Sounded like a great idea to fix my phone.
I got the Repack by ShaDrac and flashed it on my phone.
One strange thing i did notice was that usually when i flash it i see HTC then a progress bar.
This time it was just blank all black but with the progress bar i saw it go all the way to 99% and 100% on my computer it even said successful flash.
But after that it just stayed off?
No reboot ?
NOTHING!
wont charge
wont turn on
no bootloader mode
completely bricked.
im sure the battery is just dead since it wasn't that charged to begin with but i have no way of charging it!
I did a lot of googleing and found no answers i refuse to believe its bricked!
it cant be rite??
If anyone could please help me i would really appreciate it.
Ive only had my HD2 for about a week =[
Oh and it's a T-Mobile US version unlocked.
javydawg said:
On Saturday night i was txting playing beer pong having a good time.
When all of a sudden a black screen came out saying something about how it was goin to restart and reset or something like that and that all my personal info would be gone.
So i did it and once it restarted it just stayed stuck on the boot up screen.
Not thinking twice about it as i was having fun i just put it in my pocket thinking maybe its gonna take a lil longer but then i realized after awhile it was still on that same screen.
I took out the batter turned it on again same thing happened.
I gave up and decided i'd just deal with it the next morning.
Next morning comes its now like around 1-ish crazy party haha
Point is phone is dead i charge it for 30 min? i try turning on and nothing.
So then i boot up pushing both buttons figured i would do a hard reset.
Still nothing!
My friend decides to take me home so i take this time to charge my phone a lil more with his car charger and at first it was charging then out of no where it doesn't charge?
No light?
No boot up?
Nothing?
I take the battery out and back in then plug it into the charger and the light doesn't turn on but my phone just starts vibrating uncontrollably...
This freaks me out so i take the battery out and again same thing.
I took the battery out for a couple minutes then put it back in and it started charging again.
yay!
Oh btw the whole time this happened i was able to get into bootloader mode so i figured it cant be bricked and i can fix it just got to charge it.
I got home battery wasn't that charged but i plugd it in to my computer in bootloader mode hoping it would charge for a bit then i downloaded a new rom and i read it was a good idea to use task29.
Sounded like a great idea to fix my phone.
I got the Repack by ShaDrac and flashed it on my phone.
One strange thing i did notice was that usually when i flash it i see HTC then a progress bar.
This time it was just blank all black but with the progress bar i saw it go all the way to 99% and 100% on my computer it even said successful flash.
But after that it just stayed off?
No reboot ?
NOTHING!
wont charge
wont turn on
no bootloader mode
completely bricked.
im sure the battery is just dead since it wasn't that charged to begin with but i have no way of charging it!
I did a lot of googleing and found no answers i refuse to believe its bricked!
it cant be rite??
If anyone could please help me i would really appreciate it.
Ive only had my HD2 for about a week =[
Oh and it's a T-Mobile US version unlocked.
Click to expand...
Click to collapse
If you have only had it for a week then the best thing is to just take it back to wherever you bought it and ask for a direct replacement as it should still be within the time frame for that.
Sounds like you have done everything possible to bring it back, taking the battery out, hard reset. If it wont turn on, wont go into the bootloader and you cant get an activesync connection then theres not really much more you can do.
Mark.
yea i agree, dont waste time fiddling and trying to bring it back, get round the shop today.
Unfortunately thats not an option as i got it from someone else and then unlocked it since im on at&t. At most i would have to call htc and hope the manufactureres warranty can do something but i highly doubt it.
cant believe this is the end of my HD2
javydawg said:
Unfortunately thats not an option as i got it from someone else and then unlocked it since im on at&t. At most i would have to call htc and hope the manufactureres warranty can do something but i highly doubt it.
cant believe this is the end of my HD2
Click to expand...
Click to collapse
You might try taking the battery out and leaving it out for at least 24 hours. Sometimes that will reset a few things and bring the screen back on but im not guarenteeing anything. Yo uhave nothing to lose at this stage though. You could also try connecting it to your pc via activesync and see if it connects. Even if the screen isnt coming on you might still get a connection which you could use to flash a new rom.
Even getting a replacement battery off ebay very cheaply might sort it out as I have heard of batterys going funny before.
Just a few sugestions.
Mark.
all the phones should (I think) be manufacturer warrantied for the first year, so I bet htc will fix it, though you might have to pay shipping.
dig out your regions htc repair center and get in touch. so long as they can't see the hspl it should be free.(
I dont have HD2 (<--nexus one), but one thing i have noticed with all HTC phones that I've had something similar happen is when i have tired to reboot the phone by turning it off and then trying to turn back on it wont. I would take the battery out and still it will not. I would do the same with the sd card and same but what fixes it is taking the SIM out press the power button few times with no battery and then putting everything back on and it turns on. It happens in a while. Maybe not the same problem but i guess its worth a try if you haven't yet. One more thing I would try is to take the battery out, the sd card and the SIM card out and then plug your phone into the charger and wait a few mins to see if the led or screen would come on. Try the same thing by plugging it to your computer. If computer does make sound and it does detect your phone then it might just a screen related issue which might be the case since you already flash it with a different rom and nothing came on. I know you probably have tried this but you didnt say in your post but have you tried this?
1. With the device turned off, press and hold the VOLUME UP and VOLUME DOWN buttons, then briefly press the POWER button.
2. Continue pressing the VOLUME UP and VOLUME DOWN buttons until you see this message on the screen:
“This operation will delete all your personal data, and reset all settings to the manufacturer default settings. Press VolUp to restore manufacturer defaults, or press other keys to cancel.”
3. Release the VOLUME UP and VOLUME DOWN buttons.
4. Press the VOLUME UP button to perform the hard reset, or press any other button to cancel the reset.
Good luck
I agree with mskip about the 24H thing if you let the internal/backup battery die it could solve a possible brick then by reflashing
also what deanesn said about the HD phones its also true (same prob with G1 and excalibur) sometimes out off nowhere it wont turn on or its just going to give you a black screen... wierd huh!?
important things I wanna know is
what rom where you using? what radio version? what were the last app or apps you installed on your HD2?
anyways from what I've read&done ever since I joined XDA this is the best thing to do in a situation like yours
This is when you get a black screen
1 if its stuck on the boot screen try to do another hard reset
2. if you cant or nothing happeneds try to see if you can acces the bootloader screen
3. if you cant, remove the batterie for like 24H or maybe more so the internal batterie dries out (if you do that make sure that you try to estimate around 50% to 70% before removing the actual batterie for reflashing)
4. then insert the batterie and try to acces the bootloader or hard reset by pressing the key combanations dont try to see if by a miracle chance it would fix the problem (trust me at this point it wont)
5. if it actually DOES bootup find and download THE STOCK ROM FROM TMOBILE
6. HARD reset if nothing then do it agn but before it has a chance to, try to boot up
7. quickly acces the bootloader wipe your phone (task 29 for hd2) and flash the STOCK ROM (not a custom rom. I read somewhere that its always better to go with an official tmo rom)
thats it Ive try many things on my ALMOST bricked situations this are the things Ive done MAYBE IT WONT WORK FOR YOU, one time I thought my excalibur was dead until I left my phone without a batterie for like a weak then later out of nowhere it boots up only on the first tmobile splash screen and I was able to fix it
LOL even tho those steps prob dont apply to you what you can do is call HTC and tell them you have a black screen on your htc DONT TRY AND ACT all smart by telling them you have a brick and you had a custom rom and all of that cause that prob voids your warranty with HTC, from what I've read this one guy told them that his girlfriend was texting and then the phone froze and the she remove the batterie and the screen went black. And he got a replacement
also another one that I read is a guy telling them he was doing an OFFICIAL ROM UPDATE and the phone never turned back on.
hope it helps
Mark:
Thanks, and this is actually my plan lol I used to flash my old motorola rizr all the time even had to testpoint it to bring it back from a complete BRICK! but the one thing i couldnt fix was water damage haha but after a week of having the battery out some how... miraculously it came back
Deanesn:
How is the nexus one? I was gonna get a nexus one or a hd2 but the screen size ended up being the tie breaker although ever since my g1, android has had my heart haha
Ive always hated windows mobile but the hd2 was perfect!
I also agree with what u said, i have seen those symptons before.
But yea thanks on the advice.. sadly... already tried it and nothing.. =/
Tuppaacc:
Thnx thats exactly what im trying to do.
My only problem is my battery is dead and i need to charge it!
Oh i just noticed i forgot to answer ur questions Tuppaacc.
tuppaacc said:
important things I wanna know is
what rom where you using? what radio version? what were the last app or apps you installed on your HD2?
Click to expand...
Click to collapse
I was using Duttys_Leo_Sense_2.5_5.2.21898.5.0.91_2.10_Radio_2.08.50.08.2_HG_V1.7_WWE Rom.
Im not really sure what radio i was using but if i had to guess i would say 2.10 since i dont remember flashing anything else and i heard the best radio was the one the HD2 already came with.
As for the last app installed ummm.... iGo8? not sure either but in total all the apps installed where
My Phone
Marketplace
Facebook
Myspace
iGo8
Aim
Flashlight
Glympse
umm cant think of any other ones. I know i didnt install much just had flashed the rom the night before.
again sorry for skipping your question.
try
try taking sd card out and boot it work for me
Here is what you have to do after I made a mistake and "killed" my US version HD2, but it's back to service.
First of all, you have to be sure the battery has at least 50% left. If the unit is able to charge the battery, leave it charged for a couple of hours.
Second, unplug all the cables from the unit, take the battery and wait for a few seconds, then put the battery back in. Press and hold volume down button and press red (end/power) button once. If everything goes well, you should see a tri-color screen.
Third, plug in the phone and run ROM update again.
WARNING: flashing will erase your personal data.
javydawg said:
Oh i just noticed i forgot to answer ur questions Tuppaacc.
I was using Duttys_Leo_Sense_2.5_5.2.21898.5.0.91_2.10_Radio_2.08.50.08.2_HG_V1.7_WWE Rom.
Im not really sure what radio i was using but if i had to guess i would say 2.10 since i dont remember flashing anything else and i heard the best radio was the one the HD2 already came with.
As for the last app installed ummm.... iGo8? not sure either but in total all the apps installed where
My Phone
Marketplace
Facebook
Myspace
iGo8
Aim
Flashlight
Glympse
umm cant think of any other ones. I know i didnt install much just had flashed the rom the night before.
again sorry for skipping your question.
Click to expand...
Click to collapse
the thing is the phone itself wont charge the battery.
I plug it into the wall and no lights turn on to indicate its charging.
javydawg said:
the thing is the phone itself wont charge the battery.
I plug it into the wall and no lights turn on to indicate its charging.
Click to expand...
Click to collapse
You need to get a desktop charger so you can plug the battery in and make sure its fully charged. I dont think they are available from shops but you can buy them online (ebay) for around a fiver.
http://cgi.ebay.com/Desktop-Battery...&otn=8&po=LVI&ps=63&clkid=9087015918333818927
That one says for the T8585 but im pretty sure they both use exactly the same battery. You might want to check on that though.
Mark.
My goodness, that OP is a real doozie.
That's pretty wild man, although I don't have much input, other than the obvious suggestions that have already been provided for you... I will say that was a worthy read.
Yea thats pretty much my only option I will be buying that desktop charger real sooon and ill get back to the forum with my results.
Cant believe they are so cheap haha
Ive even seen one that comes with an extra OEM battery and charger for under 15 dollars!
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=230460046498
Thnx for all the help and support. =]
U have a Bricked HD2 my friend
i bought the wall charger and it charged the battery but it still wouldnt turn on or go into bootloader mode or do anything!!
=[
..
any luck with un-bricking your HD2?
Seems like OP bought a damaged phone in the first place or something, or something "happened" on the night of the party. Beer got on it, perhaps?
I have a developer unlocked Focus that is currently running 7004. It was dropped in water and I assumed it did not work as all it would give on boot is the connect to PC icon.
Earlier today I was thinking "Hey I should get a second battery" Well I remembered that other 'broken' Focus and I plugged it in. Mistakenly I was holding the camera button as it took a picture and brought me to the camera screen. This allowed me to exit and browse through the phone as normal. Everything worked as normal (Aside from there being no SIM) I could even browse the marketplace.
I decided to test the apps to see if they'd work first Facebook (no good couldn't update stuff even though I was on WiFi) and twitter. After writing a tweet the phone locked up and reverted to the connect to PC screen. Now the hardware buttons do not respond (Back, Home, Search, Camera will focus but won't take picture)
Short version:Now whenever I boot up it goes to the connect to PC screen. If I connect the phone to a PC it just keeps rebooting itself. The hardware buttons do not respond if I do the reset command. (Back, Home, Search, Camera will focus but won't take picture)
Question: Is it possible to fix this issue of infinite boot and have a normal phone again?
Phone specs
Unlocked
ATT Focus
No MicroSD
Version is 7004
If the hardware hasn't been affected you can try a reflash with one of these ROMs. If you can still do that. Plus a hard reset.
From what you have described, I can't tell for sure what is wrong (soft, hard or both). Hopefully none.
The fact that the phone worked, suggests that part of the software is working. The hardware seems ok, so if you're lucky enough the phone might work with a reflash.
What I recommend, before you reflash, considering it was dropped in water, is make really sure it's dry. I hope you removed the battery quick enough as that usually damages the phone if left in, afterwards.
I've heard various methods, and I know 2 that work:
- remove the battery and the cover and find a warm/hotter and dry place (not too hot) and put the phone there, over a towel and in between the phone and the towel, kitchen towel. The idea is to heat the phone slightly. DO NOT use a microwave or a blow dryer or fire. A good example is over an electric blanket, at lowest power (+towel, +paper towel).
- dry rice. immerse the phone completely in dry rice (batt/cover removed) and leave for 24h
So when I flash the device it comes up with a connect to PC screen. However the flash does complete the entire process. Zune then starts running but says restoration fails.
EDIT: I don't think this phone is good to work anymore.
Picture of Zune error: http://imageshack.us/photo/my-images/98/erroron.jpg
Mister Locke said:
So when I flash the device it comes up with a connect to PC screen. However the flash does complete the entire process. Zune then starts running but says restoration fails.
EDIT: I don't think this phone is good to work anymore.
Picture of Zune error: http://imageshack.us/photo/my-images/98/erroron.jpg
Click to expand...
Click to collapse
Did you re-flash the firmware or you only tried to restore from Zune?
The flash process doesn't involve Zune...
I reflashed the phone and then it reboots itself. First with the screen with the red arrow. Which is supposed to happen. Then it reboots itself again and Zune boots up, giving me that error. It then returns to the connect to PC screen once again no matter how many times it is rebooted.
EDIT: Would it matter which AT&T ROM I used to flash it with?
Mister Locke said:
I reflashed the phone and then it reboots itself. First with the screen with the red arrow. Which is supposed to happen. Then it reboots itself again and Zune boots up, giving me that error. It then returns to the connect to PC screen once again no matter how many times it is rebooted.
EDIT: Would it matter which AT&T ROM I used to flash it with?
Click to expand...
Click to collapse
Hmmm.
Here's an Omnia 7 guide, but should apply to the Focus as well (evidently, with Focus ROM/binaries from Samsung-i917-Focus-firmware-UCJK2-ATT-USA.exe)
I suppose you followed it. If that's the case then your hw might be affected...
Yeah I followed that exactly. I'm guessing the hardware is affected and can't be used anymore. Guess the one time I used it was a fluke. XD Oh well. So much for having two Samsung Focuses.
Mister Locke said:
Yeah I followed that exactly. I'm guessing the hardware is affected and can't be used anymore. Guess the one time I used it was a fluke. XD Oh well. So much for having two Samsung Focuses.
Click to expand...
Click to collapse
I think you should ask Heathcliff74 (PM him), maybe the problem is that one of the steps just doesn't complete and maybe there's a way to force that, or there might be more you can try.