Hi everybody i am just asking what is the best multitouch (dualtouch) module?
Ur new huh?
If you have synaptics : use x8 gesture by doixanh
If you have cypress : use multitouch module by andyx
Hope i helped
Wyslalem z mojej zajebistej x8
There are two types of digitizers. Each one can run a module created by either doixanh or andyx. You can't choose whatever module you want. You will choose the module according to your digitizer.
You have Cypress - you use Andyx's module
You have Synaptics - you use Doixanh's module
sorry if I intrude into the discussion ..
I have frobread 0.30 but I can not activate the multi-touch so I think I have cypress.
how do I activate it
How do I install it???
Where do I put the module
sorry for my bad english i used google translate
a.n.d.r.e. said:
sorry if I intrude into the discussion ..
I have frobread 0.30 but I can not activate the multi-touch so I think I have cypress.
how do I activate it
How do I install it???
Where do I put the module
sorry for my bad english i used google translate
Click to expand...
Click to collapse
To see what digitizer you have, do this:
Open "Terminal Emulator" on your phone and type
dmesg | grep "cyttsp-i2c"
If you have something like this:
<6>[ 4.185259] cyttsp_i2c_probe: Successful registration cyttsp-i2c
...You have Cypress Digitizer.
If you get something like this:
[2.520489] < 4 > cyttsp – i2c: probe of 0-0024
failed with error - 12
...You have Synaptics Digitizer.
If nothing shows up after you type that, try writing it without the quotes. If still nothing shows up, reboot your phone.
unfortunately i have cypress
can you write me how to install the multi-touch?
The XPERIA X8 has no multi-touch ¬ ¬ '
Only has a module that simulates the dual-touch, but the true dual-touch he does not, unfortunately...
understood
But how can I install this module dual touch
Salo-S said:
The XPERIA X8 has no multi-touch ¬ ¬ '
Only has a module that simulates the dual-touch, but the true dual-touch he does not, unfortunately...
Click to expand...
Click to collapse
He does not? Its real mt! Just see the video about it.
Sent from my X8 using Tapatalk
a.n.d.r.e. said:
unfortunately i have cypress
can you write me how to install the multi-touch?
Click to expand...
Click to collapse
Dude!!! You're lucky! You can have real Dual Touch!
Look here:
http://forum.xda-developers.com/showthread.php?t=1135965
file Chris95X8 grafw to dmesg | grep "cyttsp-i2c" kai mou leei permission denied...Ti kanw?
Asigratitos4 said:
file Chris95X8 grafw to dmesg | grep "cyttsp-i2c" kai mou leei permission denied...Ti kanw?
Click to expand...
Click to collapse
You have Synaptics which is capable of fake Dual-Touch thanks to doixanh.
Go to the link and follow the instructions there on how to install it.
http://forum.xda-developers.com/showthread.php?t=1004740
that's right boss!!
Chris95X8 said:
You have Synaptics which is capable of fake Dual-Touch thanks to doixanh.
Go to the link and follow the instructions there on how to install it.
http://forum.xda-developers.com/showthread.php?t=1004740
Click to expand...
Click to collapse
huh?? That doesn't mean that he has Synaptics!
Asigratitos4 said:
file Chris95X8 grafw to dmesg | grep "cyttsp-i2c" kai mou leei permission denied...Ti kanw?
Click to expand...
Click to collapse
you have to type "su" (without the quotes) first and then the command!
As i said thousands, there are 2 sticky threads for talk about Multitouch.
Related
Hello ....
I am on that looks for the HtcUI for sony x8 I have seen with yotube a video and I must say it looks hammer and would do this with pleasure somebody has tip?? Sorry my English is absolutely rotten
iblack22 said:
Hello ....
I am on that looks for the HtcUI for sony x8 I have seen with yotube a video and I must say it looks hammer and would do this with pleasure somebody has tip?? Sorry my English is absolutely rotten
Click to expand...
Click to collapse
so install the HTC framework..
Tehouster said:
so install the HTC framework..
Click to expand...
Click to collapse
How to install framework-res.apk ?
I search but can not find a good explanation about it for x8.
id_kriso said:
How to install framework-res.apk ?
I search but can not find a good explanation about it for x8.
Click to expand...
Click to collapse
It's simple, framework located in /system/framework, something like that, I don't remember exact name... Easiest way is to mount system from xrecovery...
iblack22 said:
Hello ....
I am on that looks for the HtcUI for sony x8 I have seen with yotube a video and I must say it looks hammer and would do this with pleasure somebody has tip?? Sorry my English is absolutely rotten
Click to expand...
Click to collapse
I think thats just a Launcher + LockBot app
blagus said:
It's simple, framework located in /system/framework, something like that, I don't remember exact name... Easiest way is to mount system from xrecovery...
Click to expand...
Click to collapse
kad hrvat kaze da je jednostavno, onda je jednostavno
The process of getting a jury-rigged Sense on the x8 is a lot more complex than simply finding a launcher that suits your needs and the widgets to go with it.
Try i.e LauncherPro.
id_kriso said:
How to install framework-res.apk ?
I search but can not find a good explanation about it for x8.
Click to expand...
Click to collapse
use root explorer, mount R/W and just simply replace the framework, reboot and enjoy.
or use the xRecovery, for the safe.
How to delete OC module? I want to be back to 600Mhz
Sent from my Nexus-X8 using Tapatalk
you need to delete x8oc.ko in system/lib/modules.
I might be wrong but:
Remove the line of OC module from hw_config.sh
And delete file x8oc.ko from modules
delete the file x8oc.ko at the folder /system/lib/modules/
Nexus rom v2
Sent from my Nexus-X8 using Tapatalk
silentw said:
I might be wrong but:
Remove the line of OC module from hw_config.sh
And delete file x8oc.ko from modules
Click to expand...
Click to collapse
sorry i forgot the line....... xD
brunodmsa said:
sorry i forgot the line....... xD
Click to expand...
Click to collapse
you can also put a "#" in front of the insmod line instead of removing it if you want to have overclock later without adding the line again
I dunno, maybe i must do a thread in all languages because it seems to me that it is hard for people to DO NOT POST YOUR QESTIONS IN DEVELOPMENT FORUM, it is so difficult?
Moved to general .
Hi..sorry for my nob question...
but how to
Instruction for manual installation:
- Remount /system as rw
- Copy the attached x8gesture.ko below to /system/lib/modules
- Change hw_config.sh in your /system/etc, add this code at the beginning
Code:
insmod /system/lib/modules/x8gesture.ko #dx: add gestures??..
further details??...i nid help please..everytime i run my terminal i first use the code insmod /system/lib/modules/x8gesture.ko #dx: add gestures...it init module n bla bla bla failed ..( file exists)...i need a step by step guidance..sorry for my noob.....i am new to android.....please guide me step by step...on how to edit the hw_config.sh??,,please...
Copy x8gesture to system\lib\modules, if you can do that its mean you are already mounted system as rw... If not tap the button "mount r/w" on top of for example root explorer(recomended), and then copy it.
Now go to system\etc and long tap on hw_config.sh, chose open in text editor.
Add fallowing line at begining:
insmod \system\lib\modules\x8gesture.ko
Restart phone and thats all. Hope you understend it now.
Wysłano z X8 z użyciem Tapatalk
hmm...but whr to add the line??..before the line of vibrator configuration??...u mean a new paragraph??n wat about tis code?#dx: add gestures
oh no...finnally i noe y....no multi touch is gonna use on my phone for now....coz i juz checked...
For devices that are unable to use x8gesture, try this command in your phone (either with terminal or with adb shell):
Code:
dmesg | grep "cyttsp-i2c"
If you have something like this, that means your X8/X10mini is using Cypress and therefore it will not be supported by x8gesture:
Code:
<6>[ 4.185259] cyttsp_i2c_probe: Successful registration cyttsp-i2c
In this case, because I don't have X8 with Cypress digitizer, I cannot do anything for you guys. I'm sorry.
..........my output is....the same...:'(..is there any modified pinch zoom for me?
i just checked if i have cypress and when i write dmesg | grep "cyttsp-i2c" it says: <4>[ 2.490494] cyttsp-i2c: probe of 0-0024 failed with error -12
so do i have cypress or not?
C:\Documents and Settings\Komp\Pulpit\Xperia\ADB>adb shell
# dmesg | grep "cyttsp-i2c"
dmesg | grep "cyttsp-i2c"
what i have?? good or bad ??
zxc79 said:
C:\Documents and Settings\Komp\Pulpit\Xperia\ADB>adb shell
# dmesg | grep "cyttsp-i2c"
dmesg | grep "cyttsp-i2c"
what i have?? good or bad ??
Click to expand...
Click to collapse
refer to the x8 gesture post to find out..and if you have cypress,that good too because cypress digitizer supports real multitouch...while synaptic only have pinch zooming..if only we could have one of the dev to create a multitouch module for cypress just like the x10minipro which have real multitouch now..
anmiman said:
refer to the x8 gesture post to find out..and if you have cypress,that good too because cypress digitizer supports real multitouch...while synaptic only have pinch zooming..if only we could have one of the dev to create a multitouch module for cypress just like the x10minipro which have real multitouch now..
Click to expand...
Click to collapse
I'm trying to raise the cash to buy cypress x8 for doixanh struggling though.
Sent from my X8 using XDA Premium App
furrabbit.nh said:
I'm trying to raise the cash to buy cypress x8 for doixanh struggling though.
Sent from my X8 using XDA Premium App
Click to expand...
Click to collapse
i would really2 like to donate dude..but im still a kid..i dont have a job or credit card..
So when is sum1 gonna made for our cypress a real multi touch?
lukewong01 said:
So when is sum1 gonna made for our cypress a real multi touch?
Click to expand...
Click to collapse
There was a talking in one of the threads about doixanh will try to do it, but ONLY IF he got a Cypress phone. So I think he should open a PayPal, and we can donate some money for his new Cyp. X8! This is the least we can do! And we _should_ do, because he made us really good modules/ ROMS etc, so it is our duty to support and admit his hard work! Respect the devs! This is the keyword!
anmiman said:
refer to the x8 gesture post to find out..and if you have cypress,that good too because cypress digitizer supports real multitouch...while synaptic only have pinch zooming..if only we could have one of the dev to create a multitouch module for cypress just like the x10minipro which have real multitouch now..
Click to expand...
Click to collapse
That's i have cypress or not??
never never never
furrabbit.nh said:
I'm trying to raise the cash to buy cypress x8 for doixanh struggling though.
Sent from my X8 using XDA Premium App
Click to expand...
Click to collapse
It could be great if other members could help.
Don't forgot that I have propsed to help you...
How much do you think you should collect?
bensabin said:
It could be great if other members could help.
Don't forgot that I have propsed to help you...
How much do you think you should collect?
Click to expand...
Click to collapse
I know I haven't forgot. Well I'm thinking of buying one from same place I got mine from 3 week ago more chance of being cypress then I don't have to mess about returning it. But its £89 brand new from three store.
Sent from my X8 using XDA Premium App
Asycid said:
There was a talking in one of the threads about doixanh will try to do it, but ONLY IF he got a Cypress phone. So I think he should open a PayPal, and we can donate some money for his new Cyp. X8! This is the least we can do! And we _should_ do, because he made us really good modules/ ROMS etc, so it is our duty to support and admit his hard work! Respect the devs! This is the keyword!
Click to expand...
Click to collapse
hmm....i guess so....we will try to donate if we can....anyway..i am a high sch student..
Hi XDA!
Is there a way to install or Temple Run Temple Run 2 Oz on SGY Duos, and run correctly?
I searched many forums and have not found anything.
Sorry for bad english !
No you have to buy a better device. Our GY has arm6.
But you can search for similar
endless run Games.
Look in the apps section / Temple run post, i have written some alternatives.
No way for SGY duos ?
You can only install tr but not able to run it..
If you want to install,
Change build.prop like...
ro.product.cpu.abi2=armeabi-v7a
ro.product.cpu.abi=armeabi
Ok reboot and install tr2 or oz it wiill get install
Sent from my GT-S5360 using xda premium
LetJect said:
You can only install tr but not able to run it..
If you want to install,
Change build.prop like...
ro.product.cpu.abi2=armeabi-v7a
ro.product.cpu.abi=armeabi
Ok reboot and install tr2 or oz it wiill get install
Sent from my GT-S5360 using xda premium
Click to expand...
Click to collapse
are you sure about the changes to be made in build.prop to get it run ??
What Doesn't Kill Makes Me AWESOME
androite said:
are you sure about the changes to be made in build.prop to get it run ??
What Doesn't Kill Makes Me AWESOME
Click to expand...
Click to collapse
Read properly.. You can just install temple run 2 by making those build.prop changes.. You cannot run it
androite said:
are you sure about the changes to be made in build.prop to get it run ??
What Doesn't Kill Makes Me AWESOME
Click to expand...
Click to collapse
Yeah you can only install it...
Sent from my GT-S5360.....
demoslasher said:
Hi XDA!
Is there a way to install or Temple Run Temple Run 2 Oz on SGY Duos, and run correctly?
I searched many forums and have not found anything.
Sorry for bad english !
Click to expand...
Click to collapse
You cannot RUN it on SGY DUOS because of hardware issues. Temple Run Oz are for Armv7 Devices.
Press THANKS please?
TomalinSGY said:
You cannot RUN it on SGY DUOS because of hardware issues. Temple Run Oz are for Armv7 Devices.
Press THANKS please?
Click to expand...
Click to collapse
already said thats not working
dont beg for a thanks, its user choice if thanks given or not...
vitafit said:
already said thats not working
dont beg for a thanks, its user choice if thanks given or not...
Click to expand...
Click to collapse
its ok for someone to ask thanks here in xda.
Project Young said:
its ok for someone to ask thanks here in xda.
Click to expand...
Click to collapse
+1
With a file explorer, navigate to:
Code:
/d/acpuclk/pvs_bin
And if you are running 4.4.2 KitKat:
Code:
/sys/devices/system/soc/soc0/soc_pvs
There will be a number there 0 - 6
If you are an overclock junkie, higher the number the better.
44 views and not a single vote :/
Probably because:
- some do not overclock.
- some do not root.
- or simply do not care.
All of those apply to me.
pacc said:
Probably because:
- some do not overclock.
- some do not root.
- or simply do not care.
All of those apply to me.
Click to expand...
Click to collapse
So being a nice person is unimportant?
Takes 2 seconds to check, and I need the info.
I was only trying to explain why the several post views and few votes.
I can't vote just because I currently have no root. Good luck.
Pvs1
Mine is 0
Sent from my SM-N9005
Im lollipop exynos and i cant find these files! And i like oc soo much. Can i know where to find the file?
Edit: And im using cm12.1
white7561 said:
Im lollipop exynos and i cant find these files! And i like oc soo much. Can i know where to find the file?
Edit: And im using cm12.1
Click to expand...
Click to collapse
either Open Terminal Emulator, and type:
su
dmesg | grep PVS
OR:
Check /proc/cpu/msm_acpu_pvs/
crixley said:
either Open Terminal Emulator, and type:
su
dmesg | grep PVS
OR:
Check /proc/cpu/msm_acpu_pvs/
Click to expand...
Click to collapse
Cpu folder not there