Database Users

No return from standby mode...

Hi all!
With the latest Dopod's ROM it was nice for the first month, but now I have strange behaviour.
Sometimes the device does not return from standby/suspend mode. It does nothing at all if I press the power button. The LEDs are blinking as usual and if I call my mobile from other phone, I got no answer signal, whi my Prophet does not ring at all, means that GSM part works. Any alarmas and notifications fails to appear, as well.
I noticed, that the prsence of any extra unclosed applications increases the chance to hang. So far, I have no idea how to workaround it...
Any ideas? Is someone have the same problem?

It happens to me with my JAMin with both the old and the new WWE rom. somebody exolain it with the backlight settings, but nobody really understand why it happen

Someone alse have this problem?

I also had this issue for a time. I performed a hard reset and it stopped happening, so I am going to assume that it probably had something to do with some of the software that I had installed on it. My money is on SPB PocketPlus. I've not installed it since the hard reset and it hasn't happened since.

Any extra ideas?

I have the same behaviour since the very first day i upgraded to the latest rom.
I find that it happens regularly if it does, meaning you soft reset the device to get access again and then sure enough one hour later again the same behaviour. I have been on travel the last weeks, where i did not have a chance to sync the device and I have not experienced this behaviour at that time.
Maybe it has something to do with the Sync Process.
I hope we can dig into this a little more because it is really annoying. Especially if you consider that the phone does not ring anymore so you never know if someone calls or not.
Cheers Ulf

Password?
Have you set a password on your phone? If so, then remove the password and see if it makes a difference.

Yes I use the Password Funtcion on the PDA part and also for the SIM card.
I will try to turn off the PDA password and see what happens.
I keep you posted.
Thanks for the suggestion.
Ulf
___________________________
Dopod 818pro

Hi All,
turning off the PIN function has solved the problem. The effect is reproducible.
Raised a next question though:How to protect from your wife sniffing into your private appointments without using the PIN?
Gruss Ulf

I have no used any passwords, but has the problem. I've noticed that it happens when the phone is charging. But not only that.

i had the same issue...i read before somewhere in the other forums...(maybe this forum but couldn't find it) to adjust the backlight and standby time to the same value..that fixed mine and hope will work on yours.

thycpt737 said:
i had the same issue...i read before somewhere in the other forums...(maybe this forum but couldn't find it) to adjust the backlight and standby time to the same value..that fixed mine and hope will work on yours.
Click to expand...
Click to collapse
Thanks great, so far it helps. If I got the bug agait - I will post. BTW, on the Dopopd's 2.15 it is the only reason for softreset, all the rest works fine!

I have the same problem with prophet touch IX and VIII.
Sometimes, after the device was set to standby (or the display was disabled after some minutes), I can't enable it by pressing the powerbutton.
It seems to have contact to the GSM net (you can call the phone, but it won't ring).
ActiveSync also recognizes the phone, but won't connect.
Maybe this happens less often with battery ~70-100%, but I'm not sure.
The problem occured some weeks after installing Touch IX, and didn't disappear after changing to Touch VIII.
With pdaviet 6, there wasn't anything like this (only the known bootscreen-freeze-problem).
Any ideas?

I had the Standby of Death SOD this is when the phone fails to come out of standby with a power button press. This issue only affects some people on some networks. I'm not sure if its a network problem or a software problem but as only a minority of people have it, I suspect its mainly a network problem there is a software solution.
The solution is to change the phone settings band option from auto 3G/2G to either 3G Only (WCDMA + UTMS 2100 in Europe) or 2G Only (GSM + AUTO) depending on your requirements.
Also read this thread http://forum.xda-developers.com/showthread.php?t=540943&highlight=standby&page=2where the resolution was to get a new SIM.
Obviously this only solves the problem when the crash is because of the sim and/or settings which impact the sim. To rule out a software cause its best to start with a hard reset.

Display dims but does not turn off after timeout

First of all sorry for opening a new thread.....did search but didn´t find anything.....and I usually get annoyed myself by people asking question that have already been answered....
Problem: once in a while - and in no understandable pattern - my HD does not switch to standby after the set timeout (60s for me). Soft-reset does not solve the issue, but it disappears after a while (several times turning the display on/off). Have not changed/installed anything recently. First blamed it on S2U2.....uninstalled and problem seemed to be solved, but only until today - now it´s back in all its glory....
Already compared the - what I think - relevant registry values to my Diamond registry....no suspects there.
And no, there is no video-, audio-, or navigation program running in the background, as the problem manifests itself right after a restart/soft-reset....
Any ideas?
Thanks!!

mine does the same...I've just gotten used to it.

twisted-pixel said:
mine does the same...I've just gotten used to it.
Click to expand...
Click to collapse
Hmmm....I don´t want to get used to it, because whenever the device wakes up (missed call, reminder, alert etc.) the display stays on (altough dimmed) using up battery power....

Same problem here with my Diamond.
Any news or ideas on this?

Same for me, and it's a very big problem!
I've read in some of the other posts that it may have to do with the activation of auto-screen lock that is included in the ROM, but this isn't turnd on in my case!
I use my Blackstone professionally, which means I need as much battery power as possible on one charge! At the moment this problem makes the device last for about half a day during work!
If anyone has a fix, I would appreciate hearing about it

[Q] Screen Timeout 2 Second MaDnEsS...

I got my 32GB AT&T Galaxy s4 one week ago today. Had to make an 8 hour road trip to get one but I would say it was very much worth it. I am having this maddening problem where a couple times a day the Display screen timeout keeps re-setting itself to (2 seconds) Unbelievably frustrating considering I can barely get the screen unlocked in 2 seconds and if I blink I have to do it all over again.
But wait, don't walk away just yet, there's more! I have already factory reset 3 stinking times trying to get to the bottom of this and when I woke up this morning it was back to (2 second). Furthermore it shows (2 seconds) in brackets like that so I assumed this was the default value but after checking just now while I was typing this post I noticed after changing it back to my preferred 30 seconds that the 2 second option vanishes. I'll snap a screenshot next time this happens.
Anybody else seen or heard of this problem? I assumed everybodys was doing this until I started searching and found 0 others with the problem. Is my phone The Chosen One?

Yes, i have it also and i found some forums where they discuss same problem, but no solution . Let's think what we have in common..
I have this app called Light Flow, do you?
Also which things you have on?
I have nfc, snart view, smart scroll, air view, air gesture

whatever61 said:
Yes, i have it also and i found some forums where they discuss same problem, but no solution . Let's think what we have in common..
I have this app called Light Flow, do you?
Also which things you have on?
I have nfc, snart view, smart scroll, air view, air gesture
Click to expand...
Click to collapse
Absolutely have Light Flow. I never leave home without it.
NFC. Yes
Smart View. No
Smart Scroll. No
Air View. Yes
Air Gesture. Yes.
I thought for sure it must be Smart Stay malfunctioning but I don't even use that.

maybe it has something to do with Light Flow?? this app caused weird bugs sometimes...
wanna try to turn it off for a while and let me know if it helps?

whatever61 said:
maybe it has something to do with Light Flow?? this app caused weird bugs sometimes...
wanna try to turn it off for a while and let me know if it helps?
Click to expand...
Click to collapse
Worth a shot. I'll play with it and see. Thanks for the idea!

I'm having the same issue and I also use Light Flow - any developments?

Work around
Guys, Did yo get this sorted? I had exactly the same problem which has been driving me mad but managed to sort a workaround which works perfectly. Let me know if this wasn't sorted and I'll post it.

I turned off "Power Saving" mode and it hasn't done it since.
EDIT: Nevermind... just had to give it more time.

Islandguci said:
Guys, Did yo get this sorted? I had exactly the same problem which has been driving me mad but managed to sort a workaround which works perfectly. Let me know if this wasn't sorted and I'll post it.
Click to expand...
Click to collapse
Would you kindly post the workaround? I'm out of ideas at this point.

You all have LightFlow. LightFlow causes other odd issues with Accessibility settings with the S4. Get rid of it and for now use Light Manager. Its much better IMO because it doesn't need to be activated in Accessibility settings, it just works.

Well, I didn't have power saving on and was still getting the problem. I uninstalled light flow and still had the problem. To resolve this for now I use an app called tasker, I had it already because it is a very cool app anyway but once installed if you don't have it just create a rule to deal with the time out issue. My rule for example went like this.
If the time is between 00.01 and 23.59 then set display timeout to 2 minutes. This fixed the problem for me.
In fact you could create other rules to do the same but this does it nicely.
Sent from my GT-I9505 using xda app-developers app

Islandguci said:
Well, I didn't have power saving on and was still getting the problem. I uninstalled light flow and still had the problem. To resolve this for now I use an app called tasker, I had it already because it is a very cool app anyway but once installed if you don't have it just create a rule to deal with the time out issue. My rule for example went like this.
If the time is between 00.01 and 23.59 then set display timeout to 2 minutes. This fixed the problem for me.
In fact you could create other rules to do the same but this does it nicely.
Sent from my GT-I9505 using xda app-developers app
Click to expand...
Click to collapse
I set my rule to set the display timeout every time the display is turned on. I couldn't make it work the way you did it. I think I need more expertise.
Thanks again.

I haven't seen this issue again since starting this thread. Go figure. I haven't changed anything at all either. Still using lightflow in its entirety just like I was before and never changed anything else that I can recall. Weird.

Ok, I think I have this issue figured out. Here's how I resolved it:
1. Open Light Flow
2. Open Settings
3. Scroll all the way down to the section "Additional LEDs found"
4. Deselect "lcd-backlight control' and exit

I have the same exact problem.. Tried everything but with no luck!! Any one figured it out!??

OutCell said:
I have the same exact problem.. Tried everything but with no luck!! Any one figured it out!??
Click to expand...
Click to collapse
Just to let you guys know, i was able to fix this problem but with a sacrifice.. I reset my phone to factory settings & reinstalled all apps except for Light Flow (The problem did arise after i installed it) and now the screen times out perfectly with the duration i set. :good:
I just hope Light Flow fix this issue soon because i got used to the LED lights indications,, they were very useful.

Solution (I hope)
It's light flow's turn on screen option. They're patching it in the next update, but for now all you have to do is uncheck switch screen on in the notifications.
I tried this tonight. Will post back confirmation from the link
I just registered so I can't post the link to the forum I found it on.

Screen timeout
So I have a Galaxy s4 and started having this same issue with my phone. I would set the timeout for 3 minutes but it would reset back to 0 after so long. I dont have that application you all are talking about. I did root my phone which I do not think matters.
Essentially there are 2 spots to change the screen timeout I found.
My device>Display>Screen timeout
and
My device>Accessibility>Screen timeout (which was set to 0 even though the other was set)
I will let you know if this resolves the screen timeout issue for me.
Thanks
-Jon

goonies83 said:
So I have a Galaxy s4 and started having this same issue with my phone. I would set the timeout for 3 minutes but it would reset back to 0 after so long. I dont have that application you all are talking about. I did root my phone which I do not think matters.
Essentially there are 2 spots to change the screen timeout I found.
My device>Display>Screen timeout
and
My device>Accessibility>Screen timeout (which was set to 0 even though the other was set)
I will let you know if this resolves the screen timeout issue for me.
Thanks
-Jon
Click to expand...
Click to collapse
Disregard....still having the issue.

mharmon said:
I'm having the same issue and I also use Light Flow - any developments?
Click to expand...
Click to collapse
I also was having the same 2 second screen problem and found the unchecking the (turn on screen) to (Switch the screen on for 5 seconds when the notification arrives) in each of the notifications in Light flow has solved my problem. It seems that it was the cause of resetting the screen time out to 2 seconds.
Can someone else try this and confirm that this is the cause???

[Q] Screen shuts off trying to unlock

My friend just got a G2 and is having this issue as well. I use a pattern unlock and am running Clean Rom. Some times when I try to unlock the screen it just randomly shuts the screen off while Im trying to draw the unlock pattern. I'm hoping someone has a solution for this.
Thanks

prerunnerseth said:
My friend just got a G2 and is having this issue as well. I use a pattern unlock and am running Clean Rom. Some times when I try to unlock the screen it just randomly shuts the screen off while Im trying to draw the unlock pattern. I'm hoping someone has a solution for this.
Thanks
Click to expand...
Click to collapse
When I use the power button on the back of the phone instead of the knock-on, I had this same problem. I was rooted but on stock rom. I've read other posts about the same problem. I would try to put in my pattern and midway through the screen turns off. Sometimes it would be two seconds, sometimes like 10. Don't know what the problem was.
My knock-on feature was barely working. Some guy recommended getting this case: http://www.amazon.com/gp/product/B00FEQU1NG/ref=oh_details_o01_s00_i00?ie=UTF8&psc=1
I needed one anyway so I got it. Haven't had an issue with the knock-on feature anymore. No idea why haha but whatever, it works. Kind of a ghetto workaround.

I'm having the exact same issue.
Factory reset several times, installing my usual apps or having just the default apps without updating them didn't make any difference.
After a factory reset I disabled the knock knock feature and still, when I try to bring my screen up and unlock, it immediately shuts off, preventing me from swiping.
Another side effect is, when I make a phone call, the screen immediately goes blank and it will never turn back on unless I restart by holding on to the power button, this is especially inconvenient when I need to dial some options (i.e.) voice mail options, corporate automated options.
All of the above happened while I had my Incipio feather shine case. (incipio.com/cases/smartphone-cases/lg-smartphone-cases/lg-g2-cases/lg-g2-cases-verizon/feather-shine-case-for-lg-g2-verizon.html) I took the case off and did another factory reset last night, and so far the knock-on rate has improved from 0% to at least 60-70%... Strangest thing.... If anyone else can shed some light onto what the hell happened/is happening, I'd really appreciate it! It's been a frustrating ride since this problem surfaced about a couple weeks ago. I had this phone for about 2 months now....

I'm having this problem too. It happens with both knock on and power button wake. I have noticed that the screen is not actually immediately turning off, though. In a completely dark room, I can still see faint outlines of my lock screen. Then, after the brief time out for dimming, the screen will go to its dimmed brightness (which is far brighter than what's concurring after waking the phone). I'm able to unlock, reboot, and usually that will solve the problem for a little while, but this is getting frustrating.
Stock rom, rooted, TWRP, Nova Launcher, and xposed. I'm not sure what's causing this.

I know it's been said many times but if you block the sensors with your fingers after waking the device, your screen will turn back off. Its a security feature/bug and I would assume this is what's happening here.

I ended up getting a certified-like new replacement from verizon... While I had the old one, I did a test with that sensor you're talking about and it didn't really make a difference. I made sure the sensor area was clean without anything covering it and the problems persisted. I really hope LG can find the root cause of this and fix it... Very frustrating.

Not a bug. But this is a feature we do not want. It is called proximity sensor. It is sensing too far imo. It is actually the one next to the front cam. Dont block it within 5 inches in front or you phone will sleep again. That should work with flip case. Annoyingfunction imo. Your device is not broken.

yonba said:
Not a bug. But this is a feature we do not want. It is called proximity sensor. It is sensing too far imo. It is actually the one next to the front cam. Dont block it within 5 inches in front or you phone will sleep again. That should work with flip case. Annoyingfunction imo. Your device is not broken.
Click to expand...
Click to collapse
exactly. the sensor in very sensitive to being covered. Because its hypersensitive and having undesireable effects I would consider this a bug since it is buggy.

I figured out what the issue was, at least on my phone.
Lightflow was detecting a bunch of alternate LEDs, which I felt inclined to tick the check boxes for, just to make sure it could control the LED fully. Having those boxes checked caused my phone to do this. Everything is fine since I've unchecked them, though. No sensor issue, no proximity/case issue, just Lightflow (which still works without those alternate LEDs checked).

Having this issue with my G2, its very annoying. Knock on does not work and screen shuts off after about half a second that I press the power button. Had to reflash to stock the first time this happened and fixed it but after about a month the same problem occured. I could however open by pressing one of the volume button together with the power button.
Hoping to find permanent fix for this problem.

thirtynation said:
I figured out what the issue was, at least on my phone.
Lightflow was detecting a bunch of alternate LEDs, which I felt inclined to tick the check boxes for, just to make sure it could control the LED fully. Having those boxes checked caused my phone to do this. Everything is fine since I've unchecked them, though. No sensor issue, no proximity/case issue, just Lightflow (which still works without those alternate LEDs checked).
Click to expand...
Click to collapse
Yeah that's it Lightflow
Disabling all the additional led found resolve my problem
THX

bigiuly said:
Yeah that's it Lightflow
Disabling all the additional led found resolve my problem
THX
Click to expand...
Click to collapse
Please tell me where to find these settings

taqikazmi said:
Please tell me where to find these settings
Click to expand...
Click to collapse
Settings / Led Control

bigiuly said:
Settings / Led Control
Click to expand...
Click to collapse
There is no option in settings like LED.

taqikazmi said:
There is no option in settings like LED.
Click to expand...
Click to collapse
In settings of Lightflow app

bigiuly said:
In settings of Lightflow app
Click to expand...
Click to collapse
I installed the app and fund the settings but all of them are already unchecked

Auto Rotate intermittently stops working

*update* the latest update from AT&T this month seems to have fixed the auto-rotate function. I have had no issues regarding this problem since applying the update!
Trying to see who else has had this problem and has been able to find any common occurrences behind this mysterious issue.
I can sometimes go quite awhile before the auto rotate stops working but I don't normally turn the phone to landscape unless I'm viewing photos or looking at a video or maybe some websites that aren't mobile optimized.
Toggling the portrait rotate icon from the drop down does not fix the issue. So far the only way to get rotate working is to reboot android completely. I've had a theory that maybe my magnetic car mount is somehow messing with the sensor in the phone or the calibration of the unit but I've used the same magnet mount with my G3 and never had these issues. also sometimes when navigating GPS it will ask me to calibrate the phone and fly it thru the air in a figure 8 but I'll do that like an idiot and the calibration screen never goes away. I've also used the built in diagnostics inside the settings that check all the sub functions of the phone and everything is apparently working without issue!
..... starting to wonder why I even got this phone.
at&t hasn't even started my 50% off bill credits yet for this device...

undivide said:
Trying to see who else has had this problem and has been able to find any common occurrences behind this mysterious issue.
I can sometimes go quite awhile before the auto rotate stops working but I don't normally turn the phone to landscape unless I'm viewing photos or looking at a video or maybe some websites that aren't mobile optimized.
Toggling the portrait rotate icon from the drop down does not fix the issue. So far the only way to get rotate working is to reboot android completely. I've had a theory that maybe my magnetic car mount is somehow messing with the sensor in the phone or the calibration of the unit but I've used the same magnet mount with my G3 and never had these issues. also sometimes when navigating GPS it will ask me to calibrate the phone and fly it thru the air in a figure 8 but I'll do that like an idiot and the calibration screen never goes away. I've also used the built in diagnostics inside the settings that check all the sub functions of the phone and everything is apparently working without issue!
..... starting to wonder why I even got this phone.
at&t hasn't even started my 50% off bill credits yet for this device...
Click to expand...
Click to collapse
You are not alone. Mine did this yesterday. I had to reboot it to fix it. I do not use a magnetic mount but I do use wireless charging stations and I think they have a small magnet. I have done this for months though and so far the auto-rotate glitch has only happened 2 times.

I have had the same issues. But a reboot won't always fix it me.

problem resolved
latest update patch from AT&T seems to have fully resolved the issue of auto screen rotation not functioning. it now works 100% of the time and is even faster at recognizing when the device has been tilted to and from landscape/portrait