Well this was a bit of a mess!
Firstly updating:
http://forum.xda-developers.com/showthread.php?t=1043349
http://phonedock.net/huawei-ideos-s7-froyo-2-2-2-update.html I followed this nice writeup. Be sure to delete the log file in dload for the second round of the upgrade as your device might, like mine, just blink on and off for a while trying to flash what it thinks it finds is already flashed but what just gives an error!
http://www.androidtablets.net/forum...uawei-ideos-s7-official-firmware-2-2-2-a.html Links to 2.2.2 Brazil which is the best for the 101 apparently, some tests done in that post on which rom work best for which model.
Now,
REMOVE YOUR SDCARD IF ANY! AND REBOOT THE DEVICE ! THIS HACK RELIES HEAVILY ON HIGH STRANGENESS AND SPOOKY ACTION AT A DISTANCE!
Originally i though modifying an ol doroot.sh script to using the psneuter exploit from SuperOneClick i would manage to root the device. Not without some fuzz, no. Firstly i discovered "cp" and many basic fileutils im used to in the world of *nix was missing from the 2.2.2 image kindly provided by Huawei ( The Norwegian Telenor image i might add that the camera on a model 101 will not work with!) so i found an easier way! push push push!
Here's what i did, for convenience ill try making it a script, but be prepared to copy these commands manually instead! For windows simply remove the ./ and add .exe .
Now, to make this work, simply get SuperOneClick from http://shortfuse.org/?page_id=2 and unzip, i used the adb from the google android sdk, but i guess the adb binary that comes with SOC is a simpler route if your just in for a quick root fix. Simply rename the appropriate adb for your system and use this method.
The simplest thing to do i guess is to copy Exploits/psneuter or gingerbreak to the ADB folder (in SuperOneClick's folder) and go on from there, also copy su-v3 (rename it to su) and Superuser.apk from "Root/" to the folder (ADB), or if you choose to, rewrite this "script" with the appropriate paths. Im unsure if the following script will work in every case, so you might want to do it manually, but most should get the drift, if you are not comfortable with this procedure you probably have no business or reason rooting the device in the first place. Disclaimer; if this bricks your device don't blame me, this is a fact of "it worked for me", your results may differ.
Be sure to set your USB mode to "Developer" mode
AND BE ROOT ON YOUR MACHINE!
Code:
#/bin/bash
echo "The BackAsswardsRootScript!\n\n"
echo "Lets start the adb server.\n\n"
./adb kill-server
./adb start-server
echo "Pushing the exploit psneuter onto the device.\n\n"
./adb push psneuter /data/local/tmp/psneuter
./adb shell "chmod 0755 /data/local/tmp/psneuter"
./adb push busybox /data/local/tmp/busybox
./adb shell "chmod 4755 /data/local/tmp/busybox"
echo "Now we run the root exploit.\n\n"
./adb shell "./data/local/tmp/psneuter"
echo "We should be root now, making sure.\n\n"
./adb root
echo "Remointing the FS as RW!\n\n"
./adb shell " /data/local/tmp/busybox mount -o rw,remount /system"
echo "Pushing the system files in place\n"
./adb shell "/data/local/tmp/busybox cp /data/local/tmp/busybox /system/bin/busybox"
./adb push su /system/bin/su
./adb push Superuser.apk /system/app/Superuser.apk
echo "Correct permissions might be nice.\n"
./adb shell "chmod 4755 /system/bin/busybox"
./adb shell "chmod 4755 /system/bin/su"
./adb shell "chmod 755 /system/app/Superuser.apk"
# Lets go back to read only, just for kicks!
echo "Remounting the filesystem as Read-Only\n\n"
./adb shell "busybox mount -o ro,remount -t /system"
echo "You should now be rooted my friend.\n Enjoy!\n"
Please help feed my Linux addiction! Go to http://threader.zapto.org and click Donate!
Rooting S7 using Gingerbreak
Just too inform you. I've just succesfully rooted the Indonesian 2.2.2 running on a
S7-105 using Chainfire's Gingerbreak v1.2.
Cool, theres a gingerbreak exploit in the superoneclick package also, i tried that after i though psneuter didnt work, just a matter of replacing psneuter with gingerbreak. Did you use this method though or did you find some other way?
I didn't change or replace anything. My terminal skills are not on a level to have the guts anyway.
I simply updated from S7V100R001C43B010 to S7v100R001C98B021.
Then ran the Gingerbreak 1.2 exploit.
Interesting, yeah the gingerbreak exploit will work, when i wrote the fist post i used the gingerbreak exploit instead of the psneuter one thinking psneuter didnt work, turns out it did though and i went back to that one as its designed for 2.2.2, didnt know of this wrapper though, thanks!
Just granted su superuser permissions on the Australian s7
Great work. Just noticed a missing final quotation mark:
threader said:
./adb shell "chmod 0755 /data/local/tmp/psneuter
Click to expand...
Click to collapse
Probably works because of the end of line but should be:
./adb shell "chmod 0755 /data/local/tmp/psneuter"
threader said:
Well this was a bit of a mess!
Firstly updating:
http://forum.xda-developers.com/showthread.php?t=1043349
http://phonedock.net/huawei-ideos-s7-froyo-2-2-2-update.html I followed this nice writeup. Be sure to delete the log file in dload for the second round of the upgrade as your device might like mine just blink on and off for a while trying to flash what it finds is already flashed but what just gives an error. !
http://www.androidtablets.net/forum...uawei-ideos-s7-official-firmware-2-2-2-a.html Links to 2.2.2 Brazil which is the best for the 101 apparently, some tests there on which roms work best for which models also.
Now,
REMOVE YOUR SDCARD IF ANY! AND REBOOT THE DEVICE ! THIS HACK RELIES HEAVILY ON HIGH STRANGENESS AND SPOOKY ACTION AT A DISTANCE!
Originally i though modifying an ol doroot.sh script to using the psneuter exploit from SuperOneClick i would manage to root the device. Not without some fuzz, no. Firstly i discovered "cp" and many basic fileutils was missing from the 2.2.2 image kindly provided by Huawei (Norwegian Telenor image, that i might add, the camera on a model 101 will not work with!) soo i found an easier way! push push push!
Heres what i did, for convenience ill try making it a script, but im making it as i type this post so this is untested as a script(!) Be prepared to copy these commands instead!
Now, to make this work, simply get SuperOneClick from http://shortfuse.org/?page_id=2 and unzip, i used the adb from the google android sdk, but i guess the adblinux binary that comes with SOC will work just as well, simply rename it to adb and use this method. The simplest thing to do i guess is copy Exploits/psneuter to the ADB folder (in SuperOneClick's folder) and go from there, also copy su-v3 (and rename it to su) and Superuser.apk from Root to the folder (ADB), or rewrite this "script"/collection of commands i used" with the appropriate paths. Im unsure if the following script will work as is as i said, so you might want to do it manually, but most should get the drift, if not you probably have no business or reason rooting the device in the first place. Disclaimer; if this bricks your device don't blame me, this is a fact of "it worked for me", your results may differ.
Be sure to set your usb mode to Developer mode
BE ROOT!
#/bin/bash
echo "The backasswardsrootscript!\n\n"
echo "Lets start the adb\n\n"
./adb kill-server
./adb start-server
./adb push psneuter /data/local/tmp/psneuter
./adb shell "chmod 0755 /data/local/tmp/psneuter
echo "Now we run the root exploit.\n\n"
./adb shell "./data/local/tmp/psneuter"
echo "Should say we are already root now.\n\n"
./adb root
echo "Remointing the FS as RW!\n\n"
# This really should be /dev/block/mmcblk0p1, i have no idea why this works.
./adb shell "mount -o rw,remount -t ext3 /dev/block/mmcblk1p1 /system"
# Now instead of copying using cp or moving with mv, considering "cp" was missing
# and mv just didnt work for some reason...! I found just pushing the files straight to the
# system after remounting worked just fine
echo "Pushing the system files in place\n"
./adb push su /system/bin/su
./adb push Superuser.apk /system/app/Superuser.apk
./adb push busybox /system/bin/busybox
echo "Correct permissions might be nice.\n"
./adb shell "chmod 4755 /system/bin/busybox
./adb shell "chmod 4755 /system/bin/su"
./adb shell "chmod 755 /system/app/Superuser.apk"
# Lets go back to read only just for kicks!
echo "Remounting the filesystem as Read-Only\n"
./adb shell "mount -o ro,remount -t ext3 /dev/block/mmcblk1p1 /system"
echo "You should be rooted my friend\n Enjoy!\n BE SURE TO DONATE TO SUPERONECLICK!!!"
# One of the main strangenesses i found was the block device was logically enough placed on
# partioton 1, of block1 which really should have been block 0 part 1, but that doesnt work.
# So it boils down to that this shouldnt work but does for no apparent reason(!).
# even /etc/mtab says that mmcblk0p1 is mounted to a non existent /mnt/dcard
# as an EXT4 partition which isnt supposed to be supported until 2.3.x
Click to expand...
Click to collapse
Dear S7 users,I am using the ideos s7 by Teltra supllier and i did unlock sim by norwegian rom.I read a lot of document but i didnt find out an easy way to run clockwork that i can run cook rom,can u help me how to run it in easy way.Thanks and appreciate that.
http://www.androidtablets.net/forum...wegian-2-2-2-s7v100r001c57b111.html#post82863
PuZZleDucK said:
Just granted su superuser permissions on the Australian s7
Great work. Just noticed a missing final quotation mark:
Probably works because of the end of line but should be:
./adb shell "chmod 0755 /data/local/tmp/psneuter"
Click to expand...
Click to collapse
Great! Thanks! Ops, yeah missed that, fixed now, thank you for pointing that out. I haven't spent much more time on this. the pad has pretty much been untouched since i moved house. I would like to make this easier for less technical inclined here but its just a matter of replacing ./adb with adb.exe if your on windows. Besides, i don't want to be at fault for bricking someone. And maybe i could write some simple application for installing Gnu/Linux as well, ( http://forum.xda-developers.com/showthread.php?t=1109730 ) but that will have to wait until someone bribes me or hits me over the head i guess.
tell me how you did it. i have a s7 - 105 too. please tell me the full tutorial, beginning to the end. cause i'm new to this android stuff. please..
---------- Post added at 08:53 PM ---------- Previous post was at 08:51 PM ----------
Maniacnl said:
Just too inform you. I've just succesfully rooted the Indonesian 2.2.2 running on a
S7-105 using Chainfire's Gingerbreak v1.2.
Click to expand...
Click to collapse
tell me how you did it. i have a s7 - 105 too. please tell me the full tutorial, beginning to the end. cause i'm new to this android stuff. please..
Related
If anyone can post a link to a detailed Ubuntu guide for newbies to root the Hero and remove stock apps, I would appreciate it. The guide posted doesn't go into too much detail in Ubuntu since the OP said that he could not get it to work in Ubuntu. Thanks.
killabee44 said:
If anyone can post a link to a detailed Ubuntu guide for newbies to root the Hero and remove stock apps, I would appreciate it. The guide posted doesn't go into too much detail in Ubuntu since the OP said that he could not get it to work in Ubuntu. Thanks.
Click to expand...
Click to collapse
Wouldnt the Mac version work since they are both *nix?
I was able to root my Sprint HTC hero just fine running Jaunty. I followed the instructions in the guide you mentioned, for Ubuntu. One thing I noticed is before adb recognized my phone, I had to start "HTC Sync" from the phone's notifications. Just ignore the error about it not finding HTC Sync on your PC. Obviously it never will since HTC Sync is a Windows app
Here's the step by step that worked for me: http://romeosidvicious.com/2009/11/09/rooting-the-htc-hero-with-ubuntu-karmic/
I typed it so I could find it easily if necessary and figured why not share it....
romeosidvicious,
Thanks for all your hard work. I and others really appreciate it.
Stevious said:
I was able to root my Sprint HTC hero just fine running Jaunty. I followed the instructions in the guide you mentioned, for Ubuntu. One thing I noticed is before adb recognized my phone, I had to start "HTC Sync" from the phone's notifications. Just ignore the error about it not finding HTC Sync on your PC. Obviously it never will since HTC Sync is a Windows app
Click to expand...
Click to collapse
Yep, that is something I had to do in windows XP as well. It will help many others as well. Thanks.
Stevious said:
I was able to root my Sprint HTC hero just fine running Jaunty. I followed the instructions in the guide you mentioned, for Ubuntu. One thing I noticed is before adb recognized my phone, I had to start "HTC Sync" from the phone's notifications. Just ignore the error about it not finding HTC Sync on your PC. Obviously it never will since HTC Sync is a Windows app
Click to expand...
Click to collapse
Great, now my Ubuntu Jaunty machine won't detect the phone. I did the above but it still won't work. Im gonna reboot and retry...
Edit:
Nope, no love for my Ubuntu. It's not seeing the Hero. I will have to research this one.. If anyone has suggestions, please chime in.
Ok, found a solution:
http://forum.xda-developers.com/showthread.php?t=537508
----------------------------------------------------------------
Here is the part that solved it for me:
Setting up UDEV to recognize HTC Device -
1. Type the following into a terminal (Applications > Accessories > Terminal):
Code:
gksudo gedit /etc/udev/rules.d/51-android.rules
2. Now add the following line to the blank file:
Code:
SUBSYSTEM=="usb", SYSFS{idVendor}=="0bb4", MODE="0666"
3. Click save and close.
4. To restart udev, open up a terminal and enter:
Code:
sudo /etc/init.d/udev restart
---------------------------------------------------------------------
Thanks to Wddglr for all the useful info. It looks like I will be using other things he posted about. Hopefully that info will help someone else.
Just curious, which version of Ubuntu are you running? I didn't have to make any UDEV changes in Jaunty.
romeosidvicious said:
Here's the step by step that worked for me: http://romeosidvicious.com/2009/11/09/rooting-the-htc-hero-with-ubuntu-karmic/
I typed it so I could find it easily if necessary and figured why not share it....
Click to expand...
Click to collapse
I want to follow through with this...
I was following this
http://www.youtube.com/watch?v=ArMO5IHS2eI
until the step came to plug it in and then he suggested typing "adb devices" which told me this.
"~/android-sdk-linux/tools$ adb devices
bash: adb: command not found"
So I came here and I want to follow the links tutorial.. two questions
Is it safe to proceed even though i've been told adb: Command not found
will i be able to proceed although ive been told this command is not found?
Onompoly2 said:
"~/android-sdk-linux/tools$ adb devices
bash: adb: command not found"
So I came here and I want to follow the links tutorial.. two questions
Is it safe to proceed even though i've been told adb: Command not found
will i be able to proceed although ive been told this command is not found?
Click to expand...
Click to collapse
Try:
sudo ./adb devices
From the same directory. Or, you can specify the full path:
sudo ~/android-sdk-linux/tools/adb devices
To answer your other questions, it won't work if it says the command is not found.
Okay
It worked but I must have turned into an idiot when i decided my operating system was good enough.
This isn't working, and I am not even upgraded to the operating system the tutorial is written for...
194 updates due... running 8.04 with a bunch of double half installed broken applications.. maybe I should reformat.
I'll let you guys know how things go which ever way it goes.
back again. fresh 9.10 install fully updated.
Following this
http://romeosidvicious.com/2009/11/09/rooting-the-htc-hero-with-ubuntu-karmic/
I get this far
[email protected]:~# sudo su
[email protected]:~# cd ~/android-sdk-linux/tools
[email protected]:~/android-sdk-linux/tools#
[email protected]:~/android-sdk-linux/tools#
[email protected]:~/android-sdk-linux/tools# ./adb push ../asroot2 /data/local/
711 KB/s (74512 bytes in 0.102s)
[email protected]:~/android-sdk-linux/tools# ./adb shell chmod 0755 /data/local/asroot2
[email protected]:~/android-sdk-linux/tools# /data/local/asroot2 /system/bin/sh
bash: /data/local/asroot2: No such file or directory
[email protected]:~/android-sdk-linux/tools# ./adb shell /data/local/asroot2 /system/bin/sh
[+] Using newer pipe_inode_info layout
Opening: /proc/559/fd/3
SUCCESS: Enjoy the shell.
# mount -o remount,rw -t yaffs2 /dev/block/mtdblock3 /system
cd /system/bin
cat sh > su
chmod 4755 su
reboot
Click to expand...
Click to collapse
It seems as though after it says "SUCCESS" that my terminal just stops responding to code...
Tried reading the link to where he made the tutorial from, but its a mixture of ubuntu and windows with 30 pages of posts.
Any thoughts/help?
Thanks
[Continuing]
So just pretending that everything is going as planned I reboot the phone and it actually turns my computer off as well..
So I continue with the steps.
[email protected]:~# cd ~/android-sdk-linux/tools
[email protected]:~/android-sdk-linux/tools# ./adb push ../recovery-RA-heroc-v1.2.3.img /sdcard/
* daemon not running. starting it now *
* daemon started successfully *
1199 KB/s (3352576 bytes in 2.730s)
[email protected]:~/android-sdk-linux/tools# ./adb shell
$ su
su: permission denied
Click to expand...
Click to collapse
But Get permission denied.
I'm going to go ahead and start over but skip the first line that i input that said SUCCESS and stopped the terminal.
(really don't know what i'm doing but I think I need to get these two lines in
cat sh > su
chmod 4755 su)
EDIT: on second thought perhaps this has something to do with me being logged in as root on my computer from the get go, i'll try that.
A dummy and his cell phone perhaps soon part.
# mount -o remount,rw -t yaffs2 /dev/block/mtdblock3 /system
cd /system/bin
cat sh > su
chmod 4755 su
reboot
Click to expand...
Click to collapse
It looks like you copy/pasted this whole section as a block. I think you need to execute the commands one at a time, and wait for a new "#" prompt between each one. The reason the terminal stops responding is that as one long string, it's not a meaningful command.
buck2202 said:
It looks like you copy/pasted this whole section as a block. I think you need to execute the commands one at a time, and wait for a new "#" prompt between each one. The reason the terminal stops responding is that as one long string, it's not a meaningful command.
Click to expand...
Click to collapse
I didn't, although i did try that as well
after I would do the mount commands i would no longer get a $ or a # sign, it was just a bunch of nothingness...
I ended up booting up my girlfriends vista and then spent quite a while figuring out how to get the driver for adb, I had to follow two different windows guides for rooting for some reason as well... so if that says anything.. just imagine how long it took me to realize how to get the driver hahah
buck2202 said:
It looks like you copy/pasted this whole section as a block. I think you need to execute the commands one at a time, and wait for a new "#" prompt between each one. The reason the terminal stops responding is that as one long string, it's not a meaningful command.
Click to expand...
Click to collapse
no, I'm having the same problem. After the "mount" command it gives me nothing.
Edit: doing this in karmic
Odd. I've had no problems following the generic procedure from theunlockr on ubuntu. My only suggestion would be to turn
Code:
./adb shell /data/local/asroot2 /system/bin/sh
into
Code:
./adb shell
/data/local/asroot2 /system/bin/sh
I'm not sure why it should make a difference, but on my computer "./adb shell <command>" exits the shell when it finishes. From what you've pasted, it doesn't look like that's happening to you, but that's my only guess right now.
If you run "./adb devices" do you see your serial number?
And out of curiosity, why are you running as root on your computer? (sudo su) Have you tried just starting the adb server as root, and running the rest of the commands normally? Does this work?
Code:
./adb kill-server
sudo ./adb start-server
./adb devices
Hi, I'm pretty geeky for a non IT person, but I have had a Blackberry up until now, so I am totally new to this Android set up. I have the Epic on Sprint; am frustrated with battery life, and would like to try and root the phone for 2.2 froyo. however most of the tutorials blow through the lingo (adb, huh?) in a way that is not explanatory for people who are new to this. Is their either a visual step-by-step guide for people or a more basic explanation of what is what and what to do somewhere? And, so far all I've seen is for Windows people. I have a Mac running snow leopard?
Help!
tromano said:
Hi, I'm pretty geeky for a non IT person, but I have had a Blackberry up until now, so I am totally new to this Android set up. I have the Epic on Sprint; am frustrated with battery life, and would like to try and root the phone for 2.2 froyo. however most of the tutorials blow through the lingo (adb, huh?) in a way that is not explanatory for people who are new to this. Is their either a visual step-by-step guide for people or a more basic explanation of what is what and what to do somewhere? And, so far all I've seen is for Windows people. I have a Mac running snow leopard?
Help!
Click to expand...
Click to collapse
I'm thinking of writing a script for Mac users, i don't have an epic but my xo-worker does and i rooted his today on my Mac, not as simple as the one click root but is doable.
that would be awesome; i guess the main things are 1. if you root it, can you upgrade to 2.2? 2. if you root it and upgrade, can you undo everything to factory?
Id be interested in this also
Sent from my SPH-D700 using Tapatalk
tromano said:
that would be awesome; i guess the main things are 1. if you root it, can you upgrade to 2.2? 2. if you root it and upgrade, can you undo everything to factory?
Click to expand...
Click to collapse
1. Rooting doesn't instantly make you 2.2 Upgradeable. 2.2 Froyo comes in different flavors for different manufactures. They lock the phone down with their systems so they phone cannot be unlocked, etc. Right now we are a bit far behind in getting 2.2 on the Epic. I think Sprint might even get it faster.
2. If you root you can ALWAYS go back to stock. They is a guide right here for returning to stock 2.1 and undo everything to factory.
It's kind of crude, but I wrote this for someone over at SDX-Developers to try. I think they were successful.
I don't use Macs much, but here's Joey's Permanent Root Method process I used to get it working under linux. The same method can be done through a Mac's Terminal if you're not intimidated by using command line.
First download Android-SDK for OSX.
http://developer.android.com/sdk/index.html
Once downloaded extract it and save to the root of your Mac's hard drive. Then rename the folder "android-sdk"
Next download the following files and save them to the /android-sdk/tools folder.
http://www.joeyconway.com/epic/root/joeykrim-root.sh
http://www.joeyconway.com/epic/root/jk-su
http://www.joeyconway.com/epic/root/rageagainstthecage-arm5.bin
http://www.joeyconway.com/epic/root/playlogo
Next open a terminal window. (command key + space then type terminal)
At the prompt, type "cd /android-sdk/tools"
If you save the files where I told you to, you shoud be able to copy and paste the commands into your terminal window. Do one line at a time and press enter after each pasting.
./adb push rageagainstthecage-arm5.bin /data/local/tmp/rageagainstthecage-arm5.bin
./adb push joeykrim-root.sh /sdcard/joeykrim-root.sh
./adb push jk-su /sdcard/jk-su
./adb push playlogo /sdcard/playlogo
./adb shell
chmod 755 /data/local/tmp/rageagainstthecage-arm5.bin
cd /data/local/tmp
rageagainstthecage-arm5.bin
exit
./adb shell
mount -t rfs -o remount,rw /dev/block/stl9 /system
cat /sdcard/joeykrim-root.sh > /system/bin/joeykrim-root.sh
cat /sdcard/jk-su > /system/bin/jk-su
mv /system/bin/playlogo /system/bin/playlogo-orig
cat /sdcard/playlogo > /system/bin/playlogo
chmod 755 /system/bin/playlogo
chmod 755 /system/bin/joeykrim-root.sh
exit
Click to expand...
Click to collapse
Issue for operation not permitted
I got all the way to the last paragraph of ./adb shell but cannot get the mount line to work....it says operatino not permitted. I put everything in the mac's root section just inside mac hd.
HELP!! I put hte phone in debug mode....did I need ot install any drivers from samsung....help!!!
-J
jayhover85 said:
I got all the way to the last paragraph of ./adb shell but cannot get the mount line to work....it says operatino not permitted. I put everything in the mac's root section just inside mac hd.
HELP!! I put hte phone in debug mode....did I need ot install any drivers from samsung....help!!!
-J
Click to expand...
Click to collapse
Were you able to get this working?
Root
No, I was not.
Check out this snippet of the instructions (I'll number them for ease):
<snip>
1.) cd /data/local/tmp
2.) rageagainstthecage-arm5.bin
3.) exit
4.) ./adb shell
5.) mount -t rfs -o remount,rw /dev/block/stl9 /system
</snip>
When you ran step 2, what happened? You may have to run the command this way with a dot and slash in front instead:
./rageagainstthecage-arm5.bin
When you ran step 4, did you get a $ or a #? If you got a #, step 5 should work properly. If you got a $, you'll need to do re-run the ./rageagainstthecage-arm5.bin step again. Re-running this step doesn't hurt anything. Good luck.
ss4rob said:
Check out this snippet of the instructions (I'll number them for ease):
<snip>
1.) cd /data/local/tmp
2.) rageagainstthecage-arm5.bin
3.) exit
4.) ./adb shell
5.) mount -t rfs -o remount,rw /dev/block/stl9 /system
</snip>
When you ran step 2, what happened? You may have to run the command this way with a dot and slash in front instead:
./rageagainstthecage-arm5.bin
When you ran step 4, did you get a $ or a #? If you got a #, step 5 should work properly. If you got a $, you'll need to do re-run the ./rageagainstthecage-arm5.bin step again. Re-running this step doesn't hurt anything. Good luck.
Click to expand...
Click to collapse
i'm stuck. i just got my epic and i'm trying to root it. i get to step 2 (using "./" before rage...cage) and terminal looks like it's running something. i type in "exit" when it finishes and it's as if my terminal logs me out. i can't reach step 4 and the screen on my epic has gone black by now. frozen up. i need to remove the battery to reboot and unfreeze my device. what am i doing wrong? am i missing a step somewhere? also, the "playlogo" file saves as ".sh" at the end, so in the terminal i manually enter that at the end of the file name just so that it can be read. "playlogo" without the ".sh" at the end cannot be found. is this what's causing it? any help would be greatly appreciated. i'm trying not to brick my phone!
with insecure adb you don't have to su everytime you use adb shell and you can adb remount (to remount rw your system).
You can't use the original zip (or apk) created by Paul for the ARC or SG2 because that adbd doesn't run on our device. I managed to patch the original iconia's adbd so it allows to run insecure even when our default.prop value is ro.secure=1.
Credits go to Paul O'Brien for the original hack.
Unpack the zip: http://xda.richardtrip.org/Acer/adbd/r1-insecure-iconia-a500.zip
Code:
adb push adbd /data/local/
adb push busybox /data/local/
adb push install-recovery.sh /data/local/
adb shell
su
mount -o remount,rw /dev/block/mmcblk0p3 /system
cat /data/local/busybox>/system/xbin/busybox
chmod 4755 /system/xbin/busybox
busybox --install -s /system/xbin/
mkdir /system/mcr/
cp /data/local/adbd /system/mcr/
cp /data/local/install-recovery.sh /system/etc/
chmod 4755 /system/etc/install-recovery.sh
chmod 4755 /system/mcr/adbd
rm /data/local/adbd
rm /data/local/busybox
rm /data/local/install-recovery.sh
mount -o remount,ro /dev/block/mmcblk0p3 /system
reboot
im kinda new to android. can you more detailed discribe what i should do with that. I need to remount /system to rw and i think with using this il can do it
richardtrip said:
with insecure adb you don't have to su everytime you use adb shell and you can adb remount (to remount rw your system).
You can't use the original zip (or apk) created by Paul for the ARC or SG2 because that adbd doesn't run on our device. I managed to patch the original iconia's adbd so it allows to run insecure even when our default.prop value is ro.secure=1.
Credits go to Paul O'Brien for the original hack.
Unpack the zip: http://xda.richardtrip.org/Acer/adbd/r1-insecure-iconia-a500.zip
Click to expand...
Click to collapse
Thank you so much!! =D
Worth mentioning that if you have already installed busybox (such as when initially rooting the device) you can skip those parts. Great job, and nice instructions - very detailed - should avoid too many silly questions. This will make things much easier to manage via the PC.
You should make huge red letters that tell everyone that this will finally allow them to use Droid Explorer and have full access to their internal & external storage from the PC now. This is the best thing that has happened for this device since getting root!!!
Glebaka said:
im kinda new to android. can you more detailed discribe what i should do with that. I need to remount /system to rw and i think with using this il can do it
Click to expand...
Click to collapse
Others may disagree with me, and I'm not really trying to sound rude but... if you have to ask you probably shouldn't be using this. Get more familiar with Android architecture and adb before doing it.
If for no other reason than the "INSECURE" part of it. That has ramifications and adds risk that users should be aware of when they do it. Probably minor risk, but being in security as I am, any risk is something to be mitigated.
cybermage1 said:
Others may disagree with me, and I'm not really trying to sound rude but... if you have to ask you probably shouldn't be using this. Get more familiar with Android architecture and adb before doing it.
If for no other reason than the "INSECURE" part of it. That has ramifications and adds risk that users should be aware of when they do it. Probably minor risk, but being in security as I am, any risk is something to be mitigated.
Click to expand...
Click to collapse
Yeah, the risk is that with this changed you now have root access from adb shells, without having to enter su. The tablet still needs to be physically connected to the pc to be vulnerable, and if you are in security you should know that there is no risk greater than allowing your devices to enter other people's hands. All this really does is make it easier to do things that you can already do via the pc/adb shell.
The only thing I used to regret for getting Iconia A500 was that there weren't many patches/fixes around. Now I am glad as you have given us more and more valuable things. Thanks Richard.
Can this be applied to 3.1, or is an update required?
+1 on that would be great if there was a flashable zip for 3.1
It's a trivial matter now, since Vache released a build with insecure boot, I suppose if you wanted to use another ROM you might be able to get his boot.img (or ask him to provide a zImage of the kernel to be injected in the boot.img of the rom of your choosing). I'm happy with his rom, so I don't need this right now.
I have a Verizon tab that was rooted. I updated to gingerbread which removed root. Is there a way to root now that I have gingerbread?
Thanks!
you may try SuperOneClick 2.2 with ZergRush...
Thanks. I'll give it a shot.
Soundchasr said:
Thanks. I'll give it a shot.
Click to expand...
Click to collapse
Did it work?
Haven't had a chance yet.
I tried it hangs on Step 7.. Does not root.
Sent from my SCH-I800 using xda premium
receptr said:
I tried it hangs on Step 7.. Does not root.
Sent from my SCH-I800 using xda premium
Click to expand...
Click to collapse
I've had the same problem. I can't seem to find a method that works; this Tab isn't getting much attention at all anymore.
Telling me, I have gingerbread on mine and it does nothing but forceclose crap all over the place
Lakilaulea said:
I've had the same problem. I can't seem to find a method that works; this Tab isn't getting much attention at all anymore.
Click to expand...
Click to collapse
I was able to get mine rooted by using the kernel from Galaxy Cubed 3 ROM. Downloaded the whole ROM and flashed only the kernel in heimdall. Then I used adb to push the correct files to the system and fixed permissions and rebooted. Worked great.
UPDATE:
If people want to know the adb commands I used, here they are:
adb push busybox /data/local/tmp/.
adb shell "chmod 755 /data/local/tmp/busybox"
adb shell "/data/local/tmp/busybox mount -o remount,rw /system"
adb shell "dd if=/data/local/tmp/busybox of=/system/xbin/busybox"
adb shell "chown root.shell /system/xbin/busybox"
adb shell "chmod 04755 /system/xbin/busybox"
adb shell "/system/xbin/busybox --install -s /system/xbin"
adb shell "rm -r /data/local/tmp/busybox"
adb push su /system/bin/su
adb shell "chown root.shell /system/bin/su"
adb shell "chmod 06755 /system/bin/su"
adb shell "rm /system/xbin/su"
adb shell "ln -s /system/bin/su /system/xbin/su"
adb push Superuser.apk /system/app/.
adb shell "cd /data/local/tmp/; rm *"
You can copy and paste these commands to a bat file and run it in a command prompt window. These were taken from a script used to root devices.
Here are links for the files you need. They are:
su
superuser.apk
busybox
They need to be placed in the same directory that you run the adb commands from.
SECOND UPDATE:
Rather than go through all this, go here:
http://forum.xda-developers.com/showthread.php?p=19678785
This is dsb9938's plain stock EI04 VZW ROM that is pre-rooted. Just flash in Heimdall and you are good to go. As long as you only wipe cache and dalvik, all your apps should stay intact.
Gingerbreak.apk should do the trick. Worked on my P1010
chris_toshiba said:
Gingerbreak.apk should do the trick. Worked on my P1010
Click to expand...
Click to collapse
It did not work on my VZW Tab. Someone said it is because it only works on 2.3.3 and older gingerbread and we have 2.3.5.
BTW, look at my earlier post (second update) to get a really easy way to have rooted stock 2.3.5 VZW Tab.
It took some doing, but after following the instructions in this link:
http://forum.xda-developers.com/showthread.php?t=2559915
I was finally able to root my Nook Glowlight. The instructions are kind of sprawled out and extremely unclear so I will sum up.
As always, you will need the ADB. In order to install the ADB, you need the Java Development Kit and the Android Studio (formerly known as the Android SDK)
http://www.oracle.com/technetwork/java/javase/downloads/index.html
http://developer.android.com/sdk/installing/studio.html
How to obtain root via ADB: The ONLY way you can root is using Windows. I was successful on Windows 7 32 bit, but it may be possible on other versions.
step 1) install bootloader driver.
You need to grab the drivers from here (bnusbdrivers.zip):
http://forum.xda-developers.com/showpost.php?p=49665945&postcount=279&nocache=1&z=184593200683593
then, open the Device Manager (on Windows). Be ready to right click on the new device 'omap3660' that shows.
With the nook turned completely off, plug in a USB cable. you will have less than 3 seconds to right click the new omap3660 device that shows up in the system profiler.
If you were successful and you right clicked on it in time, manually install the Barnes & Noble USB driver (there are entries added to the generic Google drivers for both the TI Omap 3660 bootloader and the ADB device after you modify the uRamdisk later on)
***NOTE***
If you WEREN'T successful on your first try (took me THREE times to get to it in time), you aren't going to get another chance to install the drivers. At least not easily anyway, because after Windows tries to automatically install the drivers for the bootloader and fails, it will disregard the device any time it shows up after that. So, you are going to need to delete the registry entries that it created, which in my experience was easier said than done. Even admin access was not sufficient to make the necessary changes to the registry.
You will need to launch regedit.exe using another tool called psexec which is available here:
http://technet.microsoft.com/en-us/sysinternals/bb897553.aspx
after you download the pstools package, copy those .exe files to C:\Windows\System32\ (in order to add them to $PATH in cmd.exe)
Then, once you've installed the pstools commands to C:\Windows\System32\, run cmd.exe as admin (right click it and select 'run as administrator') and then open regedit.exe with the following command
Code:
psexec -s -i -d regedit.exe
Then, once regedit is open you need to find the keys created by the Nook bootloader and delete them. The Nook bootloader's device ID is 0451:d00e
You are going to be looking in HKEY_LOCAL_MACHINE\Current Control Set\enum\usb\ for the keys with the bootloader's device IDs. There may also be keys generated in control set 001 and 002 as well. Delete all of those keys and then reboot your computer. Then with the nook power off completely, repeat the process from the first step. eventually you will be successful installing the bootloader driver.
Step 2) temporarily boot with uRamdisk-noogie
you need to download omaplink.exe from here:
http://www.temblast.com/android.htm
and you also need to download the four files which allow you to temporarily mount the boot partition; omap3_aboot.bin, u-boot-ng2-exp-v03.bin, uImage-ng2-130-stk and uRamdisk-noogie.
They are available here:
http://forum.xda-developers.com/showpost.php?p=49779966&postcount=285
download usbboot-ng2-images-noogie-v1.zip
The next part is easy.
Extract the .zip file and then fire up cmd.exe. cd into the directory of the newly extracted .zip
in the new working directory, enter the command
Code:
omaplink omap3_aboot.bin u-boot-ng2-exp-v03.bin uImage-ng2-130-stk uRamdisk-noogie
Then, with the Nook powered all the way off and omaplink running, plug it in and a few seconds later, after the device boots up all the way, you will be looking at the contents of the boot partition instead of the internal storage like normal.
Step 3) Edit uRamdisk
you will need to download bootutil.exe from here
http://www.temblast.com/android.htm
copy bootutil.exe to C:\Windows\System32
with the boot partition mounted, copy uRamdisk to your computer and extract the files init.rc and default.prop, eg;
Code:
bootutil /x /v uRamdisk init.rc default.prop
then using notepad++ (available here: http://notepad-plus-plus.org/) edit the files as follows
default.prop
ro.secure=0
ro.allow.mock.location=1
ro.debuggable=1
persist.service.adb.enable=1
and
init.rc
comment out lines 375 and 392-399
(do this by adding a # to the beginning of the line)
uncomment line 215
(do this by deleting the # at the beginning of the line)
save both files and then repack them into uRamdisk
Code:
bootutil /r /v uRamdisk init.rc default.prop
copy uRamdisk back onto the Nook, eject the disk and power off the device. Reboot and you should be able to connect to ADB via WiFi
eg;
Code:
adb connect 192.168.0.10
replacing '10' with whatever IP your Nook is grabbing from your router.
Step 4) Full Root
at this point, you have root access via ADB only. You will not have root access in any apps like Root Explorer, Terminal, TiBackup, etc.
In order to finish PROPERLY rooting your Nook, you need to install 'su' to /system/bin/ and install the superuser.apk
Code:
adb connect 192.168.0.10
adb shell mount -o remount, rw /system
adb push su /system/bin/
adb shell chmod 6755 /system/bin/su
adb install superuser.apk
reboot your device one more time and then you will be fully rooted.
*** Note ***
this devices firmware seems to be a strange hybrid between donut and eclair, although it purports itself to be Android 2.1. The Superuser.apk and su binary came from an old Cyanogenmod 4.6 build in case anyone was wondering (Android Donut). The ones from Cyanogenmod 5 (Android Eclair) do not work. you will get the 'install failed older sdk' error.
installing busybox
I tired installing busybox by using the stericson busybox pro.apk. It would always freeze at 6.47%.
I figured out that if I grabbed an older version of the busybox binary and pushed it to /system/xbin manually and then chmodded it to the proper permissions, auto updates and proper symlinking work using the busybox app
Code:
adb shell mount -o remount, rw /system
adb shell mkdir -p /system/xbin
adb push busybox /system/xbin
adb shell chmod 6755 /system/xbin/busybox
adb install busybox.apk
Then reboot, and run the busybox app to update and create symlinks.
enjoy!
installing nano and bash
Code:
adb connect 192.168.0.10
adb shell
mount -o remount, rw /system
adb push nano /system/xbin/
chmod 6755 /system/xbin/nano
adb push bash /system/xbin/
chmod 6755 /system/xbin/bash
bash
mv /system/bin/sh /system/bin/sh.bak
ln -s /system/xbin/bash /system/bin/sh
chmod 6755 /system/bin/sh
adb push profile /system/etc/
adb push terminfo /system/etc/
and then in terminal emulator under 'Preferences' change the initial command to
Code:
export TERMINFO=/system/etc/terminfo;export TERM=linux;export HOME=/sdcard;
and finally
Code:
adb push bashrc /sdcard
adb shell
mv /sdcard/bashrc /sdcard/.bashrc
exit
nano works just fine via ADB, but because of lack of 'ctrl' key (and physical buttons to assign it to) you won't be able to write files (ctrl+o) using the terminal on your nook. But between having full proper root access, busybox, a proper bash terminal emulator and nano for editing config files, this should REALLY extend the usefulness of your Nook Glowlight. It should work just fine on other versions of Nook too.
Hi N00b-un-2,
Many thanks for your summary!
There is one important edit that I think you missed,
in init.rc you also need to:
Line #375, comment out "disabled" with a # at the start of the line.
(see http://forum.xda-developers.com/showthread.php?p=49070213#post49070213)
without this I couldn't get adb to connect.
And since you already made it very noob friendly, might I suggested you clarify:
Line #215 remove # to enable adb over wifi
(rather than search for 5555)
Also, I'm not expert, but I believe the commands to get superuser on the device are (at least it worked for me):
adb connect 192.168.x.x
adb shell mount -o remount, rw /system
adb push su /system/bin/
adb shell chmod 6755 /system/bin/su
adb install superuser.apk
Finally, I'm not sure if this is important, but maybe remount system as read only again:
adb shell mount -o remount, ro /system
Thanks again, nice work!
---------- Post added at 01:48 PM ---------- Previous post was at 01:10 PM ----------
Hi again,
had similar issues with installing busybox, here's what worked for me (note needed to run su to create dir):
adb shell mount -o remount, rw /system
adb shell /system/bin/su
adb shell mkdir -p /system/xbin
adb push busybox /system/xbin
adb shell chmod 6755 /system/xbin/busybox
adb install busybox.apk
cheers.
As far as remounting /system as ro, I would HIGHLY recommend just rebooting at this point, otherwise your nook might be stuck in a weird pseudo-rooted state. Probably won't cause any problems, but why risk it?
Thanks for clarifying the line number. I will make the appropriate edits to my instructions. I was working off the top of my head and couldn't remember what exact line the ADB over TCP config was, as I just used ctrl+w '5555' to find it myself.
There are several pre-edited uRamdisk images floating around the forum with various features enabled which would be easier for noobs than extracting the config files and manually editing and then repacking them. In the future I'll probably throw those on here as well.
darz said:
Hi N00b-un-2,
Many thanks for your summary!
There is one important edit that I think you missed,
in init.rc you also need to:
Line #375, comment out "disabled" with a # at the start of the line.
(see http://forum.xda-developers.com/showthread.php?p=49070213#post49070213)
without this I couldn't get adb to connect.
And since you already made it very noob friendly, might I suggested you clarify:
Line #215 remove # to enable adb over wifi
(rather than search for 5555)
Also, I'm not expert, but I believe the commands to get superuser on the device are (at least it worked for me):
adb connect 192.168.x.x
adb shell mount -o remount, rw /system
adb push su /system/bin/
adb shell chmod 6755 /system/bin/su
adb install superuser.apk
Finally, I'm not sure if this is important, but maybe remount system as read only again:
adb shell mount -o remount, ro /system
Thanks again, nice work!
---------- Post added at 01:48 PM ---------- Previous post was at 01:10 PM ----------
Hi again,
had similar issues with installing busybox, here's what worked for me (note needed to run su to create dir):
adb shell mount -o remount, rw /system
adb shell /system/bin/su
adb shell mkdir -p /system/xbin
adb push busybox /system/xbin
adb shell chmod 6755 /system/xbin/busybox
adb install busybox.apk
cheers.
Click to expand...
Click to collapse
N00b-un-2 said:
There are several pre-edited uRamdisk images floating around the forum with various features enabled which would be easier for noobs than extracting the config files and manually editing and then repacking them. In the future I'll probably throw those on here as well.
Click to expand...
Click to collapse
Would have been good if I could have easily found a pre-edited image, but your instructions were a great alternative, thanks again
darz said:
Would have been good if I could have easily found a pre-edited image, but your instructions were a great alternative, thanks again
Click to expand...
Click to collapse
Sorry for the really noob question, I have rooted, wifi adb running and installed apps as per your instructions, but I can't seem to access any of it on the nook. How can I get access to the launcher I installed?
You mentioned pre-edited images, do any of those come with the apps I need to get access to a custom launcher?
Cheers,
Dariusz
==============
Updated: All sorted
==============
For some reason had some issues with ADW launcher, Launcher pro worked fine.
ps I think I made a mistake with the su step I suggested, if you run a one line shell command I don't think it keeps su privileges, so I believe you need to run commands within the shell as per below:
adb shell
mount -o remount, rw /system
/system/bin/su
mkdir -p /system/xbin
exit
adb push busybox /system/xbin
adb shell chmod 6755 /system/xbin/busybox
adb install busybox.apk
Noob
Hey guys any instructions noob friendly or a video in youtube,i stick up at dab connect 192.168.0.10.I dos't have a Windows PC and using Mac whit Parallels Desktop.Is it possible instructions for Mac?
The above instructions from N00b-un-2 should work fine running a vm with parallels on your Mac.
OB
Sent from my SPH-D710VMUB using Tapatalk 2
valentin1985 said:
Hey guys any instructions noob friendly or a video in youtube,i stick up at dab connect 192.168.0.10.I dos't have a Windows PC and using Mac whit Parallels Desktop.Is it possible instructions for Mac?
Click to expand...
Click to collapse
Before you perform the adb connect step you need to find out what your IP address is:
On your nook, click on the settings icon in the top right corner and then select "Change"
Under Wireless Networks, select the wifi name that you are already connected to (where it says "Connected to the internet")
This will display your connection details, remember that IP address
Now go back to your pc and type:
adb connect [IP address]
darz said:
Before you perform the adb connect step you need to find out what your IP address is:
On your nook, click on the settings icon in the top right corner and then select "Change"
Under Wireless Networks, select the wifi name that you are already connected to (where it says "Connected to the internet")
This will display your connection details, remember that IP address
Now go back to your pc and type:
adb connect [IP address]
Click to expand...
Click to collapse
BIG HINT! If you're using Powershell ISE, you have to type .\adb.exe connect [IP address] or else it won't recognize "adb" as an executable!
Don't ask why, because I don't know. :?
thenookieforlife3 said:
BIG HINT! If you're using Powershell ISE, you have to type .\adb.exe connect [IP address] or else it won't recognize "adb" as an executable!
Don't ask why, because I don't know. :?
Click to expand...
Click to collapse
So far so good,but now what?
valentin1985 said:
So far so good,but now what?
Click to expand...
Click to collapse
I just gave a little tip on Powershell ISE. I do not know much about the Nook GlowLight rooting process, as I have a NSTG, not a NG. Ask someone else.
thenookieforlife3 said:
I just gave a little tip on Powershell ISE. I do not know much about the Nook GlowLight rooting process, as I have a NSTG, not a NG. Ask someone else.
Click to expand...
Click to collapse
Yes,i try whit dis command .\adb.exe connect 192.168.0.9 but result is the same.
valentin1985 said:
Yes,i try whit dis command .\adb.exe connect 192.168.0.9 but result is the same.
Click to expand...
Click to collapse
But that's okay! What I said was, if you are using the command program Powershell ISE, do it that way instead. But you are just using cmd.exe, not Powershell ISE!
In cmd.exe, which is what you are using, it is not neccessary to type .\adb.exe. Just type adb.
From there, ask someone else in this thread.
thenookieforlife3 said:
But that's okay! What I said was, if you are using the command program Powershell ISE, do it that way instead. But you are just using cmd.exe, not Powershell ISE!
In cmd.exe, which is what you are using, it is not neccessary to type .\adb.exe. Just type adb.
From there, ask someone else in this thread.
Click to expand...
Click to collapse
I prefer to use ConEmu or Console2 when I am forced to use Windows. Not a big fan of CMD.EXE or Powershell/PowershellISE. there are plenty of other CLI alternatives out there
N00b-un-2 said:
I prefer to use ConEmu or Console2 when I am forced to use Windows. Not a big fan of CMD.EXE or Powershell/PowershellISE. there are plenty of other CLI alternatives out there
Click to expand...
Click to collapse
Well, as I ONLY use Windows and Powershell ISE has a nice-enough layout for my purposes, I use it. That's why I gave a tip on it.
Actually on a lot of installs just typing adb in the command console won't work either unless it's got the path variable set up correctly, I find it easiest to just right click and choose run as administrator, no need for the path to be setup.
OB
Sent from my SPH-D710VMUB using Tapatalk 2
FW 1.2.1
Hi guys,
thanks for creating this thread. I was wondering if this rooting procedure was tested with the firmware 1.2.1 ?
real-6 said:
Hi guys,
thanks for creating this thread. I was wondering if this rooting procedure was tested with the firmware 1.2.1 ?
Click to expand...
Click to collapse
This rooting procedure is for the new Nook GlowLight with firmware 1.3.1. Your device is a Nook Simple Touch with GlowLight, which can be rooted very easily using the rooting package here.