One of my favorite things about android is being able to duel-boot os's and playing around with Linux distros ,but ive seen a drop off of them being brought to Android sadly . so im starting this thread in order to get all the duel-boot,chroot boots and all other ones into one place if i forget one please let me now and ill do my best to add it
Note these are not all native boots and i take no responsibility for anything that happens to your device, these are not mine either and the owners should be thanked im just bringing them together :victory:
Native Boots
My favorite and best (in my opinion) are the native boots Starting off is Ubuntu as a native boot
UBUNTU
The original creators in bringing Ubuntu to the Acer a500 first are right here on XDA netham45 and sp3dev The original thread can be found here Here
To start off on booting Ubuntu Natively you're going to need Root obviously and acer recovery installer which can be downloaded from the Android market
for the sake of this tutorial ill go over booting it off the internal storage :laugh:
1.Start by making sure you have 8gigs free of internal storage as this is how big the .rar is unpacked
2. after you download acer recovery installer youll need to flash this recovery Here
3. After that download all 3 of these .rar's onto your pc put them in a folder of there own and extract the first one they should all merge giving you one rootfs File1 File2 File3
4.once you get the rootfs move it to the home directory of your internal storage
5. power off your tab and boot into your recovery using power and volume- and your good to go
6.some tweaks you could do would be
For sound
Code:
usermod -a -G audio <your username here>
For cpu frequency scale
Code:
sudo add-apt-repository ppa:artfwo/ppa
sudo apt-get update
sudo apt-get install indicator-cpufreq
it will appear in you task bar on reboot best set to performance
:laugh:
Backtrack
Ive been told it works the same way but replacing the ubuntu.img with the backtrack.img which you can download from
http://www.backtrack-linux.org/
Cannot confirm this if someone tests it please reply back
BODHI LINUX
Bodhi Linux is another Linux brought to android with the dev being here on XDA apapousek Make sure to look at the original thread and thank it Here
There are to differant builds Alpha1 and Alpha2 ill be going over Alpha2
1.Start off by using gparted or any partitioning tool should work, and partion your micro sdcard make the first one as ext4 and make it at least 1.5gb name it bodhi make your second partition 128mb at least of fat32 format
2.mount the partitions
3.download bodhi Linux from Here
4.Extract the bodhi tarball to the root of your micro sdcard by using the commands
Code:
sudo su
cd /media/bodhi/
tar -jxvf /home/name/bodhi_alpha2.tar.bz2
5.Copy recovery.img to the second partition and flash it using Acer recovery installer from Here
6.Boot into recovery and you should be good to go
7.once booted into bodhi open terminal and type in setupwifi
CHROOT
Not as good in my opinion alot less functionality but there still fun for testing out a Linux distro and require less space without having to sacrifice your recoveryThere basically running a virtual machine on top of android to run a Linux distro all the ones I've tried have been slower so i just tend to stay away from them but feel free too XD
First of all there's a couple of different apps that will help you get it installed hassle free (for the most part)
starting off there's Linux installer standard Here
There's also Complete Linux installer with two donate versions available Here
Manual Method
There's also a more manual way of setting up chroot.
1.Make sure you have a terminal emulator Here 7zip Here and a .img file for a linux distro ill put up backtrack since it seems to work well make sure you get the ARM version of Backtrack And finally Android VNC Here
2.Download the .Img file of your choice in this case Backtrack 5 and extract it once this is done you will get another folder with bt5.img.gz and a whole other bunch files right click on the bt5.img.gz and go to extract here now copy them all into a folder called BT5
3.copy the folder called BT5 to the internal storage of your device it will be around 5gigs
4.Make sure you have Root access and busybox installed
5.Now open up your terminal emulator app and type in
Code:
su
cd/sdcard/BT5
Then hit enter and type in
Code:
sh bootbt
You should see [email protected] if it worked if it did then you can go ahead and use BT5 commands or you can get a gui by typing in.
Code:
tightvncserver -geometry 1280x800
Hit enter then type in
export USER=root
hit enter then
vncpasswd
Now its going to ask you for a password just create any random one and then verify it . After that it will ask you if you want to create a view only password hit n
6.Finally open VNC android you'll have nickname which doesn't matter port which is usually 5901 if that doesn't work try 5902 or 5903 address leave bank and make sure your connected to [email protected] just hit connect and your done one final thing to remember though is when you want to exit you have to go back to terminal and type in exit to shutdown
WINDOWS
WINDOWS95
windows is actually run through an app which emulates it i believe it has little to none drivers instaled and you cant really do much that ive found but its fun to mess around with and show off :laugh: to get this up and running is pretty simple all you have to do is.
1.Download this .rar HERE
2.Extract the folder to get a sdl.apk and a folder called sdcard move both of them to the root of your sdcard
3install the .apk and open it when shutting down though you have shutdown the right way by hiiting shutdown if you dont on reboot youll get a scandisk error
WINDOWS XP
Windows xp is even slower more useless and way more complicated to run BUT its still kinda cool to have
1.First you'll want to download everything you'll need bochs for android from HERE Sdl.zip from HERE Bochs for pc from HERE and Qumu manager for pc HERE. Last thing you will need is a windows xp.iso file not .img but .iso (ide post one but i read somewhere its ilegal to post .iso for windows :/ )
2.Download and install boch's for android on your tablet then move the SDL.zip to the root of your SDcard
3.Install Boch's and Qemu manager onto your pc
4. what you going to need to do is run a virtual machine with the .iso you have so first thing you'll want to do is once you install Boch's for your pc hit the start button then go to all programs and find the Boch's folder inside of that folder there should be a program called Disk image creation tool.
5. Next type in hd then hit enter, after that type in flat then hit enter ten after that its telling you what size you want it to be usually windows xp doesnt need more than 1.5gb so type in 1500 and hit enter then finally type in c.img and hit enter.
6. Now you want to open Qemu, once inside Qemu you want to start a new virtual machine do this by going to the vm tab and click on new virtual machine.
7.you can give it any nickname it doesnt matter just give it one and hit next.
8.Now it wants to know how much ram you want to allocate to this virtual machine 512mb to 1gb is usually fine pick and hit next.
9. Then hit finish now what you want to do is install the .iso to the blank image file but you need to specify what it is so go to the drives tab, click on Harddisk zero.
10.now you have to find the file c.img its usually located in program files/bochs you might have to make sure all files is selected in your file type bar.
11.Select thec.img file and hit ok
12. Now you want to click on your cd-rom that is your windows xp.iso file so browse and find your windows xp.iso and click ok.
13.Now your ready to run your virtual machine just hit the run button (green one) and if everything went alright you should see it start to boot up.
14. Now you'll have some on screen prompts make sure you follow them and choose ntfs file system when it prompts you to. (process will take 30min+ depending on computer speed)
15. Once your installation has been completed and your at the desktop you want to stop virtual machine. click yes end session. (i know right all that time just to spend two seconds in it)
16.Now you want to find the c.img file which is no longer blank and has windows xp installed to it. Usually in program files/bochs copy it then paste it inside the folder called sdl on your sdcard. If there is already a c.img inside of it just overwrite it.
17.okay almost done (i promise ) your going to want to copy all this code
Code:
megs: 256
cpu: count=1, ips=6000000, reset_on_triple_fault=1, ignore_bad_msrs=1
# filename of ROM images
romimage: file=BIOS-bochs-latest
vgaromimage: file=VGABIOS-lgpl-latest
vga: extension=cirrus, update_freq=25
pci: enabled=1, chipset=i440fx, slot1=cirrus
ata0: enabled=1, ioaddr1=0x1f0, ioaddr2=0x3f0, irq=14
ata1: enabled=1, ioaddr1=0x170, ioaddr2=0x370, irq=15
ata0-master: type=disk, path="c.img"
#ata0-slave: type=disk, path="d.img"
#ata1-master: type=disk, mode=vvfat, path=/sdcard/HDD, journal=vvfat.redolog
#type=cdrom, path="CD.ISO", status=inserted
boot: c
config_interface: textconfig
#display_library: x
# other choices: win32 sdl wx carbon amigaos beos macintosh nogui rfb term svga
log: bochsout.txt
sb16: enabled=1
mouse: enabled=1
sb16: wavemode=1, dmatimer=500000
clock: sync=none, time0=1
Now go to your sdcard/and go the sdl folder and find the bochssrc.txt file overwrite everything in that file with the lines of code you just copied
The megs value at the top is how much ram you want to allocate to windows xp
18 Save te text document and your ready to run windows xp just open up bochs on your phone
Miscellaneous
These are all the os's that ive found that have been duel booted but are not worth it or a tutuoriol was never released will update it as i find them.
so far the only one i know of is Armedslack thsnks to hellvy from what i know of its the same way as bodhi linux but using armedslack packages
MAC OS
Im trying to figure out old mac os and newer ones right now ill be righting a tut once i get it figured out
Just adding another distro. I'm running ARMEDslack. You can use BODHI LINUX approach for installation, but use armedslack's Mini root filesystems instead. For me, there's so many stuff i have to do after installation (mainly recompiling apps & libs) and i'm not sure if anyone interesting in Slackware distro this day. So i'm not recommend this distro unless you have too much free time and know how Slackware work
Another thing, is there anyone get nvidia display driver works? i can't see any practical step to get it working, just ac100 display driver unbuntu package. If anyone get it working, pls share xorg.conf to me
Does ext4 partition has to be the first partition or second to boot bodhi because vfat as second partition cannot be recognized by cwm recovery and I cannot copy any files from internal to external sdcard
el.quechon said:
Does ext4 partition has to be the first partition or second to boot bodhi because vfat as second partition cannot be recognized by cwm recovery and I cannot copy any files from internal to external sdcard
Click to expand...
Click to collapse
first and its not meant to be copied you haven to dd it to it sorry you can't just copy it directly i don't think and fat32 is what the second partition needs to be
gears177 said:
first and its not meant to be copied you haven to dd it to it sorry you can't just copy it directly i don't think and fat32 is what the second partition needs to be
Click to expand...
Click to collapse
it booted in to terminal but usb port didnt work so couldnt use keyboard
No need to flash the kernel to recovery partition, use my dualboot bootloader.
It booted ok for me but it wont let me login at all
Sent from my LG-MS695 using Tapatalk 2
I have a couple questions...
How well does Linux(mainly Ubuntu) run on the A500? Like is it smooth and all the various controls work well.
Does the HDMI out work? If so can you extend the desktop through the HDMI out to another screen. Like have two different windows on each screen.
Drewmungus said:
I have a couple questions...
How well does Linux(mainly Ubuntu) run on the A500? Like is it smooth and all the various controls work well.
Does the HDMI out work? If so can you extend the desktop through the HDMI out to another screen. Like have two different windows on each screen.
Click to expand...
Click to collapse
I'm not sure bout hdmi if you do all the tweaks it runs reasonably well but won't run games and still lags when opening huge programs i had it for a couple of months for the most part you can install whatever you want some programs have missing repositories and you would need to create you own but there not that common i used it for compiling c+ as i need the multiwindow to do it but it will most likely crash if you try to update it i updated it to 12.04 successfully but was then having wifi problems you wil need an external usb keynoard to set it up at first when you boot up click on the top right corner and connect to wifi before doing the setup saves you a couple of steps
gears177 said:
I'm not sure bout hdmi if you do all the tweaks it runs reasonably well but won't run games and still lags when opening huge programs i had it for a couple of months for the most part you can install whatever you want some programs have missing repositories and you would need to create you own but there not that common i used it for compiling c+ as i need the multiwindow to do it but it will most likely crash if you try to update it i updated it to 12.04 successfully but was then having wifi problems you wil need an external usb keynoard to set it up at first when you boot up click on the top right corner and connect to wifi before doing the setup saves you a couple of steps
Click to expand...
Click to collapse
gears177 can you tell me how did you fix wifi after upgrading to 12.04, are you using the ubuntu image from netham and while upgrading did you have any trouble with the packages related to plymouth
el.quechon said:
gears177 can you tell me how did you fix wifi after upgrading to 12.04, are you using the ubuntu image from netham and while upgrading did you have any trouble with the packages related to plymouth
Click to expand...
Click to collapse
i never did fix it i tried everything i could think of nthing worked i dont know it seems that its not even turning on your wifi card i dont know maybe mess around in terminal and try to turn it on with wlan0 up or whatnot im not sure maybe if i get some free time ill try again as for updating i did it in small amounts and i didnt update everything im not sure but i did have a couple of errors they might of been related to plymouth
gears177 said:
i never did fix it i tried everything i could think of nthing worked i dont know it seems that its not even turning on your wifi card i dont know maybe mess around in terminal and try to turn it on with wlan0 up or whatnot im not sure maybe if i get some free time ill try again as for updating i did it in small amounts and i didnt update everything im not sure but i did have a couple of errors they might of been related to plymouth
Click to expand...
Click to collapse
Thats it plymouth i dont know why it keeps failing to instAll and i tryed that thousand times upgrading it always break wifi
Sent from my LG-MS695 using Tapatalk 2
el.quechon said:
Thats it plymouth i dont know why it keeps failing to instAll and i tryed that thousand times upgrading it always break wifi
Sent from my LG-MS695 using Tapatalk 2
Click to expand...
Click to collapse
try installing it manually might work
sorry it took so long guys but its finally done for the most part
does netham have a source code for his kernel
el.quechon said:
does netham have a source code for his kernel
Click to expand...
Click to collapse
maybe in the original thread i didnt find one but then again i didnt really look
http://forum.xda-developers.com/showthread.php?t=1158260
Great work man! I am so happy as a huge ubuntu fan to have this tutorial here for my beloved device.
Sent from my A500 using xda app-developers app
Hey guys is there a script like v6supercharger for ubuntu
Sent from my LG-MS695 using Tapatalk 2
lifeofcoding said:
Great work man! I am so happy as a huge ubuntu fan to have this tutorial here for my beloved device.
Sent from my A500 using xda app-developers app
Click to expand...
Click to collapse
Thanks
el.quechon said:
Hey guys is there a script like v6supercharger for ubuntu
Sent from my LG-MS695 using Tapatalk 2
Click to expand...
Click to collapse
I dont believe so someone could always make one....
Backtrack works natively.
If you go on kernel-xp website there is a RTL8187 kernel for chroot which works well. Its based on acer ICS source code
Sent from my Galaxy Nexus using xda premium
Related
hi, is there a linux, which i can install on my htc wizard? when yes, can you give a link and a introduction?
Thanks!
No, But it is being worked on! So sorry no link!
Link
http://linwizard.sourceforge.net/
Interesting .. for those who decided to go anti M$ .. bump!
ok i want to install linwizard, but it doesn't worked! the error is:
UNABLE TO OPEN LOG FILE ...
TINY_CONSOLE_INIT_DONE .
CANNOT OPEN SCRIPT FILE
\STORAGE\PROGRAMM FILES\HARET\LINUX.HA
i puted the files on storage card or what is storage?
i did it by this introduction
http://omap850.om.funpic.de/downloads/wizard/readme
and here are the files:
http://omap850.om.funpic.de/downloads/wizard/
HELP!
ok i want to install linwizard, but it doesn't worked! the error is:
UNABLE TO OPEN LOG FILE ...
TINY_CONSOLE_INIT_DONE .
CANNOT OPEN SCRIPT FILE
\STORAGE\PROGRAMM FILES\HARET\LINUX.HA
i puted the files on storage card or what is storage?
i did it by this introduction
http://omap850.om.funpic.de/downloads/wizard/readme
and here are the files:
http://omap850.om.funpic.de/downloads/wizard/
HELP!
Click to expand...
Click to collapse
You don't put the files on the storage card. You create a new directory in the root of file system called "Storage". This is confusing I know. You want a new folder called "Storage" on the *same level* as your "Windows" and "Storage Card". Then you put the files in Storage/Program Files/Haret.
Also if you are using the kernal from that site (i.e. pre built) you wont be able to do anything. On boot it will crash with a kernal panic. If you want a working version you have to compile your own kernal from the source in their repositry...and I ain't talking you through that! Even then you only get a command prompt
Lewis
WOW THX!!!
but now i have a kernel panic^^
Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(1,0)
after that the device is freezed
only what i can do is a soft reset!
*grmml*
WOW THX!!!
but now i have a kernel panic^^
Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(1,0)
after that the device is freezed
only what i can do is a soft reset!
*grmml*
Click to expand...
Click to collapse
Yes! I told you that would happen! See my above post. Have compile the newest kernal to get anywhere - and even then you only get a command prompt.
Lewis
Next Problem, did i understood that right, that i need linux on my pc? because that looks like in ubuntu in the shell or a other linux.
cd /usr/local
tar xvfj /path to/arm-linux-gcc-3.4.1.tar.bz2
vi ~/.bash_profile
add in the line: PATH= ":/usr/local/arm/3.3.2/bin"
make su - <username>
Click to expand...
Click to collapse
i havent linux on my computer. so what could i do? can somebody send me the kernel, or his complete folder with linwizard?
mail: [email protected]
Thanks!
Grab a Linux liveCD like Knoppix www.knoppix.org or DSL - Damn Small Linux which is only about 60mb so will be a quick download, if you install it to a USB stick too then you can write files to it as well.
EDIT: Just realised that if all you want to do is to extract files then grab WinRAR it does most things like tarballs and the likes.
Yes you need Linux to compile a kernel - and a fair few dependencies.
I have attached a kernel i compiled (I *think* it's the latest). I can't see why this would be a problem as the source is open to anyone, but if it is let me know so I can remove it.
Lewis
interesting, can anyone post some screen shots of Linux on the wizard?
This one seems a bit more recent, and will get you a command line without a lot of hassle:
http://webtomware.rhoen.de/linwizard/
Hmm.. but the linux seems to be bit far fetch from being usable, huh? Usually, I'm good in getting stuff from the web, but it seems that this linwiz information is a bit hard to dig. I was just wondering, how functional is it currently? I know that there are a few linux for others Windows based phone and they have quite a history to them, so I presume there are some working linux that can be transfer to the Wizard?
Hmm.. but the linux seems to be bit far fetch from being usable, huh? Usually, I'm good in getting stuff from the web, but it seems that this linwiz information is a bit hard to dig. I was just wondering, how functional is it currently? I know that there are a few linux for others Windows based phone and they have quite a history to them, so I presume there are some working linux that can be transfer to the Wizard?
Click to expand...
Click to collapse
Yeh it is. It's all on that webpage I linked a while back. The wiki is where you'll find instructions. If you find the readme file it talks you though it., but the compiled kernel I posted above is the latest anyway. It is only a command line and people are still working on it. Long way from being at the standard of other devices (Blue Angel, Universal etc.). But still, its hope! I for one can't wait.
This one seems a bit more recent, and will get you a command line without a lot of hassle:
http://webtomware.rhoen.de/linwizard/
Click to expand...
Click to collapse
Thats the same thing. Experimental way of getting an x-server running. If i read the forums right they've since found a better way using the more compatible linux frame buffer standard instead.
Lewis
I am interested in Installing Gnu/LinWizard on my Cingluar 8125.. were can i found the ROM.. link please
http://webtomware.rhoen.de/linwizard/linwizard-0.1.4.tar.gz
that works!
Linux i am comming!^^
and now? have anybody linux on his pc, to install like in the readme? i want nano x on the ppc too^^
if anyone could install it, can the person send the files? or the folder?
or how can i install it on windows?
thank you!
any one try to install it in QTEK S200
After switching to linux, my phone no longer recognizes my computer and doesnt give the option to go to disc mode, sorry if its a dumb question but could someone tell me what i need to do to get it working again? Im not familiar with the os yet so im clueless.
you can't use mass storage mode?
it doesnt do anything when i plug it in but charge i have it set to ask what i want it to do when i plug it in
Justjusten said:
it doesnt do anything when i plug it in but charge i have it set to ask what i want it to do when i plug it in
Click to expand...
Click to collapse
Do you have debug turned on on the phone?
Thats because Linux doesnt see your phone. You need to setup UDEV to recognize your Hero. Follow this tutorial. And when I say "Follow" I MEAN FOLLOW. No skipping.
http://forum.xda-developers.com/showthread.php?t=537508
do i have to reinstall linux to do this ?
Justjusten said:
do i have to reinstall linux to do this ?
Click to expand...
Click to collapse
What flavor do you have?
im using mint i think its based on ubuntu
So, did you follow directions? Should work with any flavor of Linux.
im trying but i dont have a .bashrc file so i made one and when i put this code (sudo /etc/init.d/udev restart) into the terminal i get
(Rather than invoking init scripts through /etc/init.d, use the service(8)
utility, e.g. service udev restart
Since the script you are attempting to invoke has been converted to an
Upstart job, you may also use the restart(8) utility, e.g. restart udev
udev start/running, process 2427)
Justjusten said:
do i have to reinstall linux to do this ?
Click to expand...
Click to collapse
No, you don't have to reinstall Linux.
Justjusten said:
im using mint i think its based on ubuntu
Click to expand...
Click to collapse
Mint is a derivative of Ubuntu, so yes, it's based off of it.
Justjusten said:
im trying but i dont have a .bashrc file so i made one and when i put this code (sudo /etc/init.d/udev restart) into the terminal i get
(Rather than invoking init scripts through /etc/init.d, use the service(8)
utility, e.g. service udev restart
Since the script you are attempting to invoke has been converted to an
Upstart job, you may also use the restart(8) utility, e.g. restart udev
udev start/running, process 2427)
Click to expand...
Click to collapse
You don't need to create the .bashrc file... it's already there. The period in front of the bashrc indicates that the file is hidden.
To see hidden files, run this command:
Code:
[B]ls -a[/B]
This will show you hidden files, any files with a period in front of it, will always be hidden.
Or navigate to the folder that it says that it is in and press ctrl + h
This will show you all the hidden files inside of the folder. Without having to use the terminal.
Justjusten said:
it doesnt do anything when i plug it in but charge i have it set to ask what i want it to do when i plug it in
Click to expand...
Click to collapse
Did you try pulling down the status bar and clicking on Charge Only to set it to disk mode?
If all else fails you can reboot to recovery and USB-MS toggle. If that doesn't work then something is messed up in your distro. Test if mounting works while in recovery and report your results.
I already did the control + h to show hidden folders and there isnt a .bashrc there is one under etc except it is bash.bashrc and i cant edit it , and i already tried the usb-ms toggle in recovery and nothing happened. Thanks for all the help so far guys, and if there is something wrong with my distro i dont mind getting a new one, does anyone have and suggestions on what to go with though?
Justjusten said:
I already did the control + h to show hidden folders and there isnt a .bashrc there is one under etc except it is bash.bashrc and i cant edit it , and i already tried the usb-ms toggle in recovery and nothing happened. Thanks for all the help so far guys, and if there is something wrong with my distro i dont mind getting a new one, does anyone have and suggestions on what to go with though?
Click to expand...
Click to collapse
There shouldnt be anything wrong with your Distro. Mint is built off Ubuntu so in essence it should work. Maybe download Ubuntu.
i think ill make a live disc of ubuntu and see if my phone is recognized at that point and if not then i wont install it
You cant edit it because you have to have root access. You should try typing in terminal sudo chmod permissions to give you root access. Im definitely not that good at linux but i figured out a majority of it.
make a file in /etc/udev/rules.d/ called 51-android.rules
here is mine.
Code:
SUBSYSTEMS=="usb", ATTRS{idVendor}=="0bb4", MODE="0666" , GROUP="plugdev"
Make sure you belong to the plugdev group, you probably already are. I can execute adb commands without being root user.
Justjusten said:
i think ill make a live disc of ubuntu and see if my phone is recognized at that point and if not then i wont install it
Click to expand...
Click to collapse
just stick to what works and that's windows 7, i hate linux on a pc.
fixxxer2008 said:
just stick to what works and that's windows 7, i hate linux on a pc.
Click to expand...
Click to collapse
Well that is a debate topic for another place. For me I've formatted the drive on my last 4 new laptops and have not looked back.
Hi!
I read how to make Data2System rom. (http://forum.xda-developers.com/showpost.php?p=14047481&postcount=14)
I try it and it works so good. I wrote a script which do that steps automatically. There is one more difference. Now the script don't flash your rom, just transform the selected nandroid backup. So you don't lose any of your data.
1. Download this zip, and unpack it to your linux running computer.
2. Backup your rom in recovery, and copy the folder (clockworkmod/backup/<yourbackup>) from your phone to the directory where you unpacked the zip.
3. Rename in data2system <yourbackup> folder to <yournewbackup>. Take care <yournewbackup> don't contain spaces.
4. Open a terminal, and type cd <the unpacked folder> (e.g. /home/user/data2system).
5. Type ./data2system <yournewbackup>, check the output in terminal. It should be something like this:
Extract boot.img
806 blocks
Command line: mem=214M console=ttyMSM2,115200n8 androidboot.hardware=swift
End extract boot.img
Change boot configuration
Pack boot-new.img
Resize boot-new.img
Boot image prepared
System and data images replacedIf you get any errors, try this tutorial again!
6. Done, copy back, and you can make a restore It works if:
you have a nandroid backup
your system.img is not bigger than your data partition on your phone
Download zip here: http://dl.dropbox.com/u/18578045/Data2system.zip
If you do it again with the changed backup in practice you'll get your original backup.
Awesome. Gonna try this out.
This doesn't work!!
did you even try it yourself??
i followed everything carefully
data2system is not a recongised command
Because you have to type ./data2system <the name of the folder> and not .\data...
AND check that on your computer is running LINUX
vkrissz said:
Because you have to type ./data2system <the name of the folder> and not .\data...
AND check that on your computer is running LINUX
Click to expand...
Click to collapse
i did that and how do i check if i have linux?
how do i install it?
i am windows 7
Linux is a kind if OS.
Did you heard about Google? You can find for example how to install Ubuntu. Ubuntu is just one of linux OSs. You can run it in virtual machine, or just boot from live cd, or install instead of windows, or install to another partition beside the windows.
androidboss7 said:
i did that and how do i check if i have linux?
how do i install it?
i am windows 7
Click to expand...
Click to collapse
I dont wanna be rude, but I have to ask is this serious?
delsus said:
I dont wanna be rude, but I have to ask is this serious?
Click to expand...
Click to collapse
yes i am being serious!!
I know a little about android and computers!!
androidboss7 said:
yes i am being serious!!
I know a little about android and computers!!
Click to expand...
Click to collapse
Well Linux is an open source operating system, there are alot of differant distributions of it, (infact Android is based on Linux) you can download most distributions of it free, a few are Ubuntu (which I have in a VM) Fedora, Back Track and Red Hat (paid).
It is recommended to either dual boot your PC or run Linux in a virtual machine because program compatibility isnt great with it although you can use emulators to run programs like wine.
The switch from Windows to Linux isnt easy though especially if your not great with computers because there is so much differant.
Here is a download link for ubuntu and VMWare player (both free) for you to try out, and the data2system method in this post will work.
http://www.ubuntu.com/download
http://www.filehippo.com/download_vmware_player/
PM me if you need instructions to install and run them
delsus said:
Well Linux is an open source operating system, there are alot of differant distributions of it, (infact Android is based on Linux) you can download most distributions of it free, a few are Ubuntu (which I have in a VM) Fedora, Back Track and Red Hat (paid).
It is recommended to either dual boot your PC or run Linux in a virtual machine because program compatibility isnt great with it although you can use emulators to run programs like wine.
The switch from Windows to Linux isnt easy though especially if your not great with computers because there is so much differant.
Here is a download link for ubuntu and VMWare player (both free) for you to try out, and the data2system method in this post will work.
http://www.ubuntu.com/download
http://www.filehippo.com/download_vmware_player/
PM me if you need instructions to install and run them
Click to expand...
Click to collapse
thanks bro!!
but i think this is a bit too complicated for me!
but i have 1 question!
if i use mur4iks bootloader to resize my partitions like this (or whatever)
150 system partition and 234 data partition
is that still like data2system??
androidboss7 said:
thanks bro!!
but i think this is a bit too complicated for me!
but i have 1 question!
if i use mur4iks bootloader to resize my partitions like this (or whatever)
150 system partition and 234 data partition
is that still like data2system??
Click to expand...
Click to collapse
Its 2 different things. When you change bootloader it really resize your partitions. It take effect until you change it again.
This script (Data2system) only change one of your nandroid backups. So when you flash a new rom, or restore one of your elder backups the system partition will be the original partition. Its safer then change the bootloader, but it take effect only for one backup.
For you: if your data partition size is 234 and your system is 150 (because you change your bootloader) and then you do Data2system. On that rom you will have only 150 data.
Data2system is for someone, who need more space, but don't want to resize partitions or change bootloader.
this is an easy pease guide to install Ubuntu with working Busybox on your samsung galaxy Tab 10.1
Requirements:
A rooted device (there are lots op threads on xda on how to root your 10.1)
after rooting download Ubuntu installer Free
the second app you need to download is busybox installer
and third you will need to download and install android-vnc you will need this to view the ubuntu after instalation
and then last but not least you can download a overclocking kernel to make things work smoother. there is a thread in xda about this.
and then download the setcpu.apk file. search it on google.
If you have any trouble finding the correct apps and kernels please post in your reply and I will give you the links to the kernels I am using uploaded by myself for you to download
Okay so lets get this party started
okay so after rooting your device install the Ubuntu Installer Free and follow the promts. it is an easy to use app which guides you to 3 downloads. the first download is the ubuntu.sh file. and then there are two links to download the ubuntu image. If you want a light (not good looking) version of ubuntu download the smaller image (the second option of the downloads).
If you want the gnome (sexy looking ubuntu) download the third option.
while you are downloading the files GO AHEAD and install the BusyBox installer app. then choose the 1.18.4 version and install it into you system/bin directory. it will give you the directory in a list to choose. once thats done install the same version again but in the system/xbin directory.
while you wait for ubuntu installer to download the images for you go ahead and search for that nifty overclock kernel. make sure IT IS NOT the one from zedomax because then you will have no screen rotate ability. look for an overclock kernel that has ov_oa in its description. once again post in this thread if you are having troubles and i will upload my kernel.
So after ubuntu installer has downloaded files go ahead and extract them into the /sdcard/ubuntu folder (you will have to create the folder)
after you have extracted the files into /sdcard/ubuntu folder (this directory is in the root of your tab. you do not have to create a folder in the root saying /sdcard/ubuntu. you can just make a folder named Ubuntu and drop the files in there.
so after plainc the files into the Ubuntu folder go to you terminal on your device. if you dont have a terminal you can download it from the market for free. its called android terminal.
in the terminal tipe the following
su
cd /sdcard/ubuntu
sh ubuntu.sh
if you have correct busybox installed you will get a prompt that asks you for the screen size. make the screen size 1280x800
then IF it gives you a choise between lightlinux or Gnome. select option 2. gnome
after that done open android vnc and set the following
name: ubi
password: ubuntu
adress: localhost
port: 5900
and then select connect.
and congratulations. everything was perfect. if not. pm me or reply in this thread for support.
Have you test it on Galaxy Tab 8.9
Hi. it will work on the galaxy Tab 8.9. just follow the same steps and make sure your device is rooted. as for the overclocking on the 8.9 I am not sure what the steps are
Was just wondering how much space does an installation like that take up? And will an Ubuntu install like that actually support everything that "normal" Ubuntu does (for instance compiling python, c, etc. on the device?). What about programs that work with Ubuntu on a PC, will they work on the Tab as well?
it takes up to 4gig of your storage. the ubuntu for the tab is ubuntu 10 Gnome. so everything works as normal ubuntu 10 would work. python and all those compiling programs will work. if you connect a mouse and keyboard to you tab it would work the same way as it would on a pc.
llewelyn12 said:
it takes up to 4gig of your storage. the ubuntu for the tab is ubuntu 10 Gnome. so everything works as normal ubuntu 10 would work. python and all those compiling programs will work. if you connect a mouse and keyboard to you tab it would work the same way as it would on a pc.
Click to expand...
Click to collapse
Nice, will give it a try to see if I can get some of my pygame projects to work (just for the kicks of it) .
I'm guessing you can't use the virtual keyboard with it though right? You need a hardware one? Or maybe, you could download a virtual keyboard for Ubuntu and see if that works ... hmm ... testing time! ^_^
PS: Do you know which desktop environment is used in the light version? Since I have the 16GB tab and I'd mostly use linux through the command prompt to program some basic stuff etc. I wouldn't really need a good desktop interface, just enough to run some graphic stuff when needed. Plus a lightweight DE would run faster
there is an awesome virtual keyboard you can download its called florence. it look ssexy and works good for me.but i stil prefer the manual keyboard.
Check out this pic. It gives an on screen keyboard
Sent from my GT-P7500 using XDA
Does the touchscreen work alright? I remember the native port had troubles with it.
Okay, after a bit of testing I thought I'd share my findings.
The installation was really simple, even though I had problems at first due to a wrong Busybox version - but I downgraded to 1.18.4 and it worked just fine.
I've tried both the "full" install and the "small" one. Both installed without problems, but the "full" one noticeably slower, even when running LXDE desktop environment. Guess that's one of the prices you have to pay for a system with way more applications. Apart from being kinda slow, mostly everything worked fine, the only problem I found was that if you wanted to change the background color of the terminal (the transparent thing wasn't doing it for me) it crashed. Otherwise I've tried out firefox, thunderbird etc. and it all worked fine.
On the "small" install, things seemed faster, CPU/memory was definitely stressed much less then in the full version. But, I ran into a quite big problem - terminals inside the GUI don't work at all. Everytime I run the lxterminal (tried installing some other terminals too, same problem) it starts up, but doesn't do anything. It doesn't even show the usual prompt (for instance "[email protected]>" or something like that). That means you can't run any terminal commands or apps (like top) through the GUI. You CAN however, run apt-get install through the terminal emulator you used to start the whole thing up.
So I worked around the problem by installing stuff from the terminal emulator, then trying it out in the GUI. It works, but it's definitely a real setback, since you can't even do simple stuff like "python test.py" etc. (well, you can through the terminal emulator in android, but then you're limited to text stuff, can't start up tkinter or pygame for instance).
I've managed to run a simple game made in pygame, and it actually had around 20 fps, but since you're looking at it through android-vnc, there's no way for stuff like that to be playable. Felt nice to see your python work on android, especially if you're not on good terms with Java .
I'd also recommend setting the resolution to something smaller, since you have to take the status bar into account - if you don't do that, you'll have to "scroll" up and down to see the whole screen - I've settled on 1280x720, seems to work fine for me.
Another problem I've noticed is that the Esc, F1, F2, ..., F12 keys didn't work inside linux (I'm using an Apple Wireless keyboard). Also, I couldn't play any music files (wanted to see if voice was working).
I'll definitely play around with this a bit more, and I can see myself using this (probably directly through the android terminal emulator, since it detects all my keyboard keys and has auto-completion etc.) for some non graphical programming in Python and C on the move, even without a hardware keyboard it's manageable.
What about anyone else? Did you try it out and what did you think? Anyone has any solutions to my terminal and special keys problem?
PS: Touchscreen doesn't have any problems, you have a few different input modes that you can play around, I haven't found one that would suit me perfectly though (the one I like best can't right click it seems). Ah well, nothing's perfect
Wow man, thanks for your feedback and support! there is a keyboard you can download inside software centre that gives you all the cool keys you would need. but seeing that you cannot use the lxterminal it pretty useless. ill see what I can find out about that but in the meantime thanks a lot for the feedback
nightmarebadger said:
Nice, will give it a try to see if I can get some of my pygame projects to work (just for the kicks of it) .
I'm guessing you can't use the virtual keyboard with it though right? You need a hardware one? Or maybe, you could download a virtual keyboard for Ubuntu and see if that works ... hmm ... testing time! ^_^
PS: Do you know which desktop environment is used in the light version? Since I have the 16GB tab and I'd mostly use linux through the command prompt to program some basic stuff etc. I wouldn't really need a good desktop interface, just enough to run some graphic stuff when needed. Plus a lightweight DE would run faster
Click to expand...
Click to collapse
I don't have the tablet (yet-hopefully gonna get one soon) but I'd suggest trying e17 (enlightenment) as your desktop environment. It is lightweight (at least compared to GNOME and KDE), IMO it looks nicer than other lightweight DE's (though the default mouse navigation style is not typical) and it has a touchscreen option/version/interface (don't exactly know what to call it). I have never tried the touchscreen version, but I have seen some screenshots and when I tried it out on a regular computer it asked if I want the touchscreen UI or the normal one. AFAIK it has its own onscreen keyboard (haven't tried it). I'm pretty sure gnome has one as well (somewhere in accessibility)
nightmarebadger said:
Okay, after a bit of testing I thought I'd share my findings.
The installation was really simple, even though I had problems at first due to a wrong Busybox version - but I downgraded to 1.18.4 and it worked just fine....
Click to expand...
Click to collapse
Badger, thanks for the mention of downgrading to 1.18.4. Thanks sent to you and the OP
I got it to run fine on my E4GT phone using 1.19.4 but it did not want to work on the Tab. I found that the following apps worked best on my Tab:
1. BusyBox (by Stephen Stericson) - just run this and even if you have 1.19.4 just use the drop down to select 1.18.4 and it will copy over it for you.
(Do not use the uninstall option as it is not needed and can cause problems)
2. Android Terminal Emulator (by Jack Palevich)
3. android-vnc-viewer (by androidVNC team + antlersoft)
Other apps may work but I have found the combination of these 3 to get ubuntu running on my Tab10 just fine.
btw Badger... I am with you 100% on not being on good terms with java
Graphics problem
I've installed this on my Samsung Galaxy Tab 8.9. I seem to have it operating OK but the graphics seem to not be working. The icons on the left are a black and white blur. I have changed the colour format to all of the different settings and no luck - any ideas? Thanks.
Permission Denied
When trying to bootubuntu I keep getting permission denied. I was skipping the su step, as I was following someone elses instructions, and I am now getting farther, but still permission denied at bootunbuntu. I haven't tried a linux flavor since red hat almost 10 years ago, and I was no guru then, so I'm sure whatever I'm missing will be rediculous...
wat kernel
llewelyn12 said:
this is an easy pease guide to install Ubuntu with working Busybox on your samsung galaxy Tab 10.1
Requirements:
A rooted device (there are lots op threads on xda on how to root your 10.1)
after rooting download Ubuntu installer Free
the second app you need to download is busybox installer
and third you will need to download and install android-vnc you will need this to view the ubuntu after instalation
and then last but not least you can download a overclocking kernel to make things work smoother. there is a thread in xda about this.
and then download the setcpu.apk file. search it on google.
If you have any trouble finding the correct apps and kernels please post in your reply and I will give you the links to the kernels I am using uploaded by myself for you to download
Okay so lets get this party started
okay so after rooting your device install the Ubuntu Installer Free and follow the promts. it is an easy to use app which guides you to 3 downloads. the first download is the ubuntu.sh file. and then there are two links to download the ubuntu image. If you want a light (not good looking) version of ubuntu download the smaller image (the second option of the downloads).
If you want the gnome (sexy looking ubuntu) download the third option.
while you are downloading the files GO AHEAD and install the BusyBox installer app. then choose the 1.18.4 version and install it into you system/bin directory. it will give you the directory in a list to choose. once thats done install the same version again but in the system/xbin directory.
while you wait for ubuntu installer to download the images for you go ahead and search for that nifty overclock kernel. make sure IT IS NOT the one from zedomax because then you will have no screen rotate ability. look for an overclock kernel that has ov_oa in its description. once again post in this thread if you are having troubles and i will upload my kernel.
So after ubuntu installer has downloaded files go ahead and extract them into the /sdcard/ubuntu folder (you will have to create the folder)
after you have extracted the files into /sdcard/ubuntu folder (this directory is in the root of your tab. you do not have to create a folder in the root saying /sdcard/ubuntu. you can just make a folder named Ubuntu and drop the files in there.
so after plainc the files into the Ubuntu folder go to you terminal on your device. if you dont have a terminal you can download it from the market for free. its called android terminal.
in the terminal tipe the following
su
cd /sdcard/ubuntu
sh ubuntu.sh
if you have correct busybox installed you will get a prompt that asks you for the screen size. make the screen size 1280x800
then IF it gives you a choise between lightlinux or Gnome. select option 2. gnome
after that done open android vnc and set the following
name: ubi
password: ubuntu
adress: localhost
port: 5900
and then select connect.
and congratulations. everything was perfect. if not. pm me or reply in this thread for support.
Click to expand...
Click to collapse
Im having problem, terminal emulator say loop missing.
So plz provide me kernel link and name os version on wich tat kernal need to b flashed
model: samsung galaxy tab 10.1 3g (gt-p7500).
help me for loop supporte kernal
sriabhi said:
Im having problem, terminal emulator say loop missing.
So plz provide me kernel link and name os version on wich tat kernal need to b flashed
model: samsung galaxy tab 10.1 3g (gt-p7500).
Click to expand...
Click to collapse
Hello sir,
I need a kernal for loop support on samsung galaxy tab 10.1 3g
(model: gt-p7500).
Plz send me link for kernal and tell me on what rom that kernal
has to be flashed.
can you please direct me to the Ubuntu Installer Free? Can't seem to find it on Play market.
komorka said:
can you please direct me to the Ubuntu Installer Free? Can't seem to find it on Play market.
Click to expand...
Click to collapse
It's called "Lunux Ultimate Installer" now...or something along those lines anways. If you search for Ubuntu Installer, it comes up.
llewelyn12 said:
this is an easy pease guide to install Ubuntu with working Busybox on your samsung galaxy Tab 10.1
Requirements:
A rooted device (there are lots op threads on xda on how to root your 10.1)
after rooting download Ubuntu installer Free
the second app you need to download is busybox installer
and third you will need to download and install android-vnc you will need this to view the ubuntu after instalation
and then last but not least you can download a overclocking kernel to make things work smoother. there is a thread in xda about this.
and then download the setcpu.apk file. search it on google.
If you have any trouble finding the correct apps and kernels please post in your reply and I will give you the links to the kernels I am using uploaded by myself for you to download
Okay so lets get this party started
okay so after rooting your device install the Ubuntu Installer Free and follow the promts. it is an easy to use app which guides you to 3 downloads. the first download is the ubuntu.sh file. and then there are two links to download the ubuntu image. If you want a light (not good looking) version of ubuntu download the smaller image (the second option of the downloads).
If you want the gnome (sexy looking ubuntu) download the third option.
while you are downloading the files GO AHEAD and install the BusyBox installer app. then choose the 1.18.4 version and install it into you system/bin directory. it will give you the directory in a list to choose. once thats done install the same version again but in the system/xbin directory.
while you wait for ubuntu installer to download the images for you go ahead and search for that nifty overclock kernel. make sure IT IS NOT the one from zedomax because then you will have no screen rotate ability. look for an overclock kernel that has ov_oa in its description. once again post in this thread if you are having troubles and i will upload my kernel.
So after ubuntu installer has downloaded files go ahead and extract them into the /sdcard/ubuntu folder (you will have to create the folder)
after you have extracted the files into /sdcard/ubuntu folder (this directory is in the root of your tab. you do not have to create a folder in the root saying /sdcard/ubuntu. you can just make a folder named Ubuntu and drop the files in there.
so after plainc the files into the Ubuntu folder go to you terminal on your device. if you dont have a terminal you can download it from the market for free. its called android terminal.
in the terminal tipe the following
su
cd /sdcard/ubuntu
sh ubuntu.sh
if you have correct busybox installed you will get a prompt that asks you for the screen size. make the screen size 1280x800
then IF it gives you a choise between lightlinux or Gnome. select option 2. gnome
after that done open android vnc and set the following
name: ubi
password: ubuntu
adress: localhost
port: 5900
and then select connect.
and congratulations. everything was perfect. if not. pm me or reply in this thread for support.
Click to expand...
Click to collapse
I need the download files to run ubuntu on my galalaxy tab 3 10.1. thanks.
EDIT:
Now you can follow the same process into rogro82's kernel, thanks to Forzaferrarileo. Note that you can just flash the kernel, if you already put it to work with sp3dev's kernel. There's no need to repeat all process.
I've, also, changed some structures for better visualization.
This tutorial is using the sp3dev's precompiled kernel from here or rogro82's precompiled kernel from here. If you want to use rogro82's from scratch or from internal storage, please look, also, some instructions at here. Please note that you will have to build that kernel from sources before proceed. You should be able to use internal storage also, with some changes into this tutorial.
I used a phisical usb keyboard into this tutorial, but bodhi offers an onscreen keyboard into tablet profile. To change into this profile, look at here.
It's partially based into this tutorial. I'll refer to number of steps on that, so please open it. Please read everything before doing anything, and make sure you have no doubts about the process before doing anything. I'm not responsable if it damages your tablet!
First of all, download the Bodhi rootfs from here.
Then, run the first 3 steps from the tutorial above. Please note that if you'll run the rogro82's kernel, the step 2 should be flashing that kernel. For infos about how to flash the second kernel image, please read this thread's first post.
After, extract the Bodhi rootfs into the ext4 partition from your sdcard (I needed to be logged as root or use sudo for doing this step). Make sure to extract directly into the root of the partition (the result of a ls into the root of the partition should be just like running ls /).
Now, you need to donwload the zip file from step 6 from the tutorial. Note that it's not needed to install the packages asked by the step 6, just extract the donwloaded files and copy them into your sdcard's /lib/firmware folder. I just copied the brcm folder into /lib/firmware/brcm and it worked.
Now you are able to boot into the image. Put sdcard into the tablet and then boot from second kernel (hold VOL UP while powering on until it shows bootmenu and select boot into second kernel).
After complete booting, you should have the E17 home screen. For tutorials about this interface, please look into Bodhi website.
For being able to connect into wifi, I needed to open terminology (terminal application into bodhi) and run, as root, the following. Please note that it may not be necessary, but recommended:
- rfkill unblock all
- ifconfig
Now please see what number your wifi got loaded, for me, it was wlan2. I'll call it wlanx, so just change x for the number you got.
- ifconfig wlanx up
To make sure it worked, run "iwlist wlanx scan". It should bring some network details into terminology.
Now open wicd, open preferences and make sure the wifi network is correctly set into wlanx. The default value is wlan0. Then, close preferences and click into reload. Now you should be able to select your network, set up the network preferences and then connect into it.
Now you should be able to install everything you want. As I read, bodhi uses a debian base for armhf version, so you can install anything you can install from debian. Chromium web browser is broken, and firefox is named iceweasel. The default midori web browser works fine, but I personally prefer iceweasel.
Thanks:
sp3dev, rogro82, Kevin Roscom, Forzaferrarileo (if I forgot someone, please tell me, I'll put your name here!)
i'd love to try this! does this run fairly well?:good:
For me it does. I have a class 10 sdcard.
guimendes said:
For me it does. I have a class 10 sdcard.
Click to expand...
Click to collapse
root password?
Tautvaldas said:
root password?
Click to expand...
Click to collapse
Please take a look at here: http://jeffhoogland.blogspot.nl/2012/12/bodhi-linux-armhf-rootfs.html
You can use sudo bash to root access. The password is bodhilinux. Then you can set root password.
Hey this is my first time installing linux on a tablet. Ive got the partitioned sd card, rootfs, kernel ready to go. just not famaliar with how to flash the kernel. Could you maybe give me an idea of those steps? For a first timer as far as android is concerned, the instructions can be a little vague. Thanks
adrock74 said:
Hey this is my first time installing linux on a tablet. Ive got the partitioned sd card, rootfs, kernel ready to go. just not famaliar with how to flash the kernel. Could you maybe give me an idea of those steps? For a first timer as far as android is concerned, the instructions can be a little vague. Thanks
Click to expand...
Click to collapse
Please, first, make sure you're using this bootloader for dualboot. Into the thread there are all instructions for flashing the kernel into secboot, on dualboot section, into first post.
Ive been on v8 unlbootloader for awhile. Just never flashed a sec kernel before.
adrock74 said:
Ive been on v8 unlbootloader for awhile. Just never flashed a sec kernel before.
Click to expand...
Click to collapse
download the fastboot package ( from xda , or search on google ) , next connect the tablet with usb to the pc , reboot the tablet with the bootloader menu and select fastboot ...... the pc will install drivers , when it finish , go in the fastboot folder click SHIFT + right click and select "open command window here " and type this :
fastboot flash secboot <nameofkernel> ex : fastboot flash secboot boot.img
Forzaferrarileo said:
download the fastboot package ( from xda , or search on google ) , next connect the tablet with usb to the pc , reboot the tablet with the bootloader menu and select fastboot ...... the pc will install drivers , when it finish , go in the fastboot folder click SHIFT + right click and select "open command window here " and type this :
fastboot flash secboot <nameofkernel> ex : fastboot flash secboot boot.img
Click to expand...
Click to collapse
Thanks for the reply! Ive flashed this tablet seven ways to sunday within android, but this is kinda new to me. Recently installed 12.04 on my desktop as my intro to linux without a hiccup. I cant seem to get the tablet to respond to my computer. Have the sd card setup ready to go, terminal only says file does not exist ( in regards to secboot) should sd be in tablet or usb? Ive been at it all day. Should i rename anything? Thanks again.
---------- Post added at 04:43 PM ---------- Previous post was at 04:35 PM ----------
I Simply cant seem to get the kernel flashed. Once i get past that, i believe its smooth sailing..
adrock74 said:
Thanks for the reply! Ive flashed this tablet seven ways to sunday within android, but this is kinda new to me. Recently installed 12.04 on my desktop as my intro to linux without a hiccup. I cant seem to get the tablet to respond to my computer. Have the sd card setup ready to go, terminal only says file does not exist ( in regards to secboot) should sd be in tablet or usb? Ive been at it all day. Should i rename anything? Thanks again.
---------- Post added at 04:43 PM ---------- Previous post was at 04:35 PM ----------
I Simply cant seem to get the kernel flashed. Once i get past that, i believe its smooth sailing..
Click to expand...
Click to collapse
Please look if fastboot recognized your tablet. Run fastboot devices. If there's an answer, then your tablet was recognized. It can be missing drivers. From acer site it's possible to find the correct drivers.
ok. so not having the acer drivers seems to be my issue. But, Im trying to do this using my pc running ubuntu, and I'm not sure how to get the acer drivers installed on it. I'm sure there is a trick, but the downloads are for windows. And also the downloads are for honeycomb and ics and im running 4.2.2.
Well I cannot help you installing drivers into ubuntu, I made it into Windows.
on android terminal emulator:
cat /proc/mounts
make sure that data is on /dev/block/mmcblk0p8 not p7
if so then:
dd if=your_second_boot.img of=/dev/block/mmcblk0p7
do it within android, not within linux or initial ramdisk console on you tablet, because linux recognize data as /dev/mmcblk0p7. sorry for bad English.
Tautvaldas said:
on android terminal emulator:
cat /proc/mounts
make sure that data is on /dev/block/mmcblk0p8 not p7
if so then:
dd if=your_second_boot.img of=/dev/block/mmcblk0p7
do it within android, not within linux or initial ramdisk console on you tablet, because linux recognize data as /dev/mmcblk0p7. sorry for bad English.
Click to expand...
Click to collapse
thanks for the response, what will this be doing??
adrock74 said:
thanks for the response, what will this be doing??
Click to expand...
Click to collapse
It'll flash the kernel into the correct partition, via android.
guimendes said:
It'll flash the kernel into the correct partition, via android.
Click to expand...
Click to collapse
ok gotcha. Sorry to be a bother, but i want to do this. Right now ive got my kernel and rootfs on a partitioned sd card in my extsd slot. If I flash the kernel using terminal, where should it be?
adrock74 said:
ok gotcha. Sorry to be a bother, but i want to do this. Right now ive got my kernel and rootfs on a partitioned sd card in my extsd slot. If I flash the kernel using terminal, where should it be?
Click to expand...
Click to collapse
If you follow strict what Tautvaldas said, it'll be placed in the right place for dualbooting, the same if you use fastboot tool.
Thanks for your help guys. But mixing and matching this and that, i give up. Ive flashed the sh*t out of this tab, but without a unified tutorial, i cant make sense of this. Ive been running linux on my pc and laptop, so this isnt foreign to me, but i need a more straight forward tutorial. Thanks though again. We all have to learn sometime:good:
I ran a dist-upgrade on it and my wifi now seems broken - rfkill can unblock it but ifconfig returns SIOsomething something error, permission denied. Ideas?