Related
Hey guys, I have done a ton of reading and researching about modding android phones since recently migrating from iPhones. I got a Droid1 and did some basic root/rom/overclock etc.
I just got a DX a few days ago and right away decided to start with the modding. Anyways, In a nutshell I attempted to go about the ROMing process in a similar manner to my Droid1 and ended up going to the Rubix1.6 ROM without ever backing up my stock OS.
I wanted to be able to jump back and forth to a blurless/blurred ROM to get a good feel for what I want outta it but am not sure how I should go about getting the stock OS stuff back on. I've read up about the SBF, but is that the only way to go?
Thanx for any help guys, greatly appreciated.
Sam G
Sadly, yes. Since you didn't back up before you started you will have to SBF to get a stock ROM. Be sure to make a nandroid of your modded ROM, SBF, root, backup, then flash back and forth.
Now as far as a Nandroid backup you mean just a backup through clockwork recovery correct?
CBX133 said:
Now as far as a Nandroid backup you mean just a backup through clockwork recovery correct?
Click to expand...
Click to collapse
yea. a nandroid backup is the backup you create in cw recovery
Ok So I did it and restored nicely after doing a wipe after.. Now I can't ACTIVATE my phone. Any ideas why it would mess with the activation. When I hit activate and then 1 it just says to enter the number.. SHIIT
CBX133 said:
Ok So I did it and restored nicely after doing a wipe after.. Now I can't ACTIVATE my phone. Any ideas why it would mess with the activation. When I hit activate and then 1 it just says to enter the number.. SHIIT
Click to expand...
Click to collapse
the activation system has been down for a few hours now. You can try *22899. Or do it online here http://www.verizonwireless.com/b2c/activate. Or just call the 1800 number and do it with a csr.
Ok, I'm hoping it is just a bad coincidence that the activation server is down. I'll pack it up and try again in the morning. If that's what it is then I am all set otherwise. Thanx!
CBX133 said:
Ok, I'm hoping it is just a bad coincidence that the activation server is down. I'll pack it up and try again in the morning. If that's what it is then I am all set otherwise. Thanx!
Click to expand...
Click to collapse
of course it's just a coincidence. flashing a rom or doing an sbf to your phone does not cause the verizon activation system to crash. lol. whenever you sbf your phone or do a factory reset, you have to do the *228 to reactivate. thats normal.
Just some info... when I wipe out my phone and boot it up (skipping) activation it works already. Found this out by wiping my phone, booting it up, and I got a text message immediately. Lol.
CBX133 said:
Hey guys, I have done a ton of reading and researching about modding android phones since recently migrating from iPhones. I got a Droid1 and did some basic root/rom/overclock etc.
I just got a DX a few days ago and right away decided to start with the modding. Anyways, In a nutshell I attempted to go about the ROMing process in a similar manner to my Droid1 and ended up going to the Rubix1.6 ROM without ever backing up my stock OS.
I wanted to be able to jump back and forth to a blurless/blurred ROM to get a good feel for what I want outta it but am not sure how I should go about getting the stock OS stuff back on. I've read up about the SBF, but is that the only way to go?
Thanx for any help guys, greatly appreciated.
Sam G
Click to expand...
Click to collapse
'
Just consider your SBF your 2.3.15 backup copy. It's not a pain. It's easy and it should be a tool in every modder's arsenal. IMO, people who don't know how to sbf, are destined to have to anyway, eventually, if they mod enough. The only thing is that when they have to, they won't know how and will kinda panic. I say be ready to sbf before you root, so you're ready when trouble comes.
Me? I love modifications and will sometimes go too far or make a mistake at 2 am, when I really should be sleeping instead and I wind up bricked. No problem. Just SBF and I'm on my way. If you need further info or how to's feel free to ask.
Steven
Steven58 said:
'
Just consider your SBF your 2.3.15 backup copy. It's not a pain. It's easy and it should be a tool in every modder's arsenal. IMO, people who don't know how to sbf, are destined to have to anyway, eventually, if they mod enough. The only thing is that when they have to, they won't know how and will kinda panic. I say be ready to sbf before you root, so you're ready when trouble comes.
Me? I love modifications and will sometimes go too far or make a mistake at 2 am, when I really should be sleeping instead and I wind up bricked. No problem. Just SBF and I'm on my way. If you need further info or how to's feel free to ask.
Steven
Click to expand...
Click to collapse
Hey just got my replacement x today already rooted and have fly x on it. The sbf back up category is my only weakness. When my phone goes belly up im kinda lost. Do you have or know of any threads walktbroughs on bow to.bring a bricked phone back to life. Im putts replacements for this year through asurion and will have to do this if im bricked again. I was stuck on the tranquility logo couldn't get out. Thanx.
Sent from my DROIDX using Tapatalk
illcat2000 said:
Hey just got my replacement x today already rooted and have fly x on it. The sbf back up category is my only weakness. When my phone goes belly up im kinda lost. Do you have or know of any threads walktbroughs on bow to.bring a bricked phone back to life. Im putts replacements for this year through asurion and will have to do this if im bricked again. I was stuck on the tranquility logo couldn't get out. Thanx.
Sent from my DROIDX using Tapatalk
Click to expand...
Click to collapse
Here's what I used to guide me through the sbf...
Here is a link to the guide I used. It is for the 2.1 SBF though.
http://www.intomobile.com/2010/09/21/droid-x-stock-android/
Here are the instructions with my modifications for 2.2...
IMPORTANT!!! - the directions are for restoring 2.1 so you do not do some of the steps! They were the best I could find. I followed them except for things that did not apply.
instructions:
1. First off, choose the right version of Motorola USB drivers for your computer and install them (32bit) (64bit)
2. Download & install RSD Lite 4.7 (download)
I did not use 4.7 as it is not current. I used 4.9
You will need to patch this after installing. There is an .ini file included in the folder that needs to be placed in your install directory. /Program Files/Motorola/RSD Lite
I used 4.9 and did not have to patch any files- the above step was unnecessary.
3. Download the Droid X Android 2.1 SBF file, which you can find here
of course I used the 2.2 SBF file here...
http://rootzwiki.com/
4. Unzip the SBF file to your desktop
i did not unzip mine to the desktop- i put it where i stash my android files- it made no difference.
5. Run RSD Lite, and click the “…” button, then find the SBF file that you just unzipped to your desktop and select it.
Starting here i followed the directions to the "t". Went through all the steps. !!!!!MAKE SURE YOU START WITH 100% BATTERY!!!!!! It takes a long time and if your phone dies during the process it is a nightmare.
6. Plug your Droid X into your computer and power it down
Go into the Bootloader (with phone off, hold the CAMERA button and VOLUME DOWN, then hit the POWER button)
After holding for 2-3 seconds, release the buttons and RSD Lite should recognize your Droid X
7. Click the start button to flash Android 2.1 to your phone.
of course we are flashing 2.2
8. When the flashing is complete, unplug your phone
The Droid X will likely not boot up all the way, so pull the battery out
Put the battery back into the phone and reboot into Recovery mode ( Hold the HOME button and press POWER until you get an exclamation mark. Release the HOME button and press the SEARCH button)
Using the VOLUME UP/DOWN buttons, navigate to “wipe data/ factory reset” option on the screen, and press the CAMERA button halfway down to execute.
When complete, choose to reboot your phone
9. It takes a while. Hope this helps. And I hope it goes smoothly. It was nerve racking for me. After you have finished the process you will not be rooted. Use the market app "Z4root" or which ever method you prefer.
good luck.
Click to expand...
Click to collapse
thepolishguy said:
Here's what I used to guide me through the sbf...
Click to expand...
Click to collapse
i really appreaciate the guide and quick response im going to try to save these for future refrence.
just tried this method for the experience on the droid i bricked. worked like a charm was a bit easier too. phone rebooted on its own. i wiped just to make sure since i need to send it back to vz i already got my replacement. but this definetly gives me a little more confidence knowing i can bring it back from the dead if i have to. thanks again.
detailed sbf restoration instructions
illcat2000 said:
Hey just got my replacement x today already rooted and have fly x on it. The sbf back up category is my only weakness. When my phone goes belly up im kinda lost. Do you have or know of any threads walktbroughs on bow to.bring a bricked phone back to life. Im putts replacements for this year through asurion and will have to do this if im bricked again. I was stuck on the tranquility logo couldn't get out. Thanx.
Sent from my DROIDX using Tapatalk
Click to expand...
Click to collapse
sure! from http://androidforums.com/droid-x-al...ing-custom-rom-theme-how-unbrick-droid-x.html
*my note: make sure you install moto dx drivers on your PC: http://www.motorola.com/consumers/v/index.jsp?vgnextoid=bda09ec8009a0210VgnVCM1000008806b00aRCRD
C. UnBRICKING INSTRUCTIONS:
HELP ME. Ima noob! I BRICKED MY PHONE!
1. go to Home and DL the leaked full OTA FROYO 2.2 .SBF file.
2. Download and install RSDLite v4.8 (it should be on Home if not, go Google it.)
3. If your phone is stuck on the load screen, pull the battery, wait a minute, push the battery back in and restart with the phone’s Boot Loader Mode (do this by pressing the red camera button + volume down + power button hold all of them in the order that I stated until your phone flashes briefly). Your phone should flash white and a Boot Loader menu will come up. Make sure there is at least 20 to 25 percent battery life remaining in order for the reformat of you phone to complete. If your phone dies in the middle of this process GOD HELP YOU.
4. Run the RSDLite File and connect your Droid X to your computer via USB.
5. Browse for the .SBF file you downloaded in step 1 and click “Start”, at which point the program should run and your phone will proceed to unbrick
6. EASY RIGHT?
7. Once unbricking you will have to go through reactivation of your phone. This is normal so just go through the steps you did when you first started.
8. GUESS WHAT? You made a backup of your previous customizations REMEMBER? If you don’t want to deal with the hassle of re-downloading your entire life onto your phone again follow the “ROOTING” instructions in Part A and redownload Bootstrap and reboot into recovery mode to RESTORE the backup you made by following steps 2-11 in Part B….except you won’t be going to “install from sdcard” you will going to “Backup and Restore” and “Restore from sdcard”.
HELP Please - Error running SBF in RSD Lite
First off, I'm a newbie, so please go easy on me if these are dumb questions. I get the following error while trying to run "VRZ_MB810_2.3.15_1FF_01.sbf" in RSD Lite 4.7 while in boot mode. I don't know what else to do. My phone won't work. Thank you for any advice you can give.
Failed flashing process. [Phone 0000]: Phone is not compatabile with multi-interlace interface super-file. (0x703B): Phone connected.
rossi28usa said:
First off, I'm a newbie, so please go easy on me if these are dumb questions. I get the following error while trying to run "VRZ_MB810_2.3.15_1FF_01.sbf" in RSD Lite 4.7 while in boot mode. I don't know what else to do. My phone won't work. Thank you for any advice you can give.
Failed flashing process. [Phone 0000]: Phone is not compatabile with multi-interlace interface super-file. (0x703B): Phone connected.
Click to expand...
Click to collapse
did you put the patched pst_flash.ini file in the rsdlite install directory?
I put that file in program files>motorola>rsd lite. I did it after installing the program if that matters. The zip file folder name was RSD Lite 4.7+Patch. Also, in RSD Lite in order for the program to recognize my droid x i had to select the "first come first serve device id mode" under the device id options in the config menu. Don't know if this matters, just trying to give as much info as possible. Thanks.
rossi28usa said:
I put that file in program files>motorola>rsd lite. I did it after installing the program if that matters. The zip file folder name was RSD Lite 4.7+Patch. Also, in RSD Lite in order for the program to recognize my droid x i had to select the "first come first serve device id mode" under the device id options in the config menu. Don't know if this matters, just trying to give as much info as possible. Thanks.
Click to expand...
Click to collapse
yea, you can only do it after installing the program. it has to be closed though when you do it and you have to overwrite existing file. if you did all that properly, then it may be a corrupted sbf. I would just install rsdlite 4.8 or 4.9 and retry. those dont require a patch.. if no workie, then redownload sbf.
rsd lite 4.8 is here http://www.multiupload.com/HL0ZAL9GK8
I can't remember the order I did it in so I'll re-install with the instructions you gave. Thank you! I'll report back.
I got a DX a few months ago, rooted it, etc. About a month ago I decided to go ahead deodex it. Installed CWM and did a backup first, then deodexed. During the process the instructions said to copy the guava.odx file out of the modded fileset, so I did. Everything seemed to work OK, rebooted, been fine since.
Early this week I got the update notice for 2.3.340, so I restored the CWM backup, downloaded the update, and tried to install. The phone rebooted and began installing the update. A few seconds into the install I see what looks like a yellow triangle around the progress bar, and it bails out. Once it finishes rebooting I get a message that the update failed.
I haven't removed any bloatware apps, so I don't think it's that. I suspect it's either 1) that I'm rooted, althoughs others here have updated while rooted; or 2) that guava.odx is missing and I'm not sure where to put it back.
Any ideas on my next step? Grab the 2.2 SBF and start over?
THanks.
jjalenak said:
...Installed CWM and did a backup first, then deodexed... ...Any ideas on my next step? Grab the 2.2 SBF and start over?
THanks.
Click to expand...
Click to collapse
Um - sorry. I did read the post wrong.
I am rooted and was able to install. So I don't think that is it. After you rooted - but before you made your back up - did you mess with any system files or remove any bloat ware? You need to have all of that stuff to successfully install the OTA.
I don't remember messing around with anything. I had originally thought I'd remove the bloatware, but ended up not doing that.
Where would I find the stock 2.2 SBF? I can restore that, then update and re-install all of my apps, etc. Can someone also provide the instructions on how to install the 2.2 SBF?
Thanks.
Head over to mydroidworld.com and check out their thread on the update. You can flash it via cw recovery along with the baseband, bootloader, etc.
Sent from my DROIDX using Tapatalk
A full SBF (2.3.320) via RSD cures all then start all over ***MAKE BACK UPS !!!** Then do 2.3.340 via phone.
If you want to really do it right copy your SD to you PC format the SD with your phone and only add back to the SD files you need and know that way you get rid of any old data files that may haunt your phone.
So I hit MyDroidWorld and found the 2.2 SBF thread. Downloaded the file along with the RSD Lite version. Update the Moto USB drivers to the latest 4.8 drivers, and installed RSD Lite. Plugged my X in, making sure it was set for PC mode and Debugging - but it doesn't show up in RSD Lite. What now? Or did I manage to overlook a crucial step?
Thanks.
Found that I had to put the phone into 'bootloader' mode. Did so, and the phone now shows up in RSD Lite. I can select the .SBF file, but the 'Start' button remains grayed out.
<sigh>
It shouldn't be this difficult, should it?
Do I have the wrong .SBF file? The bootloader shows 30.03, so I think that's the correct one for the 2.2 SBF....
Thanks.
Found an approach to flashing the 2.1 SBF here - http://rootzwiki.com/index.php/Smartphones/Motorola/Droid-X/Droid-X.html
This seemed to work (RDS List showed 'Passed' as the final status), but when I go to reboot it is giving me an error. Here's what's on my screen -
Bootloader
30.03
Err:A5,70,70,00,1F
MEM_MAP Blank
Service Req'd
Battery OK
OK to Program
Transfer Mode:
USB
Help! What do I need to do next?
Apparently needed the 2.2 SBF. Flashed it and the phone has re-booted successfully. Whew. What a pain in the a.....!
Thanks.
PS - RSD Lite has a status of 'Please manually power up this phone.', progress is 'Executed; 100%', Result is 'In Process...'. THe phone is powered up, although I do have this odd little blue triangle in the status bar next to the signal strength. If I click 'Close' in RSD Lite I get a message "Application is currently busy. Closing application may DAMAGE the attached device.". Needless to say I'm a little unsure about this. Is it OK to unplug the USB cable and close RSD Lite?
PPS - OK, needed to *228 it. Still not sure about close RSD Lite though...
PPPS - Success! Went ahead and unplugged the USB cable, then closed RSD Lite. Did the 2.3.340 OTA, rebooted, and everything appears to be OK. Need to get my root access back, but that shouldn't be too bad.
Hi guys,
I'm a bit lost and unsure what to do.
I installed GummyJar, and like an idiot, didn't read that I need to be on 2.3.320 or 2.3.340.
I was previously on ZapX for 2.2 (purchased phone in early October). So I'm not sure what to do. Is there an SBF that will directly put me on 2.3.340? Would it be wiser to flash to my original SBF (the_gift2.zip I believe), and let my phone automatically get the OTA update?
I'm not really sure what the best thing to do is.
Thank you for any advice and help.
Did you create a back up before you installed Gummy? I know that is praobably a stupid question since you are asking how to SBF -but I thought maybe you didn't think about restoring your backup?
How to perform the sbf:
I did this. It worked for me. I TAKE NO RESPONSIBILITY IF THIS DOES NOT WORK FOR YOU OR IF YOU MUFF IT UP.
ok- so here is the link that I used as a guide - IMPORTANT!!! - the directions are for restoring 2.1 so you do not do some of the steps! They were the best I could find. I followed them except for things that did not apply.
http://www.intomobile.com/2010/09/21/droid-x-stock-android/
instructions:
1. First off, choose the right version of Motorola USB drivers for your computer and install them (32bit) (64bit)
You probably have already done this.
2. Download & install RSD Lite 4.7 (download)
I did not use 4.7 as it is not current. I used 4.9 download here...
http://dl.dropbox.com/u/7782384/RSD%20Lite%204.9.rar
3. You will need to patch this after installing. There is an .ini file included in the folder that needs to be placed in your install directory. /Program Files/Motorola/RSD Lite
I used 4.9 and did not have to patch any files- the above step was unnecessary.
4. Download the Droid X Android 2.1 SBF file, which you can find here
of course I used the 2.2 SBF file. Make sure you use the right sbf file or you will really be hosed!!! if you are on 2.2 you can get the full sbf file from here...
http://rootzwiki.com/index.php/Main-Page/Droid-X-Full-2.2-SBF.html
5. Unzip the SBF file to your desktop
i did not unzip mine to the desktop- i put it where i stash my android files- it made no difference.
6. Run RSD Lite, and click the “…” button, then find the SBF file that you just unzipped to your desktop and select it.
Starting here i followed the directions to the "t". Went through all the steps.
!!!!!MAKE SURE YOU START WITH 100% BATTERY!!!!!! It takes a long time and if your phone dies during the process it is a nightmare.
7. Plug your Droid X into your computer and power it down
8. Go into the Bootloader (with phone off, hold the CAMERA button and VOLUME DOWN, then hit the POWER button)
9. After holding for 2-3 seconds, release the buttons and RSD Lite should recognize your Droid X
10. Click the start button to flash Android 2.1 to your phone.
of course we are flashing 2.2
11. When the flashing is complete, unplug your phone
12. The Droid X will likely not boot up all the way, so pull the battery out
Put the battery back into the phone and reboot into Recovery mode ( Hold the HOME button and press POWER until you get an exclamation mark. Release the HOME button and press the SEARCH button)
13. Using the VOLUME UP/DOWN buttons, navigate to “wipe data/ factory reset” option on the screen, and press the CAMERA button halfway down to execute.
When complete, choose to reboot your phone
14. It takes a while. Hope this helps. And I hope it goes smoothly. It was nerve racking for me. After you have finished the process you will not be rooted.
15. good luck.
Thank you very much. An extra question to go along with this.
Once I SBF, I'm assuming I'll be back at stock (ick). How long will it take for the OTA to apply? Can I manually update it from there?
EtherBoo said:
Thank you very much. An extra question to go along with this.
Once I SBF, I'm assuming I'll be back at stock (ick). How long will it take for the OTA to apply? Can I manually update it from there?
Click to expand...
Click to collapse
Well- of everything goes right you should be able to go to your phone settings, scroll down to the bottom to "About phone", then "System updates". You should be able to manually update from there.
If you get a "your device is up to date message," then something went haywire. Hopefully that won't happen.
Oh yeah - here is the link for "z4root" -you can use it to root your phone after the update...
http://dl.dropbox.com/u/7782384/z4root.1.3.0.apk
If your phone won't manually update, there is an update.zip floating around here. I have it - but not on the computer I am currently working from -sorry.
Again I want you to know - I am not an expert at this - if something goes wrong I will not be able to help you fix it (probably). I just followed the guide and it worked for me. So if something happens when you follow the guide -I am sorry but I won't be much help.
Thank you. Everything took about 2 hours (SBFing, downloading and installing update, reinstalling apps, etc), and I have the newest Kernel version from the OTA update, and GummyJar 2.5 back on.
I had a bit of trouble SBFing, it kept failing for some reason, but I found a fix via googling around the various Droid forums.
Thank you again, you've been extremely helpful.
Help with Droid X in Buffalo NY
ive tried everything I could for almost a week now.... Stuck in Bootloader Screen 30.04 Err A5,70,70,00,1F MEM_MAP Blank Service Reqd Battery Ok OK To Program..... I came to a Droid X last week from a Rooted for over a year Droid 1 with never a problem flashing... With new Droid X tried to flash Gummy Jar last sat without a wipe ( I know my stupidity thought coming from stock phone could get away with it trying to rush but boy was I wrong) after being stuck at loading gummy jar icons tried to factory reset... been stuck at the bootloader screen since.. tried flashing 1.13.6.2_1sbf and 2.3.32_1FF sbf... got newest drivers and rsd 4.8... ran as administrator... phone never shows either... got it once to do something in rsd saying phone was being programmed with 2.3.32 but when it said finished waited hours never rebooted .... stuck dont know what to do....anyone local want to give it a go email me please [email protected] or try to walk me through what i have to do step by step.... thanks
HOW TO UN-BRICK YOUR FASCINATE NOW THAT YOU HAVE BRICKED IT
SINCE IT HAS COME TO MY ATTENTION SOME POEPLE ARE CONFUSED ABOUT WHAT PHONE THIS IS FOR, I WILL MAKE IT AS CLEAR AS POSSIBLE
THIS IS FOR THE VERIZON FASCINATE
So you think you bricked your phone? The first thing you need to do is CALM DOWN, NO NEED TO PANIC , the odds are great that following this guide will fix your mistakes and recover your phone.
Sorry Fascinate owners, but I can no longer support this thread. As state below I test everything I post to make sure it works as advertised. I no longer have a fascinate so i can not test anything new. Sorry but the links to some of the files are gone I don't have them anymore so I suggest you look through the comments someone will have someplace to get what you need. Your recovery methods may have changed but this can still be used to recover your device. If you are looking for anything new look at nitsuj17's roll up post here, he maintains it very well so you should be able to find whatever else you need there.
I HAVE PURPOSELY BRICKED MY PHONE BY DOING THE THINGS YOU ARE TOLD NOT TO JUST TO TEST THE CAPABILITIES OF THESE RECOVERY PROGRAMS. UNLESS YOU CAN AFFORD TO HAVE YOUR PHONE REPLACED BY INSURANCE, TRUST THAT I KNOW WHAT I AM TALKING ABOUT.
SECTION 1: ODIN
SECTION 2: HEIMDALL
SECTION 3: ROOTING METHODS
Since there seems to be an abundance of posts in the Q&A and General Forums asking for help fixing, unbricking, their Fascinates, I decided to try to make a one stop walk through for odin and heimdall with links. Most of us "flash addicts", Developers, and testers have found the Samsung Galaxy Phones are nearly impossible to truly brick without causing physical damage to your phone, in almost all cases it is possible to get it working again.This is nothing more than how to get back a working STOCK phone, nothing custom here that's in the Development section. The first section will cover odin, the second heimdall, the third recovery and rooting.
USUAL WARNING: Everything here is done at your own risk. None of us on the XDA Developers site are responsible in any way, after all we didn't brick it you did. Doing any of this is your decision, I am just providing a collection of information. All credit for everything here belongs to others, who worked hard to give you a way to fix your mistakes, and it usually is the owner of the device trying something without learning how first, or not following directions that got you here in the first place.
My Phone wont boot at all, is stuck at logo, or I cant do anything with it is it a paperweight?
Most likely, no, so lets get to fixing it. All download links necessary for each process will be posted in this walk through and have been tested to make sure they work.
SECTION 1: ODIN
Everything except for the pit file in odin MUST be done in the PDA slot, if not it will not work requiring you to odin again, or possibly have to use heimdall (covered later in this thread) to fix that. After you download odin, I use v1.83 but I will provide all versions I have.
First you need to decide if you want to go all the way back to DI01 (Android 2.1 "Eclair") or EB01, EC01, or a little more involved process for ED01, or ED03 (android 2.2 "Froyo") it makes all the difference with the files you need. The pit file is not necessary for most recoveries, but I have included due to a few issues that will require you to completely wipe everything but your SD card and start over. All of this is possible thanks to our talented developers. After you have odin and all the files you need on your Windows Vista or Win 7 PC, This DOES NOT work on XP, I have had a lot of responses to support this, so lets go with it won't work use Vista or Win 7. To load any file you click that button and use the windows explorer pop up to find your file select it and click open at the bottom of the window.
Start by powering off phone, the pull out battery.
Open odin and load your file in PDA and ONLY THE PDA (downloads) section, If you knew enough about this program to use the other areas you would not need this walk through, soPDA and ONLY THE PDA (downloads) section, for an, all in 1 Recovery. If you are doing a non packaged update I suggest installing the rom one first, modems and recoveries are a lot faster install.
If you are repartitioning put the pit file in the (Pit) section,verify repartition is checked.
Plug your phone into a USB slot, then hold the volume down hard key on the side of the phone. You should see a yellow triangle with a construction droid on your phones screen, and a box on the left right above options (ID:COM) is now yellow.
Now you are in download mode, verify check box next to PDA is checked and the block has the file location in it. Make sure Repartition (unless you are repartitioning and have the pit file in place), Dump, Phone EFS clear, and Bootloader, Phone Bootloader Update, and Flash Lock are NOT CHECKED in the Options section. Auto Reboot and F. Reset Time can be checked or not it doesn't really matter with the battery out. These are the default settings in the options section but double check it anyway.
You are ready to go, click start, and let odin run, it can take anywhere from just a minute to around a half hour. If anything happens like your computer shuts off, you accidentally unplug your phone from your PC, or download failed. Don't freak, just do it again from step one, sometimes it takes multiple attempts to get it. I think at six failed attempts in a row it may be time to look into heimdall, the walk through for that is below this one.
Once odin finishes and does its test you will get a green box lit up that says Pass in it just above where you saw the yellow box showing you were connected. Congratulations on a successful recovery. reinstall your battery and the back cover, reboot your phone and wait for it to boot up. The boot process can take several minutes so be patient. If the boot was successful you should be looking at a stock bloated Verizon Fascinate, that is asking you to back up your system and log into Gmail.
Fascinate USB driver from Samsung, just in case you need it.
Sch-i500 USB driver
odin v1.3
odin v1.7
odin v1.83
Atlas v2.2 Pit file
DI01All in 1
EB01All in 1
ODIN CWM ED01 Stock ROM/Kernel/Recovery Courtesy of Imnuts
ODIN ED03 ROM/Kernel/Recovery Courtesy of Imnuts
MODEM ODIN CWM DL09, EA28, ED01, ED03 modems without ridiculous 100MB OTAs Courtesy of Comradesven (I can now say this works and is easy to do just folloy the instrictions on thread.) Decided to try out this method after bricking my phone again, EASY AND FAST, love it.
EC09 Gingerbread Leak CAUTION:It has not happened to me yet even after several times of flashing something custom and using this to odin back to stock with, but there are many reports of this corrupting users SD cards. This is a leak and as always USE THIS AT YOUR OWN RISK!!
Here are the ONLY TWO, as far as we know guaranteed to get you fixed up, odin files, for anyone coming from CM7 or MUI MTD for the Fascinate.
YOU MUST USE THE ATLAS V2.2 PIT FILE, ONE OF THESE FILES, AND REPARTITION. IF YOU DON'T ODIN WILL FAIL TO COMPLETE THE RECOVERY.
CI500_VZW_DL09_ECLAIR
CI500_VZW_EB01_FROYO
SECTION 2: HEIMDALL
Now for the heimdall walk through, so follow along. I don't think it is possible to completely brick this phone short of actually smashing it, why take unnecessary chances.
First go to the link for heimdall. Download, unzip this and open the folder. In this folder you will find another folder labeled Drivers, open it and you will see a program called zadig.
Now put your Phone into download mode, that is remove the back cover, take out the battery and plug it into your PC with the OEM cable (the one that came with the phone when you got it), then press and hold the down volume button till a yellow triangle and construction droid , now you are in download mode.
Double click zadig and when it opens, click on options and click list all devices. Now drop the usb drop down box and you will find an option for SAMSUNG android composite ADB device, or Samsung composite usb driver, select it then click install drivers. the usual install stuff from windows about do you want to install this, yes you do. Now If the warning about publisher could not be verified, whatever, install it anyway, no it's not a virus. Your phone MUST be in download mode or zadig will not have the USB you need as an available option.
Now you need the files for this program to install and recover your phone. I was motivated to set up a zip file for download with files ready due to confusion on how to accomplish this step, you will find links below.
Now back into the heimdall file you opened earlier you will need to double click the heimdall.exe file, and click run on the windows pop up, it will show a cmd prompt type screen then disappear shortly after, it's supposed to do that.
Again in the click the application called heimdall-frontend. here is where you can go wrong so I will do this side by side with heimdall names and DI01/EB01 file names. I don't believe there are currently any other full recoveries.
To eliminate confusion on where to put your files follow the guige below.
Heimdall on this side of =Recovery file names on this side.
In Repartition:
PIT = atlas_v2.2.pit see below.
In PDA/Code:
FactoryFS=factoryfs.frs
Kernel(zImage)=zImage
Param.lfs=param.lfs
Primary Bootloader=boot.bin
Secondary Bootloader=slb.bin
In CSC:
Cache=cache.rfs
Database Data=dbdata.rfs
In Other:
Modem=modem.bin
Recovery=recovery.bin
Now that all the are files loaded into the correct spots, the necessary drivers installed, and phone in download mode, the start button will be able to be clicked, not shaded outlines like before, did you even notice that? If you followed everything in this tutorial step by step, click the START button and let heimdall run. After it finishes reboot your Verizon stock, Bing bloated, WORKING Fascinate. After this is completed successfully you will be able to use odin again if you need or want to.
Heimdall
DI01 heimdall package
EB01 heimdall package
Why did this happen?
Why was this necessary, as far as I can find out, through research, I wont even try to figure out how many times I had to odin ,and the eight, yes that's right I said 8, times I have HAD to use heimdall, because my phone would not recover through odin. Usually because like me you flashed a rom on for a different phone or, it seems to be, dbdata or another partition can not mount. This has happened to me because I didn't remove voodoo, or flashed a pre edify rom after accidently putting cwr3, which is for edify, on a non edify rom. So moral of the story is twofold, yes it is very likely it can be fixed, and remove voodoo before going to nonvoodoo, and make sure you have a version of cwr that supports both ammend and edify script if you are not sure. Don't flash a rom for a different phone on your Verizon Fascinate or you most likely WILL need heimdall.
NEVER USE A FILE, ROM, KERNEL, ANYTHING, THAT IS NOT CLEARLY FOR THE VERIZON FASCINATE.
Remember, thank the developers by clicking the thanks button on threads you find helpful, they did the work. All I did was take some time and put together all the links and processes I have read and had to learn. Some of the walk through threads are well written by the Dev's and some were hard for me to follow. Sometime I wonder if our Dev's forget that us mere mortals have no idea what they are talking about, and I pride myself on being much better than average with computers and software. That said if you have trouble working e mail and office, I think it's fair to say you would be lost. I hope this is easy to follow and always successful for you. Better yet I hope you never need this.
READ:If heimdall, or odin fail, but you can still get into download mode, do it again, and keep trying while you look for further assistance on this site. If you can't get into download mode with your phone plugged into your PC, unplug usb from PC and plug it into the wall outlet, and try to put it into download mode there. When It goes into download mode, unplug usb from adapter, plug it into PC and put it into download mode, This does work.
If this has Helped you not have a $600 dollar paperweight, consider donating to some of our Dev's working so hard to not only give you better than what big red and sammy gave you, but also a way to fix your mistakes without the need for an insurance claim. Isn't it worth a few bucks to support the developers who save you from the insurance deductable? Think about that before you complain about the devs.
SECTION 3: ROOTING METHODS
Here are two easy ways to accomplish rooting your phone.
ROOTING YOUR PHONE VOIDS YOUR WARRANTY. I NOR ANYONE ELSE WILL BE RESPONSIBLE FOR ANYTHING YOU CHOOSE TO DO. NO ONE HERE IS MAKING YOU DO ANYTHING, JUST PROVIDING INFORMATION ON WAYS TO ACCOMPLISH WHAT YOU WANT TO DO.
Super One Click method: unzip file, open file, double click ADB, it will show a quick cmd like window. Now make sure you phone has USB debugging enabled, connect to PC, don't mount USB. Click the SuperOneClick.exe icon and let it run. If it fails run it again, sometimes it does that. If anything pops up on the screen, read and answer. Unless you are using a Captivate leave the Captivate tab alone it is for getting an unlock code and you don't need that for your Fascinate. (works on all fascinate stock OS to include ED03, and EC09 GB, tested by me.)
CWR & SU Method: (DOES NOT WORK ON 2.2.1) Put superuser.zip zip file on root of SD card, odin in cwr, boot phone into recovery by holding power and volume at same time. To do this simply install battery after unpluging from PC press and hold power and volume buttons at the same time. DO NOT let the phone boot as far as the Samsung logo or you will have to odin in cwr again. Go to Install zip, choose zip, install from SD card. Find your superuser.zip file and install it. Reboot, you are rooted, install busybox, free from market if necessary. If you need odin or instruction on using it, see section 1.
GINGERBREAK Method: Gingerbreak v1.20.apk is an easy to do method, put the apk on your sd card, install from file manager, run it.
KEEPING CWR3 IN 2.2.1: To keep CWR on any ED OTA release you need to make some adjustments to a few files. Don't worry I am going to tell you which ones, and I suggest a simple method of adding .no to the end of the file. That way if you ever need to undo it, simply go back in and remove the .no and your not trying to remember what the file name and extension was. Now here are the file names for each file, you will need something like root explorer and a rooted Fascinate to do this, and you can't rename a file unless you tap the mount system as r/w not r/o, its easy here are the examples of how I did it.
/system/recovery-from-boot.p becomes /system/recovery-from-boot.p.no
/system/bin/recovery becomes /system/bin/recovery.no
/system/etc/install-recovery.sh becomes /system/etc/install-recovery.sh.no
Superuser+busybox
CWR 3/30 Fix all
CWR3 Voodoo.tar Blue
times_infinity's recoveries
Gingerbreak v1.20
Special thanks to Adrynalyne, Imnuts, Jt1134, Nitsuj17, Landshark, Sbrissen, ChainsDD, Times Infinity, and Comradesven and anyone I forgot to thank, for creating and sharing, the heimdall, odin, and other files.
This is a great source of information. The formatting could be a little better though. Perhaps break up those great giant paragraphs a bit. It would be easier to follow along. Especially for noobs in a panic state after "bricking" their phone.
Great work though. This should be stickied.
I will Update thread to an easier format over the next few days. Thanks for the tip, i looked good to me but now i see what you are talking about. It took hours today to gather all the info, pull up each program ans walk through it. I guess I was in mental overload.
Attempted Heimdall today after odin has failed using the EB01, error was "Failed to retrieve config descriptor" any ideas?
If I flash with all CSC options unchecked the flash is successful.
When trying to boot after flash without CSC i receive a phone and a computer with a dotted line connecting the to on power up. Phone will return to DL mode.
Also attempted to flash DL01, it seems there are several files that correspond with Heim that are not in the package are the EB01 files interchangeable with the missing files?
Not trying to be that guy, but the DL01 is actually DI01. The build number DL01 doesnt exist.
Sent from my SCH-I500 using XDA App
times_infinity said:
Not trying to be that guy, but the DL01 is actually DI01. The build number DL01 doesnt exist.
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
You were that guy.
times_infinity said:
Not trying to be that guy, but the DL01 is actually DI01. The build number DL01 doesnt exist.
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
Oops, but at least i was consistant on the typo...LOL. I will fix it this weekend.
I just got a fascinate.....commingle from a vibrant.....I can't find a root method that doesn't include a computer,my previous phone I downloaded update.zip went into recovery and bammo rooted then have spent the last unknown amount of time playing with the Roms and now want the same. With this phone anyone help? Thanks.
Sent from my SGH-T959 using XDA Premium App
Figured out this morning I wasnt using my factory usb cable switched cables odin'd stock eb01 worked perfectly now I feel retarded.
Sent from my SCH-I500 using XDA App
Excellent write up. Thanks a bunch.
What are some other differences in Odin 1.7 vs 1.3? I have used 1.3 many times and never had any issues. Any improvements?
Thanks so much Dale! headed to work now, but will try this tonight
Rayn1328 said:
I just got a fascinate.....commingle from a vibrant.....I can't find a root method that doesn't include a computer,my previous phone I downloaded update.zip went into recovery and bammo rooted then have spent the last unknown amount of time playing with the Roms and now want the same. With this phone anyone help? Thanks.
Sent from my SGH-T959 using XDA Premium App
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=897889 you pretty much need a computer. z4root worked at one time iirc I used it on my fascinate at some point.
More reasons as to why you should never fear bricking your phone and testing new kernels and ROMs. Thank you for the thorough tutorial.
cbalt said:
http://forum.xda-developers.com/showthread.php?t=897889 you pretty much need a computer. z4root worked at one time iirc I used it on my fascinate at some point.
Click to expand...
Click to collapse
I prefer what i think is a much simpler method. Just go to this link and follow Post 2. I don't believe I have ever had it so easy to root a phone:
http://forum.xda-developers.com/showthread.php?t=948722
nice write up, thanks for posting. I hope I never have to use it
netwalker0099 said:
Attempted Heimdall today after odin has failed using the EB01, error was "Failed to retrieve config descriptor" any ideas?
If I flash with all CSC options unchecked the flash is successful.
When trying to boot after flash without CSC i receive a phone and a computer with a dotted line connecting the to on power up. Phone will return to DL mode.
Also attempted to flash DL01, it seems there are several files that correspond with Heim that are not in the package are the EB01 files interchangeable with the missing files?
Click to expand...
Click to collapse
Got that once cause i didn't install the drivers in zadig. I installed it, didn't reboot PC, worked fine. If you had the CSC unchecked then you didnt install a cache or database, so no your phone wont work like that. Unless you ran into something new, follow this guide step by step, and it should work. I would also make sure you get the files from here, they are tested and known to be good. There are some incomplete, and bad files out there, these work.
Heimdall is officially the greatest piece of software ever created and DaleV is my hero!!! FINALLY have my phone up and running again! Was serious contemplating dropping around $300 for a new phone on Craigslist.
Trying to root a Fascinate, and it showed up in ODIN once, then the flash failed. Now it's in download mode and not showing up in ODIN, any ideas?
Oxirane said:
Trying to root a Fascinate, and it showed up in ODIN once, then the flash failed. Now it's in download mode and not showing up in ODIN, any ideas?
Click to expand...
Click to collapse
after it failed did you unplug then replug and go back into download mode? also I updated the OP with a superuser.zip file it works better than the one in the market for showing you have root access, I have no idea why.
Also you might try a different usb port, sometimes that does the trick.
I've unplugged and replugged and rebooted it a dozen times... it first goes to 2e recovery, then I reinstall packages and it reboots to the simplified download mode with just basic little icons. Doesn't get recognized by the computer though. :/
Wont boot into anything but 2e, and from there into oldschool download mode.
I had my girlfriend's fascinate running MIUI and then I flashed CM7. When I booted into recovery it took me into the red one and now I can't do anything. I'm always getting errors. How can I get back to the blue recovery or what can I do?
I can't get past the Glitch screen it just stays on there
Please help
want a droid said:
I had my girlfriend's fascinate running MIUI and then I flashed CM7. When I booted into recovery it took me into the red one and now I can't do anything. I'm always getting errors. How can I get back to the blue recovery or what can I do?
I can't get past the Glitch screen it just stays on there
Please help
Click to expand...
Click to collapse
Odin the proper clockwork,reboot straight to it, wipe data and then flash CM7 from the SD card.
Please give me step by step instructions with links. I'm an HTC Thunderbolt guy myself so I am having a hard time finding all the right links and stuff. I really appreciate your help!
First sticky in this forum has all the links and steps.
Sent from my SCH-I500 using Tapatalk
I tried flashing the fix all recovery and it's still not working. Again, I appreciate your guy's help.
want a droid said:
I tried flashing the fix all recovery and it's still not working. Again, I appreciate your guy's help.
Click to expand...
Click to collapse
Really? did you look at the sticky?
Code:
HOW TO UN-BRICK YOUR FASCINATE NOW THAT YOU HAVE BRICKED IT
SINCE IT HAS COME TO MY ATTENTION SOME POEPLE ARE CONFUSED ABOUT WHAT PHONE THIS IS FOR, I WILL MAKE IT AS CLEAR AS POSSIBLE
THIS IS FOR THE VERIZON FASCINATE
So you think you bricked your phone? The first thing you need to do is CALM DOWN, NO NEED TO PANIC , the odds are great that following this guide will fix your mistakes and recover your phone.
Sorry Fascinate owners, but I can no longer support this thread. As state below I test everything I post to make sure it works as advertised. I no longer have a fascinate so i can not test anything new. All of the files, I cant guarantee links to other OP's, will still be available, I wont take them down. Your recovery methods have not changed, nor have the PIT files, so this can still be used to recover your device. If you are looking for anything new look at nitsuj17's roll up post here, he maintains it very well so you should be able to find whatever else you need there.
I HAVE PURPOSELY BRICKED MY PHONE BY DOING THE THINGS YOU ARE TOLD NOT TO JUST TO TEST THE CAPABILITIES OF THESE RECOVERY PROGRAMS. UNLESS YOU CAN AFFORD TO HAVE YOUR PHONE REPLACED BY INSURANCE, TRUST THAT I KNOW WHAT I AM TALKING ABOUT.
SECTION 1: ODIN
SECTION 2: HEIMDALL
SECTION 3: ROOTING METHODS
Since there seems to be an abundance of posts in the Q&A and General Forums asking for help fixing, unbricking, their Fascinates, I decided to try to make a one stop walk through for odin and heimdall with links. Most of us "flash addicts", Developers, and testers have found the Samsung Galaxy Phones are nearly impossible to truly brick without causing physical damage to your phone, in almost all cases it is possible to get it working again.This is nothing more than how to get back a working STOCK phone, nothing custom here that's in the Development section. The first section will cover odin, the second heimdall, the third recovery and rooting.
USUAL WARNING: Everything here is done at your own risk. None of us on the XDA Developers site are responsible in any way, after all we didn't brick it you did. Doing any of this is your decision, I am just providing a collection of information. All credit for everything here belongs to others, who worked hard to give you a way to fix your mistakes, and it usually is the owner of the device trying something without learning how first, or not following directions that got you here in the first place.
My Phone wont boot at all, is stuck at logo, or I cant do anything with it is it a paperweight?
Most likely, no, so lets get to fixing it. All download links necessary for each process will be posted in this walk through and have been tested to make sure they work.
SECTION 1: ODIN
Everything except for the pit file in odin MUST be done in the PDA slot, if not it will not work requiring you to odin again, or possibly have to use heimdall (covered later in this thread) to fix that. After you download odin, I use v1.83 but I will provide all versions I have.
First you need to decide if you want to go all the way back to DI01 (Android 2.1 "Eclair") or EB01, EC01, or a little more involved process for ED01, or ED03 (android 2.2 "Froyo") it makes all the difference with the files you need. The pit file is not necessary for most recoveries, but I have included due to a few issues that will require you to completely wipe everything but your SD card and start over. All of this is possible thanks to our talented developers. After you have odin and all the files you need on your Windows Vista or Win 7 PC, This DOES NOT work on XP, I have had a lot of responses to support this, so lets go with it won't work use Vista or Win 7. To load any file you click that button and use the windows explorer pop up to find your file select it and click open at the bottom of the window.
Start by powering off phone, the pull out battery.
Open odin and load your file in PDA and ONLY THE PDA (downloads) section, If you knew enough about this program to use the other areas you would not need this walk through, soPDA and ONLY THE PDA (downloads) section, for an, all in 1 Recovery. If you are doing a non packaged update I suggest installing the rom one first, modems and recoveries are a lot faster install.
If you are repartitioning put the pit file in the (Pit) section,verify repartition is checked.
Plug your phone into a USB slot, then hold the volume down hard key on the side of the phone. You should see a yellow triangle with a construction droid on your phones screen, and a box on the left right above options (ID:COM) is now yellow.
Now you are in download mode, verify check box next to PDA is checked and the block has the file location in it. Make sure Repartition (unless you are repartitioning and have the pit file in place), Dump, Phone EFS clear, and Bootloader, Phone Bootloader Update, and Flash Lock are NOT CHECKED in the Options section. Auto Reboot and F. Reset Time can be checked or not it doesn't really matter with the battery out. These are the default settings in the options section but double check it anyway.
You are ready to go, click start, and let odin run, it can take anywhere from just a minute to around a half hour. If anything happens like your computer shuts off, you accidentally unplug your phone from your PC, or download failed. Don't freak, just do it again from step one, sometimes it takes multiple attempts to get it. I think at six failed attempts in a row it may be time to look into heimdall, the walk through for that is below this one.
Once odin finishes and does its test you will get a green box lit up that says Pass in it just above where you saw the yellow box showing you were connected. Congratulations on a successful recovery. reinstall your battery and the back cover, reboot your phone and wait for it to boot up. The boot process can take several minutes so be patient. If the boot was successful you should be looking at a stock bloated Verizon Fascinate, that is asking you to back up your system and log into Gmail.
Fascinate USB driver from Samsung, just in case you need it.
Sch-i500 USB driver
odin v1.3
odin v1.7
odin v1.83
Atlas v2.2 Pit file
DI01All in 1
EB01All in 1
ODIN CWM ED01 Stock ROM/Kernel/Recovery Courtesy of Imnuts
ODIN ED03 ROM/Kernel/Recovery Courtesy of Imnuts
MODEM ODIN CWM DL09, EA28, ED01, ED03 modems without ridiculous 100MB OTAs Courtesy of Comradesven (I can now say this works and is easy to do just folloy the instrictions on thread.) Decided to try out this method after bricking my phone again, EASY AND FAST, love it.
EC09 Gingerbread Leak CAUTION:It has not happened to me yet even after several times of flashing something custom and using this to odin back to stock with, but there are many reports of this corrupting users SD cards. This is a leak and as always USE THIS AT YOUR OWN RISK!!
Here are the ONLY TWO, as far as we know guaranteed to get you fixed up, odin files, for anyone coming from CM7 or MUI MTD for the Fascinate.
YOU MUST USE THE ATLAS V2.2 PIT FILE, ONE OF THESE FILES, AND REPARTITION. IF YOU DON'T ODIN WILL FAIL TO COMPLETE THE RECOVERY.
CI500_VZW_DL09_ECLAIR
CI500_VZW_EB01_FROYO
SECTION 2: HEIMDALL
Now for the heimdall walk through, so follow along. I don't think it is possible to completely brick this phone short of actually smashing it, why take unnecessary chances.
First go to the link for heimdall. Download, unzip this and open the folder. In this folder you will find another folder labeled Drivers, open it and you will see a program called zadig.
Now put your Phone into download mode, that is remove the back cover, take out the battery and plug it into your PC with the OEM cable (the one that came with the phone when you got it), then press and hold the down volume button till a yellow triangle and construction droid , now you are in download mode.
Double click zadig and when it opens, click on options and click list all devices. Now drop the usb drop down box and you will find an option for SAMSUNG android composite ADB device, or Samsung composite usb driver, select it then click install drivers. the usual install stuff from windows about do you want to install this, yes you do. Now If the warning about publisher could not be verified, whatever, install it anyway, no it's not a virus. Your phone MUST be in download mode or zadig will not have the USB you need as an available option.
Now you need the files for this program to install and recover your phone. I was motivated to set up a zip file for download with files ready due to confusion on how to accomplish this step, you will find links below.
Now back into the heimdall file you opened earlier you will need to double click the heimdall.exe file, and click run on the windows pop up, it will show a cmd prompt type screen then disappear shortly after, it's supposed to do that.
Again in the click the application called heimdall-frontend. here is where you can go wrong so I will do this side by side with heimdall names and DI01/EB01 file names. I don't believe there are currently any other full recoveries.
To eliminate confusion on where to put your files follow the guige below.
Heimdall on this side of =Recovery file names on this side.
In Repartition:
PIT = atlas_v2.2.pit see below.
In PDA/Code:
FactoryFS=factoryfs.frs
Kernel(zImage)=zImage
Param.lfs=param.lfs
Primary Bootloader=boot.bin
Secondary Bootloader=slb.bin
In CSC:
Cache=cache.rfs
Database Data=dbdata.rfs
In Other:
Modem=modem.bin
Recovery=recovery.bin
Now that all the are files loaded into the correct spots, the necessary drivers installed, and phone in download mode, the start button will be able to be clicked, not shaded outlines like before, did you even notice that? If you followed everything in this tutorial step by step, click the START button and let heimdall run. After it finishes reboot your Verizon stock, Bing bloated, WORKING Fascinate. After this is completed successfully you will be able to use odin again if you need or want to.
Heimdall
DI01 heimdall package
EB01 heimdall package
Why did this happen?
Why was this necessary, as far as I can find out, through research, I wont even try to figure out how many times I had to odin ,and the eight, yes that's right I said 8, times I have HAD to use heimdall, because my phone would not recover through odin. Usually because like me you flashed a rom on for a different phone or, it seems to be, dbdata or another partition can not mount. This has happened to me because I didn't remove voodoo, or flashed a pre edify rom after accidently putting cwr3, which is for edify, on a non edify rom. So moral of the story is twofold, yes it is very likely it can be fixed, and remove voodoo before going to nonvoodoo, and make sure you have a version of cwr that supports both ammend and edify script if you are not sure. Don't flash a rom for a different phone on your Verizon Fascinate or you most likely WILL need heimdall.
NEVER USE A FILE, ROM, KERNEL, ANYTHING, THAT IS NOT CLEARLY FOR THE VERIZON FASCINATE.
Remember, thank the developers by clicking the thanks button on threads you find helpful, they did the work. All I did was take some time and put together all the links and processes I have read and had to learn. Some of the walk through threads are well written by the Dev's and some were hard for me to follow. Sometime I wonder if our Dev's forget that us mere mortals have no idea what they are talking about, and I pride myself on being much better than average with computers and software. That said if you have trouble working e mail and office, I think it's fair to say you would be lost. I hope this is easy to follow and always successful for you. Better yet I hope you never need this.
READ:If heimdall, or odin fail, but you can still get into download mode, do it again, and keep trying while you look for further assistance on this site. If you can't get into download mode with your phone plugged into your PC, unplug usb from PC and plug it into the wall outlet, and try to put it into download mode there. When It goes into download mode, unplug usb from adapter, plug it into PC and put it into download mode, This does work.
If this has Helped you not have a $600 dollar paperweight, consider donating to some of our Dev's working so hard to not only give you better than what big red and sammy gave you, but also a way to fix your mistakes without the need for an insurance claim. Isn't it worth a few bucks to support the developers who save you from the insurance deductable? Think about that before you complain about the devs.
SECTION 3: ROOTING METHODS
Here are two easy ways to accomplish rooting your phone.
ROOTING YOUR PHONE VOIDS YOUR WARRANTY. I NOR ANYONE ELSE WILL BE RESPONSIBLE FOR ANYTHING YOU CHOOSE TO DO. NO ONE HERE IS MAKING YOU DO ANYTHING, JUST PROVIDING INFORMATION ON WAYS TO ACCOMPLISH WHAT YOU WANT TO DO.
Super One Click method: unzip file, open file, double click ADB, it will show a quick cmd like window. Now make sure you phone has USB debugging enabled, connect to PC, don't mount USB. Click the SuperOneClick.exe icon and let it run. If it fails run it again, sometimes it does that. If anything pops up on the screen, read and answer. Unless you are using a Captivate leave the Captivate tab alone it is for getting an unlock code and you don't need that for your Fascinate. (works on all fascinate stock OS to include ED03, and EC09 GB, tested by me.)
CWR & SU Method: (DOES NOT WORK ON 2.2.1) Put superuser.zip zip file on root of SD card, odin in cwr, boot phone into recovery by holding power and volume at same time. To do this simply install battery after unpluging from PC press and hold power and volume buttons at the same time. DO NOT let the phone boot as far as the Samsung logo or you will have to odin in cwr again. Go to Install zip, choose zip, install from SD card. Find your superuser.zip file and install it. Reboot, you are rooted, install busybox, free from market if necessary. If you need odin or instruction on using it, see section 1.
GINGERBREAK Method: Gingerbreak v1.20.apk is an easy to do method, put the apk on your sd card, install from file manager, run it.
KEEPING CWR3 IN 2.2.1: To keep CWR on any ED OTA release you need to make some adjustments to a few files. Don't worry I am going to tell you which ones, and I suggest a simple method of adding .no to the end of the file. That way if you ever need to undo it, simply go back in and remove the .no and your not trying to remember what the file name and extension was. Now here are the file names for each file, you will need something like root explorer and a rooted Fascinate to do this, and you can't rename a file unless you tap the mount system as r/w not r/o, its easy here are the examples of how I did it.
/system/recovery-from-boot.p becomes /system/recovery-from-boot.p.no
/system/bin/recovery becomes /system/bin/recovery.no
/system/etc/install-recovery.sh becomes /system/etc/install-recovery.sh.no
Superuser+busybox
CWR 3/30 Fix all
CWR3 Voodoo.tar Blue
times_infinity's recoveries
Gingerbreak v1.20
Special thanks to Adrynalyne, Imnuts, Jt1134, Nitsuj17, Landshark, Sbrissen, ChainsDD, Times Infinity, and Comradesven and anyone I forgot to thank, for creating and sharing, the heimdall, odin, and other files.
Everything you need can be found here: http://forum.xda-developers.com/showthread.php?t=1026746
odin...
atlas_v2.2.pit
CI500_VZW_ED05_FROYO_REL.tar.md5
check repartition
then follow the CM wiki
I don't understand why I'm getting this: http://imgur.com/WkDsK
Sorry for rotated picture.
I'm in the process of flashing the verizon firmware but it's taking forever to download. I thought I could just odin the CWM?
You better do some research before u brick ur ****...there are guides all over the place on how to get back to stock/flash roms. And last but not least all questions should be posted in the q&a section...that's what its there for...seriously use it!
Ok I flashed Verizon firmware, then did the CM Wiki steps, but for some reason my recovery is acting funky.
When I try to connect it to my mac it says it can't read what I'm trying to connect. When I connected it to windows laptop it says its a CD drive that is write protected.
I can't move any files in or out. Also when I try to flash a rom zip in recovery it doesn't work.
I'm in the process of trying to restore her MIUI backup. Here's to hoping that works.
EDIT: Supposedly the restore worked, but here is part of the error that showed when trying to flash a zip (top text): http://imgur.com/X1RQL
Oh and I'm stuck on the Samsung screen now...what do I do?
want a droid said:
Ok I flashed Verizon firmware, then did the CM Wiki steps, but for some reason my recovery is acting funky.
Click to expand...
Click to collapse
fail.
if you did CM Wiki, you have CWM 4.X, not 2 or 3
you need to flash back to stock like i said
I did flash back to stock. Anyways in the broken clockwork recovery I decided to try and install MIUI again and when I clicked it it took me to an orange recovery.
Then I flashed her backup and it loaded up fine. Hopefully everything is back to the way it was. I'm not sure what ever went wrong in the first place.Thanks for your help.
Dude...sounds like you just made it hard. Its actually quite simple.
Pull battery, put in download mode.
Odin the Verizon firmware with atlas.pit and repartition checked.
let it boot, then shut it back down and go back into download mode and Odin the fixed recovery for CM7. Then flash MIUI and profit.
It shouldn't take but about 15 minutes out so for the whole process
Swyped via Tapatalk
Well I wish you had been here last night. I was told to do the heimdall thing and then after all that the phone wouldn't be recognized in odin.
It was a frustrating 3 hour long process (granted ~1h was waiting for the 441MB file to download).
so I found this thread searching through the fascinate forums and i gotta say, it saved my ass. I used heimdall 1.3.1 and it wasn't working right for the flash. IDK why but when I tried 1.1.1 it worked first try to flash back to stock after brick. I used the eh03_full_odin.zip file in heimdall and it quick and easy to get back to stock =] this forum rox!!