[Q] How do i get back to stock - Nook Color Q&A, Help & Troubleshooting

Alright so im a first time "poster" long time "reader" ran into my first problem i cant figure out on my own...
My NC was rooted working fine except for limited visibility in the market place so i tried numerous things to make the market place work correctly eventually upgraded from MN 4.5.6 to MN 4.6.16 in one jump and everything worked fine except marketplace auto closed after starting it.
So i followed a post about how to fix this issue and this lead me to the current situation i am in now where my NC is hanging at the N logo when booting.
Basically id love to get back to stock and start over but ive followed http://forum.xda-developers.com/showthread.php?t=914690&highlight=cwm
and i still get stuck at the N logo.
Not sure what else to try.
Any help would be much appreciated.
Thank you,
Vatel

anyone?
anyone?
please.

Do you have CWR installed? If yes you can follow this http://forum.xda-developers.com/showthread.php?t=945838
Do pay attention to all details, including formatting...
If you don't have CWR installed, did you tried the 8 failed boots method?

Related

[Q] eLocity just quit...won't boot up

I have been running my a7 with dexter's mod 1.4 for about 1 1/2 weeks...everything has gone well. This afternoon I turned on the device and it failed to complete boot. The word Android would come up and then nothing. I tried to reboot, reset, but device would do neither...nor would it turn off completely. I kept trying to take it into recovery mode and then after several tries was able to wipe, do update again, and get everything back as before. What would cause this and should I look for this to happen again? deepmagic
My a7 was running well for about a week since it quit...but today when I booted up device, it failed to recognize sd card...same card used for updating to mod 1.4...same card I've been using to listen to my music, etc...but now won't recognize...I've tried two different micro sdhc cards..formatted, reformatted, but device continues to display mount sd card...all else works fine! Does anyone have any new ideas? I can't even reinstall mod since a7 can't read my cards. Thanks for any input that would be helpful. I understand these issues are ongoing for many out there...what to do?
deepmagic said:
I have been running my a7 with dexter's mod 1.4 for about 1 1/2 weeks...everything has gone well. This afternoon I turned on the device and it failed to complete boot. The word Android would come up and then nothing. I tried to reboot, reset, but device would do neither...nor would it turn off completely. I kept trying to take it into recovery mode and then after several tries was able to wipe, do update again, and get everything back as before. What would cause this and should I look for this to happen again? deepmagic
Click to expand...
Click to collapse
Mine has hung on a black screen on me. Seemed that it didn't fully come out of sleep mode.
I was able to recover by holding the power button for 15 seconds to hard power down. No data loss.
deepmagic said:
I have been running my a7 with dexter's mod 1.4 for about 1 1/2 weeks...everything has gone well. This afternoon I turned on the device and it failed to complete boot. The word Android would come up and then nothing. I tried to reboot, reset, but device would do neither...nor would it turn off completely. I kept trying to take it into recovery mode and then after several tries was able to wipe, do update again, and get everything back as before. What would cause this and should I look for this to happen again? deepmagic
Click to expand...
Click to collapse
Exact same thing happened to me this morning. Tried to reset - not happening. Hard powered down. Don't have time to try anything else right now. I'm new to the forums and new to android. Wish me luck! I've been loving my A7, and much appreciation to Dexter and all the other knowledgeable hackers/modders/posters.
hey the same thing happened 2 me twice. Once the first day after i got it, since i had only had it for 1 day i wiped it reinstalled dexter's mod 1.41 and it worked. First app i installed was backup root. Now, a week later the exact same thing is happening. This time i dont want to wipe it because of all of the apps i have installed, games ive played etc. Any ideas? Could we just try reinstalling dexter's md without wiping? Or wiping reinstalling and recover from a backup?
Also have you installed busybox? I had just installed it both times before it failed to turn on. Maybe its just coincidence but you never know..
-D
Thanks to anyone who can help! and also thanks Dexter for all your hard work as well as everyone else that has contributed to the elocity, im lovin it! (when it works )
success!!!!
I got it to work! I don't have a permanent fix but if it happens again just boot into recovery and reinstall the dexter's mod update 1.41 and it works again! No wiping required. This isn't a permanent fix but it will work until we find one
-Dylan
Hasn't happened to me (yet) but I didn't upgrade to the newest ROM. I'm still using 1.3and it has been very stable. Only issue I've had was when I tried to use Killswitch to go to sleep mode when the cover is shut (great idea) but it didn't work and froze all except the live wallpaper. Weird.
Good luck, guys.
in the event it does happen to you, you might want to check out my apx thread for reflashing the factory firmware if you can't get your tablet unstuck. theres alternatives if you don't want to get stuck again.
The method you outline seems so complex...way above my abilities, but makes me wish I had followed though on some early programming training opportunities. That was the road not travelled.
okantomi; while i wouldn't encourage others to follow thru with procedures they fear would cause more harm, i would mention that if you google up my nick you'll find i've been able to do much w/ android software and devices while not knowing anything about programming. if i can do it, anyone can. i just wanted some themes for my phone.
i'm just an android hobbyist by night (and when i get a chance during the day), and a computer tech by day. no programming expertise, but i can reasonably reverse engineer and port software and components using simple file managers like ztreewin(trialware).
don't be mistaken that the folks out there providing you solutions necessarily know anything about programming or software development. just how to chef up files at different levels. i understand this doesn't go for everybody.
Thanks for the encouragement. I'm impressed with what you've been able to do. It is also nice to read upbeat comments about the A7. There is something sort of special about a device that you really almost have to build yourself... putting so much into it... biting your fingernails to nubs with each ROM flashing. You don't get as attached to any device that is 100 percent complete right out of the box, though of course there would be a lot less aggravation.

Need help with CWM boot issue

Hey guys. I'm trying to figure out what's going wrong with my Transformer. I'm not experienced with Android development/ROM's so please bare with me.
Rooted my first Android device about a month ago. Made a stupid mistake placing the ROM I was planning to use on the external SD card & didn't backup the install I wiped. Recovered with an official Asus ROM & after about two hours fiddling around I managed to root & load my first ROM (Revolver, whoot!). Very pleased with myself!
Have been using the Revolver ROM for a month without any problems. No deep sleep etc, everything worked perfectly. Using the latest version of Clockworkmod, also no issues so far. Strange thing is that since last monday everytime I (re)boot the device it loads CWM instead of the Android OS. I can get back into Android bij holding volume down during boot & choose to cold boot. Not a big issue but very annoying & can't seem to find the fix.
Searched Google & XDA for a solution. Updated Revolver to 1.3.1 beta, also found the repack by Koush for CWM. Tried fixing permissions, clearing cache, clearing dalvik, wiping & starting over, etc. Everything I tried so far does not fix the CWM-loop I seem to be stuck in.
Would really appreciate some help, I'm probably looking in the wrong direction here. Thanks in advance.
Found something
Finally got out of the CWM loop, found a solution here: http://forum.xda-developers.com/showthread.php?t=1622814&page=2
Strange thing is that after I flashed it with the fix CWM changed to the touch mod I recently installed but never seemed to work. If I understand correctly the fix only deleted the first few lines in the config where the boot in recovery flag should be.
Afterwards I factory wiped the unit & flashed it with a clean ROM. Currently re-installing my apps. I do not have a good feeling on this, tablet seems sluggish last couple of days & I can hear a soft click when the unit reboots. Same sort of click a laptop hdd would make.
Think it's dying on me...

[Q] auto-nooter 3.0.0 question

complete noob here, so sorry if i am posting i the wrong place. I tried rooting my nc 1.2.0 but it didnt take, i think i unplugged it too soon. so I did a complete wipe and afterwords the nc was showing my software rev as 1.1.0. I then followed the instructions for auto-nooter 3.0.0 and i got to this point:
6 Your NookColor will reboot when it's done.
That was the hard part, now to the simple stuff.
7 Upon boot unlock your screen.
8 At the Android Welcome Screen skip Sign In.
9 Enable Location Services when given the option.
10 Connect to Wifi and launch Youtube from "Extras".
so here is my problem. After enabling location services(step 9), when i hit next I get a prompt saying:
complete action using
home
softkeys
home simply takes me to the normal nc home screen and softkeys asks for superuser permission the first time and afterwards also goes to the nc home sceen. i have wiped and re-rooted 3 times now with exactly the same results. am i missing something or doing something wrong? is there a different method for rooting that I should be using instead? should i attempt to go back to vers. 1.2.0(not sure how I would do this)? any help anyone could give me would be greatly appreciated as my kids are dying to use the nook and for me to be done "hogging it" thanks in advance
its fixed
ok not sure what gives, but i rebooted again and it seems to work fine now, other than not many apps in the market. I dont know how to delete this post so i just replied. mods feel free to delete

[Q] Tried to update to cm10, couldn't boot, tried to restore to mnooter or cm7, help?

Hi all. I used to mess with my Nook Color a lot around a year and a half ago but recently was just using it to read and occasionally browse. I'm 99% sure I was working with just a nook which was used with manual nooter, so that I had the Google Play store and Zeam launcher with stock B&N as well. I was having issues with things "not being able to update" so I tried to mess around, only realizing too late that I wasn't really interested in cm10 and wanted to stick with zeam. Since then I've been trying to get back to how I started but I'm failing miserably. I've so far tried wiping/factory resetting my device. Installing cm7 from zip, resetting everything using the guide here and installing 1-4-1 cam oc zip from here and still I fail. I can get into the set up screen, but when the device will not find any wifi signal and then freeze without allowing me to type it in under "other". Honestly I'm not sure what else to do now. I just want my nooted device back -__-.
Please let me know if I can submit any more information that can help solve this problem. Thank you for your time.
I'm literally infinitely stuck staring at this screen.
Managed to fix everything. Used section A15. Enjoy anyone who ran into similar trouble.

Accidentally soft-bricked moto g4 plus xt1644

If this has been answered somewhere in this forum I apologize and please direct me to the answer. Back when I got my phone in march I rooted my phone using one of the guides on this discussion page so I could have open wifi tethering. While I did have some hiccups not the least of which being soft-bricking my phone and having to flash what I thought was a stock rom but ended up being a android 7.0 rom that seemed to work fine on my phone. Learning my lesson I made a backup right then and there of the stock install as well as two afterwords once I got everything set up the way I wanted. Flash forward to today my phone is bugging me for a seemingly benign system update and after ignoring it all day I dumbly install it without thinking. Now no matter what I do booting my phone only takes me to the TWRP recovery menu. I have tried running all of my backups and nothing is working. Of course because this has been a couple months the image I used is gone so I can't use that. Would that even work, wtf did I do. Let me know if anyone has an answer I will be eternally grateful
Ok problem solved.... after whiping my phone several times I attempted an install of cypherOS. and well.... it worked. I think I'll stick to this . Just let this post die I guess... I am going to set my alarm and go to bed I am very tired and have work in the morning

Categories

Resources