Hi
I have a big problem and don't know what is wrong
I was using ultimate droid on nand on my hd2,than i decided to flash shiftpda rom v33 from boyPPC and the problems started. i installed it from my sd card using cwm and when phone rebooted first time magldr said something about missing kernel file. then i tried to flash it again,did task 29 several times,installed magldr and everything again. but it kept saying about missing kernel file. and when i try to install it again cwm says 'installation aborted'. so i decided to flash it from pc with daf.exe. installation was successfull,but phone just reboots over and over again... looks like it will never stop rebooting. dont know what to do please help...
can it be due to wrong radio?
zurjap said:
Hi
I have a big problem and don't know what is wrong
I was using ultimate droid on nand on my hd2,than i decided to flash shiftpda rom v33 from boyPPC and the problems started. i installed it from my sd card using cwm and when phone rebooted first time magldr said something about missing kernel file. then i tried to flash it again,did task 29 several times,installed magldr and everything again. but it kept saying about missing kernel file. and when i try to install it again cwm says 'installation aborted'. so i decided to flash it from pc with daf.exe. installation was successfull,but phone just reboots over and over again... looks like it will never stop rebooting. dont know what to do please help...
Click to expand...
Click to collapse
Can you explain the exact steps you made to install this Rom?
well i will explain what am i'm doing right now. i run task 29 and installed radio 2.15.50.14. after that i installed mgldr 1.13. and on mgldr booting screen it said "sd open kernel failed". after that mgldr menu appears. then i choose usb flasher and install rom from the computer. it says installation successful and phone reboots. after that i see mgldr booting screen and everything looks just fine,then i see HTC screen and phone reboots again...and again and again and again. if i will just put the phone on the table it will just keep rebooting forever ((( am i doing anything wrong? i shouldnt because its not the first rom i am installing...and what does that "sd open kernel failed" message mean??? (
1) First of all, boot into MAGLDR and go to services (option 10). Go to boot settings, Boot source and make sure Android from Nand is selected.
2) Unzip the Boyppc v33 package on your computer and install his CWR DAF package that is included with the rom (The boot loops could be due to having the wrong CWR partition)
3) Load CWR and manually wipe data/factory reset, Go into advanced and wipe Dalvik Cache. Once this is done try and reinstall the V33 zip that you said you had already copied to your SD card. Hope this solves the problem
I've had the same problem twice now. "sd open kernel failed" i believe is shown in red correct? all i did to fix it was reflash MAGLDR & Clockworkmod Recovery then reflash the ROM.
i wish i knew why it happened but its always when im going from 1 ROM to the next & not just restarting my phone up. im thinking maybe it was just a bad flash or something but the steps above has fixed it for me now both times.
try to install recovery and intall a ron throught ur sd card ... rom that r instaleed from daf r pretty simple but maybe the rom was corrumpted during the download or there's a missing file that's not flashed to ur phone ... i suggest to install recovery and to copy ur rom to sd ...it's much simple than the first way
Related
Hello
I wonder if anyone can help me with this problem.
nand kernel open faild i get this after i installd magldr1.11 and then CWM.
I have don everyting from the video YOUTUBE.
at first he did it and after installing a few rom`s he stopt .
i down`d wath to do nou.?????
Sorry for my bad english
snoop1 said:
Hello
I wonder if anyone can help me with this problem.
nand kernel open faild i get this after i installd magldr1.11 and then CWM.
I have don everyting from the video YOUTUBE.
at first he did it and after installing a few rom`s he stopt .
i down`d wath to do nou.?????
Sorry for my bad english
Click to expand...
Click to collapse
after installing cwm, restart you phone...at the bootscreen hold power button and go to magldr again...select the first option which is 'boot ad sd' or something like that...and there you go ur inn cwr mode...and select the zip file and install ur thang!!!
praveshrizal said:
after installing cwm, restart you phone...at the bootscreen hold power button and go to magldr again...select the first option which is 'boot ad sd' or something like that...and there you go ur inn cwr mode...and select the zip file and install ur thang!!!
Click to expand...
Click to collapse
I have don that to but if i do that en he reboots i get the same.
nand kernel open faild
same problem for me
error say : Nand Kernel open failed
aMAGLDR 1.12
Same issue here.
Are you sure that what you are trying to install is actually a CWM compatible zip file?
What are you trying to install - can you give us a link?
It's MDJ's latest build. I was using CWM from the original thread dedicated to it here. It seemed like it installed fine, but that's the error I am getting afterwards.
If I get the CWM files from MDJ's ZIP it doesn't even go into CWM after selecting AD SD, but shows MDJ's Android boot logo(I guess it actually installs at this point), then a few minutes later reboots, tries to boot into Android, displays the error in red, then shows aMAGLDR menu.
any updated on this fix..... i have been researching for passed few hours with no luck.
bad kernel open fail
All,
currently I’m running CynogenMod 7 Typhoon Nightly-Desire TyphoonN v3.2.1-MGLDR on my HD2.
When I try to upgrade to any later version I get error “NAND Kernel open fail” after the installation is completed. I get the same results from all download sources, MIUIANDROID (any version), different formatted SD cards and even if I do the downloads from my phone thru the Market CWM Rom Manager.
Downloaded from:
http://forum.xda-developers.com/showthread.php?t=933951
Any suggestions would be greatly appreciated.
I almost forgot, I've tried MGLDR 111, 113 and two versions of CWM Recovery no difference. Please help!!!
Thanks,
Nery.
after I flash with CWM, I get this when it trys to boot android "nand kernel open failed"
Also, in CWM, I get "E:Can't find misc"
installing nand without CWM works.
bump- I searched and didn't find anything helpful. I've tried 3 different roms
"Can't find misc" should only appear if you don't have a misc partition in NAND. (which is created when flashing CWM)
And nand kernel open failure probably means theres no zImage or initrd.gz in the boot partition.
Try flashing CWM from the CWM thread and then a ROM.
Gabe3 said:
after I flash with CWM, I get this when it trys to boot android "nand kernel open failed"
Also, in CWM, I get "E:Can't find misc"
installing nand without CWM works.
Click to expand...
Click to collapse
How did you transfer the zip file to SD? Did you use magldr? If so try re-transfering using your comp, as Magldr sometimes corrupts them.
Ricey
I have this same problem. I reflashed cwm and now i dont get the misc but no matter which rom i install from cwm i always get the kernel error =\
d34thd34l3r said:
I have this same problem. I reflashed cwm and now i dont get the misc but no matter which rom i install from cwm i always get the kernel error =\
Click to expand...
Click to collapse
just redo everything. that fixed it for me.
Bump.
Did a clean install of TyphooN CyanogenMod 7 Nightly v3.3.1 and got the "nand kernel open failed" error.
I formated the SD-Card two times, reinstall cwm 150mb partition 3 times and still get the same error, first time within almost 1 year of android on my HD2 ._.
Any ideas or solutions welcome.
and another bump and sorry for my bad english =)
i get the "nand kernel open failed" error too.
i installed radio and hspl 2.08
then flashed MAGLDR 1.13
continued with CWM (250mb)
then formated my sd-card und put TyphooN CyanogenMod 7 on it
after installation, i get the error.
redid all 2 times now, nothing works.
NEED HELP ^^
Likewise i am getting it with hyperdroid v12
I've just got it with HD2 NDT MIUI GINGER ROM V13.0 Multilang :/ I reinstalled magldr,clm and the rom and formated in clm but still get the error! :S
[★] said:
I've just got it with HD2 NDT MIUI GINGER ROM V13.0 Multilang :/ I reinstalled magldr,clm and the rom and formated in clm but still get the error! :S
Click to expand...
Click to collapse
i say you have to do a clean wipe starting fro scratch task 29 it ad redo
bckstn said:
and another bump and sorry for my bad english =)
i get the "nand kernel open failed" error too.
i installed radio and hspl 2.08
then flashed MAGLDR 1.13
continued with CWM (250mb)
then formated my sd-card und put TyphooN CyanogenMod 7 on it
after installation, i get the error.
redid all 2 times now, nothing works.
NEED HELP ^^
Click to expand...
Click to collapse
me too same massege
bckstn said:
and another bump and sorry for my bad english =)
i get the "nand kernel open failed" error too.
i installed radio and hspl 2.08
then flashed MAGLDR 1.13
continued with CWM (250mb)
then formated my sd-card und put TyphooN CyanogenMod 7 on it
after installation, i get the error.
redid all 2 times now, nothing works.
NEED HELP ^^
Click to expand...
Click to collapse
Typhoon doesn't use 250mb CWM, use the one provided with rom 150MB System/5MB Cache (ClockworkMod Recovery v3.0.2.5), most "nand kernel open failed" are down to wrong CWM size
I'm getting the same error, but only with sense 3.0 roms. Any other roms I've used have installed have worked. Is there a certain step I'm missing with installing sense 3.0 roms? I'm using MAGLDR v1.13 and Clockwork Recovery Mod v3.0.2.5. I flashed recovery_150m_cache_5m.zip onto the phone using magldr usb flasher. Any ideas?
cludseph said:
I'm getting the same error, but only with sense 3.0 roms. Any other roms I've used have installed have worked. Is there a certain step I'm missing with installing sense 3.0 roms? I'm using MAGLDR v1.13 and Clockwork Recovery Mod v3.0.2.5. I flashed recovery_150m_cache_5m.zip onto the phone using magldr usb flasher. Any ideas?
Click to expand...
Click to collapse
150mb for sense rom is definitely to low!
Read the rom's thread carefully guys!
It says there what CWR partition is needed.
Sense roms need SD CARD PARTITION so read the thread (it's first page).
If you have read it and your CWR partition looks exactly as it was given in the rom's thread then do task29, hspl, magldr 1.13 and CWR.
If it still doesn't work try different roms or try CLK.
Thanks for the response. How do I create a 5/240/5 partition through CWR? The last partition I made was just installed through .zip on CWR. Sorry for the questions, new to the hd2.
do all beginners understand this? you are probably putting the 'clk' version of the rom in your storage card for installation. you need the 'magdlr' version of the rom for clockwork mod to correctly install android
musashiz said:
do all beginners understand this? you are probably putting the 'clk' version of the rom in your storage card for installation. you need the 'magdlr' version of the rom for clockwork mod to correctly install android
Click to expand...
Click to collapse
Hi guys, i had the same problem, and i figured maybe i can show u what i did, to help u.
i went to THIS thread and followed the instructions:
"Installation Guide for MAGLDR 1.13"
the error occured right after i flashed the MAGLDR_CWM_Recovery_v3.2.0.0_for_NexusHD2_135M.zip onto my HTC HD2.
the only thing i had to do was enter magldr boot menu (hold off button while booting)
then i choose AD RECOVERY
CWM started up and i choose install zip from SD card
ofcourse i have placed NexusHD2-Gingerbread_V3.0_NAND_(Android-2.3.5).zip onto the ROOT of my SD card previously.
the .zip file installed perfectly and then i rebooted my phone.
all was ok after that..
hope this helps!
musashiz said:
do all beginners understand this? you are probably putting the 'clk' version of the rom in your storage card for installation. you need the 'magdlr' version of the rom for clockwork mod to correctly install android
Click to expand...
Click to collapse
Awww, that was my mistake. It's working with the MAGLDR version now. Thanks for pointing that out
musashiz said:
do all beginners understand this? you are probably putting the 'clk' version of the rom in your storage card for installation. you need the 'magdlr' version of the rom for clockwork mod to correctly install android
Click to expand...
Click to collapse
No we do not, thank you, this helped.
Hello guys!
I don't know what to do anymore...
I used to have wm6.5 Hyperdroid1.7(sd) dualboot, but it began to freeze very often to the point where i could't boot it anymore. Since I had hspl2.08 allready installed, I decided to give the relatively new TyphooN CyanogenMod 7 v2.5.2
(http://forum.xda-developers.com/showthread.php?t=933951)
a try.
Long story short, I had lots of problems with the connection but finally made it to
task29: done (used doloops exe)
radio: 2.15.50.14 done
magldr: 1.13 done
ClockworkMod Recovery v1.3 135M System/44M Cache:
installed with DAF.exe
but when I selected 'AD recovery' in magldr it came up with the
1FATAL HIT 1 error. (worked one time when I left the battery out for 25 min, but never again)
So I decided to do everything over again, task29 etc ....
Some problems occured where I had to plug out the phone because it got
stuck in flashing process of task29/radio/magldr.
And now, nothing works, I can flash radio and magldr, but it does'n seem to affect anything. When I boot I just see just the white htc screen.
Tried to flash stock HTC-wm6.5-rom (with both bootloaders) but it gets stuck @ 8% and gives the wrong comand error.
So please help me, 2 days without a phone (so far ...)
daniel
U UNPLUGGED IT!
Try a task29 .. just a task29 with a compatible radio
Once its done go into the bootloader.. if you get this far flash MAGLDR
If and once MAGLDR boots up then your good to go with Android NAND/SD or WP7
Okay,
I task29'ed it with the 2.15... radio and it seemed to work again.
But I flashed with a nand android and when I booted again:
Booting Android from NAND
ANDROID LOAD at numbers
yaffs2 part is /boot
Load zImage
Load initrd.gz
[K] .. numbers
Load done!
1EFATAL HIT 1
*stuck*
may be relevant:
when I flashed the android it did not reboot automatically.
so i pressed the red reset button on the back.
thedangeroiusd said:
Okay,
I task29'ed it with the 2.15... radio and it seemed to work again.
But I flashed with a nand android and when I booted again:
Booting Android from NAND
ANDROID LOAD at numbers
yaffs2 part is /boot
Load zImage
Load initrd.gz
[K] .. numbers
Load done!
1EFATAL HIT 1
*stuck*
may be relevant:
when I flashed the android it did not reboot automatically.
so i pressed the red reset button on the back.
Click to expand...
Click to collapse
That's an android nand issue..prob kernel related... since you used the DFT android flasher it should've restarted... either try again with the same rom or different rom OR use clockwork recovery... i personally use CWM recovery.. since it has more options like installing from zip and backup/restore entire nand build to the sdcard
also note magldr mass storage .. some people say it corrupts transfer so to safe use card reader just incase when transfering
Sent from my HTC HD2 using XDA App
Ok lets try this Remove your SD card Save only necessary files that you need to your computer. Next Format the SD card leave it out.
I would erase the task 29 and MAGLDR and partition and ROM files from your computer and reinstall (possible file corruption)
Do a Task 29
Install MAGLDR 1.13
Once you install MAGLDR let phone reboot and hold power button to boot into MAGLDR
Choose option 5 and load your partition
Next reboot into MAGLDR again and got to option 8 you will want to find wipe data/factory reset and also wipe dalvik cache.
Now if you are flashing via CWM you should have the build on the SD card so now is the time to put SD card back in and reboot into MAGLDR you can then flash the rom. If you are flashing DFT put card back in reboot phone and enter bootloader and flash DFT.
Hope you get it working please read carefully...pm if you are really stuck.
The ONLY thing you are going to flash via MAGLDR option five is your partition...Did you flash the radio via MAGLDR if so that may be your problem?
If that dont work try this:
Try and use a task29 tool provided here http://forum.xda-developers.com/show...3&postcount=19 . Extract it and run it properly ( with phone in bootloader mode ) and perform the task 29. Then flash a radio version which you can find it here http://forum.xda-developers.com/showthread.php?t=611787 . ( I suggest 2.15 )
My suggestion is to go to bootloader-tricoloured screen ( NOT Magldr ). Flash a good radio version and afterwards go back to tricoloured screen of the bootloader in order to flash a Windows Mobile ROM ( preferably a STOCK one ). Forget about NAND ROMs until you will be sure what your problem is.
PS : Read here for more information http://forum.xda-developers.com/showthread.php?t=609477
I have a european HTC HD2 running MAGLDR 1.3 and I cannot install Clockworkmod under any circumstances. I've been running MDJ's Cyanogenmod 7 for weeks now and have the correct radio and hspl, but every time I attempt to flash clockwork I get a message saying NAND kernel open failed when I try to boot AD Recovery. I've tried both the NAND boot and the old style SD boot with no luck whatsoever. I'm now totally stumped and unable to get any of the new ROMS. Thanks in advance for any help you can give.
Can you give us the exact steps you have taken?
This way we can see if you missed something.
Thanks for the response,
Installed radio and hspl, then magldr 1.11 (this is the setup I'd been using for a while). Today I tried to install clockworkmod so I upgraded to magldr 1.13 at the tri color screen. That seemed to work fine, all the functions working perfectly. I then downloaded cwm 1.3 150mb and tried to install (USB flash, ran as admin etc.) The install seemed to go alright but when I tried to boot into recovery I got the error message. I ran into the same problem using the method where you put files on the SD first and using the script to install magldr 1.13 and cwm one after the other.
i had problems with cwm 150 installer. i ended up getting the 250 meg version, and editinf flash.cfg, worked first time.
Did you use AD SD or AD Recovery (option 8 )?
AD Recovery is the one to use.
t3h_cookie_monster said:
Thanks for the response,
Installed radio and hspl, then magldr 1.11 (this is the setup I'd been using for a while). Today I tried to install clockworkmod so I upgraded to magldr 1.13 at the tri color screen. That seemed to work fine, all the functions working perfectly. I then downloaded cwm 1.3 150mb and tried to install (USB flash, ran as admin etc.) The install seemed to go alright but when I tried to boot into recovery I got the error message. I ran into the same problem using the method where you put files on the SD first and using the script to install magldr 1.13 and cwm one after the other.
Click to expand...
Click to collapse
I've used both and neither worked, they both result in nand kernel open failed. Its unable to find initrd or the other file no matter what i do.
Sounds like the file recovery.raw (or is it recovery.img, i forget) didn't get flashed, please confirm there is a recovery image included with the cwm files you are installing, and also please paste us the contents of your flash.cfg. file.
Try flashing 400mb clockwork mod.most roms require this mod and it does work
Sent from my HTC HD2 Gingerbread using XDA App
I got it to work by using the 250mb version with edited flash file! Thanks a lot for all the help.
arzin said:
Try flashing 400mb clockwork mod.most roms require this mod and it does work
Sent from my HTC HD2 Gingerbread using XDA App
Click to expand...
Click to collapse
hello, Im currently having the same problem...how did you edit the flash size?
Oaraujo said:
hello, Im currently having the same problem...how did you edit the flash size?
Click to expand...
Click to collapse
open the file flash.cfg in notepad on the pc, edit the number in the system line (you will see what i mean when you see it) change it, save it, flash it.
nand kernel open failed
you are probably putting the 'clk' version of the rom in your storage card for installation. you need the 'magdlr' version of the rom for clockwork mod to correctly install android
Same problem with NAND karnel fails
I bought my HTC HD from my friend at work, it had installed, android aMAGLDR V1.13 I had a problem to erase my friends gmail account from the phone and when ever i connect to the Internet his account appears to log on and sync, I tried to reset the phone but I failed, now I tried ti flash the android regarding gunjahman's Flashing a new nand android rom over a previous one http://forum.xda-developers.com/showthread.php?p=11302885#post11302885
and I flashed with Recovery_400M and now I'm in Boot menu and can't get it to boot or anything else.
Can please anyone help me???
:victory:****** Solved *******
Hi, thank you for all of your help and assistance.
It was all down to selecting the correct partitions (and me getting over enthusiastic in flashing roms and not reading FULLY on how and what partitions are required)
I have used HD2 Nand toolkit, and partitioned MAGLDR, then partitioned SD card within Clockworkmod.
Thank you all again for pointing me in the right direction...
Good Evening All,
I am sorry if this has been covered. I have searched the forums but cannot find an answer.
I have read all the FAQ and How-to's.
I am not an exact newbie, I have owned a HD2 before (about 2 years ago) and could install all sorts of different roms (including NAND)
I have Installed my Radio 2.15.50.14
I have installed HARD SPL 2.08
I have Installed MAGdlr 1.13
I ahve installed clockwork mod recovery 1.3 with 400M
Copied rom to root of SD Nexus HD2 jellybean v1.2 [dataonext]
and I have installed Nexus HD2 jellybean v1.2 [dataonext]
this installed fine,
I then decided to try another,
I downloaded QSEA_JB-MUSIC EDITION_V1 and placed on root of SD,
I booted into Magldr, then into clockwork mod
from here i wipe data, and factory reset,
wipe cache partition
and wiped delvic cache.
Then i install zip from sd card QSEA_JB-MUSIC EDITION_V1
when this is done,
It asks me to reboot,
Then it stays on the boot screen, and the rom does not load.....
I can restore the back up from the original rom install. but whatever rom I install (from Nand rom downloads) none of them install...
Please help...
Matt
matt_tee said:
Good Evening All,
I am sorry if this has been covered. I have searched the forums but cannot find an answer.
I have read all the FAQ and How-to's.
I am not an exact newbie, I have owned a HD2 before (about 2 years ago) and could install all sorts of different roms (including NAND)
I have Installed my Radio 2.15.50.14
I have installed HARD SPL 2.08
I have Installed MAGdlr 1.13
I ahve installed clockwork mod recovery 1.3 with 400M
Copied rom to root of SD Nexus HD2 jellybean v1.2 [dataonext]
and I have installed Nexus HD2 jellybean v1.2 [dataonext]
this installed fine,
I then decided to try another,
I downloaded QSEA_JB-MUSIC EDITION_V1 and placed on root of SD,
I booted into Magldr, then into clockwork mod
from here i wipe data, and factory reset,
wipe cache partition
and wiped delvic cache.
Then i install zip from sd card QSEA_JB-MUSIC EDITION_V1
when this is done,
It asks me to reboot,
Then it stays on the boot screen, and the rom does not load.....
I can restore the back up from the original rom install. but whatever rom I install (from Nand rom downloads) none of them install...
Please help...
Matt
Click to expand...
Click to collapse
1-Why? Use the HD2 NAND Toolkit to partition your system according to the developer.
2- Never reboot directly from the "reboot now" option of amarullz's installer. Instead, uncheck the "reboot now" option, click finish and reboot manually from CWM.
(The reboot option somehow makes your rom not boot, at least that happens to me every time)
Marvlesz said:
1-Why? Use the HD2 NAND Toolkit to partition your system according to the developer.
2- Never reboot directly from the "reboot now" option of amarullz's installer. Instead, uncheck the "reboot now" option, click finish and reboot manually from CWM.
(The reboot option somehow makes your rom not boot, at least that happens to me every time)
Click to expand...
Click to collapse
Thanks,
I will give it a go!
Have already downloaded toolkit, and just watching the video on how to use...
Matt:fingers-crossed:
So, do I just use Magldr to partition and don't install CWM?
I tried to re-partition with CWM, but lost magldr.....
What am I doing wrong?
Still cannot install NAND rom.
Going to do Task 29 again, where from there??
Thanks for your help and patience...
try the links below, it might help
matt_tee said:
So, do I just use Magldr to partition and don't install CWM?
I tried to re-partition with CWM, but lost magldr.....
What am I doing wrong?
Still cannot install NAND rom.
Going to do Task 29 again, where from there??
Thanks for your help and patience...
Click to expand...
Click to collapse
I don't use magldr, so I am not sure.
But I think you have to "MAGLDR recovery update" first, and then after it finishes you have to "magdlr repartition". Im not sure though.
How do I just install clockwork mod? Without using Magldr?
If I Task29 first,
What's my next step.....?
After Task29 (don't do task29 again) you have to do the following: http://forum.xda-developers.com/showthread.php?p=25781675#post25781675 until you see the "recovery" .. from there, dont continue to flashing wp7, just put your rom on your sd and flash it from recovery. (don't forget to thank the the one who made the thread/guide)
Don't forget to NOT use 300mb, but use the one written on your rom's thread.
matt_tee said:
How do I just install clockwork mod? Without using Magldr?
If I Task29 first,
What's my next step.....?
Click to expand...
Click to collapse
You can't have CWM without MAGLDR. If you've flashed CWM you shouldn't have lost MAGLDR at all, so I don't know what you did wrong. Task 29s are also almost always useless and unnecessary, if a guide says 'task 29' as the first step then usually you can just skip that part. I find that the best guide is the one in my sig, try it out.