Hello!
Even though my post count indicates that I'm a newbie, I am not! So don't rant and call me one and that I should read better or what not!
After having the Insertcoin ROM for a while, I decided flashing Virtuous Unity today, because it seems more stable and smooth. So I downloaded the latest (1.27), and followed the instructions. I used ROM Manager (never used that before, always flashed through CWM Recovery, but, what the heck, ROM Manager seemed faster and easier for this one).
Now, after flashing it thru ROM Manager, it rebooted into CWM. All looked fine until that point. (at least, I thought). I selected Reboot now in the CWM menu, and it rebooted into HTC logo. After a minute, it went back to Recovery! And, it keeps doing that! I've had a bootloop before, but not into Recovery??
I tried rebooting into HBOOT, even manual reboot in ADB. Nothing works! I also tried flashing again, but that also failed. The problem reoccurs. Then I read it might have something to do with 1.27 version.
So I downloaded 1.25, and pushed it thru ADB on the sdcard. But, now I cant find it anywhere when I select Install ZIP from SDcard in CWM.
I'm a little bit confused, so please help me heheh
Thanks!
I fixed it, sorry for the useless topic... May be deleted!
(I got me another SD card and tried the 1.25.)
I'm guessing the reason 1.27 didn't work is because you have the G2 hboot, and unity now requires all vision users to have the DZ hboot, instructions on how to change can be found here
Well, I doubt that, since I have an HTC Desire Z and not the G2..? So I should already have the DZ Hboot right?
Sent from my HTC Vision using XDA App
Not necessarily, I had the G2 hboot on my DZ for about 6 months. And only changed when RMK posted his guide.
If you go in to the bootloader it will either say. 0.84.2000 (DZ) or 0.76.0000 (G2)
And don't use ROM manager, it may seem to make things quicker and easier but it never works as well as doing everything manually in CWM.
I will check which one I have... And for Rom manager, I never used it but on the virtuous site they recommended it so I thought it might work better... It didn't hahah
EDIT: well, it turns out i have the 0.76 version xD my bad! That explains tho!
Sent from my HTC Vision using XDA App
You need the Desire Z hboot, you can find it by googling around, it doesn't matter if you have the G2 or DZ I the G2 with DZ hboot, and I'm running Virtuous 1.26.0
Sent from my HTC Vision using XDA App
cjward23 said:
Not necessarily, I had the G2 hboot on my DZ for about 6 months. And only changed when RMK posted his guide.
If you go in to the bootloader it will either say. 0.84.2000 (DZ) or 0.76.0000 (G2)
And don't use ROM manager, it may seem to make things quicker and easier but it never works as well as doing everything manually in CWM.
Click to expand...
Click to collapse
and what about 0.85.0005. Is it a "classic" hboot ? for DZ or G2 ? Thanks !
GuiPoM said:
and what about 0.85.0005. Is it a "classic" hboot ? for DZ or G2 ? Thanks !
Click to expand...
Click to collapse
That is the hboot that the DZ ships with
Thanks ! I had searched for hours this information !
Related
Phandroid is reporting the official G2 gingerbread ROM has been leaked, anyone been brave enough to try it out?
link removed because i'm a new user and it won't let me post it
Um it's in the development thread. Did you look?
Sent from my HTC Vision using XDA Premium App
Been out yesterday posted by football and yes it gave my soft brick a revival!!
david279 said:
Um it's in the development thread. Did you look?
Sent from my HTC Vision using XDA Premium App
Click to expand...
Click to collapse
Just saw that thread ( http://forum.xda-developers.com/showthread.php?t=1074852 ). I wasn't quite sure why a final T-mo rom would be in the development forum, seems a little counter intuitive? I guess the dev forum really means the rom forum. anyway, thanks guys.
izzelsizzel said:
Just saw that thread ( http://forum.xda-developers.com/showthread.php?t=1074852 ). I wasn't quite sure why a final T-mo rom would be in the development forum, seems a little counter intuitive? I guess the dev forum really means the rom forum. anyway, thanks guys.
Click to expand...
Click to collapse
step back and think about it.....
wouldnt you want a rom dev to get their hands on it to work their magic?
izzelsizzel said:
guess the dev forum really means the rom forum. anyway, thanks guys.
Click to expand...
Click to collapse
Its got a lot more than just ROMs, but also kernels, radios, guides, and other tools. Some stuff are custom or modded, some are stock tools that developers and others will find useful.
Please help -- how to flash this new stock gingerbread rom to a rooted g2
I have a rooted G2 running CM7, but the gps is totally dead. I'm too much of a noob to flash a new radio, which I think would do the trick. Flashing this stock gingerbread rom seems like the perfect solution because it includes an updated radio and i am just sure it will fix the gps problem.
I bought the phone rooted and I know how to flash new rooted roms through clockwork (so easy), but I have absolutely no idea how to flash a rom like this that updates everything.
I'm sure this question has been asked here before, but can someone just point me to a step-by-step instructions about how to flash this particular stock gingerbread rom to a g2 that is rooted and has clockwork installed?
Thanks~! This is my first post.
sship said:
I have a rooted G2 running CM7, but the gps is totally dead. I'm too much of a noob to flash a new radio, which I think would do the trick. Flashing this stock gingerbread rom seems like the perfect solution because it includes an updated radio and i am just sure it will fix the gps problem.
I bought the phone rooted and I know how to flash new rooted roms through clockwork (so easy), but I have absolutely no idea how to flash a rom like this that updates everything.
I'm sure this question has been asked here before, but can someone just point me to a step-by-step instructions about how to flash this particular stock gingerbread rom to a g2 that is rooted and has clockwork installed?
Thanks~! This is my first post.
Click to expand...
Click to collapse
Flashing a radio is easy. Just follow the steps in the radio thread:
http://forum.xda-developers.com/showthread.php?t=970809
I know the second method (fastboot and radio.img files) is supposed to be safer. But that looks like it might be over your head, and you need the Eng Hboot to do it.
Flashing a ROM is easy, too. Just move the file to your SD card, and flash from ROM Manager. You will see an option "Install ROM from SD Card". Browse to the file, and the rest is the same as if you downloaded the ROM using ROM Manager.
Thanks, but a few more questions . . .
redpoint73 said:
Flashing a ROM is easy, too. Just move the file to your SD card, and flash from ROM Manager. You will see an option "Install ROM from SD Card". Browse to the file, and the rest is the same as if you downloaded the ROM using ROM Manager.
Click to expand...
Click to collapse
Thanks for the reply! I think you are underestimating how new I am to this, though. My question is really this: does it matter, when flashing the new gingerbread rom for g2 that just came out, that the rom is not just a rom, but also a radio and everything else? it is titled in the "PC10IMG" form, which seems to me, from reading other threads, to be a special thing.
[full title: PC10IMG_Vision_Gingerbread_S_TMOUS_2.13.531.8_Radio_12.52.60.25_26.08.04.30_M3_release_188635_signed]
also, would you recommend that i wipe stuff before flashing? when the person who flashed my phone with me last time did it, he wiped dalvik cache and two others (can't remember which, or where he found them in recovery), and user data as well. but if you go to do it within clockwork, it doesn't ask you to do that, does it? again, i'm sure there is a thread about this somewhere.
sorry sorry to be so new to this! and thanks a ton for the help.
sship said:
Thanks for the reply! I think you are underestimating how new I am to this, though. My question is really this: does it matter, when flashing the new gingerbread rom for g2 that just came out, that the rom is not just a rom, but also a radio and everything else? it is titled in the "PC10IMG" form, which seems to me, from reading other threads, to be a special thing.
[full title: PC10IMG_Vision_Gingerbread_S_TMOUS_2.13.531.8_Radio_12.52.60.25_26.08.04.30_M3_release_188635_signed]
also, would you recommend that i wipe stuff before flashing? when the person who flashed my phone with me last time did it, he wiped dalvik cache and two others (can't remember which, or where he found them in recovery), and user data as well. but if you go to do it within clockwork, it doesn't ask you to do that, does it? again, i'm sure there is a thread about this somewhere.
sorry sorry to be so new to this! and thanks a ton for the help.
Click to expand...
Click to collapse
well, it's a bit complicate.
supposedly the rom will return your phone to a totally stock state, which will give you the new radio etc, but you will not have root - this was already confirmed. One other forum member mentioned that he flashed the rom and did not loose S-OFF, which is a controversy...
update: lol, dude having CM on your phone means you already have clockwork installed. you just need the /system part of the leak and it's available here: http://forum.xda-developers.com/showthread.php?t=1074852
Really all he needs to do is run vision efs wipe. This been gone over a million times. CM + gps broke = needing efs wipe. No need to get into radios and all that just yet.
Sent from my HTC Vision using XDA Premium App
you can solve your gps issues by following two basics:
1. match libs in /system/libs with your radio version,
2. wipe two partitions like it is explained here: http://forum.xda-developers.com/showthread.php?t=1028405
You don't need the new rom, though - it still has the 2 muted seconds when receiving an incoming call - for me that is the no go.
sship said:
Thanks for the reply! I think you are underestimating how new I am to this, though. My question is really this: does it matter, when flashing the new gingerbread rom for g2 that just came out, that the rom is not just a rom, but also a radio and everything else? it is titled in the "PC10IMG" form, which seems to me, from reading other threads, to be a special thing.
[full title: PC10IMG_Vision_Gingerbread_S_TMOUS_2.13.531.8_Radio_12.52.60.25_26.08.04.30_M3_release_188635_signed]
also, would you recommend that i wipe stuff before flashing? when the person who flashed my phone with me last time did it, he wiped dalvik cache and two others (can't remember which, or where he found them in recovery), and user data as well. but if you go to do it within clockwork, it doesn't ask you to do that, does it? again, i'm sure there is a thread about this somewhere.
sorry sorry to be so new to this! and thanks a ton for the help.
Click to expand...
Click to collapse
I thought you were talking about the version of the leak that is mentioned in the last post (#10) and also mentioned above in post #4, which is pre-rooted. Thats the one you want. Flash from ROM Manager.
If you are talking about flashing this one:
http://forum.xda-developers.com/showthread.php?t=1074391
This is the official ROM, and as stated in the previous post, you will lose root. So you probably want to avoid this.
PC10IMG.ZIP files are flashable from Hboot (CWM not required). But since you have Clockwork, I believe you can flash any ROM or patch, as long as its a ZIP file. Its safer to flash from CWM anyway, so avoid Hboot for flashing ROMs.
Not positive, but I think you can keep your data since you are going between similar ROMs (Gingerbread, non-Sense). Wiping dalvik and cache are advisable. Not doing so when switching ROMs can lead to random bugs, and there is no real reason to not wipe them. You can wipe dalvik and cache in recovery. If you want to wipe data, you can also do that in recovery, under "advanced". But you will lose all your user data.
If you flash from ROM Manager, it will ask if you want to wipe. But I've never been clear on what all exactly is wiped (dalvik, cache, data). It might be all 3 of those.
Sorry, I've just stated a bunch of things I'm not completely sure about. So hopefully somebody else can confirm these.
The good news is, do a backup of your current ROM in ROM Manager before you flash anything, and if you screw up anything, you can just go into recovery and load your backup.
please help -- do not want to brick
petarpLab said:
well, it's a bit complicate.
supposedly the rom will return your phone to a totally stock state, which will give you the new radio etc, but you will not have root - this was already confirmed. One other forum member mentioned that he flashed the rom and did not loose S-OFF, which is a controversy...
Click to expand...
Click to collapse
I actually would prefer this to flashing a version of this rom that someone else has extracted/altered, however little. My fear is two things:
1 -- Will it brick my phone to flash a PCIMG file? (see here: http://forum.xda-developers.com/showthread.php?t=838484)
2 -- what do I have to do differently to flash a PCIMG file other than what I normally would do in clockwork to flash another rom (for example a CM rom)
THANKS!
xsteven77x said:
Really all he needs to do is run vision efs wipe. This been gone over a million times. CM + gps broke = needing efs wipe. No need to get into radios and all that just yet.
Click to expand...
Click to collapse
I have tried that, to no avail. I see others who have tried that and failed, and things seem to get tricky after that. I agree, I would rather avoid the nitty gritty stuff.
So I am devastated to see that there is no lock animation =(. That was something I was really looking forward to, despite the insignificance.
Sent from my T-Mobile G2 using XDA App
sship said:
I actually would prefer this to flashing a version of this rom that someone else has extracted/altered, however little. My fear is two things:
1 -- Will it brick my phone to flash a PCIMG file? (see here: http://forum.xda-developers.com/showthread.php?t=838484)
2 -- what do I have to do differently to flash a PCIMG file other than what I normally would do in clockwork to flash another rom (for example a CM rom)
THANKS!
Click to expand...
Click to collapse
My opinion, you're better off flashing the rooted ROM. If you flash the official PC10IMG.ZIP, you will lose root, and not be able to get it back without downgrading (negating the purpose of flashing the official ROM in the first place).
Are you worried about malicious, or accidentally harmful modifications to the ROM (in the rooted version of the leak)? I don't worry much about ROMs for reputable developers. But admittedly, I don't know anything about that user that posted the rooted version of the leak.
In response to your questions:
1) As the thread you posted indicates, its safer not to flash those files unless you know exactly what you are doing.
2) I think you can flash from Clockwork. But as I said, if you aren't sure what you are doing, its not a good idea. You will lose root, and I think some people have also gotten S-On by flashing the official ROMs also. I which case, you may be pretty screwed (as far as getting root), since you can't flash other ROMs with S-On.
Alright so I've reading through all sorts of different forums and feel lost and exactly what to do. I downloaded the official 2.3 update ROM for the G2 that Football had released off of a mirrored site from my phone's browser then renamed it PC10IMG and moved to the root of the SD card. I then did the whole volume down + power button to load the zip but for some reason it says:
VISION PVT SHIP S-ON
HBOOT-0.82.0000
MICROP-0425
RADIO-26.03.02.26_M
eMMC-boot
Sep 2 2010,17:59:38
SD checking...
Loading...[PC10DIAG.zip]
No image!
Loading...[PC10DIAG.nbh]
No image or wrong image!
Loading...[PC10IMG.zip]
No image!
Loading...[PC10IMG.nbh]
No image or wrong image!
I have no idea what to do or anything so help would be much appreciated. Now I would post this in that forum but because I just recently joined this site it will not allow me to do so. So, yea. Thanks.
Mr. Shaggy said:
Alright so I've reading through all sorts of different forums and feel lost and exactly what to do. I downloaded the official 2.3 update ROM for the G2 that Football had released off of a mirrored site from my phone's browser then renamed it PC10IMG and moved to the root of the SD card. I then did the whole volume down + power button to load the zip but for some reason it says:
VISION PVT SHIP S-ON
HBOOT-0.82.0000
MICROP-0425
RADIO-26.03.02.26_M
eMMC-boot
Sep 2 2010,17:59:38
SD checking...
Loading...[PC10DIAG.zip]
No image!
Loading...[PC10DIAG.nbh]
No image or wrong image!
Loading...[PC10IMG.zip]
No image!
Loading...[PC10IMG.nbh]
No image or wrong image!
I have no idea what to do or anything so help would be much appreciated. Now I would post this in that forum but because I just recently joined this site it will not allow me to do so. So, yea. Thanks.
Click to expand...
Click to collapse
Make sure it is named PC10IMG.zip and not PC10IMG.zip.zip
Sent from my LG-P990 using XDA Premium App
So I checked it out and it's named PC10IMG.zip so I don't know what could be wrong. I find it weird that I'm the only one having this problem.
Ok after reading that I can go back to default RUU. I used the panache RUU, then tried visionary, didn't work.
Then I tried gingerbreak and it gave me error telling me to manualy reboot to check if SU is there. I rebooted removing battery..... And vola... super user was installed.I got rooted. Just installed Rom manager to flash recovery and all is fine.
Sent from my HTC Panache using XDA App
Have you flashed any roms?
Sent from my HTC Glacier using XDA App
Don't want to use custom as I'm very happy with stock . But as clockwork is installed, it should be fine. Using adfree, market access. Both needed root.
Sent from my HTC Panache using XDA App
Did you do anything to get s off?
Sent from my HTC Glacier using XDA App
No it was already s-off
Sent from my HTC Panache using XDA App
Could you please point me to the HTC Panache RUU file... I've searched all over, but cant seem to find it... My girls MT4G was stock, and got the TMO Gingerbread OTA. It soft bricked her phone (I can go into bootloader, fastboot, & when i attempt to power on, I get as far as the MyTouch 4G splash screen). Since it didn't have a custom recovery & was S-On, I'm pretty much stuck. I figure if at least this flashes, root, or no root, the phone will be functional again.. Please help...
Big-O said:
Could you please point me to the HTC Panache RUU file... I've searched all over, but cant seem to find it... My girls MT4G was stock, and got the TMO Gingerbread OTA. It soft bricked her phone (I can go into bootloader, fastboot, & when i attempt to power on, I get as far as the MyTouch 4G splash screen). Since it didn't have a custom recovery & was S-On, I'm pretty much stuck. I figure if at least this flashes, root, or no root, the phone will be functional again.. Please help...
Click to expand...
Click to collapse
So you are saying she had a stock unrooted MT4G, and the OTA bricked her phone? Strange.
http://forum.xda-developers.com/showthread.php?p=16646127#post16646127
The RUU files for Mobilicity and Videotron are linked there. You might need a Gold Card to install, since the CID is different.
But overall, if the OTA bricked her S-ON device, I wonder if she just has the bad eMMC... and she was unlucky enough to discover that upon receiving an OTA.
The Dropbox link for Panache RUU doesn't work anymore. I've been looking for it but didn't find any.
How about the FileFactory link for the Mobilicity RUU?
http://www.filefactory.com/file/cb3...60.25_26.09.04.26_M_release_187963_signed.exe
Jack_R1 said:
The Dropbox link for Panache RUU doesn't work anymore. I've been looking for it but didn't find any.
Click to expand...
Click to collapse
link has been restored, please re archive it somewhere, as i dont have glacier anymore, thus i dont require any files for mytouch 4g.
here is a multiupload link incase i remove the file in future.....
Links in this post
Thanks atifsh. I did the same.
My Multiupload link for the Videotron RUU is:
http://www.multiupload.com/IO4BA5ZHW3
Atifsh's link for the same file is:
http://www.multiupload.com/EWYDRO1642
Atifsh's link for the Mobilicity RUU is:
http://www.multiupload.com/JTPVNNDRME
And it is still also available at FileFactory:
http://www.filefactory.com/file/cb3...60.25_26.09.04.26_M_release_187963_signed.exe
cmstlist said:
So you are saying she had a stock unrooted MT4G, and the OTA bricked her phone? Strange.
Click to expand...
Click to collapse
When I worked for Sprint's Tech Support department, most calls I got when the Gingerbread update rolled out to the HTC Evo 4G, were regarding this. It happens.
Couldn't start it from Rom Manager or hardware keys at start.
I have DZ HBoot which I think is the cause.
I went back to 3.0.2.0 which still works, can someone confirm this is because of the HBoot?
read the other threads or the CWM recovery thread in the dev section. Nearly everyones having some sort of problem with the 5.x.x.x version.
5.02.0 works on my dz. i havent done much lately as kernel.org is down so no cm flashing for me. but im sure id suffer the splash screen hang as previously encountered. 3.0.2.4 is the last stable recovery..
Sent from my HTC Vision using xda premium
ptesmoke said:
5.02.0 works on my dz. i havent done much lately as kernel.org is down so no cm flashing for me. but im sure id suffer the splash screen hang as previously encountered. 3.0.2.4 is the last stable recovery..
Click to expand...
Click to collapse
I'm also using 3.0.2.4 no problem.
Sora3087 said:
Couldn't start it from Rom Manager or hardware keys at start.
I have DZ HBoot which I think is the cause.
I went back to 3.0.2.0 which still works, can someone confirm this is because of the HBoot?
Click to expand...
Click to collapse
Latest recovery works great for me. Tmobile US G2 stock hboot.
Sent from my HTC Vision using XDA App
G1ForFun said:
Latest recovery works great for me. Tmobile US G2 stock hboot.
Sent from my HTC Vision using XDA App
Click to expand...
Click to collapse
Give it time,stick to the latest 3.0 bla bla version,try and reboot to recovery enough times and you will get stuck at the htc screen on version 5.0.2.0
Hboot should not be an issue
everytime it hangs in the htc white screen just take the battery out and boot into bootloader and from there access recovery
cwm 5 doesn't work for me as well.
rolled back to 3
using the DZ A7275
cmw 5.0.2.0 can work good
Okay so i might be dumb ( jk haha) but ive been searching everywhere and cant really find the right answer to my question i was hoping some one can explain it to me better than what ive been reading...
I have s=off and running MIUI rom but i need to convert back to my stock radio, rom, s=on and all the good stuff, due to a warrenty replacement on my phone.
I downloaded the PD15IMG.ZIP file and when to bootloader and it loaded fine and was working...until... it did like a mini restart and loaded the zip again and at the end it said UPDATE FAILED...press power to restart. but i noticed my s=on after that mini restart.
My question is how do i fix the update failed issue. why is it failing?
It depends on what method of rooting you used. Did you use ./gfree? There is a post somewhere on XDA on regaining S-ON and stock Froyo (or Gingerbread?): http://forum.xda-developers.com/showthread.php?t=858996 go to "Procedure to revert"
im pretty sure if i remember correctly i used visionary+.
from what ive read. can i just flash the 2.2.1 radio and then flash the pd15img file?
Not sure on that one. Try googling, or wait for a real answer. Sorry I couldn't help as much =\
No problem thanks for trying
drpepper4lf said:
Okay so i might be dumb ( jk haha) but ive been searching everywhere and cant really find the right answer to my question i was hoping some one can explain it to me better than what ive been reading...
I have s=off and running MIUI rom but i need to convert back to my stock radio, rom, s=on and all the good stuff, due to a warrenty replacement on my phone.
I downloaded the PD15IMG.ZIP file and when to bootloader and it loaded fine and was working...until... it did like a mini restart and loaded the zip again and at the end it said UPDATE FAILED...press power to restart. but i noticed my s=on after that mini restart.
My question is how do i fix the update failed issue. why is it failing?
Click to expand...
Click to collapse
I assume the PD15IMG you were trying to flash was the stock 2.2.1. Which radio were you using when you tried to flash?
Sent from my HTC Glacier using XDA App
It shouldn't matter which way he rooted it if he's just flashing the RUU unless he's on the OTA gingerbread which he isn't...
Try checking the md5 again for your pd15img.zip see if it matches.. if anything download it again... sounds like you have a bad download that doesn't complete all the updates. It restarts on the initial update because it updates your bootloader.
I finally got it to work. I just had a updated radio and I couldn't install the oringinal pd15 IMG file. I found a updated pd IMG file on xda and it worked like a charm!
Sent from my HTC Sensation XE with Beats Audio using XDA Premium App
drpepper4lf said:
I finally got it to work. I just had a updated radio and I couldn't install the oringinal pd15 IMG file. I found a updated pd IMG file on xda and it worked like a charm!
Sent from my HTC Sensation XE with Beats Audio using XDA Premium App
Click to expand...
Click to collapse
Glad you got it fixed. Here's a thread I made a couple weeks ago that explains how to fix it in case anyone else has the problem.
http://forum.xda-developers.com/showthread.php?t=1356607
Sent from my HTC Glacier using XDA App
Hello all , well I had it working great, used the HTC unlock procedure, because i`m at 1.50 HBOOT S-ON "Unlocked" ... installed the manual recovery, then flashed it with FRESH 4.1 for shift, it seemed fine, then I got into installing apps and it glitched on me and went into this reboot cycle....
Guess I did`nt wipe it right or something, because all it will do is turn on and say "FRESH" then reboot and does the same.....
I downloaded the stock RUU and it fails says" error recovery failed" I have tried everything and spent hours on this 1....
Is there anyone out there with a Nandroid Backup file ?
is that what I need ? i`m screwed here....
you guidance would be greatly appreciated
thanks in advance Bill
What is this FRESH you talking about? I haven't seen a rom with that name over here, are you sure this rom was made for the Evo Shift 4G? I know theres a HTC Shift which is diferent than our phone.
Sent from my PG06100 using xda premium
Desik53 said:
What is this FRESH you talking about? I haven't seen a rom with that name over here, are you sure this rom was made for the Evo Shift 4G? I know theres a HTC Shift which is diferent than our phone.
Sent from my PG06100 using xda premium
Click to expand...
Click to collapse
I believe he is referencing this ROM: http://forum.xda-developers.com/showthread.php?t=1347928
[ROM] 11/23/11 | Fresh Evo Shift 4.1.1
It's available in development thread and it is for the EVO Shift 4G.
Sent from my PG06100 using xda premium
Yes thats the 1
Its called Fresh 4.1
I used Fresh for the past 16 months on my EVO4G and figured it was a safe bet on the shift.........
Any ideas on what i can do ???????
Im not sure but if you unlocked with the htc tool, you have to delete the boot.img from the rom .zip, and than fastboot flash the kernel...
Sent from my PG06100 using Tapatalk
Yes it is unlocked with the HTC tool, and at 1.5.0 Hboot S-on........ but like I said I was able to load the fresh rom on it...
How can I do what you say as I now have a paperweight
Thanks again
You might want to go thru the root process if its still s-on, the ruu your using might be rooted version, try downloading the ruu from HTC sight or try factory reset from bootloader.
Sent from my Inspire 4G using XDA App
s-on will always show on 1.5 Hboot units after running HTC unlock tool... It does say "unlocked" now, I have done another phone like this and it worked fine....this one just glitched on me.
I tried the stock RUU from HTC and it fails,and have tried factory reset.... to no avail .....Help !!!!
suffolk said:
s-on will always show on 1.5 Hboot units after running HTC unlock tool... It does say "unlocked" now, I have done another phone like this and it worked fine....this one just glitched on me.
I tried the stock RUU from HTC and it fails,and have tried factory reset.... to no avail .....Help !!!!
Click to expand...
Click to collapse
You keep saying hboot 1.5, AFAIK the Shift doesn't have a bootloader with that version number. I know the EVO 3D was locked down with the 1.5 bootloader, is that what you are referring to?
If you are using a Shift and have used the unlock tool, you should look at this thread http://forum.xda-developers.com/showthread.php?t=1490747. If you could flash the misc.img, then maybe you could get the ruu to work.
Sent from my PG06100 using Tapatalk
ITS A 3D i`m talking about
You keep saying hboot 1.5, AFAIK the Shift doesn't have a bootloader with that version number. I know the EVO 3D was locked down with the 1.5 bootloader, is that what you are referring to?
God i feel foolish, YES ITS A 3D i`m talking about ,i`m sorry
So the 3D with fresh 4.1 is in a boot loop if you wanna call it that .......
So your evo 3d is in a boot loop because you flashed a evo shift rom onto it?
Sent from my PG06100 using Tapatalk
No when it boots it says FRESH EVO3D
No when it boots it says FRESH EVO3D.........
Problem is it just keeps rebooting and so on...
I have tried everything
So why does this thread exsist again?
:facepalm:
Do not flash Shift roms on your 3vo kid. You're in the wrong forum.
edit: It sounds like you flashed a 3vo rom on your shift?
Please clarify.
No it's a evo 3D he's on. He has a thread over there also.