Related
One of my favorite things about android is being able to duel-boot os's and playing around with Linux distros ,but ive seen a drop off of them being brought to Android sadly . so im starting this thread in order to get all the duel-boot,chroot boots and all other ones into one place if i forget one please let me now and ill do my best to add it
Note these are not all native boots and i take no responsibility for anything that happens to your device, these are not mine either and the owners should be thanked im just bringing them together :victory:
Native Boots
My favorite and best (in my opinion) are the native boots Starting off is Ubuntu as a native boot
UBUNTU
The original creators in bringing Ubuntu to the Acer a500 first are right here on XDA netham45 and sp3dev The original thread can be found here Here
To start off on booting Ubuntu Natively you're going to need Root obviously and acer recovery installer which can be downloaded from the Android market
for the sake of this tutorial ill go over booting it off the internal storage :laugh:
1.Start by making sure you have 8gigs free of internal storage as this is how big the .rar is unpacked
2. after you download acer recovery installer youll need to flash this recovery Here
3. After that download all 3 of these .rar's onto your pc put them in a folder of there own and extract the first one they should all merge giving you one rootfs File1 File2 File3
4.once you get the rootfs move it to the home directory of your internal storage
5. power off your tab and boot into your recovery using power and volume- and your good to go
6.some tweaks you could do would be
For sound
Code:
usermod -a -G audio <your username here>
For cpu frequency scale
Code:
sudo add-apt-repository ppa:artfwo/ppa
sudo apt-get update
sudo apt-get install indicator-cpufreq
it will appear in you task bar on reboot best set to performance
:laugh:
Backtrack
Ive been told it works the same way but replacing the ubuntu.img with the backtrack.img which you can download from
http://www.backtrack-linux.org/
Cannot confirm this if someone tests it please reply back
BODHI LINUX
Bodhi Linux is another Linux brought to android with the dev being here on XDA apapousek Make sure to look at the original thread and thank it Here
There are to differant builds Alpha1 and Alpha2 ill be going over Alpha2
1.Start off by using gparted or any partitioning tool should work, and partion your micro sdcard make the first one as ext4 and make it at least 1.5gb name it bodhi make your second partition 128mb at least of fat32 format
2.mount the partitions
3.download bodhi Linux from Here
4.Extract the bodhi tarball to the root of your micro sdcard by using the commands
Code:
sudo su
cd /media/bodhi/
tar -jxvf /home/name/bodhi_alpha2.tar.bz2
5.Copy recovery.img to the second partition and flash it using Acer recovery installer from Here
6.Boot into recovery and you should be good to go
7.once booted into bodhi open terminal and type in setupwifi
CHROOT
Not as good in my opinion alot less functionality but there still fun for testing out a Linux distro and require less space without having to sacrifice your recoveryThere basically running a virtual machine on top of android to run a Linux distro all the ones I've tried have been slower so i just tend to stay away from them but feel free too XD
First of all there's a couple of different apps that will help you get it installed hassle free (for the most part)
starting off there's Linux installer standard Here
There's also Complete Linux installer with two donate versions available Here
Manual Method
There's also a more manual way of setting up chroot.
1.Make sure you have a terminal emulator Here 7zip Here and a .img file for a linux distro ill put up backtrack since it seems to work well make sure you get the ARM version of Backtrack And finally Android VNC Here
2.Download the .Img file of your choice in this case Backtrack 5 and extract it once this is done you will get another folder with bt5.img.gz and a whole other bunch files right click on the bt5.img.gz and go to extract here now copy them all into a folder called BT5
3.copy the folder called BT5 to the internal storage of your device it will be around 5gigs
4.Make sure you have Root access and busybox installed
5.Now open up your terminal emulator app and type in
Code:
su
cd/sdcard/BT5
Then hit enter and type in
Code:
sh bootbt
You should see [email protected] if it worked if it did then you can go ahead and use BT5 commands or you can get a gui by typing in.
Code:
tightvncserver -geometry 1280x800
Hit enter then type in
export USER=root
hit enter then
vncpasswd
Now its going to ask you for a password just create any random one and then verify it . After that it will ask you if you want to create a view only password hit n
6.Finally open VNC android you'll have nickname which doesn't matter port which is usually 5901 if that doesn't work try 5902 or 5903 address leave bank and make sure your connected to [email protected] just hit connect and your done one final thing to remember though is when you want to exit you have to go back to terminal and type in exit to shutdown
WINDOWS
WINDOWS95
windows is actually run through an app which emulates it i believe it has little to none drivers instaled and you cant really do much that ive found but its fun to mess around with and show off :laugh: to get this up and running is pretty simple all you have to do is.
1.Download this .rar HERE
2.Extract the folder to get a sdl.apk and a folder called sdcard move both of them to the root of your sdcard
3install the .apk and open it when shutting down though you have shutdown the right way by hiiting shutdown if you dont on reboot youll get a scandisk error
WINDOWS XP
Windows xp is even slower more useless and way more complicated to run BUT its still kinda cool to have
1.First you'll want to download everything you'll need bochs for android from HERE Sdl.zip from HERE Bochs for pc from HERE and Qumu manager for pc HERE. Last thing you will need is a windows xp.iso file not .img but .iso (ide post one but i read somewhere its ilegal to post .iso for windows :/ )
2.Download and install boch's for android on your tablet then move the SDL.zip to the root of your SDcard
3.Install Boch's and Qemu manager onto your pc
4. what you going to need to do is run a virtual machine with the .iso you have so first thing you'll want to do is once you install Boch's for your pc hit the start button then go to all programs and find the Boch's folder inside of that folder there should be a program called Disk image creation tool.
5. Next type in hd then hit enter, after that type in flat then hit enter ten after that its telling you what size you want it to be usually windows xp doesnt need more than 1.5gb so type in 1500 and hit enter then finally type in c.img and hit enter.
6. Now you want to open Qemu, once inside Qemu you want to start a new virtual machine do this by going to the vm tab and click on new virtual machine.
7.you can give it any nickname it doesnt matter just give it one and hit next.
8.Now it wants to know how much ram you want to allocate to this virtual machine 512mb to 1gb is usually fine pick and hit next.
9. Then hit finish now what you want to do is install the .iso to the blank image file but you need to specify what it is so go to the drives tab, click on Harddisk zero.
10.now you have to find the file c.img its usually located in program files/bochs you might have to make sure all files is selected in your file type bar.
11.Select thec.img file and hit ok
12. Now you want to click on your cd-rom that is your windows xp.iso file so browse and find your windows xp.iso and click ok.
13.Now your ready to run your virtual machine just hit the run button (green one) and if everything went alright you should see it start to boot up.
14. Now you'll have some on screen prompts make sure you follow them and choose ntfs file system when it prompts you to. (process will take 30min+ depending on computer speed)
15. Once your installation has been completed and your at the desktop you want to stop virtual machine. click yes end session. (i know right all that time just to spend two seconds in it)
16.Now you want to find the c.img file which is no longer blank and has windows xp installed to it. Usually in program files/bochs copy it then paste it inside the folder called sdl on your sdcard. If there is already a c.img inside of it just overwrite it.
17.okay almost done (i promise ) your going to want to copy all this code
Code:
megs: 256
cpu: count=1, ips=6000000, reset_on_triple_fault=1, ignore_bad_msrs=1
# filename of ROM images
romimage: file=BIOS-bochs-latest
vgaromimage: file=VGABIOS-lgpl-latest
vga: extension=cirrus, update_freq=25
pci: enabled=1, chipset=i440fx, slot1=cirrus
ata0: enabled=1, ioaddr1=0x1f0, ioaddr2=0x3f0, irq=14
ata1: enabled=1, ioaddr1=0x170, ioaddr2=0x370, irq=15
ata0-master: type=disk, path="c.img"
#ata0-slave: type=disk, path="d.img"
#ata1-master: type=disk, mode=vvfat, path=/sdcard/HDD, journal=vvfat.redolog
#type=cdrom, path="CD.ISO", status=inserted
boot: c
config_interface: textconfig
#display_library: x
# other choices: win32 sdl wx carbon amigaos beos macintosh nogui rfb term svga
log: bochsout.txt
sb16: enabled=1
mouse: enabled=1
sb16: wavemode=1, dmatimer=500000
clock: sync=none, time0=1
Now go to your sdcard/and go the sdl folder and find the bochssrc.txt file overwrite everything in that file with the lines of code you just copied
The megs value at the top is how much ram you want to allocate to windows xp
18 Save te text document and your ready to run windows xp just open up bochs on your phone
Miscellaneous
These are all the os's that ive found that have been duel booted but are not worth it or a tutuoriol was never released will update it as i find them.
so far the only one i know of is Armedslack thsnks to hellvy from what i know of its the same way as bodhi linux but using armedslack packages
MAC OS
Im trying to figure out old mac os and newer ones right now ill be righting a tut once i get it figured out
Just adding another distro. I'm running ARMEDslack. You can use BODHI LINUX approach for installation, but use armedslack's Mini root filesystems instead. For me, there's so many stuff i have to do after installation (mainly recompiling apps & libs) and i'm not sure if anyone interesting in Slackware distro this day. So i'm not recommend this distro unless you have too much free time and know how Slackware work
Another thing, is there anyone get nvidia display driver works? i can't see any practical step to get it working, just ac100 display driver unbuntu package. If anyone get it working, pls share xorg.conf to me
Does ext4 partition has to be the first partition or second to boot bodhi because vfat as second partition cannot be recognized by cwm recovery and I cannot copy any files from internal to external sdcard
el.quechon said:
Does ext4 partition has to be the first partition or second to boot bodhi because vfat as second partition cannot be recognized by cwm recovery and I cannot copy any files from internal to external sdcard
Click to expand...
Click to collapse
first and its not meant to be copied you haven to dd it to it sorry you can't just copy it directly i don't think and fat32 is what the second partition needs to be
gears177 said:
first and its not meant to be copied you haven to dd it to it sorry you can't just copy it directly i don't think and fat32 is what the second partition needs to be
Click to expand...
Click to collapse
it booted in to terminal but usb port didnt work so couldnt use keyboard
No need to flash the kernel to recovery partition, use my dualboot bootloader.
It booted ok for me but it wont let me login at all
Sent from my LG-MS695 using Tapatalk 2
I have a couple questions...
How well does Linux(mainly Ubuntu) run on the A500? Like is it smooth and all the various controls work well.
Does the HDMI out work? If so can you extend the desktop through the HDMI out to another screen. Like have two different windows on each screen.
Drewmungus said:
I have a couple questions...
How well does Linux(mainly Ubuntu) run on the A500? Like is it smooth and all the various controls work well.
Does the HDMI out work? If so can you extend the desktop through the HDMI out to another screen. Like have two different windows on each screen.
Click to expand...
Click to collapse
I'm not sure bout hdmi if you do all the tweaks it runs reasonably well but won't run games and still lags when opening huge programs i had it for a couple of months for the most part you can install whatever you want some programs have missing repositories and you would need to create you own but there not that common i used it for compiling c+ as i need the multiwindow to do it but it will most likely crash if you try to update it i updated it to 12.04 successfully but was then having wifi problems you wil need an external usb keynoard to set it up at first when you boot up click on the top right corner and connect to wifi before doing the setup saves you a couple of steps
gears177 said:
I'm not sure bout hdmi if you do all the tweaks it runs reasonably well but won't run games and still lags when opening huge programs i had it for a couple of months for the most part you can install whatever you want some programs have missing repositories and you would need to create you own but there not that common i used it for compiling c+ as i need the multiwindow to do it but it will most likely crash if you try to update it i updated it to 12.04 successfully but was then having wifi problems you wil need an external usb keynoard to set it up at first when you boot up click on the top right corner and connect to wifi before doing the setup saves you a couple of steps
Click to expand...
Click to collapse
gears177 can you tell me how did you fix wifi after upgrading to 12.04, are you using the ubuntu image from netham and while upgrading did you have any trouble with the packages related to plymouth
el.quechon said:
gears177 can you tell me how did you fix wifi after upgrading to 12.04, are you using the ubuntu image from netham and while upgrading did you have any trouble with the packages related to plymouth
Click to expand...
Click to collapse
i never did fix it i tried everything i could think of nthing worked i dont know it seems that its not even turning on your wifi card i dont know maybe mess around in terminal and try to turn it on with wlan0 up or whatnot im not sure maybe if i get some free time ill try again as for updating i did it in small amounts and i didnt update everything im not sure but i did have a couple of errors they might of been related to plymouth
gears177 said:
i never did fix it i tried everything i could think of nthing worked i dont know it seems that its not even turning on your wifi card i dont know maybe mess around in terminal and try to turn it on with wlan0 up or whatnot im not sure maybe if i get some free time ill try again as for updating i did it in small amounts and i didnt update everything im not sure but i did have a couple of errors they might of been related to plymouth
Click to expand...
Click to collapse
Thats it plymouth i dont know why it keeps failing to instAll and i tryed that thousand times upgrading it always break wifi
Sent from my LG-MS695 using Tapatalk 2
el.quechon said:
Thats it plymouth i dont know why it keeps failing to instAll and i tryed that thousand times upgrading it always break wifi
Sent from my LG-MS695 using Tapatalk 2
Click to expand...
Click to collapse
try installing it manually might work
sorry it took so long guys but its finally done for the most part
does netham have a source code for his kernel
el.quechon said:
does netham have a source code for his kernel
Click to expand...
Click to collapse
maybe in the original thread i didnt find one but then again i didnt really look
http://forum.xda-developers.com/showthread.php?t=1158260
Great work man! I am so happy as a huge ubuntu fan to have this tutorial here for my beloved device.
Sent from my A500 using xda app-developers app
Hey guys is there a script like v6supercharger for ubuntu
Sent from my LG-MS695 using Tapatalk 2
lifeofcoding said:
Great work man! I am so happy as a huge ubuntu fan to have this tutorial here for my beloved device.
Sent from my A500 using xda app-developers app
Click to expand...
Click to collapse
Thanks
el.quechon said:
Hey guys is there a script like v6supercharger for ubuntu
Sent from my LG-MS695 using Tapatalk 2
Click to expand...
Click to collapse
I dont believe so someone could always make one....
Backtrack works natively.
If you go on kernel-xp website there is a RTL8187 kernel for chroot which works well. Its based on acer ICS source code
Sent from my Galaxy Nexus using xda premium
Hi,
I was going to install a ROM on my Nexus, so I made a backup and wiped EVERYTHING. Including the SD card so now in clockworkmod
it can not mount the SD card, I cannot mount it to my computer... I am shaking and my hands are cold... I cant flash any rom HELP NOW!!!! ((((
thanks
No need to panic, its a nexus.
can you adb push a ROM zip to your sdcard?
if you can't then you can always flash a factory image with fastboot and you'll be back to normal in no time.
So take a deep breath and chill.
Sent from my Nexus 7 using xda premium
nodstuff said:
No need to panic, its a nexus.
can you adb push a ROM zip to your sdcard?
if you can't then you can always flash a factory image with fastboot and you'll be back to normal in no time.
So take a deep breath and chill.
Sent from my Nexus 7 using xda premium
Click to expand...
Click to collapse
I have a factory image please tell me how'd I do that in fastboot! (only if they had a begging at knees thing)
ok i will write you some step by step functions to follow in order to get yourself a rom onto your device
Info that is Needed!
Do You Already Have ADB functioning on your Computer
If Yes - Skip to Step 2
If No Proceed from Step 1
----STEP 1----
install the ADB drivers for your device
im going to assume you have a windows machine here so the followthrough will be for windows (i use Win7 but it should be the same)
BOOT YOUR DEVICE INTO RECOVERY WHILE PLUGGED INTO YOUR PC BUT DO NOT CLICK ON ANYTHING
1. Download These Google Drivers for Nexus Devices http://www.themoviedb.org/movie/15092-crank-ii-high-voltage
2. extract the folder
3. press the start button
4. right click on "Comptuer" or "My Computer (XP)
5. Click on Manage
6. in the new window press "Device Manager" on the left
you should see in the tree on the right (a device with a yellow exclamation mark ! probably called nexus)
7. right click it and press update driver software
8. press browse my computer for driver software
9. press let me pick from a list of device drivers on my computer
10. press have disk
11. press browse
12. on the new window navigate to the folder you extracted earlier and select the android_winusb.inf
13. press ok
14. there will either be 1 or 2 options to choose - click Android Composite ADB Interface and then press next
15. tick always trust software from google inc. and then install
your device should now have ADB capablilities
Proceed to step 2
----STEP 2----
this will use adb to push a file to your device while it is in recovery mode which you can then flash
1. Download This - http://www.mediafire.com/?50baad8rykng2j0
these are adb & fastboot binaries which will allow your pc to send files to your nexus via ADB
2. extract the downloaded archive to somewhere easy to remember ( i suggest C:\fastboot )
3. rename your downloaded custom rom to rom.zip (for simplicity) and copy it to the extracted directory (the one with adb.exe & fastboot.exe)
4. bring a command prompt to this directory
- in the directory you extracted (c:\fastboot) hold shift and right click in a blank area of the main window
- click "open command window here"
or
- Windows Key & R
- in the new box type cmd then press enter
- type cd c:\fastboot (where c:\fastboot is the directory where you extracted)
now to push it over
5. in the cmd window type adb devices and make sure your device is listed
your should see something like
list of attached devices
XXXXXXXXXXXXXXXX Recovery
where XXXXX is your devices serial number
6. in your cmd window type adb push rom.zip /sdcard/
this will take a while to complete but once it is down go back to your device and try to install a rom as you usually would
you should see the file in your internal memory to install now
^^ I was too slow!
First install the android SDK (Google it) then you need to put fastboot in your path you need to open my computer, system properties, advanced system settings, environment variables button at the bottom, then in the bottom window scroll down til you see find path and edit it and add the path to the android SDK and in particular the platform-tools folder.
So if you download the android SDK to your C drive, the path you will be adding will be like ";C:\android-sdk\platform tools" (note the semi colon at the start, important to separate entries)
Once the path is set up you can use fast boot in cmd just by typing fastboot xxxxx rather than typing C:\android-sdk\platform-tools fastboot xxxxx every time.
So next thing is to extract the images to somewhere.
Inside the zip is another zip called image-nakasi-jzo54k,
unzip that til you have .IMG files, system.img, boot.img etc.
then once they are extracted you use cmd to CD to that folder where you have the images and you can start to flash them.
fastboot flash system system.img
fastboot flash boot boot.img
You could just use flash-all.bat but and that will flash them all automatically but will wipe your internal SD.
Sent from my Nexus 7 using xda premium
If you JUST read that, I figured it out, and if I can flash all the partitons correctly, I will punch the thanks button.
cburk01 said:
yay new problem
Ok, so I unzipped it, extracted the thing inside, but it was it a weird format Windows recognized as "file". So, I added .zip to the end. WinRAR opened it, I saw the files, began to extract when an error popped up about the archive being damaged. WTF.
Click to expand...
Click to collapse
What was the name of the file that you had problems with?
the first one is a .tgz file then .tar but the one with the images inside that is .zip (looking at it now)
use 7-zip instead of winzip
Sent from my Nexus 7 using xda premium
nodstuff said:
What was the name of the file that you had problems with?
the first one is a .tgz file then .tar but the one with the images inside that is .zip (looking at it now)
use 7-zip instead of winzip
Sent from my Nexus 7 using xda premium
Click to expand...
Click to collapse
Now I REALLY DO have a problem. I flashed boot.img, system.img, userdata.img, everything to the right partitons and still have a problem. Boot loop. Sticks on Google logo. Why? I did everything right. I even tried fastboot boot boot.img, no luck. I saw some people having boot loop problems, too on 4.1.2. So now, until you reply, I am going to try a custom kernel. Scratch that I'm using ToolKit to download and install 4.1.1.
If you flashed userdata.img that means your internal SD is wiped.
did you run flash-all.bat that is in the folder?
It would be no harm to do that now since everything is wiped already.
no matter what its still recoverable so don't worry.
Sent from my Nexus 7 using xda premium
nodstuff said:
If you flashed userdata.img that means your internal SD is wiped.
did you run flash-all.bat that is in the folder?
It would be no harm to do that now since everything is wiped already.
no matter what its still recoverable so don't worry.
Sent from my Nexus 7 using xda premium
Click to expand...
Click to collapse
*facepalm* with the SD I already wiped that before I flashed. And I didnt run flashall.bat or what ever its called so I am going in to try that. Ran flashall got some weird radio flashing error so now continuing with ToolKit.
Flash-all.bat just automatically flashes all the images by running one command, it simplifies the process.
It just isn't ideal if you wanna keep your SD contents.
that's why you flash images separately, so you don't flash userdata.img but since you already wiped it then you're good to go.
Sent from my Nexus 7 using xda premium
WOOT!!!!!!!!!!!!!!!!!!!! Although I don't know if my backup will work, my tablet is now booted up into Android 4.1.1. Now I am going to root it, install a ROM, restore my data partition from TWRP, and (hopefully) have what I have been waiting for. A updated, functioning Nexus 7. *mashes thanks button*
Hey, should I update to 4.1.2 THEN root or root on 4.1.1 THEN flash the ROM?
cburk01 said:
WOOT!!!!!!!!!!!!!!!!!!!! Although I don't know if my backup will work, my tablet is now booted up into Android 4.1.1. Now I am going to root it, install a ROM, restore my data partition from TWRP, and (hopefully) have what I have been waiting for. A updated, functioning Nexus 7. *mashes thanks button*
Click to expand...
Click to collapse
Your backup is most likely gone, its stored on the SD card and that is wiped. Unless you have it on your computer, then you are all good.
Glad its back to life and now you know how to fix it if anything goes wrong.
What you learned today is very valuable to know.
It's nearly impossible to kill a nexus device (from a software perspective)
Sent from my Nexus 7 using xda premium
---------- Post added at 12:19 AM ---------- Previous post was at 12:18 AM ----------
cburk01 said:
Hey, should I update to 4.1.2 THEN root or root on 4.1.1 THEN flash the ROM?
Click to expand...
Click to collapse
Update first
Sent from my Nexus 7 using xda premium
Yes, I have my backup on my Macbook (running Windows 7). Thanks for all the useful advice. lol about the Nexus devices are hard to kill thing, I imagined a cockroach. And about the valuable lesson thing, I learned fastboot commands and adb stuff all when I was messing with (then soon after fixing) my HTC EVO 3D. Oh, I love XDA. Thanks again.
-cburk
Guide to making a Raring Ubuntu-core image on a Linux PC/laptop (NOT a virtual machine (VM)) for the purpose of installing it on your TF101.
All credit goes to the time and consideration x3maniac took to assist me with doing this!
OP for Tubutnu by x3maniac
This guide allows you to create a CORE Ubuntu image on your Linux box and then install it using the Tubuntu application for Windows. ***Please note, a CORE image does not contain a GUI. The gnome-core guide in the next link will walk you through the steps of installing the gnome-core GUI after you have made your fresh Raring Ubuntu-Core image.***
http://forum.xda-developers.com/showthread.php?p=37803357
***Why do I want to do this when the OP by x3maniac already has a Raring image for download? This guide is helping you make your own UPDATED image. There are daily builds of Raring and the image in the OP by x3maniac is over 2 months old as of this last update to this post.***
Please note that I am using a stock Ubuntu 12.10 laptop. I believe any variant of Ubuntu on a laptop or PC should work with this guide just fine.
Download the files first and then open Terminal to input our commands.
Download: http://cdimage.ubuntu.com/ubuntu-core/daily/current/raring-core-armhf.tar.gz
(You may optionally choose any date time from the Ubuntu-core folders. Ensure you are using the armhf tar.gz file.
Download (Recommended): https://www.dropbox.com/s/dqn9aa94oeju9kf/modules.tar.gz
Alternate Download: http://goo.im/dev/x3maniac/mod_firm_ext.zip
Alternate Download: http://www.novaspirit.com/downloads/mod_firm_ext.zip
After the downloads are complete, open Terminal and let’s get the image built!
A side note, I did not know that using ~ represented the user folder so if you do great, if not it will help you understand that /home/thomas can be represented using ~. So any subfolders of /home/thomas are included using the ~. I will specify my full paths and you can substitute the directories you wish to use. (Linux is still new to me too, I know enough to be dangerous!)
1. mkdir /home/thomas/images/ubuntu-raring
2. cd /home/thomas/images/ubuntu-raring
3. sudo apt-get install qemu
4. sudo apt-get install qemu-user-static
5. Now type this command: qemu-img create raring.img 200M
a.The Ubuntu Raring core image is approximately 186MB. So you understand at 186MB you only have 14MB available of extra stuff you can put into the image. You can resize up later but never down. You may specify any MB size you wish to use for the image. Experiment later, for now just make it 200M.
6. fdisk raring.img (you will see an error about invalid flag, this is ok, step 7 below is w for write, do proceed to step 7)
7. Type w to quit
8. Determine the file system you want (I used ext4)
a. Now type: mkfs.ext4 raring.img (according to config file of Tubuntu app, the partition is set up as ext3, you can use that as well)
b. A warning that your image is not a block special device (when choosing ext4) hit Y to proceed.
c. From /Ubuntu-raring directory type: mkdir mount
9. Now type: sudo mount –o loop ./raring.img ./mount
10. Now type: cd mount
10a. Now type: ls (you are only listing the mount directory to verify you have the lost+found directory) Go up one directory to /home/thomas/images/ubuntu-raring
11. Now type: cp /home/thomas/Downloads/raring-core-armhf.tar.gz /home/thomas/images/ubuntu-raring
12. Now type: sudo tar xvvf raring-core-armhf.tar.gz –C ./mount (you should not be in the mount directory)
13. Now type: sudo tar xvvf modules.tar.gz -C ./mount (you should not be in the mount directory)
14. sudo cp /usr/bin/qemu-arm-static /home/thomas/images/ubuntu-raring/mount/usr/bin (enter)
15. Now type: sudo chroot mount (if successful you will see /#)
16. Now type: passwd and make a password and confirm it.
17. Now type: exit
18. Now type: sudo umount ./mount
19. You should now be in the /home/thomas/images/ubuntu-raring/ directory. From here use the ls command and see your raring.img file.
20. You will need to copy this file your Windows box and use the Tubuntu installation application OR wheelie and nvflash commands. (Wheelie and nvflash commands are for more advanced users).
21. Click on this link for the next guide: http://forum.xda-developers.com/showthread.php?p=37803357
Hi, I have no problems creating the image and mounting it. But when chrooted:
apt-get update
0% [Working]qemu: Unsupported syscall: 374
Err http://ports.ubuntu.com raring Release.gpg
Something wicked happened resolving 'ports.ubuntu.com:80' (-11 - System error)...
I am on Ubuntu 12.10 64-bit. What could it be? qemu & qemu-user-static installed, qemu-arm-static copied...
Thank you and sorry for my CZ-english
onmail said:
Hi, I have no problems creating the image and mounting it. But when chrooted:
apt-get update
0% [Working]qemu: Unsupported syscall: 374
Err http://ports.ubuntu.com raring Release.gpg
Something wicked happened resolving 'ports.ubuntu.com:80' (-11 - System error)...
I am on Ubuntu 12.10 64-bit. What could it be? qemu & qemu-user-static installed, qemu-arm-static copied...
Thank you and sorry for my CZ-english
Click to expand...
Click to collapse
I need to update my guide. After the image is created on your Linux box you then install it on your tablet using tubuntu application. From the tab is where you run apt get commands. Sorry about that.
Sent from my SGH-T999 using Tapatalk 2
TomTcom said:
I need to update my guide. After the image is created on your Linux box you then install it on your tablet using tubuntu application. From the tab is where you run apt get commands. Sorry about that.
Sent from my SGH-T999 using Tapatalk 2
Click to expand...
Click to collapse
Oh, I see, but I think I will not be able to install apt-utils wpasupplicant if the wlan0 adapter is not working (I mean when wpasupplicant is not installed in the image).
onmail said:
Oh, I see, but I think I will not be able to install apt-utils wpasupplicant if the wlan0 adapter is not working (I mean when wpasupplicant is not installed in the image).
Click to expand...
Click to collapse
Yes you will because the core image has everything you need except the supplicant. You can make your own supplicant or copy from your working dual booted prime image of android. Let me try and update the guide later tonight.
Sent from my SGH-T999 using Tapatalk 2
onmail said:
Oh, I see, but I think I will not be able to install apt-utils wpasupplicant if the wlan0 adapter is not working (I mean when wpasupplicant is not installed in the image).
Click to expand...
Click to collapse
Ok, made several changes to my guide. Here's a couple things to note in case you missed them.
1. This guide helps you make an image of Raring Ubuntu-Core. This means there is no GUI and an additional post I have linked to for installing Gnome-Core (your actual desktop environment) for Raring.
2. After the Raring.img is made, you need to start on the Raring Gnome-Core guide and follow those instructions. That installation takes about 2 hours to download and answer questions because it is such a core install.
3. About the wifi, you will be using x3maniac's Tubuntu Windows installation application and starting from fresh with Prime Android and your new Raring image and if you follow the second guide it will walk you through setting up your wifi (do make sure you boot into Prime Android and set up your wifi first before booting to Raring.
4. Please familiarize yourself with the OP I have linked to for the x3maniac Tubuntu application.
It's not as hard as it may seem. After you do it a few times it's rather quick. Installing gnome-core by yourself is kind of slow and a bit tedious but the purpose of doing this was to have complete control of your image.
Later on if you are brave you can also build your own kernel as well and make changes. See my guide in my xda signature.
Hope this helps, thanks for using my guide. Hit the thanks button a couple of times and I'll make sure you get up and running.
TomTcom said:
Ok, made several changes to my guide. Here's a couple things to note in case you missed them.
1. This guide helps you make an image of Raring Ubuntu-Core. This means there is no GUI and an additional post I have linked to for installing Gnome-Core (your actual desktop environment) for Raring.
2. After the Raring.img is made, you need to start on the Raring Gnome-Core guide and follow those instructions. That installation takes about 2 hours to download and answer questions because it is such a core install.
3. About the wifi, you will be using x3maniac's Tubuntu Windows installation application and starting from fresh with Prime Android and your new Raring image and if you follow the second guide it will walk you through setting up your wifi (do make sure you boot into Prime Android and set up your wifi first before booting to Raring.
4. Please familiarize yourself with the OP I have linked to for the x3maniac Tubuntu application.
It's not as hard as it may seem. After you do it a few times it's rather quick. Installing gnome-core by yourself is kind of slow and a bit tedious but the purpose of doing this was to have complete control of your image.
Later on if you are brave you can also build your own kernel as well and make changes. See my guide in my xda signature.
Hope this helps, thanks for using my guide. Hit the thanks button a couple of times and I'll make sure you get up and running.
Click to expand...
Click to collapse
OK, thanks a lot, I will try. I have been playing with Tubuntu for some weeks and now I just started playing with building the image (and thinking about kernel...). Just now I am on Lubuntu (with xfce4 which I prefer) with 2.6 kernel and I am trying on my son's TF101 Raring with Gnome and 3.1 kernel. I am just thinking about the possibility when one system is "fine tuned" if it would be possible to copy it from one TF to the other one (I mean just the Linux partition).
onmail said:
Hi, I have no problems creating the image and mounting it. But when chrooted:
apt-get update
0% [Working]qemu: Unsupported syscall: 374
Err http://ports.ubuntu.com raring Release.gpg
Something wicked happened resolving 'ports.ubuntu.com:80' (-11 - System error)...
I am on Ubuntu 12.10 64-bit. What could it be? qemu & qemu-user-static installed, qemu-arm-static copied...
Thank you and sorry for my CZ-english
Click to expand...
Click to collapse
Replying to my own post because I must say - sorry, I am ehm an idiot... Because the only problem was - I have not edited the /etc/resolv.conf in the mount/etc directory. So now I can easily apt-get anything in the chroot! So it seems I can easily "prepare" an image with everything inside
onmail said:
Replying to my own post because I must say - sorry, I am ehm an idiot... Because the only problem was - I have not edited the /etc/resolv.conf in the mount/etc directory. So now I can easily apt-get anything in the chroot! So it seems I can easily "prepare" an image with everything inside
Click to expand...
Click to collapse
Did it work? I couldn't not without finding a way to inject VI into the image for editing the file. You can mess with permissions but it ultimately doesn't work from the Linux box.
If you are able to do it without the tab, post the instructions and I'll add it to my OP and give you the credit.
Sent from my SGH-T999 using Tapatalk 2
TomTcom said:
Did it work? I couldn't not without finding a way to inject VI into the image for editing the file. You can mess with permissions but it ultimately doesn't work from the Linux box.
If you are able to do it without the tab, post the instructions and I'll add it to my OP and give you the credit.
Sent from my SGH-T999 using Tapatalk 2
Click to expand...
Click to collapse
It works I am just in the middle of installing xubuntu-desktop... I have made a quick & dirty bash script which will help to set hostname for the new TF101, root password, make a new user with password and add him to sudo group, automatically enable all the deb repos (universe etc.), set cpu freqs in rc.local and install some usefull utils (sudo cpufrequtils bash-completion wpasupplicant nano mc net-tools). And there is a second script you can run on the first run on TF101 which will resize the linux partition to its limit, copy the wpa_supplicant.conf from the android partition and starts wlan0 I will send this to you asap but will test this first. Hope my English is understandable
onmail said:
It works I am just in the middle of installing xubuntu-desktop... I have made a quick & dirty bash script which will help to set hostname for the new TF101, root password, make a new user with password and add him to sudo group, automatically enable all the deb repos (universe etc.), set cpu freqs in rc.local and install some usefull utils (sudo cpufrequtils bash-completion wpasupplicant nano mc net-tools). And there is a second script you can run on the first run on TF101 which will resize the linux partition to its limit, copy the wpa_supplicant.conf from the android partition and starts wlan0 I will send this to you asap but will test this first. Hope my English is understandable
Click to expand...
Click to collapse
Xubuntu on raring is working without any problems. Now I would like to get the nvidia accelerated drivers working. I have tried 2 or 3 3.1 kernels but still without success. Googling for some help on compiling 3.1 kernel.
onmail said:
Xubuntu on raring is working without any problems. Now I would like to get the nvidia accelerated drivers working. I have tried 2 or 3 3.1 kernels but still without success. Googling for some help on compiling 3.1 kernel.
Click to expand...
Click to collapse
Awesome! If you go to the op for x3maniac, you can view his github that has 3.1 kernel source. Take a look and see of it helps.
Sent from my SGH-T999 using Tapatalk 2
TomTcom said:
Awesome! If you go to the op for x3maniac, you can view his github that has 3.1 kernel source. Take a look and see of it helps.
Sent from my SGH-T999 using Tapatalk 2
Click to expand...
Click to collapse
By the way, I have instructions for compiling the 2.6.36 kernel in my xda signature if that helps you.
Sent from my SGH-T999 using Tapatalk 2
TomTcom said:
By the way, I have instructions for compiling the 2.6.36 kernel in my xda signature if that helps you.
Sent from my SGH-T999 using Tapatalk 2
Click to expand...
Click to collapse
Yes, I know, I have already checked that. The 2.6 kernel is ok but I would really like to see the nvidia drivers working...
Had an issue mounting raring.img in step 9, had to run sudo fsck.ext4 "path to file" afterwards it mounted smoothly, dont know why tho.
JoinTheRealms said:
Had an issue mounting raring.img in step 9, had to run sudo fsck.ext4 "path to file" afterwards it mounted smoothly, dont know why tho.
Click to expand...
Click to collapse
Hmmm...did step 8a work ok?
Sent from my SGH-T999 using Tapatalk 2
TomTcom said:
Hmmm...did step 8a work ok?
Sent from my SGH-T999 using Tapatalk 2
Click to expand...
Click to collapse
Afaik it did, gave me the mentioned prompt, and finished without error. Might have something to do with me running a x64 vm ? as i wasnt able to chroot either. Im trying to get this running on my tf300t, but its alot different to installing it on the trusty tf101
Cheers for the guide tho, help me understand the whole process :good:
JoinTheRealms said:
Afaik it did, gave me the mentioned prompt, and finished without error. Might have something to do with me running a x64 vm ? as i wasnt able to chroot either. Im trying to get this running on my tf300t, but its alot different to installing it on the trusty tf101
Cheers for the guide tho, help me understand the whole process :good:
Click to expand...
Click to collapse
I believe our dev x3 mentioned there were differences on a VM so it probably has to do with that.
Glad the guide is helpful. Welcome!
Sent from my SGH-T999 using Tapatalk 2
Nice guide ! I just crated a 13.04 raring img. ( Used VM Kubuntu 12.04 )
Need some updates but nice
And there is a problem with actual release, wpa supplicant is not pre installed and now I'm in the begining of your second guide and cant set up wifi.
I had to download package with chroot, then install with my tab same for nano
Anyway, it's just FYI I dont really need help
Kingzak34 said:
Nice guide ! I just crated a 13.04 raring img. ( Used VM Kubuntu 12.04 )
Need some updates but nice
And there is a problem with actual release, wpa supplicant is not pre installed and now I'm in the begining of your second guide and cant set up wifi.
I had to download package with chroot, then install with my tab, and now it doesnt find iwlan0
Anyway, it's just FYI I dont really need help
Click to expand...
Click to collapse
This guide wasn't designed to use wifi, only to correctly package it for flashing 13.04 directly to the tab. The next guide adds the gui and requires your Android to be set up to copy over the wpa_supplicant file before executing those commands.
Onmail was able to script more changes to the image from "chroot" but I didn't go that far, he was able to get the supplicant and other abilities such as adding to the package better than I did.
Flashing Bootloader/Modem/Recovery etc with Heimdall on Linux
Tested on G930F / G935F
Code:
* I am not responsible for bricked devices
* You are choosing to make these modifications.
Guide for flashing Bootloader & Modem on G935F :
1. Install Heimdall
Ubuntu users can execute the following command in terminal :
sudo apt-get install heimdall-flash heimdall-flash-frontend
Click to expand...
Click to collapse
2. Download the Bootloader & Modem you wish to flash.
3. Remove the .md5 extension (erase .md5 from the name)
4. Decompress the renamed tar files and you will get cm.bin, param.bin,modem.bin & sboot.bin.
5. Place the files in a folder and cd to that folder from terminal . e.g cd Downloads
6. Launch Heimall using :
sudo heimdall-frontend
Click to expand...
Click to collapse
4. Detect device & download device pit
5. Open pit file in heimdall and select partitions CM, Radio, Param and Bootloader specifying location of each file respectively
6. Flash
How do you flash a firmware that's in zip file. .. the same way?? Trying to root sprint s7 with heimdall....
oct01 said:
How do you flash a firmware that's in zip file. .. the same way?? Trying to root sprint s7 with heimdall....
Click to expand...
Click to collapse
Don't do it. Your device has a locked bootloader. This guide is only for G935F.
Thank you
Can I install TWRP this way?
yes, you can install twrp , but its more easy if you use the terminal
Code:
heidmall flash --RECOVERY recovery.img
and it should take less than a minute , all done
Wasted the last 8(!) hours of my life with this crap. Do yourself a favour and just grab a Window$ computer, install Samsung drivers and use the latest Odin -- it took less than 5 min in total.
smoneck said:
Wasted the last 8(!) hours of my life with this crap. Do yourself a favour and just grab a Window$ computer, install Samsung drivers and use the latest Odin -- it took less than 5 min in total.
Click to expand...
Click to collapse
I use Linux for years heimdall v frustratingly hit & miss _ sometimes works sometimes no.pit file printed dodgy USB cables / ports et al one day device recognised next day nothing sadly I have to concur flashing is much easier using Doze and Odin . . .
Heimdall for Linux and mac - this is a program that is used on Linux that's similar to Odin for windows. It is capable of flashing extracted tar firmware AP,CP,CSC,and BL using download mode for Samsung devices.
This is not my program.
Also I am limited to Linux for heimdall so testing Mac I can not do but Instructions to install will also be posted using a link
I am testing how to flash the s7 for others limited to Linux or mac.
Linux install of Heimdall on Linux:
Go to the official website here: http://goo.gl/PQC1RN
Scroll down and click on Download(for Linux)
Click to download the Heimdall version for your Linux version (EX. ubuntu13.04-heimdall_1.4.0-0_amd64.deb will work with 14.04 & 13.04 64bit)
Click and download the frontend if you don't like to work inside the terminal
Open your Downloads folder and click to install the files you downloaded
Remember to open Heimdall as Admin(sudo) so it works correctly
Mac install:
http://rootmygalaxy.net/install-odin-jdoin3-for-mac-osx/
Steps to flashing frimware on linux:
1. open terminal and type sudo heimdall-frontend
2. look for flash tab
3. extract firmware zip to a folder then create 4 more folders named AP,BL,CP,and CSC
4. Rename AP,BL,CP,CSC by removing the .md5 part of the file name leaving only the .tar at the end
5. Extract each tar to its specific folder
6. Under the flash tab look for pit file and click browse, goto CSC folder and click the pit file
7. Now look for add and from the list under partition details choose which file to add then click browse under it should have the file name you are looking for under partition details if unsure what to put, go through each folder you made and keep adding each file
8. then click start
This is capable of flashing the firmware , as in the pictures it shows it works and fails, i am thinking because i am flashing all at once instead of each folder separate, or in the wrong order
there are forums on xda on how to use heimdall more extensivly but im just doing this for the s7 so productive comments are welcomed
Also this is being tested on a sprint version of the s7 g930p that has been flashed to g930u firmware, in the pictures im flashing a firmware i already have installed just incase i mess up
Capable of flashing everything but system.img
miko12312 said:
Capable of flashing everything but system.img
Click to expand...
Click to collapse
Should I give up on using Heimdall to flash my S7 active?
rabbiporkchop said:
Should I give up on using Heimdall to flash my S7 active?
Click to expand...
Click to collapse
Depends if you know how to use , I still haven't but also haven't used it,to flash ,there has been successful attempts at flashing samsung devices , you just need to put it in the correct order I believe but it does work there is a full forum on the program in xda