So i want to return my phone to stock so i can try to install The newest ROM from darky,
My problem is that i cant get into recovery mode cause my screen gets all fuzzy with white and colored lines, i believe its because of my bootloader but i cant update cause it gets stuck at SBL.bin so im pretty much stuck in limbo here.
Maybe if i get my phone back to stock i can do everything over again.
what information do i need to know so i can download the proper files?
Thanks in advance for the help.
Can you get the phone into download mode?
nmcc89 said:
Can you get the phone into download mode?
Click to expand...
Click to collapse
Yes i can
Is fastboot working?
Sent from Hell using XDA Application
alidsd said:
Is fastboot working?
Sent from Hell using XDA Application
Click to expand...
Click to collapse
im not sure what that is, let me read about it and see if its working.
ty for the response
alcaet said:
Yes i can
Click to expand...
Click to collapse
Maybe try flashing a stock low level (with bootloaders) rom via odin so that the bootloaders are replaced. And use the latest odin, I think it's 1.82 now, that should reduce your problems flashing.
is all the data lost by returning to stock (is there a way to do it without formatting )
nmcc89 said:
Maybe try flashing a stock low level (with bootloaders) rom via odin so that the bootloaders are replaced. And use the latest odin, I think it's 1.82 now, that should reduce your problems flashing.
Click to expand...
Click to collapse
Ok ill do that, but how do i find a stock low lvl Rom? could you point me in the right direction? i dont wanna brick my phone hahaha ive already messed it up with the bootloader stuff...
this is what i know about my phone
PDA. I9000XWJVH
PHONE: I9000XXJVO
CSSC: I9000XXEEJV3
MODEL NUMBER: GT-I9000
FIRMWARE VERSION: 2.3.3.
BASEBAND VERSION: I9000XXJVO
what else do i need to know ?
Your best bet is to do a bit of reading around just so you know what you're trying to do.
[Ramad]'s thread of stock firmwares is probably the most helpful to you. It's got loads of stock firmware and some detailed instructions, as well as downloads for odin and all the necessary files.
If you're going to flash bootloaders you need a file from this thread that has "sbl" in the filename. From the info you've posted you're PDA is XWJVH, your modem (PHONE) is XXJVO and your CSC is XEEJV3. If you want to keep this setup just find the right download with the bootloaders and you should be good to go. Of course you can always flash another ROM if you'd rather. If you're going for a clean flash also flash with a pit file and repartition checked. All the gingerbread so far use 512.pit but you can always check on samfirmware too.
Also below are a couple of links to general guides (which are stickies in the "Galaxy S I9000 General" section. They've just got a load of useful information for all kinds of things:
Getting the most out of your SGS
General "howto" and tutorial guide
nmcc89 said:
Your best bet is to do a bit of reading around just so you know what you're trying to do.
[Ramad]'s thread of stock firmwares is probably the most helpful to you. It's got loads of stock firmware and some detailed instructions, as well as downloads for odin and all the necessary files.
If you're going to flash bootloaders you need a file from this thread that has "sbl" in the filename. From the info you've posted you're PDA is XWJVH, your modem (PHONE) is XXJVO and your CSC is XEEJV3. If you want to keep this setup just find the right download with the bootloaders and you should be good to go. Of course you can always flash another ROM if you'd rather. If you're going for a clean flash also flash with a pit file and repartition checked. All the gingerbread so far use 512.pit but you can always check on samfirmware too.
Also below are a couple of links to general guides (which are stickies in the "Galaxy S I9000 General" section. They've just got a load of useful information for all kinds of things:
Getting the most out of your SGS
General "howto" and tutorial guide
Click to expand...
Click to collapse
Thanks a bunch!!
im gonna give it a try!
Related
Hi Guys,
I am a novice when it comes to android. I want to root my SGS I9000T and I looked around a lot, but my problem is it seems like it is firmware specific and mine seems to be quire rare.
So here is my firmware specs. If somebody has either the stock files for this version or the files needed to root this version, please provide me of the link. And yes I did look on the samfirmware but it is not there. Or maybe there is a way to root that is not firmware specific?
Any help would be helpful
There is nothing firmware specific about rooting. Just flash speedmod k13e (not k15i thats GB kernel), then boot into recovery and root from the advanced speedmod option. Afterwards you can flash the stock kernel back if you want (It´s the zImage file from your install files) You use a tool called Odin to flash, many tutorials around on how to use it...
Thanks for the reply. I have a question for you: When you flash speedmod do you actually change your firmware? If so, that would be a problem because I cannot find my stock firmware? I am trying to root to be able to nandroid to actually get the firmware.
caribbean_spur said:
Thanks for the reply. I have a question for you: When you flash speedmod do you actually change your firmware? If so, that would be a problem because I cannot find my stock firmware? I am trying to root to be able to nandroid to actually get the firmware.
Click to expand...
Click to collapse
I already posted the I9000TUBJP9 rom on the other thread it's the official kies download , let me clarify this,if you upgrade to oficial I9000TUBJVE gb you can go back directly to UBJP9 froyo because have the same bootloaders ,but if you flash other rom than the official for the I9000T go back to the stock eclair or gingerbread
I9000TUBJP9 http://www.multiupload.com/7GKMJEL7PA
caribbean_spur said:
Thanks for the reply. I have a question for you: When you flash speedmod do you actually change your firmware? If so, that would be a problem because I cannot find my stock firmware? I am trying to root to be able to nandroid to actually get the firmware.
Click to expand...
Click to collapse
No, you change the kernel. You should also be able to root with SuperOneClick, search for it in the forums, you dont have to replace the kernel with this method.
v4mp1 said:
I already posted the I9000TUJV9 rom on the other thread it's the official kies download , let me clarify this,if you upgrade to oficial I9000TUBJVE gb you can go back directly to UBJP9 froyo because have the same bootloaders ,but if you flash other rom than the official for the I9000T go back to the stock eclair or gingerbread
I9000TUBJP http://www.multiupload.com/7GKMJEL7PA
Click to expand...
Click to collapse
Thanks so much! I am guessing you mistypes, but my current version is I9000TUBJP9 (and this is what the file you gave me says) and the version of GB I will be getting through Kies is UBJV6 (not BJVE), right?
So, if I update to GB and want to go back to UBJP9, all I have to do is flash the only tar file extracted from the files you gave me? The flashing methods I read were talking about pit file, pda files and repartion files. I don't need any of that?
{Angel} said:
No, you change the kernel. You should also be able to root with SuperOneClick, search for it in the forums, you dont have to replace the kernel with this method.
Click to expand...
Click to collapse
Thanks a lot for the help. I read up about superoneclick and it should work if I decide to stay on Froyo but won't work if I make the jump to GB. I will try to see if the CF method or the oneclick method work for GB. I am assuming I will find a method that will root GB. I did read a little about the supermod you mentioned to me, but I got confused because I found guide to flash it but they said I needed to be rooted .
caribbean_spur said:
So, if I update to GB and want to go back to UBJP9, all I have to do is flash the only tar file extracted from the files you gave me? The flashing methods I read were talking about pit file, pda files and repartion files. I don't need any of that?
Click to expand...
Click to collapse
Yes, you can go back GB flashing the the tar file on PDA ,the othe method if you use rom not made for the i9000t
v4mp1 said:
Yes, you can go back GB flashing the the tar file on PDA ,the othe method if you use rom not made for the i9000t
Click to expand...
Click to collapse
Thanks so much! Last question. For this type of flash do I need to be rooted?
caribbean_spur said:
Thanks so much! Last question. For this type of flash do I need to be rooted?
Click to expand...
Click to collapse
Well if what you wanted was to move to GB then why the heck didn't you just say that from the beginning and spared us all this useless talk of rooting your phone?? If you dont have a clue about how to do something then its best to say what you want from the get go.
In this case just download whatever firmware you want and flash with Odin, no need to be rooted. Make sure to flash a 850 modem afterwards to get 3G back if you flash a european rom. Check the stickies, plenty of guides on how to flash with Odin and threads with modem files.
Good luck mate.
caribbean_spur said:
Thanks so much! Last question. For this type of flash do I need to be rooted?
Click to expand...
Click to collapse
You can go back and forth with Froyo and GB on Odin with ease. I've done it plenty of times, just make sure that you have repartition checked with the stock files correctly placed in Odin...
Sent from my GT-I9000 using xda premium
Well no need to be nasty! I was pondering if I am going to GB since the first time I did it did not go well, so I am weighing my options. I appreciate that you help me and but I do not appreciate the condescending talk. Everything you guys told me was very useful and I do want to root I was taking one thing at a time.
I read the forum( yes I did) and I have decided that it might be best for me to stay on Froyo for now. and I am planing to root to be able to try other stuff. So again yes you helped me and no it was not useless talk. Thanks again.
I got my galaxy s4 through T-mobile UK. however it seems to be unlocked and unbranded. I cannot confirm its unlocked as I've never tried another sim card in it - but I see no branding and everything suggests it is unbranded.
In the about phone section of the settings it says my baseband is i9505XXUDMH6 but I cannot find a firmware that matches this anywhere! Also, kies won't work with my phone I guess because its got a custom ROM on it and its rooted so there isn't really any way I know of to find out more and the modem and PDA etc..
I have no idea what firmware I need to be looking for? The unbranded UK one off sam mobile is taking 8 hours to download and has stopped halfway through twice now
Any help would be greatly appreciated and I'm sorry if this is not the appropriate forum to ask this question!
I have exactly the same problem with my firmware on Sammobile, never completes the download. A 1.6 Gb filesize for Android firmware is obscene enough to begin with, but not being able to complete the download is driving me mental!
RossFixxed said:
I have exactly the same problem with my firmware on Sammobile, never completes the download. A 1.6 Gb filesize for Android firmware is obscene enough to begin with, but not being able to complete the download is driving me mental!
Click to expand...
Click to collapse
Its awful!
I have been looking into it and I've read that if I flash the unbranded firmware that will work with everything. I don't know what to beleive anymore!
I'm hoping somebody can help because I just want to get back to stock touchwiz!!
Take a look this beaty guide: HERE
Joku1981 said:
Take a look this beaty guide: HERE
Click to expand...
Click to collapse
I've seen that guide before but the firmware it tells me to download is just generic firmware. Will that work with my phone in the UK on my network? :S Also why does that guide have pit files attached? I don't see any mention in the instructions of using them?
If I follow that guide will be phone be back to stock and receive OTA updates again?
imattacus said:
I've seen that guide before but the firmware it tells me to download is just generic firmware. Will that work with my phone in the UK on my network? :S Also why does that guide have pit files attached? I don't see any mention in the instructions of using them?
If I follow that guide will be phone be back to stock and receive OTA updates again?
Click to expand...
Click to collapse
For UK unbranded android 4.3 (latest version)-> HERE
EDIT:- TERAFILE.CO is lil slow and I dont like it either but atm we dont have other choice (STOCK ROM)
- If u prefer this version rooted and Knox Free: HERE
Joku1981 said:
For UK unbranded android 4.3 (latest version)-> HERE
EDIT:- TERAFILE.CO is lil slow and I dont like it either but atm we dont have other choice (STOCK ROM)
- If u prefer this version rooted and Knox Free: HERE
Click to expand...
Click to collapse
Okay, I've been downloading that file for the past hour now luckily! So when (if) this downloads. I can follow that same guide you've linked just using the file I've downloaded in place of the one it provides?
I'm still a little bit confused about those PIT files - I see it changes how the storage on the device is partitioned. Do I want to do that? :S
imattacus said:
Okay, I've been downloading that file for the past hour now luckily! So when (if) this downloads. I can follow that same guide you've linked just using the file I've downloaded in place of the one it provides?
I'm still a little bit confused about those PIT files - I see it changes how the storage on the device is partitioned. Do I want to do that? :S
Click to expand...
Click to collapse
Forget this PIT files now.
Guide for flash with ODIN -> HERE
If you are looking for the Stock Kernel - Stock Recovery or Modem file for the latest Lollipop Update for the TMO Note 4
You can use FLASHIFY to install Kernel or Recovery
You should be able to flash the modem using ODIN 10.6 - http://forum.xda-developers.com/showthread.php?t=2711451
I am not certain about earlier versions of ODIN.
you will find all files here - DOWNLOAD
Stock Rom from Sam Mobile is being uploaded to GOOGLE DRIVE - when it is finished uploading you can access at link above.
Flash in ODIN 10.6
I hope this is helpful
I am not responsible for your actions or your phone.
Not yet considering upgrading to Lollipop as I am not willing to give up Xposed.
Curious though if there could be any benefit or adverse affects in flashing the "Modem" ONLY to KitKat based ROM?
Anyone tried - comments?
modem file is no longer on mediafire. says it's removed.
edit: got it
mocsab said:
If you are looking for the Stock Kernel - Stock Recovery or Modem file for the latest Lollipop Update for the TMO Note 4
You can use FLASHIFY to install Kernel or Recovery
You should be able to flash the modem using ODIN 10.6 - http://forum.xda-developers.com/showthread.php?t=2711451
I am not certain about earlier versions of ODIN.
you will find all three files here - Media Fire Download
If you want to download the full File that I pulled from Sam Mobile - Here you go: Download Stock ROM
Flash in ODIN 10.6
I hope this is helpful
I am not responsible for your actions or your phone.
Click to expand...
Click to collapse
Link is banned. Use a different hosting site please. Thanx!
Still not flash able, but can be made so:
http://forum.xda-developers.com/showthread.php?p=60406657
What slot do you put the modem .bin in?
Phone
Karakoram2 said:
Phone
Click to expand...
Click to collapse
odin 3.10 cp?
Yes.
Cp
From my man's earlier thread.
http://forum.xda-developers.com/showthread.php?p=57126385
Sourav_GangstaYayo said:
Link is banned. Use a different hosting site please. Thanx!
Click to expand...
Click to collapse
Media Fire links removed - not sure why they are banned - they did not force registration or anything - but anyway - they are removed.
I have posted a new link for the Modem - Kernel and Recovery - but will need to post a new link for the STOCK ROM a little later - sorry for any inconvenience -
PS - anyone know why Media Fire is banned? Just curious?
Pretty sure these links work
http://forum.xda-developers.com/showthread.php?p=60406657
lazer9 said:
Not yet considering upgrading to Lollipop as I am not willing to give up Xposed.
Curious though if there could be any benefit or adverse affects in flashing the "Modem" ONLY to KitKat based ROM?
Anyone tried - comments?
Click to expand...
Click to collapse
I totally agree! Fingers crossed that xposed works with TW one day. Yeah, I just flashed the modem file via odin. Works great on KitKat. Tried calls via cellular & WiFi calling, data via LTE & WiFi, tether, and Bluetooth all around. Don't know about battery life yet or signal (cell tower practically in my backyard) but will report any negatives here if found. Oh btw, use cp button for modem on odin. And you we can always flash back to the old MK7 version if there any issues.... Enjoy!
Karakoram2 said:
Pretty sure these links work
http://forum.xda-developers.com/showthread.php?p=60406657
Click to expand...
Click to collapse
The OP loaded them on Google Drive now.
Do we still need install modem file, boot.img and stock kernel even after I flash (through ODIN) the firmware from sammobile? Sorry, I have been installing custom ROMs and trying to get back to stock to see how it works. I thought just flashing firmware would be enough (and I thought this will take care of latest model, boot.img), am I wrong?
No need to flash these if you did the whole deal.
Android_Monsters said:
No need to flash these if you did the whole deal.
Click to expand...
Click to collapse
Thanks, and I can install other baseband firmware N910TUVU1COD6 though mine is N910TUVU1ANK4. Correct? Thanks again, just trying to avoid bricking...
Indeed. These phones are hard to brick
So has flashing this modem to a kitkat frimware and rom change/increased the signal/data speeds?
ElAguila said:
So has flashing this modem to a kitkat frimware and rom change/increased the signal/data speeds?
Click to expand...
Click to collapse
It's possible to have minor improvements through an updated baseband/modem/radio version but nothing miraculous. Sometimes newer versions are worse. Just depends. Mine seems the same so far. We'll see. You can always go back.
mocsab said:
Media Fire links removed - not sure why they are banned - they did not force registration or anything - but anyway - they are removed.
I have posted a new link for the Modem - Kernel and Recovery - but will need to post a new link for the STOCK ROM a little later - sorry for any inconvenience -
PS - anyone know why Media Fire is banned? Just curious?
Click to expand...
Click to collapse
No problem sir. Take ur time. But plz don't do mega. Lol. The links suck. Haha. Anyways sammobile links sucks too!
Hey . I'm trying to update the modem & bootloader for my phone. However, I don't know where the modem is. I have 3 files. I suspect the BL_N9005XXUGBPB2_BOOTLOADER.tar goes into BL?
And then AP_N9005XXUGBPB2_RECOVERY.tar and AP_N9005XXUGBPB2_KERNEL.tar.md5 go into AP? Is one of these the modem driver?
In what order should I do this? Especially the 2 AP files... I'm confused about those .
I would like to also mention that my device is currently rooted, uses TWRP. I want to update to a newer TWRP and then from Android 4.4 to Android 5. I suspect that flashing a new recovery and a new kernel will mean that I also have to do that once I've updated my device's modem.
Thank you in advance!
If you download a stock ROM from Sam mobile.com, unzip it to get a tar.md5 file which is flashed in the PDA slot of Odin 3.07. This method takes the guess work out of trying to figure out what goes where.
Uh, I don't really get it. I don't have a stock ROM nor do I want one. I want to install latest modem / bootloader so then I can install an Android 5 ROM.
The recovery and kernel is stock ones so don't need it. But still you have to find a modem. There is a thread in general section.
Sent from my SM-G925F
Rosli59564 said:
The recovery and kernel is stock ones so don't need it. But still you have to find a modem. There is a thread in general section.
Sent from my SM-G925F
Click to expand...
Click to collapse
Care to link? . There are very many threads about modems in the search result. Becomes very difficult to find what you're looking for sometimes
Note 3 General within the first batch of posts .
Sent from my SM-N920C using XDA-Developers mobile app
JJEgan said:
Note 3 General within the first batch of posts .
Sent from my SM-N920C using XDA-Developers mobile app
Click to expand...
Click to collapse
I do love it when you guys make it difficult for me . Really, I do. I mean, you'd do ANYTHING to NOT post a link . I'm honestly not being sarcastic. But I am amused nevertheless. I did search but I will repeat: there is SO much information that I can't be sure WHAT is correct. I've already been here:
http://forum.xda-developers.com/galaxy-note-3/general/direct-download-bootloaders-modems-t3258803
That's why I even started this topic.
I hope somebody will have the mercy to REALLY read what I ask and come up with a good answer, not vaguely-interested pointers into some vague direction.
I appreciate the time spent here by anybody, I've donated to this community and will gladly continue to do so! You guys rock. And I do appreciate even the vaguely-interested replies .
Yes this is it.
Sent from my SM-G925F
axonn said:
Hey . I'm trying to update the modem & bootloader for my phone. However, I don't know where the modem is. I have 3 files. I suspect the BL_N9005XXUGBPB2_BOOTLOADER.tar goes into BL?
And then AP_N9005XXUGBPB2_RECOVERY.tar and AP_N9005XXUGBPB2_KERNEL.tar.md5 go into AP? Is one of these the modem driver?
In what order should I do this? Especially the 2 AP files... I'm confused about those .
I would like to also mention that my device is currently rooted, uses TWRP. I want to update to a newer TWRP and then from Android 4.4 to Android 5. I suspect that flashing a new recovery and a new kernel will mean that I also have to do that once I've updated my device's modem.
Thank you in advance!
Click to expand...
Click to collapse
No worries bro.
You don't need to bother about these two files. Because, none of these is of your use. You are going to try a different ROM from the stock. Hence, you don't need to install Stock Kernel and Recovery. You need custom kernel which either comes with the ROM or you have to adopt a different one according to your need. As you have rooted your phone, you just need to install TWRP Manager from Play store to update your recovery, give it root access and install 2.8.7.0 recovery which is totally reliable at this point. I think it is explanatory enough
alirazaagha said:
No worries bro.
You don't need to bother about these two files. Because, none of these is of your use. You are going to try a different ROM from the stock. Hence, you don't need to install Stock Kernel and Recovery. You need custom kernel which either comes with the ROM or you have to adopt a different one according to your need. As you have rooted your phone, you just need to install TWRP Manager from Play store to update your recovery, give it root access and install 2.8.7.0 recovery which is totally reliable at this point. I think it is explanatory enough
Click to expand...
Click to collapse
Yes it is. You saved the day again. Thank you! . And in the meantime I also found that the modem is in CP and found some modems around .
Today is the big day! I'm going to do this!
axonn said:
Yes it is. You saved the day again. Thank you! . And in the meantime I also found that the modem is in CP and found some modems around .
Today is the big day! I'm going to do this!
Click to expand...
Click to collapse
Well.... you got a celebratory weekend ahead, I guess
I made these ODIN Flashable Firmware and Modem files for myself. And figured I'd share them here for anyone wanting to upgrade their phone without having to download the entire ROM!
**** Warning!!! FLASH AT YOUR OWN RISK!!! XDA or I am not Responsible for ANY Destruction!! ****
Install Directions:
The procedure I use to install these is, In Odin Untick 'AutoReboot', then load Modem file into AP slot, Flash! When complete, Pull battery for 5 sec. Then REBOOT into Download Mode Again.
Then in Odin, load Firmware file into AP slot, Flash! When Complete, REBOOT!
Done!
N910T ONLY!!
Firmware/Bootloader:
Firmware-N910TUVS2EQE2-Firmware.tar.md5
Modem/Baseband:
Modem-N910TUVS2EQE2-Modem.tar.md5
N910T3 ONLY!!
Firmware/Bootloader:
Firmware-N910T3UVS3EQE2-Firmware.tar.md5
Modem/Baseband:
Modem-N910T3UVS3EQE2-Modem.tar.md5
Enjoy!!
They are for t or t3?
Thanks
Edit. I think they are for t only. Could you upload for t3 or explain which files to use? Can I just extract from official fimware and flash the .bin in odin? If yes, which files should I extract?
will5 said:
They are for t or t3?
Thanks
Edit. I think they are for t only. Could you upload for t3 or explain which files to use? Can I just extract from official fimware and flash the .bin in odin? If yes, which files should I extract?
Click to expand...
Click to collapse
Yes they are for T.
I can make ones for T3.
I have to download rom so it'll be awhile.
@will5 There you go!!
Great. Thanks
Question
Can it be flash with any rom or just stuck and also can it flash if your still in DOK2 baseband
nemesisgx said:
Can it be flash with any rom or just stuck and also can it flash if your still in DOK2 baseband
Click to expand...
Click to collapse
Im a little unsure about your question, so ill try to answer best I can.
Yes this can be flashed with any rom, rom doesnt matter, this is flashed in Odin! It updates your Bootloader and Modem! BUT you must pay attention to what your ROM states. Some ROMS dont work Good with certain Firmware.
About the baseband, This would update it.
Since Im new to the N910T model, Im unsure about the downgrade procedure. So You might want to check that your model can be downgraded back to DOK2 once you update. Just in case your rom dont play nice with new Firmware!!
Hope this answered your question! I added install directions to OP
aaron74 said:
Im a little unsure about your question, so ill try to answer best I can.
Yes this can be flashed with any rom, rom doesnt matter, this is flashed in Odin! It updates your Bootloader and Modem! BUT you must pay attention to what your ROM states. Some ROMS dont work Good with certain Firmware.
About the baseband, This would update it.
Since Im new to the N910T model, Im unsure about the downgrade procedure. So You might want to check that your model can be downgraded back to DOK2 once you update. Just in case your rom dont play nice with new Firmware!!
Hope this answered your question! I added install directions to OP
Click to expand...
Click to collapse
yes thank you i haven't updated my note 4 so im stock on 5.1.1 boot loader and base band as the rom goes is Dr dr.ketan Rom but thanks
Can someone test these with some roms and report back?
having issues with my Note 4 T-mobile
Hi Guys,
I have used my T-mobile Note 4 for years since it came out. I have replace the batteries once, but like a month ago when there was an update my phone keep restarting and turning off. I then had to get another phone because of that I still cant get it to restart even after I bought a new battery, updated the firmware. can some one guide me the right way to do this right. I think I am not doing the flashing the right way.. with oldin, and the correct firmware. after I do that I get this installing updates andriod show and it stops and reboots again. please help. thanks
manishp101 said:
Hi Guys,
I have used my T-mobile Note 4 for years since it came out. I have replace the batteries once, but like a month ago when there was an update my phone keep restarting and turning off. I then had to get another phone because of that I still cant get it to restart even after I bought a new battery, updated the firmware. can some one guide me the right way to do this right. I think I am not doing the flashing the right way.. with oldin, and the correct firmware. after I do that I get this installing updates andriod show and it stops and reboots again. please help. thanks
Click to expand...
Click to collapse
I would highly recommend you start a new thread for this, there are many reasons why a phone could be doing this and you need
to provide more information, like what happened before the phone was restarted, did you have a stock rom or a custom rom, were you trying to flash anything when it started restating, were you rooted, can you boot into recovery or download mode...all these things factor but like I said I would definitively start a new thread because your hijacking someone Else's and it has nothing to do with the topic.
manishp101 said:
Hi Guys,
I have used my T-mobile Note 4 for years since it came out. I have replace the batteries once, but like a month ago when there was an update my phone keep restarting and turning off. I then had to get another phone because of that I still cant get it to restart even after I bought a new battery, updated the firmware. can some one guide me the right way to do this right. I think I am not doing the flashing the right way.. with oldin, and the correct firmware. after I do that I get this installing updates andriod show and it stops and reboots again. please help. thanks
Click to expand...
Click to collapse
Yes bud, you'd get better responses making your own post in question area. As I'm not on here a lot. And only people visiting this thread are few to download this link. I just seen your post.
But since I am here I'll try my best to answer you.
Judging by your post, I'm gonna assume your were on pure stock and took an Ota that went bad? Correct?
2. If you used Odin, and noticed you didn't mention getting errors.
So it leads me to ask are you using this firmware here, because this isn't the complete rom. And that's what you want!
Let me know if this is correct? Plus explain more detail? Model T or T3? Last update you were on and file you tried flashing?
And I'll help you get correct file and such.
EQE2 Modem only on DOK2 base 5.1.1 Rom?
Anyone flash just the Modem as per my title over top a Lollipop build and get any better reception or otherwise results or is this a big no go?
There are new firmware and modem QG1, hope they can be uploaded.-
will5 said:
There are new firmware and modem QG1, hope they can be uploaded.-
Click to expand...
Click to collapse
https://forum.xda-developers.com/note-4-tmobile/development/roms-10-29-2014-t2922618
gmenik6 said:
https://forum.xda-developers.com/note-4-tmobile/development/roms-10-29-2014-t2922618
Click to expand...
Click to collapse
Thanks, but I think those files are only for T1 variant.
Think u' re wrong, you've said to flash bootloader in AP slot (i knew in BL). Modem baseband is CP. AP is for recovery.