Related
(additional CHOWN notes added below. If you are getting "chown: unknown user/group system:system" read them!
Ok, we do have a WHOLE other thread that was made a sticky already, but you need to read the WHOLE thing to get all the properly interesting parts. I'll make sure I keep this OP up to date.
The following methods enable side loading and installing of apps onto the captivate, without the need of a program on a computer attached via the SDK. There are multiple methods, and for the most part, these methods that have worked flawlessly for many users here on this forum. We're just collecting them all in one post for speed and clarity.
Methods that assist in loading applications, without modification to the settings (a.k.a still need a computer attached) can be found at the collective wiki, http://samsungcaptivate.wikia.com/wiki/How_to_Sideload
ALL METHODS REQUIRE ROOT & BUSYBOX:
Root your phone, see http://forum.xda-developers.com/showthread.php?t=725555
Busybox : http://www.appbrain.com/app/stericson.busybox
Please, save a clean, un-altered backup copy of this file. To be safe. Rarely does corruption occur, but if it does, it won't be good.
Method 1: From Win7x64, Samsung Drivers, Android SDK installed.
This method uses the tools you already have at hand, as part of the SDK. All instances in code blocks are run inside of the command prompt. You will need to know where you installed your SDK, and the tools directory therein.
Once rooted, go install BusyBox installer from the App Market/AppBrain etc and run it. It will download and install the latest version for you.
From my Win7x64, with USB Debugging ON. Ensure that you phone is UNLOCKED as it the SU app will ask for permission for 'UNKOWN' in the following command.
Connect to PC, and Eject/Safely Remove the SD card, and "Turn off USB Storage" on the phone.
open command prompt, follow along:
Code:
> c:
> cd \android\tools
> adb shell
$ su
# cp /dbdata/databases/com.android.providers.settings/settings.db /sdcard/settings.db
# exit
$ exit
mount the SD cards to the pc,
"USB Connected select to... ", Mount
mine mounted as H:
Code:
> copy H:\settings.db settings.db
> sqlite3 settings.db
~> update secure set value="1" where name="install_non_market_apps";
1 row updated
~> .quit
> copy settings.db H:\settings.db
Eject the drive, safely remove, etc.
"Turn off USB storage" etc, to mount it back to the phone
Code:
> adb shell
$ su
# cp /sdcard/settings.db /dbdata/databases/com.android.providers.settings/settings.db
# chmod 660 /dbdata/databases/com.android.providers.settings/settings.db
# chown system.system /dbdata/databases/com.android.providers.settings/settings.db
# exit
$ exit
> adb reboot
Bam. Done.
Method 2: with Root Explorer
(courtesy of kirbo20)
This is a pretty easy process. I went in to Root Explorer - dbdata - databases - com.android.providers.settings, copied settings.db to my sd card, edited it on my pc with a db editor changed 0 to a 1 next to non market apps. Copied it back to the original directory, rebooted and installed a non market app.
(added by gotfolk)
again using FF plug in..
Click Secure on the left pane
click on install_non_market_apps
click edit
number 3 states value click there and type in 1. hit ok
(/gotfolk)
Please use caution. If you want to make sure the db save properly open it on your sd card before you copy and replace the original. It should open up as a readable table. If it opens up in a txt editor its corrupt. This permanently enables non market apps. You can not toggle it on and off.
( This is a sqlite3 database file, you can find many GUI editors that will be able to handle the editing, including a FF plugin. Search "SQLite" )
Method 3: with Root Explorer & Sqlite Editor & Terminal Emulator
(courtesy of ice3186)
- Open Root Explorer
- Browse to /dbdata/databases/com.android.providers.settings/
- copy settings.db to the root of your sd card ( /sdcard/ )
- Click on the newly copied settings.db in /sdcard/, with SQLite Editor installed, you can open and edit it here.
- Select the "secure" table, and update the value of 'install_nonmarket_apps' from 0 to 1, and save.
- close out of SQLite editor
- copy the modified file ( /sdcard/settings.db ), and browse back to /dbdata/databases/com.android.providers.settings/ and paste
- confirm the overwrite if asked and then open again to confirm it's been changed.
- open Terminal Emulator
Code:
$ su
# chmod 660 /dbdata/databases/com.android.providers.settings/settings.db
# chown system.system /dbdata/databases/com.android.providers.settings/settings.db
# reboot
- reboot phone.
No PC, no Mac, no drivers, no SDK. Viola.
Method 4: Mac & Android SDK
You will see "[sdcard]" through this method...I don't own a Mac so I'm guessing a bit.
This method uses the tools you already have at hand, as part of the SDK. All instances in code blocks are run inside of the Terminal. You will need to know where you installed your SDK, and the tools directory therein.
Once rooted, go install BusyBox installer from the App Market/AppDroid etc and run it. It will download and install the latest version for you.
From a Max OS X, with USB Debugging ON. Ensure that you phone is UNLOCKED as it the SU app will ask for permission for 'UNKOWN' in the following command.
Connect to Mac, and Eject/Safely Remove the SD card, and "Turn off USB Storage" on the phone.
open Terminal, follow along:
Code:
> cd /android/tools
> ./adb shell
$ su
# cp /dbdata/databases/com.android.providers.settings/settings.db /sdcard/settings.db
# exit
$ exit
mount the SD cards to the Mac,
"USB Connected select to... ", Mount
mine mounted as [sdcard]
Code:
> cp [sdcard]/settings.db settings.db
> ./sqlite3 settings.db
~> update secure set value="1" where name="install_non_market_apps";
1 row updated
~> .quit
> cp settings.db [sdcard]/settings.db
Eject the drive, safely remove, etc.
"Turn off USB storage" etc, to mount it back to the phone
Code:
> ./adb shell
$ su
# cp /sdcard/settings.db /dbdata/databases/com.android.providers.settings/settings.db
# chmod 660 /dbdata/databases/com.android.providers.settings/settings.db
# chown system.system /dbdata/databases/com.android.providers.settings/settings.db
# exit
$ exit
> ./adb reboot
Method 5: Android SDK only
Of course, this also requires root and BusyBox.
From the android sdk tools folder in a command prompt:
note: all linux/mac should use './adb' in place of just 'adb', and place quotes on the echo statement between echo and |
Code:
adb shell
su
chmod 666 /dbdata/databases/com.android.providers.settings/settings.db
exit
exit
adb pull /dbdata/databases/com.android.providers.settings/settings.db settings.db
echo update secure set value = 1 where name = 'install_non_market_apps';|sqlite3 settings.db
adb push settings.db /dbdata/databases/com.android.providers.settings/settings.db
adb shell
su
chmod 660 /dbdata/databases/com.android.providers.settings/settings.db
chown system.system /dbdata/databases/com.android.providers.settings/settings.db
reboot
NOTICE
You must chown the settings.db file and reboot once it is back in its original location. If you do not, you will not be able to alter settings such as WiFi,GPS, default Ringtones, etc. It's also highly likely that you may wish to chmod to 660 (-rw-rw---), so I've tacked that in here and above.
Code:
> adb shell
$ su
# chmod 660 /dbdata/databases/com.android.providers.settings/settings.db
# chown system.system /dbdata/databases/com.android.providers.settings/settings.db
# exit
$ exit
> adb reboot
Chown Note
In the event that you are getting "chown: unknown user/group system:system" please try 1000.1000 as this has been reported to work on several of the samfirmware-released roms that fail with this message.
Absolutely do not use someone else's settings.db unless you specifially make it a point replace android_id with your android_id!
Special Note
Any of these adb comments can be run from Terminal Emulator (Android Terminal Emulator, free) from the su command. I use the ADB here as it is a lot easier to type into. Terminal Emulator will provide you with a shell that is an exact match of the 'adb shell' command, as they both simply provide the shell to you.
Result:
After completing this process you will be able to load non-market apps directly from the APK files, SDK tools, tools such as DroidExplorer and apps such as APKtor.
You will be able to download the APKs directly, and then install from your favorite file browser (e.g. MyFiles(s), Astro(f), RootExplorer($)...)
Tools
SQLite Administrator (Win, GUI, no FF required) http://sqliteadmin.orbmu2k.de/
SQLite Manager (FF addon, search for it)
Application links
Root Explorer http://www.appbrain.com/app/com.speedsoftware.rootexplorer
SQLite Editor http://www.appbrain.com/app/com.speedsoftware.sqleditor
Terminal Emulator http://www.appbrain.com/app/jackpal.androidterm
BusyBox http://www.appbrain.com/app/stericson.busybox
bump.. settings.db people.. please read the threads!!
good stuff!!!
Ok. I can find settings.db with root explorer. i can copy it and i put it in my sdcard folder but nothing is there when i try to find it on my computer. Im trying to use SQlite editor on firefox. Im also on a powermac g4 if that makes a difference. I did download sqlite editor on my phone and I can find where to change the values for installing non market apps but when I change from a zero to a one it denies me. Please help
Ok, so let me make sure I have your process:
- Rooted
- Installed busybox ?
- Installed Root Explorer
- copied settings.db to /sdcard
-- cant see the file when mounted to Mac, thus can't edit with FF plugin
-- SQLite editor for android wont allow access..
(is this the SQLite Editor you used? http://www.appbrain.com/app/com.speedsoftware.sqleditor)
Try installing "Android Terminal Emulator" from the market (http://www.appbrain.com/app/jackpal.androidterm)
- open Terminal Emulator
$ su
# cd /sdcard
# chmod 777 settings.db
# exit
- Open the sqlite editor, and make the change
- back to Terminal Emulator
$ su
# chmod 660 settings.db
- proceed with rest of instructions.
how many more threads do we need on the same thing? We already have ALL of this info posted, several times.
designgears said:
how many more threads do we need on the same thing? We already have ALL of this info posted, several times.
Click to expand...
Click to collapse
Please read my initial post, first few lines. I explained why, specifically: Consolidation.
Thanks I will give it a try later today.
Sent from my SAMSUNG-SGH-I897 using XDA App
- OP updated to reflect stock ownership settings for 'chown'
Also, which sqlite app are you using? I'll put that up as method 3 if it works out nicely for you.
fixed a typo in the chown command.. bad copy paste.. bad.. doh.
added method 3 courtest of ice3186
added links to Root Explorer ($), SQLite Editor ($) and Android Terminal Emulator (free) and added the chmod/chown commands to method 3, as they were skipped by accident.
bump** for newcomers, sry.
thanks max for adding the third method. this was by far much easier than the first two methods. I have a hard time getting my mac to talk to my phone sometimes and it was good to not have to plug the lil guy in at all. Worked like a charm
myself and ice3186 are glad we could be of help
If I had accidentally deleted the settings.db how should I go about recovering my phone? Now I have the issue that my phone won't boot past the boot animation and I'm notbsure what to do
mkslt4 said:
If I had accidentally deleted the settings.db how should I go about recovering my phone? Now I have the issue that my phone won't boot past the boot animation and I'm notbsure what to do
Click to expand...
Click to collapse
Did you make any kind of backup before hand?
You may have to use someone else's settings.db and then do a factory reset.
Depending on how much you've done with the phone I'd suggest deciding on doing a the reboot process for rooting, but choosing to clear data. This may rebuild it, I am not sure.
my dbdata directory is empty.. My phone is less then 2 hours old and i have some market apps installed..
xetrev said:
my dbdata directory is empty.. My phone is less then 2 hours old and i have some market apps installed..
Click to expand...
Click to collapse
Oh, if it's running, then this folder isn't actually empty.
What are you using to browse this folder?
i followed this guide to a T yesterday when i did this. I used option 1, ADB commands on terminal since i'm a mac and it was super easy, did it in about 5 minutes.
this is just my opinion but i think everyone should try playing with the ADB commands, they're actually really useful and educational to know. and if you should brick your phone, just use clockwork recovery to restore it.
that being said, maybe you should add a disclaimer that when done on a mac, the adb commands require a "./" in front (so adb reboot becomes ./adb reboot). cp, chown, and chmod commands don't need it though (or at least i didn't).
It's not pretty, but I managed to get the exploit used by Archangel to work on the 2.3.20 firmware. Hopefully someone can think of something to automate this process, or knows of a better way to do this.
I believe what Archos is doing is simply restricting your ability to execute the Archangel application in the required directories, with the addition of the psneuter exploit, you can get around this.
This exploit requires that you have ADB setup, the Archangel APK, and the psneuter exploit.
Create a folder on your computer titled archosroot (or anything you would like)
Download Archangel from http://forum.xda-developers.com/showthread.php?t=928767 rename the apk to zip and extract the files.
From the extracted files navigate to "res" then to "raw"
In this folder copy "ls" and "su" to your "archosroot" folder
Download psneuter from http://www.thinkthinkdo.com/trac/project1/attachment/wiki/psneuter/psneuter.zip and extract the files.
Copy the extracted psneuter to your "archosroot" folder.
Enable USB Debugging on your Archos, and connect it to your computer with USB.
From a command prompt, navigate to the directory ADB is installed in.
Verify that the device is connected by running
adb devices
Your archos should be listed, if not please refer to the forum on how to setup ADB for the archos
Once your archos is detected run the following commands.
adb push pathto\archosroot\psneuter /data/local/tmp
(replace pathto with the location your archosroot folder is in, for example c:\archosroot\psneuter)
adb shell chmod 777 /data/local/tmp/psneuter
adb shell /data/local/tmp/psneuter
This may take a few moments
Copy ls and su to your sdcard
adb push pathto\archosroot\ls /sdcard
adb push pathto\archosroot\su /sdcard
Connect to the shell
adb shell
move ls and su to /tmp
mv /sdcard/ls /tmp/
mv /sdcard/su /tmp/
Execute the ls exploit
/tmp/ls 0x62c7a315 0x260de680
Install the superuser application from the market (if you don't already have it)
You should now be able to run su to get root access from a terminal.
Note 1: I was previously rooted with archangel so I already had these files, I have not tried without the files being installed at all, however since this is only a temp root, the process should be the same.
Note 2: I was not able to get Titanium Backup to work, it could be the psneuter exploit prevents the application from properly requesting the right permissions.
This is good, but you should post this in the developer sup-forum
its too hard to do this for beginners
Thanks! It's very simple instruction, will try it today. As easy as install Urukdroid.
I postponed to upgrage to 2.3.20 just due to lack of root method without SDK.
I need the root just for copy some scripts to \system\bin
this has already been done in the following thread with perm root.
http://forum.xda-developers.com/showthread.php?t=897877
Firmwares have already been made that include overclock as well, the first post reveals all.
cool.
the_Danzilla , the way you pointed to requires SDE installation. I don't want to use SDE.
Inciner8Fire said:
Download psneuter from http://www.thinkthinkdo.com/trac/project1/attachment/wiki/psneuter/psneuter.zip and extract the files.
Copy the extracted psneuter to your "archosroot" folder.
Enable USB Debugging on your Archos, and connect it to your computer with USB.
From a command prompt, navigate to the directory ADB is installed in.
Verify that the device is connected by running
adb devices
Your archos should be listed, if not please refer to the forum on how to setup ADB for the archos
Once your archos is detected run the following commands.
adb push pathto\archosroot\psneuter /data/local/tmp
(replace pathto with the location your archosroot folder is in, for example c:\archosroot\psneuter)
adb shell chmod 777 /data/local/tmp/psneuter
adb shell /data/local/tmp/psneuter
Click to expand...
Click to collapse
From what I can read psneuter is a root exploit for the adbd service. So you don't need archangel to complete the root.
Can you verify what user adbd is running after you execute psneuter.
adb shell whoami
The other thing that is mentioned in the first lines of the source code of psneuter is that it effectively disables reading the settings this will probably affect a lot of programs and probably is the reason Titanium backup is not working. So this method is effectively useless to have a working root.
wdl1908 said:
From what I can read psneuter is a root exploit for the adbd service. So you don't need archangel to complete the root.
Can you verify what user adbd is running after you execute psneuter.
adb shell whoami
The other thing that is mentioned in the first lines of the source code of psneuter is that it effectively disables reading the settings this will probably affect a lot of programs and probably is the reason Titanium backup is not working. So this method is effectively useless to have a working root.
Click to expand...
Click to collapse
I was doing some more looking and you are right that because of breaking the settings this is not a good long term root.
However I would not call it useless, since you should be able to manually back up an application.
Perhaps the property file that this setting is in can be modified with this, so that it can be rooted using a more standard method.
Not sure what I did, but I was able to get root with the properties intact.
My archos had froze today and I was forced to power it off so I know the properties were no longer be neutered. I was looking at some of the properties files and for the heck of it I tried running su from a terminal, and it worked.
I opened Titanium backup and it prompted for root permissions.
Perhaps something about the forced power cycle?
I found out that when I connect to a wireless network (as required by archangel) if the disable network shares option is chosen it's not possible to root.
However it would appear that if you connect and don't select this option Archangel will still work.
I suppose there could be something else I did without realizing it, but this has worked after rebooting 5 times so far.
Well this was a bit of a mess!
Firstly updating:
http://forum.xda-developers.com/showthread.php?t=1043349
http://phonedock.net/huawei-ideos-s7-froyo-2-2-2-update.html I followed this nice writeup. Be sure to delete the log file in dload for the second round of the upgrade as your device might, like mine, just blink on and off for a while trying to flash what it thinks it finds is already flashed but what just gives an error!
http://www.androidtablets.net/forum...uawei-ideos-s7-official-firmware-2-2-2-a.html Links to 2.2.2 Brazil which is the best for the 101 apparently, some tests done in that post on which rom work best for which model.
Now,
REMOVE YOUR SDCARD IF ANY! AND REBOOT THE DEVICE ! THIS HACK RELIES HEAVILY ON HIGH STRANGENESS AND SPOOKY ACTION AT A DISTANCE!
Originally i though modifying an ol doroot.sh script to using the psneuter exploit from SuperOneClick i would manage to root the device. Not without some fuzz, no. Firstly i discovered "cp" and many basic fileutils im used to in the world of *nix was missing from the 2.2.2 image kindly provided by Huawei ( The Norwegian Telenor image i might add that the camera on a model 101 will not work with!) so i found an easier way! push push push!
Here's what i did, for convenience ill try making it a script, but be prepared to copy these commands manually instead! For windows simply remove the ./ and add .exe .
Now, to make this work, simply get SuperOneClick from http://shortfuse.org/?page_id=2 and unzip, i used the adb from the google android sdk, but i guess the adb binary that comes with SOC is a simpler route if your just in for a quick root fix. Simply rename the appropriate adb for your system and use this method.
The simplest thing to do i guess is to copy Exploits/psneuter or gingerbreak to the ADB folder (in SuperOneClick's folder) and go on from there, also copy su-v3 (rename it to su) and Superuser.apk from "Root/" to the folder (ADB), or if you choose to, rewrite this "script" with the appropriate paths. Im unsure if the following script will work in every case, so you might want to do it manually, but most should get the drift, if you are not comfortable with this procedure you probably have no business or reason rooting the device in the first place. Disclaimer; if this bricks your device don't blame me, this is a fact of "it worked for me", your results may differ.
Be sure to set your USB mode to "Developer" mode
AND BE ROOT ON YOUR MACHINE!
Code:
#/bin/bash
echo "The BackAsswardsRootScript!\n\n"
echo "Lets start the adb server.\n\n"
./adb kill-server
./adb start-server
echo "Pushing the exploit psneuter onto the device.\n\n"
./adb push psneuter /data/local/tmp/psneuter
./adb shell "chmod 0755 /data/local/tmp/psneuter"
./adb push busybox /data/local/tmp/busybox
./adb shell "chmod 4755 /data/local/tmp/busybox"
echo "Now we run the root exploit.\n\n"
./adb shell "./data/local/tmp/psneuter"
echo "We should be root now, making sure.\n\n"
./adb root
echo "Remointing the FS as RW!\n\n"
./adb shell " /data/local/tmp/busybox mount -o rw,remount /system"
echo "Pushing the system files in place\n"
./adb shell "/data/local/tmp/busybox cp /data/local/tmp/busybox /system/bin/busybox"
./adb push su /system/bin/su
./adb push Superuser.apk /system/app/Superuser.apk
echo "Correct permissions might be nice.\n"
./adb shell "chmod 4755 /system/bin/busybox"
./adb shell "chmod 4755 /system/bin/su"
./adb shell "chmod 755 /system/app/Superuser.apk"
# Lets go back to read only, just for kicks!
echo "Remounting the filesystem as Read-Only\n\n"
./adb shell "busybox mount -o ro,remount -t /system"
echo "You should now be rooted my friend.\n Enjoy!\n"
Please help feed my Linux addiction! Go to http://threader.zapto.org and click Donate!
Rooting S7 using Gingerbreak
Just too inform you. I've just succesfully rooted the Indonesian 2.2.2 running on a
S7-105 using Chainfire's Gingerbreak v1.2.
Cool, theres a gingerbreak exploit in the superoneclick package also, i tried that after i though psneuter didnt work, just a matter of replacing psneuter with gingerbreak. Did you use this method though or did you find some other way?
I didn't change or replace anything. My terminal skills are not on a level to have the guts anyway.
I simply updated from S7V100R001C43B010 to S7v100R001C98B021.
Then ran the Gingerbreak 1.2 exploit.
Interesting, yeah the gingerbreak exploit will work, when i wrote the fist post i used the gingerbreak exploit instead of the psneuter one thinking psneuter didnt work, turns out it did though and i went back to that one as its designed for 2.2.2, didnt know of this wrapper though, thanks!
Just granted su superuser permissions on the Australian s7
Great work. Just noticed a missing final quotation mark:
threader said:
./adb shell "chmod 0755 /data/local/tmp/psneuter
Click to expand...
Click to collapse
Probably works because of the end of line but should be:
./adb shell "chmod 0755 /data/local/tmp/psneuter"
threader said:
Well this was a bit of a mess!
Firstly updating:
http://forum.xda-developers.com/showthread.php?t=1043349
http://phonedock.net/huawei-ideos-s7-froyo-2-2-2-update.html I followed this nice writeup. Be sure to delete the log file in dload for the second round of the upgrade as your device might like mine just blink on and off for a while trying to flash what it finds is already flashed but what just gives an error. !
http://www.androidtablets.net/forum...uawei-ideos-s7-official-firmware-2-2-2-a.html Links to 2.2.2 Brazil which is the best for the 101 apparently, some tests there on which roms work best for which models also.
Now,
REMOVE YOUR SDCARD IF ANY! AND REBOOT THE DEVICE ! THIS HACK RELIES HEAVILY ON HIGH STRANGENESS AND SPOOKY ACTION AT A DISTANCE!
Originally i though modifying an ol doroot.sh script to using the psneuter exploit from SuperOneClick i would manage to root the device. Not without some fuzz, no. Firstly i discovered "cp" and many basic fileutils was missing from the 2.2.2 image kindly provided by Huawei (Norwegian Telenor image, that i might add, the camera on a model 101 will not work with!) soo i found an easier way! push push push!
Heres what i did, for convenience ill try making it a script, but im making it as i type this post so this is untested as a script(!) Be prepared to copy these commands instead!
Now, to make this work, simply get SuperOneClick from http://shortfuse.org/?page_id=2 and unzip, i used the adb from the google android sdk, but i guess the adblinux binary that comes with SOC will work just as well, simply rename it to adb and use this method. The simplest thing to do i guess is copy Exploits/psneuter to the ADB folder (in SuperOneClick's folder) and go from there, also copy su-v3 (and rename it to su) and Superuser.apk from Root to the folder (ADB), or rewrite this "script"/collection of commands i used" with the appropriate paths. Im unsure if the following script will work as is as i said, so you might want to do it manually, but most should get the drift, if not you probably have no business or reason rooting the device in the first place. Disclaimer; if this bricks your device don't blame me, this is a fact of "it worked for me", your results may differ.
Be sure to set your usb mode to Developer mode
BE ROOT!
#/bin/bash
echo "The backasswardsrootscript!\n\n"
echo "Lets start the adb\n\n"
./adb kill-server
./adb start-server
./adb push psneuter /data/local/tmp/psneuter
./adb shell "chmod 0755 /data/local/tmp/psneuter
echo "Now we run the root exploit.\n\n"
./adb shell "./data/local/tmp/psneuter"
echo "Should say we are already root now.\n\n"
./adb root
echo "Remointing the FS as RW!\n\n"
# This really should be /dev/block/mmcblk0p1, i have no idea why this works.
./adb shell "mount -o rw,remount -t ext3 /dev/block/mmcblk1p1 /system"
# Now instead of copying using cp or moving with mv, considering "cp" was missing
# and mv just didnt work for some reason...! I found just pushing the files straight to the
# system after remounting worked just fine
echo "Pushing the system files in place\n"
./adb push su /system/bin/su
./adb push Superuser.apk /system/app/Superuser.apk
./adb push busybox /system/bin/busybox
echo "Correct permissions might be nice.\n"
./adb shell "chmod 4755 /system/bin/busybox
./adb shell "chmod 4755 /system/bin/su"
./adb shell "chmod 755 /system/app/Superuser.apk"
# Lets go back to read only just for kicks!
echo "Remounting the filesystem as Read-Only\n"
./adb shell "mount -o ro,remount -t ext3 /dev/block/mmcblk1p1 /system"
echo "You should be rooted my friend\n Enjoy!\n BE SURE TO DONATE TO SUPERONECLICK!!!"
# One of the main strangenesses i found was the block device was logically enough placed on
# partioton 1, of block1 which really should have been block 0 part 1, but that doesnt work.
# So it boils down to that this shouldnt work but does for no apparent reason(!).
# even /etc/mtab says that mmcblk0p1 is mounted to a non existent /mnt/dcard
# as an EXT4 partition which isnt supposed to be supported until 2.3.x
Click to expand...
Click to collapse
Dear S7 users,I am using the ideos s7 by Teltra supllier and i did unlock sim by norwegian rom.I read a lot of document but i didnt find out an easy way to run clockwork that i can run cook rom,can u help me how to run it in easy way.Thanks and appreciate that.
http://www.androidtablets.net/forum...wegian-2-2-2-s7v100r001c57b111.html#post82863
PuZZleDucK said:
Just granted su superuser permissions on the Australian s7
Great work. Just noticed a missing final quotation mark:
Probably works because of the end of line but should be:
./adb shell "chmod 0755 /data/local/tmp/psneuter"
Click to expand...
Click to collapse
Great! Thanks! Ops, yeah missed that, fixed now, thank you for pointing that out. I haven't spent much more time on this. the pad has pretty much been untouched since i moved house. I would like to make this easier for less technical inclined here but its just a matter of replacing ./adb with adb.exe if your on windows. Besides, i don't want to be at fault for bricking someone. And maybe i could write some simple application for installing Gnu/Linux as well, ( http://forum.xda-developers.com/showthread.php?t=1109730 ) but that will have to wait until someone bribes me or hits me over the head i guess.
tell me how you did it. i have a s7 - 105 too. please tell me the full tutorial, beginning to the end. cause i'm new to this android stuff. please..
---------- Post added at 08:53 PM ---------- Previous post was at 08:51 PM ----------
Maniacnl said:
Just too inform you. I've just succesfully rooted the Indonesian 2.2.2 running on a
S7-105 using Chainfire's Gingerbreak v1.2.
Click to expand...
Click to collapse
tell me how you did it. i have a s7 - 105 too. please tell me the full tutorial, beginning to the end. cause i'm new to this android stuff. please..
I'm running a script to modify settings.db (found in the application forum) so that I can wirelessly tether and use the GPS on my phone while running Google Maps on the KF.
The script starts like this:
adb shell rm /data/local/tmp/*
adb push zergRush /data/local/tmp
adb shell chmod 755 /data/local/tmp/zergRush
adb shell ./data/local/tmp/zergRush
Click to expand...
Click to collapse
and works fine.
But I'm having problems running the script that others are having no problem with at this point in the script.
adb pull /data/data/com.android.providers.settings/databases/settings.db
copy settings.db settings.bak
sqlite3 settings.db "update secure set value=1 where name='mock_location';"
adb push settings.db /data/data/com.android.providers.settings/databases/settings.db
adb reboot
Click to expand...
Click to collapse
The script runs into permission errors. I have all the files in the same directory as adb in the platform-tools folder. adb is communicating with the device with the adb devices command. I run the .bat file from the folder while in a DOS command shell. And I get this error
C:\Program Files (x86)\Android\android-sdk\platform-tools>adb pull /data/data/com.android.providers.settings/databases/settings.db
failed to copy '/data/data/com.android.providers.settings/databases/settings.db' to './settings.db': Permission denied
C:\Program Files (x86)\Android\android-sdk\platform-tools>copy settings.db settings.bak
The system cannot find the file specified.
C:\Program Files (x86)\Android\android-sdk\platform-tools>sqlite3 settings.db "update secure set value=1 where name='mock_location';"
Error: no such table: secure
C:\Program Files (x86)\Android\android-sdk\platform-tools>adb push settings.db /data/data/com.android.providers.settings/databases/settings.db
failed to copy 'settings.db' to '/data/data/com.android.providers.settings/databases/settings.db': Permission denied
Click to expand...
Click to collapse
Any idea what's going on?
i assume you'r at the $ prompt - if you type in su the prompt should change to #
perhaps a hint in the right direction ...
zergrush does'nt work anymore since 6.2.1 and burritoroot
I am not at any command prompt when running the script. I'm at the Windows prompt, and I just execute the script name?
Confused.
when you type adb or adb shell your mostly at the $ prompt
when you type su the promt usually changes to # - thats root access
i think you have to integrate that in your script ...
I added
adb shell su
to the start of my script, but then it just hangs at the root prompt.
if you have rooted with burritoroot try "adb root"
It says:
adbd cannot run as root in production builds
ok then i think you will have to try it with the su method - maybe "adb su" could work - it's just a try
otherwise i think you will have to write a second unix stile script (ending .sh) to do the stuff and call it from your dos script or run it in the adn shell - but i'm not the unix expert - sorry
i'm running out of time now - wish you much luck with your script !!!
Anyone else please?
Resolved.….
Resolved how? Very curious
Please, how did you solved the problem ???
thanks
would be interested too !
Here's how.
I was so frustrated, didn't seem to be able to achieve root status and use ADB. So, I bought root explorer, went to directory where settings.db file was, and copied it to sdcard folder on the KF. Then brought it over to my PC just over the USB connection (KF was a Windows drive).
In Windows, ran the part of the script that replaces the "0" with a "1". Then copied it back to the sdcard folder on the device, and used root explorer to move it back to its proper directory.
Only one caution. Make sure that you don't change the permissions or ownerships of the file, that they are the same as when you first grabbed it.
It took some doing, but after following the instructions in this link:
http://forum.xda-developers.com/showthread.php?t=2559915
I was finally able to root my Nook Glowlight. The instructions are kind of sprawled out and extremely unclear so I will sum up.
As always, you will need the ADB. In order to install the ADB, you need the Java Development Kit and the Android Studio (formerly known as the Android SDK)
http://www.oracle.com/technetwork/java/javase/downloads/index.html
http://developer.android.com/sdk/installing/studio.html
How to obtain root via ADB: The ONLY way you can root is using Windows. I was successful on Windows 7 32 bit, but it may be possible on other versions.
step 1) install bootloader driver.
You need to grab the drivers from here (bnusbdrivers.zip):
http://forum.xda-developers.com/showpost.php?p=49665945&postcount=279&nocache=1&z=184593200683593
then, open the Device Manager (on Windows). Be ready to right click on the new device 'omap3660' that shows.
With the nook turned completely off, plug in a USB cable. you will have less than 3 seconds to right click the new omap3660 device that shows up in the system profiler.
If you were successful and you right clicked on it in time, manually install the Barnes & Noble USB driver (there are entries added to the generic Google drivers for both the TI Omap 3660 bootloader and the ADB device after you modify the uRamdisk later on)
***NOTE***
If you WEREN'T successful on your first try (took me THREE times to get to it in time), you aren't going to get another chance to install the drivers. At least not easily anyway, because after Windows tries to automatically install the drivers for the bootloader and fails, it will disregard the device any time it shows up after that. So, you are going to need to delete the registry entries that it created, which in my experience was easier said than done. Even admin access was not sufficient to make the necessary changes to the registry.
You will need to launch regedit.exe using another tool called psexec which is available here:
http://technet.microsoft.com/en-us/sysinternals/bb897553.aspx
after you download the pstools package, copy those .exe files to C:\Windows\System32\ (in order to add them to $PATH in cmd.exe)
Then, once you've installed the pstools commands to C:\Windows\System32\, run cmd.exe as admin (right click it and select 'run as administrator') and then open regedit.exe with the following command
Code:
psexec -s -i -d regedit.exe
Then, once regedit is open you need to find the keys created by the Nook bootloader and delete them. The Nook bootloader's device ID is 0451:d00e
You are going to be looking in HKEY_LOCAL_MACHINE\Current Control Set\enum\usb\ for the keys with the bootloader's device IDs. There may also be keys generated in control set 001 and 002 as well. Delete all of those keys and then reboot your computer. Then with the nook power off completely, repeat the process from the first step. eventually you will be successful installing the bootloader driver.
Step 2) temporarily boot with uRamdisk-noogie
you need to download omaplink.exe from here:
http://www.temblast.com/android.htm
and you also need to download the four files which allow you to temporarily mount the boot partition; omap3_aboot.bin, u-boot-ng2-exp-v03.bin, uImage-ng2-130-stk and uRamdisk-noogie.
They are available here:
http://forum.xda-developers.com/showpost.php?p=49779966&postcount=285
download usbboot-ng2-images-noogie-v1.zip
The next part is easy.
Extract the .zip file and then fire up cmd.exe. cd into the directory of the newly extracted .zip
in the new working directory, enter the command
Code:
omaplink omap3_aboot.bin u-boot-ng2-exp-v03.bin uImage-ng2-130-stk uRamdisk-noogie
Then, with the Nook powered all the way off and omaplink running, plug it in and a few seconds later, after the device boots up all the way, you will be looking at the contents of the boot partition instead of the internal storage like normal.
Step 3) Edit uRamdisk
you will need to download bootutil.exe from here
http://www.temblast.com/android.htm
copy bootutil.exe to C:\Windows\System32
with the boot partition mounted, copy uRamdisk to your computer and extract the files init.rc and default.prop, eg;
Code:
bootutil /x /v uRamdisk init.rc default.prop
then using notepad++ (available here: http://notepad-plus-plus.org/) edit the files as follows
default.prop
ro.secure=0
ro.allow.mock.location=1
ro.debuggable=1
persist.service.adb.enable=1
and
init.rc
comment out lines 375 and 392-399
(do this by adding a # to the beginning of the line)
uncomment line 215
(do this by deleting the # at the beginning of the line)
save both files and then repack them into uRamdisk
Code:
bootutil /r /v uRamdisk init.rc default.prop
copy uRamdisk back onto the Nook, eject the disk and power off the device. Reboot and you should be able to connect to ADB via WiFi
eg;
Code:
adb connect 192.168.0.10
replacing '10' with whatever IP your Nook is grabbing from your router.
Step 4) Full Root
at this point, you have root access via ADB only. You will not have root access in any apps like Root Explorer, Terminal, TiBackup, etc.
In order to finish PROPERLY rooting your Nook, you need to install 'su' to /system/bin/ and install the superuser.apk
Code:
adb connect 192.168.0.10
adb shell mount -o remount, rw /system
adb push su /system/bin/
adb shell chmod 6755 /system/bin/su
adb install superuser.apk
reboot your device one more time and then you will be fully rooted.
*** Note ***
this devices firmware seems to be a strange hybrid between donut and eclair, although it purports itself to be Android 2.1. The Superuser.apk and su binary came from an old Cyanogenmod 4.6 build in case anyone was wondering (Android Donut). The ones from Cyanogenmod 5 (Android Eclair) do not work. you will get the 'install failed older sdk' error.
installing busybox
I tired installing busybox by using the stericson busybox pro.apk. It would always freeze at 6.47%.
I figured out that if I grabbed an older version of the busybox binary and pushed it to /system/xbin manually and then chmodded it to the proper permissions, auto updates and proper symlinking work using the busybox app
Code:
adb shell mount -o remount, rw /system
adb shell mkdir -p /system/xbin
adb push busybox /system/xbin
adb shell chmod 6755 /system/xbin/busybox
adb install busybox.apk
Then reboot, and run the busybox app to update and create symlinks.
enjoy!
installing nano and bash
Code:
adb connect 192.168.0.10
adb shell
mount -o remount, rw /system
adb push nano /system/xbin/
chmod 6755 /system/xbin/nano
adb push bash /system/xbin/
chmod 6755 /system/xbin/bash
bash
mv /system/bin/sh /system/bin/sh.bak
ln -s /system/xbin/bash /system/bin/sh
chmod 6755 /system/bin/sh
adb push profile /system/etc/
adb push terminfo /system/etc/
and then in terminal emulator under 'Preferences' change the initial command to
Code:
export TERMINFO=/system/etc/terminfo;export TERM=linux;export HOME=/sdcard;
and finally
Code:
adb push bashrc /sdcard
adb shell
mv /sdcard/bashrc /sdcard/.bashrc
exit
nano works just fine via ADB, but because of lack of 'ctrl' key (and physical buttons to assign it to) you won't be able to write files (ctrl+o) using the terminal on your nook. But between having full proper root access, busybox, a proper bash terminal emulator and nano for editing config files, this should REALLY extend the usefulness of your Nook Glowlight. It should work just fine on other versions of Nook too.
Hi N00b-un-2,
Many thanks for your summary!
There is one important edit that I think you missed,
in init.rc you also need to:
Line #375, comment out "disabled" with a # at the start of the line.
(see http://forum.xda-developers.com/showthread.php?p=49070213#post49070213)
without this I couldn't get adb to connect.
And since you already made it very noob friendly, might I suggested you clarify:
Line #215 remove # to enable adb over wifi
(rather than search for 5555)
Also, I'm not expert, but I believe the commands to get superuser on the device are (at least it worked for me):
adb connect 192.168.x.x
adb shell mount -o remount, rw /system
adb push su /system/bin/
adb shell chmod 6755 /system/bin/su
adb install superuser.apk
Finally, I'm not sure if this is important, but maybe remount system as read only again:
adb shell mount -o remount, ro /system
Thanks again, nice work!
---------- Post added at 01:48 PM ---------- Previous post was at 01:10 PM ----------
Hi again,
had similar issues with installing busybox, here's what worked for me (note needed to run su to create dir):
adb shell mount -o remount, rw /system
adb shell /system/bin/su
adb shell mkdir -p /system/xbin
adb push busybox /system/xbin
adb shell chmod 6755 /system/xbin/busybox
adb install busybox.apk
cheers.
As far as remounting /system as ro, I would HIGHLY recommend just rebooting at this point, otherwise your nook might be stuck in a weird pseudo-rooted state. Probably won't cause any problems, but why risk it?
Thanks for clarifying the line number. I will make the appropriate edits to my instructions. I was working off the top of my head and couldn't remember what exact line the ADB over TCP config was, as I just used ctrl+w '5555' to find it myself.
There are several pre-edited uRamdisk images floating around the forum with various features enabled which would be easier for noobs than extracting the config files and manually editing and then repacking them. In the future I'll probably throw those on here as well.
darz said:
Hi N00b-un-2,
Many thanks for your summary!
There is one important edit that I think you missed,
in init.rc you also need to:
Line #375, comment out "disabled" with a # at the start of the line.
(see http://forum.xda-developers.com/showthread.php?p=49070213#post49070213)
without this I couldn't get adb to connect.
And since you already made it very noob friendly, might I suggested you clarify:
Line #215 remove # to enable adb over wifi
(rather than search for 5555)
Also, I'm not expert, but I believe the commands to get superuser on the device are (at least it worked for me):
adb connect 192.168.x.x
adb shell mount -o remount, rw /system
adb push su /system/bin/
adb shell chmod 6755 /system/bin/su
adb install superuser.apk
Finally, I'm not sure if this is important, but maybe remount system as read only again:
adb shell mount -o remount, ro /system
Thanks again, nice work!
---------- Post added at 01:48 PM ---------- Previous post was at 01:10 PM ----------
Hi again,
had similar issues with installing busybox, here's what worked for me (note needed to run su to create dir):
adb shell mount -o remount, rw /system
adb shell /system/bin/su
adb shell mkdir -p /system/xbin
adb push busybox /system/xbin
adb shell chmod 6755 /system/xbin/busybox
adb install busybox.apk
cheers.
Click to expand...
Click to collapse
N00b-un-2 said:
There are several pre-edited uRamdisk images floating around the forum with various features enabled which would be easier for noobs than extracting the config files and manually editing and then repacking them. In the future I'll probably throw those on here as well.
Click to expand...
Click to collapse
Would have been good if I could have easily found a pre-edited image, but your instructions were a great alternative, thanks again
darz said:
Would have been good if I could have easily found a pre-edited image, but your instructions were a great alternative, thanks again
Click to expand...
Click to collapse
Sorry for the really noob question, I have rooted, wifi adb running and installed apps as per your instructions, but I can't seem to access any of it on the nook. How can I get access to the launcher I installed?
You mentioned pre-edited images, do any of those come with the apps I need to get access to a custom launcher?
Cheers,
Dariusz
==============
Updated: All sorted
==============
For some reason had some issues with ADW launcher, Launcher pro worked fine.
ps I think I made a mistake with the su step I suggested, if you run a one line shell command I don't think it keeps su privileges, so I believe you need to run commands within the shell as per below:
adb shell
mount -o remount, rw /system
/system/bin/su
mkdir -p /system/xbin
exit
adb push busybox /system/xbin
adb shell chmod 6755 /system/xbin/busybox
adb install busybox.apk
Noob
Hey guys any instructions noob friendly or a video in youtube,i stick up at dab connect 192.168.0.10.I dos't have a Windows PC and using Mac whit Parallels Desktop.Is it possible instructions for Mac?
The above instructions from N00b-un-2 should work fine running a vm with parallels on your Mac.
OB
Sent from my SPH-D710VMUB using Tapatalk 2
valentin1985 said:
Hey guys any instructions noob friendly or a video in youtube,i stick up at dab connect 192.168.0.10.I dos't have a Windows PC and using Mac whit Parallels Desktop.Is it possible instructions for Mac?
Click to expand...
Click to collapse
Before you perform the adb connect step you need to find out what your IP address is:
On your nook, click on the settings icon in the top right corner and then select "Change"
Under Wireless Networks, select the wifi name that you are already connected to (where it says "Connected to the internet")
This will display your connection details, remember that IP address
Now go back to your pc and type:
adb connect [IP address]
darz said:
Before you perform the adb connect step you need to find out what your IP address is:
On your nook, click on the settings icon in the top right corner and then select "Change"
Under Wireless Networks, select the wifi name that you are already connected to (where it says "Connected to the internet")
This will display your connection details, remember that IP address
Now go back to your pc and type:
adb connect [IP address]
Click to expand...
Click to collapse
BIG HINT! If you're using Powershell ISE, you have to type .\adb.exe connect [IP address] or else it won't recognize "adb" as an executable!
Don't ask why, because I don't know. :?
thenookieforlife3 said:
BIG HINT! If you're using Powershell ISE, you have to type .\adb.exe connect [IP address] or else it won't recognize "adb" as an executable!
Don't ask why, because I don't know. :?
Click to expand...
Click to collapse
So far so good,but now what?
valentin1985 said:
So far so good,but now what?
Click to expand...
Click to collapse
I just gave a little tip on Powershell ISE. I do not know much about the Nook GlowLight rooting process, as I have a NSTG, not a NG. Ask someone else.
thenookieforlife3 said:
I just gave a little tip on Powershell ISE. I do not know much about the Nook GlowLight rooting process, as I have a NSTG, not a NG. Ask someone else.
Click to expand...
Click to collapse
Yes,i try whit dis command .\adb.exe connect 192.168.0.9 but result is the same.
valentin1985 said:
Yes,i try whit dis command .\adb.exe connect 192.168.0.9 but result is the same.
Click to expand...
Click to collapse
But that's okay! What I said was, if you are using the command program Powershell ISE, do it that way instead. But you are just using cmd.exe, not Powershell ISE!
In cmd.exe, which is what you are using, it is not neccessary to type .\adb.exe. Just type adb.
From there, ask someone else in this thread.
thenookieforlife3 said:
But that's okay! What I said was, if you are using the command program Powershell ISE, do it that way instead. But you are just using cmd.exe, not Powershell ISE!
In cmd.exe, which is what you are using, it is not neccessary to type .\adb.exe. Just type adb.
From there, ask someone else in this thread.
Click to expand...
Click to collapse
I prefer to use ConEmu or Console2 when I am forced to use Windows. Not a big fan of CMD.EXE or Powershell/PowershellISE. there are plenty of other CLI alternatives out there
N00b-un-2 said:
I prefer to use ConEmu or Console2 when I am forced to use Windows. Not a big fan of CMD.EXE or Powershell/PowershellISE. there are plenty of other CLI alternatives out there
Click to expand...
Click to collapse
Well, as I ONLY use Windows and Powershell ISE has a nice-enough layout for my purposes, I use it. That's why I gave a tip on it.
Actually on a lot of installs just typing adb in the command console won't work either unless it's got the path variable set up correctly, I find it easiest to just right click and choose run as administrator, no need for the path to be setup.
OB
Sent from my SPH-D710VMUB using Tapatalk 2
FW 1.2.1
Hi guys,
thanks for creating this thread. I was wondering if this rooting procedure was tested with the firmware 1.2.1 ?
real-6 said:
Hi guys,
thanks for creating this thread. I was wondering if this rooting procedure was tested with the firmware 1.2.1 ?
Click to expand...
Click to collapse
This rooting procedure is for the new Nook GlowLight with firmware 1.3.1. Your device is a Nook Simple Touch with GlowLight, which can be rooted very easily using the rooting package here.