Here I leave with you for being my birthday my private Rom, which I use. This rom is the fastest I've tested so far
I have removed:
-- Cube
-- HTC Home
-- Welcome
-- Pictures and photos unserviceable
-- QuickGPS
I added:
-- Today LG
-- PHM Registry
-- Modaco no data
-- PDC clock
-- Clean up temporary
-- Pocket screamshot
-- Pimbackup
--...
Pd: leaves about 69mb of Ram free jejeje note that it is clean, ----------------69mb free programs--------131.22mbof storage
Obligatory Hardreset BEFORE FLASH.
Bug: knowledge of LG TODAY:
-- Does not work or direct access "games"
-- Bluetooth does not work the other by what is going fine
if you like my work can help me DONATE
LINK TO DOWNLOAD http://www.todopdas.es/showthread.php?p=98604&posted=1#post98604
Video in that you can see the rom HERE http://www.youtube.com/watch?v=12W5hloZM1s
sorry for my bad english if a word is "bad" sorry me, i use google traslate
reserved to answer quetions
GooDDay, Hola etc,
Did you know that the amount of Female Users has been growing?
Good Luck on Your Clean Rom.
Sorry for my lenguage but the google traslate failed. in next post i use other trasnlater and a dictionary
Put images of the podium today LG please.
Cheers
Sorry, had not seen the video link
Cheers
lol, if you want i can send you a lg.cab in spanish but this lgtoday in spanish haven't all bottons that lgtoday in english
Please post a miror to download this rom... thx
Por favor, un enlace para descargar la rom que no sea un foro que se tiene que registrar como usuario... muchas gracias de barcelona..
To: Jose Antonio
what do you think of this rom? Have you tried it. i'm also from Spain, and I'm actually using Khanx to me is the best so far for us. What do you think.
I'm asking you because you see quite an expert¡¡
Thanks, gracias,
planagan said:
what do you think of this rom? Have you tried it. i'm also from Spain, and I'm actually using Khanx to me is the best so far for us. What do you think.
I'm asking you because you see quite an expert¡¡
Thanks, gracias,
Click to expand...
Click to collapse
hi planagan you can use this rom is very very fast and this rom is clean but it has a lot of program, an example: phm registry, modaco nodata, gfinder, contactpm, cleam up temporaly, pocket scream shot... this rom has disable touch flo and thanks that it come to 69 mb ram and 131 of storage
try this rom
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
:::::::::::: DESCRIPTION :::::::::::::
Hi, here is my second Rom. I was totally impressed by CM7. The speed, the battery life, everything was better as MIUI was. The only think I hated was the design. Therefore, I created a nice looking CM7 Rom with a lot of great Tweaks, Mods and extra Apps.
It is nothing special. I added some MIUI and ICS styles or Apps to get some MIUI or ICS feeling. All Apps are either available through XDA or the Android Market.
This Rom is based on Kang and Jordon and should work on most Defy and Defy+, even the new 2.3.6 Kernels. Also camera and battery should work 100%.
The new Version includes AROMA Installer by Amarullz. This is a great feature and I love it. Every of you can choose the tweaks, mods and apps during the installation with touch support. If not working properly you can use Volume Keys and Power Button, like in CWM. BIG THANK goes to Amarullz for his great tool.
Also a big THANKS to skeevy420, who changed the Rom to Support also Motorola Bravo Device. Therefore, it should now work on 3 devices, but support will be provided in the Motorola Bravo Forum.
FEATURES::::::::
based on CM7 Kang 22.03 / Jordan 27.02
Now also with Motorola Bravo Version
With Aroma Installer and Touch Support
Aroma Installer in 6 languages available
WIFI PowerSave / Zipalign / Juve's Ram Mod
Different Wifi + GPS Settings ( optional )
VSuite Voice Dealer ( ICS port from Maniac103 )
V6 SuperCharger Script
Beats Audio Support
Pdroid Treiber and App
Defy+ Battery Support
Bravia Engine Mod
SmoothScroll and VolumeIncrease Tweak
Media Sound Folder is created on SD Card ( thx maniac103 )
extra Soundfiles / Bootanimation
DNS set to Google Server ( SetDNS not needed )
CPU Settings a little bit untervolted
ICS Standard Font
ICS or CM7 Bootanimation
ICS Transition and Screen Rotation
AppWidgetPicker
Rom Toolbox ( optional )
Google Apps ( optional )
GoLauncher Ex with NewMIUI Theme
Second Boot Settings ( everything is set perfectly after the second boot )
Custom Recovery 5.0.6
Miui Explorer Port
Google Play Store and Music
Hacked Google Apps
Updated Google Apps
DSP Manager and STK ( optional ) )
APN List and Adfree Host File
Motorola Apps ( optional )
MIUI Ports and alternatives ( optional )
build.prop Tweaks and Fingerprint set to MB526
and some other stuff
::::::::::::: LANGUAGES ::::::::::::::
CM7 Kang Languages = German, English, Espanol, French, Catalia, Cestina, Dansk, Georgian, Hebrw, Hrvatski, Indonesian, Italiano, Latviesu, Lietuviu, Nederlands, Polski, Protuguese, Romana, Slovencina, Suomi, Svenska, Tagalog, Tieng Viet, Türkce, Urdu, and many more
Aroma Installer Languages = German, English, Espanol, Italian, Brazilian Portuguese, Serbia, French, Swedish
:::::::::::::::::::::: Installation IMPORTANT ::::::::::::::::::::::::::
CM7 is not like MIUI, we need to set some stuff manually. Of course everything works out of the box and the ICS CM7 Theme is set automatically, but to get the perfect WhiteRabbit Feeling we need to set some options. Installation is really easy with Aroma Installer and you can choose every Tweak, Mod or App during the installation. I recommend the MIUI Apps and specially GoLauncher! This have to be set :
to get the perfect WhiteRabbit Feeling
choose at the first boot "GoLauncher" as your Standard Launcher and set it to forever
click on your HomeScreen on your MenuKey on your Defy and choose "Themes" and activate "NewMIUI Theme"
click again on your HomeScreen on the MenuKey and open up the "Preferences" of GoLauncher. Click on "Visual Settings" -> "Icons" -> and choose "Icon size" to "Large Size"
still in the GoLauncher Settings -> click on "App drawer settings" and choose under "App Drawer Scrolling orientation" -> "Vertical continous"
back on the HomeScreen click on the Phone App and choose "exDialer" as your favorite Dialer ( if installed )
open up "MiLocker" ( if installed ) and click on "Settings" at the bottom -> choose "Miui Default" or "ICS" Theme to get rid of chinese symbols
So now you should have a fast and nice designed system. Hopefully everything works for you and have a look at Settings, CM7 has even more options as Miui has.
:::::::::::::::::::::: DOWNLOAD ::::::::::::::::::::::::::
DOWNLOAD WhiteRabbit Bravo Edition v.1.4.1
nur für Motorola Bravo / MD5 = 8146bdce8a13e276ef083858281e9034
Have fun with it and I would be happy about some feedback
:::::::::::::::::::::: BUGS and INFOS ::::::::::::::::::::::::::
Bravo users may experience issues with GoLauncher on first boot. GoLauncher works fine after reboot.
Bravo users need to boot into 2nd-init. 2nd-boot will not boot the system.
Defy+ User with 2.3.6 will have mostly a Force Close at their first boot with SystemUI, which is the notification bar. Just reboot once and everything will be ok.
User with problems in installation could try to install Pikachu Edition and back WhiteRabbit Edition, some Users reported that it helped.
Call Recording could have some problems with alternative apps
The normal Dialer and Contact App can't be uninstalled if exDialer is installed. It is only a visual App. If you uninstall the Dialer and Contact App you won't get any calls, even exDialer is installed.
If Milocker is activated you won't be able to use PIN or any other SecurityLock. This is not a Bug, it is because Milocker deactivates the Lockscreen and is only an App.
Airplane Mode can lead on some phones to lose the connection to your mobile provider, specially Defy+ Users
:::::::::::::::::::::: DONATION ::::::::::::::::::::::::::
Hi, it takes a lot of time to create these Roms, support the Users with help and fix bugs. I am doing it for free and it makes fun, but if you want to support me your are free to donate me a beer.
:::::::::::::::::::::: CREDTIS ::::::::::::::::::::::::::
Thanks to Amarullaz, Sesme, maniac103, nadlabaks, skeevy420, currydude, ephumuris, Boogieman, Mark, [email protected], Kang, RATTAR, Dirk 64, maniac103, cile und Wajk, M1cha, Nexx, el afortunado, annowob, Daihogo, outmixx, Ralf, hboy1337, Akki, pulleman, Vorkkernel Team, Andy, Andy Thomson, endursa, dewyeyed, majamee, chron, ladyboo, woSaa, Galnet, derbestimmer, MagicMarcus, Jackmu95, Gerrett, t1MzN, Mamboo5, Zjs, thinka, bodo-riediger and everybody from MIUI-Germany.de Community, Android-Hilfe.de, XDA-Developers.com and all the people I forgot.
A big thanks goes to M1cha, and my Test Users: andk, Vetzki, Leitn, Dirk64, Squerk, Akki, Senci, AlMustanir, Kalain, Elmo1986, M1cha, powerschumi, modmatt, Codi11, wurmhoschi, schuelf.
Special Thanks goes to the Users who donated me: PassiMC, Ralph, Michael, FlO, Annette. Thomas, Death-Marco, nomeansno , Harald, Martin, Christian, Raxman, Dortking, c_nutz, Igor, horst37, Arno, Manuel, Toasti, TomShi, Husi10, Ulrich, kartargo
1.4.1 Update
***I only updated the installer to include French and Swedish, and removed the 2nd-boot warning; NO need to update if you're already running WR 1.4 since only the installer was updated. The Defy 1.4.1 removed the Volume Step Mod, I left it in ours since nobody has posted problems with it.***
work
skeevy420 said:
For the past week, I've been helping TweetyPeety to add native Bravo support in White Rabbit 1.4. The first testing was released yesterday and I installed it a few hours ago, and its running nicely after a slight script edit.
To install, you HAVE to change the updater-script with the one I provided and boot in 2nd-init (ignore what the installer says). Already PM'd Tweety fix and asked about 2nd-boot.
Other than the above, it seems great. All I've seen are small, theme related issues resolved by reinstalling or installing a theme. Nothing serious. I used the underlying rom for the past week to see if there were issues with it on the Bravo, there weren't.
If you have any issues that are BRAVO related, post them here and I'll try to help as best as I can and relay the problem (and hopefully a fix) to Tweety. If its rom related, go here to White Rabbit's Thread over at the Defy forums.
Install as usual.
Detailed install instructions coming when White Rabbit installs properly on Bravo.
Remember, this is the alpha build, not everything may work correctly.
######################
######################
Replace /META-INF/com/google/android/updater-script
in the rom's zip with my attached updater-script (inside archive)
before installing or the rom won't boot. Then boot in 2nd-init and enjoy.
######################
######################
Link to White Rabbit Test1: Here ya go
Issues:
Theme Chooser ICS Theme not set as Default
no exDialer ICS Theme
Parts of English installer in German
Bravo issues above (fix provided)
I've only used it for long enough to install and make some posts
Oh, and Thank You Tweety for another wonderful rom.
Click to expand...
Click to collapse
Work full..?
UPDATED INFORMATION
Everything but notification power widget and rotation sensor issues. I believe both are just incompatible libs. Have to go to work so can't do any romming until I get off.
If the problem is what I think it is, it will be fully working with correct /system/lib/hw
EDIT:
After accidently selecting wipe data instead of wipe cache, I performed a reinstall and EVERYTHING WORKS PERFECTLY. I'm not sure why. Maybe I had a bad install???
I used the same zip, same changes (first post attachment) and same installer settings. Only issue is the ICS Theme Chooser theme wasn't selected by default. Other
than that I believe its fully working.
Found cause of rotation/noti power widget bug
Enabling 180 degree rotation causes the bugs with both rotation sensor and and the notification power widget. The fix is to not enable 180 degree rotation under Settings/CyanogenMod Settings/Display/180 Degrees.
While I don't know why bug occurs, at least I know why the reinstall fixed the problem. Also unsure if port bug or rom bug. I'll update when I know more.
first of all,, you not bothering me, I would like to make my Rom compatible to Bravo
second,,, yeah you have been right, still some German in my English translation, saw some c and k's and some German Text for clock yeah so many strings, have to do it also in Spanish.
third,,, included some if that aks for bravo and deactivated with the Second Boot Settings Mod ( you know you have to boot one more time after coming into the system to activate it, no way to make it the first boot, because database is not created at this time ) the 180 degree rotation
fourth,,, the changes in your updater-script, that are the same as you already have send me, because couldn't find any big difference..
fifth,,, thanks for the feedback with the ICS Theme at the beginning, you see I can't really test it and normally on the Defy I saw it in the last Version and removed the 2 code lines from my default build.prop, haven't seen it in the Bravo, but its fixed also.
anything else ??
Some of those pm's yesterday could have waited till I had more informtion with other things, instead of a bunch of tiny pm's with scattered information. That's what I meat by bothering you.
I posted an updated english translation in the first post that I did yesterday. I think it's completely translated. The phrases aren't in proper english and missing prepositions, but everthing is clear and understandable, and I'm being a bit of a grammer nazi about it at this point. "Grammer nazi" isn't offensive to Germans is it? I'm mostly German, with a bit of Dutch and tiny, tiny bit of Native American.
I tried booting up 3 time with 2nd-boot, it never got past the red motorola dot. I'll look over the 2nd-boot and see if I can figure out why, although 2nd-init works perfectly.
Don't konw the cause of the 180 bug either. When it's buggy, logcat is clean, nor do any errors show when 180 is enabled either. I need a user with a Defy to see if it's the rom or the Bravo.
With those two lines removed, everything workes fine with the theme.
You could test the Bravo install on a Defy if you wanted to, the only thing that won't work correctly is the camera.
The only issue I see left is that the touch press color on the reboot/shutdown menu is orange instead of blue. I don't know the location of its xml to help with.
I really can't think of anything else at the moment. It worked perfectly yesterday on a range of tasks from batch TB restore, gps, compass, camera, wifi, tethering. Well, I might have had a minor wifi bug....I took my dogs for a walk, and when I got back I had to disable and then reenable wifi to get it to connect. It may have been me in a hurry and not wanting to wait for Android to do it automaticly. I've had little wifi issues like that since the new screen off wifi power policy was implemented.....I don't like it. Its a pita when you data tether with wifi. Now I HAVE to use wifi keep alive. Phone gets really hot when the screen has to stay on AND your downloading at 1.5mbps.
The undervolting may be a bit low for the Bravo, its not for me, but my phone runs stable with [email protected], [email protected], [email protected] And yes, those are my clock speeds when I need the extea power. Some Bravo's cant even run [email protected] stable. I think the Bravo may be made with not-up-to-par Defy parts. I planned on adding that in the release info when the rom gets released.
If everything I've sent you gets added into the rom, the next release will probabaly be the Bravo stable release.
While its off topic, when undervolting your phone, you'll get more instability from the two lower values being too low than the high value being too undervolted. My phone is PERFECTLY stable with the above settings, but if I go to [email protected] and [email protected], it is EXTREMELY unstable. Also, to do a quick undervolt stress test, while listning to music, just open 6+ tabs in Dolphin HD at the same time then start pressing random links. If it doesn't crash you're usually good to go.
Test2 was released\bumping thread
skeevy420 said:
Test2 was released an hour and a half ago. I've been using it for the past half an hour and its working great.
Boot with 2nd-init instead of 2nd-boot.
CHANGELOG TEST 2:::::::::::::
NEW Miui V.4.0 CM7 Theme optional
NEW Vsuite Voice Dailer ( thx Maniac103 )
NEW Hacked Google Maps 6.4
NEW German Baseband ( only for Germans )
NEW Pdroid Support optional
UPDATE Basis Kang 7.2RC from 21.03
UPDATE Custom Recovery 5.0.6
UPDATE Aroma Installer 2.0 A5
UPDATE Installer now also in Italian, Spanish, and Serbia
UPDATE Miui Explorer optional ( in 8 languages )
UPDATE exDialer 67
UPDATE GoLauncher 2.8.3
UPDATE Second Boot Settings
FIX Volume Steps Mod
FIX No Bootloop at first boot
DELETE Beats Audio drivers ( the doesn't work on most of the phones )
Link to White Rabbit 1.4 Test2
Posted from my 48" 1080p WS running Debian Sid with internet Wifi Tethered from a Motorola Bravo running White Rabbit Test2.
Click to expand...
Click to collapse
Is there any modififcation needed to the zip file or is it already ok for the Motorola bravo?
sent from my Motorola Bravo running CM7 White Rabbit Edition 1.3 with my added Beats Audio and Bravia Engine!
Just install it. Nothing needs to be done.
work
marquae11 said:
Is there any modififcation needed to the zip file or is it already ok for the Motorola bravo?
sent from my Motorola Bravo running CM7 White Rabbit Edition 1.3 with my added Beats Audio and Bravia Engine!
Click to expand...
Click to collapse
full work..?
Yes. Fully working and great. I only had issues when restoring apps with titanium batch with app+data, but that can happen with any rom. The OC vsel settings may be low. That varies phone to phone. To be safe, move Vsel 2 and 3 up one each, and Vsel 1 can actually go to 22. I've used 22 with every rom I've ever used. Some roms can handle 21-19, but 22 I've found is stable and reliable.
I've had minor theme issues, but that's probably because I used custom install and had mixed miui and ics settings. Just play with the Rom Toolbox and you'll be themed however you like in no time.
thanks
skeevy420 said:
Yes. Fully working and great. I only had issues when restoring apps with titanium batch with app+data, but that can happen with any rom. The OC vsel settings may be low. That varies phone to phone. To be safe, move Vsel 2 and 3 up one each, and Vsel 1 can actually go to 22. I've used 22 with every rom I've ever used. Some roms can handle 21-19, but 22 I've found is stable and reliable.
I've had minor theme issues, but that's probably because I used custom install and had mixed miui and ics settings. Just play with the Rom Toolbox and you'll be themed however you like in no time.
Click to expand...
Click to collapse
been waiting for this moment and thank you very much skeevy420
Forgot to mention, only boot in 2nd-init. Its says 2nd-boot, but I guess that only works on the Defy.
So have I. Now I can't wait for test3 or the 1.4 final. TweetyPeety put a lot of hard work into this rom. Try to go out of the way and click his thanks button, all I did was bug test and give him our camera libs and changes for the build.prop.
mataflakitas said:
full work..?
Click to expand...
Click to collapse
Seems to be.
sent from my Motorola Bravo running CM7 White Rabbit Edition 1.3 with my added Beats Audio and Bravia Engine!
help
skeevy420 said:
Forgot to mention, only boot in 2nd-init. Its says 2nd-boot, but I guess that only works on the Defy.
So have I. Now I can't wait for test3 or the 1.4 final. TweetyPeety put a lot of hard work into this rom. Try to go out of the way and click his thanks button, all I did was bug test and give him our camera libs and changes for the build.prop.
Click to expand...
Click to collapse
some instructions how to install the rom that I can freeze the image to start and all via e seen no white rabbit 1.4 test 2 which was my mistake ..?
for beginners
---------- Post added at 05:24 AM ---------- Previous post was at 05:10 AM ----------
marquae11 said:
Seems to be.
sent from my Motorola Bravo running CM7 White Rabbit Edition 1.3 with my added Beats Audio and Bravia Engine!
Click to expand...
Click to collapse
Help for installing this rom ...?
It installs the same as any cm7. Wipe data/ cache/ dalvik/ install. I've installed 3 times no problem. Can't help more. Have to get to work.
ok
skeevy420 said:
It installs the same as any cm7. Wipe data/ cache/ dalvik/ install. I've installed 3 times no problem. Can't help more. Have to get to work.
Click to expand...
Click to collapse
hey friend had to return to 2.2 does not froyo which was my mistake and I have root but how to install apk outside SndInitDefy_2.0 market (1). apk install is not as aid
---------- Post added at 02:56 PM ---------- Previous post was at 02:17 PM ----------
mataflakitas said:
hey friend had to return to 2.2 does not froyo which was my mistake and I have root but how to install apk outside SndInitDefy_2.0 market (1). apk install is not as aid
Click to expand...
Click to collapse
all these steps but did not happened
is spanish rom work white terabbite ...?
mataflakitas said:
hey friend had to return to 2.2 does not froyo which was my mistake and I have root but how to install apk outside SndInitDefy_2.0 market (1). apk install is not as aid
---------- Post added at 02:56 PM ---------- Previous post was at 02:17 PM ----------
all these steps but did not happened
Click to expand...
Click to collapse
Google 2nd-init defy you should find the forum for it and download 2.0
sent from my Motorola Bravo running CM7 White Rabbit Edition 1.4 Test 2
ayuda
marquae11 said:
Google 2nd-init defy you should find the forum for it and download 2.0
sent from my Motorola Bravo running CM7 White Rabbit Edition 1.4 Test 2
Click to expand...
Click to collapse
marquae11 you speak spanish
hello friend already I made all the steps but and everything goes very well at the time of initiating only remains in the beginning image you can put a tutorial like installing
Google desafía 2-init APK y descargar la versión 2.0. la instalación de la recuperación en la aplicación (asegúrese de que su la última versión) y reiniciar el sistema y no debería ser una luz LED azul y el volumen presione hacia abajo cuando la veas) utilizar los botones de volumen para desplazarse hacia abajo a la recuperación a continuación, presione el botón de encendido para seleccionar . a continuación, seleccione la recuperación personalizado. ir a limpiar la caché de datos o seleccionar que sí. y luego ir a avanzado y limpiar caché Dalvik. luego vaya a instalar el código postal de la tarjeta SD y seleccionar la postal de la rom que desea instalar y pulse YES. y debe levantarse de instalación de aroma y pulse el idioma y el bravo de Motorola en la pantalla táctil y su auto bastante explicativa de allí. después de la instalación haya finalizado se reiniciará y si bootloops o se bloquea en el logotipo de la M acaba de sacar la batería y ponerla de nuevo y debe arrancar. preguntar si necesita ayuda más.
Hi All,
I just install 5.8.014s Developer ROM ( Le Max X820 ). I can't go Recovery to install other *.Zip packet. I have to try install other Recovery (TWRP ) but not run. Please help me...
Be careful with EUI 5.8, overwrite radio images and then you can´t go back to EUI 5.6.
Take a look in www.letv.re, I remember that read something about it.
If I find anything I told you.
Me too. I installed EUI 5.8.014s and after several reboots an attempts to get playstore working properly I decided to go back to backup as @UNDR8D83 described. It loaded but it didnt work. On reboot I got looping and with TWRP the half blue screen and the the blue led. Hard reset gets out of blue led and I can start fastboot. It gives okay x2 for flashing TWRP( i tried the Chinese-worked previously, and gemini didnt work previously, but both give half blue screen flashing followed by blue led.
Help please !!!!
it seems the 'blue led of death' is a soft brick haha didnt think in 2016 u could still brick android devices but yer
also when making a backup make sure to turn off all fingerprint/pattern/pin passcodes as i found out the hard way after loading backup it couldnt get past the lock screen
UNDR8D83 said:
it seems the 'blue led of death' is a soft brick haha didnt think in 2016 u could still brick android devices but yer
also when making a backup make sure to turn off all fingerprint/pattern/pin passcodes as i found out the hard way after loading backup it couldnt get past the lock screen
Click to expand...
Click to collapse
Good to know with that password errors. Thanks!
yup took me a few hours of countless wiping flashing and rebooting to realize this haha
airspace3000 said:
Hi All,
I just install 5.8.014s Developer ROM ( Le Max X820 ). I can't go Recovery to install other *.Zip packet. I have to try install other Recovery (TWRP ) but not run. Please help me...
Click to expand...
Click to collapse
You need to describe better if you want sbdy to help
5.8.014 already has compatible TWRP.
Why you want to flash other non combatible TWRP ?
If you run into problem extract rec.img from 5.8.014 zip and overwrite via adb command. Check the forum and please don't double post existing issue.
Cheers
I have done a totally clean install. I wiped everything on SD, system, data, cache, dalvick and then booted into recovery. I then transferred 5.8 zip, along with SuperSu, and gapps to the phone from PC. Flashed the dev zip, SuperSu.zip rebooted and installed Google play. Deleted all the Chinese Le-bloat and installed Apex launcher, Google Chrome, Google keyboard and Google photos. Good to go. Had an antutu score this morning of 140491. I have the 4 GB, 32 GB version.
UNDR8D83 said:
it seems the 'blue led of death' is a soft brick haha didnt think in 2016 u could still brick android devices but yer
also when making a backup make sure to turn off all fingerprint/pattern/pin passcodes as i found out the hard way after loading backup it couldnt get past the lock screen
Click to expand...
Click to collapse
Hi,
There's a workaround for this...
Boot into TWRP. Go to "Advanced" and then "File Manager". Navigate to "data/system" and delete these 2 files : "gatekeeper.pattern.key" and "locksettings.db".
Reboot... and reconfigure your security settings (delete existing fingerprints and enter new ones).
Done.
Hi,
OTA for 5.8 15S just arrived on my phone this morning. Just updated it and everything seems to be working. PlayStore is OK. All my apps seems to work correctly.
So, it may be better to wait for it ?
Tof29 said:
Hi,
OTA for 5.8 15S just arrived on my phone this morning. Just updated it and everything seems to be working. PlayStore is OK. All my apps seems to work correctly.
So, it may be better to wait for it ?
Click to expand...
Click to collapse
Salut, tu es en français ou en anglais sur cette version ?
merci
Je suis en franglais... Applis en francais mais système en anglais (et 2 menus en chinois dans les settings mais sans importance)
Installation de morelocale2 necessaire si la rom précédente n'avait pas le francais,sinon il reste.
Tof29 said:
Je suis en franglais... Applis en francais mais système en anglais (et 2 menus en chinois dans les settings mais sans importance)
Installation de morelocale2 necessaire si la rom précédente n'avait pas le francais,sinon il reste.
Click to expand...
Click to collapse
Le système est en français (avec des sous-menu des fois anglais voir des fois chinois ) avec play, gapps,... Je l'ai reçu en version 55.66.001133s (stable), la màj se fera par ota ? C'était peut etre pas la meme version que tu avais ?
Oui, tu peux essayer de lancer une recherche de maj dans les settings. Moi il me l'a proposée sans rien faire.
---------- Post added at 09:43 AM ---------- Previous post was at 09:43 AM ----------
J'étais en 5.6.0 14S il me semble...
jim262 said:
I have done a totally clean install. I wiped everything on SD, system, data, cache, dalvick and then booted into recovery. I then transferred 5.8 zip, along with SuperSu, and gapps to the phone from PC. Flashed the dev zip, SuperSu.zip rebooted and installed Google play. Deleted all the Chinese Le-bloat and installed Apex launcher, Google Chrome, Google keyboard and Google photos. Good to go. Had an antutu score this morning of 140491. I have the 4 GB, 32 GB version.
Click to expand...
Click to collapse
Hi, Your info is very important to many international users. be kind and tell us from where did U took the 14S installation ? Recovery via the VolumeDown+Power ? worked well ?
10x
Gil
gkaz said:
Hi, Your info is very important to many international users. be kind and tell us from where did U took the 14S installation ? Recovery via the VolumeDown+Power ? worked well ?
10x
Gil
Click to expand...
Click to collapse
I do not understand what you are trying to say, but everything was taken from this website. Do a search and follow directions and you will be fine.
jim262 said:
I do not understand what you are trying to say, but everything was taken from this website. Do a search and follow directions and you will be fine.
Click to expand...
Click to collapse
Update info - I received the LeMax2 with International ROM based on 13S........ I download the Stock ROM 15S from the http://bbs.le.com//zt/eui/le_max2.html. copy as update.zip to the phone root, went Vol Up+Power and with the simple EUI Recovery directly update.
No need for any root or TWRP ......keep it simple
Went so perfect and smooth upgrade, kept all my data - I was surprise how easy was it.
anyone with International version and no OTA menu - go for it. 15 minutes and U are on stock ROM and OTA updates.
I am glad you had a successful stock upgrade. This is the method for upgrade from LeEco using stock recovery. What I recommended was for a cleaner experience, so one root and remove Chinese apps/bloatware plus easy way to install Google Play (post in discussion). There are always multiple ways to do things, it all depends what your goals are.
Hi guys and girls,
yesterdays, my Nexus 4 started to act up extremly and it just wouldn´t want to wake up to Lineage, while the screen did lit up, but stied black. So I thought I just resest Lineage to default, but it was a big mistake. After resetting in Lineage menu, the phone started into bootloader and there was no OS and I couldn´t even get into TWRP as well. In conclusion, I´ve decided to fire up NexusToolKit and restore it to stock and just do it all over.
Restoring to stock worked fine, flashing TWRP went fine as well, but when I tried to install Lineage "Error 7" accured. Thing is, the phone won´t be recogniced by Windows or NexusToolKit at all anymore. Even when I manually enter bootloader and press ok it´s just "No device connected".
Is there anything left, I can do to unbrick it?
LOoOnARTs said:
Hi guys and girls,
yesterdays, my Nexus 4 started to act up extremly and it just wouldn´t want to wake up to Lineage, while the screen did lit up, but stied black. So I thought I just resest Lineage to default, but it was a big mistake. After resetting in Lineage menu, the phone started into bootloader and there was no OS and I couldn´t even get into TWRP as well. In conclusion, I´ve decided to fire up NexusToolKit and restore it to stock and just do it all over.
Restoring to stock worked fine, flashing TWRP went fine as well, but when I tried to install Lineage "Error 7" accured. Thing is, the phone won´t be recogniced by Windows or NexusToolKit at all anymore. Even when I manually enter bootloader and press ok it´s just "No device connected".
Is there anything left, I can do to unbrick it?
Click to expand...
Click to collapse
Did you try a different cable?
Nitin
LOoOnARTs said:
Hi guys and girls,
yesterdays, my Nexus 4 started to act up extremly and it just wouldn´t want to wake up to Lineage, while the screen did lit up, but stied black. So I thought I just resest Lineage to default, but it was a big mistake. After resetting in Lineage menu, the phone started into bootloader and there was no OS and I couldn´t even get into TWRP as well. In conclusion, I´ve decided to fire up NexusToolKit and restore it to stock and just do it all over.
Restoring to stock worked fine, flashing TWRP went fine as well, but when I tried to install Lineage "Error 7" accured. Thing is, the phone won´t be recogniced by Windows or NexusToolKit at all anymore. Even when I manually enter bootloader and press ok it´s just "No device connected".
Is there anything left, I can do to unbrick it?
Click to expand...
Click to collapse
instale stock otra vez, asi se reparticiona el n4. seguro es que el pc no lo reconoce. luego siga las instrucciones para conectarlo nuevamente con nexusToolkit.
Luego de eso vuelva a rom personalizado. esta usando lineage 16 seguro. debe reparticionar para eso. yo lo uso con 8.1.1. no he querido poner 9.
traduzca... suerte.
MOD EDIT: translation (made with google translate)
install stock again, so the n4 is distributed. Surely the PC does not recognize it. then follow the instructions to connect it again with nexusToolkit.
After that return to custom rom. You are using lineage 16 for sure. You must deal for that. I use it with 8.1.1. I did not want to put 9.
translate ... luck.
revalero said:
instale stock otra vez, asi se reparticiona el n4. seguro es que el pc no lo reconoce. luego siga las instrucciones para conectarlo nuevamente con nexusToolkit.
Luego de eso vuelva a rom personalizado. esta usando lineage 16 seguro. debe reparticionar para eso. yo lo uso con 8.1.1. no he querido poner 9.
traduzca... suerte.
Click to expand...
Click to collapse
Please use English language on XDA as per forum rule #4:
4. Use the English language.
We understand that with all the different nationalities, not everyone speaks English well, but please try. If you're really unable to post in English, use an online translator. You're free to include your original message in your own language, below the English translation. (This rule covers your posts, profile entries and signature). You could try :- https://translate.google.com/ or https://www.babelfish.com/ or use one of your choice.
Click to expand...
Click to collapse
I have added the corresponding translation in your post as a courtesy.
Thanks for your understanding.
Regards,
Wood Man
Senior Moderator
I have a head unit with:
Android: F9212A_00017_V001
Android OS: Android 10.1
XY Auto: F6.5 (X2)
CAN ro: 3.5(X2)
DDR: 1G
Flash: 16G
CPU: A7 1.3GHz x 4
display : 1024x600
MCU: 3.5 (X2)
And I want to make root or to install a custom rom.
Hello,
i have the same UNIT but i dont really find something information here ...
Software /Software Updates
Tipps (maybe from other units)
Root / Custom / cleaned roms
Where i can watching for Updates (original)
Maybe some Member can give me information to this unit!
Regards
me also had this unit any one can help me the bluetooth has a problem mic not good
Alexandruz3 said:
I have a head unit with:
Android: F9212A_00017_V001
Android OS: Android 10.1
XY Auto: F6.5 (X2)
CAN ro: 3.5(X2)
DDR: 1G
Flash: 16G
CPU: A7 1.3GHz x 4
display : 1024x600
MCU: 3.5 (X2)
And I want to make root or to install a custom rom.
Click to expand...
Click to collapse
Bro if you have a themes for this send to me please because i have a one like u for my car
sutarek said:
Bro if you have a themes for this send to me please because i have a one like u for my car
Click to expand...
Click to collapse
Hey guys does anyone know how to turn off this device when i press power button it goes to sleep and when i turn car off it turns off and when i turn the car back on radio turns on where it was left not showing boot logo which it should.
There is not much of documentation availabe for this product. However you can try some custom launchers like...
Car Launcher - Apps on Google Play
Launcher for use in the car
play.google.com
AGAMA Car Launcher - Apps on Google Play
Home screen for car multimedia systems for Android OS (30 day TRIAL)
play.google.com
https://play.google.com/store/apps/details?id=ru.speedfire.flycontrolcenter (Personal Favorite)
vdimov said:
Hey guys does anyone know how to turn off this device when i press power button it goes to sleep and when i turn car off it turns off and when i turn the car back on radio turns on where it was left not showing boot logo which it should.
Click to expand...
Click to collapse
Hope this helps you
Hi, I have the same unit and I accidently deleted the native navi select apk. Now the navigation shortcut on the native theme is not working. Can someone please share the navi select apk for this unit please
Hey guys I have the same unit and I was wondering how do you change the speedometer on the home screen to read MPH instead of KM/H?
Hello
Can you help me? WiFi can't see device, P30 pro mobile Hospot can't see from half a meter! Can't see the wifi in the apartment (about 2 meters), what could be the problem? Need to set something up? The device knows the hospot. Since there is no sim card receiver in the device I don't understand. Could the software be bad? How to install new software? Does anyone have new working software? Thanks for sharing. Thanks.
The problem is that i dont have wifi.
Káró György said:
View attachment 5556289
The problem is that i dont have wifi.
Click to expand...
Click to collapse
this unit support for 2.4Ghz wifi only. please check your P30 is set to 2.4Ghz. not 5Ghz hotspot.
mroslizan said:
tato jednotka podporuje pouze 2,4 GHz wifi. zkontrolujte, zda je váš P30 nastaven na 2,4 GHz. ne 5GHz hotspot.
Click to expand...
Click to collapse
Mě to funguje na 5G. Chyba jinde. Zkus kamaráda, ktery ti poskytne hotspot. Kojac
I need help
I have a f9212a i need a rom
hello I have the same unit and I added an external cd player.
But when i plug it nothing happen.
Can someone help me please?
I have a problem install Android 10 on my Android radio but the resolution is 1024x600 now the screen looks too big how can I solve that problem?
Hi this is the newest official update:
http://filedown.xygala.com/uploads/XY%E5%85%AC%E7%89%88/9212/9212B-9212BF/%E5%AE%89%E5%8D%9310.0/%E5%A4%96%E6%96%87/%E6%A8%AA%E5%B1%8F/%E5%9F%BA%E7%A1%80%E5%8C%85/XYAUTO_7.3.8/gongban_9212B_hwok-ota-v7.3.8.zip
After the update many bugs are fixed. Only problem is that when i go backwards the reverse camera always turns on but i don't have an reverse camera. Tried to delete backcar.apk but it is protected and need root to delete it. Do you know a way how to delete it?
Also google play does not work but it is fixable. Also do you know how is packed this update - system.new.dat.br and is there a way to modify its content?
prpetrov said:
Hola, esta es la última actualización oficial:
http://filedown.xygala.com/uploads/...AUTO_7. 3.8/gongban_9212B_hwok-ota-v7.3.8.zipDespués de la actualización, se corrigieron muchos errores. El único problema es que cuando voy hacia atrás, la cámara de marcha atrás siempre se enciende, pero no tengo cámara de marcha atrás. Intenté eliminar backcar.apk pero está protegido y necesita root para eliminarlo. ¿Conoces alguna forma de eliminarlo?
También google play no funciona pero es reparable. ¿También sabe cómo está empaquetada esta actualización: system.new.dat.br y hay alguna forma de modificar su contenido?
Click to expand...
Click to collapse
amigo cual es la actualizacion donde la encuentro